14 0 695 KB
PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP Document No.: MTDF-BBS-MR-0275-3320-A0106-1001
February 20, 2015 Rev. 1 Page 1 of 4
Table of Contents 1.
PAINT MATERIALS FOR CLIENT APPROVAL ............................................................... 2 Table 1.1. International Manufacturer ....................................................................................... 2
2.
PLANT COLORS AND IDENTIFICATION ......................................................................... 2 Table 2.1. Colors For CPI Separator .......................................................................................... 3 Tabel 2.2. Colors For Safety Identification ................................................................................. 3
Annex B – System L1-SS Brand: International Paint ................................................................... 4
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP
February 20, 2015 Rev. 1
Document No.: MTDF-BBS-MR-0275-3320-A0106-1001
Page 2 of 4
1. PAINT MATERIALS FOR CLIENT APPROVAL Materials specified or referenced by manufacturer’s name and/brand are intended to describe the type and quality level of material desired and are not intended to be restrictive or to exclude similar items by other manufacturer. Alternate material require approval from the ENGINEER before being used. Any approval given by the ENGINEER for alternate materials and/or application methods is subject to change if the performance of the alternate materials or application method is later found to be inferior to the specified materials and methods. Approval is limited to application over surfaces operating at and application conditions less severe than the conditions stated in the published literature of the paint material manufacturer. Equipment fabricator shall refer paint supplier product datasheet before applying painting.
Table 1.1. International Manufacturer Type & Paint Supplier
Inorganic Zinc Silicate
Epoxy Zinc Rich
Epoxy Mastic
Acrylic Urethane
Phenolic Epoxy
Silicone Acrylic
Silicone Alumunium
Epoxy MIO
Carbo Zinc 11
Carbo Zinc 859
Carboguard 890
Carbothane 134 HG
Phenoline 1205
Thermaline 4900
Thermaline 4700
Supplier to provide detail to contractor/ owner
Inter Zinc 22
Inter Zinc 52
Interseal 670 HS
Interthane 990
Interthane 228; Interline 850
Intertherm 875
Intertherm 50
Dimetcote 9 Series
Amercoat 68 HS
Amerlock 400/2
Amercoat 450 H Series
Amercoat 90 HS
Amercoat 874 HS
Amercoat 878
Supplier to provide detail to contractor/ owner Supplier to provide detail to contractor/ owner
Carboline
Akzonobel/ International Paint
PPG Amercoat
2. PLANT COLORS AND IDENTIFICATION Painting colors on CPI Separator shall be as per Tabel 2.1. Structure shall be color coded to warn personnel of potensial physical hazard for safety. Safety identification color coding shall be in accordance with the Table 2.2. Except for safety color coding and unless otherwise stated in following tables, the finish colors shall be light ivory for equipment and structural stell. 1. External Coating for CPI Separator Annex B – System L1-SS Brand: International Paint MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP
February 20, 2015 Rev. 1
Document No.: MTDF-BBS-MR-0275-3320-A0106-1001
Page 3 of 4
Table 2.1. Colors For CPI Separator Item Name
Surface Preparation
Priming Coat
Intermediate Coat
Top Coat
CPI SEPARATOR
Near White Metal Blast Cleaning (SSPC SP 10)
High solid epoxy “Interseal 670 HS“ (DFT 125 µ) Thinner GTA 220
Mist Coat “Intethane 990” (DFT 30 µ) Thinner GTA733
Aliphatic polyurethane “Interthane 990” (DFT 50 µ) Thinner GTA733
Color RAL No
Light Gray Min. 175 µ RAL 7038
Tabel 2.2. Colors For Safety Identification This table describes the colors required for safety of Operators. Safety Identification Colors Item To Be Painted
Color
RAL Code
Dangerous obstructions
Black/Yellow Lines sloped at 45° minimum 50% of surface yellow
RAL 9005/1021
Dangerous or exposed parts of machinery
Alert Orange
RAL 2003
Fire-Fighting equipment
Fire Red
RAL 3000
First aid equipment
Dark Green
RAL 6028
Rigging/Lifting items: Davits, Lifting beams, overhead traveling cranes and portal cranes
Static parts Yellow/Black Lines sloped at 45° minimum 50% of surface yellow
RAL 1021/9005
Moving parts Alert Orange
RAL 2003
Top & Bottom of handrails for ladders and stairways, where indicated
Yellow
RAL 1021
Platform Maintenance Deck
Yellow
RAL 1021
Road Marking
White
RAL 9010
Red
RAL 3002
Alert Orange
RAL 2003
Dark Green, White lettering
RAL 6028, RAL 9010
Identification for “Stop” and “Danger”,e.g. flammable liquid containers, emergency stop switches, fire protection equipment and apparatus Identification for marking hazardous parts of machines which may cut, crush, or other wise injure Identification for “Safety” and location of “First Aid”, and “Safety Equipment
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
DFT Micron
PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP
February 20, 2015
Document No.: MTDF-BBS-MR-0275-3320-A0106-1001
Annex B – System L1-SS Brand: International Paint
MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1
Rev. 1 Page 4 of 4