13 0 70 KB
AISI 1030 Steel, cold drawn, 19-32 mm (0.75-1.25 in) round Categories: Material Notes: Key Words:
Vendors:
Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Medium Carbon Steel Moderate strength and hardness in the as-rolled condition, can be strengthened and hardened by cold work. Fair machinability and weldability. ASTM A545, ASTM A546, ASTM A682, DIN 1.1172, FED QQ-S-635 (C1030), FED QQ-S-700 (C1030), MIL SPEC MIL-S-11310 (CS1030), SAE J403, SAE J412, SAE J414, UNS G10300, ASTM A29, ASTM A108, ASTM A510, ASTM A512, ASTM A519, ASTM A544 No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material.
Physical Properties Metric Density 7.85 g/cc Mechanical Properties Hardness, Brinell Hardness, Knoop
English 0.284 lb/in³
Comments
English
Comments
Metric 149 169
149 169
Converted from Brinell hardness. Converted from Brinell hardness. Converted from Brinell hardness.
Hardness, Rockwell B 80
80
Hardness, Vickers
155
155
Tensile Strength, Ultimate Tensile Strength, Yield Elongation at Break Reduction of Area Modulus of Elasticity Bulk Modulus Poissons Ratio Machinability
525 MPa
76100 psi
440 MPa 12 % 35 % 205 GPa 140 GPa 0.29 70 %
63800 psi 12 % 35 % 29700 ksi 20300 ksi 0.29 70 %
Shear Modulus
80.0 GPa
11600 ksi
In 50 mm Typical for steel Typical for steel Typical For Steel Based on AISI 1212 steel. as 100% machinability Typical for steel
Electrical Properties Metric English Comments Electrical Resistivity 0.0000166 ohm-cm 0.0000166 ohm-cm annealed specimen @Temperature 20.0 @Temperature 68.0 °C °F Thermal Properties
Metric
English
Comments
CTE, linear
11.7 µm/m-°C 6.50 µin/in-°F @Temperature 15.0 - @Temperature 59.0 75.0 °C - 167 °F Specific Heat 0.486 J/g-°C 0.116 BTU/lb-°F annealed Capacity @Temperature @Temperature >=100 °C >=212 °F Thermal Conductivity 51.9 W/m-K 360 BTU-in/hr-ft²°F Component Elements Metric Properties Carbon, C 0.27 - 0.34 % Iron, Fe 98.67 - 99.13 % Manganese, Mn 0.60 - 0.90 % Phosphorous, P