5 0 574 KB
Restoring A Fanuc Robot Image Backup Cycle Power on the Robot (FCTN - 0- 8)
Do a Boot Monitor Start : Hold down F1 and F5 simultaniously while the robot reboots
Restoring A Fanuc Robot Image Backup The Boot Menu will show up Select Item 4 Backup/Restore
Select Item 3 Restore Controller Images
Restoring A Fanuc Robot Image Backup Select Device Containing Image
Select Appropriate Image Folder
Restoring A Fanuc Robot Image Backup Acknowledge Directory
Restore Image 1 - Yes
Restoring A Fanuc Robot Image Backup Restoring Image
Image Restored Press Enter
Restoring A Fanuc Robot Image Backup The Boot Menu will show up Select Item 1 Configuration Menu
Configuration Menu If the Image came from its own backup Choose Item 2 Cold Start (Image Restore Completed) If the Image came from a different Robot Choose Item 3 Controlled Start (F_Number needs to be Updated)
Restoring A Fanuc Robot Image Backup If the Image came from a different Robot Controlled Start (F_Number needs to be Updated) Menu 1 Tool Setup
Change the Current F_Number to the correct number corresponding to the robot located on Ccontroller
Restoring A Fanuc Robot Image Backup Once complete do a cold start FCTN-1
DONE