8 0 1 MB
727$/ 727$/),1$ ),1$(/) EXPLORATION PRODUCTION
GENERAL SPECIFICATION PIPING VALVE VESSELS GS PVV 112
Piping material classes
01
07/01
New Revision
00
03/01
First issue
Rev.
Date
Notes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
Contents
1. Scope........................................................................................................................3 2. Reference documents .............................................................................................3 3. Class numbering principles ...................................................................................6 3.1
Generation of number ..................................................................................................... 6
3.2
Letters representing the flanges rating of the class.......................................................... 6
3.3
Numbers representing the main material of the class ...................................................... 6
3.4
Suffixes ........................................................................................................................... 6
4. Abbreviations used (in alphabetical order) ...........................................................7 5. General Notes ..........................................................................................................8 5.1
Units................................................................................................................................ 8
5.2
Design limits and pipe wall thickness .............................................................................. 8
5.3
Pipe diameters ................................................................................................................ 9
5.4
Threaded joints ............................................................................................................... 9
5.5
Jointing of small bore pipes ........................................................................................... 10
5.6
Bends and elbows in small bore piping.......................................................................... 10
5.7
Unions........................................................................................................................... 10
5.8
Bolt tensioners .............................................................................................................. 10
5.9
Valves ........................................................................................................................... 11
5.10
Pipes
5.11
Fittings ........................................................................................................................ 11
5.12
Flanges, blinds and spacers.......................................................................................... 11
5.13
Bolting ........................................................................................................................ 11
5.14
Gaskets ........................................................................................................................ 11
5.15
Slip-on flanges .............................................................................................................. 12
5.16
Miter bends ................................................................................................................... 12
5.17
Glass reinforced plastic materials (GRP)....................................................................... 12
5.18
Branch reinforcement .................................................................................................... 12
5.19
Spectacle blinds ............................................................................................................ 12
........................................................................................................................ 11
6. List of classes........................................................................................................13
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 2/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
1. Scope This specification covers the technical requirements of materials for pipes, fittings, flanges, valves and other piping components for use on process and utility piping systems. This document does not apply to: • Fabricated ducts • Heating, plumbing, ventilation and similar piping inside buildings • Instrumentation tubing • Portions of steam, boilers water and exhaust piping covered by the ASME Code, Section 1 • Pipelines covered by the ASME B 31.4 or B 31.8 codes.
2. Reference documents Standards Reference
Title
ASME B 1.1
Unified Screw Threads
ASME B 1.2
Gages and Gauging for Unified Screw Threads
ASME B 1.20.1
Pipe Threads, general purpose (inch)
ASME B 16.5
Pipe Flanges and Flanged Fittings
ASME B 16.9
Factory Made Wrought Steel Butt-welding Fittings
ASME B 16.10 ASME B 16.11
Face to Face and End to End Dimensions of Valves
ASME B 16.20
Metallic Gaskets for Pipe Flanges - Ring-Joint, Spiral-Wound, and Jacketed
ASME B 16.21
Non-metallic Gaskets for Pipe Flanges
ASME B 16.24
Bronze pipe Flanges and Flanged Fittings
ASME B 16.34
Steel Valves
ASME B 16.36
Steel Orifice Flanges
ASME B 16.47 Serie “A”
Large diameter steel flanges NPS 26 Through NPS 60
ASME B 18.2.1
Square and Hexagonal Bolts and Screws
ASME B 18.2.2
Square and Hexagonal Nuts
ASME B 36.10
Welded and Seamless Wrought Steel Pipe
ASME B 36.19
Stainless Steel Pipe
ASME B 46.1
Surface Texture
DIN 3754
Compressed Asbestos Fiber Sheets, Dimensions, Requirements, Tests
MSS SP 6
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-Ends Flanges of Valves and Fittings
Forged Steel Fittings, Socket-Welding and Threaded
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 3/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
Reference
Title
MSS SP 9
Spot Facing for Bronze, Iron and Steel Flanges
MSS SP 25
Standard Marking System for Valves, Fittings, Flanges and Unions
MSS SP 42
Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt weld Ends
MSS SP 43
Wrought Stainless Steel Butt-Welding Fittings
MSS SP 45
By-pass and Drain Connection Standard
MSS SP 61
Pressure testing of Steel Valves
MSS SP 70
Cast Iron Gate Valves, Flanged and Threaded Ends
MSS SP 72
Ball Valves with Flanged or Butt-Welding Ends for General Service
MSS SP 75
High Test Wrought Welding Fittings
MSS SP 80
Bronze Gate, Globe, Angle and Check Valves
Professional Documents Reference
Title
API 5 L
Line Pipe
API 6D
Pipeline valves
API 6FA
Fire test for Valves
API 594
Wafer-Type Check Valves
API 598
Valves Inspection and Test
API 600
Steel Gate Valves Flanged or Butt-welding Ends
API 601
Metallic Gaskets for Refinery Piping, Double-Jacketed, Corrugated and Spiral Wound
API 602
Compact Steel Gate Valves
API 605
Large Diameter Carbon Steel Flanges
API 607
Fire Test for Soft-Seated Quarter-Turn Valves
API 609
Butterfly Valves Lug-type and Water-type
NACE MR 01-75
Sulfide stress cracking resistant metallic materials for oil field equipment (National Association of Corrosion Engineers)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 4/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
Codes This specification is based on the latest issue of the code ASME B 31.3: “Process Piping”, incorporating all published addenda for all classes, with the exception of refrigerated piping for which the code ASME B 31.5: “Refrigeration Piping” is used (such classes are identified with a suffix letter “R”). Reference
Title
ASME B31.3
Process Piping
ASME B31.5
Refrigeration Piping
Other associated TotalFinaElf General Specifications Reference
Title
GS PVV 101
List of piping documents to be supplied to TotalFinaElf
GS PVV 102
Standard drawings for accessories and equipment of piping
GS PVV 107
Flexibility analysis
GS PVV 109
Allowable nozzle loads on static equipment
GS PVV 111
Piping design specification
GS PVV 113
Block models
GS PVV 114
Design models
GS PVV 115
3D electronic models
GS PVV 116
Model review checklist
GS PVV 119
Piping support design
GS PVV 142
Valves
GS PVV 143
Pipes
GS PVV 144
Fittings
GS PVV 145
Flanges
GS PVV 146
Bolting for piping
GS PVV 147
Gaskets for piping
GS PVV 148
Glass reinforced plastic piping materials (tubes and accessories)
GS PVV 149
Spring hangers and supports
GS PVV 171
Steel piping fabrication
GS PVV 178
Design and erection of glass-reinforced plastic piping system
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 5/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
3. Class numbering principles 3.1 Generation of number The class number shall consist of a capital letter representing the ASME flanges rating, and a two-digit number representing the main material entering into the composition of the material used for the pipes, fittings, flanges, valves, etc., of the piping material class in question. Example:
B
N
01
(Suffix, optional) Rating 150
Carbon steel material
The letters and numbers to be used for numbering piping classes are indicated hereafter:
3.2 Letters representing the flanges rating of the class Rating
125
150
250
300
400
600
900
Letter
A
B
C(1)
D
E(1)
F
G
1500 2500 H
J
(Tracing) Y
(1) Note: these ratings are not normally used.
3.3 Numbers representing the main material of the class 01 to 30:
Carbon steels (digits "X"1 to "X"6 also indicate the corrosion allowance for carbon steels, namely 1.27 to 6 mm) (Digits “X2” indicate steam services fluids)
31 to 45:
Alloy steels (Digits “X2” indicate steam services fluids)
46 to 70:
Stainless steels
71 to 85:
Special alloys (Monel, Hastelloy, etc.)
86 to 99:
Other materials (Cast-iron, copper alloy, GRP, etc.)
3.4 Suffixes The following optional suffixes are used to indicate specific service condition: D = Jacketed piping N = Sour Wet Service (SSCC only) (Specification GS PVV 622, to be used for wet H2S service where HIC is not considered or for amine service) P=
Indicates Pipeline classes derived from the present document but entirely governed by a pipeline code and not complying with the ASME B 31.3 code (These classes are not part of the present document and are issued separately for each particular project)
R = Refrigerated piping (designed according to the ASME B 31.5 code)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 6/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
S=
Sour Wet Service (SSCC and HIC) (Specification GS PVV 612, to be used for wet H2S service)
T=
High temperature service (typically 300°C and above)
4. Abbreviations used (in alphabetical order) ASME American Society of Mechanical Engineers API
American Petroleum Institute
ASTM American Society for Testing and Materials BB
Bolted Bonnet
BC
Bolted Cover
BE
Beveled End
Br
Bronze
MI
Malleable cast Iron
Mo
Molybdenum
MSS
Manufacturers Standardization Society
NPT
Threading as per ASME B 1.20.1
OS&Y Outside Screw spindle and Yoke PE
Plain End
PTFE Teflon
BW
Butt Welding
RF
Raised Face
CAS
Cast Alloy Steel
RJ
Machined face for ring Joint
CCS
Cast Carbon Steel
SAW
Submerged Arc Welded
CS
Carbon Steel
SB
Screwed Bonnet
CuNi
Copper-Nickel
SF
Small Female face
Chromium
SM
Small Male face
Cr EFW
Electric Fusion Welded
SMLS Seamless
ERW
Electric Resistance Welded
SO
Slip-On
ES
Extended Spindle
SP
Standard Practice (MSS)
FAS
Forged Alloy Steel
SPB
FCS
Forged Carbon Steel
SS
Split Body Stainless Steel
FF
Flat Face
STD
Standard
F6
Stainless steel, 13 % Cr
SW
Socket Welding
Gr
Grade
TE
Threaded End
GRP
Glass Reinforced Plastic
TM
Trunnion Mounted
HCP
Hard Chrome Plated
TPE
Top Entry
ISRS
Inside Screw Riser Spindle
WN
Welding Neck
Lap Joint
WB
Welded Bonnet
WC
Welded Cover
LJ
LTCS Low Temperature Carbon Steel
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 7/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
5. General Notes 5.1 Units All units are expressed in the international SI system, except for nominal bore sizes of pipes, which are in inches. Pressures are gauge pressures (in bars), unless otherwise stated. Temperatures are in degrees Celsius. Pressure/Temperature ratings of flanges are based on the latest version of the ASME B 16.5 Standard.
5.2 Design limits and pipe wall thickness 5.2.1 Design limits Pipe wall thickness values that are specified in the Piping Material Specifications are adequate for the full range of pressure/temperature combinations tabulated. 5.2.2 Pipe wall thickness calculation principle The calculation of pipe wall thickness values shall be in accordance with the ASME B 31.3 design code, and shall include a corrosion allowance as well as mill tolerances as applicable. The weld efficiency coefficient of welded pipes shall be equal to 1 (i.e. full radiography). If vacuum drying of lines is required (e.g., on LNG cryogenic services), or on certain specific design conditions involving risk of full or partial pressure conditions (e.g., vapor lines, etc.), pipes wall thickness shall be verified and eventually modified in order to withstand full vacuum conditions; such verification shall be made by the Engineering COMPANY and shall be submitted to TotalFinaElf for approval. 5.2.2.1 Corrosion allowance All carbon steel and low alloy steel materials shall incorporate a minimum corrosion allowance of 1.27 mm. Stainless steels, copper nickels, galvanized carbon steels, glass reinforced materials, and other corrosion resistant materials shall be used without extra-thickness for corrosion allowance. 5.2.2.2 Mill tolerance The mill tolerance on wall thickness shall be as follows: • Minus 8 % for API 5 LX grades in diameters 20" and above • Minus 12 ½ % for all other materials or diameters. (These rules take into account the fabrication tolerances applicable to fittings, with a particular reference to the TotalFinaElf specification no. GS PVV 144).
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 8/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
5.2.2.3 Retirement thickness The minimum wall thickness after reduction by: • Corrosion Allowance • Mill Tolerance • Threading Allowance, where applicable, in accordance with ASME B 1.20.1 shall not be less than the following: Nominal Pipe Size (NPS)
Minimum corroded thickness (retirement thickness)
½" to ¾"
1.0 mm
1" to 8"
1.5 mm
10"
2.3 mm
12" to 14"
2.8 mm
16" to 24"
3.1 mm
26" to 36"
3.8 mm
38" to 46"
4.6 mm
48"
5.3 mm
Above 48"
6.4 mm
Additionally, schedules "5 S" shall not be used for stainless steels, and schedule 80 shall be selected as a minimum for pipes 1”½ in diameter and below. If the wall thickness required to contain the pressure is less than the "Minimum Corroded Thickness", the "Minimum Corroded Thickness" shall be used for pipe wall thickness selection purpose.
5.3 Pipe diameters No pipe diameter smaller than ½" shall be used, except for instruments. Pipe diameters of 1”¼, 2”½, 3”½, 5", 7", 9" and 22" shall not be used. Equipment supplied with connections of these sizes shall be adjusted to a standard size immediately adjacent to the equipment by means of a suitable reducing fitting. Bushings shall not be used. For diameters above 24", sizes 30", 36", 42", 48", 56" and 60" are preferred dimensions.
5.4 Threaded joints 5.4.1 Threads standards All threaded connections shall have taper threads in accordance with ASME B 1.20.1 (NPT) (formerly ASME B 2.1). 5.4.2 Threaded connections limitations Threaded joints are only authorized on utility lines if and where listed on the relevant piping material class.
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 9/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
Threaded joints shall not be used on process service, with the exception of instrument connections which are located downstream a block valve; in such a case, the upstream side of this block valve shall be flanged or may be socket welded on a nipple with a flanged joint immediately upstream to ensure further possible maintenance. However, threaded connections are absolutely not authorized in the following cases (related to particular fluids or services): • Hazardous service, e.g.: - Liquids above their Auto-Ignition Temperature (AIT), or at temperatures greater than 210°C, if the AIT is not known - Flammable liquids flashing on leakage to form a substantial vapor cloud (this includes LNG condensate) - Fluids liable to cause a hazard by blockage due to hydrate formation or solids deposits - Toxic substances, including H2S gas - High pressure air injection (ratings ≥ 900). • General chemical service • Highly corrosive fluids (e.g., acids such as hydrochloric or fluorhydric acids).
5.5 Jointing of small bore pipes With the exception of galvanized systems which shall be joined together only by threaded connections, small bore piping (1”½ and smaller) shall be joined together by socket welding; threaded connections may only be used where permitted under paragraph 5.4.2 of this specification, and butt welding joints shall not be used.
5.6 Bends and elbows in small bore piping In small bore welded piping (1”½ and smaller), hot or cold-formed bends with a radius of 5D min. may be used in lieu of elbows if and where authorized in the relevant piping material class.
5.7 Unions Unions may only be used where threaded connections are authorized by this specification; in general, their use shall be avoided wherever possible. They shall not be used in the following circumstances: • Systems ratings 600 and above • Where design temperature is above 250°C • Cryogenic Temperature Service (Design temperatures < minus 46°C). • Corrosive and Toxic Service (including H2S gas) • Fuel Gas Service.
5.8 Bolt tensioners In systems ratings 600 and above, provision shall be made for the use of hydraulic bolt tensioners on flange stud bolts 50 mm in diameter and larger. Bolting for use with bolt tensioners shall have the normal length increased by one bolt diameter. Bolt extensions beyond the nut shall be protected from corrosion by threaded metal caps.
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 10/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
5.9 Valves All valves shall comply with the requirements of TotalFinaElf specification GS PVV 142. All Ball Valves are meant to be reduced bore, except otherwise indicated on the PID for each individual Ball Valve. Valves of diameter ≤ 1”½ shall have a port size at least equal to the internal bore of the matching pipe. When Ball Valves are installed in lines that are insulated for any purpose other than heat conservation, they shall be provided with extended spindle assembly suitable for making an insulation seal. Extended spindles shall be: • For Valves diameter 2 inches and smaller: 100 mm, plus or minus 10 mm • For Valves diameter 3 inches and larger: 150 mm, plus or minus 10 mm For flanged valves, the extended spindle length is measured from the top of an end flange; for screwed or socket weld valves, it is measured from the top of the valve body. Gate and globe valves located below ground level shall be installed in valve pits, unless otherwise specified. Butterfly valves may be buried, but they shall be provided with an extended spindle with oil-filled outer casing and an aboveground weatherproof gearbox. Forged materials are acceptable in lieu of cast materials. Dual plate check valves are acceptable in lieu of swing check valves. Wafer type check valves are acceptable in lieu of flanged check valves. Instrument connections on either piping or pressure vessels requiring either single or double block and bleed facilities shall be made of an integrated manifold comprising one or two ball valves or needle valves used as block valves and one needle valve used as a bleed. The side of this integrated manifold, which connects to the piping, or the pressure vessel must be flanged, whilst the instrument connection side may be threaded as required.
5.10 Pipes All metallic pipes shall comply with the requirements of TotalFinaElf specification GS PVV 143.
5.11 Fittings All metallic pipefittings shall comply with the requirements of TotalFinaElf specification GS PVV 144.
5.12 Flanges, blinds and spacers All metallic pipe flanges, blinds and spacers shall comply with the requirements of TotalFinaElf specification GS PVV 145. Additionally, blinds and spacers shall conform to one of the appropriate standard drawings of the TotalFinaElf specification GS PVV 102.
5.13 Bolting All bolting for piping shall comply with the requirements of TotalFinaElf specification GS PVV 146.
5.14 Gaskets All gaskets for piping shall comply with the requirements of TotalFinaElf specification GS PVV 147.
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 11/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
5.15 Slip-on flanges The use of slip-on flanges is not generally permitted. They may be used, however, where necessary, for tie-ins, subject to the following restrictions: • Maximum pressure/temperature rating of class 300 • Maximum design temperature of 260°C • Carbon steel materials only • Their use is not permitted in sour, corrosive or severe cyclic services.
5.16 Miter bends Normally, butt weld elbows with a radius of 1.5 D shall be used for all sizes. Miter bends shall not be used except where specifically agreed by TotalFinaElf. In case such an agreement is given, a re-run of the flexibility analysis of the corresponding line is necessary. No agreement may be granted on lines requiring more than 5 % radiographic examination, or being stress relieved, or being subject to sour, corrosive or severe cyclic services.
5.17 Glass reinforced plastic materials (GRP) GRP materials shall comply with TotalFinaElf specification GS PVV 148.
5.18 Branch reinforcement The principle is as follows: • Connections of equal sizes always require an equal Tee. • Connections where both header and branch are of a diameter less than 2 inches are made using Tees (equal or reduced). • All other connections shall be made using branch outlet fittings such as weldolets, sockolets, etc., for branch diameters less than half the header diameter only, and reducing or equal Tees if the branch diameter is equal to half the header diameter or larger. • Special cases may require different rules or means for reinforcing branch connections (including the use of extruded headers, etc.). These must be submitted to TotalFinaElf for decision. • Except for branch connections required to use equal or reduced tees, the use of integral reinforced connections comprising in one single piece: the required reinforcement, a nipple, and eventually an end-flange is permitted. These special fittings shall be supplied from one of the following companies: - GALPERTI ENGINEERING (ITALY) - PROMAT (UK) (Other companies may be considered, subject to TotalFinaElf specific prior approval, which can only be obtained on a case-by-case basis, and based on appropriate code verifications regarding the reinforcement.
5.19 Spectacle blinds Spectacle blinds dimensions (thickness) and materials shall be fully justified by the Engineering COMPANY by appropriate calculations in accordance with the applicable ASME code (i.e., B 31.3 or B 31.5). Detailed calculations shall be submitted to TotalFinaElf for approval.
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 12/21
727$/),1$(/) General Specification GS PVV 112
Date: 07/01 Rev: 01
6. List of classes The list hereafter incorporates all classes currently available within TotalFinaElf organization. For any particular project or application, a list of applicable piping classes shall be issued by the Engineering COMPANY at the basic or detailed engineering stage with the following rules, and under the TotalFinaElf piping department (headquarters) responsibility and supervision: • Except as explained hereafter for pipe schedules and thickness, all classes used for a particular Project shall be strictly identical to those of the present document. • For all classes up to and including 600 rating (classes "A", "B", "D" and "F"), the pipes schedule and/or thickness are calculated up to the maximum pressure/temperature of the mating flanges, which means that the relevant piping classes of this document must be used "as is", without any modifications. • For all classes exceeding 600 rating (classes "G", "H", "J", "K", "L"), pipes schedule and/or thickness shall be calculated with maximum pressure/ temperature design conditions of the related lines only, and not necessarily to the maximum rating of the mating flanges. In such a case, particular piping classes shall be issued by the TotalFinaElf piping department (headquarters) at the request of the Engineering COMPANY, under specific name incorporating appropriate reference to the particular Project. • The Engineering COMPANY shall then issue a "Piping Material Classes" document incorporating all pages (without modifications) of this specification, with the exception of fluid list and piping class list which shall only show the applicable fluids and classes of the Project, with the Project design conditions. The piping classes only applicable to the Project shall also be attached, as well as the related piping branch reinforcement tables (which shall be issued by the Engineering COMPANY). • This particular specification, called "Piping Material Classes" and issued specifically to the Project shall bear a document number derived from the "Corporate" Piping Material Classes (GS PVV 112) as follows: XXX PVV 112, the letters "XXX" being selected to identify the name of the particular Project. The same identification shall be used by the TotalFinaElf piping department (headquarters) when issuing particular individual piping material classes with pipes thickness adapted to the particular Project design conditions (classes "G", "H", "J", "K" and "L", as explained here above). • The final version of this Project particular Piping Material Specification shall be compiled and issued by the Engineering COMPANY, and submitted for approval to TotalFinaElf piping department (headquarters).
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 13/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
A91
125 FF
Material (corrosion in mm) GRP (0)
Date: 07/01 Rev: 01
Symbol
Fluid Oily water sewers (corrosive)
Temperature range (°C) -29 to +65
Non oily water sewers (corrosive) B01
150 RF
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive)
-29 to +220
Pressure drains, Non corrosive flare gas Fuel gas, Fuel oil, Diesel oil, Nitrogen Oily water sewers, Cooling water (non corrosive), Process water (non corrosive) Methanol, Glycol B01N
150 RF
C.S. (1.27)
Lean amine
-29 to +200
B01R
150 RF
C.S. (1.27)
Refrigerated piping per ASME B31.5
-29 to +200
B03
150 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
Corrosive flare gas lines (CO2 light corrosion) B03D
150 RF
C.S. (3)
Liquid sulfur, Acid gas (jacketed lines)
-29 to +270
B03N
150 RF
C.S. (3)
Rich amine, Sodium hydroxide
-29 to +270
B03S
150 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Corrosive flare gas lines (Wet H2S service light corrosion) B05
150 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
-29 to +200
B05S
150 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service medium corrosion)
-29 to +200
B06
150 RF
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
B06S
150 RF
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service heavy corrosion)
-29 to +200
B10
150 RF
C.S. (1.27)
Instrument air, Utility air, Halon gas
-29 to +200
B12
150 RF
C.S. (1.27)
LP steam
B13
150 RF
C.S. (3)
Fire-fighting water (non corrosive)
0 to +270 -29 to +200
Utility water (non corrosive) B19
150 FF
C.S. galvanised (1.27)
Drinking water
-29 to +60
B21
150 RF
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature)
-46 to +200
Non corrosive flare gas (low temperature) B21S
150 RF
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature) (Wet H2S service)
-46 to +200
Non corrosive flare gas (low temperature) (Wet H2S service)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 14/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
B23
150 RF
Material (corrosion in mm) L.T.C.S. (3)
Date: 07/01 Rev: 01
Symbol
Fluid Low temperature hydrocarbons (CO2 light corrosion)
Temperature range (°C) -46 to +200
Low temperature flare gas (CO2 light corrosion) B23N
150 RF
L.T.C.S. (3)
Low temperature flare gas (H2S SSCC light corrosion only)
-46 to +200
B23S
150 RF
L.T.C.S. (3)
Low temperature hydrocarbons (Wet H2S service light corrosion)
-46 to +200
Low temperature flare gas (Wet H2S service light corrosion) B26S
150 RF
L.T.C.S. (6)
Low temperature hydrocarbons (Wet H2S service heavy corrosion)
-46 to +200
Low temperature flare gas (Wet H2S service heavy corrosion) B31
150 RF
3.5 Ni (1.27)
Non corrosive hydrocarbons (cryogenic temperature)
-101 to +200
Non corrosive flare gas (cryogenic temperature) B42
150 RF
Alloy steel 1.25Cr-0.25Mo (1.27)
LP steam superheated
-29 to +405
B46
150 RF
S.S. TP 304L (0)
Cryogenic temperature hydrocarbons
-196 to +200
B47
150 RF
S.S. TP 321 (0)
Cryogenic temperature hydrocarbons
-140 to +200
B48
150 RF
S.S. TP 321 (0)
Corrosive hydrocarbons (H2S + CO2 heavy corrosion), Jet fuel, Lube oil (after filter)
-46 to +200
Seal oil (after filter), Instrument gas (after filter) B50
150 RF
S.S. TP 904L/316L (0)
Corrosion inhibitor, Demulsifier, Antifoam
-46 to +200
B90
150 FF
GRP + CuNi (0)
Fire-fighting water (wet system) (corrosive), Cooling water (corrosive), Utility water (corrosive), Seawater (corrosive)
-29 to +90
B91
150 FF
GRP (0)
Chlorine injection, Oily water sewers (corrosive), Non oily water sewers (corrosive)
-29 to +65
B92
150 RF
CuNi (0)
Fire-fighting water (dry system) (corrosive)
-29 to +90
B93
150 FF
GRP + S.S. TP 321 (0)
Corrosive process water
-29 to +90
D01
300 RF
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Pressure drains, Fuel oil (medium pressure), Nitrogen (medium pressure), Methanol, Glycol
-29 to +200
D01S
300 RF
C.S. (1.27)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Pressure drains (Wet H2S service light corrosion)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 15/21
727$/),1$(/) General Specification GS PVV 112
Material (corrosion in mm)
Date: 07/01 Rev: 01
Class
Flanges rating
D03
300 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
D03N
300 RF
C.S. (3)
Rich caustic, Lean caustic, Caustic soda
-29 to +200
D03S
300 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
D05
300 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
-29 to +200
D05S
300 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service medium corrosion)
-29 to +200
D06
300 RF
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
D21
300 RF
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature)
-46 to +200
Symbol
Fluid
Temperature range (°C)
Non corrosive flare gas (low temperature) D23
300 RF
L.T.C.S. (3)
Low temperature hydrocarbons (CO2 light corrosion)
-46 to +200
Low temperature flare gas (CO2 light corrosion) D23N
300 RF
L.T.C.S. (3)
Low temperature hydrocarbons (H2S SSCC light corrosion only)
-46 to +200
D23S
300 RF
L.T.C.S. (3)
Low temperature hydrocarbons (Wet H2S service light corrosion)
-46 to +200
Low temperature flare gas (Wet H2S service light corrosion) D31
300 RF
3.5 Ni (1.27)
Non corrosive hydrocarbons (cryogenic temperature)
-101 to +200
Non corrosive flare gas (cryogenic temperature) D42
300 RF
Alloy steel 1.25Cr-0.25Mo (1.27)
LP steam superheated
-29 to +405
D46
300 RF
S.S. TP 304L (0)
Cryogenic temperature hydrocarbons
-196 to +200
D47
300 RF
S.S. TP 321 (0)
Cryogenic temperature hydrocarbons
-140 to +200
D48
300 RF
S.S. TP 321 (0)
Corrosive hydrocarbons (H2S + CO2 heavy corrosion), Lube oil (after filter)
-46 to +200
Seal oil (after filter) D50
300 RF
S.S. TP 904L/316L (0)
Corrosion inhibitor, Demulsifier, Antifoam
-46 to +200
F01
600 RF
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Low pressure hydraulic systems, Methanol, Glycol
-29 to +200
F01N
600 RF
C.S. (1.27)
Lean amine
-29 to +200
F03
600 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
F03N
600 RF
C.S. (3)
Rich amine
-29 to +200
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 16/21
727$/),1$(/) General Specification GS PVV 112
Material (corrosion in mm)
Date: 07/01 Rev: 01
Class
Flanges rating
F03S
600 RF
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
F05
600 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
-29 to +200
F05S
600 RF
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service medium corrosion)
-29 to +200
F06
600 RF
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
F06S
600 RF
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service heavy corrosion)
-29 to +200
F12
600 RJ
C.S. (1.27)
HP steam saturated, HP condensate
-29 to +330
F21
600 RF
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature)
-46 to +200
F23
600 RF
L.T.C.S. (3)
Low temperature hydrocarbons (CO2 light corrosion)
-46 to +200
F23S
600 RF
L.T.C.S. (3)
Low temperature hydrocarbons (Wet H2S service light corrosion)
-46 to +200
F26S
600 RF
L.T.C.S. (6)
Low temperature hydrocarbons (Wet H2S service heavy corrosion)
-46 to +200
F31
600 RF
3.5 Ni (1.27)
Non corrosive hydrocarbons (cryogenic temperature)
-101 to +200
F42
600 RJ
Alloy steel 1.25Cr-0.25Mo (1.27)
HP steam superheated
F46
600 RF
S.S. TP 304L (0)
Cryogenic temperature hydrocarbons
-196 to +200
F47
600 RF
S.S. TP 321 (0)
Cryogenic temperature hydrocarbons
-140 to +200
F48
600 RF
S.S. TP 321 (0)
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
-46 to +200
F50
600 RF
S.S. TP 904L/316L (0)
Corrosion inhibitor, Demulsifier, Antifoam
-46 to +200
F70
600 RF
Duplex UNS S31803 (0)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-46 to +200
G01
900 RJ
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Production gas (HP sweet gas), Methanol, Glycol
-29 to +200
G01S
900 RJ
C.S. (1.27)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Symbol
Fluid
Temperature range (°C)
0 to +405
Production gas (Wet H2S service light corrosion) G03
900 RJ
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 light corrosion) G03N
900 RJ
C.S. (3)
Corrosive hydrocarbons (wet H2S service, SSCC light corrosion only)
-29 to +200
Corrosive production gas (wet H2S service, SSCC light corrosion only)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 17/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
G03S
900 RJ
Material (corrosion in mm) C.S. (3)
Date: 07/01 Rev: 01
Symbol
Fluid Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
Temperature range (°C) -29 to +200
Corrosive production gas (wet H2S service light corrosion) G05
900 RJ
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 medium corrosion) G06
900 RJ
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 heavy corrosion) G21
900 RJ
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature)
-46 to +200
G23
900 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (CO2 light corrosion)
-46 to +200
G23N
900 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (H2S SSCC light corrosion only)
-46 to +200
G23S
900 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (Wet H2S service light corrosion)
-46 to +200
G25
900 RJ
L.T.C.S. (5)
Low temperature hydrocarbons (CO2 medium corrosion)
-46 to +200
G31
900 RJ
3.5 Ni (1.27)
Non corrosive hydrocarbons (cryogenic temperature)
-101 to +200
G47
900 RJ
S.S. TP 321 (0)
Cryogenic temperature hydrocarbons
-140 to +200
G48
900 RJ
S.S. TP 321 (0)
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
-46 to +200
G50
900 RJ
S.S. TP 904L/316L (0)
Corrosion inhibitor, Demulsifier, Antifoam
-46 to +200
G70
900 RJ
Duplex UNS S31803 (0)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-46 to +160
H01
1500 RJ
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Production gas (HP sweet gas), Injection water (de-aerated, noncorrosive seawater), MP hydraulic systems, Methanol, Glycol
-29 to +200
H01S
1500 RJ
C.S. (1.27)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Production gas (Wet H2S service light corrosion) H03
1500 RJ
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 light corrosion)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 18/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
H03N
1500 RJ
Material (corrosion in mm) C.S. (3)
Date: 07/01 Rev: 01
Symbol
Fluid Corrosive hydrocarbons (wet H2S service, SSCC light corrosion only)
Temperature range (°C) -29 to +200
Corrosive production gas (wet H2S service, SSCC light corrosion only) H03S
1500 RJ
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Corrosive production gas (wet H2S service light corrosion) H05
1500 RJ
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 medium corrosion) H05S
1500 RJ
C.S. (5)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service medium corrosion)
-29 to +200
Corrosive production gas (HP, wet H2S service medium corrosion) H06
1500 RJ
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 heavy corrosion) H06S
1500 RJ
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service heavy corrosion)
-29 to +200
Corrosive production gas (HP, wet H2S service heavy corrosion) H21
1500 RJ
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature)
-46 to +200
H21S
1500 RJ
L.T.C.S. (1.27)
Non corrosive hydrocarbons (low temperature) (Wet H2S service light corrosion)
-46 to +200
H23
1500 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (CO2 light corrosion)
-46 to +200
H23N
1500 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (H2S SSCC light corrosion only)
-46 to +200
H23S
1500 RJ
L.T.C.S. (3)
Low temperature hydrocarbons (Wet H2S service light corrosion)
-46 to +200
H25
1500 RJ
L.T.C.S. (5)
Low temperature hydrocarbons (CO2 medium corrosion)
-46 to +200
H26
1500 RJ
L.T.C.S. (6)
Low temperature hydrocarbons (CO2 heavy corrosion)
-46 to +200
H26S
1500 RJ
L.T.C.S. (6)
Low temperature hydrocarbons (Wet H2S service heavy corrosion)
-46 to +200
H31
1500 RJ
3.5 Ni (1.27)
Non corrosive hydrocarbons (cryogenic temperature)
-101 to +200
H47
1500 RJ
S.S. TP 321 (0)
Cryogenic temperature hydrocarbons
-140 to +200
H48
1500 RJ
S.S. TP 321 (0)
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
-46 to +200
Corrosion inhibitor “This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 19/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
Material (corrosion in mm)
H50
1500 RJ
S.S. TP 904L/316L (0)
Date: 07/01 Rev: 01
Symbol
Fluid Corrosion inhibitor, Demulsifier,
Temperature range (°C) -46 to +200
Anti-foam H70
1500 RJ
Duplex UNS S31803 (0)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-46 to +135
H73
1500 RJ
Inconel 625
Corrosive hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
-46 to +103
Production gas (gas + liquid + salt water) H74
1500 RJ
Inconel 625
Corrosive hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
-29 to +103
Production gas (gas + liquid + salt water) J01
2500 RJ
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Production gas (HP sweet gas), Injection water (de-aerated, noncorrosive seawater), HP hydraulic systems, Methanol, Glycol
-29 to +200
J01S
2500 RJ
C.S. (1.27)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Production gas (HP, Wet H2S service light corrosion) J03
2500 RJ
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 light corrosion) Injection water (light corrosion) J03S
2500 RJ
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Corrosive production gas (wet H2S service light corrosion) Injection water (wet H2S service light corrosion) J06
2500 RJ
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-29 to +200
Corrosive production gas (HP gas, CO2 heavy corrosion) Injection water (heavy corrosion) J06S
2500 RJ
C.S. (6)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service heavy corrosion)
-29 to +200
Corrosive production gas (HP, wet H2S service heavy corrosion) J26
2500 RJ
L.T.C.S. (6)
Low temperature hydrocarbons (CO2 heavy corrosion)
-46 to +200
J26S
2500 RJ
L.T.C.S. (6)
Low temperature hydrocarbons (Wet H2S service heavy corrosion)
-46 to +200
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 20/21
727$/),1$(/) General Specification GS PVV 112
Class
Flanges rating
J48
2500 RJ
Material (corrosion in mm) S.S. TP 321 (0)
Date: 07/01 Rev: 01
Symbol
Fluid Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
Temperature range (°C) -46 to +200
Corrosion inhibitor J50
2500 RJ
S.S. TP 904L/316L (0)
Corrosion inhibitor, Demulsifier, Antifoam
-46 to +200
J70
2500 RJ
Duplex UNS S31803 (0)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-46 to +150
J73
2500
Inconel 625
Corrosive hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
-29 to +200
Hub Connector
Production gas (gas + liquid + salt water)
K01
API 5000
C.S. (1.27)
Hydrocarbons (gas or liquids) (non corrosive), Production gas (HP sweet gas), Injection water (de-aerated, noncorrosive seawater), HP hydraulic systems, Methanol, Glycol
-29 to +200
K01S
API 5000
C.S. (1.27)
Corrosive hydrocarbons (gas or liquids) (Wet H2S service light corrosion)
-29 to +200
Production gas (HP, Wet H2S service light corrosion) K03
API 5000
L01
C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
API 10000 C.S. (1.27)
Well kill fluid
-29 to +200
L03
API 10000 C.S. (3)
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
-29 to +200
L03N
API 10000 C.S. (3)
Corrosive hydrocarbons (wet H2S service, SSCC light corrosion only)
-29 to +200
Hub Connector L70
API 10000 Duplex UNS S31803 (0)
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
-46 to +175
L73
API 10000 Inconel 625
Corrosive hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
-29 to +200
Hub Connector
Production gas (gas + liquid + salt water)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112.doc
Page 21/21
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
GRP
Rating:
125 Lbs FF
Service:
Oily water sewers (corrosive)
Corrosion allowance:
0 mm
Non oily water sewers (corrosive)
A 91 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
2
3
4
6
Pressure (bars)
10
10
Temperature (°C)
- 29
+ 65
8
10
12
14
16
18
Thickness (mm)
Per specification GS PVV 148 and Manufacturer's standards for 10 bars
Ends
"Bell and Spigot" type
Mat.Spec.
GRP material conforming to specification GS PVV 148
20
Fittings
GRP material identical to pipe material, conforming to specification GS PVV 148, "Bell" ends
Flanges (1) (2)
Fixed GRP flanges, material identical to pipe material, designed to be bonded to the adjacent piece of pipe or fitting ("Bell and spigot" joints), conforming to specification GS PVV 148
Gate valves (1) (3) (4) (5)
125 Lbs Flanged, AluBr body and trim to B148 Gr 9A, OS&Y, BB
24
28
32
36
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BB, OS&Y, Gearbox for diameters 14” and above, Flanged
Ball valves Globe valves (1) (3) (4) (5)
125 Lbs Flanged, AluBr body & trim to B148 Gr9A, OS&Y, BB
125 Lbs, Alu-Br body & trim to B148 Gr95800 OS&Y, BB, Flanged
Plug valves Butterfly valves (1) (3) (4) Check valves (1) (4) (5) Filters Gaskets
Cast Alu-Bronze body and disc to B148 Grade C 95 800, Monel shaft, Nitril sleeve, Gearbox for diameters 8" and above, Flanged or Wafer type 125 Lbs Flanged, AluBr body & trim B148 Gr9A Horizontal piston lift
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BC, Swing type (Inconel spring) or Dual-Plate, Flanged or Wafer type
125 Class Flanged, Alu-Br Y type, SS or bronze strainer (6)
Tee type filters, Cu-Ni as per SD PVV 103
Neoprene flat gaskets, 3 mm thick for diameters up to 6 inches, and 5 mm thick for diameters above 6 inches, SHORE hardness 60 to 70 maximum
Bolting
Studs, A193 B7, metric threads, Hh nuts, A194 2H Reversible obturators, Cu-Ni to B402 UNS alloy no. C 70 600, as per SD PVV 102
Miscellaneous NOTES (1) All valve etc. flanges must be flat facing as they are designed to connect to a GRP system
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(2) Blind flanges shall be made of C.S. material with an overlay of Cu-Ni on the contact face
(9) Swivel plug disc
(3) Valves packing to be CRANE 1066 type, or approved equal
(10) Firesafe and Anti-static
(4) Bores of all valves to suit pipe bores
(11) “Stock finish” facing
(5) "Grade 9 A" equals UNS alloy no. C 95 200; UNS alloy no. C 95 800 is an acceptable alternate material (6) Sizes below 1" and above 20" shall be avoided
(6)
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112
Carbon steel
Rating:
150 Lbs RF
Service:
Hydrocarbons (gas or liquids) (non corrosive). Pressure drains, Non corrosive flare gas, Fuel gas, Fuel oil, Diesel oil, Nitrogen, Oily water sewers, Cooling water (non corrosive), Non corrosive process water, Methanol, Glycol.
Corrosion allowance:
1.27 mm
Diameter Pipes (12)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS Material:
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec.
Fittings
Flanges (11)
2
3
4
6
B 01 Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
19.6
19.6
17.6
13.2
Temperature (°C)
- 29
+ 37
+ 100
+ 220
8
10
40
12
14
16
20
18
20
10
24 20
26
46
Larger sizes according to table below
BE API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB(4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameter 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) Schedules up to 18” and for 24” are acceptable for full vacuum 26
28 10
30
32
34
36 Std
38
40
42
44 XS
46
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
150 Lbs RF
Service:
Lean amine
Corrosion allowance:
1.27 mm
B 01 N Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec. Fittings
Flanges (11)
2
3
4
6
8
40
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
20
18
20
10
24
26
20
30
32
10
36
Std
BE API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier's recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard and with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
Refrigerated piping (non corrosive) according to ASME B31.5
Corrosion allowance:
1.27 mm
B 01 R Date:
07/01
Rev.:
00
Pressure / Temperature limits
Pipes
Diameter
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec.
2
3
4
6
Pressure (bars)
19.6
19.6
17.6
14.0
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
40
10
12
14
20
16 10
18 20 20
24
26
30
32
36
To be caculated
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless
Fittings
3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
Flanges (11)
150 Lbs RF, SW A 105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body , Trim stellite coated for diameters 2” to 4” and F6 for diameter 6” and above, OS&Y, BB, Gearbox for diameter 14” and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6” and Trunnion mounted for diameters 8” and above, Gearbox for diameters 8” and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6”, gearbox for diameters 8” and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2” to 4” and F6 for diameters 6” and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTE (1) (2) (3) (4) (5) (6)
Connections to be calculated by ENGINEERING COMPANY Bending R = 5 dia. to be used wherever possible Flanges as per ANSI B 16.5 Single-piece wedge Removable seat Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7)
Horizontal installation
(8)
PTFE seals temperature limit = 200°C
(9)
Swivel plug disc
(10) Firesafe and Anti-static (11) “Stock finish” facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
Corrosion allowance:
3 mm
Diameter Pipes (12)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive flare gas lines (CO2 light corrosion)
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec.
Fittings
Flanges (11)
2
3
80
B 03 Date:
07/01
Rev.:
00
Pressure / Temperature limits
4
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
6
8
40
10 20
12
14
16
18
30
20 24 26
46
Larger sizes according to table below
20 BE
API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters Gaskets Bolting
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier's recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) Schedules up to 16” and for 20” are acceptable for full vacuum 26
28 Std
30
32
34 20
36
38
40
42 XS
44
46 14.2 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
Liquid sulphur (jacketed line)
Corrosion allowance:
3 mm
Acid gas
B 03 D Date:
07/01
Rev.:
00
Diameter Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
2
3
4
6
80
8
Pressure (bars) (5)
19.6
19.6
17.6
13.9
11.3
Temperature (°C)
- 29
+ 37
+ 100
+ 200
+ 270
10
12 14 16 18 20 24
40
To be calculated
Ends
26
28 19.05 mm
30
36
To be calculated
BE
Mat.Spec.
API 5 L Gr B seamless
API 5 L Gr B - SAW - 100 % radiography
Fittings
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) crosses, concentric/excentric reducers, stub-in, tees, weldolets (1)
Flanges (4)
Reducing slip on flange, 150 Lbs RF, A105 as per pipe schedule, blind flanges (2) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves Ball valves Globe valves Plug valves
Jacketed plug valve, A216 WCB, wrench operated for diam. up to 6", gearbox for diam. 8" and above, Stellite coated, flanged, PTFE seals (3) (6) (7)
Butterfly valves Check valves
A216 WCB Body, Trim stellite coated, Single plate wafer type (3) (6)
Filters Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(5) External pressure 8 barg @ 270°C
(2) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(6) Valves to be designed with oversized flanges of one Diameter of nominal size
(3) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Heating jacket with 2 nozzles SW: NPS 1/2" for valves with a nominal diameter up to 2" NPS 3/4" for valves with a nominal diameter up to 6" NPS 1" for larger diameter
(4) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
150 Lbs RF
Service:
Rich amine
Corrosion allowance:
3 mm
Sodium hydroxide
B 03 N Date:
07/01
Rev.:
00
Pipes (13)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Diameter
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec.
Fittings
Flanges (11)
2
3
80
4
6
Pressure (bars)
19.6
19.6
17.6
13.9
11.3
Temperature (°C )
- 29
+ 37
+ 100
+ 200
+ 270
8
40
10 20
12
14
16
30
18
20
24
26
20
28
30
Std
36 20
BE API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6’’ and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters Gaskets
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier's recommendations. Use as per P&ID indications Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standards and with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 (13) Schedules up to 16” and for 20” are acceptable for full vacuum
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (wet H2S service)
Corrosion allowance:
3 mm
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive flare gas lines (wet H2S service)
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec.
2
3
80
Flanges (11)
Date:
07/01
Rev.:
00
Pressure / Temperature limits
4
6
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
40
10
12
20
14
16
30
18
20
24
26
46
Larger sizes according to table below
20 BE
API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless
Fittings
B 03 S
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6" for diameter 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB, A105 ENP ball, PTEF seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves 800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Check valves Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Gaskets
Tee type filters, carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(9) Swivel plug disc
(2) Bending R = 5 dia. to be used wherever possible
(10) Firesafe and Anti-static
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(11) "Stock finish" facing
(4) Single-pièce wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier's recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 26
28 Std
30
32
34 20
36
38
40
42 XS
44
46 14.2 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (CO2 medium corrosion)
Corrosion allowance:
5 mm (12)
B 05 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
2 160
Mat.Spec.
Fittings
Flanges (11)
3
4
6
Pressure (bars)
19.6
19.6
17.6
Temperature (°C)
- 29
+ 37
+ 100
8
80
10 40
12
14
STD
16 30
18
20
24
STD
30
XS
26
14.0 + 200
34
36
20
BE API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat
(12) Corrosion allowance limited to 3.1 mm only for fitting below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
30
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (wet H2S service)
Corrosion allowance:
5 mm (13)
B 05 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
2
3
160
Mat.Spec.
4
6
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
80
10 40
12
14
STD
16 30
Flanges (11)
20
24
STD
30
XS
26
34
36
20
BE API 5 L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless
Fittings
18
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves 800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Check valves Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending R = 5 dia. to be used wherever possible
(9) Swivel plug disc
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
(5) Removable seat (6) Service pressure according to temperature and supplier's recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(11) "Stock finish" facing
(13) Corrosion allowance limited to 3.1 mm only for fittings below 2 inches
30
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (CO2 heavy corrosion)
Corrosion allowance:
6 mm (12)
B 06 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec.
Fittings
Flanges (11)
2
3 160
4
6
120
80
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10 60
12
14
16
40
18
20 30
24 26 XS
28
30
20
36 30
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6" gearbox for diameters 8" and above
Butterfly valves Check valves Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat
(12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch, and to 3.1 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (13)
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (wet H2S service)
Corrosion allowance:
6 mm (12)
B 06 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec.
2
3 160
4
6
120
80
Pressure (bars)
19.6
19.6
17.7
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10 60
12 14
16
18
40
Flanges (11)
30
24 XS
26
28 20
30
36 30
BE API 5 L Gr B seamless
Fittings
20
API 5 L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A105
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
800 Lbs SW, A105, BC A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and Stellite coated (5) (7) above, Dual-Plate (Wafer type). Horizontal piston lift Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
Filters
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending R = 5 dia. to be used wherever possible
(9) Swivel plug disc
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(11) "Stock finish" facing (12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch, and to 3.1 mm only for fittings below 2 inches (13) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (Galvanised up to 2 inches)
Rating:
150 Lbs RF
Service:
Instrument air
Corrosion allowance:
1.27 mm
Utility air
Diameter
½
¾
1
1½
2
80
Ends
PE
Mat.Spec.
API 5 L Gr B seamless Galvanised to A53 grade B
Fittings
Flanges (3)
Date:
07/01
Rev.:
00
Pressure / Temperature limits
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Halon gas
B 10
3
4
6
40
8
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
20
18
20
10
24
26
20
30
32
10
36
Std
BE API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
3000 Lbs threaded, A105, 45° or 90° elbows (2), couplings, tees, threadolets Galvanised to A153
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs threaded A105, Galvanized to A153
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
800 Lbs threaded, A105, Stellite coated, OS&Y, BB (4)
Gate valves
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves 800 Lbs threaded, A105, Stellite coated OS&Y, BB (5) (7)
Globe valves
A216 WCB Body F6 Trim, Flanged OS&Y, BB (7)
Plug valves Butterfly valves Check valves
800 Lbs threaded, A105, BC, Stellite coated (5) (6) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type)
Filters
600 Class, threaded, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(5) Removable seat
(2) Bending not permitted
(6) Horizontal installation
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above "Stock finish" facing
(7) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
150 Lbs RF
Service:
LP steam
Corrosion allowance:
1.27 mm
B 12 Date:
07/01
Rev.:
00
19.6
19.6
17.6
13.9
11.3
0
+ 37
+ 100
+ 200
+ 270
Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits Pressure (bars) (6)
½
¾
1
Schedule
80
Ends
PE
1½
2
Mat.Spec. Fittings
3
4
8
40
10
12
14
16
20
18
20
10
24
26
46
Larger sizes according to table below
20
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 3000 Lbs SW, A105, 45° or 90° elbows (2), couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) (10) concentric/excentric reducers, stub-in, tees, weldolets (1), crosses (11)
150 RF, SW
Flanges (8)
6
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges (3)
A105
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated, OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves Globe valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (5) (9)
A216 WCB Body F6 Trim, Flanged OS&Y, BB (9) (3)
Plug valves Butterfly valves Check valves
Filters Gaskets
800 Lbs SW, A105, BC, Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type) Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. To be used wherever possible
(8) "Stock finish” facing
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Full vacuum @ 48°C
(10) R = 1 dia. Can be used for jacketing line only (11) Crosses can be used for jacketing line only 26
28 Std
30
32
34
36
38 XS
40
42
44
46 14.2 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (Galvanised up to 2 inches)
Rating:
150 Lbs RF
Service:
Fire-fighting water (non corrosive)
Corrosion allowance:
3 mm
Utility water (non corrosive)
B 13 Date:
07/01
Rev.:
00
Diameter
½
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
¾
1 160
1½
2 80
Ends
PE
Mat.Spec.
API 5 L Gr B seamless Galvanised to A120
Fittings
3
4
6
40
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10 20
12
14
16
30
18 20
20
24 26
Larger sizes according to table below
BE API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs threaded, A105, 45° or 90° elbows (2), couplings, tees, threadolets Galvanised to A120
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs threaded A105, Galvanized to A120
WN, 150 Lbs RF, A105 as per pipe schedule, blind flanges
Flanges (3)
36
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting 800 Lbs threaded, A105, Stellite coated, OS&Y, BB (4)
Gate valves
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves 800 Lbs threaded, A105 Stellite coated OS&Y, BB (5) (7)
Globe valves
A216 WCB Body F6 Trim, Flanged OS&Y, BB (7)
Plug valves Ductile iron body, stainless steel TP 316L disc and shaft, Nitrile lining, Gearbox for diameters 8" and above, Flanged or Wafer type (3)
Butterfly valves Check valves
800 Lbs threaded, A105, BC, Stellite coated (5) (6) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type) or Swing type (flanged, BC)
Filters
600 Class, threaded, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H
Miscellaneous
Reversible obturators, carbon steel as per SD PVV 102 - 6 inches, 150 Lbs fire plugs, non-freezing type 4" 150 Lbs Fire hydrants, non-freezing type, 1 symmetrical 4" union in centre and 2 symmetrical 2"1/2 union on sides - 3" monitoring nozzle, Br and Cu materials, with T operating and 2 blocking segments
NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(6) Horizontal installation
(2) Bending not permitted
(7) Swivel plug disc
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above "Stock finish" facing (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
26
28 Std
30
32
34 20
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Galvanised Carbon steel
Rating:
150 Lbs FF
Service:
Drinking water
Corrosion allowance:
1.27 mm
B 19 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
Mat.Spec. Fittings
Flanges (3)
Gate valves
1½
2
3
4
6
8
Pressure (bars)
10
10
10
Temperature (°C)
- 29
+ 37
+ 60
10
40
12
14
16
18 20
24
36
20 BE
API 5 L Gr B seamless, galvanised to A120 3000 Lbs threaded, A105, 45° or 90° elbows (2), couplings, tees, threadolets Galvanised to A120
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs threaded A105, Galvanized to A120
WN, 150 Lbs FF, A105 as per pipe schedule, blind flanges WN, 300 Lbs FF, Orifice Support Assembly, supplied with bolting
800 Lbs threaded, A105, Stellite coated, OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged
Ball valves Globe valves
800 Lbs threaded, A105 Stellite coated OS&Y, BB (5) (7)
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (7)
Plug valves Butterfly valves Check valves
800 Lbs threaded, A105, BC, Stellite coated (5) (6) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type) or Swing type (flanged, BC)
Filters
600 Class, threaded, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Neoprene flat gaskets, 3 mm thick for diameters up to 6 inches, and 5 mm thick for diameters above 6 inches, SHORE hardness 60 to 70 maximum
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(6) Horizontal installation
(2) Bending R = 5 dia. To be used wherever possible
(7) Swivel plug disc
(3) Flanges as per ANSI B 16.5, flat finish facing (4) Single-piece wedge (5) Removable seat
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
GS PVV 112 CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
1.27 mm
Carbon Steel (LTCS) Non corrosive hydrocarbons (low temperature) Non corrosive flare gas (low temperature)
B 21 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec. Fittings
2
3
4
6
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
40
10
12
14
16
20
18
20
24
10
20
26
46
Larger sizes according to table below
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at -50°F
3000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2, 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Gaskets
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(10) Firesafe and Anti-static (11) "Stock finish" facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
26
28
30
32
34
36
38
40
42
44
46
10
10
10
Std Std
Std
Std
XS
XS
XS
XS
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
1.27 mm
Carbon Steel (LTCS) (12) Non corrosive hydrocarbons (low temperature) (wet H2S service) Non corosive flare gas (low temperature) (wet H2S service)
½
¾
1
Schedule
80
Ends Mat.Spec.
PE
Fittings Flanges (11)
1½
2
3
4
6
Date:
07/01
Rev.:
00
19.6
19.6
- 46
+ 37
Temperature (°C)
Diameter
B 21 S
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
GS PVV 112
8
40
10
12
20
14
16
10
18 20 10
24
17.6
13.9
+ 100
+ 200
26
46
Larger sizes according to table below
20
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at -50°F
3000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters Gaskets Bolting
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2’’ to 4’’ and F316 for diameters 6’’ and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C.
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75. Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 26
28
30
32
34
36
38
40
42
44
46
10
10
10
Std Std
Std
Std
XS
XS
XS
XS
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
GS PVV 112 CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
3 mm
Carbon Steel (LTCS) Low temperature hydrocarbons (CO2 light corrosion) Low temperature flare gas (CO2 light corrosion)
B 23 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec. Fittings
2
3
80
4
6
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
40
20
12
14
16
18
30
20
24
26
46
Larger sizes according to table below
20 BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at -50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2, 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Stock finish" facing 26
28
30
32
34
36
38
40
42
44
46
Std
Std
20
20
20
20
XS
XS
XS
XS
14.2 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
GS PVV 112 CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
3 mm
Carbon Steel (LTCS) (12) Low temperature flare gas (SSCC corrosion)
B 23 N Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends Mat.Spec.
PE
Fittings
Flanges (11)
1½
2
3
80
4
6
40
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10 20
12
14
16
18
30
20
24
26
46
Larger sizes according to table below
20 BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at -50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW A350 LF2, 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters Gaskets Bolting
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 26
28
30
32
34
36
38
40
42
44
46
Std
Std
20
20
20
20
XS
XS
XS
XS
14.2 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
GS PVV 112 CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
3 mm
Carbon Steel (LTCS) (12) Low temperature hydrocarbons (wet H2S service) Low temperature flare gas (wet H2S service)
B 23 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec. Fittings
Flanges (11)
2
3
80
4
6
40
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10 20
12
14
16
30
18
20
24
26
46
Larger sizes according to table below
20 BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at -50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2, 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and anti-static (11) “Stock finish” facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 26
28
30
32
34
36
38
40
42
44
46
Std
Std
20
20
20
20
XS
XS
XS
XS
14.2 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Material: Service:
GS PVV 112 CLASS
Low Temperature
Rating:
150 Lbs RF
Corrosion allowance:
6 mm (13)
Carbon Steel (LTCS) (12) Low temperature hydrocarbons (wet H2S service) Low temperature flare gas (wet H2S service)
B 26 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec.
2
3 160
4
6
120
80
Pressure (bars)
19.6
19.6
17.6
13.9
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10 60
12
14
16
40
20
30
24 XS
26
28 20
36 30
A671 CC65 Cl22 W/S2 at -50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF2
WN, 150 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
30
BE ASTM A 333 Gr 6 seamless
Fittings
18
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW A350 LF2, 316 Trim, PTFE seals Floating ball (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending not permitted
(9) Swivel plug disc
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(11) "Stock finish" facing
(13) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch, and to 3.1 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Cryoge²nic Temperature 3.5 % Ni Steel Non corrosive hydrocarbons (cryogenic temperature)
150 Lbs RF
Corrosion allowance:
1.27 mm
B 31 Date:
07/01
Rev.:
00
Pressure / Temperature limits
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Non corosive flare gas (cryogenic temperature)
Rating:
Schedule Ends Mat.Spec. Fittings
Flanges (11)
½
¾
1
1½
2
80
3
4
6
Pressure (bars)
19.9
19.9
17.6
13.9
Temperature (°C)
- 101
+ 37
+ 100
+ 200
8
40
10
12
14
16
20
PE
18
20
24
32
34
10
36
Std
BE ASTM A 333 Gr 3 seamless
A 333 Gr 3 - SAW - 100 % radiography
3000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF3
A420 WPL-3 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A350 LF3
WN, 150 Lbs RF, A350 LF3 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW A350 LF3 Stellite coated OS&Y, BB (4)
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves
800 Lbs SW A350 LF3, 316 Trim, PTFE seals Floating ball (8)
A350 LF3 or A352 LC3 Body, A350 LF3 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW A350 LF3, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW A350 LF3 PTFE seals (6) Wrench operated
A352 LC3 Body, F316 Trim, Flanged OS&Y, BB (9) A352 LC3, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters Gaskets Bolting
800 Lbs SW, LF3, BC Stellite coated (5) (7) Horizontal piston lift
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF3, Y type, stainless steel strainer
Tee type filters, A420 WPL-3 alloy steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A320 L7, Hh nuts A194 Gr 4 Reversible obturators, 3.5 % Nickel steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Alloy steel 1.25Cr 0.5Mo
Rating:
150 Lbs RF
Service:
LP steam superhead
Corrosion allowance:
1.27 mm
B 42 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec.
Fittings
3
4
6
19.9
19.9
17.6
Temperature (°C)
- 29
+ 37
+ 100 + 200 + 300 + 405
8
40
10
12
14
16
20
18
10
20
24
13.9
10.2
6.3
26
20
A 691 1.25 Cr - SAW - 100 % radiography
3000 Lbs SW A182 Gr F11 CL. 2 45° or 90° elbows (2) coupling, tees, sockolets
A234 WP11 CL. 1 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A182 Gr F11 CL. 2
WN, 150 Lbs RF, A182 Gr F11 CL. 2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
800 Lbs SW, OS&Y A182 Gr F11 CL. 2 Stellite coated, BB (4)
A217 WC6 Body, Trim stellite coated OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4)
Ball valves Globe valves
800 Lbs SW, OS&Y A182 Gr F11 CL. 2 Stellite coated, BB (5)
A217 WC6 Body, Stellite coated, Flanged OS&Y, BB (3) (5)
Plug valves Butterfly valves Check valves
800 Lbs SW, BC A182 Gr F11 CL. 2 Stellite coated (7) (8)
Filters
A217 WC6 Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Swing type, Flanged, BC (3)
600 Lbs, SW, A182 F11 CL. 2 Y type, stainless steel strainer
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B 16, Hh nuts A194 Gr 4 Reversible obturators, A387 Gr 11 CL 2
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Horizontal piston lift
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) “Stock finish” facing
(4) Single-piece wedge for diameters up to 2" and Flexible wedge for diameters 3" and above (5) Swivel plug disc (6) Full vacuum @ 48°C
46
To be calculated
BE ASTM A 335 Gr P11 seamless
Flanges (9) Gate valves
2
Pressure (bars) (6)
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Stainless steel TP 304L
Rating:
150 Lbs RF
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
B 46 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
1½
3
4
6
12
14
16
18
20
24
11.1 + 200
26
46
Larger sizes according to table below
10 S BE
A403 WP 304L as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A182 F304L
WN, 150 Lbs RF, A182 F304L, as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves (14) Ball valves (14)
800 Lbs A182 F304L 316 Trim, PTFE seals(12) Floating ball SW (8) (10) 800 Lbs SW, A182 F 304L, 316 Trim OS&Y, BB (5) (9) (12)
A351 CF8M Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4) (13) A351 CF8M Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10) (13) A351 CF8M Body, 316 Trim, OS&Y, BB, Flanged (9) (13)
800 Lbs SW A182 F304L PTFE seals (6) Wrench operated (12)
A351 CF8M, PTFE seals (6), Flanged (3), wrench operated for diameters up to 6", gearbox for diameters 8" and above (13)
Butterfly valves (14)
Filters
10
13.2 + 100
A312 TP 304L Seamless, or welded (SAW) per ASTM A358 Gr 304L class 1 (100 % radiography)
800 Lbs SW, A182 F304L, 316 Trim OS&Y, BB (4) (12)
Check valves
8
15.8 + 37
3000 Lbs, A182 F304L SW, 45° or 90° elbows couplings, tees, unions, sockolets
Flanges (11)
Globe valves (14)
2
15.8 - 196
A351 CF8M Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13) 800 Lbs SW, BC A182 F304L (5)(7)(12) Horizontal piston lift
A351 CF8M Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F304L, Y type, stainless steel strainer
Gaskets Bolting
Tee type filters, TP 304L Stainless steel, as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 304 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(9) Swivel plug disc
(2) Bending not permitted
(10) Firesafe and Anti-static
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(11) "Stock finish" facing
(4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F 304 is an acceptable alternate for body materials (14) Extended spindle 26
28
30
32 10
34
36
38
40
42 STD
44
46
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Stainless steel TP 321
Rating:
150 Lbs RF
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
B 47 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
1½
2
3
4
6
8
Pressure (bars)
18.9
18.9
16.7
13.9
Temperature (°C)
- 140
+ 37
+ 100
+ 200
10
12
14
16
18
20
24
26
46
Larger sizes according to table below
10 S BE
A312 TP 321 Seamless, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000Lbs, A182 F321 SW, 45° or 90° elbows couplings, tees, unions, sockolets 150 Lbs RF, SW A182 F321
Fittings Flanges (11)
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) WN, 150 Lbs RF, A182 F321, as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves (14)
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4) (13)
Ball valves (14)
800 Lbs A182 F321 (12) 316 Trim, PTFE seals Floating ball SW (8) (10)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10) (13)
Globe valves (14)
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves (14)
800 Lbs SW A182 F321, PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C, PTFE seals (6), Flanged (3), wrench operated for diameters up to 6", gearbox for diameters 8" and above (13)
Butterfly valves (14) Check valves Filters
A351 CF 8C Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13) 800 Lbs SW, BC A182 F321 (5) (7) (12) Horizontal piston lift 600 Class, SW, A182 F321, Y type, stainless steel strainer
Gaskets Bolting
A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13) Tee type filters, TP 321 Stainless steel, as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(10) Firesafe and Anti-static
(2) Bending not permitted
(11) "Stock finish" facing
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(12) Valves bodies may be SS TP 316L
(4) Flexible wedge
(13) Forged steel to ASTM A182 F321 or F 347 is an acceptable alternate for body materials
(5) Removable seat
(14) Extended spindle
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc
26
28
30
32 10
34
36
38
40
42 Std
44
46
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112
Stainless steel TP 321
Rating:
150 Lbs RF
Service:
Corrosive hydrocarbons (H2S + CO2 heavy corrosion) Jet fuel Lube-oil (after filter) Seal oil (after filter) Instrument gas (after filter)
Corrosion allowance:
0 mm
Pipes (15)
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS Material:
Diameter Schedule Ends Mat.Spec.
½
¾
1
1½
2
3
B 48 Date:
07/01
Rev.:
00
Pressure / Temperature limits
4
6
Pressure (bars)
18.9
18.9
16.7
13.2
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
80 S
12
(see note 14)
14
16
18
20
24
26
46
Larger sizes according to table below
10 S
BE
PE
A312 TP 321 Seamless, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography)
Fittings
3000Lbs, A182 F321 SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
150 Lbs RF, SW A182 F321
WN, 150 Lbs RF, A182 F321, as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (3) (4) (13)
Ball valves
800 Lbs A182 F321 (12) 316 Trim, PTFE seals Floating ball SW (8) (10)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (3) (10) (13)
Globe valves
800 Lbs SW, A182 F321, 316 Trim OS&Y
Plug valves
800 Lbs SW A182 F321, PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C, PTFE seals (6), Flanged (3), wrench operated for diameters up to 6", gearbox for diameters 8" and above (13) A351 CF 8C Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13)
Butterfly valves Check valves Filters
800 Lbs SW, BC A182 F321 (5) (7) (12) Horizontal piston lift
A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F321, Y type, stainless steel strainer
Gaskets Bolting
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(10) Firesafe and Anti-static
(2) Bending not permitted
(11) "Stock finish" facing
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(12) Valves bodies may be SS TP 316L
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc
(13) Forged steel to ASTM A182 F321 or F 347 is an acceptable alternate for body materials (14) Acceptable between -46°C and -140°C for blow down situation only (no valve operated below -46°C) (15) Schedules up to 24” are acceptable for full vacuum 26
28
30
32 10
34
36
38
40
42 Std
44
46
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
150 Lbs RF
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Demulsifier
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Anti-foam
B 50 Date:
07/01
Rev.:
00
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec.
1½
Pressure (bars)
15.8
15.8
13.2
11.1
Temperature (°C)
- 46
+ 37
+ 100
+ 200
2
SB 677 UNS N08904 Seamless
Fittings
3000 Lbs, A182 F316L, 45° or 90° elbows couplings, tees, SW
Flanges
150 Lbs RF, SW A182 F316L (2)
Gate valves Ball valves
800 Lbs A182 F316L 316 Trim, PTFE seals Floating ball, SW (5)
Globe valves Plug valves Needle valves
800 Lbs, A182 F316L, 316 Trim, BB, SW
Check valves
800 Lbs, A182 F316L, BC, SW (3) (4) Horizontal piston lift
Filters
600 Class, Tee type, A182 F316L, SW
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B8 M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "Stock finish" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
GRP + Copper - Nickel
Rating:
150 Lbs FF
Service:
Fire-fighting water (Wet systems) (corrosive)
Corrosion allowance:
0 mm
Cooling water (corrosive) Utility water (corrosive)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
½
¾
1
Date:
07/01
Rev.:
00
Pressure / Temperature limits
Seawater (corrosive)
Diameter
B 90
1½
2
3
4
6
8
Pressure (bars)
19.6
19.6
18.7
18.0
Temperature (°C)
- 29
+ 37
+ 65
+ 90
10
12
14
16
18 20
24
28
32
Thickness (mm)
(6)
Per specification GS PVV 148 and Manufacturer’s standards for 18 bars
(6)
Ends
(6)
"Bell and Spigot" type
(6)
Mat.Spec.
(6)
GRP material conforming to specification GS PVV 148
(6)
Fittings
(6)
GRP material identical to pipe material, conforming to specification GS PVV 148, "Bell" ends
(6)
Flanges (1) (2)
(6)
Fixed GRP flanges, material identical to pipe material, designed to be bonded to the adjacent piece of pipe or fitting ("bell and spigot" joints), conforming to specification GS PVV 148
(6)
Gate valves (1) (3) (4) (5)
150 Lbs Flanged, AluBr body & trim to B148 Gr9A, OS&Y, BB
36
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BB, OS&Y, Gearbox for diameters 14’’ and above, Flanged
Ball valves Globe valves (1) (3) (4) (5)
150 Lbs Flanged, Alu- 150 Lbs, Alu-Br body Br body & trim to B148 & trim B148 G 95 800 Gr9A, OS&Y, BB OS&Y, BB, Flanged
Plug valves Cast Alu-Bronze body and disc to B148 Grade C 95 800, Monel shaft, or carbon steel body plus nitril sleeve, Gearbox for diameters 8" and above, Flanged or Wafer type
Butterfly valves (1) (3) (4) Check valves (1) (4) (5) Filters Gaskets
150 Lbs Flanged, AluBr body & trim B148 Gr 9A Horizontal piston lift
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BC, Swing type (Inconel spring) or Dual-Plate, Flanged or Wafer type
150 Class Flanged, Alu-Br Y type, SS or bronze strainer (6)
Tee type filters, Cu-Ni as per SD PVV 103, flanged
Neoprene flat gaskets, 3 mm thick for diameters up to 6 inches, and 5 mm thick for diameters above 6 inches, SHORE hardness 60 to 70 maximum
(6)
Bolting
Studs A193 B7, Hh nuts A194 2H
Miscellaneous
Reversible obturators, Cu-Ni to B402 UNS alloy no. C 70 600, as per SD PVV 102 - 6 inches, 150 Lbs fire plugs, nonfreezing type - 4" 150 Lbs Fire hydrants, non-freezing type, 1 symmetrical 4" union in centre and 2 symmetrical 2”1/2 union on sides - 3" monitoring nozzle, Br and Cu materials, with T operating and 2 blocking segments
NOTES (1) All valve, etc., flanges up to 20" must be flat facing as they are designed to connect to a GRP system
(5) "Grade 9 A" equals UNS alloy no. C 95 200. UNS alloy no. C 95 800 is an acceptable alternate material
(2) Blind flanges shall be made of C.S. material with an overlay of Cu-Ni on the contact face
(6) Sizes below 1" should be avoided. Sizes above 20" (and also sizes below 1" if absolutely required) shall be made of Cu-Ni material identical to class B92, including for facing of flanges and gaskets
(3) Valves packing to be CRANE 1066 type, or approved equal (4) Bores of all valves to suit pipe bores
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
GRP
Rating:
150 Lbs FF
Service:
Chlorine injection
Corrosion allowance:
0 mm
Oily water sewers (corrosive)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Non oily water sewers (corrosive)
½
¾
1
1½
2
B 91 Date:
07/01
Rev.:
00
Pressure / Temperature limits
3
4
6
8
Pressure (bars)
12
12
Temperature (°C)
- 29
+ 65
10
12
14
16
18
20
24
Thickness (mm)
Per specification GS PVV 148 and Manufacturer’s standards for 12 bars
Ends
"Bell and Spigot" type
Mat.Spec.
GRP material conforming to specification GS PVV 148
Fittings
GRP material identical to pipe material, conforming to specification GS PVV 148, "Bell" ends
Flanges (1) (2)
Fixed GRP flanges, material identical to pipe material, designed to be bonded to the adjacent piece of pipe or fitting ("bell and spigot" joints), conforming to specification GS PVV 148
Gate valves (1) (3) (4) (5)
150 Lbs Flanged, AluBr body & trim to B148 Gr 9A, OS&Y, BB
28 32
36
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BB, OS&Y, Gearbox for diameters 14" and above, Flanged
Ball valves Globe valves (1) (3) (4) (5)
150 Lbs, Alu-Br body 150 Lbs Flanged, Alu& trim to B148 Br body & trim to B148 Gr 95 800 OS&Y, BB, Gr 9A, OS&Y, BB Flanged
Plug valves Butterfly valves (1) (3) (4) Check valves (1) (4) (5)
Filters Gaskets
Cast Alu-Bronze body and disc to B148 Grade C 95 800, Monel shaft, or carbon steel body plus nitril sleeve, Gearbox for diameters 8" and above, Flanged or Wafer type 150 Lbs Flanged, AluBr body & trim B148 Gr 9A Horizontal piston lift
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BC, Swing type (Inconel spring) or Dual-Plate, Flanged or Wafer type
150 Class Flanged, Alu-Br Y type, SS or bronze strainer (6)
Tee type filters, Cu-Ni as per SD PVV 103
Neoprene flat gaskets, 3 mm thick for diameters up to 6 inches, and 5 mm thick for diameters above 6 inches, SHORE hardness 60 to 70 maximum
Bolting
(6)
Studs A193 B7, Hh nuts A194 2H Reversible obturators, Cu-Ni to B402 UNS alloy no. C 70 600, as per SD PVV 102
Miscellaneous NOTES (1) All valve, etc., flanges must be flat facing as they are designed to connect to a GRP system
(5) "Grade 9 A" equals UNS alloy no. C 95 200. UNS alloy no. C 95 800 is an acceptable alternate material
(2) Blind flanges shall be made of C.S. material with an overlay of CuNi on the contact face
(6) Sizes below 1" above 28" shall be avoided
(3) Valves packing to be CRANE 1066 type, or approved equal (4) Bores of all valves to suit pipe bores
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Copper - Nickel
Rating:
150 Lbs RF
Service:
Fire Fighting Water (Dry systems) (corrosive)
Corrosion allowance:
0 mm
B 92 Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits Pressure (bars)
19.6
19.6
18.7
18.0
Temperature (°C)
- 29
+ 37
+ 65
+ 90
Diameter
½
¾
1
1½
2
3
4
6
8
10
12
14
16
18
20
24
28
32
36
Thickness (mm)
3
3
3.5
4
2.5
2.5
3
3
4
5
6
6.5
7.5
8
9
11
13
15
17
Ends Mat.Spec.
PE
BE
BS 2871 Gr CN 102, seamless, or BS 2870/2875 Gr CN 102 - 0 welded, annealed, and 100 % radiographed
Fittings (1)
3000 Lbs SW, tees, 45° or 90° elbows, couplings, sockolets, Cu-Ni to grade CN 102 (6)
Cu-Ni, seamless, to grade CN 102 (per Manufacturers standards), as per pipe thickness, BW, 45° or 90° elbows (r = 1.5 dia.), 100 % radiographed if welded, concentric/excentric reducers, stub-in tees, weldolets
Flanges (2) (7)
150 Lbs Composite type (C.S.+Cu-Ni) "Stock finish", SW
WN, 150 Lbs, Composite type (C.S. + Cu-Ni), as per pipe schedule, "Stock finish", Blinds : A105 + Cu-Ni overlay on the contact face
Gate valves (3) (4) (5)
800 Lbs SW, Alu-Br body & trim to B148 Gr 9A, OS&Y, BB
Cast Alu-Bronze body and trim to B148 Grade C 95 800, BB, OS&Y, Gearbox for diameters 14" and above, Flanged
Ball valves Globe valves (3) (4) (5)
800 Lbs SW, Alu-Br body & trim to B148 Gr 9A, OS&Y, BB
150 Lbs, Alu-Br body & trim B148 Gr 95800 OS&Y, BB, Flanged
Plug valves Cast Alu-Bronze body and disc to B148 Grade C 95800, Monel shaft, or carbon steel body plus nitril sleeve, Gearbox for diameters 8’’ and above, Flanged or Wafer type
Butterfly valves (3) (4) Check valves (4) (5) Filters
800 Lbs SW, Alu-Br body & trim B148 Gr9A Horizontal piston lift
Cast Alu-Bronze body and trim to B148 Grade C95 800, BC, Swing type (Inconel spring) or Dual-Plate, Flanged or Wafer type
600 Class, SW, Alu-Bronze, Y type, SS or bronze strainer
Tee type filters, Cu-Ni as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H
Miscellaneous
Reversible obturators, Cu-Ni to B402 UNS alloy no. C 70 600, as per SD PVV 102 - 6 inches, 150 Lbs fire plugs, nonfreezing type - 4" 150 Lbs Fire hydrants, non-freezing type, 1 symmetrical 4" union in centre and 2 symmetrical 2”1/2 union on sides - 3" monitoring nozzle, Br and Cu materials, with T operating and 2 blocking segments
NOTES (1) Branch connections to be reinforced as necessary, in accordance with BS MA 18 (2) Composite flanges to have stub ends in Cu-Ni to BS 2875 Grade CN 102 with loose flange in C.S. the drilling and outside dimensions of which per ANSI B 16.5, bored to suit pipe and inner flange OD (3) Valves packing to be CRANE 1066 type, or aproved equal
(4) Bores of all valves to suit pipe bores (5) "Grade 9 A" equals UNS alloy no. C 95 200. UNS alloy no. C95 800 is an acceptable alternate material (6) Alu-bronze fittings to BS 2874 Gr CA 104 or equal are acceptable replacement material in lieu of Cu-Ni (7) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
GRP + SS TP 321
Rating:
150 Lbs FF
Service:
Corrosive process water
Corrosion allowance:
0 mm
B 93 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
2
3
4
6
Pressure (bars)
18.9
18.9
17.7
16.6
Temperature (°C)
- 29
+ 37
+ 65
+ 90
8
10
12
14
16
18
20
24
28
32
Thickness (mm)
(7)
Per specification GS PVV 148 and Manufacturer’s standards for 18 bars
(7)
Ends
(7)
"Bell and Spigot" type
(7)
Mat.Spec.
(7)
GRP material conforming to specification GS PVV 148
(7)
Fittings
(7)
GRP material identical to pipe material, conforming to specification GS PVV 148, "Bell" ends
(7)
Flanges (1) (2)
(7)
Fixed GRP flanges, material identical to pipe material, designed to be bonded to the adjacent piece of pipe or fitting ("bell and spigot" joints), conforming to specification GS PVV 148
(7)
Gate valves (1) (3)
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (11)
Ball valves (1) (3)
800 Lbs A182 F321 (11) 316 Trim, PTFE seals Floating ball SW (9)
Globe valves (1) (3)
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (6) (10) (11)
Plug valves (1) (3)
800 Lbs SW A182 F321, PTFE seals (5) Wrench operated (11)
A351 CF8M Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 14" and above, Flanged (4) (12) A351 CF8M Body, Type 316 Trim material, PTFE seal (9) TPE or SPB, Floating ball for diameters up to 6" and Trunnion mounted for diameters 8" and above, Gearbox for diameters 8" and above, Flanged (12) A351 CF8M Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF8M, PTFE seals (5), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above (12)
Butterfly valves (1) (3) Check valves (1) (3) Filters Gaskets
36
A351 CF8M Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (12) 800 Lbs SW, BC A182 F321 (6)(8)(11) Horizontal piston lift
A351 CF8M Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (12)
600 Class, SW, A182 F321, Y type, stainless steel strainer (7)
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Neoprene flat gaskets, 3 mm thick for diameters up to 6 inches, and 5 mm thick for diameters above 6 inches, SHORE hardness 60 to 70 maximum
Bolting
(7)
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) All valve, etc., flanges up to 20" must be flat facing as they are designed to connect to a GRP system (2) Blind flanges shall be made of C.S. material with an overlay of CuNi on the contact face (3) Bores of all valves to suit pipe bores (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (6) Removable seat
(7) Sizes below 1" should be avoided. Sizes above 20" (and also sizes below 1" if absolutely required) shall be made of Stainless steel material identical to class B48, including for facing of flanges and gaskets (8) Horizontal installation (9) PTFE seals temperature limit = 200°C (10) Swivel plug disc (11) Valves bodies may be SS TP 316L (12) Forged steel to ASTM A182 F321 is an acceptable alternate for body materials
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
300 Lbs RF
Service:
Hydrocarbons (gas or liquids) (non corrosive)
Corrosion allowance:
1.27 mm
Pressure drains, hydrocarbons (non corrosive)
07/01
Rev.:
00
Nitrogen (medium pressure)
Pressure (bars)
51.0
51.0
46.3
43.8
Methanol, Glycol
Temperature (°C)
- 29
+ 37
+ 100
+ 200
Diameter Pipes
Date:
Pressure / Temperature limits
Fuel oil (medium pressure) “This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
D 01
½
¾
1
Schedule Ends
1½
Flanges (11)
3
80
4
6
40
8 20
10
12
14
16
30
40
18
20
24
26
30
To be calculated
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
36
BE
PE
Mat.Spec. Fittings
2
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
300 Lbs RF
Service:
Hydrocarbons (gas or liquids) (wet H2S service)
Corrosion allowance:
1.27 mm
Pressure drains hydrocarbons (wet H2S service)
D 01 S Date:
07/01
Rev.:
00
Diameter
½
¾
1
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Ends
1½
Flanges (11)
3
80
4
6
40
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8 20
10
12
14
30
PE
Mat.Spec.
Fittings
2
Pressure (bars)
16
18 20
40
30
24
26
To be calculated
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
(10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve material shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (gas or liquids) (CO2 light corrosion)
Corrosion allowance:
3 mm
D 03 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
2
Flanges (11)
4
6
8
80
Mat.Spec. Fittings
3
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
18
20
24
26
40
To be calculated BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
36
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
300 Lbs RF
Service:
Rich caustic
Corrosion allowance:
3 mm
Lean caustic
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
½
¾
1
Schedule
160
Ends
PE
1½
2
Flanges (11)
3
4
6
8
80
Mat.Spec. Fittings
Date:
07/01
Rev.:
00
Pressure / Temperature limits
Caustic soda
Diameter
D 03 N
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
18
20
24
26
40
To be calculated BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
36
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
3 mm
D 03 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
2
Flanges (11)
4
6
8
80
Mat.Spec. Fittings
3
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
18
20
24
26
40
To be calculated BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
36
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (CO2 medium corrosion)
Corrosion allowance:
5 mm (12)
D 05 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
2 160
Mat.Spec. Fittings
Flanges (11)
3
4
6
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
80
10 60
12
14
16
18
XS
20
24
26
46
Larger sizes according to table below
60 BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) Corrosion allowance limited to 3.1 mm only for fittings below 2 inches 26
28
30
32
34
36
38
40
42
44
46
20.6 mm
20.6 mm
22.2 mm
23.8 mm
23.8 mm
25.4 mm
26.9 mm
26.9 mm
28.5 mm
30.1 mm
31.7 mm
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel (12)
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
5 mm (13)
D 05 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
2 160
Mat.Spec. Fittings
Flanges (11)
3
4
6
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
80
10 60
12
14
16
XS
18
20
24
26
60
To be calculated
BE API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
36
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 3.1 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Carbon steel
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
6 mm (12)
D 06 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec. Fittings
Flanges (11)
2
3 160
4
6
120
8
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
80
16
18
20
24 26
60
36
To be calculated
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A105
WN, 300 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES
(1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc (10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat
(12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch, and to 3.1 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS
Material:
Low temperature Carbon Steel (LTCS)
Service:
Non corrosive hydrocarbons (low temperature) Non corrosive flare gas (low temperature)
Rating:
300 Lbs RF
Corrosion allowance:
1.27 mm
D 21 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
1½
80
Ends
3
4
6
40
51
51
46.3
43.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8 20
10
12
14
16
30
PE
Mat.Spec. Fittings
2
Pressure (bars)
40
18
20
24 26
30
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
3000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A350 LF2
WN, 300 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
36
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2 Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES
(2) Bending not permitted
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(7) Horizontal installation
(1) Connections to be calculated by ENGINEERING COMPANY
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
Service:
CLASS
Low Temperature Carbon Steel (LTCS)
Material:
GS PVV 112
Low temperature hydrocarbons (CO2 light corrosion) Low temperature flare gas (CO2 light corrosion)
Rating:
300 Lbs RF
Corrosion allowance:
3 mm
D 23 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec. Fittings
2
3
4
6
80
Pressure (bars)
51
51
46.3
43.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
12
14
16
40
18 XS
20
24 26 40
To be calculated
BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A350 LF2
WN, 300 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
36
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2 Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112
Material: Service:
Low temperature hydrocarbons (SSCC corrosion)
Rating:
300 Lbs RF
Corrosion allowance:
3 mm
D 23 N Date:
07/01
Rev.:
00
Pressure / Temperature limits
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS Low temperature Carbon Steel (LTCS) (12)
½
¾
1
Schedule
160
Ends
PE
1½
2
3
4
6
Pressure (bars)
51.0
51.0
46.3
43.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
80
10
12
14
16
40
18 XS
20
24 40
26
36
To be calculated
BE
Mat.Spec.
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
Fittings
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
Flanges (11)
300 Lbs RF, SW A350 LF2
WN, 300 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2” to 4” and F316 for diameters 6” and above, OS&Y, BB, Gearbox for diameter 10” and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A 350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4” and Trunnion mounted for diameters 6” and above, Gearbox for diameters 8” and above, Flanged (3) (10)
Globe valves
800 Lbs, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged, OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6” gearbox for diameters 8” and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2” to 4” and F316 for diameters 6” and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2 Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM
Miscellaneous
Reversible obturators, Low temperature carbon steel, as per SD PVV 102
NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24” and as per ANSI B 16.47 Serie ‘A’ for diameters 26” and above (4) Single-piece wedge for diameters up to 24” and Flexible wedge for diameters 26” and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) “Stock finish” facing (12) All materials shall comply with the NACE MR 01 75 Standard & with the specification GS PVV 622; Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Low Temperature Carbon Steel (LTCS) (12)
Service:
Low temperature hydrocarbons (wet H2S service) Low temperature flare gas (wet H2S service)
Rating:
300 Lbs RF
Corrosion allowance:
3 mm
D 23 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec. Fittings
Flanges (11)
2
3
4
6
Pressure (bars)
51
51
46.3
43.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
80
10
12
14
16
40
18 XS
20
24 40
26
36
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A350 LF2
WN, 300 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2 Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Cryogenic Temperature 3.5 % Ni Steel Non corrosive hydrocarbons (cryogenic temperature) Non corrosive flare gas (cryogenic temperature)
Rating:
300 Lbs RF
Corrosion allowance:
1.27 mm
D 31 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
160
Ends
PE
1½
Mat.Spec.
2
3
4
6
40
Pressure (bars)
51.7
51.7
51.5
48.7
Temperature (°C)
- 101
+ 37
+ 100
+ 200
8
10
12
14
16
20
18
Flanges (11)
22
24
30
26
36
To be calculated
BE ASTM A 333 Gr 3 seamless
Fittings
20
A 333 Gr 3 - SAW - 100 % radiography
3000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF3
A420 WPL-3 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A350 LF3
WN, 300 Lbs RF, A350 LF3 as per pipe schedule, blind flanges (3) WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF3 Stellite coated OS&Y, BB (4)
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF3, 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF3 or A352 LC3 Body, A350 LF3 ENP ball, PTFE seal (8), TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF3, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF3 PTFE seals (6) Wrench operated
A352 LC3 Body, F316 Trim, Flanged OS&Y, BB (9) A352 LC3, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above
Butterfly valves Check valves
800 Lbs SW, LF3, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF3 Y type, stainless steel strainer
Tee type filters, A420 WPL-3 steel as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A320 L7, Hh nuts A194 Gr 4 Reversible obturators 3.5 % Nickel steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Stock finish" facing
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Alloy steel 1.25CR 0.5 Mo
Rating:
300 Lbs RF
Service:
LP steam superheated
Corrosion allowance:
1.27 mm
D 42 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec.
Fittings
3
4
6
51.7
51.7
51.4
Temperature (°C)
- 29
+ 37
+ 100 + 200 + 300 + 405
8
40
10 30
12
14
16
Std
18
40
20 30
48.0
42.8
36.2
24 40
36 To be calculated
BE ASTM A335 Gr P11 seamless
A691 1.25Cr – SAW 100 % radiography
3000 Lbs, SW, A182 Gr F11 CL.2 45° or 90° elbows (2) couplings, tees, sockolets
A234 WP11 CL. 1 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A182 Gr F11 CL. 2
WN, 300 Lbs RF, A182 Gr F11 CL. 2, as per pipe schedule, blind flanges (3)
Flanges (9) Gate valves
2
Pressure (bars) (6)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting 800 Lbs SW, OS&Y A182 Gr F11 CL 2 Stellite coated, BB (4)
A217 WC6 Body, Trim stellite coated, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4)
Ball valves Globe valves
A217 WC6 Body, 800Lbs SW, OS&Y Stellite coated, A182 Gr F11 CL 2 Flanged OS&Y, BB (3) Stellite coated BB (5) (5)
Plug valves Butterfly valves Check valves Filters
800 Lbs SW, BC A182 Gr F11 CL. 2 Stellite coated (7) (8)
A217 WC6 Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Swing type, Flanged, BC (3)
600 Class, SW, A182 F 11 CL. 2 Y type, stainless steel strainer
Gaskets
Spiral wound , CAF filler , 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A193 B16, Hh nuts A194 Gr 4 Reversible obturators, A387 Gr 11 CL. 2
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Horizontal piston lift
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Smooth finish facing
(4) Single-piece wedge for diameters up to 2" and Flexible wedge for diameters 3" and above (5) Swivel plug disc (6) Full vacuum @ 48°C
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Stainless steel TP 304L
Rating:
300 Lbs RF
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
D 46 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends Mat.Spec. Fittings
Flanges (11) Gate valves (14) Ball valves (14) Globe valves (14) Plug valves (14)
½
¾
1
1½
80 S
2
3
4
10 S
Filters
8
41.3
41.3
34.4
28.8
Temperature (°C)
- 196
+ 37
+ 100
+ 200
10
12
14
16
40 S
18
20
Std
PE
24 XS
26
46
Larger sizes according to table below
BE
A312 TP 304L Seamless, or welded (SAW) per ASTM A358 Gr 304L class 1 (100 % radiography) 3000 Lbs, A182 F304L SW, 45° or 90° A403 WP 304L as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) elbows concentric/excentric reducers, stub-in, tees, weldolets (1) couplings, tees, unions, sockolets 300 Lbs RF, SW WN, 300 Lbs RF, A182 F 304L, as per pipe schedule, blind flanges (3) A182 F 304L WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting 800 Lbs SW A351 CF8M Body and Trim material, Trim stellite coated, OS&Y, BB, A182 F 304L, 316 Trim Gearbox for diameter 10" and above, Flanged (3) (4) (13) OS&Y, BB (4) (12) 800 Lbs A182 F 304L A351 CF8M Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, 316 Trim, PTFE seals Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, (12) Floating ball SW Gearbox for diameters 8" and above, Flanged (3) (10) (13) (8) (10) 800 Lbs SW A351 CF 8M Body, A182 F 304L, 316 316 Trim, OS&Y, Trim OS&Y, BB (5) BB, Flanged (9) (13) (9) (12) 800 Lbs SW A351 CF 8M, Body, 316 Trim, PTFE seals (6), A182 F 304L, PTFE Flanged wrench operated for diameters up to 6", seals (6) Wrench gearbox for diameters 8" and above (13) operated (12)
Butterfly valves (14) Check valves
6
Pressure (bars)
A351 CF 8M Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13) 800 Lbs SW, BC A182 F 304L (5)(7)(12) Horizontal piston lift 600 Class, SW, A182 F 304L Y type, stainless steel strainer
Gaskets Bolting
A351 CF 8M Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
Tee type filters, TP 304L Stainless steel, as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Miscellaneous
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 304 as per SD PVV 102 Flow element: SS TP 316
NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(9) Swivel plug disc
(2) Bending not permitted
(10) Firesafe and Anti-static
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(11) "Stock finish" facing
(4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F 304 is an acceptable alternate for body materials (14) Extended spindle 26 14.2 mm
28
30 30
32
34 40
36
38
40
42
44
46
20.6 mm
20.6 mm
22.2 mm
23.8 mm
23.8 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
300 Lbs RF
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
D 47 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec. Fittings
1½
2
3
4
6
8
10 S
Pressure (bars)
49.6
49.6
44.0
38.1
Temperature (°C)
- 140
+ 37
+ 100
+ 200
10
40 S
12
14
16
18
20
24
7.9 mm
8.7 mm
9.5 mm
10.3 mm
12.7 mm
26
To be calculated
BE
A312 TP 321 Seamless Ø less than 20”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs, A182 F321 SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A182 F321
WN, 300 Lbs RF, A182 F321, as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves (14)
800 Lbs SW, A182 F321 316 Trim OS&Y, BB (4) (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4) (13)
Ball valves (14)
800 Lbs A182 F321 (12) 316 Trim, PTFE seals Floating ball SW (8) (10)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10) (13)
Globe valves (14)
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves (14)
800 Lbs SW A182 F321 PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C, Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 6", Gearbox for diameters 8" and above (13)
Butterfly valves (14)
A351 CF 8C Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13) 800 Lbs SW, BC A182 F321 (5)(7)(12) Horizontal piston lift
Check valves
Filters
A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA
Miscellaneous
Reversible obturators, A240 TP 321 as per SD PVV 102 Flow element: SS TP 316
NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Stock finish" facing (12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F321or F347 is an acceptable alternate for body materials (14) Extended spindle
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
300 Lbs RF
Service:
Corrosive hydrocarbons (H2S + CO2) (heavy corrosion)
Corrosion allowance:
0 mm
Pressure (bars) Temperature (°C)
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
07/01
Rev.:
00
49.6
49.6
44.0
38.1
- 46
+ 37
+ 100
+ 200
(see note 14)
Diameter
Date:
Pressure / Temperature limits
Seal oil (after filter)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Lube oil (after filter)
D 48
1½
2
3
4
6
8
10 S
10
40 S
12
14
16
18
20
24 26
7.9 mm
8.7 mm
9.5 mm
10.3 mm
12.7 mm
To be calculated
BE
A312 TP 321 Seamless Ø less than 20”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs, A182 F321 SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
300 Lbs RF, SW A182 F321
WN, 300 Lbs RF, A182 F321, as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 300 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 10" and above, Flanged (3) (4) (13)
Ball valves
800 Lbs A182 F321 (12) 316 Trim, PTFE seals Floating ball SW (8) (10)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8) TPE or SPB, Floating ball for diameters up to 4" and Trunnion mounted for diameters 6" and above, Gearbox for diameters 8" and above, Flanged (3) (10) (13)
Globe valves
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves
800 Lbs SW A182 F321 PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 6", gearbox for diameters 8" and above (13) A351 CF 8C Body and Trim material, Trim stellite coated, Gearbox for diameter 8" and above, Flanged (3) (13)
Butterfly valves Check valves Filters
36
800 Lbs SW, BC A182 F321 (5) (7) (12) Horizontal piston lift
A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F321, Y type, stainless steel strainer
Gaskets Bolting Miscellaneous
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102 Flow element: SS TP 316
NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc (10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Stock finish" facing
(5) Removable seat
(12) Valves bodies may be SS TP 316L
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(13) Forged steel to ASTM A182 F321 or F347 is an acceptable alternate for body materials (14) Acceptable between -46°C and -140°C for blow down situation only (no valve operated below -46°C).
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
300 Lbs RF
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Demulsifier
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Anti-foam
D 50 Date:
07/01
Rev.:
00
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec.
Pressure (bars)
41.3
41.3
34.4
28.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
1½
SB 677 UNS N08904 Seamless
Fittings
3000 Lbs, A182 F316L 45° or 90° elbows couplings, tees, SW
Flanges
300 Lbs RF, SW A182 F316L (2)
Gate valves Ball valves
800 Lbs A182 F316L 316 Trim, PTFE seals Floating ball, SW (5)
Globe valves Plug valves Needle valves
800 Lbs, A182 F316L, 316 Trim, BB, SW
Check valves
800 Lbs, A182 F316L, BC, SW (3) (4) Horizontal piston lift
Filters
600 Class, Tee type, A182 F316L, SW
Gaskets
CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "Stock finish" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
600 Lbs RF (Smooth finish)
Service:
Hydrocarbons (non corrosive)
Corrosion allowance:
1.27 mm
Low pressure hydraulic systems
½
¾
1
Schedule Ends
1½
Flanges (11)
2
3
80
4
6
40
8
80
10
12
14
Rev.:
00
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
16
60
PE
Mat.Spec.
Fittings
07/01
102.0
Temperature (°C)
Diameter
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Methanol, glycol
F 01
18 20
24
26
80
To be calculated
BE API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters Gaskets
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) “Smooth finish" facing
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
600 Lbs RF (Smooth finish)
Service:
Lean amine
Corrosion allowance:
1.27 mm
F 01 N Date:
07/01
Rev.:
00
Pressure (bars)
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule Ends
1½
Flanges (11)
3
80
4
6
40
8
80
10
12
14
16
60
PE
Mat.Spec. Fittings
2
18
20
24
26
80
To be calculated
BE API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
36
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Smooth finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm
F 03 Date:
07/01
Rev.:
00
Pressure (bars)
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
Temperature (°C)
Diameter
½
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
¾
1
1½
2
3
4
6
8
10
160
Ends
12
14
18
20
24
Flanges (11)
46
BE API 5L X60 - SAW 100 % radiography
API 5 L Gr B seamless or SAW 100 % radiography
Fittings
26
Larger sizes according to table below
80
PE
Mat.Spec.
16
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (12)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) (13) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending R = 5 dia. to be used wherever possible
(9) Swivel plug disc
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(12) For diameters 26 inches and above, fittings according to MSS SP 75 class WPHY60, wall thickness to suit matching pipe
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(11) "Smooth finish" facing
(13) For diameters 26 inches and above, flanges per ASTM A694 grade F60, to match pipe wall thickness. 26
28
30
32
34
36
38
40
42
44
46
24.0 mm
25.6 mm
27.2 mm
28.8 mm
30.4 mm
32.0 mm
33.6 mm
35.2 mm
36.8 mm
38.4 mm
40.0 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
600 Lbs RF (Smooth finish)
Service:
Rich amine
Corrosion allowance:
3 mm
F 03 N Date:
07/01
Rev.:
00
Pressure (bars)
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends
½
¾
1
1½
Flanges (11)
3
4
6
8
160
10
12
14
16
18
20
24
26
80
PE
Mat.Spec. Fittings
2
To be calculated BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
36
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Smooth finish" facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
3 mm
F 03 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Ends
½
¾
1
1½
Flanges (11)
3
4
6
8
160
10
12
14
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
16
18
20
24
26
80
PE
Mat.Spec.
Fittings
2
102.0
To be calculated BE
API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20 Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (CO2 medium corrosion)
Corrosion allowance:
5 mm (12)
F 05 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec. Fittings
Flanges (11)
2
3 160
4
6 120
8
10
12
14
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
16
18
20
100
24
26
30 32
36
80
26.2 mm
29.4 mm
34.2 mm
31.0 mm
BE API 5 L Gr B seamless or SAW 100 % radiography
API 5L X60 - SAW 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (13)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) (14) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) Corrosion allowance limited to 3.1 mm only for fittings below 2 inches (13) For diameters 26 inches and above, fittings according to MSS SP 75 class WPHY60, wall thickness to suit matching pipe (14) For diameters 26 inches and above, flanges per ASTM A694 grade F60, to match pipe wall thickness
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
5 mm (13)
F 05 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
Mat.Spec.
Fittings
Flanges (11)
2
3 160
4
6
8
120
10
12
14
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
16
18
20
100
24
26
80
36 To be calculated
BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601 Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 3.1 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
6 mm (12)
F 06 Date:
07/01
Rev.:
00
Pressure (bars)
102.0
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
Temperature (°C)
Diameter Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Ends
½
¾
1
1½
XXS
Flanges (11)
3
4
6
160
8
10
12
14
120
16
18
20
24
26
100
PE
Mat.Spec.
Fittings
2
36
To be calculated
BE
API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets (12)
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Smooth finish" facing
(5) Removable seat
(12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3.1 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (13)
Rating:
600 Lbs RF
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
6 mm (12)
F 06 S
(Smooth finish)
Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends
½
¾
1
1½
XXS
Flanges (11)
3
4
6
160
8
10
12
14
120
102.0
92.7
87.8
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
100
PE
Mat.Spec. Fittings
2
102.0
36
To be calculated
BE
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets (12)
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A105
WN, 600 Lbs RF, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20 Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3.1 mm only for fittings below 2 inches (13) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
600 Lbs RJ
Service:
HP steam saturated
Corrosion allowance:
1.27 mm
HP condensate
F 12 Date:
07/01
Rev.:
00
Diameter
½
¾
1
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Ends
1½
2
80
Flanges (9) Gate valves
4
6
40
80
8
102.0
92.7
Temperature (°C)
+ 37
+ 100 + 200 + 300 + 330
10
12
- 29
14
16
60
PE
18
20
24
87.8
26
80
A 672 Gr B60 – SAW 100 % radiography
A 106 Gr B 3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RJ, SW A105
WN, 600 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 600 Lbs RJ, Orifice Support Assembly, supplied with bolting
800 Lbs SW, A105 Stellite coated OS&Y, BB (4)
800 Lbs SW, A105, Stellite coated OS&Y, BB (5) (8)
A216 WCB Body, Trim stellite coated OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
A216 WCB Body, Stellite coated, Flanged, OS&Y, BB (8) (3)
Plug valves Butterfly valves Check valves
Filters
800 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated, Swing type, Flanged, BC (3)
600 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint , Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 600 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(5) Removable seat
(2) Bending R = 5 dia. to be used wherever possible
(6) Full vacuum @ 48°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(7) Horizontal installation
(4) Single-piece wedge for diameters up to 2" and Flexible wedge for diameters 3" and above
(8) Swivel plug disc (9) Ring joint facing
74.7
46
To be calculated
Ball valves Globe valves
77.5
BE
Mat.Spec. Fittings
3
Pressure (bars) (6) 102.0
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) Non corrosive hydrocarbons (low temperature)
Rating:
600 Lbs RF (Smooth finish)
Corrosion allowance:
1.27 mm
F 21 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
1½
80
Ends
3
4
6
40
8
10
80
12
14
102.0
92.7
87.8
- 46
+ 37
+ 100
+ 200
16
60
18 20
24
26
46
Larger sizes according to table below
80
PE
Mat.Spec. Fittings
2
102.0
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
3000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A350 LF2
WN, 600 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) "Smooth finish" facing 26
28
30
32
34
36
38
40
42
44
46
28.6 mm
30.7 mm
32.8 mm
34.9 mm
37.0 mm
39.0 mm
41.1 mm
43.2 mm
45.3 mm
47.4 mm
49.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) Low temperature hydrocarbons (CO2 light corrosion)
Rating:
600 Lbs RF (Smooth finish)
Corrosion allowance:
3 mm
F 23 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule
¾
1
1½
3
4
6
8
10
12
160
Ends
14
102.0
92.7
87.8
- 46
+ 37
+ 100
+ 200
16
18 20
24
26
46
Larger sizes according to table below
80
PE
Mat.Spec. Fittings
2
102.0
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A350 LF2
WN, 600 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Smooth finish" facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
26
28
30
32
34
36
38
40
42
44
46
30.6 mm
32.7 mm
34.8 mm
36.8 mm
38.9 mm
41.0 mm
43.1 mm
45.2 mm
47.3 mm
49.4 mm
51.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) (12) Low temperature hydrocarbons (wet H2S service)
Rating:
600 Lbs RF (Smooth finish)
Corrosion allowance:
3 mm
F 23 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule
¾
1
1½
2
3
4
6
Pressure (bars)
102
102
92.7
87.8
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
160
Ends
12
14
18 20
80
26
46
BE ASTM A 333 Gr 6 seamless
Fittings
24
Larger sizes according to table below
PE
Mat.Spec.
16
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A350 LF2
WN, 600 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Gaskets
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(9) Swivel plug disc
(2) Bending not permitted
(10) Firesafe and Anti-static
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(11) "Smooth finish" facing
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 26
28
30
32
34
36
38
40
42
44
46
30.6 mm
32.7 mm
34.8 mm
36.8 mm
38.9 mm
41.0 mm
43.1 mm
45.2 mm
47.3 mm
49.4 mm
51.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) (13) Low temperature hydrocarbons (wet H2S service)
Rating:
600 Lbs RF (Smooth finish)
Corrosion allowance:
6 mm (12)
F 26 S Date:
07/01
Rev.:
00
Pressure (bars)
102.0
102.0
92.7
87.8
- 46
+ 37
+ 100
+ 200
Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule
¾
1
1½
XXS
Ends
3
4
6
160
8
10
12
14
120
PE
Mat.Spec. Fittings
2
16
18 20
24
100
26
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A350 LF2
WN, 600 Lbs RF, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges (11)
36
WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) "Smooth finish" facing
(5) Removable seat
(12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3.1 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
(13) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Cryogenic temperature 3.5 % Ni steel Non corrosive hydrocarbons (cryogenic temperature)
Rating:
600 Lbs RF
Corrosion allowance:
1.27 mm
F 31
(Smooth finish)
Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80
Ends
PE
1½
Mat.Spec.
Fittings
2
3
4
6
40
Pressure (bars)
103.4
103.4
103.0
97.4
Temperature (°C)
- 101
+ 37
+ 100
+ 200
8
80
10
12
14
60
16 80
18 20 60
24 80
26
To be calculated
BE ASTM A 333 Gr 3 seamless
A 333 Gr 3 - SAW - 100 % radiography
3000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF3
A420 WPL-3 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A350 LF3
WN, 600 Lbs RF, A350 LF3 as per pipe schedule, blind flanges (3)
Flanges (11)
36
WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, A350 LF3 Stellite coated OS&Y, BB (4)
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, A350 LF3 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF3 or A352 LC3 Body, A350 LF3 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
800 Lbs SW, A350 LF3 Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs SW, A350 LF3 PTFE seals (6) Wrench operated
A352 LC3 Body, F316 Trim, Flanged OS&Y, BB (9) A352 LC3, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above
Butterfly valves Check valves
Filters
800 Lbs SW, LF3, BC Stellite coated (5) (7) Horizontal piston lift
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
600 Class, SW, A350 LF3, Y type, stainless steel strainer
Tee type filters, A420 WPL-3 alloy steel as per SD PVV 103
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A320 L7, Hh nuts A194 Gr 4 Reversible obturators, 3.5 % Nickel steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Alloy steel 1.25 Cr 0.5 Mo
Rating:
600 Lbs RJ
Service:
HP steam superheated
Corrosion allowance:
1.27 mm
F 42 Date:
07/01
Rev.:
00
Diameter
½
¾
1
Schedule
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Ends
1½
80
Flanges (10) Gate valves
3
4
6
103.4
102.9
85.7
72.6
Temperature (°C)
+ 37
+ 100 + 200 + 300
+405
8
10
40
12
0
14
16
18
20
24
95.8
26
46
Larger sizes according to table below
80 BE
PE
Mat.Spec.
Fittings
2
Pressure (bars) (6) 103.4
A691 1.25 Cr - SAW - 100 % radiography
ASTM A 335 Gr P11 seamless 3000 Lbs SW, A182 Gr F11 CL. 2 45° or 90° elbows (2) couplings, tees sockolets,
A234 WP11 CL.1 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RJ, SW A182 Gr F11 CL. 2
WN, 600 Lbs RJ, A182 Gr F11 CL. 2 as per pipe schedule, blind flanges (3) WN, 600 Lbs RJ, Orifice Support Assembly, supplied with bolting
800 Lbs SW, OS&Y A182 Gr F11 CL. 2 Stellite coated, WB (4)
A217 WC6 Body, Trim stellite coated, Pressure seal, OS&Y Gearbox for diameter 8" and above, Flanged (3) (4)
Ball valves Globe valves
800 Lbs SW, OS&Y A182 Gr F11 CL. 2 Stellite coated, WB (9)
A217 WC6 Body, Stellite coated, Flanged OS&Y, WB (3) (5) (9)
Plug valves Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, WC A182 Gr F11 CL. 2 Stellite coated (8) (7)
A217 WC6 Body, Trim stellite coated, Swing type , Flanged, Pressure seal (3)
600 Lbs, SW, A182 Gr F11 CL. 2, Y type, stainless steel strainer Octogonal Ring Joint, 5 Cr 0.5 Mo, Maxi 130 HRB Studs A193 B16, Hh nuts A194 Gr 4 Reversible obturators, A387 Gr 11 CL. 2
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 SERIE ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 2" and Flexible wedge for diameters 3" and above (5) Pressure seal (6) Full vacuum @ 48°C
(7) (8) (9) (10)
Horizontal installation Horizontal piston lift Swivel plug disc Ring joint facing
26
28
30
32
34
36
38
40
42
44
46
29.0 mm
31.1 mm
33.2 mm
35.3 mm
37.4 mm
39.5 mm
41.6 mm
43.8 mm
45.9 mm
48.0 mm
50.1 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 304L
Rating:
600 Lbs RF (Smooth finish)
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
F 46 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings Flanges (11)
1½
2
3
10 S
4
6
40 S
Pressure (bars)
82.6
82.6
69.1
57.3
Temperature (°C)
- 196
+ 37
+ 100
+ 200
8
10
12
14
16
80 S
18 20
24
26
46
Larger sizes according to table below
60 BE
A312 TP 304L Seamless, or welded (SAW) per ASTM A358 Gr 304L class 1 (100 % radiography) 3000 Lbs A182 F304L SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 304L as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A182 F304L
WN, 600 Lbs RF, A182 F 304L as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves (14)
800 Lbs SW, A182 F304L, 316 Trim OS&Y, BB (4) (12)
A351 CF8M Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4) (13)
Ball valves (14)
800 Lbs A182 F 304L 316 Trim, PTFE seals (12) Floating ball SW (8) (10)
A351 CF8M Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) (13)
Globe valves (14)
800 Lbs SW, A182 F304L, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves (14)
800 Lbs SW, A182 F 304L PTFE seals (6) Wrench operated (12)
A351 CF8M Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF8M Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above (13)
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, BC, A182 F304L (5) (7) (12) Horizontal piston lift
A351 CF8M Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F304L Y type, stainless steel strainer
Tee type filters, TP 304L Stainless steel, as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20 Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 304 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F 304 is an acceptable alternate for body materials (14) Extended spindle 26
28
30
32
34
36
38
40
42
44
46
26.4 mm
28.4 mm
31.7 mm
32.5 mm
34.5 mm
36.5 mm
38.5 mm
40.6 mm
42.6 mm
44.6 mm
46.6 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
600 Lbs RF (Smooth finish)
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
F 47 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
Flanges (11)
1½
2 10 S
3
4
6
Pressure (bars)
99.2
99.2
88.1
76.6
Temperature (°C)
- 140
+ 37
+ 100
+ 200
8
40 S
10 80 S
12
14
16
18
20
24
14.2 mm
14.2 mm
16.6 mm
19.0 mm
20.6 mm
24.6 mm
26
46
Larger sizes according to table below
BE
A312 TP 321 Seamless Ø less than 8”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
600 Lbs RF, SW A182 F321
WN, 600 Lbs RF, A182 F321, as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves (14)
800 Lbs SW A182 F321, 316 Trim OS&Y, BB (4) (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4) (13)
Ball valves (14)
800 Lbs A182 F321 316 Trim, PTFE seals (12) Floating ball SW (8) (10)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) (13)
Globe valves (14)
800 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves (14)
800 Lbs SW, A182 F321, PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above (13)
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, BC, A182 F321 (5) (7) (12) Horizontal piston lift
A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
600 Class, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20 Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) "Smooth finish" facing (12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F321 or F 347 is an acceptable alternate for body materials (14) Extended spindle 26
28
30
32
34
36
38
40
42
44
46
26.9 mm
28.5 mm
31.7 mm
33.3 mm
34.9 mm
36.5 mm
38.8 mm
46.0 mm
46.0 mm
46.0 mm
52.3 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (H2S + CO2) (heavy corrosion)
Corrosion allowance:
0 mm
F 48 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
99.2
99.2
88.1
76.6
- 46 (see
+ 37
+ 100
+ 200
note 14)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule
Flanges (11) Gate valves
Ball valves
Globe valves
Plug valves
1
1½
80 S
Ends Mat.Spec. Fittings
¾
2 10 S
3
4
6
40 S
8
10 80 S
12
14
16
18
20
24 26
14.2 mm
14.2 mm
16.6 mm
19.0 mm
20.6 mm
24.6 mm
PE
46
Larger sizes according to table below
BE
A312 TP 321 Seamless Ø less than 8”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets 600 Lbs RF, SW A182 F321
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) WN, 600 Lbs RF, A182 F321 as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
800 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (12) 800 Lbs A182 F321 (12) 316 Trim, PTFE seals Floating ball SW (8) (10) 800 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9) (12) 800 Lbs SW, A182 F321, PTFE seals (6) Wrench operated (12)
A351 CF 8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 8" and above, Flanged (3) (4) (13)
A351 CF 8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) (13)
A351 CF 8C Body, 316 Trim, OS&Y, BB, Flanged (9) (13) A351 CF 8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 4", gearbox for diameters 6" and above (13)
Butterfly valves Check valves
Filters Gaskets Bolting
800 Lbs SW, BC, A182 F321 (5) (7) A351 CF 8C Body, Type 316 Trim material, Dual-Plate (Wafer type). (12) Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13) Horizontal piston lift 600 Class, SW, A182 F321, Tee type filters, TP 321 Stainless steel, as per SD PVV 103 Y type, stainless steel strainer Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20 Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(9) Swivel plug disc
(2) Bending not permitted
(10) Firesafe and Anti-static
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(11) "Smooth finish" facing
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(13) Forged steel to ASTM A182 F321 or F 347 is an acceptable alternate for body materials
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(12) Valves bodies may be SS TP 316L
(14) Acceptable between -46°C and -140°C for blow down situation only (no valve operated below -46°C) 26
28
30
32
34
36
38
40
42
44
46
26.9 mm
28.5 mm
31.7 mm
33.3 mm
34.9 mm
36.5 mm
38.8 mm
46.0 mm
46.0 mm
46.0 mm
52.3 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
600 Lbs RF
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Demulsifier
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Anti-foam
Date:
07/01
Rev.:
00
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec.
F 50
Pressure (bars)
82.7
82.7
69.1
57.3
Temperature (°C)
- 46
+ 37
+ 100
+ 200
1½
SB 677 UNS N08904 Seamless
Fittings
3000 Lbs, A182 F316L 45° or 90° elbows couplings, tees, SW
Flanges
600 Lbs RF, SW A182 F316L (2)
Gate valves Ball valves
800 Lbs A182 F316L 316 Trim, PTFE seals Floating ball , SW (5)
Globe valves Plug valves Needle valves
800 Lbs, A182 F316L, 316 Trim, BB, SW
Check valves
800 Lbs, A182 F316L, SW, BC (3) (4) Horizontal piston lift
Filters
600 Class, Tee type, A182 F316L, SW
Gaskets
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per API 601
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "Smooth finish" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Duplex UNS S31803
Rating:
600 Lbs RF (Smooth finish)
Service:
Corrosive hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
0 mm
F 70 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
1½
Mat.Spec.
2
3
4
6
10 S
8 40 S
10
12
103.4
103.4
98.3
85.3
- 46
+ 37
+ 100
+ 200
14
16
18
20
24
26
28 30
36
10.0 mm
11.4 mm
12.8 mm
14.3 mm
17.1 mm
18.5 mm
20.0 mm
25.6 mm
21.4 mm
BE ASTM A 790 UNS S31803 seamless or SAW - (100 % radiography)
Fittings
Flanges
3000 Lbs SW (2) A182 F51, couplings, tees, sockolets 45° or 90° elbows
ASTM A 815 – S31803, class WP – S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
600 Lbs RF, SW A182 F51 (3)
ASTM A182 F51 material , 190 HRB minimum hardness WN, 600 Lbs RF, Hub thickness as per pipe schedule, blind flanges (3) WN, 600 Lbs RF, Orifice Support Assembly, supplied with bolting
Gate valves
800 Lbs SW, OS&Y BB , Stellite coated A182 F51 (4)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" or 4" OS&Y, BB, Gearbox for diameter 4" and above, Flanged (3) (4)
Ball valves
800 Lbs SW, (8) (10) A182 F51 PTFE seals Floating ball
UNS S31803 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (3) (10)
Globe valves
800 Lbs A182 F51 SW, Stellite coated OS&Y, BB (5) (9)
Plug valves
800 Lbs A182 F51 SW, PTFE seals (6) Wrench operated
UNS S31803 Body and Trim, Flanged OS&Y, BB, (3) (9) UNS S31803, PTFE seals (6), Flanged (3), wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters
800 Lbs SW, BC, Stellite coated, A182 F51 (5) (7) (12)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
600 Lbs, SW, UNS S31803, body & strainer, Y type,
Gaskets
Tee type filters, UNS S31803, as per SD PVV 103
Spiral wound, CAF filler, 4 mm thick 316 SS winding, 3.2 mm thick external centering ring per ASME B 16.20
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, UNS S31803 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Smooth finish facing. Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) Welded wrought fittings must be 100 % radiographed after forming (12) Horizontal piston lift
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
900 Lbs RJ
Service:
Hydrocarbons (non corrosive)
Corrosion allowance:
1.27 mm
Production gas (HP sweet gas)
Temperature (°C)
Diameter
½
¾
1
Schedule Ends
1½
Flanges (11)
2
3
4
6
80
8
10
12
14
120
07/01
Rev.:
00
153.0
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
100
PE
To be calculated
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES
(2) Bending R = 5 dia. to be used wherever possible
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(7) Horizontal installation
(1) Connections to be calculated by ENGINEERING COMPANY
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
36
BE
Mat.Spec. Fittings
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Methanol, glycol
G 01
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
900 Lbs RJ
Service:
Hydrocarbons (wet H2S service)
Corrosion allowance:
1.27 mm
Production gas (wet H2S service)
G 01 S Date:
07/01
Rev:
00
Pressure (bars) Temperature (°C)
Diameter Schedule Ends
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
2
Flanges (11)
4
6
80
8
10
12
14
120
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
100
PE
API 5L Gr.B - SAW - 100 % radiography
API 5 L Gr B seamless
3000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters
1500 Lbs SW,A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per PS-TCS-102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R=5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
To be calculated
BE
Mat.Spec.
Fittings
3
153.0
(10) Firesafe and Anti-static (11) Ring joint facing (12) All materials shall comply with the NACE MR 01 75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm
Temperature (°C)
Diameter
½
¾
1
Schedule Ends
1½
Flanges (11)
3
4
6
8
160
10
12
14
07/01
Rev.:
00
153.0
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
120
PE
To be calculated
API 5 L Gr B seamless
API 5L Gr B - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets
36
BE
Mat.Spec. Fittings
2
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive production gas (HP gas, CO2 light corrosion)
G 03
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(7) Horizontal installation
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(8) PTFE seals temperature limit = 200°C
(5) Removable seat
(10) Firesafe and Anti-static
(9) Swivel plug disc (11) Ring joint facing
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service, SSCC only)
Corrosion allowance:
3 mm
½
¾
1
Schedule Ends
1½
Flanges (11)
3
4
6
8
10
160
12
Rev.:
00
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
14
16
18
20
24 26
46
Larger sizes according to table below
120
PE
BE
Mat.Spec. Fittings
2
07/01
153.0
Temperature (°C)
Diameter
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive production gas (wet H2S service, SSCC only)
G 03 N
API 5 L Gr B – SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs A105, 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" or 4" anf F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs, SW A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW A105, Stellite coated OS&Y, BB (5) (9)
A216 WCB Body, F6 Trim, Flanged OS&Y, BB, (9) (13)
Plug valves
1500 Lbs SW, A105, PTFE seals (6) Wrench operated
A216 WCB Body, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves Filters Gaskets Bolting
1500 Lbs SW A105 BC Horizontal piston lift Stellite coated (5) (7)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" for F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia.to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) All materials shall comply the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 (13)Gearbox for diameters 4" and above 26
28
30
32
34
36
38
40
42
44
46
43.5 mm
46.6 mm
49.7 mm
52.8 mm
55.9 mm
59.0 mm
62.1 mm
65.2 mm
68.2 mm
71.3 mm
74.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
3 mm
Corrosive production gas (wet H2S service)
G 03 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule Ends
1½
Flanges (11)
3
4
6
8
10
160
12
14
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
46
Larger sizes according to table below
120
PE
BE
Mat.Spec. Fittings
2
153.0
API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) (13) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24’’ and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Gearbox for diameters 4" and above 26
28
30
32
34
36
38
40
42
44
46
43.5 mm
46.6 mm
49.7 mm
52.8 mm
55.9 mm
59.0 mm
62.1 mm
65.2 mm
68.2 mm
71.3 mm
74.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (CO2 medium corrosion)
Corrosion allowance:
5 mm (12)
Temperature (°C)
Diameter Schedule Ends
½
¾
1
1½
2
XXS
Flanges (11)
4
6
8
160
10
12
14
140
PE
07/01
Rev.:
00
153.0
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
120
API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending R = 5 dia. to be used wherever possible (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
To be calculated
BE
Mat.Spec.
Fittings
3
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive production gas (HP gas, CO2 medium corrosion)
G 05
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) Corrosion allowance limited to 3.0 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
6 mm (12)
Temperature (°C)
Diameter
½
¾
1
Schedule Ends
1½
Flanges (11)
3
4
6
XXS
8
160
10
12
14
07/01
Rev.:
00
153.0
153.0
139.1
131.3
- 29
+ 37
+ 100
+ 200
16
140
PE
18
20
24 26
120
36
To be calculated
BE
Mat.Spec. Fittings
2
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive production gas (HP gas, CO2 heavy corrosion)
G 06
API 5L Gr B - SAW - 100 % radiography
API 5 L Gr B seamless 6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
A234 WPB as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A105
WN, 900 Lbs RJ, A105 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending R = 5 dia. to be used wherever possible
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) Ring joint facing
(5) Removable seat
(12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low Temperature Carbon Steel (LTCS) Non corrosive hydrocarbons (low temperature)
Rating:
900 Lbs RJ
Corrosion allowance:
1.27 mm
G 21 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule Ends Mat.Spec. Fittings Flanges (11)
1½
2
80
3
4
6
Pressure (bars)
153
153
139.1
131.3
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
12
14
120
16
18
20
24 26
100
PE
46
Larger sizes according to table below
BE A671 CC65 Cl22 W/S2 at - 50°F
ASTM A 333 Gr 6 seamless 3000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 900 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A350 LF2, 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F 316 Trim, Flanged OS&Y, BB (9) (12) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2 HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) Gearbox for diameters 4" and above 26
28
30
32
34
36
38
40
42
44
46
41.6 mm
44.7 mm
47.8 mm
50.9 mm
53.9 mm
57.0 mm
60.1 mm
63.2 mm
66.3 mm
69.4 mm
72.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low Temperature Carbon Steel (LTCS) Low temperature hydrocarbons (CO2 light corrosion)
Rating:
900 Lbs RJ
Corrosion allowance:
3 mm
G 23 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
1½
2
3
4
6
Pressure (bars)
153
153
139.1
131.3
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
12
160
Ends Mat.Spec.
14
16
18
46
Larger sizes according to table below
BE ASTM A 333 Gr 6 seamless
Flanges (11)
24 26
120
PE
Fittings
20
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 900 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) Ring joint facing 26
28
30
32
34
36
38
40
42
44
46
43.5 mm
46.6 mm
49.7 mm
52.8 mm
55.9 mm
59.0 mm
62.1 mm
65.2 mm
68.2 mm
71.3 mm
74.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low Temperature Carbon Steel (LTCS) (12) Low temperature hydrocarbons (wet H2S service, SSCC only)
Rating:
900 Lbs RJ
Corrosion allowance:
3 mm
G 23 N Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Diameter Schedule Ends Mat.Spec. Fittings Flanges (11)
½
¾
1
1½
2
3
4
6
Pressure (bars)
153
153
139.1
131.3
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
160
10
12
14
16
18
20
24 26
120
PE
36
To be calculated BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 900 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) (13) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 (13) Gearbox for diameters 4" and above
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low Temperature Carbon Steel (LTCS) (12) Low temperature hydrocarbons (wet H2S service)
Rating:
900 Lbs RJ
Corrosion allowance:
3 mm
G 23 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule Ends Mat.Spec. Fittings Flanges (11) Gate valves
Ball valves
Globe valves
Plug valves
1½
2
3
4
6
8
10
160
12
14
153.0
153.0
139.1
131.3
- 46
+ 37
+ 100
+ 200
16
20
24 26
46
Larger sizes according to table below
120
PE
BE ASTM A 333 Gr 6 seamless
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2 1500 Lbs RJ, SW A350 LF2
18
A671 CC65 Cl22 W/S2 at - 50°F
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
WN, 900 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4) 1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10) 1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9) 1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) (13) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, LF2, A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and BC above, Dual-Plate (Wafer type). Stellite coated (5) (7) Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3) Horizontal piston lift 1500 Lbs SW, A350 LF2, Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103 Y type, stainless steel strainer Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Gearbox for diameters 4” and above 26
28
30
32
34
36
38
40
42
44
46
43.5 mm
46.6 mm
49.7 mm
52.8 mm
55.9 mm
59.0 mm
62.1 mm
65.2 mm
68.2 mm
71.3 mm
74.4 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low Temperature Carbon Steel (LTCS) Low temperature hydrocarbons (CO2 light corrosion)
Rating:
900 Lbs RJ
Corrosion allowance:
5 mm (12)
G 25 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends Mat.Spec. Fittings
Flanges (11)
½
¾
1
1½
2
XXS
3
4
6
160
8
10
12
14
153.0
153.0
139.1
131.3
- 46
+ 37
+ 100
+ 200
16
140
PE
18
20
22 24
26
120
36
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 900 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9 Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing (12) Corrosion allowance limited to 3.0 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Cryogenic Temperature 3.5 % Ni Steel Non corrosive hydrocarbons (cryogenic temperature)
Rating:
900 Lbs RJ
Corrosion allowance:
1.27 mm
G 31 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule
3
4
6
80
Ends
155.1
155.1
154.6
146.2
Temperature (°C)
- 101
+ 37
+ 100
+ 200
8
10
12
14
120
16
18
20
100
PE
24 26
ASTM A 333 Gr 3 seamless
To be calculated
A 333 Gr 3 - SAW - 100 % radiography
3000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF3
A420 WPL-3 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF3
WN, 900 Lbs RJ, A350 LF3 as per pipe schedule, blind flanges (3)
Flanges (11)
36
BE
Mat.Spec.
Fittings
2
Pressure (bars)
WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF3 Stellite coated OS&Y, BB (4)
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4)
Ball valves
1500 Lbs SW A350 LF3 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF3 or A352 LC3 Body, A350 LF3 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10)
Globe valves
1500 Lbs SW, A350 LF3 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF3 PTFE seals (6) Wrench operated
A352 LC3 Body, F316 Trim, Flanged OS&Y, BB (9) A352 LC3, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above
Butterfly valves Check valves
1500 Lbs SW, LF3, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7 (3)
1500 Lbs SW, A350 LF3, Y type, stainless steel strainer
Tee type filters, A420 WPL-3 alloy steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 900 Lbs rating
Bolting
Studs A320 L7, Hh nuts A194 Gr 4 Reversible obturators, 3.5 % Nickel steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above
(9) Swivel plug disc
(4) Flexible wedge
(11) Ring joint facing
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
900 Lbs RJ
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
G 47 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule Ends Mat.Spec. Fittings Flanges (11) Gate valves (14)
2
3
4
6
80 S
PE
Pressure (bars)
148.9
148.9
132.1
114.8
Temperature (°C)
- 140
+ 37
+ 100
+ 200
8
10
12
14
16
18
20
24 26
14.2 mm
18.2 mm
20.6 mm
22.2 mm
25.4 mm
28.5 mm
30.1 mm
36.5 mm
To be calculated
BE
A312 TP 321 Seamless Ø less than 6”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A182 F321
WN, 900 Lbs RJ, A182 F321 as per pipe schedule, blind flanges, RJ contact facing (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
1500 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4) (12)
A351 CF8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4) (13)
Ball valves (14)
1500 Lbs A182 F321 316 Trim, PTFE seals (12) Floating ball SW (8) (10)
Globe valves (14)
1500 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
A351 CF8C Body, 316 Trim, OS&Y, BB, Flanged (9)
Plug valves (14)
1500 Lbs SW A182 F321, PTFE seals (6) Wrench operated (12)
A351 CF 8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above (13)
A351 CF8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) (13)
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, BC, A182 F321 (5) (7) (12) Horizontal piston lift
A351 CF8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC ) is acceptable if density is above 0.7 (3) (13)
1500 Lbs, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 900 Lbs rating Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing, minimum hardness 150 HRB (12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F321 or F 347 is an acceptable alternate for body materials (14) Extended spindle
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
900 Lbs RJ
Service:
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
Corrosion allowance:
0 mm
G 48 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
148.9
148.9
132.1
114.8
- 46 (see
+ 37
+ 100
+ 200
note 14)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule Ends Mat.Spec. Fittings Flanges (11) Gate valves
2
3
4
6
80 S
PE
8
10
12
14
16
18
20
24 26
14.2 mm
18.2 mm
20.6 mm
22.2 mm
25.4 mm
28.5 mm
30.1 mm
36.5 mm
36
To be calculated
BE
A312 TP 321 Seamless Ø less than 6”, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A182 F321
WN, 900 Lbs RJ, A182 F321 as per pipe schedule, blind flanges, RJ contact facing (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
1500 Lbs SW A182 F321 316 Trim OS&Y, BB (4) (12)
Ball valves
1500 Lbs A182 F321(12) 316Trim, PTFE seals, SW Floating ball (8) (10)
Globe valves
1500 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9) (12)
Plug valves
1500 Lbs SW A182 F321 PTFE seals (6) Wrench operated (12)
A351 CF8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 6" and above, Flanged (3) (4) (13)
A351 CF8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 6" and above, Flanged (3) (10) (13) A351 CF8C Body, 316 Trim, OS&Y, BB, Flanged (9) A351 CF8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 3", gearbox for diameters 4" and above (13)
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, BC, A182 F321 (5) (7) (12) Horizontal piston lift
A351 CF8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (3) (13)
1500 Lbs, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 900 Lbs rating Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26" and above (4) Single-piece wedge dor diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Ring joint facing, minimum hardness 150 HRB (12) Valves bodies may be SS TP 316L (13) Forged steel to ASTM A182 F321 or F347 is an acceptable alternate for body materials (14) Acceptable between - 46°C and - 40°C for blow down situation only (no valve operated below - 46°C)
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
900 Lbs RJ
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Demulsifier
Temperature (°C)
Diameter
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec.
Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Anti-foam
G 50
124.1
124.1
103.4
86.1
- 46
+ 37
+ 100
+ 200
1½
SB 677 UNS N08904 Seamless
Fittings
3000 Lbs, A182 F316L 45° or 90° elbows couplings, tees, SW
Flanges
1500 Lbs RJ, SW A182 F316L (2)
Gate valves Ball valves
1500 Lbs A182 F316L 316 Trim, PTFE seals Floating ball, SW (5)
Globe valves Plug valves Needle valves
1500 Lbs, A182 F316L, 316 Trim, BB, SW
Check valves
1500 Lbs, A182 F316L, BC, SW (3) (4) Horizontal piston lift
Filters
900 Class, Tee type, A182 F316L, SW
Gaskets
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 1500 Lbs rating
Bolting
Studs A193 B8 M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "RTJ" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Duplex UNS S31803
Rating:
900 Lbs RJ
Service:
Hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
0 mm
G 70 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
1½
Mat.Spec. Fittings
Flanges
2 10 S
3
4
6 40 S
8
Pressure (bars)
135
135
135
Temperature (°C)
- 46
+ 37
+ 160
10
12
80 S
14
16
18
20
24 26
14.3 mm
15.9 mm
17.4 mm
19.0 mm
23.8 mm
To be calculated
BE ASTM A 790 UNS S31803 seamless or SAW - 100 % radiography
3000 Lbs SW, (2) A182 F51, couplings, tees, sockolets, 45° or 90° elbows
ASTM A 815-S31803, class WP - S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A182 F51 (3)
ASTM A182 F 51 material, 190 HRB minimum hardness WN, 900 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 900 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, OS&Y, BB, Stellite coated A182 F51 (4)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", OS&Y, BB, Gearbox for diameter 6" and above, Flanged (4)
Ball valves
1500 Lbs SW, (8) (10) A182 F51, PTFE seals Floating ball
UNS S31803 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs A182 F51, SW, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs A182 F51, SW, PTFE seals (6) Wrench operated
UNS S31803 Body and Trim, Flanged, OS&Y BB (9) UNS S31803, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 4" and above
Butterfly valves Check valves Filters
1500 Lbs SW, BC, Stellite coated, A182 F51 (5) (7) (12)
UNS S31803 Body & trim, Trim stellite coated for diameters 2” to 4’’, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, UNS S31803 body & strainer, Y type
Tee type filters, UNS S31803, as per SD PVV 103
Gaskets
Octogonal Ring Joint, SS TP 316L, per ANSI B 16.20, 900 Lbs rating, 135 HRB maximum hardness
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, UNS S31803 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing, Flanges as per ANSI B 16.5 for diameters up to 24" and as per ANSI B 16.47 Serie ‘A’ for diameters 26” and above (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
36
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Welded wrought fittings must be 100 % radiographed after forming (12) Horizontal piston lift
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Carbon steel
Rating:
1500 Lbs RJ
Service:
Hydrocarbons (non corrosive) Production gas (HP sweet gas) Injection water (de-aerated seawater, non-corrosive) M.P. hydraulic systems Methanol, glycol
Corrosion allowance:
1.27 mm
½
¾
1
Schedule
1½ 160
Ends
3
4
6
120
160
8
10
12
14
07/01
Rev.:
00
255.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
140
PE API 5 L X60 seamless
To be calculated
API 5L X60 - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC, Stellite coated (5) (7) Horizontal piston lift
Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES
(2) Bending not permitted
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B16.5
(7) Horizontal installation
(1) Connections to be calculated by ENGINEERING COMPANY
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
36
BE
Mat.Spec. Fittings
2
Date:
255.4
Temperature (°C)
Diameter
H 01
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS Material:
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All fittings per MSS SP 75, class WPHY60
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
1500 Lbs RJ
Service:
Corrosive hyrocarbons (wet H2S service)
Corrosion allowance:
1.27 mm
Corrrosive production gas (wet H2S service)
H 01 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
1½ 160
Ends
3
4
6
120
160
8
10
12
14
255.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
140
PE API 5 L X60 seamless
To be calculated
API 5L X60 - SAW - 100 % radiography
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
36
BE
Mat.Spec. Fittings
2
255.4
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A694 grade F60. All flanges diameters 24" and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the Specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm (12)
Corrosive production gas (HP, CO2 light corrosion)
H 03 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends
PE
1½
2
3
4
6
160
8
10
XXS
140
12
14 160
255.4
255.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
18
140
160
API 5 L X60 seamless
Flanges
24 26
140
36
To be calculated
BE
Mat.Spec. Fittings
20
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(12) Corrosion allowance limited to 2.6 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Carbon steel (12)
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service, SSCC only)
Corrosion allowance:
3 mm (14)
Corrosive production gas (wet H2S seervice, SSCC only)
Temperature (°C)
Diameter
½
Schedule Ends Mat.Spec.
¾
1
1½
XXS
2
3
4
6
160
8
10
XXS
140
12
14 160
PE
Date:
07/01
Rev.:
00
255.4
255.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
18
140
160
20
24 26
140
To be calculated
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) (13) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending not permitted
(9) Swivel plug disc
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B 16.5
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
36
BE API 5 L X60 seamless
Fittings
H 03 N
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS Material:
(11) All fittings per MSS SP 75, class WPHY60
(13) Gearbox for diameters 3" and above (14) Corrosion allowance limited to 2.6 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
3 mm (13)
Corrosive production gas (wet H2S service)
H 03 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec.
¾
1
1½
2
XXS
3
4
6
160
8
10
XXS
140
12
14 160
PE
255.4
255.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
18
140
160
24 26
140
To be calculated
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(8) PTFE seals temperature limit = 200°C
(2) Bending not permitted
(9) Swivel plug disc
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B16.5
(10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve material shall also conform to the specification GS PVV 613
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
36
BE API 5 L X60 seamless
Fittings
20
(11) All fittings per MSS SP 75, class WPHY60
(13) Corrosion allowance limited to 2.6 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (CO2 medium corrosion)
Corrosion allowance:
5 mm (12)
½
Schedule Ends Mat.Spec. Fittings
¾
1
1½
2
3
4
XXS
07/01
Rev.:
00
232.4
232.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
Temperature (°C)
Diameter
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosive production gas (HP, CO2 medium corrosion)
H 05
6
8
160
XXS
10
12
14
16
160
PE
18
20
24 26
To be calculated
140
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
36
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B16.5
(9) Swivel plug disc (10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(12) Corrosion allowance limited to 2.8 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
5 mm (13)
Corrosive production gas (HP, wet H2S service)
H 05 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec.
¾
1
1½
2
3
4
XXS
6
8
160
XXS
10
12
14
232.4
232.4
231.9
219.1
- 29
+ 37
+ 100
+ 200
16
160
PE
Flanges
20
24 26
140
To be calculated
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged, OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
36
BE API 5 L X60 seamless
Fittings
18
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Class, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve material shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 2.8 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material: Service:
Carbon steel
Corrosive hydrocarbons (CO2 heavy corrosion) Corrosive production gas (HP, CO2 heavy corrosion)
Rating:
1500 Lbs RJ
Corrosion allowance:
6 mm (12)
H 06 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec.
¾
1
1½
2
3
4
XXS
6
8
160
Pressure (bars)
154
154
154
154
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
24 26
100
36
To be calculated
BE API 5 L X60 seamless
Flanges
20
120
PE
Fittings
18
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B 16.5 (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All fittings per MSS SP 75, class WPHY60 (12) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3.1 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (wet H2S service)
Corrosion allowance:
6 mm (13)
Corrosive production gas (HP, wet H2S service)
H 06 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule
3
4
6
XXS
Ends
242
242
231.9
219.1
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10
12
14
24.2
PE
16
18
20
160
24 26 140
API 5 L X60 seamless
To be calculated
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
1500 Lbs RJ, SW A105
WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A105, 316 Trim, PTFE seals Floating ball (8) (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
36
BE
Mat.Spec. Fittings
2
Pressure (bars)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 24" and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) All fittings per MSS SP 75, class WPHY60 (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 5 mm only for pipe sizes below 3 inches and to 2.7 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) Non corrosive hydrocarbons (low temperature)
Rating:
1500 Lbs RJ
Corrosion allowance:
1.27 mm
H 21 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule Ends
Flanges
3
4
6
8 23.1
160
mm
PE
10 160
255.4
231.9
219.1
- 46
+ 37
+ 100
+ 200
12
14
16
18
20
24 26
33.4
36.5
41.5
46.5
51.6
61.6
mm
mm
mm
mm
mm
mm
36 To be calculated
BE
Mat.Spec. Fittings
2
255.4
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) (11) Non corrosive hydrocarbons (low temperature) (wet H2S service)
Rating:
1500 Lbs RJ
Corrosion allowance:
1.27 mm
H 21 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule Ends Mat.Spec. Fittings
Flanges
2
3
4
6
160
8
10
23.1 mm
160
PE
255.4
255.4
231.9
219.1
- 46
+ 37
+ 100
+ 200
12
14
16
18
20
24 26
33.4
36.5
41.5
46.5
51.6
61.6
mm
mm
mm
mm
mm
mm
36 T o be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) Corrosive hydrocarbons (CO2 light corrosion) (low temperature)
Rating:
1500 Lbs RJ
Corrosion allowance:
3 mm (11)
H 23 Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Diameter
½
Schedule Ends Mat.Spec.
XXS
Fittings
Flanges
¾
1
1½
2
3
4
6
Pressure (bars)
190
190
190
190
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
160
10
12
14
16
18
20
24 26
140
PE
36 To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF2, 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF2, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Corrosion allowance limited to 2.7 mm only for 1/2 inch fittings
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Service:
CLASS
Low temperature
Material:
Carbon Steel (LTCS) (11) Corrosive hydrocarbons (low temperature) (wet H2S service)
Rating:
1500 Lbs RJ
Corrosion allowance:
3 mm (12)
H 23 S Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Diameter
½
Schedule Ends Mat.Spec.
XXS
Fittings
¾
1
1½
2
3
4
6
Pressure (bars)
190
190
190
190
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
12
14
160
16
18
20
24 26
140
PE
36 To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (12) Corrosion allowance limited to 2.7 mm only for 1/2 inch fittings
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) (11) Corrosive hydrocarbons (low temperature) (wet H2S service, SSCC only)
Rating:
1500 Lbs RJ
Corrosion allowance:
3 mm (12)
H 23 N Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
1½
Schedule Ends Mat.Spec. Fittings
Flanges
2
3
4
6
XXS
255.4
255.4
232.2
220.9
- 46
+ 37
+ 100
+ 200
8
10
12
14
16
18
20
24 26
25.4 mm
31.8 mm
35.4 mm
38.5 mm
43.5 mm
48.5 mm
53.5 mm
63.6 mm
PE
36 To be calculated
BE
ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) (13) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 (12) Corrosion allowance limited to 2.0 mm only for fittings below 2 inches (13) Geabox for diameters 3" and above
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature
Rating:
1500 Lbs RJ
Corrosion allowance:
5 mm (11)
Carbon Steel (LTCS) Corrosive hydrocarbons (CO2 medium corrosion) (low temperature)
H 25 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends Mat.Spec. Fittings
Flanges
½
¾
1
1½
2
XXS
3
4
6
Pressure (bars)
164
164
164
164
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
160
10
12
14
16
140
PE
18
20
24 26 120
36
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7
1500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24’’ (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Corrosion allowance limited to 2.9 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature
Rating:
1500 Lbs RJ
Corrosion allowance:
6 mm (11)
Carbon Steel (LTCS) Corrosive hydrocarbons (CO2 heavy corrosion) (low temperature)
H 26 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec.
¾
1
1½
2
3
4
XXS
6
Pressure (bars)
154
154
154
154
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
160
10
12
14
16
140
PE
Flanges
20
24 26
120
36
To be calculated
BE ASTM A 333 Gr 6 seamless
Fittings
18
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
Plug valves
1500 Lbs SW, A350 LF2 A352 LCC Body, F316 Trim, Flanged Stellite coated OS&Y, BB (5) (9) OS&Y, BB (9) 1500 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24"
(7) Horizontal installation
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(8) PTFE seals temperature limit = 200°C
(5) Removable seat
(10) Firesafe and Anti-static
(9) Swivel plug disc (11) Corrosion allowance limited to 5 mm only for nominal pipe sizes below 1 inch and to 3 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature
Rating:
1500 Lbs RJ
Corrosion allowance:
6 mm (12)
Carbon Steel (LTCS) (11) Corrosive hydrocarbons (low temperature) (wet H2S service)
H 26 S Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits Pressure (bars)
242
242
231.9
219.1
Temperature (°C)
- 46
+ 70.6
+ 100
+ 200
Diameter
½
¾
1
1½
2
3
4
6
8
10
12
14
16
18
20
24 26
Schedule
8.9 mm
9.4 mm
10.0 mm
11.4 mm
12.6 mm
XXS
17.6 mm
22.7 mm
27.4 mm
32.5 mm
37.3 mm
40.2 mm
45.0 mm
49.7 mm
54.5 mm
64.1 mm
Ends Mat.Spec.
PE
Flanges
To be calculated
BE ASTM A 333 Gr 6 seamless
Fittings
36
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF2
WN, 1500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, A350 LF2 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves Plug valves
1500 Lbs SW, A350 LF2 A352 LCC Body, F316 Trim, Flanged Stellite coated OS&Y, BB (5) (9) OS&Y, BB (9) 1500 Lbs SW, A350 LF2 PTFE seals (6) Wrench operated
A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
1500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Class, SW, A350 LF2, Y type, stainless steel strainer
Gaskets Bolting
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel, as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
(12) Corrosion allowance limited to 2.2 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Cryogenic Temperature
Rating:
1500 Lbs RJ
Corrosion allowance:
1.27 mm
3.5 % Ni Steel Non corrosive hydrocarbons (cryogenic temperature)
H 31 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends
¾
1
1½
3
4
6
160
258.5
258.5
257.6
243.9
Temperature (°C)
- 101
+ 37
+ 100
+ 200
8
10
12
14
XXS
PE
Mat.Spec.
Fittings
2
Pressure (bars)
16
18
20
160
24 26
36 To be calculated
BE
ASTM A 333 Gr 3 seamless
A 333 Gr 3 - SAW - 100 % radiography
6000 Lbs SW 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF3
A420 WPL 3 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A350 LF3
WN, 1500 Lbs RJ, A350 LF3 as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW A350 LF3 Stellite coated OS&Y, BB (4)
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW A350 LF3 316 Trim, PTFE seals Floating ball (8) (10)
A350 LF3 or A352 LC3 Body, A350 LF3 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW A350 LF3 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW A350 LF3 PTFE seals (6) Wrench operated
A352 LC3 Body, F316 Trim, Flanged OS&Y, BB (9) A352 LC3, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters
1500 Lbs SW, LF3, BC Stellite coated (5) (7) Horizontal piston lift
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, A350 LF3, Y type, stainless steel strainer
Tee type filters, A420 WPL-3 steel, as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 1500 Lbs rating
Bolting
Studs A 320 L7, Hh nuts A194 Gr 4 Reversible obturators, 3.5 Nickel steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24"
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(4) Flexible wedge
(8) PTFE seals temperature limit = 200°C
(5) Removable seat
(9) Swivel plug disc (10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Stainless steel TP 321
Rating:
1500 Lbs RJ
Service:
Cryogenic temperature hydrocarbons
Corrosion allowance:
0 mm
H 47 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
Mat.Spec. Fittings
Flanges
1½
Pressure (bars)
248.1
248.1
220.5
191.4
Temperature (°C)
- 140
+ 37
+ 100
+ 200
2
3
4
6
8
10
12
14
16
18
20
24 26
6.3 mm
11.1 mm
11.1 mm
18.6 mm
22.2 mm
28.5 mm
31.7 mm
35.7 mm
40.4 mm
45.2 mm
50.0 mm
59.5 mm
To be calculated
BE
A312 TP 321 Seamless φ less than 4", or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs, A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A182 F321
WN, 1500 Lbs RJ, A182 F321 as per pipe schedule, blind flanges, (3) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves (12)
1500 Lbs SW A182 F321 316 Trim OS&Y, BB (4)
A351 CF8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4) (11)
Ball valves (12)
1500 Lbs A182 F321 316 Trim, PTFE seal Floating ball SW (8) (10)
A351 CF8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10) (11)
Globe valves (12)
1500 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9)
Plug valves (12)
1500 Lbs SW, A182 F321, PTFE seals (6) Wrench operated
A351 CF8C Body, 316 Trim, OS&Y, BB, Flanged (9) A351 CF8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above (11)
Butterfly valves Check valves
Filters Gaskets Bolting
1500 Lbs SW, BC, A182 F321 (5) (7) Horizontal piston lift
A351 CF8C Body, Type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (11)
1500 Lbs, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel as per SD PVV 103
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 1500 Lbs rating Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing, minimum hardness 150 HRB Flanges as per ANSI B 16.5 for diameters up to 24" (4) Flexible wedge (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Forged steel to ASTM A 182 F321 or F347 is an acceptable alternate for body materials (12) Extended spindle
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
1500 Lbs RJ
Service:
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
Corrosion allowance:
0 mm
Schedule
1
1½
80 S
Ends
00
220.5
191.4
- 46
+ 37
+ 100
+ 200
2
3
4
6
8
10
12
14
16
18
20
6.3 mm
11.1 mm
11.1 mm
18.6 mm
22.2 mm
28.5 mm
31.7 mm
35.7 mm
40.4 mm
45.2 mm
50.0 mm
PE
24 26 59.5 mm
36
To be calulated
BE
A312 TP 321 Seamless φ less than 4", or welded (SAW) per ASTM A 358 Gr 321 class 1 (100 % radiography)
Mat.Spec. Fittings
¾
Rev.:
248.1
(see note 12)
½
07/01
248.1
Temperature (°C)
Diameter
Date:
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosion inhibitor
H 48
3000 Lbs A182 F321, SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
1500 Lbs RJ, SW A182 F321
WN, 1500 Lbs RJ, A182 F321 as per pipe schedule, blind flanges, (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
Ball valves
Globe valves
1500 Lbs SW, A182 F321, 316 Trim OS&Y, BB (4)
A351 CF8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4) (11)
1500 Lbs A182 F321 316 Trim, PTFE seals Floating ball SW (8) (10)
A351 CF8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10) (11)
1500 Lbs SW A182 F321, 316 Trim OS&Y, BB (5) (9) 1500 Lbs SW, A182 F321, PTFE seals (6) Wrench operated
Plug valves
A351 CF8C Body, 316 Trim, OS&Y, BB, Flanged (9) A351 CF8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above (11)
Butterfly valves 1500 Lbs SW, BC, A182 F321 (5) (7) Horizontal piston lift
Check valves
Filters
A351 CF8C Body, Type 316 Trim material, Dual-Plate (Wafer type); Swing type (flanged, BC) is acceptable if density is above 0.7 (11)
1500 Lbs, SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Gaskets
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 1500 Lbs rating
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing, minimum hardness 150 HRB Flanges as per ANSI B 16.5 for diameters up to 24"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) Forged steel to ASTM A 182 F321 or F347 is an acceptable alternate for body materials
(5) Removable seat
(12) Acceptable between -46°C and -140°C for blow down situation only (no valve operated below -46°C)
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
1500 Lbs RJ
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Anti-foam
Temperature (°C)
Diameter
Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Demulsifier
H 50
½
Schedule Ends Mat.Spec.
¾
1
206.8
206.8
172.2
143.5
- 46
+ 37
+ 100
+ 200
1½
80 S
PE SB 677 UNS N08904 Seamless
Fittings
3000 Lbs, A182 F316L 45° or 90° elbows couplings, tees, SW
Flanges
1500 Lbs RJ, SW A182 F316L (2)
Gate valves Ball valves
1500 Lbs A182 F316L 316 Trim, PTFE seals Floating ball, SW (5)
Globe valves Plug valves Neddle valves
1500 Lbs, A182 F316L 316 Trim, BB, SW
Check valves
1500 Lbs, A182 F316L, BC, SW (3) (4) Horizontal piston lift
Filters
1500 Class, Tee type, A182 F316L, SW
Gaskets
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 1500 Lbs rating
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "RTJ" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Duplex UNS S31803
Rating:
1500 Lbs RJ
Service:
Hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
0 mm
H 70 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends
PE
1½
Mat.Spec. Fittings
2
3
4
40 S
6 80 S
Pressure (bars)
225
225
225
Temperature (°C)
- 46
+ 37
+ 135
8
10
12
14
16
18
20
24 26
13.4 mm
16.8 mm
19.9 mm
21.8 mm
24.9 mm
28.0 mm
31.1 37.4 mm mm
To be calculated
BE ASTM A 790 UNS S31803 seamless or SAW - 100 % radiography
3000 Lbs SW, (2) A182 F51, couplings, tees, sockolets, 45° or 90° elbows
ASTM A 815-S31803, class WP - S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in tees, weldolets (1) (11)
1500 Lbs RJ, SW A182 F51 (3)
ASTM A182 F51 material, 190 HRB minimum hardness WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, OS&Y, BB, Stellite coated A182 F51 (4)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, (8) (10) A182 F51, PTFE seals Floating ball
UNS S31803 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs A182 F51, SW, Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs A182 F51, SW, PTFE seals (6) Wrench operated
UNS S31803 Body and Trim, Flanged, OS&Y BB (9) UNS S31803, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters
1500 Lbs SW, BC, Stellite coated, A182 F51 (5) (7) (12)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, UNS S31803 body & strainer, Y type
Tee type filters, UNS S31803, as per SD PVV 103
Gaskets
Octogonal Ring Joint, SS TP 316L, per ANSI B 16.20, 1500 Lbs rating, 135 HRB maximum hardness
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, UNS S31803 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing, Flanges as per ANSI B 16.5 for diameters up to 24"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) Welded wrought fittings must be 100 % radiographed after forming (12) Horizontal piston lift
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Inconel 625
Rating:
1500 Lbs RJ
Service:
Hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
Corrosion allowance:
0 mm
Production gas (gas + liquid + salt water)
Temperature (°C)
Diameter
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
1½
2 10 S
Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
(14)
H 73
3
4
6
40 S
8 80 S
10
226.5
226.5
226.5
- 46
+ 37
+ 103
12
14
16
18
20
24 26
15 mm
17 mm
19 mm
21 mm
24 mm
28 mm
36 To be calculated
BE ASTM B 444 UNS No 6625 Gr 1 seamless or SAW - 100 % radiography (11)
3000 Lbs SW, Inconel 625, couplings, tees, 45° or 90° elbows sockolets (2) (11) (13)
ASTM B 366 Gr WPNCMC, S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11) (12)
1500 Lbs RJ, SW (3) B 564 UNS No 6625
ASTM B 564 UNS No 6625 material, 230 HRB minimum hardness WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) (11)
Flanges
WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (4)
Inconel 625 Body & trim, Trim stellite coated for diameters 2” to 4”, OS&Y, BB, Gearbox for diameter 4” and above, Flanged (4)
Ball valves
1500 Lbs SW, Inconel 625 PTFE seals Floating ball (8) (10)
Inconel 625 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (5) (9)
Plug valves
1500 Lbs SW, Inconel 625 PTFE seals (6) Wrench operated
Inconel 625 Body and Trim, Flanged, OS&Y BB (9) Inconel 625, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters
1500 Lbs SW, 625, BC Stellite coated (5) (7) Horizontal piston lift
Inconel 625 Body & trim, Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, Inconel 625 body & strainer, Y type
Gaskets
Tee type filters, Inconel 625, as per SD PVV 103
Octogonal Ring Joint, Inconel 625, per ANSI B 16.20, 1500 Lbs rating, 210 HRB maximum hardness
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Inconel 625 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) Allowable stress 40 ksi (UTS = 120 ksi & YS = 60 ksi)
(5) Removable seat
(12) Welded wrought fittings WX must be 100 % radiographed after forming
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static
(13) Forged fittings per ASTM B 564 UNS No 6625 (14) NACE MR 01-75 is fully applicable
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Inconel 625
Rating:
1500 Lbs RJ
Service:
Hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
Corrosion allowance:
0 mm
Production gas (gas + liquid + salt water)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
(14)
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
Flanges
1½
2
3
H 74 Date:
07/01
Rev.:
00
Pressure / Temperature limits
4
6
10 S
8 40 S
Pressure (bars)
154
154
154
Temperature (°C)
- 29
+ 37
+ 103
10
12
14
16
18
20
24 26
80 S
12 mm
13 mm
15 mm
16 mm
20 mm
36 To be calculated
BE ASTM B 444 UNS No 6625 Gr 1 seamless or SAW - 100 % radiography (11)
3000 Lbs SW, Inconel 625, couplings, tees, 45° or 90° elbows sockolets (2) (11) (13)
ASTM B 366 Gr WPNCMC, S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11) (12)
1500 Lbs RJ, SW (3) B 564 UNS No 6625
ASTM B 564 UNS No 6625 material, 230 HRB minimum hardness WN, 1500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) (11) WN, 1500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
1500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (4)
Inconel 625 Body & trim (16), Trim stellite coated for diameters 2" to 4’’, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
1500 Lbs SW, Inconel 625 PTFE seals (8) Floating ball (10) (15)
Inconel 625 Body & trim (16), PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
1500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (5) (9)
Inconel 625 Body and Trim, Flanged, OS&Y BB (9)
Plug valves
1500 Lbs SW, Inconel 625 PTFE seals (6) Wrench operated
Inconel 625 body & trim (16), PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters Gaskets Bolting
1500 Lbs SW, 625 BC Stellite coated (5) (7) Horizontal piston lift
Inconel 625 Body & trim (16), Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type); Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
1500 Lbs SW, Inconel 625 body & strainer, Y type
Tee type filters, Inconel 625, as per SD PVV 103
Octogonal Ring Joint, Inconel 625, per ANSI B 16.20, 1500 Lbs rating, 210 HRB maximum hardness Studs A193 B7, Hh nuts A194 2H Reversible obturators, Inconel 625 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 24" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Allowable stress 40 ksi (UTS = 120 ksi & YS = 60 ksi) (12) Welded wrought fittings WX must be 100 % radiographed after forming (13) Forged fittings per ASTM B 564 UNS No 6625 (14) NACE MR 01-75 is fully applicable (15) Fitted with pipe nipples L = 100 mm Sch 80 S (16) For sizes 4" and above, acceptable alternate: Carbon steel + Inconel 625 weld overlay
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (non corrosive)
Corrosion allowance:
1.27 mm (12)
Production gas (HP, non corrosive)
Pressure (bars)
Methanol, glycol
Temperature (°C)
½
Schedule Ends Mat.Spec. Fittings
¾
1
1½
160
2
3
4
6
Date:
07/01
Rev.:
00
Pressure / Temperature limits
H.P. hydraulic systems
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Injection water (de-aerated seawater, non-corrosive)
J 01
8
10
12
14
XXS
425.3
425.3
386.5
365.0
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
To be calculated
PE
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
36
WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters
A216 WCB Body, Trim stellite coated for diameters 2" to 4 and F6 for diameters 6" and above, Dual-Plate (Wafer type); Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 12" and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) Corrosion allowance limited to 0.8 mm only for 1 ½ inch fittings
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (wet H2S service)
Corrosion allowance:
1.27 mm (13)
Production gas (HP, wet H2S service)
J 01 S Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule
¾
1
1½
160
Ends
3
4
6
8
10
12
14
XXS
425.3
386.5
365.0
- 29
+ 37
+ 100
+ 200
16
18
20
24 26
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
36
To be calculated
PE
Mat.Spec. Fittings
2
425.3
WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets Bolting
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 12” and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 0.8 mm only for 1”1/2 inch fittings
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm (12)
Production gas (HP, CO2 light corrosion)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Injection water (light corrosion)
½
Schedule Ends Mat.Spec. Fittings
¾
1
1½
J 03 Date:
07/01
Rev.:
00
Pressure / Temperature limits
2
3
4
6
8
Pressure (bars)
301
301
301
301
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
XXS
18
20
24 26
To be calculated
PE
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets
36
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 12" and below shall conform to ANSI B 16.5
(9) Swivel plug disc (10) Firesafe and Anti-static
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(12) Corrosion allowance limited to 2.3 mm only for fittings below 2 inches
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (wet H2S service, light corrosion)
Corrosion allowance:
3 mm (13)
Production gas (wet H2S service, light corrosion)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Injection water (wet H2S service, light corrosion)
Schedule Ends Mat.Spec. Fittings
Flanges
½
¾
1
1½
2
3
4
J 03 S Date:
07/01
Rev.:
00
Pressure / Temperature limits
6
8
Pressure (bars)
301
301
301
301
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
XXS
16
18
20
24 26
To be calculated
PE
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
36
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Material ASTM A 694 grade F60. All flanges of diameters 12" and below shall conform to ANSI B 16.5 (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All fittings per MSS SP 75, class WPHY60 (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 2.3 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
6 mm (12)
Production gas (HP, CO2 heavy corrosion)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Injection water (heavy corrosion)
½
¾
1
1½
2
3
Schedule
9.15 mm
9.73 mm
10.5 mm
12.1 mm
13.4 mm
16.5 mm
Fittings
Flanges
Date:
07/01
Rev.:
00
Pressure / Temperature limits
Diameter
Ends Mat.Spec.
J 06
4
6
19.2 25.0 mm mm
Pressure (bars)
351
351
351
351
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10
12
14
16
18
20
24 26
30.5 mm
36.3 mm
41.8 mm
45.2 mm
50.6 mm
56.1 mm
58.6 mm
69.0 mm
PE
36 To be calculated
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters Gaskets Bolting
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 12" and below shall conform to ANSI B 16.5 (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All fittings per MSS SP 75, class WPHY60 (12) Corrosion allowance limited to 1.7 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Carbon steel (12)
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (wet H2S service, heavy corrosion)
Corrosion allowance:
6 mm (13)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Production gas (HP, wet H2S service, heavy corrosion)
J 06 S Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
351
351
351
351
Temperature (°C)
- 29
+ 37
+ 100
+ 200
Diameter
½
¾
1
1½
2
3
4
6
8
10
12
14
16
18
20
24 26
Schedule
9.15 mm
9.73 mm
10.5 mm
12.1 mm
13.4 mm
16.5 mm
19.2 mm
25.0 mm
30.5 mm
36.3 mm
41.8 mm
45.2 mm
50.6 mm
56.1 mm
58.6 mm
69.0 mm
Ends Mat.Spec.
PE
Flanges
To be calculated
BE API 5L X60 seamless
Fittings
36
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11)
2500 Lbs RJ, SW A105
WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, A105 Stellite coated OS&Y, BB (4)
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, A105, (8) 316 Trim, PTFE seals trunnion mounted (10)
A105 or A216 WCB Body, A105 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW, A105, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, A105 PTFE seals (6) Wrench operated
A216 WCB Body, F6 Trim, Flanged OS&Y, BB (9) A216 WCB, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
2500 Lbs SW, A105, BC Stellite coated (5) (7) Horizontal piston lift
Filters Gaskets
A216 WCB Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A105, Y type, stainless steel strainer
Tee type filters, carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing. Material ASTM A 694 grade F60. All flanges diameters 12" and below shall conform to ANSI B 16.5
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above
(11) All fittings per MSS SP 75, class WPHY60
(5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (13) Corrosion allowance limited to 1.7 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) Corrosive hydrocarbons (CO2 heavy corrosion) (low temperature)
Rating:
2500 Lbs RJ
Corrosion allowance:
6 mm (11)
J 26 Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Diameter
½
¾
1
1½
2
3
Schedule
9.66 mm
10.4 mm
11.3 mm
13.3 mm
14.8 mm
18.6 mm
Ends Mat.Spec. Fittings
Flanges
4
6
22.0 29.1 mm mm
Pressure (bars)
350
350
350
350
Temperature (°C)
- 46
+ 37
+ 100
+ 200
8
10
12
14
35.8 mm
42.9 mm
49.5 mm
53.7 mm
PE
16
18
60.4 67.1 mm mm
20
24 26
73.8 mm
87.2 mm
36
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
2500 Lbs RJ, SW A350 LF2
WN, 2500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves Ball valves
2500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4"’ and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
2500 Lbs SW A350 LF2 316 Trim, PTFE seals Trunnion mounted (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters Gaskets Bolting
2500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 12" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Corrosion allowance limited to 0.6 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material: Service:
CLASS
Low temperature Carbon Steel (LTCS) (11) Corrosive hydrocarbons (low temperature) (wet H2S service)
Rating:
2500 Lbs RJ
Corrosion allowance:
6 mm (12)
J 26 S Date:
07/01
Rev.:
00
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits Pressure (bars)
350
350
350
350
Temperature (°C)
- 46
+ 37
+ 100
+ 200
Diameter
½
¾
1
1½
2
3
4
6
8
10
12
14
16
18
20
24 26
Schedule
9.66 mm
10.4 mm
11.3 mm
13.3 mm
14.8 mm
18.6 mm
22.0 mm
29.1 mm
35.8 mm
42.9 mm
49.5 mm
53.7 mm
60.4 mm
67.1 mm
73.8 mm
87.2 mm
Ends Mat.Spec. Fittings
Flanges
PE
36
To be calculated
BE ASTM A 333 Gr 6 seamless
A671 CC65 Cl22 W/S2 at - 50°F
6000 Lbs SW, 45° or 90° elbows (2) couplings, tees, sockolets, A350 LF2
A420 WPL-6 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
2500 Lbs RJ, SW A350 LF2
WN, 2500 Lbs RJ, A350 LF2 as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves Ball valves
2500 Lbs SW, A350 LF2 Stellite coated OS&Y, BB (4)
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
2500 Lbs SW A350 LF2 316 Trim, PTFE seals Trunnion mounted (8)
A350 LF2 or A352 LCC Body, A350 LF2 ENP ball, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs SW A350 LF2 Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW A350 LF2 PTFE seals (6) Wrench operated
A352 LCC Body, F316 Trim, Flanged OS&Y, BB (9) A352 LCC, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters Gaskets Bolting
2500 Lbs SW, LF2, BC Stellite coated (5) (7) Horizontal piston lift
A352 LCC Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs, SW, A350 LF2, Y type, stainless steel strainer
Tee type filters, A420 WPL-6 carbon steel as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per ANSI B 16.20 - 90 HRB max, 2500 Lbs rating Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Low temperature carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Flanges as per ANSI B 16.5 for diameters up to 12" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613 (12) Corrosion allowance limited to 0.6 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel TP 321
Rating:
2500 Lbs RJ
Service:
Corrosive hydrocarbons (H2S + CO2 heavy corrosion)
Corrosion allowance:
0 mm
Temperature (°C)
Diameter Schedule Ends Mat.Spec. Fittings
Flanges
½
¾
80 S
Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Corrosion inhibitor
J 48
382
382
345.7
286.3
- 46 (see note 13)
+ 37
+ 100
+ 200
1
1½
2
3
4
6
8
10
12
14
16
18
20
4.76 mm
6.88 mm
8.59 mm
14.9 mm
19.2 mm
28.2 mm
36.7 mm
45.8 mm
54.3 mm
59.6 mm
68.1 mm
76.5 mm
85.1 mm
PE
24
36 To be calculated
BE
A312 TP 321 Seamless, or welded (SAW) per ASTM A358 Gr 321 class 1 (100 % radiography) 3000 Lbs A182 F321 SW, 45° or 90° elbows couplings, tees, unions, sockolets
A403 WP 321 as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1)
2500 Lbs RJ, SW A182 F321
WN, 2500 Lbs RJ, A182 F321, as per pipe schedule, blind flanges (3) WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves Ball valves
2500 Lbs SW A182 F321 316 Trim OS&Y, BB (4) (11)
A351 CF8C Body and Trim material, Trim stellite coated, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4) (12)
2500 Lbs A182 F321 (11) 316 Trim, PTFE seals (8) Trunnion mounted SW
A351 CF8C Body, Type 316 Trim material, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (12) (10)
Globe valves
2500 Lbs SW, A182 F321, 316 Trim OS&Y, BB (5) (9) (11)
Plug valves
2500 Lbs SW, A182 F321, PTFE seals (6) Wrench operated (11)
A351 CF8C Body, 316 Trim, OS&Y, BB, Flanged (9) (12) A351 CF8C Body, 316 Trim, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above (12)
Butterfly valves Check valves
Filters Gaskets Bolting
2500 Lbs SW, BC (11) A182 F321 (5) (7) Horizontal piston lift
A351 CF8C Body, type 316 Trim material, Dual-Plate (Wafer type). Swing type (flanged, BC) is acceptable if density is above 0.7 (12)
2500 Lbs SW, A182 F321, Y type, stainless steel strainer
Tee type filters, TP 321 Stainless steel, as per SD PVV 103
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 2500 Lbs rating Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Ring joint facing. Minimum hardness 150 HRB Flanges as per ANSI B 16.5 for diameters up to 12" (4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) (8) (9) (10) (11) (12)
Horizontal installation PTFE seals temperature limit = 200°C Swivel plug disc Firesafe and Anti-static Valves bodies may be SS TP 316L Forged steel to ASTM A182 F321 is an acceptable alternate for body materials (13) Acceptable between -46°C and -140°C for blow down situation only (no valve operated below -46°C)
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Stainless steel 904L/316L
Rating:
2500 Lbs RJ
Service:
Corrosion inhibitor
Corrosion allowance:
0 mm
Demulsifier
Temperature (°C)
Diameter Schedule Ends Mat.Spec.
Date:
07/01
Rev.:
00
Pressure / Temperature limits Pressure (bars)
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Anti-foam
J 50
½
¾
1
1½
80 S
4.1 mm
5.1 mm
7.4 mm
344.7
344.7
287.3
239.0
- 46
+ 37
+ 100
+ 200
PE SB 677 UNS N08904 Seamless
Fittings
6000 Lbs, A182 F316L 45° or 90° elbows couplings, tees, SW
Flanges
2500 Lbs RJ, SW A182 F316L (2)
Gate valves Ball valves
2500 Lbs A182 F316L Trunnion mounted PTFE seals, SW (5)
Globe valves Plug valves Needle valves
2500 Lbs, A182 F316L, 316 Trim, BB, SW
Check valves
2500 Lbs, A182 F316L, SW, BC (3) (4) Horizontal piston lift
Filters
2500 Class, Tee type, A182 F316L, SW
Gaskets
Octogonal Ring Joint, TP 316L SS, per ANSI B 16.20 - 135 HRB max, 2500 Lbs rating
Bolting
Studs A193 B8M class 2, Hh nuts A194 Gr 8MA Reversible obturators, A240 TP 321 as per SD PVV 102
Miscellaneous NOTES (1) Bending not permitted
(4) Horizontal installation
(2) Per ANSI B 16.5, "RTJ" facing
(5) PTFE seals temperature limit = 200°C
(3) Removable seat
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
CLASS Material:
Duplex UNS S31803
Rating:
2500 Lbs RJ
Service:
Hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
0 mm
J 70 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
1½
Pressure (bars)
380
380
380
Temperature (°C)
- 46
+ 37
+ 150
2
3
4
6
8
6.4 mm
15.2 mm
13.5 mm
18.3 mm
22.2 mm
10
12
14
16
18
20
24 26
To be calculated BE
ASTM A 790 UNS S31803 seamless or SAW - 100 % radiography 3000 Lbs SW, (2) A182 F51, couplings, tees, sockolets, 45° or 90° elbows
ASTM A 815-S31803, class WP - S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in tees, weldolets (1) (11)
2500 Lbs RJ, SW A182 F51 (3)
ASTM A182 F51 material, 190 HRB minimum hardness WN, 2500 Lbs RJ, Hub thickness as per pipe schedule, blind flanges (3)
Flanges
WN, 2500 Lbs RJ, Orifice Support Assembly, supplied with bolting
Gate valves
2500 Lbs SW, OS&Y, BB Stellite coated A182 F51 (4)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
2500 Lbs SW, (8) (10) A182 F51, PTFE seals Trunnion mounted
UNS S31803 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
2500 Lbs A182 F51, SW, Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs A182 F51, SW, PTFE seals (6) Wrench operated
UNS S31803 Body and Trim, Flanged, OS&Y BB (9) UNS S31803, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves Filters
2500 Lbs SW, BC, Stellite coated, A182 F51 (5) (7) (12)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
2500 Lbs SW, UNS S31803 body & strainer, Y type
Tee type filters, UNS S31803, as per SD PVV 103
Gaskets
Octogonal Ring Joint, SS TP 316L, per ANSI B 16.20, 2500 Lbs rating, 135 HRB maximum hardness
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, UNS S31803 as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) PTFE seals temperature limit = 200°C
(3) Ring joint facing, Flanges as per ANSI B 16.5 for diameters up to 12"
(9) Swivel plug disc
(4) Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(10) Firesafe and Anti-static (11) Welded wrought fittings must be 100 % radiographed after forming (12) Horizontal piston lift
36
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Inconel 625
Rating:
2500 Lbs Hub Connector
Service:
Hydrocarbons (H2S + CO2 + Chlorides: heavy corrosion)
Corrosion allowance:
0 mm
Production gas (gas + liquid + salt water)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
(14)
½
¾
1
Schedule
80 S
Ends Mat.Spec.
PE
Fittings
Flanges
1½
2
3 40 S
CLASS
J 73 Date:
07/01
Rev.:
00
Pressure / Temperature limits
4
6 80 S
Pressure (bars)
301
301
301
301
Temperature (°C)
- 29
+ 37
+ 100
+ 200
8
10
12
14
16
18
20
24 26
14 mm
17 mm
20 mm
22 mm
25 mm
28 mm
31 mm
37 mm
36
To be calculated
BE ASTM B 444 UNS No 6625 Gr 1 seamless or SAW - 100 % radiography (11)
3000 Lbs SW, Inconel 625, couplings, tees, 45° or 90° elbows sockolets (2) (11) (13)
ASTM B 366 Gr WPNCMC, S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11) (12)
Hub connector material per ASTM B 564 UNS No 6625, Clamp material per AISI 4130 (clamp to be PTFE or Polyethylen coated, Hub thickness as per pipe schedule) (3) (11)
Gate valves
2500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (4)
Inconel 625 Body & trim (16), Trim stellite coated, OS&Y, BB, Gearbox for diameter 4" and above (3) (4)
Ball valves
2500 Lbs SW, Inconel 625 PTFE seals (8) (15) Trunnion mounted (10)
Inconel 625 Body & trim (16), PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above (3) (10)
Globe valves
2500 Lbs SW, Inconel 625 Stellite coated OS&Y, BB (5) (9)
Plug valves
2500 Lbs SW, Inconel 625, PTFE seals (6) Wrench operated
Inconel 625 Body and Trim, (3) OS&Y, BB (9) Inconel 625 body & trim (16), PTFE seals (6), wrench operated for diameters up to 2", gearbox for diameters 3" and above (3)
Butterfly valves Check valves Filters Gaskets Bolting
2500 Lbs SW, 625, BC Stellite coated (5) (7) Horizontal piston lift
Inconel 625 Body & trim (16), Trim stellite coated for diameters 2" to 4", Dual-Plate (3); Swing type (BC or pressure seal) is acceptable if density is above 0.7 (3)
2500 Lbs SW, Inconel 625 body & strainer, Y type
Tee type filters, Inconel 625, as per SD PVV 103
per Manufacturer recommendation for Hub Connectors, Inconel 625 grade 2 Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Inconel 625 as per SD PVV 102
Miscellaneous NOTES (1) (2) (3) (4) (5) (6) (7) (8)
Connections to be calculated by ENGINEERING COMPANY Bending not permitted Hub connectors Single-piece wedge for diameters up to 24" and Flexible wedge for diameters 26" and above Removable seat Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C Horizontal installation PTFE seals temperature limit = 200°C
(9) Swivel plug disc (10) Firesafe and Anti-static (11) Allowable stress 40 ksi (UTS = 120 ksi & YS = 60 ksi) (12) Welded wrought fittings WX must be 100 % radiographed after forming (13) Forged fittings per ASTM B 564 UNS No 6625 (14) NACE MR 01-75 is fully applicable (15) Fitted with pipe nipples L = 100 mm Sch 80 S (16) For sizes 4" and above, acceptable alternate: ASTM A105 + Inconel weld overlay
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Carbon steel
Rating:
5000 Lbs RJ API 6A
Service:
Hydrocarbons (non corrosive)
Corrosion allowance:
1.27 mm
Production gas (HP, non corrosive)
K 01 Date:
07/01
Rev.:
00
Pressure / Temperature limits
H.P. hydraulic systems
Pressure (bars)
345
345
345
345
Methanol, glycol
Temperature (°C)
- 29
+ 37
+ 100
+ 200
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Injection water (de-aerated seawater, non corrosive)
CLASS
½
Schedule Ends Mat.Spec. Fittings
Flanges
¾
1
1½
2
3
4
160
6
8
10
12
14
16
XXS
18
20
24 26
36
To be calculated
PE
BE API 5 L X60 seamless
API 5L X60 SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (10)
5000 Lbs RJ, SW (3) API 6A type 6BX (11)
WN, 5000 Lbs RJ, API 6A type 6BX, Hub thickness as per pipe schedule, blind flanges (3) (11) WN, 5000 Lbs RJ, Orifice Support Assembly, supplied with bolting (3) (11)
Gate valves
5000 Lbs SW, Stellite coated OS&Y, BB (4) (11)
API 6A grade 60K Body, trim stellite coated OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
5000 Lbs SW (9) 316 Trim, PTFE seals trunnion mounted (11)
API 6A grade 60K Body and ball, ENP ball, metal/metal seal, TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (9)
Globe valves
5000 Lbs SW, (5), Stellite coated OS&Y, BB (8) (11)
Plug valves
5000 Lbs SW, PTFE seals (6) (11) Wrench operated
API 6A grade 60K Body, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
5000 Lbs SW, BC (5) Stellite coated (7) (11) Horizontal piston lift
API 6A grade 60K Body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
API 6A grade 60K Body, F6 Trim, (8) Flanged OS&Y, BB
Butterfly valves Check valves Filters
5000 Lbs, SW, Y type, stainless steel strainer (11)
Tee type filters, carbon steel (11) as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per API 6A, type BX - 90 HRB max, 5000 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Swivel plug disc
(3) Ring joint facing, raised face, API 6A type 6BX
(9) Firesafe and Anti-static
(4) Single-piece wedge
(10) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(11) Carbon steel per API 6A grade 60K
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Carbon steel (12)
Rating:
5000 Lbs RJ API 6A
Service:
Hydrocarbons (non corrosive) (wet H2S)
Corrosion allowance:
1.27 mm
Production gas (HP, non corrosive) (wet H2S)
CLASS
K 01 S Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec. Fittings
Flanges
¾
1
1½
2
3
4
160
6
8
Pressure (bars)
345
345
345
345
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
XXS
18
20
24 26
36
To be calculated
PE
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (10)
5000 Lbs RJ, SW (3) API 6A type 6BX (11)
WN, 5000 Lbs RJ, API 6A type 6BX, Hub thickness as per pipe schedule, blind flanges (3) (11) WN, 5000 Lbs RJ, Orifice Support Assembly, supplied with bolting (3) (11)
Gate valves
5000 Lbs SW, Stellite coated OS&Y, BB (4) (11)
API 6A grade 60K Body, trim stellite coated OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
5000 Lbs SW (9) 316 Trim, PTFE seals trunnion mounted (11)
API 6A grade 60K Body and ball, ENP ball, metal/metal seal, TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (9)
Globe valves
5000 Lbs SW, (5), Stellite coated OS&Y, BB (8) (11)
Plug valves
5000 Lbs SW, PTFE seals (6) (11) Wrench operated
API 6A grade 60K Body, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
5000 Lbs SW, BC (5) Stellite coated (7) (11) Horizontal piston lift
API 6A grade 60K body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
API 6A grade 60K Body, F6 Trim, (8) Flanged OS&Y, BB
Butterfly valves Check valves Filters
5000 Lbs, SW, Y type, stainless steel strainer (11)
Tee type filters, carbon steel (11) as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per API 6A, type BX - 90 HRB max, 5000 Lbs rating
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Swivel plug disc
(3) Ring joint facing, raised face, API 6A type 6BX
(9) Firesafe and Anti-static
(4) Single-piece wedge
(10) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(11) Carbon steel per API 6A grade 60K
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(12) All materials shall comply with the NACE MR 01-75 Standard & with the specification GS PVV 612. Valve materials shall also conform to the specification GS PVV 613
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Carbon steel
Rating:
5000 Lbs RJ API 6A
Service:
Corrosive hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm (12)
CLASS
K 03 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec. Fittings
Flanges
¾
1
1½
2
3
4
6
8
Pressure (bars)
345
345
345
345
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
18
20
24 26
36
To be calculated
XXS
PE
BE API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (10)
5000 Lbs RJ, SW (13) API 6A type 6BX (11)
WN, 5000 Lbs RJ, API 6A type 6BX, Hub thickness as per pipe schedule, blind flanges (3) (11) WN, 5000 Lbs RJ, Orifice Support Assembly, supplied with bolting (3) (11)
Gate valves
5000 Lbs SW, Stellite coated OS&Y, BB (4) (11)
API 6A grade 60K Body, trim stellite coated OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
5000 Lbs SW, (9) 316 Trim, PTFE seals trunnion mounted (11)
API 6A grade 60K Body and ball, ENP ball, metal/metal seal, TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (9)
Globe valves
5000 Lbs SW, (5), Stellite coated OS&Y, BB (8) (11)
Plug valves
5000 Lbs SW, PTFE seals (6) (11) Wrench operated
API 6A grade 60K Body, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
5000 Lbs SW, BC (5) Stellite coated (7) (11) Horizontal piston lift
API 6A grade 60K body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
API 6A grade 60K Body, F6 Trim, (8) Flanged OS&Y, BB
Butterfly valves Check valves Filters
5000 Lbs, SW, Y type, stainless steel strainer (11)
Tee type filters, carbon steel (11) as per SD PVV 103
Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per API 6A, type BX - 90 HRB max, 5000 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Swivel plug disc
(3 Ring joint facing, raised face, API 6A type 6BX
(9) Firesafe and Anti-static
(4) Single-piece wedge
(10) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(11) Carbon steel per API 6A grade 60K
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(12) Corrosion allowance limited to 1.7 mm only for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Carbon steel
Rating:
10000 API RJ
Service:
Well kill fluid
Corrosion allowance:
1.27 mm
CLASS
L 01 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
Schedule Ends Mat.Spec.
¾
1
1½
2
3
4
6
14 mm
20 mm
24 mm
35 mm
8
Pressure (bars)
690
690
690
690
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
18
20
24 26
To be calculated
BE API 5 L X60 seamless
Fittings
Thickness as per pipe schedule, BW, 45° or 90° long radius elbows concentric/excentric reducers, stub-in, tees, weldolets (1) (2) (5), 2" to 4" butt weld ends Wing Union (WECO or equal), and blanking cap for Wing Union API 10000
Flanges
Per API 6A, WN RJ, 60K material, 10000 Lbs, Type 6BX, (3), diameters 2"1/16, 3"1/16, 4"1/16, 7"1/16 (for nominal sizes 2, 3, 4 and 6" respectively), blind flanges
Gate valves
36
API 6A 10000 Lbs, API 6A 60K Body material, Trim F6 stellite coated, OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves Globe valves Plug valves Butterfly valves Check valves
API 6A 60K Body material, Trim F6 stellite coated, Swing type (flanged, BC or pressure seal)
Filters Gaskets
Octogonal Ring Joint, Soft Iron (Armco), per API 6A, type BX - 90 HRB max, 10000 Lbs
Bolting
Studs A193 B7, Hh nuts A194 2H
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3) Flanges to be supplied with 150 mm long transition piece welded to Hub and properly heat treated, transition piece material to match pipe, with end prepared for welding to pipe
(4) Single-piece wedge, design in accordance with manufacturer standard (CAMERON/Mc EVOY model C, or FMC model 130, or WKM model D600, or VETCO model GRAYGATE, or equal); seals and packing suitable for full differential pressure @ 103°C (5) All fittings per MSS SP 75, class WPHY60 elbows & tees shall be reinforced to provide wear allowance
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Carbon steel
Rating:
10000 Lbs RJ - API 6A
Service:
Corrosive hydrocarbons (CO2 light corrosion)
Corrosion allowance:
3 mm (12)
CLASS
L 03 Date:
07/01
Rev.:
00
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
½
¾
1
Schedule
XXS
Ends Mat.Spec.
PE
Fittings
Flanges
1½
2
3
4
6
8
Pressure (bars)
450
450
450
450
Temperature (°C)
- 29
+ 37
+ 100
+ 200
10
12
14
16
11.6 15.5 18.9 26.2 mm mm mm mm
18
20
24 26
36
To be calculated BE
API 5 L X60 seamless
API 5L X60 - SAW - 100 % X-ray
6000 Lbs SW, A105 45° or 90° elbows (2) couplings, tees, sockolets
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (10)
10000 Lbs RJ, SW (3) API 6A type 6BX (11)
WN, 10000 Lbs RJ, API 6A type 6BX, Hub thickness as per pipe schedule, blind flanges (3) (11) WN, 10000 Lbs RJ, Orifice Support Assembly, supplied with bolting (3) (11)
Gate valves
10000 Lbs SW, Stellite coated OS&Y, BB (4) (11)
API 6A grade 60K Body, trim stellite coated OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
10000 Lbs SW, (9) 316 Trim, PTFE seals trunnion mounted (11)
API 6A grade 60K Body and ball, ENP ball, metal/metal seal, TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (9)
Globe valves
10000 Lbs SW, (5), Stellite coated OS&Y, BB (8) (11)
Plug valves
10000 Lbs SW, PTFE seals (6) (11) Wrench operated
API 6A grade 60K Body, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
10000 Lbs SW, BC (5) Stellite coated (7) (11) Horizontal piston lift
API 6A grade 60K body, Trim stellite coated for diameters 2" to 4" and F6 for diameters 6" and above, Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
API 6A grade 60K Body, F6 Trim, (8) Flanged OS&Y, BB
Butterfly valves Check valves
Filters
10000 Lbs, SW, Y type, stainless steel strainer (11)
Gaskets
Tee type filters, carbon steel (11) as per SD PVV 103
Octogonal Ring Joint, Soft Iron (Armco), per API 6A, type BX - 90 HRB max, 10000 Lbs rating
Bolting
Studs A193 B7, Hh nuts A194 2H Reversible obturators, carbon steel as per SD PVV 102
Miscellaneous NOTES (1) Connections to be calculated by ENGINEERING COMPANY
(7) Horizontal installation
(2) Bending not permitted
(8) Swivel plug disc
(3) Ring joint facing, raised face, API 6A type 6BX
(9) Firesafe and Anti-static
(4) Thru conduit gate valves
(10) All fittings per MSS SP 75, class WPHY60
(5) Removable seat
(11) Carbon steel per API 6A grade 60K
(6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(12) Corrosion allowance limited to 0.5 mm for fittings below 2 inches
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112
Material:
Carbon steel (12)
Rating:
Service:
Hydrocarbons (wet H2S + Co2) light corrosion
Corrosion allowance:
3 mm
L 03 N Date:
07/01
Rev.:
00
Pressure / Temperature limits
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
CLASS 10000 Lbs Hub Connector
Schedule Ends Mat.Spec. Fittings
Flanges
½
¾
1
XXS
Pressure (bars)
500
500
500
500
Temperature (°C)
- 29
+ 37
+ 100
+ 150
1½
2
3
4
6
8
11.3 mm
13.3 mm
17.9 mm
22.1 mm
30.8 mm
39.1 mm
PE
10
12
14
16
18
20
24
36
To be calculated
BE API 5 L X60 seamless
9000 Lbs SW, A105, couplings, tees, 45° or 90° elbows sockolets (2)
API 5 L X60 - SAW - 100 % X-ray
Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, sub-in, tees, weldolets (1) (10)
Hub connector material per API 6A grade 60K, Clamp material per AISI 4130, (clamp to be PTFE or polyethylene coated, Hub thickness as per pipe schedule) (3)
Gate valves
10000 Lbs SW, (11), Stellite coated, OS&Y, BB (4)
API 6A grade 60K body & trim, Trim stellite coated, OS&Y, BB, Gearbox for diameter 4” and above (3) (4)
Ball valves
10000 Lbs SW, (11) 316Trim, PTFE seals Trunnion mounted (13)
API 6A grade 60K body & trim, metal/metal seal, TPE or SPB, Trunnion mounted, Gearbox for diameters 4” and above (3) (9)
Globe valves
10000 Lbs SW, (11), Stellite coated OS&Y, BB (5) (8)
Plug valves
10000 Lbs SW, (11) PTFE seals (6) Wrench operated
API 6A grade 60K Body, F6 Trim (8), OS&Y, BB (3) API 6A grade 60K body, PTFE seals (6), wrench operated for diameters up to 2”, gearbox for diameters 3” and above (3)
Butterfly valves Check valves
Filters
10000 Lbs SW, (11), BC API 6A grade 60K Body, Trim stellite coated for diameters 2” to 4” and F6 for diameters 6” and Stellite coated (5) (7) above, Horizontal piston lift Dual-Plate (3) ; Swing type (BC or pressure seal) is acceptable if density is above 0.7 (3) 10000 Lbs SW, Y type stainless steel strainer, (11)
Tee type filters, carbon steel (11), as per SD PVV 103
Gaskets
Per manufacturer recommendation for Hub Connectors, Soft Iron (Armco)
Bolting
Studs A193 B7M, Hh nuts A194 2HM
Miscellaneous
Reversible obturators, Inconel 625 as per SD PVV 102
NOTES (1) Connections to be calculated by ENGINEERING COMPANY (2) Bending not permitted (3)Hub connectors shall be all of the same manufacturer (4) Thru conduit gate valve (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C. (7) Horizontal installation (8) Swivel plug disc
(9) Firesafe and Anti-static (10) Forged fittings per MSS SP 75, class WPHY 60 (11) Carbon steel as per API 6A grade 60K (12) All materials shall comply with the NACE MR 01 75 Standard & with the specification GS PVV 622. Valve materials shall also conform to the specification GS PVV 613 (13) Fitted with pipe nipples L = 100 mm
727$/),1$(/)
PIPING MATERIALS
GS PVV 112
Exploration & Production
Material:
Duplex UNS S31803
Rating:
10000 API RJ
Service:
Hydrocarbons (CO2 heavy corrosion)
Corrosion allowance:
0 mm
CLASS
L 70 Date:
07/01
Rev.:
00
Pressure (bars) Temperature (°C)
Diameter Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
Pressure / Temperature limits
Schedule Ends Mat.Spec. Fittings
Flanges
½
¾
1
80 S
1½
2
3
4
6
8
6.2 mm
7.8 mm
11.4 mm
14.7 mm
21.6 mm
28.1 mm
PE
10
12
14
483.0
483.0
483.0
483.0
- 46
+ 37
+ 100
+ 175
16
18
20
24 26
To be calculated BE
ASTM A 790 UNS S31803 seamless or SAW - 100 % radiography 9000 Lbs, SW, (2) A182 F51, couplings, tees, sockolets, 45° or 90° elbows
ASTM A 815-S31803, class WP - S or WX material, Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in tees, weldolets (1) (11)
10000 API, RJ, SW A182 F51 (3)
ASTM A 182 F51 material, 190 HRB minimum hardness WN, 10000 API, RJ, Hub thickness as per pipe schedule, blind flanges (3) WN, 10000 API, RJ, Orifice Support Assembly, supplied with bolting
Gate valves
10000 API, SW, OS&Y, BB Stellite coated A182 F51(4)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", OS&Y, BB, Gearbox for diameter 4" and above, Flanged (4)
Ball valves
10000 API, SW (8) (10) A182 F51, PTFE seals Trunnion mounted
UNS S31803 Body & trim, PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4" and above, Flanged (10)
Globe valves
10000 API, A182 F51, SW, Stellite coated OS&Y, BB (5) (9)
Plug valves
10000 API, A182 F51, SW, PTFE seals (6) Wrench operated
UNS S31803 Body and Trim, Flanged, OS&Y BB (9) UNS S31803, PTFE seals (6), Flanged, wrench operated for diameters up to 2", gearbox for diameters 3" and above
Butterfly valves Check valves
Filters
10000 API, SW, BC, Stellite coated, A182 F 51 (5) (7) (12)
UNS S31803 Body & trim, Trim stellite coated for diameters 2" to 4", Dual-Plate (Wafer type). Swing type (flanged, BC or pressure seal) is acceptable if density is above 0.7
10000 API SW UNS S31803 body & strainer, Y type
Tee type filters, UNS S31803
Gaskets
Stainless Steel Octogonal Ring Joint per API 6A, 10000 API rating, 83 HRB maximum hardness
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, UNS S31803
Miscellaneous NOTES (1) (2) (3) (4) (5) (6)
Connections to be calculated by ENGINEERING COMPANY Bending not permitted Ring joint facing. Flanges as per API 6A Single-piece wedge Removable seat Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C
(7) Horizontal installation (8) PTFE seals temperature limit = 200°C (9) Swivel plug disc (10) Firesafe and Anti-static (11) Welded wrought fittings must be 100 % radiographed after forming (12) Horizontal piston lift
36
727$/),1$(/)
PIPING MATERIALS
Exploration & Production
GS PVV 112 CLASS
Material:
Inconel 625
Rating:
10000 Lbs Hub Connector
Service: (14)
Hydrocarbons (H2S + CO2 + Chlorides : heavy corrosion)
Corrosion allowance:
0 mm
Pipes
“This document is the property of TotalFinaElf. It must not be reproduced or transmitted to others without written authorisation from the Company”
½
¾
1
Schedule
80 S
Ends
PE
1½
Flanges
07/01
Rev.:
00
Pressure (bars)
500
500
500
500
Temperature (°C)
- 29
+ 37
+ 100
+ 200
2
3
4
6
8
5.9 mm
8.6 mm
11.1 mm
16.3 mm
21.2 mm
10
12
14
16
18
20
24
26
36
To be calculated BE
Mat.Spec. Fittings
Date:
Pressure / Temperature limits
Production gas (gas + liquid + salt water)
Diameter
L 73
ASTM B 444 UNS No 6625 Gr 1 seamless or SAW-100% radiography (11) 3000 Lbs SW, Inconel 625, couplings, tees, 45° or 90° elbows sockolets (2) (11) (13)
ASTM B 366 Gr WPNCMC, S or WX material Thickness as per pipe schedule, BW, 45° or 90° elbows (r = 1.5 dia.) concentric/excentric reducers, stub-in, tees, weldolets (1) (11) (12)
Hub connector material per ASTM B 564 UNS No 6625, Clamp material per AISI 4130, (clamp to be PTFE or Polyethylene coated, Hub thickness as per pipe schedule) (3) (11)
Gate valves
10000 Lbs SW, Inconel 625, Stellite coated OS&Y, BB (4)
Inconel 625 Body & trim (16), Trim stellite coated, OS&Y, BB, Gearbox for diameter 4” and above (3) (4)
Ball valves
10000 Lbs SW, Inconel 625, PTFE seals (8) (15) Trunnion mounted (10)
Inconel 625 Body & trim (16), PTFE seal (8), TPE or SPB, Trunnion mounted, Gearbox for diameters 4” and above (3) (10)
Globe valves
10000 Lbs SW, Inconel 625, Stellite coated OS&Y, BB (5) (9)
Plug valves
10000 Lbs SW, Inconel 625, PTFE seals (6) Wrench operated
Inconel 625 Body and Trim (3), OS&Y, BB (9) Inconel 625 body & trim (16), PTFE seals (6), wrench operated for diameters up to 2”, gearbox for diameters 3” and above (3)
Butterfly valves Check valves Filters
10000 Lbs SW, 625, BC Stellite coated (5) (7) Horizontal piston lift
Inconel 625 Body and trim (16), Trim stellite coated for diameters 2” to 4”, Dual-Plate (3) ; Swing type (BC or pressure seal) is acceptable if density is above 0.7 (3)
10000 Lbs SW, Inconel 625 body & strainer, Y type
Tee type filters, Inconel 625, as per SD PVV 103
Gaskets
Per Manufacturer recommendation for Hub Connectors, Inconel 625 grade 2
Bolting
Studs A193 B7M, Hh nuts A194 2HM Reversible obturators, Inconel 625 as per SD PVV 102
Miscellaneous NOTES (1) (2) (3) (4)
Connections to be calculated by ENGINEERING COMPANY Bending not permitted Hub connectors Single-piece wedge for diameters up to 24” and Flexible wedge for diameters 26” and above (5) Removable seat (6) Service pressure according to temperature and supplier’s recommendations. Use as per P&ID indications. Maximum temperature = 180°C (7) Horizontal installation
(8) (9) (10) (11) (12) (13) (14) (15) (16)
PTFE seals temperature limit = 200°C Swivel plug disc Firesafe and Anti-static Allowable stress 40 ksi (UTS = 120 ksi & YS = 60 ksi) Welded wrought fittings WX must be 100% radiographed after forming Forged fittings per ASTM B 564 UNS No 6625 NACE MR 01 75 is fully applicable Fitted with pipe nipples L = 100 mm Sch 80 S For sizes 4” and above, acceptable alternate: ASTM A105 + Inconel 625 weld overlay