MS5001 PA Complete Maintenance MANUAL [PDF]

Citation preview

g GE Power Systems Oil & Gas Technical Training



MS5001 PA GAS TURBINE Operation and Maintenance



Training Manual



Customer: AGIP GAS BV LYBIAN BRANCH Plant location: WAFA COAST- LYBIA



g



Nuovo Pignone INDEX CHAP. 1 Page 1.



INTRODUCTION................................................................................................1-1 1.1



STATIONARY APPLICATIONS .............................................................1-1



1.2



MOBILE APPLICATIONS........................................................................1-2



1.3



HISTORICAL NOTES ...............................................................................1-2



1.4



NUOVO PIGNONE GAS TURBINE MANUFACTURING PLANT ......1-3



09-98-E MOD. ARGE 2/S



P. 1-0



g



Nuovo Pignone 1.



INTRODUCTION A gas turbine is an internal combustion motive machine. From all points of view, it can be considered as a self-sufficient system: in fact, it is capable to aspirate and compress ambient air via its own compressor, to enrich the energetic power of air in its own combustion chamber and to convert this power into useful mechanical energy during the expanding process that takes place in its own turbine section. The resulting mechanical energy is transmitted via a coupling to a driven operating machine, which produces work useful for the industrial process in which the gas turbine belongs.



1.1



STATIONARY APPLICATIONS These applications are the subject of this traning course. They are intended for the following industrial uses:



09-98-E MOD. ARGE 2/S



•



Generator drive, in order to produce electric energy by an open cycle.



•



Generator drive, to produce electric energy by a combined cycle.



•



Generator drive, to produce electric energy by co-generation.



•



Compressor drive



•



Pump drive



•



Pipeline compressor drive



•



Pipeline pump drive



•



Particular industrial processes



P. 1-1



g



Nuovo Pignone 1.2



MOBILE APPLICATIONS These applications were the first ones to be introduced in terms of time. They include the following fields:



1.3



•



railways



•



marine propulsion



•



aviation



•



road traction



HISTORICAL NOTES The first gas turbines to be used in operating applications appeared on the market at the end of the Forties; they were generally used in railways and presented the advantage of burning liquid fuel, even of poor quality. In this regard, we will mention the MS3001 turbine built by General Electric, with a power of 4500 HP, which was used just for this purpose. Successive achievements in material technology and extensive research into combustion resulted in rapid improvements in performance, in terms of specific power and efficiency, obtained by increasing maximum temperatures in the thermodynamic cycle. In this matter, three generations of evolution can be defined, distinguished by the maximum temperature (°C) ranges of gases entering the first rotor stage of the turbine:



First generation Second generation Third generation



760