10 0 4 MB
JASA INFORMASI STANDARDISASI
STANDARDS INFORMATION SERVICES
Jika memerlukan informasi lebih lanjut mengenai standardisasi, BSN memberikan jasa informasi tentang standar nasional, regional, dan internasional serta semua hal yang berkaitan dengan standardisasi termasuk sistem penilaian kesesuaian, yang diberikan melalui antara lain :
If further information is required, BSN provide information services on national, regional and international standards, as well as topics related to standardization including conformity assessment system, which is provided by among others :
Layanan Perpustakaan menyajikan koleksi yang cukup lengkap di bidang standardisasi, meliputi : Standar Nasional Indonesia, standar internasional (ISO, IEC, Codex Alimentarius Commission, standar negara lain (JIS, BS, DIN, ASTM, dll.), katalog standar, buletin tentang standardisasi, serta literatur tentang standardisasi dan penilaian kesesuaian.
Library Services provide reasonably complete collection in the field of standardization, including : Indonesian National Standard (SNI), international standards ISO, IEC, Codex Alimentarius Commission, foreign national standards (JIS, BS, DIN, ASTM, etc,), standard catalogues, bulletins on standardization, literatures in standardization and conformity assessment.
Layanan Penelusuran Informasi melayani penelusuran informasi dengan menggunakan sumber informasi nasional dan asing. Tersedia pula CD-ROM data bibliografis standar.
Inquiry Services provide inquiry services and information search using national and foreign sources. Bibliographical data in CD-ROM are also available.
Layanan Pemesanan Standar melayani pemesanan standar internasional (ISO, IEC) dan standar nasional mancanegara.
Ordering Services provide ordering services on international standards (ISO, IEC) and foreign national standards.
Website BSN Informasi standardisasi disajikan pula melalui website BSN dengan alamat: http://www.bsn.go.id Informasi tersebut antara lain memuat dokumen lengkap SNI hasil penetapan satu tahun terakhir.
BSN Website Standardization information is presented in BSN website with following address: http://www.bsn.go.id The information provided includes electronic documents of SNI approved in the past one year.
Pusat Informasi dan Dokumentasi Standardisasi BSN Centre for Information and Documentation of Standardization Gedung BPPT I, Lantai dasar (GF) Jl. MH. Thamrin 8, Kebon Sirih, Jakarta Pusat Jakarta 10340 TP : + 62 21 392 7422, ext. 235, 237 TF : + 62 21 392 7527 E-mail : [email protected]; [email protected] Website : http://www.bsn.go.id
x
Struktur Subjek Indeks International Classification Standard (ICS) International Classification Standard (ICS) Subject Structure Index
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015 Kode ICS
ICS Structure Hal
Judul ICS
ICS Code
ICS Title
Pages
01
UMUM.TERMINOLOGI. STANDARDISASI. DOKUMENTASI
GENERALITIES.TERMINOLOGY.STANDARDIZATION. DOCUMENTATION
13
01.040
Kosa kata
Vocabularies
13
01.060
Besaran dan satuan
Quantities and units
17
01.070
Kode warna
Colour coding
17
01.080
Simbol grafis
Graphical symbols
17
01.100
Gambar teknik
Technical drawings
18
01.110
Dokumentasi produk teknik
Technical product documentation
18
01.140
Ilmu informasi. Penerbitan
Information sciences. Publishing
18
03
SOSIOLOGI. JASA. ORGANISASI DAN MANAJEMEN PERUSAHAAN
SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT
20
03.040
Tenaga kerja. Pekerjaan
Labour. Employment
20
03.080
Jasa
Services
20
03.100
Organisasi dan manajemen perusahaan
Company organization and management
20
03.120
Mutu
Quality
22
03.180
Pendidikan
Education
24
03.220
Transportasi
Transport
24
03.240
Jasa pos
Postal services
24
07
MATEMATIKA. ILMU PENGETAHUAN ALAM
MATHEMATICS. NATURAL SCIENCES
25
07.030
Fisika. Kimia
Phisics. Chemistry
25
07.040
Astronomi. Geodesi. Geografi
Astronomy. Geodesy. Geography
25
07.060
Geologi. Meteorologi. Hidrologi
Geology. Meteorology. Hydrology
26
07.100
Mikrobiologi
Microbiology
26
11
TEKNOLOGI PERAWATAN KESEHATAN
HEALTH CARE TECHNOLOGY
29
11.040
Peralatan medis
Medical equipment
29
11.060
Kedokteran gigi
Dentistry
35
11.080
Sterilisasi
Sterilization
35
11.100
Ilmu kedokteran laboratorium
Laboratory medicine
36
11.120
Farmasi
Pharmaceutics
36
11.140
Peralatan rumah sakit
Hospital equipment
36
11.180
Pertolongan untuk orang tidak mampu atau orang cacat
Aids for disabled or handicapped persons
37
11.200
Keluarga berencana Kontraseptif mekanis
Birth control. Mechanical contraceptives
37
13
PERLINDUNGAN LINGKUNGAN DAN KESEHATAN. KESELAMATAN
ENVIRONMENT AND HEALTH PROTECTION. SAFETY
38
13.020
Perlindungan lingkungan secara umum
Environment protection in general
38
13.030
Limbah
Wastes
39
13.040
Kualitas udara
Air quality
39
13.060
Kualitas air
Water quality
41
13.080
Kualitas tanah. Pedologi
Soil quality. Pedology
46
13.100
Keselamatan kerja. Higiene industri
Occupational safety. Industrial hygiene
47
13.110
Keamanan permesinan
Safety of machinery
47
13.120
Keselamatan rumah tangga
Domestic safety
47
13.140
Bunyi yang berhubungan dengan manusia
Noise with respect to human beings
48
13.160
Getaran dan kejutan yang berhubungan dengan manusi
Vibration and shock with respect to human beings
48
13.180
Ergonomi
Ergonomics
48
13.200
Kecelakaan dan pengendalian bencana
Accident and disaster control
48
13.220
Perlindungan terhadap kebakaran
Protection against fire
48
13.230
Perlindungan ledakan
Explosion protection
49
13.240
Perlindungan terhadap tekanan berlebihan
Protection against excessive pressure
49
13.260
Perlindungan terhadap kejutan listrik
Protection against electric shock
50
13.280
Perlindungan terhadap radiasi
Radiation protection
50
-3-
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
13.300
Perlindungan terhadap barang berbahaya
Protection against dangerous goods
51
13.320
Alarm dan sistem tanda bahaya
Alarm and warning systems
51
13.340
Peralatan pelindung
Protective equipment
51
17
METROLOGI DAN PENGUKURAN. FENOMENA FISIKA METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA
52
17.020
Metrologi dan pengukuran secara umum
Metrology and measurement in general
52
17.040
Pengukuran panjang dan sudut
Linear and angular measurements
52
17.060
Pengukuran volume, masa, kerapatan, viskositas
Measurement of volume, mass, density, viscosity
53
17.100
Pengukuran gaya berat dan tekanan
Measurement of force, weight and pressure
53
17.120
Pengukuran aliran fluida
Measurement of fluid flow
53
17.140
Akustik dan pengukuran akustik
Acoustics and acoustic measurements
53
17.160
Getaran, kejutan dan pengukuran getaran
Vibrations, shock and vibration measurements
54
17.180
Optik dan pengukuran optik
Optics and optical measurements
54
17.200
Termodinamika dan pengukuran suhu
Thermodynamics and temperature measurements
54
17.220
Listrik. Magnetisme. Pengukuran listrik dan magnit
Electricity. Magnetism. Electrical and magnetic me
54
17.240
Pengukuran radiasi
Radiation measurements
55
19
PENGUJIAN
TESTING
57
19.020
Kondisi dan prosedur pengujian secara umum
Test conditions and procedures in general
57
19.040
Pengujian lingkungan
Environmental testing
57
19.060
Pengujian mekanika
Mechanical testing
57
19.080
Pengujian listrik dan elektronik
Electrical and electronic test and measuring equip
57
19.100
Pengujian tanpa merusak
Non-destructive testing
58
19.120
Analisis ukuran partikel Pengayakan
Particle size analysis. Sieving
59
21
SISTEM MEKANIKA DAN KOMPONEN UNTUK PENGGUNAAN UMUM
MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE
60
21.020
Karakteristik dan desain mesin, aparat, peralatan
Characteristics and design of machines, apparatus,
60
21.040
Ulir sekerup
Screw threads
60
21.060
Pengencang
Fasteners
60
21.080
Engsel, lubang tali dan sambungan lainnya
Hinges, eyelets and other articulated joints
61
21.100
Bantalan
Bearings
61
21.120
Poros dan kopling
Shafts and couplings
62
21.140
Segel, gelang penekan
Seals, glands
62
21.160
Pegas
Springs
62
21.180
Rumah, selungkup dan suku cadang mesin lainnya
Housings, enclosures, other machine parts
62
21.200
Roda gigi
Gears
62
21.220
Penggerak fleksibel dan trasmisi
Flexible drives and transmissions
62
23
SISTEM FLUIDA DAN KOMPONEN UNTUK PENGGUNAAN UMUM
FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE
64
23.020
Alat penyimpan fluida
Fluid storage devices
64
23.040
Komponen saluran pipa dan saluran pipa
Pipeline components and pipelines
64
23.060
Katup
Valves
66
23.080
Pompa
Pumps
67
23.100
Sistem daya fluida
Fluid power systems
67
23.120
Ventilasi, Kipas angin, Pengatur udara
Ventilators. Fans. Air-conditioners
68
23.140
Kompresor dan mesin pneumatik
Compressors and pneumatic machines
68
25
REKAYASA MANUFAKTUR
MANUFACTURING ENGINEERING
69
25.040
Sistem otomasi industri
Industrial automation systems
69
25.060
Sistem mesin perkakas
Machine tools systems
69
25.080
Mesin perkakas
Machine tools
69
25.100
Perkakas potong
Cutting tools
70
25.120
Peralatan kerja tanpa bilah
Chipless working equipment
71
25.140
Perkakas pegangtangan
Hand-held tools
71
25.160
Pengelasan, penyepuhan dan pematrian
Welding, brazing and soldering
72
25.220
Perlakuan permukaan dan pelapisan
Surface treatment and coating
73
-4-
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
27
REKAYASA ENERGI DAN PEMINDAHAN PANAS
ENERGY AND HEAT TRANSFER ENGINEERING
74
27.010
Rekayasa energi dan pemindahan panas secara umum
Energy and heat transfer engineering in general
74
27.020
Mesin pembakaran internal
Internal combustion engines
74
27.040
Mesin bahan bakar dan uap. Mesin uap
Gas and steam turbines. Steam engines
74
27.060
Pembakar. Ketel uap
Burners. Boilers
74
27.100
Pusat tenaga secara umum
Power stations in general
74
27.120
Rekayasa energi nuklir
Nuclear energy engineering
74
27.140
Rekayasa energi hidrolik
Hydraulic energy engineering
75
27.160
Rekayasa energi surya
Solar energy engineering
76
27.180
Turbin angin dan sumber energi alternatif lainnya
Wind turbines and other alternative sources of ene
77
27.190
Sumber biologi dan sumber alternatif energi
Biological sources and alternative sources of energy
77
27.200
Teknologi pendingin
Refrigerating technology
77
27.220
Takal panas Penyekat panas
Heat recovery. Thermal insulation
77
29
REKAYASA LISTRIK
ELECTRICAL ENGINEERING
79
29.020
Rekayasa listrik secara umum
Electrical engineering in general
79
29.035
Bahan isolasi
Insulating materials
80
29.040
Cairan isolasi
Insulating fluids
81
29.045
Bahan semikonduktor
Semi-conducting materials
81
29.050
Bahan penghantar
Conducting materials
81
29.060
Kawat dan kabel listrik
Electrical wires and cables
81
29.080
Isolasi
Insulation
84
29.100
Komponen untuk peralatan listrik
Components for electrical equipment
85
29.120
Lengkapan listrik
Electrical accessories
86
29.130
Papan hubung bagi dan kendali
Switchgear and controlgear
91
29.140
Lampu dan peralatan yang berkaitan
Lamps and related equipment
92
29.160
Mesin berputar
Rotating machinery
94
29.180
Transformator Reaktor
Transformers. Reactors
95
29.200
Penyearah. Konvertor. Suplai tenaga yang distabilk
Rectifiers. Converters. Stabilized power supply
97
29.220
Sel galvanis dan batere
Galvanized cell and batteries
97
29.240
Jaringan distribusi tenaga
Power distribution networks
29.260
Peralatan listrik untuk bekerja dalam kondisi khusus
Electrical equipment for working in special condition
29.280
Peralatan traksi listrik
Electric traction equipment
88 100 100
102
31
ELEKTRONIKA
ELECTRONICS
31.020
Komponen elektronik secara umum
Electronic components in general
102
31.040
Resistor
Resistors
102
31.060
Kapasitor
Capacitors
102
31.080
Piranti semikonduktor
Semi-conductor devices
102
31.100
Tabung elektronik
Electronic tubes
102
31.180
Rangkaian dan papan tercetak
Printed circuits and boards
103
31.220
Komponen elektromekanik untuk peralatan elektronik
Electromechanical components for electronic and te
103
31.260
Optoelektronik. Peralatan laser
Optoelectronics. Laser equipment
103
33
TELEKOMUNIKASI
TELECOMMUNICATIONS
104
33.020
Telekomunikasi secara umum
Telecommunications in general
104
33.040
Sistem telekomunikasi
Telecomunication systems
104
33.050
Peralatan terminal telekomunikasi
Telecomunication terminal equipment
105
33.060
Komunikasi radio
Radiocommunications
105
33.100
Kompatibiltas elektromagnetik (EMC)
Electromagnetic compatibility (EMC)
105
33.120
Komponen dan lengkapan untuk peralatan telekomunik
Components and accessories for telecommunication e
106
33.160
Rekayasa audio video dan audiovisual
Audio, video and audiovisual engineering
107
33.180
Komunikasi serat optik
Fibre optic communications
108
33.200
Kendali jarak jauh Pengukuran jarak jauh
Telecontrol. Telemetering
108
35
TEKNOLOGI INFORMASI. PERALATAN KANTOR
INFORMATION TECHNOLOGY. OFFICE EQUIPMENT
35.020
Teknologi informasi (IT) secara umum
lnformation technology (IT) in general
109
35.040
Set huruf dan pengkodean informasi
Character sets and information coding
111
-5-
109
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
35.080
Pengembangan perangkat lunak dan dokumentasi sist
Software development and system documentation
111
35.160
Sistem mikroprosesor
Microprocessor systems
112
35.180
Terminal dan peralatan peripheral lainnya
Terminal and other peripheral equipment
112
35.220
Alat penyimpan data
Data storage devices
112
35.240
Aplikasi teknologi informasi
Applications of information technology
112
35.260
Peralatan kantor
Office equipment
115
37
TEKNOLOGI GAMBAR
IMAGE TECHNOLOGY
37.020
Peralatan optik
Optical equipment
116
37.040
Fotografi
Photography
116
39
MEKANIKA PRESISI. PERHIASAN
PRECISION MECHANICS. JEWELLERY
39.060
Perhiasan
Jewellery
43
REKAYASA KENDARAAN JALAN RAYA
ROAD VEHICLE ENGINEERING
43.020
Kendaraan jalan raya secara umum
Road vehicles in general
118
43.040
Sistem kendaraan jalan raya
Road vehicle systems
118
43.060
Motor bakar untuk kendaraan jalan raya
Internal combustion engines for road vehicles
120
43.080
Kendaraan komersial
Commercial vehicles
122
43.100
Mobil penumpang. Karavan dan kereta gandengan ring
Passenger cars. Caravans and light trailers
122
43.140
Kendaraan bermotor roda dua dan moped
Motorcycles and mopeds
122
43.150
Sepeda
Cycles
122
43.160
Kendaraan untuk tujuan khusus
Special purpose vehicles
122
43.180
Peralatan diagnostik, pemeliharaan dan pengujian
Diagnostic, maintenance and test equipment
122
45
REKAYASA PERKERETAAPIAN
RAILWAY ENGINEERING
45.040
Bahan dan komponen untuk rekayasa perkeretaapian
Materials and components for railway engineering
124
45.060
Lok dan kereta-kereta api
Railway rolling stock
124
45.080
Komponen rel dan jalan rel
Rails and railway components
116
117 117
118
124
124
125
47
BANGUNAN KAPAL DAN KONSTRUKSI KAPAL
SHIP BUILDING AND MARINE STRUCTURES
47.020
Bangunan dan konstruksi kapal secara umum
Shipbuilding and marine structures in general
125
47.060
Bejana navigasi darat
Inland navigation vessels
127
47.080
Kapal kecil
Small craft
128
49
REKAYASA PESAWAT TERBANG DAN KENDARAAN ANGKASA
AIRCRAFT AND SPACE VEHICLE ENGINEERING
49.020
Pesawat terbang dan kendaraan angkasa secara umum
Aircraft and space vehicles in general
53
PERALATAN PENANGANAN BAHAN
MATERIALS HANDLING EQUIPMENT
53.020
Peralatan pengangkat
Lifting equipment
130
53.040
Peralatan penanganan kontinyu
Continuous handling equipment
130
53.060
Industrial trucks
Truk industri
130
53.100
Mesin pengeruk tanah
Earth-moving machine
130
55
PENGEMASAN DAN DISTRIBUSI BARANG
PACKAGING AND DISTRIBUTION OF GOODS
55.020
Pengemasan dan distribusi barang secara umum
Packaging and distribution of goods in general
132
55.040
Bahan dan kelengkapan pengemasan
Packaging materials and accessories
132
55.060
Gelendong. Kumparan
Spools. Bobbins
132
55.080
Karung Kantong
Sacks.Bags
132
55.100
Botol jambanganBulibuli
Bottles. Pots. Jars
132
55.120
Kaleng Tabung
Cans. Tins. Tubes
133
55.140
Tong. Drum. Kanister
Barrels. Drums. Canisters
133
55.160
Kotak. Peti. Keranjang
Cases. Boxes. Crates
133
55.180
Distribusi angkutan barang
Freight distribution of goods
133
55.220
Penyimpanan Pergudangan
Storing. Warehousing
133
55.230
Mesin distribusi dan penjaja keliling
Distribution and vending machines
133
59
TEKNOLOGI TEKSTIL DAN KULIT
TEXTILE AND LEATHER TECHNOLOGY
59.040
Bahan tambahan tekstil
Textile auxiliary materials
-6-
129
129
130
132
134 134
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
59.060
Serat tekstil
Textile fibres
134
59.080
Produk industri tekstil
Products of the textile industry
136
59.120
Mesin tekstil
Textile machinery
143
59.140
Teknologi kulit
Leather technology
144
147
61
INDUSTRI PAKAIAN
CLOTHING INDUSTRY
61.020
Pakaian
Clothes
147
61.040
Tutup kepala Asesori pakaian Pengetat pakaian
Headgear. Clothing accessories. Fastening of cloth
147
61.060
Alas kaki
Footwear
148
61.080
Mesin jahit dan peralatan lainnya untuk industri pakaian
Sewing machines and other equipment for the clothi
149
65
PERTANIAN
AGRICULTURE
65.020
Pertanian dan kehutanan
Farming and forestry
150
65.040
Bangunan, konstruksi dan instalasi pertanian
Farm buildings, structures and installations
153
65.060
Mesin, perkakas dan peralatan pertanian
Agricultural machines, implements and equipment
153
65.080
Pupuk
Fertilizers
157
65.100
Pestisida dan bahan kimia pertanian lainnya
Pesticides and other agrochemicals
157
65.120
Pakan ternak
Animal feeding stuffs
158
65.145
Perburuan
Hunting
160
65.150
Penangkapan ikan dan pengembangbiakan ikan
Fishing and fish breeding
160
65.160
Tembakau, produk tembakau dan peralatan yang berka
Tobacco, tobacco products and related equipment
166
67
TEKNOLOGI PANGAN
FOOD TECHNOLOGY
67.020
Proses dalam industri makanan
Processes in the food industry
168
67.040
Produk makanan pertanian secara umum
Agricultural food products in general
168
67.050
Metode umum untuk pengujian dan analisa produk
General methods of tests and analysis for food products
168
67.060
Biji-bijian, kacang-kacangan dan produk turunan
Cereals, pulses and derived proaucts
169
67.080
Buah-buahan. Sayur-sayuran
Fruits. Vegetables
170
67.100
Susu dan produk susu
Milk and milk products
172
67.120
Daging, produk daging dan produk hewan lainnya
Meat, meat products and other animal produce
173
67.140
Teh. Kopi. Kakao
Tea.Cofee.Cocoa
181
67.160
Minuman
Beverages
181
67.180
Gula. Produk gula. Tepung
Sugar. Sugar products. Starch
182
67.190
Cokelat
Chocolate
183
67.200
Minyak dan lemak yang dapat di makan. Minyak biji-
Edible oils and fats. Oilseeds
183
67.220
Bumbu dan rempah-rempah. Bahan tambahan makanan
Spices and condiments. Food additives
184
67.230
Makanan dikemas dan makanan siap saji, termasuk makanan bayi
Prepackaged and prepared foods, including baby food
185
67.240
Analisis indera
Sensory analysis
185
67.250
Bahan dan benda yang bersentuhan dengan makanan
Materials and articles in contact with foodstuffs
185
67.260
Pabrik dan peralatan untuk industri makanan
Plants and equipment for the food industry
185
71
TEKNOLOGI KIMIA
CHEMICAL TECHNOLOGY
71.040
Kimia analitik
Analytical chemistry
187
71.060
Kimia anorganik
Inorganic chemicals
187
71.080
Kimia organik
Organic chemicals
189
71.100
Produk industri kimia
Products of the chemical industry
191
73
PERTAMBANGAN DAN MINERAL
MINING AND MINERALS
73.020
Pertambangan dan penggalian
Mining and quarrying
194
73.040
Batu bara
Coals
195
73.060
Mineral logam
Metalliferous minerals
195
73.080
Mineral non logam
Non-metalliferous minerals
196
73.100
Peralatan pertambangan
Mining equipment
197
73.120
Peralatan pengolahan mineral
Equipment for processing of minerals
197
75
MINYAK BUMI DAN TEKNOLOGI TERKAIT
FOSIL FUEL AND RELATED TECHNOLOGY
75.020
Ekstraksi dan pengolahan minyak bumi dan gas alam
Extraction and processing of petroleum and natural
198
75.060
Gas alam
Natural gas
198
-7-
150
168
187
194
198
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
75.080
Produk minyak bumi secara umum
Petroleum products in general
198
75.100
Pelumas, minyak industri dan produk yang berkaitan
Lubricants, industrial oils and related products
198
75.140
Lilin, bahan bitumin dan produk minyak bumi lainny
Waxes, bituminous materials and other petroleum pr
199
75.160
Bahan bakar
Fuels
200
75.180
Peralatan untuk industri minyak bumi dan gas alam
Equipment for petroleum and natural gas industries
201
75.200
Peralatan penanganan produk minyak bumi dan gas alam
Petroleum products and natural gas handling equipment
202
77
METALURGI
METALLURGY
204
77.040
Pengujian logam
Testing of metals
204
77.060
Korosi logam
Corrosion of metals
205
77.080
Logam besi
Ferrous metals
205
77.100
Besi Paduan
Ferroalloys
206
77.120
Logam bukan besi
Non-ferrous metals
206
77.140
Produk besi dan baja
Iron and steel products
207
77.150
Produk logam bukan besi
Products of non-ferrous metals
210
77.160
Metalurgi serbuk
Powder metallurgy
210
77.180
Peralatan untuk industri metalurgi
Equipment for the metallurgical industry
210
79
TEKNOLOGI KAYU
WOOD TECHNOLOGY
211
79.020
Proses teknologi kayu
Wood technology processes
211
79.040
Kayu, batang kayu gergajian dan gergajian
Wood, sawlogs and sawn timber
211
79.060
Panel kayu
Wood-based panels
213
79.080
Semi manufaktur kayu
Semi-manufactures of timber
215
79.120
Peralatan pengerjaan kayu
Woodworking equipment
215
81
INDUSTRI KACA DAN KERAMIK
GLASS AND CERAMICS INDUSTRIES
81.040
Gelas
Glass
216
81.060
Keramik
Ceramics
217
81.080
Barang tahan api
Refractories
218
81.100
Peralatan untuk industri gelas dan keramik
Equipment for the glass and ceramics industries
219
83
INDUSTRI KARET DAN PLASTIK
RUBBER AND PLASTICS INDUSTRIES
220
83.040
Bahan mentah untuk karet dan plastik
Raw materials for rubber and plastics
220
83.060
Karet
Rubber
220
83.080
Plastik
Plastics
222
83.100
Bahan seluler
Cellular materials
223
83.140
Produk karet dan plastik
Rubber and plastics products
223
83.160
Ban
Tyres
224
83.180
Perekat
Adhesives
225
83.200
Peralatan untuk industri karet dan plastik
Equipment for the rubber and plastics industries
225
85
TEKNOLOGI KERTAS
PAPER TECHNOLOGY
226
85.020
Proses produksi kertas
Paper production processes
226
85.040
Pulp
Pulps
226
85.060
Kertas dan karton
Paper and board
228
85.080
Produk kertas
Paperproducts
230
87
INDUSTRI CAT DAN WARNA
PAINT AND COLOUR INDUSTRIES
87.020
Proses pelapisan dengan cat
Paint coating processes
232
87.040
Cat dan pernis
Paints and varnishes
232
87.060
Bahan cat
Paint ingredients
233
87.080
Tinta .Tinta cetak
Inks. Printing inks
234
87.100
Peralatan pelapisan cat
Paint coating equipment
234
91
BAHAN KONSTRUKSI DAN BANGUNAN
CONSTRUCTION MATERIALS AND BUILDING
55
91.010
Industri konstruksi
Construction industry
235
91.040
Bangunan
Buildings
235
91.060
Elemen bangunan
Elements of buildings
235
91.080
Struktur bangunan
Structures of buildings
236
-8-
216
232
Senarai SNI 2015
Struktur ICS
SNI Catalogue 2015
ICS Structure
91.090
Struktur eksternal
External structures
237
91.100
Bahan konstruksi
Construction materials
237
91.120
Perlindungan dari dan di dalam bangunan
Protection of and in buildings
243
91.140
Instalasi dalam bangunan
Installations in buildings
91.160
Penerangan
Lighting
247
91.190
Perlengkapan bangunan
Building accessories
247
91.200
Teknologi konstuksi
Construction technology
248
91.220
Peralatan konstruksi
Construction equipment
248
93
REKAYASA SIPIL
CIVIL ENGINEERING
249
93.010
Rekayasa sipil secara umum
Civil engineering in general
249
93.020
Pekerjaan tanah. Penggalian. Konstruksi pondasi. Pekerjaan bawah tanah
Earthworks. Excavations. Foundation construction. Underground works
249
93.025
Sistem penyaluran air bagian luar
External water conveyance systems
250
93.030
Sistem pembuangan bagian luar
External sewage systems
250
93.040
Konstruksi jembatan
Bridge construction
251
93.060
Konstruksi terowongan
Tunnel construction
251
93.080
Rekayasa jalan
Road engineering
251
93.120
Konstruksi bandar udara
Construction of airports
253
93.140
Konstruksi jalan air dan pelabuhan
Construction of waterways and ports
253
93.160
Konstruksi hidrolik
Hydraulic construction
254
97
RUMAH TANGGA. HIBURAN. OLAH RAGA
HOUSEKEEPING. ENTERTAINMENT. SPORTS
97.020
Ekonomi rumah tangga secara umum
Home economics in general
256
97.030
Peralatan listrik domestik secara umum
Domestic electrical appliances in general
256
97.040
Peralatan dapur
Kitchen equipment
256
97.060
Peralatan binatu
Laundry apliances
258
97.080
Peralatan pemeliharaan lantai
Floor treatment appliances
258
97.100
Peralatan pemanas listrik rumah tangga
Household electrical heating appliances
258
97.130
Perabotan toko
Shop fittings
259
97.140
Mebel
Furniture
259
97.150
Penutup lantai bukan tekstil
Non-textile floor coverings
260
97.160
Tekstil rumah, Linen
Home textiles. Linen
260
97.170
Peralatan pemeliharaan tubuh
Body care equipment
260
97.180
Aneka peralatan rumah
Miscellaneous home equipment
260
97.190
Peralatan rumah tangga untuk anak-anak
Household equipment for children
260
97.195
Benda seni dan kerajinan
Items of art and handicrafts
260
97.200
Peralatan hiburan
Equipment for entertainment
261
97.220
Peralatan dan fasilitas olah raga
Sports equipment and facilities
261
-9-
55
256
Data SNI Berdasarkan Subjek ICS List of SNI by ICS Subject
- 12 -
01
UMUM.TERMINOLOGI. STANDARDISASI. DOKUMENTASI
01.020
Terminology (principles and coordination)
Terminologi Prinsip-prinsip dan koordinasi
SNI 6728.3:2015
01.040
Penyusunan neraca spasial sumber daya alam - Bagian 3: Sumber daya lahan
Preparation of the spatial balance of natural resources - Part 3: Land resources
26
Vocabularies
Kosa kata
SNI IEC 60050-651:2009
GENERALITIES.TERMINOLOGY.STANDARDIZATION. DOCUMENTATION
Kosakata elektroteknik - Bagian 651: Pekerjaan dalam keadaan bertegangan
International Electrotechnical Vocabulary - Part 651: Live working
24
International Electrotechnical Vocabulary - Chapter 411: Rotating machinery
68
IEC 60050-651:1999 Translation SNI IEC 60050-411:2009
IDT Kosakata elektroteknik - Bagian 411: Mesin Putar
IEC 60050-411:2009, International Electrotechnical Vocabulary - Chapter 411: Rotating machinery Translation
01.040.01
IDT
Umum. Terminologi Standardisasi Dokumentasi Kosa kata
Generalities. Terminology. Standardization. Documentation (Vocabularies)
SNI 7657:2010/Amd1:2011 Singkatan nama kota
Stands for the name of the city
29
SNI 8300:2016
Identity of geothermal wells
11
01.040.03
Identitas sumur panas bumi
Sosiologi. Jasa. Organisasi dan manajemen perusahaan
SNI ISO 9000:2008
Sociology. Services. Company organization and management
Sistem manajemen mutu - dasar-dasar dan kosakata
Quality management systems - Fundamentals and vocabulary
38
Risk management - Vocabulary (ISO Guide 73:2009, IDT)
32
ISO 9000:2005 Quality management systems -- Fundamentals and vocabulary Translation SNI ISO Guide 73:2016
IDT Manajemen risiko - Kosakata (ISO Guide 73:2009, IDT)
ISO Guide 73:2009 IDT
01.040.07
Matematika. Ilmu alam (Kosa kata)
SNI ISO/TS 10867:2011
Mathematics. Natural sciences (Vocabularies)
Nanoteknologi - Karakterisasi tabung nano karbon berdinding tunggal menggunakan spektroskopi fotoluminasi inframerah dekat
Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
25
ISO/TS 10867:2010 Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy Translation SNI ISO/TS 27687:2011
IDT Nanoteknologi - Istilah dan definisi objek nano - Partikel nano, serat nano dan pelat nano
Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate
17
ISO/TS 27687:2008 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate Translation SNI ISO/TS 80004-3:2011
IDT Nanoteknologi - Kosakata - Bagian 3: Objek nano karbon
Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects
17
Nanotechnologies - Vocabulary - Part 1: Core terms
14
Nanotechnology - Vocabulary - Part 8: nano manufacturing process (ISO / TS 80004-8: 2013, IDT)
38
ISO/TS 80004-3:2010 Nanotchnologies - Vocabulary - Part 3: Carbon nano-objects Translation SNI ISO/TS 80004-1:2011
IDT Nanoteknologi - Kosakata - Bagian 1: Istilah utama
ISO/TS 80004-1:2010 Nanotchnologies - Vocabulary - Part 1: Core terms Translation SNI ISO/TS 80004-8:2015
IDT Nanoteknologi - Kosakata - Bagian 8: Proses manufaktur nano (ISO/TS 80004-8:2013, IDT)
ISO / TS 80004-8: 2013 IDT
01.040.19
Pengujian (Kosa kata)
Testing (Vocabularies)
SNI 19-4005-1996
Definisi istilah yang berkaitan dengan uji elektromagnetik
Terms and definitions related to electromagnetic testing
SNI 19-2969-1992
Atmosfir standar untuk pengkondisian dan pengujian, Definisi
Standard atmosphere for conditioning and testing, Definition
SNI 19-3385-1994
Definisi istilah yang berhubungan dengan metode uji mekanis
Definition of terms related to mechanical test method
24
SNI 19-3386-1994
Definisi istilah pada uji lelah dan analisa statistik mengenai data lelah
Definition of tennis for fatique testing and the stastical analysis of fatique data
14
SNI 19-1864-1990
Uji radiografi, Definisi dan istilah
Radiographic testing, Definition and terminology
01.040.21
Sistem mekanika dan komponen untuk penggunaan umum Istilah dan simbol untuk data geometris roda gigi
Gear notation symbols for geometrical data
SNI 05-2297-1991
Membalans (Balancing) - Peristilahan
Balancing - Vocabulary
SNI 05-1197-1989
Bantalan gelinding, Istilah
Rolling bearings, Glossary of terms
Sistem fluida dan komponen untuk penggunaan umum (Kosa kata)
SNI 05-6222-2000
01.040.25
2
6
Mechanical systems and components for general use
SNI 05-3666-1995
01.040.23
9
8 15 5
Fluid systems and components for general use (Vocabularies)
Istilah perpipaan
Piping terminology
Rekayasa manufaktur (Kosa kata)
186
Manufacturing engineering (Vocabularies)
SNI 05-3103-1992
Kontrol numerik mesin - Kosa kata istilah dan definisi media informasi dan pengodean
Numerical control of machines - Terminology and definitions for information media and coding
1
SNI 05-3102-1992
Kontrol numerik mesin - Kosa kata istilah dan definisi pemprograman
Numerical control of machines - Terminology and definition for programming
2
SNI 05-3101-1992
Kontrol numerik mesin - Kosa kata, istilah dan definisi
Numerical control of machines - Terminology and definitions
2
SNI 05-3104-1992
Kontrol numerik mesin - Kosa kata istilah dan definisi komputasi
Numerical control of machines - Terminology and definitions for computation
2
SNI 05-3098-1992
Kontrol numerik mesin - Nomenklatur sumbu dan gerak
Numerical control of machines - Axis and motion nomenclatur
SNI 07-3024-1992
Proses las - Definisi
Welding proceses - Definition
2
SNI 07-3005-1992
Proses lapis listrik dan proses lain yang berhubungan, Istilah umum
Electroplating and related processes, General terms
9
SNI 07-3023-1992
Sifat mampu las - Definisi
Welding ability - Definition
1
SNI 07-2197-1991
Perlakuan permukaan dan pelapisan logam, Klasifikasi istilah umum
Surface treatment and metallic coating, Classification of general terms
4
SNI 05-3106-1992
Kontrol numerik mesin - Kosa kata istilah dan definisi mesin
Numerical control of machines - Terminology and definition for machines
4
SNI 05-3105-1992
Kontrol numerik mesin - Kosa kata istilah dan definisi sistem kontrol
Numerical control of machines - Terminology and definitions for control systems
2
SNI 05-2286-1991
Dais (dies) pembentuk kepala - Istilah
Heading dies - Terminology
6
- 13 -
15
SNI 07-6221-2000
Istilah pengelasan
Welding terminology
154
AWS, American Welding Society MOD SNI 05-6521.1-2001
01.040.27
Gergaji pisau pita pemotong logam - Bagian 1: Definisi dan terminologi
Rekayasa energi dan pemindahan panas (Kosa kata)
Metal cutting band saw blades - Part 1: Definitions and terminology
11
Energy and heat transfer engineering (Vocabularies)
SNI 04-3020-1992
Pemanas air tenaga surya, Definisi, satuan dan lambang, dan klasifikasi. Bagian 1
Solar energy water heater, Definition, units and symbols, and classification. Part 1
SNI 05-3562-1994
Istilah motor bakar gerak bolak-balik
Terminology of reciprocating internal combustion engines
7
SNI 05-3030-1992
Turbin air skala kecil, Istilah penamaan
Mini hydraulic turbines, Standards form
9
SNI 05-6044-1999
Penukar kalor - Terminologi
Heat exchanger - Terminology
01.040.29
Rekayasa listrik (Kosa kata)
SNI 04-6267.603-2002
12
20
Electrical engineering (Vocabularies)
Istilah teknik ketenagalistrikan Bab - 603: Pembangkitan, penyaluran dan pendistribusian tenaga listrik - Perencanaan dan manajemen sistem tenaga listrik
Electric power systems vocabulary - Chapter 603: Generation, transmission and distribution of electricity - Power system planning and management
22
IEC 60050-603: 1986, International Electrotechnical Vocabulary (IEV) - Chapter 603 : Generation, transmission and distribution of electricity - Power system planning and management Translation SNI 04-6267.602-2002
MOD Istilah teknik ketenagalistrikan - Bab 602: Pembangkitan, penyaluran dan pendistribusian tenaga listrik - Pembangkitan
Electric power systems vocabulary - Chapter 602: Generation, transmission and disrtribution of electricity - Generation
17
IEC 60050 (602): 1983, International electrotechnical vocabulary (IEV) - Chapter 602: Generation, transmission and distribution of electricity - Generation Translation SNI 04-6267.601-2002
MOD Istilah teknik ketenagalistrikan - Bab 601: pembangkitan, penyaluran dan pendistribusian tenaga listrik - Umum
Electrotechnical vocabulary - Chapter 601: Generation, transmission and distributionof electricity - General
13
IEC 60050-(601):1985, International electrotechnical vocabulary (IEV) - Chapter 601 : Generation, transmission and distribution of electricity - General Translation SNI 04-6267.303-2002
MOD Istilah teknik ketenagalistrikan - Bab 303: Instrumen ukur elektronik
Electrotechnical vocabulary - Chapter 303: Electronic measuring - Instrument
14
IEC 60303:1983, International Electrotechnical Vocabulary Chapter 303: Electrotechnical measuring instrument Translation
MOD
SNI 04-1930.4-1995
Pedoman bagi peralatan elektromekanik untuk pusat listrik tenaga minihidro (PLTM) - Bagian 4: Definisi, istilah dan lambang
Manual electromechanic equipment for microhydro power plants - Part 5: Definition, vocabulary and symbols
23
SNI 04-6267.605-2000
Istilah teknik ketenagalistrikan - Bab 605: Pembangkit, transmisi dan distribusi listrik - Gardu induk
Electrotechnical vocabulary - Chapter 605: Generation, transmission and distribution of electricity - Substation
18
IEC 50 (605): 1987, International electrotechnical vocabularies (IEV) - Chapter 605: Generation, transmission and distribution of electricity - Substation Translation SNI 04-6267.301-2001
IDT Istilah teknik ketenagalistrikan - Bab 301: Istilah umum pada pengukuran dalam ketenagalistrikan
Electrotechnical vocabulary - Chapter 301: General terms on measurements in electricity
18
IEC 60050:301:1983, Electrotechnical vocabulary - Chapter 301: General terms on measurements in electricity Translation SNI 04-6267.448-2001
MOD Istilah teknik ketenagalistrikan - Bab 448: Pengamanan sistem tenaga
Electrotechnical vocabulary - Chapter 448: Power system protection
31
Electrotechnical vocabulary - Chapter 604: Generation, transmission and distribution of electricity - Operation
29
IEC 60050 (448): 1995, Electrotechnical vocabulary - Chapter 448: Power system protection Translation SNI 04-6267.604-2000
IDT Istilah teknik ketenagalistrikan - Bab 604: Pembangkitan, penyaluran dan pendistribusian tenaga listrik - Pengusahaan
IEC 50 (604): 1987, International electrotechnical vocabularies (IEV) - Chapter 604: Generation, transmission and distribution of electricity - Operation Translation SNI 04-6267.131.1-2001
IDT Istilah teknik ketenagalistrikan - Bab 131: Sirkit listrik dan magnetik - Seksi 1: Umum
Electrotechnical vocabulary - Chapter 131: Electric and magnetic circuit - Section 1: General
25
IEC 50 (131): 1978, Electrotechnical vocabulary - Chapter 131: Electric and magnetic circuit - Section 1: General Translation SNI 04-6267.302-2001
IDT Istilah teknik ketenagalistrikan - Bab 302: Instrumen ukur listrik
Electrotechnical vocabulary - Chapter 302: Electrical measuring instruments
14
Electrotechnical vocabulary - Chapter 321: Instrument transformer
13
IEC 60050 (302): 1983, Electrotechnical vocabulary - Chapter 302: Electrical measuring instruments Translation SNI 04-6267.321-2001
IDT Istilah teknik ketenagalistrikan - Bab 321: Tranformator instrumen
IEC 60050 (321): 1996, Electrotechnical vocabulary - Chapter 321: Instrument transformers Translation SNI IEC 60550-441:2010
IDT Istilah Teknik Ketenagalistrikan - Bagian 441: Perlengkapan Hubung-Bagi, Perlengkapan Kendali dan Sekring
International Electrotechnical Vocabulary. Switchgear, controlgear and fuses
IEC 60050-441 ed 2.0 (1984-01) + am1 ed 2.0 (2000-07) Translation SNI IEC 60050-421:2009
IDT Kosakata Elektroteknis - Bagian 421: Transformator daya dan reaktor
International Electrotechnical Vocabulary. Chapter 421: Power transformers and reactors
28
IEC 60050-421:2009, International Electrotechnical Vocabulary. Chapter 421: Power transformers and reactors Translation SNI 04-6970.1-2003
IDT Material isolasi keramik dan gelas - Bagian 1: Definisi dan Kkasifikasi
Ceramic and glass insulating materials - Part 1: Definitions and classification
16
International electrotechnical vocabulary - Part 446: Electrical relays
25
International electronic vocabulary - Part 466: The airways
52
IEC 60672-1: 1995-06, Ceramic and glass insulating materials - Part 1 : Definitions and classification Translation SNI 04-6267.446-2003
IDT Istilah teknik ketenagalistrikan - Bagian 446: Relai listrik
IEC 60050-446 (1983-01), International Electrotechnical Vocabulary (IEV) - Chapter 446 : Electrical relays IDT SNI IEC 60050-466:2015
Kosakata elektronik internasional - Bagian 466: Saluran udara (IEC 60050466:1990, IDT)
IEC 60050-466:1990 IDT SNI IEC 60050-826:2011
Kosakata Elektroteknis Internasional – Bagian 826: Instalasi Listrik
International Electrotechnical Vocabulary - Part 826: Electrical installations
IEC 60050-826 (2004) Translation SNI IEC 60050-471:2012
IDT Kosakata Elektroteknik Nasional Berdasarkan Kosakata Elektroteknik International - Bagian 471: Isolator
International Electrotechnical Vocabulary - Part 471: Insulators
IEC 60050-471:2007 IDT
IDT
- 14 -
SNI IEC 60050-845:2016
Kosakata elektroteknik internasional - Bagian 845: Pencahayaan (IEC 60050845:1987, IDT)
International Electrotechnical Vocabulary – Part 845: Lighting (IEC 60050-845:1987, IDT)
140
IEC 60050-845:1987 IDT SNI 04-6913.1-2002
Catu-daya stabil, keluaran a.s. - Bagian 1: Istilah dan definisi
Stabilized power supplies, d.c. output - Part 1: Terms and definitions
32
IEC 478-1: 1974, Stabilized power supplies, d.c. output - Part 1: Terms and definitions Translation
01.040.33
MOD
Telekomunikasi (Kosa kata)
Telecommunications (Vocabularies)
SNI 04-2001-1990
Jaringan kabel telepon, Istilah
Telephone cable network, Terminology
20
SNI 04-6709.2-2004
Peralatan dan sistem audiovisual, video dan televisi - Bagian 2: Definisi istilah umum
Audiovisual, video and television equipment and systems - Part 2: Definition of general terms
19
IEC 574-2 Translation
01.040.35
IDT
Teknologi informasi. Peralatan kantor (Kosa kata)
SNI ISO/TS 19104:2011
Information technology. Office equipment (Vocabularies)
Informasi geografis - Terminologi
Geographic information - Terminology
ISO/TS 19104:2008, Geographic information - Terminology Translation SNI ISO/TS 19104:2011
IDT Informasi geografis - Terminologi (ISO/TS 19104:2008, IDT)
Geographic information - Terminology (ISO / TS 19104: 2008, IDT)
111
ISO/TS 19104:2008 IDT
01.040.43
Rekayasa kendaraan jalan raya (Kosa kata)
Road vehicle engineering (Vocabularies)
SNI 09-2759-1992
Kendaraan bermotor, Penjelasan mengenai istilah berat
Motor vehicles, Explanation on term of heavy
SNI 09-1246-2002
Istilah-istilah rem kendaraan bermotor roda empat atau lebih kereta gandeng dan tempelannya
Glosary of terms for brakes for automobiles, towing vehicles and trailers
33
SNI 09-1640-2002
Definisi dan istilah kendaraan bermotor beroda kurang dari empat
Terms and definition of road vehicles of less than four wheels motor vehicles
16
SNI 09-1408-1989
Perangkat gas buang kendaraan bermotor, Istilah
Exhaust gases equipment for motor vehicles, Terms
5
SNI 09-1405-1989
Kendaraan bermotor, Definisi dan istilah ukuran bagian
Motor vehicles, Definition and terms of part dimensions
6
01.040.45
Rekayasa perkeretaapian (Kosa kata)
SNI 11-1078-1989
01.040.47
5
Railway engineering (Vocabularies)
Kereta api, Istilah umum
Railway, Glossary of terminology
Bangunan kapal dan Konstruksi kapal (Kosa kata)
15
Shipbuilding and marine structures (Vocabularies)
SNI 10-4921-1998
Istilah dan definisi daya dari mesin pendorong yang dipasang di kapal
Terminology and definition of output of propulsion machinery installed in ships
4
SNI 10-4923-1998
Istilah tekanan yang digunakan untuk marin
Terminology of pressure used in ships
2
SNI 10-0750-1989
Peralatan navigasi dan komunikasi kapal, Istilah
Shipbuilding, navigation and communication instruments. Glossary of terms
SNI 10-0747-1989
Peralatan dan perlengkapan kapal, Istilah
Shipbuilding, auxiliary machinery and equipments. Glossary of terms
SNI 10-0749-1989
Peralatan dan perlengkapan listrik kapal, Istilah
Shipbuilding, electric parts. Glossary of terms
SNI 10-0746-1989
Perkapalan, Istilah umum
Shipbuilding, General terms
01.040.53
Peralatan penanganan bahan (Kosa kata)
SNI 05-1370-1989
01.040.55
01.040.59
3 11
Materials handling equipment (Vocabularies)
Mesin kran swagerak, Daftar istilah
Mobile cranes, Glossary
Pengemasan dan distribusi barang (Kosa kata)
SNI 19-3792-1995
3 12
18
Packaging and distribution of goods (Vocabularies)
Istilah umum peti kemas
General terminology for containers
Teknologi tekstil dan kulit (Kosa kata)
22
Textile and leather technology (Vocabularies)
SNI 08-3809-1995
Definisi dan istilah tekstil kerajinan tenun lurik
Definitions and terms for striped woven handicraft textile
1
SNI 08-3317-1994
Mesin pemintalan, Definisi sisi mesin
Spinning machinery, Definition of machine side
2
SNI 08-4338-1996
Istilah dan definisi persuteraan (riling)
Terms and definition of matters pertaining of silk
2
SNI 08-3321-1994
Mesin pencelupan dan penyempurnaan. Definisi sisi
Dyeing and finishing machines, Definition of left and right side
2
SNI 08-4336-1996
Istilah dan definisi benang tekstur
Terms and definition of texture yarn
2
SNI 08-4337-1996
Istilah dan definisi geotekstil
Terms and definition of geotextiles
2
SNI 08-4624-1998
Istilah cacat kain yang tampak setelah proses pencelupan, pencapan atau penyempurnaan
Vocabulary for fabric defects after dyeing, marking or finishing
5
SNI 08-4908-1998
Istilah dan definisi jahitan pada kampuh barang jadi tekstil
Terms and definition of sewing on seams of textile finished products
8
SNI 08-4981-1999
Istilah dan definisi yang berhubungan dengan sifat bakar pada bahan tekstil
Terms and definitions related to the burning behavior of textiles
2
SNI 08-7034-2004
Istilah dan definisi yang berhubungan dengan kekuatan dan sifat-sifat (properties) tekstil
Terminology and definitions related to strength and properties of textiles
8
SNI 0239:2014
Batik - Pengertian dan istilah
Batik - Definition and terms
SNI 8184:2015
Tiruan batik dan paduan tiruan batik dengan batik - Pengertian dan istilah
Alloy artificial imitation batik and batik with batik - Definition and terms
SNI 08-0891-1989
Kain tenun, Istilah dan definisi cacat
Woven fabric defects, Terms and definitions
SNI 08-1272-1989
Tekstil, Istilah dan definisi dalam penyempurnaan
Textile, Terms and definitions of finishing.
SNI 08-0239-1989
Istilah batik
Terminology of batik
4
SNI 08-0246-1989
Definisi procede batik
Definition of batik procede
1
SNI 08-0240-1989
Definisi isen batik
Definition of batik motif
4
SNI 06-0391-1989
Kulit dan cara pengolahannya, Istilah dan definisi
Leather and its processing methods, Terms and definitions
SNI 08-0247-1989
Definisi dan penggolongan pola batik
Definition and classification of batik pattern
01.040.61
Industri pakaian (Kosa kata) Istilah dan definisi untuk bagian-bagian serta cara pembuatan sepatu
Terms and definition for parts and method of manufacturing of shoes
SNI 12-1762-1990
Sepatu, Sepatu klasifikasi/penggolongan istilah dan definisi
Shoes, Classification, terms and definitions
Pertanian (Kosa kata)
SNI 02-3156-1992
5 12
11 4
Clothing industy (Vocabularies)
SNI 12-0392-1989
01.040.65
12
12 3
Agriculture (Vocabularies)
Isitlah-istilah untuk traktor pertanian dan alat mesin pertanian pra-panen
- 15 -
Tractor and pre - harvest agricultural machinery, Terminology
2
SNI 01-5010.4-2002
Pendukung di bidang kehutanan - Bagian 4: Tata nama hasil hutan
Supporting on forestry field - Part 4: Nomenclature of forest product
24
SNI 01-5006.7-2002
Tanaman kehutanan - Bagian 7: Istilah dan definisi yang berhubungan dengan perbenihan dan pembibitan tanaman kehutanan
Forestry plants - Part 7: Terminology and definition related to germination and seedling of forestry plants
24
SNI 19-5009.7-2001
Istilah dan definisi yang berkaitan dengan pengusahaan taman buru berasaskan pemanfaatan secara lestari
Terms and definitions related to hunter zone business based on sustainable exploitation
13
SNI 19-5009.5-2001
Istilah dan definisi yang berkaitan dengan pengusahaan pariwisata alam berasaskan konservasi hayati
Terms and definition related to nature tourism business based on bio-conservation
10
SNI 19-5005-1999
Istilah dan definisi yang berhubungan dengan sertifikasi pengelolaan hutan produksi lestari
Terms and definitions related to certification of sustainable production forest management
SNI 19-5009.9-2001
Istilah dan definisi yang berkaitan dengan penangkaran satwa liar berasaskan konservasi hayati
Terms and definitions related to wild animals breeding based on bio-conservation
11
SNI 7277.2:2008
Istilah dan definisi - Bagian 2: Kapal perikanan
Terms and definition - Part 2: Fishery boats or ships
13
SNI 7277.3:2008
Istilah dan definisi - Bagian 3: Jaring lingkar
Terms and definition - Part 3: Round nets
8
SNI 7277.4:2008
Istilah dan definisi - Bagian 4: Pancing
Terms and definition - Part 4: Fishing rods
10
SNI 7277.5:2008
Istilah dan definisi - Bagian 5:Pukat hela (trawl)
Terms and definition - Part 5: Rigger trawls
10
SNI 7277.7:2008
Istilah dan definisi - Bagian 7:Penggaruk
Terms and definition - Part 7 :
8
SNI 7277.9:2008
Istilah dan definisi - Bagian 9: Jaring angkat
Terms and definition - Part Lifting nets
8
SNI 7277.10:2008
Istilah dan definisi - Bagian 10: Alat perangkap ikan
Terms and definition - Part 10: Fish net tools
9
SNI 7277.11:2008
Istilah dan definisi - Bagian 11: Alat penangkap ikan pengait/penjepit dan melukai
Terms and definition - Part 11: Hook/clamp and lance fish net tools
8
SNI 7277.1:2008
Istilah dan definisi - Bagian 1: Sarana penangkapan ikan
ters and definition - Part 1: Tools for fish hunting
SNI 7277.13:2008
Istilah dan definisi - Bagian 13: Alat bantu penangkapan ikan
Terms and definition - Part 13: Ard tools for hunting fish
SNI 7277.6:2008
Istilah dan definisi - Bagian 6: Pukat tarik
Terms and definition - Part 6: Dragging trawls
9
SNI 7277.14:2008
Istilah dan definisi - Bagian 14: Keselamatan kapal perikanan
Terms and definition - Part 14: Safety for fishery ships/boats
8
SNI 7277.12:2008
Istilah dan definisi - Bagian 12: Alat penangkap yang dijatuhkan/ditebarkan
Terms and definition - Part 12: Spread fish net tools
8
SNI 7277.8:2008
Istilah dan definisi - Bagian 8: Jaring insang
Terms and definition - Part 8: Lifting nets
SNI 5010.5:2016
Pendukung di bidang kehutanan - Bagian 5: Nama kayu perdagangan
Supporting in forestry - Part 5: Name timber trade
SNI 02-6679-2002
Pengelompokan dan terminologi bahan penyubur tanaman
Classification and terminology of fertilizer
SNI 08-0623-1989
Istilah dan definisi jaring
Terms and definitions of nets
01.040.73
Pertambangan dan mineral (Kosa kata)
5
7 16
12 202 15 5
Mining and minerals (Vocabularies)
SNI 13-6340.3-2000
Istilah sosio-ekonomi tambang - Bagian C: Pengembangan masyarakat dan wilayah pertambangan
Terms of socio-economic of mining - Part C: Development of society and mining zone
4
SNI 13-6339.1-2000
Istilah keselamatan dan kesehatan kerja tambang - Bagian A: Keselamatan kerja tambang
Terms of occupational safety and health of mining - Part A: Occupational safety of mining
4
SNI 13-6339.2-2000
Istilah keselamatan dan kesehatan kerja tambang - Bagian B: Kesehatan kerja tambang
Terms of occupational safety and health - Part B: Occupational health of mining
4
SNI 13-6338-2000
Istilah kebijakan dan hukum pertambangan
Terms of mining policy and law
4
SNI 13-6339.7.2-2000
Istilah uji logam, mineral, dan batubara - Bagian G: Pengujian baku lingkungan - Sub bagian 2: Uji udara
Terms of metals, mineral, and coal testing - Part G: Testing of environmental standard Section 2: Air testing
4
SNI 13-6339.4.2-2001
Istilah uji logam, mineral dan batubara - Bagian D: Pengujian mineral dan logam secara kimia - Sub bagian 2: Metode volumetri
Terms of metals, minerals and coal testing - Part D: Chemical testing of minerals and metals - Section 2: Volumetric methods
SNI 13-4725.7-2001
Istilah teknik pengolahan bahan galian - Bagian G: Pemurnian logam nonbesi
Technical terms of mines processing - Part G: Non-ferrous metals
6
SNI 13-6339.5-2000
Istilah komoditas mineral dan batubara - Bagian E: Produk turunan/derivatif mineral
Terms of mineral and coal commodities - Part E: Mineral derivative products
5
SNI 13-4723.6-1998
Istilah teknik eksplorasi bahan galian Bagian 6: Evaluasi cadangan
Technical terms of mine exploration Part 6: Reserve evaluation
1
SNI 13-4723.2-1998
Istilah teknik explorasi bahan Bagian 2: Eksplorasi geofisika
Technical terms of mine exploration Part 2: Geophysical exploration
1
SNI 13-4725.6-2001
Istilah teknik pengolahan bahan galian - Bagian F: Pengolahan cara peleburan
Technical terms of mine processing - Part F: Smelting method processing
8
SNI 13-6339.3-2000
Istilah komoditas mineral dan batubara - Bagian C: Logam besi dan paduan
Terms of mineral and coal commodities - Part C: Ferrous metals and alloys
3
SNI 13-4723.1-1998
Istilah teknik eksplorasi bahan galian. Bagian 1 : Pemetaan
Technical terms of mine exploration Part 1: Mapping
6
SNI 13-4723.3-1998
Istilah teknik eksplorasi bahan galian Bagian 3 : Eksplorasi geokimia
Technical terms of mine exploration Part 3 : Geochemical exploration
1
SNI 13-4723.5-1998
Istilah teknik eksplorasi bahan galian. Bagian 5 : Pemercontoh
Technical terms of mines exploration. Part 5 : Sampling
SNI 13-6339.4.1-2001
Istilah uji logam, mineral dan batubara - Bagian D: Pengujian mineral dan logam secara kimia - Sub bagian 1: Metode gravimetri
Terms of metals, minerals and coal testing - Part D: Chemical testing of minerals and metals - Section 1: Gravimetric methods
SNI 13-4723.7-2001
Istilah teknik eksplorasi bahan galian - Bagian G: Penginderaan jauh
Technical terms of mine exploration - Part G: Remote sensing
SNI 13-4723.8-2001
Istilah teknik eksplorasi bahan galian - Bagian H: Geostatistika
Technical terms of mines exploration - Part H: Geostatistic
SNI 13-4724.1-1998
Istilah teknik penambangan Bagian 1: Sistem dan metode penambangan
Technical terms of mining Part 1: Systems and methods of mining
2
SNI 13-4724.2-1998
Istilah teknik penambangan Bagian 2: Persiapan penambangan
Technical terms of mining Part 2: Preparation of mining
3
SNI 13-4724.8-2001
Istilah teknik penambangan - Bagian H: Penganginan
Technical terms of mining - Part H: Ventilation
9
SNI 13-4725.1-1998
Istilah teknik pengolahan bahan galian Bagian 1: Persiapan pengolahan
Technical terms of mine processing Part 1: Preparation of processing
3
SNI 13-6339.6-2001
Istilah uji logam, mineral dan batubara - Bagian F: Pengujian petrografi batubara
Terms of metal, mineral and testing - Part F: Coal petrography testing
5
SNI 13-6339.5-2001
Istilah uji logam, mineral dan batubara - Bagian 5: Pengujian batubara dan kokas
Coal, mineral and metal test terminology - Part 5: Coke and coal testing
7
SNI 13-4724.7-2001
Istilah teknik penambangan - Bagian G: Penyaliran
Mining technical vocabulary - Part G: Drainage
6
SNI 13-4723.4-1998
Istilah teknik eksplorasi bahan galian Bagian 4: Pemboran
Technical terms of mine exploration Part 4: Drilling
1
SNI 13-6339.6-2000
Istilah komoditas mineral dan batubara - Bagian F: Batu mulia
Terms of mineral and coal commodities - Part F: Precious stones
3
- 16 -
15
1 14 7 17
SNI 13-6339.7.4-2000
Istilah uji logam, mineral, dan batubara - Bagian G: Pengujian baku lingkungan - Sub bagian 4: Uji hayati
Terms of metals, mineral, and coal testing - Part G : Testing of environmental standard Section 4: Biological testing
5
SNI 13-6340.2-2000
Istilah sosio-ekonomi tambang - Bagian B: Studi kelayakan tambang
Terms of socio-economic of mining - Part B: Feasibility study of mining
5
SNI 13-6538-2001
Istilah ekonomi mineral
Terms of mineral economics
8
SNI 13-6537-2001
Istilah lingkungan hidup pertambangan
Terms of mining environment
9
SNI 7567:2010
Glosarium Pemercontohan
Glossary of sampling
SNI 13-7169-2006
Istilah dan definisi lingkungan hidup pertambangan
Terminology and definitions of mining environment
SNI 7568:2010
Glosarium eksplorasi mineral dan batubara
Glossary of mineral and coal exploration
SNI 7571:2010
Baku tingkat getaran peledakan pada kegiatan tambang terbuka terhadap bangunan
Raw blasting vibration levels at the mine activities are open to building
01.040.77
Metalurgi (Kosa kata)
16
Metallurgy (Vocabularies)
SNI 07-3626-1994
Definisi istilah yang berkaitan dengan perlakuan panas logam
Terms of definition related to heat treatment of metals
SNI 07-1346-1989
Partikel maknit, Definisi dan istilah uji
Magnetic particles, Definition and terminology of test
7
SNI 07-1336-1989
Cara uji, definisi dan istilah partikel elektromaknit
Test method, definition and terminology of electromagnetic particles
9
SNI 07-1340-1989
Istilah yang digunakan dalam proses perlakuan panas logam
Glossary of terms for heat treatment process of metals
6
01.040.79
Teknologi kayu (Kosa kata)
20
Wood technology (Vocabularies)
SNI 05-2318-1991
Mesin ketam pengatur ketebalan satu permukaan untuk pengerjaan kayu, Daftar istilah
Thickness planing machines with rotary cutterblock for one side dressing for woodworking, Nomenclature
SNI 01-6075-1999
Istilah dan definisi pada perekatan kayu dan produk kayu
Terms and definitions of wood and wood products adhesives
SNI 05-2320-1991
Daftar istilah komponen mesin ketam dan pengatur ketebalan untuk pengerjaan kayu
Nomenclatures for thickness measurement and planing machines component for wood working
6
SNI ISO 2074:2008
Kayu lapis - Istilah dan definisi (Plywood- Vocabulary (ISO 2074:2007, IDT)
Plywood - Vocabulary
9
6 13
ISO 2074:2007 Plywood- Vocabulary Translation SNI 7835.1:2012
01.040.85
Nomenclature of paper and board in Indonesia - Part 3
3
Construction materials and building (Vocabularies)
Definisi, istilah lift dan eskalator
Definition, terms of lifts and escalator
Rumah tangga. Hiburan. Olah raga. (Kosa kata)
SNI 12-4349-1996
01.060
Paper technology (Vocabularies)
Tata nama kertas dan karton di Indonesia - Bagian 3
Bahan konstruksi dan bangunan (Kosa kata)
SNI 05-2189-1999
01.040.97
Wood chip - Part 1: Term and definition
Teknologi kertas (Kosa kata)
SNI 14-0581.3-2000
01.040.91
IDT Serpih kayu (wood chip) - Bagian 1: Istilah dan definisi
14
Housekeeping. Entertainment. Sports (Vocabularies)
Istilah alat kebugaran jasmani
Terms of physical fitness equipment
6
Quantities and units
Besaran dan satuan
SNI 19-2744-1992
Besaran dan satuan panas
Quantities and units of heat
12
SNI 19-2743-1992
Besaran dan satuan kimia fisika dan fisika molekul
Quantities and units of physical chemistry and molecular physics
16
SNI 19-3521-1994
Besaran dan satuan periode dan fenomena yang berhubungan
Quantities and units for periodic and related phenomena
SNI 19-2745-1992
Kuantita, satuan dan lambang, Ketentuan umum
Quantities, units and symbols, General principles
SNI 19-2746-1992
Satuan sistem internasional
International system of units
10
SNI 19-3515-1994
Besaran dan satuan ruang dan waktu
Quantities and units for space and time
12
SNI 19-3514-1994
Besaran dan satuan mekanika
Quantities and unit of mechanics
17
SNI 19-3213-1992
Satuan metrik yang digunakan dalam konstruksi
Metric units used in building construction
SNI 19-2055-1990
Besaran dan satuan fisika untuk zat padat
Quantities and units for solid state physics
SNI 19-2056-1990
Parameter tanpa dimensi
Dimensionless parameters
SNI 05-2057-1990
Toleransi/dimensi - Perubahan satuan dari inci ke milimeter atau sebaliknya
Toleranced dimensions and conversion from inches into millimetres and vice versa
SNI ISO 80000-2:2015
Besaran dan satuan - Bagian 2: Tanda dan lambing matematik untuk digunakan dalam ilmu pengetahuan alam dan teknologi (ISO 80000-2:2009, IDT)
Magnitude and units - Part 2: Signs and mathematical symbol for use in natural science and technology (ISO 80000-2:2009, IDT)
49
Magnitude and units - Part 1: General (ISO 80000-1:2009 dan ISO 800001:2009/Cor1:2011, IDT)
54
Magnitude and units - Part 11: Numbers characteristics (ISO 80000-11:2009, IDT)
20
3 7
9 17 6 7
ISO 80000-2:2009 IDT SNI ISO 80000-1:2015
Besaran dan satuan - Bagian 1: Umum (ISO 80000-1:2009 dan ISO 800001:2009/Cor1:2011, IDT)
ISO 80000-1:2009 dan ISO 80000-1:2009/Cor1:2011 IDT SNI ISO 80000-11:2015
Besaran dan satuan - Bagian 11: Bilangan karakteristik (ISO 80000-11:2009, IDT)
ISO 80000-11:2009 IDT SNI 19-1940-1990
Besaran dan satuan reaksi inti dan radiasi pengion
Quantities and units of nuclear reaction and ionizing radiation
28
SNI 19-1939-1990
Faktor-faktor konversi
Conversion factors
52
SNI 19-1941-2001
Tanda dan lambang matematis untuk ilmu pengetahuan alam/fisika dan teknologi
Mathematical sign and symbols for use in the technology
25
ISO 31-11: 1992, Quantities and units - Part 11: Mathematical signs and symbols for use in the physical science and technology Translation SNI 19-1943-2001
IDT Besaran dan satuan radiasi cahaya dan elektromagnetik sejenis
Quantities and units for light and related electromagnetic radiations
23
ISO 31-6: 1992, Quantities and units - Part 6: Light and related electromagnetic radiations Translation
MOD
SNI 19-1942-1990
Besaran dan satuan listrik dan magnit
Quantities and units of electricity and magnetism
34
SNI 19-1944-2001
Besaran dan satuan akustika
Quantities and units of acoustics
19
ISO 31-7: 1992, Quantities and units - Part 7 Acoustics Translation
IDT
- 17 -
SNI 19-1947-1990
01.070
Satuan metrik yang digunakan dalam penyediaan air, tata saluran riol dan drainase (termasuk pemompaan)
11
Colour coding
Kode warna
SNI 04-7024-2004
Metric unit used in water supply, seserage and drainage (includes pumping)
Kode untuk penandaan warna
Codes for designation of colours
6
IEC 60757: 1983 Translation
01.080
IDT
Graphical symbols
Simbol grafis
01.080.10
Simbol grafis umum
Public information symbols
SNI 19-1610-1989
Lambang grafis - Fungsi dan instrumentasi untuk alat pengatur dan pengukur proses - Bagian 1: Keperluan dasar
Graphical symbols Function and instrumentation for process control devices Part 1: Basic requirements
19
SNI 19-1611-1989
Lambang grafis - Komponen dan sistem instalasi aliran fluida
Graphical symbol Component and fluid flow installation system
26
01.080.20
Simbol grafis yang digunakan pada peralatan khusus
Graphical symbols for use on specific equipment
SNI 05-4555-1998
Lambang petunjuk pada mesin/ peralatan
Graphical symbols for machinery/equipment
SNI 19-4003-1996
Standar pengujian diagram fase
Standard practice for presentation of phase diagram
SNI 10-6031-1999
Simbol grafis radas listrik untuk gambar perekayasaan di bidang marin, komunikasi, instrumentasi, navigasi dan radio
Graphical symbols for electrical apparatus for marine use engineering drawing communication, instrumentation, navigation and radio
47
SNI 10-6033-1999
Simbol grafis radas listrik (daya) untuk gambar perekayasaan di bidang marin
Graphical symbols for electrical apparatus (power) for marine engineering drawings
37
SNI 19-6786-2002
Spesifikasi simbol gambar sistem penyediaan air dan sistem drainase di dalam tanah
Graphical symbols for water supply and drainage system in the ground
10
SNI 10-0970-1989
Sistem ventilasi kapal, Simbol gambar
Ships' ventilation system, Graphical symbols
4
SNI 10-0971-1989
Alat keselamatan kebakaran di kapal, Simbol gambar
Fire safety appliances in ships, Graphical symbols
3
01.080.30
Simbol grafis yang digunakan dalam gambar teknik
6 5
Graphical symbols for use on technical drawings
SNI 04-2002-1990
Jaringan kabel telepon, Lambang grafis
Telephone cable network, Graphical symbols
14
SNI 13-6576-2001
Simbol grafis untuk peralatan pabrik preparasi batu bara
Graphical symbols for coal preparation plant
18
01.080.40
Simbol grafis yang digunakan dalam gambar rekayasa kelistrikan dan elektronik, diagram, chart dalam dokumen produk teknik yang berkaitan
Graphical symbols for use on electrical and electronics engineering drawings, diagram, charts and in relevant technical product documentation
SNI 19-6659-2002
Tanda keselamatan - Pemanfaat listrik
Safety marking - Electrical usages
SNI 10-4924-1998
Simbol grafis radas listrik untuk pemakaian di bidang marin - Gambar perekayasaan - Perangkat penerangan dan perlengkapannya
Graphical symbols for electrical apparatus for marine use - Engineering drawings - Lighting fittings and accessories
25
SNI IEC/TR 62687:2013
Lambang grafis untuk digunakan pada perlengkapan - Peristilahan
Graphical symbols for use on equipment - Terminology
11
7
IEC/TR 62687:2011 Translation
01.100 01.100.01
IDT
Technical drawings
Gambar teknik Gambar teknik secara umum
Technical drawings in general
SNI 05-2754-1992
Gambar teknik - Azas penyajian umum
Technical drawings - General principles of presentation
SNI 05-2645-1992
Gambar teknik - Daftar bagian
Technical drawings - Item lists
SNI 05-2753-1992
Gambar teknik - Huruf - Karakter yang digunakan
Technical drawings - Lettering - Characters used
SNI 05-2644-1992
Gambar teknik - Simbol untuk toleransi geometrik proporsi dan dimensi
Technical drawings - Symbols for proportional and dimensional geometrical tolerances
SNI 05-2755-1992
Gambar teknik - Daftar proses las, patri - Las - patri dan solder logam untuk penyajian lambang pada gambar
Technical drawings - List of welding and soldering processes. Welding, brazing and solders of metals for representation of symbol on drawing
4
SNI 05-2643-1992
Gambar teknik - Huruf Bagian 4 : Karakter Cyrylic
Technical drawings - Lettering Part 4 : Cyrylic characters
5
SNI 05-2296-1991
Gambar teknik - Lambang penggambaran diagram kinematik - Bag.IV
Technical drawings - Graphical symbols for kinematic diagrams. Part IV
7
SNI 05-2936-1992
Gambar teknik - Penomoran elemen
Technical drawings - Element numbering
SNI 05-2937-1992
Gambar teknik - Penulisan toleransi linear dan sudut
Technical drawings - Linear and angular tolerance
SNI 05-2646-1992
Gambar teknik - Etiket gambar
Technical drawings - Drawing etiquete
4
SNI 05-2751-1992
Gambar teknik - Skala
Technical drawings - Scales
2
SNI 05-2642-1992
Gambar teknik - Huruf Bagian 2 : Karakter Greek
Technical drawings - Lettering Part 2 : Greek characters
SNI 05-3516-1994
Gambar teknik - Metode pembubuhan simbol pola tekstur permukaan
Technical drawings - Method of indicating surface texture on drawings
SNI 05-3022-1992
Gambar teknik - Penunjukan bagian
Technical drawings - Item references
SNI 05-2961-1992
Gambar teknik - Penulisan ukuran
Technical drawings - Sizing
12
SNI 05-1824-1990
Gambar teknik - Toleransi geometris acuan dan sistem acuan untuk toleransi geometris
Technical drawings - Geometrical tolerancing datums and datum systems for geometrical tolerances
15
SNI 05-1821-1990
Gambar teknik - Toleransi bentuk dan posisi. Hal-hal umum lambang dan penulisan pada gambar
Techncial drawings - Tolerances of form and of position. Generalities on symbols and lettering on drawings
26
SNI 05-1492-1989
Gambar teknik - Penulisan lambang lasan pada gambar
Technical drawings - Welding symbols on drawing
27
SNI 05-1822-1990
Gambar teknik - Toleransi bentuk dan posisi. Pemberian ukuran dan toleransi profil
Technical drawings - Tolerances of form and of position. Dimensioning and tolerancing of profiles
4
SNI 05-1820-1990
Gambar teknik - Pemberian ukuran dan toleransi pada kerucut
Technical drawings - Dimensioning and tolerancing on cones
9
SNI 05-1823-1990
Gambar teknik - Toleransi bentuk dan posisi - Prinsip material maksimum
Technical drawings - Tolerances of form and of position - Maximum material principles
8
SNI 05-1495-1989
Gambar teknik - Lambang penggambaran diagram kinematik Bagian II
Technical drawings - Graphical symbols for kinematic diagrams. Part II
9
SNI 05-1496-1989
Gambar teknik - Lambang penggambaran diagram kinematik Bagian III
Technical drawings - Graphical symbols for kinematic diagrams. Part III
SNI 05-1608-1989
Gambar teknik - Konstruksi baja
Technical drawing - Steel construction
13
SNI 05-1493-1989
Gambar teknik - Lambang penggambaran teknologi vakum
Technical drawings - Vacuum technology graphical symbols
10
SNI 05-1494-1989
Gambar teknik - Lambang penggambaran diagram kinematik Bagian I
Technical drawings - Graphical symbols for kinematic diagrams. Part I
- 18 -
19 2 9 11
7 13 3
6
9
01.100.20
Gambar teknik mesin
Mechanical engineering drawings
SNI 05-2750-1992
Gambar teknik - Roda gigi
Technical drawings - Gears
7
SNI 05-2747-1992
Gambar teknik - Bagian berulir
Technical drawings - Threaded parts
4
SNI 05-2749-1992
Gambar teknik - Pegas
Technical drawings - Springs
5
SNI 05-2748-1992
Gambar teknik - Lubang senter
Technical drawings - Center holes
4
SNI 05-3048-1992
Gambar teknik - Instalasi - Simbol grafik untuk kontrol otomatis
Technical drawing - Installation - Graphical symbols for automatic control
8
01.110
Technical product documentation
Dokumentasi produk teknik
SNI 19-6648-2002
Dokumentasi - Penyajian tesis dan dokumen sejenis
Documentation - Presentation of theses and similar documents
6
Documentation - Presentation of scientific and technical reports
36
ISO 7144 - 1986, Documentation- Presentation of theses and similar documents Translation SNI 19-6651-2002
MOD Dokumentasi - Penyajian laporan ilmiah dan teknis
ISO 5966:1982, Documentation - Presentation of scientific and technical reports Translation
01.140
MOD
Information sciences. Publishing
Ilmu informasi. Penerbitan
01.140.20
Ilmu informasi
Information sciences
SNI 19-4190-1996
Rujukan karya tulis
Bibliographical references
SNI 19-4192-2002
Dokumentasi - Abstrak untuk dokumentasi dan publikasi
Documentation - Abstracts for documentation and publication
SNI 7596:2010
Perpustakaan desa/kelurahan
Library Village
SNI 19-6962.1-2003
Dokumentasi dan informasi - Manajemen rekaman - Bagian 1: Umum
Documentation and information - Record management - Part 1: General
27
Information and documentation - International standard serial number (ISSN)
26
8 12
ISO 15489-1: 2001 Translation SNI ISO 3297:2010
MOD Informasi dan dokumentasi - International standard serial number (ISSN)
ISO 3297:2007 Information and documentation - International standard serial number (ISSN) Translation
IDT
SNI 7496:2009
Perpustakaan khusus instansi pemerintah
Special library for government institution
SNI 7329:2009
Perpustakaan sekolah
School libraries
SNI 7495:2009
Perpustakaan umum kabupaten/kota
Public library for distric area
SNI 7330:2009
Perpustakaan perguruan tinggi
University libraries
SNI 7712:2012
Perpustakaan keliling kabupaten / kota
Mobile library for regency / city
SNI ISO 215:2014
Dokumentasi - Penyajian artikel pada terbitan berkala dan berseri lainnya
Documentation - Presentation of contributions to periodicals and other serials
22
ISO 215:1986 IDT SNI ISO 11108:2014
Informasi dan dokumentasi - Kertas arsip - Persyaratan permanensi dan durabilitas (ISO 11108:1996, IDT)
Information and documentation - Archival Paper - Requirements for permanence and durability
ISO 11108:1996 IDT SNI 19-1935-1990
Penentuan tajuk entri
Main entry (cataloguing rules)
27
SNI 19-1949-1990
Deskripsi untuk monografi
Description for monography
28
SNI 19-1948-1990
Tajuk entri dan deskripsi bahan bukan buku, Penentuan
Main entry and description of non book materials, (Cataloguing rules)
26
SNI 19-1937-1990
Halaman judul buku
The title page of the book
3
SNI 19-1938-1990
Lembar data bibliografi laporan
Bibliographic data sheet for reports
6
SNI 19-1936-1990
Judul terbitan berseri, Patokan penyingkatan
Titles of periodicals, Rules for abbreviations
5
SNI 19-1950-1990
Terbitan berkala
Presentation of periodicals
9
SNI 19-1946-1990
Indeks penerbitan
Index of publications
3
SNI 19-1945-1990
Data statistik perpustakaan
Library statistics data
8
01.140.30
Dokumen tentang administrasi, perdagangan dan indu
Documents in administration, commerce and industry
SNI 19-4193-1996
Kode bahasa-bahasa di dunia
Code for the representation of language
15
SNI 19-4194-1996
Kode untuk bahasa-bahasa di Indonesia
Codes for the representation of languages in Indonesia
39
SNI 19-1951-1990
Direktori perpustakaan, pusat informasi dan dokumentasi
Directory of libraries, information and documentation center
01.140.40
Penerbitan
6
Publishing
SNI 19-4195-1996
Dokumentasi - Penomoran bagian dan sub bagian dalam dokumen tertulis
Documentation - Numbering of division and sub division in written documents
4
SNI 19-4191-1996
Dokumentasi - Penyajian terjemahan - Unsur-unsur yang perlu diperhatikan penerbit
Documentation - Presentation of translation - Elements to be considered by publishers
9
SNI 19-6963-2003
Dokumentasi - Judul punggung pada buku dan publikasi lainnya
Documentation - Spine titles on books and other publications
9
ISO 6357: 1985, Documentation - spine titles on book and other publication Translation SNI ISO 1086:2015
MOD Informasi dan dokumentasi - Lembar judul buku (ISO 1086:1991, IDT)
Information and documentation - The title of the book (ISO 1086: 1991, IDT)
14
ISO 1086:1991 IDT SNI ISO 18:2015
Dokumentasi - Daftar isi terbitan berkala (ISO 18:1981, IDT)
Documentation - Table of contents of periodicals (ISO 18: 1981, IDT)
ISO 18:1981 IDT
- 19 -
8
03
SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT
SOSIOLOGI. JASA. ORGANISASI DAN MANAJEMEN PERUSAHAAN
03.040
Labour. Employment
Tenaga kerja. Pekerjaan
SNI 19-1722-1989
03.080
Klasifikasi jabatan Indonesia
Classification of occupation in Indonesia
Services
Jasa
SNI ISO/IEC TS 170212:2012
890
Penilaian Kesesuaian - Persyaratan lembaga penyelenggaran audit dan sertifikasi sistem manajemen Bagian 2: Persyaratan kompetensi untuk audit dan sertifikasi sistem manajemen lingkungan
Conformity assessment - Requirements for bodies providing audit and certification of management systems Part 2: Competence requirements for audit and certification of environmental management systems
63
ISO/IEC TS 17021-2:2012 Translation SNI ISO/IEC 17020:2012
IDT Penilaian kesesuaian - Persyaratan untuk pengoperasian berbagai tipe lembaga inspeksi
Conformity assessment - Requirements for the operation of various types of inspection bodies
ISO/IEC 17020:2012, IDT IDT
03.080.30
Jasa bagi konsumen
SNI 7386:2008 SNI 8311:2016
03.080.99
Services for consumers
Pelayanan purna jual telepon genggam
Handphone after sales services
12
Usaha jasa perjalanan wisata
Travel agent service
16
Jasa lainnya
Other services
SNI ISO/IEC 20000-2:2009 Teknologi nformasi - Manajemen layanan - Bagian 2 : Aturan praktik
Information technology - Service management - Part 2 : Code of practice
ISO/IEC 20000-2:2005 Information technology - Service management - Part 2 : Code of practice IDT SNI 7331: 2007
Ketentuan gudang komoditi pertanian
Requirements of agriculture commodity warehouses
SNI ISO/IEC 20000-1:2009 Teknologi informasi - Manajemen layanan - Bagian 1 : Spesifikasi
13
Information technology - Service management - Part 1 : Specification
ISO/IEC 20000-1:2005 Information technology - Service management - Part 1 : Specification Translation
IDT
SNI 7229:2007
Ketentuan umum pelayanan purna jual
General requirements of after sales services
12
SNI 8152:2015
Pasar rakyat
Public market
22
SNI 7331:2016
Ketentuan gudang komoditas pertanian
Warehouse provisions for agricultural commodities
16
SNI 8278:2016
Ketentuan silo komoditas pertanian
Terms of silo for agricultural commodities
18
03.100
Company organization and management
Organisasi dan manajemen perusahaan
03.100.01
Organisasi dan manajemen perusahaan secara umum
SNI ISO 31000:2011
Company organization and management in general
Manajemen resiko - Prinsip dan panduan
Risk management - Principles and guidelines
ISO 31000:2009 Risk management - Principles and guidelines Translation SNI ISO 22301:2014
IDT Keamanan masyarakat - Sistem manajemen kelangsungan usaha Persyaratan (ISO 22301:2012, IDT)
Society security - Bussiness continuity management systems - Requirements
ISO 22301:2012 IDT SNI ISO 26000:2013
Panduan tanggung jawab sosial
Guidance on social responsibility
140
ISO 26000:2010 Translation SNI ISO 22315:2015
IDT Keamanan masyarakat - Evakuasi massal - Panduan untuk perencanaan (ISO 22315:2014, IDT)
Societal security - Mass evacuation - Guidelines for planning (ISO 22315:2014, IDT)
53
Risk management - Principles and guidelines (ISO 31000:2009, IDT)
65
ISO 22315:2014 IDT SNI ISO 31000:2011
Manajemen risiko - Prinsip dan Panduan (ISO 31000:2009, IDT)
ISO 31000:2009 IDT
03.100.10
Pembelian. Pengadaan. Manajemen persediaan
SNI ISO/IEC 31010:2016
Purchasing. Procurement. Management of stock
Manajemen risiko - Teknik penilaian risiko (ISO/IEC 31010:2009, IDT)
Risk management - Risk assessment technique (ISO/IEC 31010:2009, IDT)
100
ISO/IEC 31010:2009 IDT SNI ISO/TR 31004:2016
Manajemen risiko - Panduan untuk implementasi SNI ISO 31000 (ISO/TR 31004:2013, IDT)
Risk management - Guidance for implementation of SNI ISO 31000 (ISO/TR 31004:2013, IDT)
49
ISO/TR 31004:2013 IDT
03.100.30
Manajemen sumber daya manusia
Management of human resources
SNI 13-6562-2001
Kompetensi kerja tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja
Professional competency of oil and natural gas special technician on occupational safety and health
16
SNI 13-6552-2001
Kompetensi kerja tenaga teknik khusus migas bidang pemboran
Professional competency of oil and natural gas special technician on drilling
17
SNI 13-6551.4-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 4: Ahli topografi seismik
Curriculum of training for oil and natural gas special technicians on seismic investigation Part 4: Seismic surveyor supervisors
7
SNI 13-6555.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang perawatan sumur Bagian 1: Operator lantai perawatan sumur
Curriculum of training for oil and natural gas special technicians on well maintenance - Part 1: Well maintenance floorman
6
SNI 13-6557.5-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 5: Tingkat pengawas
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 5: Supervisors
7
SNI 13-6551.5-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 5: Ahli rekam seismik
Curriculum of training for oil and natural gas special technicians on seismic investigation Part 5: Seismic observers
7
SNI 19-7057-2004
Kurikulum pelatihan hiperkes dan keselamatan kerja bagi dokter perusahaan
The curriculum of health and occupational safety training for company doctors
SNI 13-6555.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang perawatan sumur Bagian 2: Operator menara perawatan sumur
Curriculum of training for oil and natural gas special technicians on well maintenace - Part 2: Well maintenance derrickman
- 20 -
13 7
SNI 13-6553.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang pemboran - Bagian 1: Juru bor
Curriculum of training for oil and natural gas special technicians on drilling - Part 1: Drillers
5
SNI 13-6565.5-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem manajemen lingkungan - Bagian 5: Koordinator perencana sistem manajemen lingkungan
Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 5: Environmental management system planning coordinators
7
SNI 13-6553.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang pemboran - Bagian 2: Operator lantai bor
Curriculum of training for oil and natural gas special technicians on drilling - Part 2: Floorman
9
SNI 13-6551.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 2: Juru bor seismik
Curriculum of training for oil and natural gas special technician on seismic investigation Part 2: Seismic driller
3
SNI 13-6563.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 1: Petugas keselamatan dan kesehatan kerja
Curriculum of training for oil and natural gas special technicians on occupational safety and health - Part 1: Occupational safety and health officials
6
SNI 19-4847-1998
Kualifikasi tenaga penyelam
Qualification of divers
SNI 13-6561-2001
Kompetensi kerja tenaga teknik khusus migas bidang laboratorium pengujian migas
Professional competency of oil and natural gas special technicians on oil and natural gas testing laboratories
35
SNI 13-6560-2001
Kompetensi kerja tenaga teknik khusus migas bidang penanganan dan pengawasan mutu bahan bakar minyak dan pelumas penerbangan
Professional competency of oil and natural gas special technician on handling and quality control of aviation fuels and lubricants
8
SNI 19-6559.1-2001
Kurikulum pelatihan tenaga teknik khusus operator pesawat angkat, pesawat angkut dan juru ikat beban
Curriculum of training for special technician of crane operator, lifting equipment operator and rigger
13
SNI 19-6558-2001
Kompetensi kerja tenaga teknik khusus operator pesawat angkat, pesawat angkut dan juru ikat beban
Professional competency of special technician of crane operator, lifting equipment operator and rigger
27
SNI 13-6554-2001
Kompetensi kerja tenaga teknik khusus migas bidang perawatan sumur
Professional competency of oil and natural gas special technician on well maintenance
14
SNI 19-7055-2004
Kurikulum pelatihan hiperkes dan keselamatan kerja bagi pengurus dan anggota panitia pembina keselamatan dan kesehatan kerja (P2K3) perusahaan
The curriculum of health and occupational safety training for boards and members of company occupational and health safety committees
14
SNI 13-6557.6-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 6: Tingkat pengawas utama
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 6: Principal supervisors
7
SNI 13-6555.4-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang perawatan sumur Bagian 4: Ahli pengendali perawatan sumur
Curriculum of training for oil and natural gas special technician on well maintenance - Part 4: Well maintenance controller
3
SNI 13-6555.3-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang perawatan sumur Bagian 3: Operator unit perawatan sumur
Curriculum of training for oil and natural gas special technician on well maintenance - Part 3: Well maintenance unit operator
2
SNI 13-6563.3-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 3: Ahli keselamatan dan kesehatan kerja
Curriculum of training for oil and natural gas special technicians on occupational safety and health - Part 3: Occupational safety and health specialists
7
SNI 13-6557.4-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 4: Tingkat operator kepala
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 4: Lead operator
7
SNI 13-6551.6-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 6: Ahli instrumen seismik
Curriculum of training for oil and natural ga special tehnicians on seismic investigation Part 6: Seismic instrument engineers
7
SNI 13-6557.3-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 3: Tingkat operator
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 3: Operators
7
SNI 13-6557.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 2: Tingkat operator madya
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 2: Middle operators
7
SNI 13-6551.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 1: Juru ukur seismik
Curriculum of training for oil and natural gas special technician on seismic investigation Part 1: Seismic surveyor
3
SNI 13-6568-2001
Kurikulum tenaga teknik khusus migas untuk inspektur perpipaan penyalur
Curriculum of training for oil and natural gas special technicians for distribution piping inspectors
6
SNI 13-6550-2001
Kompetensi kerja tenaga teknik khusus migas bidang penyelidikan seismik
Professional competency of oil and natural gas special technicians on seismic investigation
SNI 19-6567-2001
Kurikulum pelatihan tenaga teknik khusus ketel uap (boiler)
Curriculum of training for boiler special technician
SNI 19-6566-2001
Kompetensi kerja tenaga teknik khusus ketel uap (boiler)
Professional competency of boiler special technician
SNI 13-6565.6-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem manajemen lingkungan - Bagian 6: Koordinator pengendali penerapan dan operasional sistem manajemen lingkungan
Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 6: Coordinator of controll-staff for application and operation of environmental management systems
6
SNI 13-6565.4-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem manajemen lingkungan - Bagian 4: Auditor internal sistem manajemen lingkungan
Curriculum of training for oil and natural gas special technician on environmental management systems - Part 4: Internal auditors of environmental management systems
6
SNI 13-6563.4-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 4: Petugas regu pemadam kebakaran
Curriculum of training for oil and natural gas special technicians on occupational safety and health - Part 4: Fireman
7
SNI 13-6565.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem management lingkungan - Bagian 2: Petugas pengendali limbah padat dan limbah bahan berbahaya dan beracun (B3) industri migas
Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 2: Controll staff of solid waste and hazardous and poisonous material waste of oil and natural gas
6
SNI 13-6551.3-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang penyelidikan seismik - Bagian 3: Juru tembak seismik
Curriculum of training for oil and natural gas technicians on seismic investigation sector Part 3: Seismic shooter
7
SNI 13-6565.3-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem manajemen lingkungan - Bagian 3: Petugas pengendali limbah cair industri migas
Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 3: Control-staff of fluid waste in oil and natural gas industries
6
SNI 13-6565.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang sistem manajemen lingkungan - Bagian 1: Petugas pengendali dokumen sistem manajemen lingkungan
Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 1: Document control-staff of environmental management systems
6
SNI 13-6564-2001
Kompetensi kerja tenaga teknik khusus migas bidang sistem manajemen lingkungan
Professional competency for oil and natural gas special technician on environmental management system
SNI 13-6563.6-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 6: Ahli penanggulangan kebakaran
Curriculum of training for oil and natural gas special tehnicians on occupational safety and health - Part 6: Fire protection specialists
SNI 19-7056-2004
Kurikulum pelatihan hiperkes dan keselamatan kerja bagi pengelola makanan tenaga kerja di tempat kerja
The curriculum of health and occupational safety training for worker food organizers at work places
SNI 13-6563.2-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 2: Koordinator keselamatan dan kesehatan kerja
Curriculum of training for oil and natural gas special technicians on occupational safety and health - Part 2: Occupational safety and health coordinators
6
SNI 13-6557.1-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai Bagian 1: Tingkat operator muda
Curriculum for oil and natural gas special technician training on offshore and shore production operation using offshore appropriate technology - Part 1: Junior operators
7
SNI 13-6563.5-2001
Kurikulum pelatihan tenaga teknik khusus migas bidang keselamatan dan kesehatan kerja - Bagian 5: Koordinator pemadam kebakaran
Curriculum of training for oil and natural gas special technician on occupational safety and health - Part 5: Fire fighting coordinator
7
- 21 -
6
15 4 15
12 7 11
SNI 13-6556-2001
Kompetensi kerja tenaga teknik khusus migas bidang operasi produksi lepas pantai dan darat yang menggunakan teknologi setara lepas pantai
Professional competency of oil and natural gas special tehnicians on offshore and shore production operation using offshore appropriate technology
SNI 13-6979.4-2003
Kompetensi kerja tenaga teknis khusus pertambangan - Bagian 4: Juru ledak penambangan bahan galian
Professional competency of mining special technicians - Part 4: Quarrying material exploders
9
SNI 13-6979.1-2003
Kompetensi kerja tenaga teknis khusus pertambangan - Bagian 1: Manajer keselamatan dan kesehatan kerja
Professional competency of mining special technicians - Part 1: Occupational health and safety managers
9
SNI 13-6978.3-2003
Kompetensi kerja tenaga teknis khusus geologi - Bagian 3: Teknisi pengeboran eksplorasi
Professional competency of geology special techicians - Part 3: Exploration drilling technicians
9
SNI 13-6978.2-2003
Kompetensi kerja tenaga teknis khusus geologi - Bagian 2: Teknisi geoteknik
Professional competency of geology special technicians - Part 2: Geotechnical technicians
9
SNI 13-6979.3-2003
Kompetensi kerja tenaga teknis khusus pertambangan - Bagian 3: Juru bor peledakan
Professional competency of mining special technician - Part 3: Explosion drillers
9
SNI 13-6979.5-2003
Kompetensi kerja tenaga khusus pertambangan - Bagian 5: Operator peremuk batuan
Professional competency of mining special technicians - Part 5: Rock crusher operators
9
SNI ISO 20807:2008
Uji tak rusak - Kualifikasi personel uji tak rusak untuk aplikasi terbatas uji tak rusak
Non-destructive testing -- Qualification of personnel for limited application of nondestructive testing (ISO 20807:2004, IDT
18
ISO 20807:2004 Non-destructive testing - Qualification of personnel for limited application of non-destructive testing Translation
IDT
SNI 13-6979.6-2003
Kompetensi kerja tenaga teknis khusus pertambangan - Bagian 6: Teknisi revegetasi tambang
Professional competency of mining special technician - Part 6: Mining revegetation technicians
9
SNI 13-6978.1-2003
Kompetensi kerja tenaga teknis khusus geologi - Bagian 1: Teknisi pengeboran air bawah tanah
Professional competency of geology special technicians - Part 1: Drilling technicians for water underground
9
SNI 13-6979.2-2003
Kompetensi kerja tenaga teknis khusus pertambangan - Bagian 2: Penyurvei tambang
Professional competency of mining special technician - Part 2: Mining surveyors
9
SNI ISO/TS 22809:2011
Uji tak rusak - Diskontinuitas pada spesimen untuk penggunaan dalam ujian kualifikasi
Non-destructive testing - Diskcontinuities in specimens for use in qualification examinations
ISO/TS 22809:2007 Non-destructive testing - Diskcontinuities in specimens for use in qualification examinations Translation SNI ISO 10015:2013
IDT Manajemen mutu - Panduan pelatihan (ISO 10015:1999, IDT)
Quality management - Guidelines for training (ISO 10015:1999, IDT)
23
ISO 10015:1999, IDT Translation
03.120
IDT
Quality
Mutu
SNI 04-6297-2000
Pertumbuhan keandalan - Metode uji statistik dan metode estimasi
Reliability growth - Statistical test and estimation methods
29
IEC 61164: 1995, Reliability growth - Statistical test and estimation methods Translation
03.120.01
IDT
Mutu secara umum
Quality in general
SNI 04-3854-1995
Manajemen keandalan dan mampu rawat
Reliability and maintainability management
SNI 04-3881-1995
Penyajian perkiraan keandalan, kemampuan rawat, dan ketersediaan
Presentation of reliability, maintainability and availability prediction
10
SNI 04-3872-1995
Petunjuk mengenai mampu rawat perlengkapan
Guide for maintainability of equipment
15
SNI 04-3880-1995
Daftar serta petunjuk matematis untuk istilah dan definisi keandalan
List and mathematic guide for terminology and definition of reliability
23
SNI 04-7114-2005
Teknik analisis keandalan sistem - Prosedur moda kegagalan dan analisis efek
Analysis techniques for system reliability - Procedures for failure mode and effect analysis (FMEA)
23
7
IEC 60812: 1985, Analysis techniques for system realibility - Procedure for failure mode and effects analysis (FMEA) Translation
03.120.10
IDT
Manajemen mutu dan jaminan mutu
Quality management and quality assurance
SNI 19-4288-1996
Pedoman cara produksi yang baik air minum dalam kemasan
Good manufacturing practices for drinking water in pack
24
SNI 19-9004.2-1995
Manajemen mutu dan unsur-unsur sistem mutu - Bagian 2 : Pedoman untuk jasa
Quality management and element of quality system - Part 2: Guidance for service performance
33
SNI 19-9004.3-1996
Elemen sistem mutu dan manajemen mutu - Bagian 3: Panduan bagi material yang diproses
Element of quality management and quality system - Part 3: Manual for processed materials
52
SNI 19-9000.1-1998
Standar manajemen mutu dan jaminan mutu - Bagian 1: Pedoman untuk seleksi dan penggunaan
Quality management and quality assurance standards - Part 1: Guidelines for selection and use
47
SNI 19-9000.2-1998
Standar manajemen mutu dan jaminan mutu - Bagian 2: Pedoman umum untuk pemakaian SNI 19-9001, SNI 19-9002 dan SNI 19-9003
Quality management and quality assurance standards - Part 2 : General guidelines for the application of SNI 19-9001, SNI 19-9002, and SNI 19-9003
30
SNI 19-9000.4-1998
Standar manajemen mutu dan jaminan mutu. Bagian 4: Pedoman untuk manajemen program keandalan
Quality management and quality assurance standards - Part 4: Guide to reliability program management
10
SNI 19-9000.3-1996
Standar manajemen mutu dan jaminan mutu, Bagian 3. Panduan bagi penerapan SNI 19-9001 dalam pengembangan, pasokan dan pemeliharaan perangkat lunak
Quality management and quality assurance standards, Part 3. Guidelines for the application of SNI 9001 to the development, supply and maintenance of software
26
SNI 19-9000-2001
Sistem manajemen mutu - Dasar-dasar dan kosakata
Quality management systems - Fundamentals and vocabulary
46
38
ISO 9000: 2000, Quality management systems - Fundamentals and vocabulary Translation
IDT
SNI 19-9004.4-1998
Unsur-unsur manajemen mutu dan sistem mutu - Bagian 4: Pedoman untuk peningkatan mutu
Quality management and quality system element - Part 4: Guidelines for quality improvement
SNI ISO 9004:2009
Pengelolaan organisasi untuk sukses berkelanjutan - Pendekatan manajemen mutu
Managing for the sustained success of an organization - A quality management approach
ISO 9004:2009 Managing for the sustained success of an organization - A quality management approach Translation SNI ISO 10014:2009
IDT Manajemen mutu - Panduan untuk realisasi manfaat finansial dan ekonomi
Quality management -- Guidelines for realizing financial and economic benefits
ISO 10014:2006 Quality management -- Guidelines for realizing financial and economic benefits Translation SNI 19-19011-2005
IDT Panduan audit sistem manajemen mutu dan/atau lingkungan
Guidelines for quality and/or environmental management system audit
ISO 19011: 2002, guidelines for quality and/or environmental management systems auditing Translation SNI ISO/TS 10004:2011
IDT Manajemen mutu - Kepuasan pelanggan - Pemantauan dan pengukuran
ISO/TS 10004:2010 Quality management - Customer satisfaction - Guidelines for monitoring and measuring Translation
IDT
- 22 -
Quality management - Customer satisfaction - Guidelines for monitoring and measuring
37
SNI ISO/TS 16949:2009
Sistem manajemen mutu - Persyaratan khusus untuk penerapan ISO 9001:2008 bagi organisasi produksi otomotif dan bagian jasa yang relevan
Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organization
ISO/TS 16949:2009 Quality management systems - Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organization Translation SNI ISO 15189:2009
IDT Laboratorium medik - Persyaratan khusus untuk mutu dan kompetensi
Medical laboratories - Particular requirements for quality and competence
ISO 15189:2007 Medical laboratories -- Particular requirements for quality and competence Translation SNI ISO 9001:2008
IDT Sistem manajemen mutu - Persyaratan
Quality management systems - requirements
28
ISO 9001:2008, Quality management systems - requirements Translation SNI ISO/IEC 17000:2009
IDT Penilaian kesesuaian - Kosa kata dan prinsip umum
Conformity assessment - Vocabulary and general principle
ISO 17000:2004 Conformity assessment - Vocabulary and general principle Translation SNI ISO 10005:2009
IDT Sistem manajemen mutu - Pedoman untuk rencana mutu
Quality management systems - Guidelines for quality plans
ISO 10005:2009 Quality management systems - Guidelines for quality plans Translation SNI ISO 10004:2012
IDT Manajemen mutu - Kepuasan pelanggan - Panduan pemantauan dan pengukuran
Quality management - Customer satisfaction - Guidelines for monitoring and measuring
14
Medical devices - Quality management sistems - Requrements for regulatory purposes
14
General requirements of competence of reference material producers (ISO Guide 34: 2015, IDT)
46
ISO 10004:2012 IDT
IDT
SNI ISO 13485:2003
Peralatan kesehatan - Sistem manajemen mutu - Persyaratan untuk tujuan regulasi
ISO 13485:2003 dan ISO 13485:2003/Cor.1:2009 IDT
IDT
SNI ISO Guide 34:2015
Persyaratan umum kompetensi produsen bahan acuan (ISO Guide 34:2015, IDT)
ISO Guide 34:2015 IDT SNI ISO 18091:2014
Sistem manajemen mutu - Pedoman untuk penerapan SNI ISO 9001:2008 pada pemerintah daerah (ISO 18091:2014, IDT)
Quality management systems - Guidelines for the application of ISO 9001:2008 in local government
164
ISO 18091:2014 IDT SNI 4807:2015
Metode uji pengukuran temperatur beton segar campuran semen hidraulis (ASTM C1064/C1064M-08, IDT)
Standard test method for temperature of freshly mixed hydraulic-cement concrete (ASTM C1064/C1064M-08, IDT)
16
ASTM C1064/C1064M-08 IDT SNI ISO/TS 17582:2014
Sistem manajemen mutu - Persyaratan khusus penerapan SNI ISO 9001:2008 untuk organisasi pemilu di semua tingkat pemerintahan
Quality management systems - particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government
ISO/TS 17582:2014 IDT SNI 8340:2016
Sistem manajemen biorisiko laboratorium
Bio-risk laboratory management system
SNI ISO 9000:2015
Sistem manajemen mutu - Dasar-dasar dan kosakata (ISO 9000:2015, IDT)
Quality management systems - Fundamentals and vocabulary (ISO 9000:2015, IDT)
102
ISO 9000:2015 IDT SNI ISO 9001:2015
Sistem manajemen mutu - Persyaratan (ISO 9001:2015, IDT)
Quality management systems - Requirements (ISO 9001:2015, IDT
67
ISO 9001:2015 IDT SNI 19-10013-1996
Pedoman untuk pengembangan manual mutu
Guidelines for the development of quality manual
17
SNI 19-10012.1-1996
Persyaratan jaminan mutu untuk peralatan pengukuran. Bagian 1 : Sistem konfirmasi metrologi untuk peralatan pengukuran
Quality assurance requirements for measuring equipment. Part 1 : Metrological confirmation systems for measuring equipment
22
SNI 19-10007-1998
Manajemen mutu. Pedoman untuk manajemen konfigurasi
Quality management. Guidelines for configuration management
19
SNI 19-10005-1998
Manajemen mutu. Pedoman untuk rencana mutu
Quality management. Guidelines for quality plans
26
03.120.20
Sertifikasi produk dan perusahaan Penilaian kesesu
Product and company certification. Conformity asse
SNI 19-17020-1999
Persyaratan umum pengoperasian berbagai lembaga inspeksi
General criteria for the operation of various type of bodies performing inspection
SNI ISO/IEC 17043:2010
Penilaian kesesuaian - Persyaratan umum uji profisiensi
Conformity assessment - General requirements for proficiency testing
ISO/IEC 17043:2010 Conformity assessment - General requirements for proficiency testing Translation SNI ISO/IEC Guide 60:2010
IDT Penilaian Kesesuaian - Petunjuk praktik yang baik
Conformity assessment - Code of good practice
ISO/IEC Guide 60:2004 Conformity assessment - Code of good practice Translation
IDT
SNI ISO/IEC 17050-1:2010 Penilaian kesesuaian - Deklarasi kesesuaian oleh pemasok - Bagian 1: Persyaratan umu
Conformity assessment -- Supplier's declaration of conformity - Part 1: General requirements
ISO/IEC 17050-1:2004 Conformity assessment - Supplier's declaration of conformity - Part 1: General requirements Translation
IDT
SNI ISO/IEC 17025:2008
Persyaratan umum untuk kompetensi laboratorium penguji dan kalibrasi
General requirement for competency of calibration and testing laboratories
SNI ISO/IEC 17007:2010
Penilaian kesesuaian - Pedoman penyusunan dokumen normatif yang sesuai untuk digunakan dalam penilaian kesesuian
Conformity assessment - Guidance for drafting normative documents suitable for use for conformity assessment
ISO/IEC 17007:2009 Conformity assessment - Guidance for drafting normative documents suitable for use for conformity assessment Translation SNI ISO/IEC 17024:2009
IDT Penilaian kesesuaian - Persyaratan umum lembaga sertifikasi personel, IDT
ISO/IEC 17024:2003, Conformity assessment -- General requirements for bodies operating certification of persons, IDT
ISO/IEC 17024:2003 Conformity assessment -- General requirements for bodies operating certification of persons Translation
IDT
SNI ISO/IEC 17050-2:2010 Penilaian kesesuaian - Deklarasi kesesuaian oleh pemasok - Bagian 2: Dokumen pendukung
Conformity assessment - Supplier's declaration of conformity - Part 2: Supporting documentation
ISO/IEC 17050-2:2004 Conformity assessment -- Supplier's declaration of conformity - Part 2: Supporting documentation IDT
- 23 -
17
SNI ISO/IEC 17021-1:2011 Penilaian kesesuaian - Persyaratan lembaga penyelenggara audit dan sertifikasi sistem manajemen
Conformity assessment - Requirements for bodies providing audit and certification of management systems
97
ISO/IEC 17021:2011 Conformity assessment - Requirements for bodies providing audit and certification of management systems Translation SNI ISO/IEC 17011:2011
IDT Penilaian kesesuaian – Persyaratan umum badan akreditasi dalam mengakreditasi lembaga penilaian kesesuaian
Conformity assessment -- General requirements for accreditation bodies accrediting conformity assessment bodies
46
ISO/IEC 17011:2004 Translation SNI ISO/IEC 17024:2012
IDT Penilaian kesesuaian - Persyaratan umum lembaga sertifikasi person
Conformity assessment -- General requirements for bodies operating certification of persons
ISO/IEC 17024:2012 IDT
IDT
SNI ISO/TS 22003:2013
Sistem manajemen keamanan pangan - Persyaratan lembaga penyelenggara audit dan sertifikasi sistem manajemen keamanan pangan (ISO/TS 22003:2013, IDT)
Food safety management systems - Requirements for bodies providing audit and certification of food safety management system (ISO/TS 22003:2013, IDT)
57
Conformity assessment - Vocabulary related to competence of persons used for certification of person (ISO/IEC TS 17027:2014, IDT)
23
ISO/TS 22003:2013 IDT SNI ISO/IEC TS 17027:2014
Penilaian kesesuaian - Kosakata terkait kompetensi person yang digunakan untuk sertifikasi person (ISO/IEC TS 17027:2014, IDT)
ISO/IEC TS 17027:2014 IDT SNI ISO/IEC TS 170213:2013
Penilaian kesesuaian - Persyaratan lembaga penyelenggara audit dan sertifikasi sistem manajemen — Bagian 3 : Persyaratan kompetensi audit dan sertifikasi sistem manajemen mutu (ISO/IEC TS 17021-3:2013, IDT)
Conformity assessment - Requirements for bodies providing audit and certification of management systems — Part 3: Competence requirements for auditing and certification of quality management systems
ISO/IEC TS 17021-3:2013 IDT SNI ISO/IEC TS 17023:2013
Penilaian Kesesuaian - Panduan penentuan durasi audit sertifikasi sistem manajemen (ISO/IEC TS 17023:2013, IDT)
Conformity assessment - Guidelines for determining the duration of management system certification audit
ISO/IEC TS 17023:2013 IDT SNI ISO/IEC TS 17022:2012
Penilaian kesesuaian - Persyaratan dan rekomendasi isi laporan audit sistem manajemen oleh pihak ketiga
Conformity assessment - Requirements and recommendations for content of a third-party audit report on management systems
14
ISO/IEC TS 17022:2012 IDT
IDT
SNI ISO/IEC 17065:2012
Penilaian kesesuaian - Persyaratan untuk lembaga sertifikasi produk, proses dan jasa
Conformity assessment -- Requirements for bodies certifying products, processes and services
ISO/IEC 17065 ed1. 1.0 (2012-09) IDT
IDT
SNI ISO 15189:2012
Laboratorium medik - Persyaratan mutu dan kompetensi
Medical laboratories - Requirements for quality and competence
94
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010, IDT) Amandement 1
35
Conformity assessment - Requirements management bodies audit and certification of management systems - Part 1: Requirements (ISO/IEC 17021-1:2015, IDT)
64
ISO 15189:2012 IDT
IDT
SNI ISO/IEC 17043:2010/Amd1:2015
Penilaian kesesuaian - Persyaratan umum uji profisiensi (ISO/IEC 17043:2010, IDT) Amandemen
ISO/IEC 17043:2010 IDT SNI ISO/IEC 17021-1:2015 Penilaian kesesuaian - Persyaratan lembaga penyelenggara audit dan sertifikasi sistem manajemen - Bagian 1: Persyaratan (ISO/IEC 170211:2015, IDT) ISO/IEC 17021-1:2015 IDT
03.120.30
Aplikasi metode statistik
Application of statistical methods
SNI 19-2308-1991
Interpretasi data secara statistik - Penentuan selang (interval) toleransi secara statistik
Statistical interpretation of data - Determination of a statistical tolerance interval
SNI ISO 3951-1:2016
Prosedur pengambilan contoh untuk pemeriksaan cara variabel – Bagian 1: Spesifikasi untuk rencana pengambilan contoh tunggal yang diindeks dengan batas mutu penerimaan (AQL) untuk pemeriksaan lot per lot dengan karakteristik mutu tunggal dan AQL tunggal (ISO 3951-1:2013, IDT)
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by lot inspection for a single quality characteristic and a single AQL (ISO 3951-1:2013, IDT)
205
Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-5:2005, IDT)
101
22
ISO 3951-1:2013 SNI ISO 2859-5:2015
IDT Prosedur pengambilan contoh untuk pemeriksaan cara atribut - Bagian 5: Sistem rencana pengambilan contoh bertahap diindeks dengan batas mutu penerimaan (AQL) untuk pemeriksaan lot-per-lot (ISO 2859-5:2005, IDT)
ISO 2859-5:2005 IDT SNI 19-1609-1989
03.180
Statistik, Istilah Umum
Statistics, General terms
48
Education
Pendidikan
SNI 19-2968-1992
Laboratorium bahasa
Language laboratories
SNI ISO 29990:2013
Layanan jasa pembelajaran untuk pendidikan non formal dan pelatihan Persyaratan dasar untuk penyedia jasa (ISO 29990:2010, IDT)
Learning services for non-formal education and training - Basic requirements for service providers (ISO 29990:2010, IDT)
8 25
ISO 29990:2010 Coversheet
03.220
IDT
Transport
Transportasi
03.220.01
Transportasi secara umum
SNI 04-3890.3-2000
Transport in general
Klasifikasi kondisi lingkungan - Bagian 3: Klasifikasi kelompok parameter lingkungan dan tingkat kecermatannya - Transportasi
Classification of enviromental condition - Part 3: Classification of group of enviromental parameters and their severities - Transportation
26
IEC 721-3-2 1985-01, Clasification of environmental conditions Part 3 : Clasification of group of environmental parameters and their severities. Transportation Translation
03.220.40
IDT
Transportasi melalui air
SNI 10-4136-1996
Transport by water
Sistem perambuan perairan wilayah A
Traffic sign system in A territorial waters
- 24 -
11
03.220.50
Transportasi udara
Air transport
SNI 03-7066-2005
Pemeriksaan penumpang dan barang yang diangkut pesawat udara di bandar udara
The screening of airplane passangers and goods in airports
33
SNI 8148:2015
Kinerja operasional bandar udara
The operational performance of airports
22
SNI 8149:2015
Pengamanan fasilitas dan instalasi vital bandar udara
Securing facilities and vital installations airports
14
03.240
Postal services
Jasa pos
SNI 12-2375-1991
Perekat prangko RI
Indonesian postage stamp glue
14
SNI 12-2373-1991
Perangko Republik Indonesia
Indonesian postage stamps
13
- 25 -
07 07.030
MATHEMATICS. NATURAL SCIENCES
MATEMATIKA. ILMU PENGETAHUAN ALAM
Phisics. Chemistry
Fisika. Kimia
SNI ISO/TS 80004-7:2013
Nanoteknologi - Kosa kata - Bagian 7: Diagnostik dan terapi untuk perawatan kesehatan
Nanotechnologies - Vocabulary - Part 7: Diagnostics and therapeutics for healthcare
6
Nanotechnology - Vocabulary - Part 6: Characteristics of nanoscale objects (ISO / TS 80004-6: 2013, IDT)
34
ISO/TS 80004-7:2011 Translation SNI ISO/TS 80004-6:2015
IDT Nanoteknologi - Kosakata - Bagian 6: Karakteristik objek nano (ISO/TS 80004-6:2013, IDT)
ISO / TS 80004-6: 2013 IDT SNI ISO/TS 80004-5:2013
Nanoteknologi - Kosakata - Bagian 5: Hubungan material nano dan biologi
Nanotechnologies - Vocabulary - Part 5: Nano/bio interface
6
ISO/TS 80004-5:2011 IDT SNI ISO/TS 11931:2015
Nanoteknologi - Kalsium karbonat berskala nano dalam bentuk serbuk Karakteristik dan pengukuran (ISO/TS 11931:2012, IDT)
anotechnology - the nanoscale calcium carbonate in the form of powder - Characteristics and measurements (ISO / TS 11931: 2012, IDT)
11
Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test
29
ISO / TS 11931: 2012 IDT SNI ISO 29701:2011
Nanoteknologi - Uji endotoksin pada sampel material nano dalam sistem in vitro - Uji Limulus amebocyte lysate (LAL)
ISO 29701:2010 Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test Translation SNI ISO/TS 11937:2015
IDT Nanoteknologi - Titanium dioksida berskala nano dalam bentuk serbuk Karakteristik dan pengukuran (ISO/TS 11937:2012, IDT)
Nanotechnology - the nanoscale titanium dioxide in the form of powder - Characteristics and measurements (ISO / TS 11937: 2012, IDT)
11
Nanotechnology - Guidelines for the development of the test materials represent, containing nanoscale objects in the form of a dry powder (ISO / TS 16 195: 2013, IDT)
16
Nanotechnologies - Methodology for the classification and categorization of nanomaterials
32
ISO / TS 11937: 2012 IDT SNI ISO/TS 16195:2015
Nanoteknologi - Pedoman untuk pengembangan bahan uji yang mewakili, mengandung objek nano dalam bentuk serbuk kering (ISO/TS 16195:2013, IDT)
ISO / TS 16 195: 2013 IDT SNI ISO/TR 11360:2011
Nanoteknologi - Metodologi klasifikasi dan penggolongan material nano
ISO/TR 11360:2010 Nanotechnologies - Methodology for the classification and categorization of nanomaterials Translation SNI ISO/TS 17200:2015
IDT Nanoteknologi - Partikel nano dalam bentuk serbuk - Karakteristik dan pengukuran (ISO/TS 17200:2013, IDT)
Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO / TS 17200: 2013, IDT)
15
Nano materials - Preparation of material safety data sheet (MSDS) (ISO / TR 13329: 2012, IDT)
34
ISO / TS 17200: 2013 IDT SNI ISO/TR 13329:2015
Material nano - Persiapan lembar data keselamatan material (MSDS) (ISO/TR 13329:2012, IDT)
ISO / TR 13329: 2012 IDT SNI ISO/TS 80004-4:2013
Nanoteknologi - Kosakata - Bagian 4: Material berstruktur nano
Nanotechnology - Vocabulary - Part 4: Nanostructured materials
6
ISO/TS 80004-4:2011 Translation SNI ISO/TS 12025:2015
IDT Material nano - Kuantifikasi pelepasan objek nano dari serbuk yang dihasilkan dari aerosol (ISO/TS 12025:2012, IDT)
Nano materials - Quantification of the release of nanoscale objects from powder produced from aerosols (ISO / TS 12025: 2012, IDT)
42
Nanotechnology - Guidelines for the physical-chemical characterization of nanoscale materials engineered for toxicology assessment (ISO / TR 13014: 2012, IDT)
34
Nanotechnology - The model taxonomic framework for use in the development of vocabulary - The core concept (ISO / TS 12802: 2010, IDT)
14
Nanotechnology - Manual measurement methods for nano and micro tribologi- (ISO / TR 11 811: 2012, IDT)
24
Nanotechnology - Characterization of nanoparticles in inhalation exposure chamber for inhalation toxicity testing (ISO 10808: 2010, IDT)
28
Nanotechnology - The formation of metal nanoparticles for inhalation toxicity testing using the method of evaporation/condensation (ISO 10801:2015, IDT)
30
16
ISO / TS 12025: 2012 IDT SNI ISO/TR 13014:2015
Nanoteknologi - Panduan untuk karekterisasi kimia-fisik material berskala nano terekayasa untuk penilaian toksikologi (ISO/TR 13014:2012, IDT)
ISO / TR 13014: 2012 IDT SNI ISO/TR 12802:2015
Nanoteknologi - Kerangka kerja model taksonomi untuk penggunaan dalam pengembangan kosakata - Konsep inti (ISO/TS 12802:2010, IDT)
ISO / TS 12802: 2010 IDT SNI ISO/TR 11811:2015
Nanoteknologi - Panduan metode pengukuran untuk tribologi- nano dan mikro (ISO/TR 11811:2012, IDT)
ISO / TR 11811: 2012 IDT SNI ISO 10808:2015
Nanoteknologi - Karakterisasi partikel nano dalam ruang paparan inhalasi untuk pengujian toksisitas inhalasi (ISO 10808:2010, IDT)
ISO 10808: 2010 IDT SNI ISO 10801:2015
Nanoteknologi - Pembentukan partikel nano logam untuk pengujian toksisitas inhalasi menggunakan metode evaporasi/kondensasi (ISO 10801:2015, IDT)
ISO 10801:2015 IDT SNI 7803:2013
Prosedur pengumpulan nama rupa bumi
Procedures for collecting names of surface of the earth
SNI ISO/TS 12805:2013
Nanoteknologi - Spesifikasi material - Pedoman untuk menentukan spesifikasi objek nano
Nanotechnologies - Materials specifications - Guidance on specifying nano-objects
8
ISO/TS 12805:2011 Translation
07.040
IDT
Astronomy. Geodesy. Geography
Astronomi. Geodesi. Geografi
SNI 19-6502.1-2000
Spesifikasi teknis peta rupabumi skala 1 : 10.000
Technical specification of topography maps scala 1 : 10.000
SNI 7336:2008
Pertukaran data lintang, bujur, dan tinggi lokasi geografis
Data exchange for geografic location of diagonal, longitude and latitude
SNI 7646:2010
Survei hidrografi menggunakan singlebeam echosounder
Hydrographic surveys using singlebeam echosounder
SNI 6502.2:2010
Spesifikasi penyajian peta rupa bumi skala 1:25.000
Technical specification of topography maps scale 1 : 25.000
- 26 -
26
SNI 6502.3:2010
Spesifikasi penyajian peta rupa bumi skala 1:50.000
Technical specification of topography maps scale 1 : 50.000
SNI 6502.4:2010
Spesifikasi penyajian peta rupa bumi skala 1:250.000
Technical specification of topography maps scale 1 : 250.000
SNI 7335:2008
Metadata spasial
Spatial metadata
SNI 7925:2013
Pemetaan lahan gambut skala 1:50.000 berbasis citra penginderaan jauh
1:50,000 scale mapping of peat-based remote sensing image
SNI 7644:2010
Basis data spasial oseanografi suhu, salinitas, oksigen terlarut, derajat keasaman, turbiditas, dan kecerahan
Spatial database oceanographic temperature, salinity, dissolved oxygen, pH, turbidity, and brightness
SNI 7645:2010
Klasifikasi penutup lahan
Land cover classification
SNI 7716:2011
Pemetaan habitat perairan laut dangkal - Bagian 1: Pemetaan terumbu karang dan padang lamun
Mapping of shallow marine habitat - Part 1: Mapping of coral reefs and seagrass beds
SNI 7717:2011
Survei dan pemetaan mangrove
Survey and mapping of mangrove
SNI 7924:2013
Instalasi stasiun pasang surut
Installation of ebb and flow stations
SNI 7966:2014
Spesifikasi teknis triangulasi udara
Technical specifications of aerial triangulation
SNI 7988:2014
Survei batimetri menggunakan multibeam echosounder
Bathymetric surveys using multibeam echosounder
SNI 7645-1:2014
Klasifikasi penutup lahan - Bagian 1: Skala kecil dan menengah
Land cover classification - Part 1: Small and medium scale
SNI 7965:2014
Prosedur pemotretan udara digital
Procedures of digital aerial photography
SNI 7987:2014
Klasifikasi liputan dasar laut
Classification coverage of the seafloor
SNI IEC 61331-3:2013
Alat pelindung terhadap radiasi sinar-X pada diagnostik medis - Bagian 3: Pakaian pelindung dan alat pelindung gonad
Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protective devices for gonads
16
16
15
IEC 61331-3:1998 Translation
IDT
SNI 7802:2013
Prosedur pemotretan udara analog
Procedure of analog aerial photography
16
SNI 7645-1:2014
Klasifikasi penutup lahan - Bagian 1: Skala kecil dan menengah
Land cover classification - Part 1: Small and Medium Scale
63
SNI 8197:2015
Metode pemetaan rawan banjir skala 1:50.000 dan 1:25.000
Flood-prone method of mapping scale of 1:50.000 and 1:25.000
16
SNI 8202:2015
Ketelitian peta dasar
Accuracy base map
31
SNI ISO/TS 19127:2015
Informasi geografis - Kode dan parameter geodetik (ISO/TS 19127:2007, IDT)
Geographic information - Geodetic codes and parameters (ISO/TS 19127:2007, IDT)
51
ISO 191276:2005 IDT SNI 8200:2015
Prosedur penentuan batas Daerah Aliran Sungai (DAS) untuk peta skala 1:250.000
Delimitation procedure Watershed (DAS) to a map scale of 1:250.000
15
SNI 6728.2:2015
Penyusunan neraca spasial sumber daya alam - Bagian 2: Sumber daya hutan
Preparation of the spatial balance of natural resources - Part 2: Forest resources
32
SNI 6728.1:2015
Penyusunan neraca spasial sumber daya alam - Bagian 1: Sumber daya air
Preparation of the spatial balance of natural resources - Part 1: Water resources
31
SNI 6728.4:2015
Penyusunan neraca spasial sumber daya alam - Bagian 4: Sumber daya dan cadangan mineral dan batubara
Preparation of the spatial balance of natural resources - Part 4: Resources and reserves of mineral and coal
35
SNI 8196:2015
Spesifikasi penyajian peta curah hujan
Specifications presentation for rainfall map
23
SNI 8310.1:2016
Penyajian atlas tactual (tactile) - Bagian 1: Simbol unsur peta dasar
Presentation tactile atlas - Part 1: Symbols basic map elements
SNI 19-6727-2002
Peta dasar lingkungan pantai Indonesia skala 1:250000
Basic maps of Indonesian coast environment scale 1:250000
38
SNI 19-6725-2002
Peta lingkungan bandar udara Indonesia skala 1:25000
Enviromental maps of Indonesia airport , scale 1:25000
37
SNI 19-6726-2002
Peta dasar lingkungan pantai Indonesia skala 1:50000
Basic maps of indonesia coast environment , scale 1:50000
35
07.060
Geology. Meteorology. Hydrology
Geologi. Meteorologi. Hidrologi
SNI 13-6183-1999
Penyusunan peta geomorfologi
Preparation of geomophology maps
16
SNI 13-4686-1998
Penyusunan peta anomali gaya berat
Preparation of gravity anomaly maps
17
SNI 13-4689-1998
Penyusunan peta kawasan rawan bencana gunung api
Preparation of maps of volcano disaster disturbance area
17
SNI 18-6009-1999
Klasifikasi potensi energi panas bumi di Indonesia
Classification of potential earth heat energy in Indonesia
14
SNI 13-7124-2005
Penyusunan peta zona kerentanan gerakan tanah
The compiling of susceptibility zone map of land movements
15
SNI 13-4729-1998
Legenda umum peta hidrogeologi Indonesia skala 1: 250.000
General legend of hydrogeology maps of Indonesia scale 1: 250.000
22
SNI 13-4728-1998
Penyusunan peta geologi gunung api
Preparation of geological maps of volcanoes
19
SNI 13-4932-1998
Legenda umum peta geologi teknik Indonesia skala 1:100.000
General legend of technical geological maps of Indonesia, scale 1:100,000
25
SNI 13-6184-1999
Penyusunan peta anomali magnetik total laut skala 1 : 250.000
Preparation of marine total magnetic anomaly maps, scale 1:250.000
23
SNI 13-4727-1998
Penyusunan peta geologi kuarter
Preparation of quarter geological maps
21
SNI 13-4688-1998
Penyusunan peta sumber daya mineral, batubara dan gambut
Preparation of mineral, coal and peat resource maps
28
SNI 13-6608-2001
Penafsiran seismik pantul laut saluran tunggal
Interpretation of marine single channel reflection seismic
44
SNI 13-6182-1999
Legenda umum peta zona kerentanan gerakan tanah Indonesia skala 1:100.000
General legend of susceptibility zone map of land movements in Indonesia, scale 1:100.000
37
SNI 13-6499.1-2000
Penyusuan peta anomali magnet
Preparation of magnetic anomaly maps
11
SNI 13-6010-1999
Penyusunan peta seismotektonik
Preparation of seismotectonic maps
17
SNI 13-6482-2000
Angka parameter dalam estimasi potensi energi panas bumi
Parameter number on estimation of geothermal energy potention
SNI 13-6012-1999
Penyusunan peta sebaran sedimen permukaan dasar laut
Preparation of maps of sediments distribution on the surface of the bottom of the sea
23
SNI 13-6169-1999
Metode estimasi potensi energi panas bumi
Method for estimating the potential of geothermal energy
11
SNI 13-6499.2-2000
Penyusunan peta anomali gaya berat laut
Preparation of sea gravity anomaly maps
22
SNI 13-4691-1998
Penyusunan peta geologi
Preparation of geological maps
25
SNI 5015:2011
Pedoman pelaporan, sumberdaya, dan cadangan batubara
Guidelines of reporting, resources, and coal reserves
23
SNI 4726:2011
Pedoman pelaporan, sumberdaya, dan cadangan mineral
Guidelines of reporting, resources, and nimeral reserves
42
- 27 -
9
SNI 7963:2014
Pengamatan pasang surut
Observations of tidal
SNI 7964:2014
Prosedur pembangunan Continuously Operating Reference Station (CORS)
Procedure of Continuously Operating Reference Station (CORS) development
07.080
Biology. Botany. Zoology
Biologi. Ilmu tumbuh-tumbuhan. Ilmu hewan
SNI ISO/ASTM 51940:2015
Panduan dosimetri untuk program pelepasan serangga mandul (ISO ASTM 51940:2013, IDT)
Guide dosimetry for sterile insects release programs (ISO/ASTM 51940: 2013, IDT)
32
ISO/ASTM 51940:2013 IDT
07.100
Microbiology
Mikrobiologi
07.100.10
Mikrobiologi medis
Medical microbiology
SNI 7303:2009
Metode identifikasi bakteri Aeromonas Hydrophita secara biokimia
Biochemical identification methodes of Aeromonas Hydrophita
SNI 7305:2009
Metode Polymerase Chain Reaction (PCR) untuk identifikasi White Spot Syndrome Virus (WSSV) dan Invectious Hypodermal and Haematopoietic Necrosis Virus (IHHNV)
Polymerase Chain Reaction (PCR) method for White Spot Syndrome Virus (WSSV) and Invectious Hypodermal and Haematopoietic Necrosis Virus (IHHNV) identification
9
SNI 7307:2009
Metode Reverse Transcriptase (RT) - Polymerase Chain Reaction (RT-PCR) untuk identfikasi Taura Syndrome Virus (TSV) dan Yellow Head Virus (YHV)
Reverse Transcriptase (RT) - Polymerase Chain Reaction (RT-PCR) methods for Taura Syndrome Virus (TSV) and Yellow Head Virus (YHV) identification
7
07.100.20
Mikrobiologi air
13
Microbiology of water
SNI 03-3962-1995
Metode pengujian distribusi butir sedimen layang secara gravimetri dengan ayakan
Test method for light sediment grain distribution gravimetrically by sieves
SNI ISO 9308-1:2010
Kualitas air - Deteksi dan penghitungan bakteri Coliform dan Escherichia coli - Bagian 1: Metode filtrasi dengan membran
Water quality - Detection and enumeration of Escherichia coli and coliform bacteria -- Part 1: Membrane filtration method
16
ISO 9308-1:2000 Water quality -- Detection and enumeration of Escherichia coli and coliform bacteria -- Part 1: Membrane filtration method Translation SNI ISO 7899-2:2010
IDT Kualitas air - Deteksi dan penghitungan enterococci intestinal - Bagian 2: Metode filtrasi dengan membran
Water quality - Detection and enumeration of intestinal enterococci -- Part 2: Membrane filtration method
ISO 7899-2:2000 Water quality -- Detection and enumeration of intestinal enterococci -- Part 2: Membrane filtration method Translation SNI ISO 6461-2:2010
IDT Kualitas air - Deteksi dan penghitungan bakteri anaerob pereduksi sulfite pembentuk spora (Clostridia) - Bagian 2: Metode filtrasi dengan membran
Water quality - Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) -- Part 2: Method by membrane filtration
ISO 6461-2:1986 Water quality -- Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) -- Part 2: Method by membrane filtration Translation SNI ISO 17994:2011
IDT Kualitas air - Kriteria untuk menetapkan kesetaraan antara metode mikrobiologi
Water quality - Criteria for establishing equivalence between microbiological methods
ISO 17994:2004, Water quality - Criteria for establishing equivalence between microbiological methods Translation SNI ISO/TR 13843:2011
IDT Kualitas air - Pedoman validasi metode mikrobiologi
Water quality - Guidance on validation of microbiological methods
ISO/TR 13843:2000, Water quality - Guidance on validation of microbiological methods Translation
07.100.30
IDT
Mikrobiologi makanan
Food microbiology
SNI 01-4455-1998
Cara uji bakteri termofilik
Test method for thermophilic bacteria
13
SNI 7304:2009
Prosedur diagnosis penyakit viral secara histopatologik pada udang Penaeid
Histopathologic diagnosis procerure for viral diseases on shrimp Penaeid
22
SNI ISO 7932:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk enumerasi Bacillus cereus terduga – Teknik penghitungan koloni pada suhu 30 °C
Microbiology of food and animal feeding - Horizontal method for enumeration of Bacillus cereus - colony count technique at 30 ° C
42
Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations - Part 5: Specific rules for the prepaation of milk and milk products
41
Microbiology of food and animal feeding - Horizontal method for enumeration of coagulation-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker media
40
Microbiology of food and animal feeding - Horizontal method for enumeration of coagulation-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen media
42
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk enumerasi staphylococci koagulasi-positif (Staphylococcus aureus dan spesies lain) – Bagian 3: Deteksi dan teknik APM untuk jumlah yang rendah
Microbiology of food and animal feeding - Horizontal method for enumeration of coagulation-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and APM technique for low numbers
41
IDT Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi – Campylobacter spp. – Bagian 1: Metode deteksi
Microbiology of food and animal feeding - Horizontal method for detection and enumeration - Campylobacter spp. - Part 1: Method of detection
42
Microbiology of food and animal feeding - Horizontal method for the detection and enumeration of Escherichia coli - Most Likely Numbers Engineering (MLNE)
40
Microbiology of food and animal feeding - Guidelines for the preparation and production of culture media - Part 2: Practical Guidelines on performance testing of culture media
42
ISO 7932 IDT SNI ISO 6887-5:2012
Mikrobiologi bahan pangan dan pakan - Penyiapan contoh uji, suspensi awal, dan pengenceran desimal untuk pengujian mikrobiologi – Bagian 5: Aturan khusus untuk penyiapan susu dan produk susu
ISO 6887-5 IDT SNI ISO 6888-1:2012
Mikrobiologi bahan pangan dan pakan - Metoda horizontal untuk enumerasi staphylococci koagulasi-positif (Staphylococcus aureus dan spesies lain) – Bagian 1: Teknik menggunakan media Baird-Parker agar
ISO 6888-1 IDT SNI ISO 6888-2:2012
Mikrobiologi bahan pangan dan pakan - Metoda horizontal untuk enumerasi staphylococci koagulasi-positif (Staphylococcus aureus dan spesies lain) – Bagian 2: Teknik menggunakan media rabbit plasma fibrinogen agar
ISO 6888-2 IDT SNI ISO 6888-3:2012
ISO 6888-3 SNI ISO 10272-1:2012 ISO 10272-1 IDT SNI ISO 7251:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi Escherichia coli terduga – Teknik Angka Paling Mungkin (APM)
ISO 7251 IDT SNI ISO/TS 11133-2:2012
Mikrobiologi bahan pangan dan pakan - Pedoman penyiapan dan pembuatan media biakan — Bagian 2: Pedoman praktis pengujian kinerja media biakan
ISO/TS 11133-2 IDT
- 28 -
SNI ISO 7937:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk enumerasi Clostridium perfringens – Teknik penghitungan koloni
Microbiology of food and animal feeding - Horizontal method for enumeration of Clostridium perfringens - Colony count technique
42
ISO 7937 IDT SNI ISO 4831:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi koliform – Teknik Angka Paling Mungkin (APM)
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of coliforms - Most probable number technique
ISO 4831:2006 IDT SNI ISO 11290-1:2012
IDT Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi Listeria monocytogenes – Bagian 1: Metode deteksi
Microbiology of food and animal feeding - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1: Method of detection
42
Microbiology of food and animal feeding - Guidelines for the preparation and manufacture of culture media - Part 1: General guidelines of quality assurance in laboratory culture media preparation
42
Microbiology of food and animal feeding - General requirements and guidance for microbiological testing
42
Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination -- Part 1: General rules for the preparation of the initial suspension and decimal dilutions
32
Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations Part 4: Specific requirement for the preparation of fish and fishery products
18
Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations Part 3: Specific rules for the preparation of fish and fishery products
29
Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations - Part 1: General rules for the preparation of the initial suspension and decimal dilutions
22
ISO 11290-1 IDT SNI ISO/TS 11133-1:2012
Mikrobiologi bahan pangan dan pakan - Pedoman penyiapan dan pembuatan media biakan — Bagian 1: Pedoman umum jaminan mutu penyiapan media biakan di laboratorium
ISO/TS 11133-1 IDT SNI ISO 7218:2012
Mikrobiologi bahan pangan dan pakan - Persyaratan umum dan pedoman untuk pengujian mikrobiologi
ISO 7218 IDT SNI ISO 21528-1:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi Enterobacteriaceae – Bagian 1: Deteksi dan enumerasi menggunakan teknik APM dengan pra-pengayaan
ISO 21528-1 IDT SNI ISO 6887-4:2012
Mikrobiologi bahan pangan dan pakan – Penyiapan contoh uji, suspensi awal dan pengenceran desimal untuk pengujian mikrobiologi – Bagian 4: Aturan khusus untuk penyiapan produk lain selain susu dan produk susu, daging dan produk daging, dan ikan serta pro
ISO 6887-4 SNI ISO 6887-3:2012
IDT Mikrobiologi bahan pangan dan pakan – Penyiapan contoh uji, suspensi awal dan pengenceran desimal untuk pengujian mikrobiologi – Bagian 3: Aturan khusus untuk penyiapan ikan dan produk perikanan
ISO 6887-3 IDT SNI ISO 6887-1:2012
Mikrobiologi bahan pangan dan pakan – Penyiapan contoh uji, suspensi awal dan pengenceran desimal untuk pengujian mikrobiologi – Bagian 1: Aturan umum untuk penyiapan suspensi awal dan pengenceran desimal
ISO 6887-1 IDT SNI ISO 4832:2012
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi dan enumerasi koliform – Teknik perhitungan koloni
Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of coliforms - Colony-count technique
ISO 4832:2006 IDT SNI ISO 21527-1:2012
IDT Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk enumerasi kapang dan khamir – Bagian 1: Teknik perhitungan koloni pada produk dengan aktivitas air lebih besar dari 0,95
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds - Part 1: Colony count technique in products with water activity greater than 0,95
ISO 21527-1:2008 IDT SNI ISO 21527-2:2012
IDT Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk enumerasi kapang dan khamir – Bagian 2: Teknik perhitungan koloni pada produk dengan aktivitas air kurang dari atau sama dengan 0,95
Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of yeasts and moulds - Part 2: Colony count technique in products with water activity less than or equal to 0,95
ISO 21527-2:2008 IDT SNI ISO 6887-2:2012
IDT Mikrobiologi bahan pangan dan pakan – Penyiapan contoh uji, suspensi awal dan pengenceran desimal untuk pengujian mikrobiologi – Bagian 2: Aturan khusus untuk penyiapan daging dan produk daging
Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations - Part 2: Specific rules for the preparation of meat and meat products
37
ISO 6887-2 IDT SNI ISO 16140:2015
Mikrobiologi bahan pangan dan pakan - Protokol validasi metode alternatif (ISO 16140:2003, IDT)
Microbiology of food and feed - Protocol validation of alternative methods (ISO 16140: 2003, IDT)
76
SNI ISO/TS 21872-1:2015
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi Vibrio spp. berpotensi enteropatogenik - Bagian 1 : Deteksi Vibrio parahaemolyticus dan Vibrio cholera (ISO/TS 21872-1:2007, IDT)
Microbiology of food and feed - Horizontal method for the detection of Vibrio spp. potentially enteropathogenic - Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae (ISO / TS 21872-1: 2007, IDT)
28
SNI ISO/TS 21872-2:2015
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi Vibrio spp. berpotensi enteropatogenik - Bagian 2 : Deteksi spesies selain Vibrio parahaemolyticus dan Vibrio cholera (ISO/TS 21872-2:2007, IDT)
Microbiology of food and feed - Horizontal method for the detection of Vibrio spp. potentially enteropathogenic - Part 2: Detection of species other than Vibrio parahaemolyticus and Vibrio cholerae (ISO / TS 21872-2: 2007, IDT)
34
SNI ISO/TS 17728:2015
Mikrobiologi rantai pangan - Teknik pengambilan contoh untuk analisis mikrobiologis contoh bahan pangan dan pakan (ISO/TS 17728:2015, IDT)
Microbiology of the food chain - Mechanical sampling for microbiological analysis of food and feed samples of materials (ISO / TS 17 728: 2015, IDT)
24
SNI ISO 4833-1:2015
Mikrobiologi rantai pangan - Metode horizontal untuk enumerasi mikroorganisme - Bagian 1: Penghitungan koloni pada suhu 30 °C dengan teknik cawan tuang (ISO 4833-1:2013, IDT)
Microbiology of the food chain - Horizontal method for the enumeration of microorganisms Part 1: Calculation of colonies at 30 ° C with a cup engineering castings (ISO 4833-1: 2013, IDT)
17
SNI 8276:2015
Panduan standar iradiasi produk daging dan unggas olahan dalam kemasan untuk mengendalikan mikroorganisme patogen dan mikroorganisme lainnya (ASTM E2449 − 05 (Reapproved 2013), IDT)
Standard guide irradiation of meat and poultry products processed in the packaging for the control of pathogens and other microorganisms (ASTM E2449 - 05 (Reapproved 2013), IDT)
18
ASTM E2449 − 05 (Reapproved 2013) IDT SNI ISO 6579:2015
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi Salmonella spp. (ISO 6579:2002, Corr1:2004,dan Amd1:2007, IDT)
Microbiology of food and feed - Horizontal method for the detection of Salmonella spp. (ISO 6579: 2002, Corr1: 2004, and Amd1: 2007, IDT)
40
SNI ISO 18593:2015
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk teknik pengambilan contoh dari permukaan menggunakan cawan kontak dan swab (ISO 18593:2004, IDT)
Microbiology of food and feed - Horizontal methods for sampling techniques from surfaces using contact and swab cup (ISO 18 593: 2004, IDT)
15
- 29 -
SNI ISO/TR 6579-3:2015
Mikrobiologi rantai pangan - Metode horizontal untuk deteksi, enumerasi, dan serotyping Salmonella - Bagian 3 : Pedoman serotyping Salmonella spp. (ISO/TR 6579-3:2014, IDT)
Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping Salmonella spp. (ISO / TR 6579-3: 2014, IDT)
SNI ISO/TS 6579-2:2015
Mikrobiologi bahan pangan dan pakan - Metode horizontal untuk deteksi, enumerasi, dan serotyping Salmonella - Bagian 2 : Enumerasi dengan teknik Angka Paling Mungkin miniatur (miniaturized most probable number technique) (ISO/TS 6579-2:2012, IDT)
Microbiology of food and feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration techniques Most Likely miniature figures (miniaturized most probable number technique) (ISO / TS 6579-2: 2012, IDT)
28
SNI ISO 13307:2015
Mikrobiologi bahan pangan dan pakan - Tahap produksi primer - Teknik pengambilan contoh (ISO 13307:2013, IDT)
Microbiology of food and feed - primary production stage - sampling techniques (ISO 13307: 2013, IDT)
24
SNI ISO 11290-2:2015
Mikrobiologi bahan pangan dan pakan – Metode horizontal untuk deteksi dan enumerasi Listeria monocytogenes - Bagian 2: Metode enumerasi (ISO 11290-2:1998 dan Amd 1:2004, IDT)
Microbiology of food and feed - Horizontal method for detection and enumeration of Listeria monocytogenes - Part 2: enumeration method (ISO 11290-2: 1998 and Amd 1: 2004, IDT)
28
Microbiology of the food chain - Horizontal method for the enumeration of microorganisms Part 2: Calculation of colonies at 30 ° C with scattered cup technique (ISO 4833-2: 2013 and Cor 1: 2014, IDT)
20
8
ISO 11290-2:1998 dan Amd 1:2004 SNI ISO 4833-2:2015
IDT Mikrobiologi rantai pangan - Metode horizontal untuk enumerasi mikroorganisme - Bagian 2: Penghitungan koloni pada suhu 30 °C dengan teknik cawan sebar (ISO 4833-2:2013 dan Cor 1:2014, IDT)
- 30 -
11 11.040
HEALTH CARE TECHNOLOGY
TEKNOLOGI PERAWATAN KESEHATAN
Medical equipment
Peralatan medis
SNI ISO 9918-2008
Persyaratan keselamatan kapnometer untuk digunakan pada manusia
Safety requirement of capnometers use for human
33
ISO 9918, Safety requirement of capnometers use for human Translation SNI ISO 11193-2:2010
IDT Sarung tangan untuk pemeriksaan medis sekali pakai - Bagian 2: Spesifikasi untuk sarung tangan terbuat dari polivinil klorida (PVC)
Single-use medical examination gloves - Part 2: Specification for gloves made from polyvinyl chloride
ISO 11193-2:2006 Translation SNI ISO 11193-1:2010
IDT Sarung tangan untuk pemeriksaan medis sekali pakai - Bagian 1: Spesifikasi untuk sarung tangan terbuat dari lateks atau larutan karet
Single-use medical examination gloves - Part 1: Sepcification for gloves made from rubber latex or rubber solution
ISO 11193-1;2008 Translation SNI ISO 15747:2012
IDT Wadah plastik untuk injeksi intravena
Plastic containers for intravenous injection
ISO 15747:2010, IDT IDT SNI ISO 8638:2012
Implan kardiovaskular dan sistem ekstrakorporeal - Sirkuit darah ekstrakorporeal untuk hemodialiser, hemodiafilter dan hemofilter
Cardiovascular implants and extracorporeal systems - extracorporeal blood circuit for hemodialiser, hemodiafilter and hemofilter
ISO 8638:2010, IDT IDT SNI IEC/TR 61948-1:2012
Instrumentasi kedokteran nuklir - Uji rutin - Bagian 1: Sistem pencacahan radiasi
Nucreal medicine instrumentation - Routine test - Part 1: Radiation counting system
IEC / TR 61948-1:2001 IDT SNI IEC/TR 61948-3:2012
IDT Instrumentasi kedokteran nuklir - Uji rutin - Bagian 3: Tomografi emisi positron
Nucreal medicine instrumentation - Routine test - Part 3: Positron emission tomographs
IEC / TR 61948-3:2005 IDT SNI IEC 62467-1:2012
IDT Peralatan listrik medis - Instrumen dosimetri yang digunakan dalam brakiterapi - Bagian 1: Instrumen yang digunakan pada bilik ionisasi tipe sumur (well-type)
Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers
IEC 62467-1-4:2009 IDT SNI IEC 60789:2012
IDT Peralatan listrik medis - Karakteristik dan kondisi uji alat pencitraan radionuklida - Kamera gamma tipe Anger
Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras
IEC 60789:2010 IDT SNI IEC/TR 61948-2:2012
IDT Instrumentasi kedokteran nuklir - Uji rutin - Bagian 2: Kamera sintilasi dan pencitraan single photon emission computed tomography (SPECT)
Nucreal medicine instrumentation - Routine test - Part 2: Scintillation cameras and single photon emission computed tomography imaging
IEC / TR 61948-2:2001 IDT SNI IEC 80601-2-35:2012
IDT Peralatan elektromedik - Bagian 2-35: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial alat pemanas yang menggunakan selimut, alas atau matras dan yang dimaksudkan untuk pemanas dalam penggunaan medis
Medical electrical equipment - Part 2-35: Particular requirements for basic safety and essential performance of heating devices using blankets, mats or mattresses and intended for heating in medical use
IEC 80601-2-35:2009, IDT IDT SNI ISO 8536-4:2012
Peralatan infus untuk pemakaian medik - Bagian 4: Set infus sekali pakai, berdasarkan gravitasi
Infusion equipment for medical use - Part 4: disposable infusion sets, based on gravity
ISO 8536-4:2010, IDT IDT SNI 7848:2013
Penyelenggaraan demostration activity (DA) REDD+
Execution of demostration activity (DA) REDD+
SNI IEC 60613:2012
Karakteristik kelistrikan dan pembebanan pada rakitan tabung sinar-X untuk diagnosis medik
Electrical and loading characteristics of X-ray tube assemblies for medical diagnosis
IEC 60613:2010 IDT SNI ISO 22413:2012
IDT Set transfer untuk sediaan farmasi - Persyaratan dan metode uji
Set transfer for pharmaceutical preparations - Requirements and test methods
ISO 22413:2010, IDT IDT SNI IEC 60601-1-2:2012
Peralatan elektromedik - Bagian 1-2: Persyaratan umum untuk keselamatan dasar dan kinerja esensial - Standar kolateral: elektromagnetik - Persyaratan dan pengujian
Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic compability - Requirements and testing
IEC 60601-1-2:2007, IDT IDT SNI ISO 27427:2016
Peralatan anestesi dan respirasi - Sistem nebulasi dan komponennya ISO 27427:2013 ed 3.0, IDT)
Anaesthetic and respiratory equipment -- Nebulizing systems and components (ISO 27427:2013 ed 3.0, IDT)
ISO 27427:2013 ed 3.0 IDT SNI ISO 9170-1:2012
Unit terminal untuk sistem pemipaan gas medik - Bagian 1: Unit terminal yang digunakan dengan gas medik bertekanan dan vakum
Terminal units for medical gas pipeline systems - Part 1: Terminals unit for use with compressed medical gases and vacuum
ISO 9170-1:2008, IDT IDT SNI ISO 80601-2-56:2012
Peralatan elektromedik - Bagian 2-56: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial termometer klinis pengukur tempratur badan
Elektromedik equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers measure body tempratur
ISO 80601-2-56:2009, IDT IDT SNI ISO 81060-2:2012
Tensimeter non-invasif - Bagian 2: Validasi klinis tipe pengukuran otomatis
ISO 81060-2:2009 dan ISO 81060-2:2009 Corr.1: 2011, IDT IDT
- 31 -
Non-invasive sphygmomanometers - Part 2: Clinical Validation of automated measurement type
61
SNI IEC 60601-2-17:2012
Peralatan listrik medis - Bagian 2-17: Persyaratan khusus untuk keselamatan peraltan kendali otomatis afterloading brakiterapi
Medical electrical equipment - Part 2-17: Particular requirements for the basic safety of automatically-controlled brachtherapy afterloading equipment
IEC 60601-2-17:2010 IDT
IDT
SNI IEC 60601-2-43:2012
Peralatan listrik medis - Bagian 2-43: Persyaratan khusus untuk keselamatan dasar dan kinerja penting pada perlengkapan sinar-X untuk prosedur intervensional
Medical electrical equipment - Part 2-43: Particular requirements for the basic safety and essential performance of X-ray equipment for interventional procedures
IEC 60601-2-43:2010 IDT
IDT
SNI IEC 60522:2012
Penentuan filtrasi permanen untuk rakitan tabung sinar-X
Determination of the permanent filtration of X-ray tube assemblies
IEC 60522:1999 IDT
IDT
SNI IEC/TR 60930:2016
Pedoman untuk petugas penatalaksanaan dan paramedis yang berhubungan dengan keselamatan penggunaan peralatan elektromedik dan sistem elektromedik (IEC/TR 60930:2008 ed 2.0, IDT)
Guidelines for administrative, medical and nursing staff concerned with the safe use of medical electrical equipment and medical electrical systems (IEC/TR 60930:2008 ed 2.0, IDT)
32
IEC/TR 60930:2008 ed 2.0 IDT SNI IEC/TR 61948-4:2012
Instrumentasi kedokteran nuklir - Uji rutin - Bagian 4: Kalibrator radionuklida
Nucreal medicine instrumentation - Routine test - Part 4: Radionuclide calibrators
IEC / TR 61948-4:2006 IDT
11.040.01
IDT
Peralatan medis secara umum
SNI 16-6646-2002
Medical equipment in general
Spesifikasi timbangan bayi
Specification for baby weighing machines
10
BS 1887 : 1996 Specification .for person weighing machines and height-measuring equipmentfor hospital, welfare and health services Translation SNI IEC 60601-2-28:2009
MOD Peralatan listrik medik - Bagian 2-28: Persyaratan khusus untuk keselamatan rakitan sumber sinar-X dan rakitan tabung sinar-X untuk diagnostik
Medical electrical equipment - Part 2-28: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis (IEC 60601-228:1993, IDT)
IEC 60601-2-28 Medical electrical equipment - Part 2: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis Edition 1.0 (1993-03)Edition 1.0 (1993-03) Translation SNI IEC 60601-2-36:2009
IDT Peralatan listrik medik - Bagian 2-36: Persyaratan khusus untuk keselamatan alat induksi litotripsi ekstrakorporeal
Medical electrical equipment - Part 2-36: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy (IEC 60601-2-36:1997, IDT)
IEC 60601-2-36 Medical electrical equipment - Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy Edition 1.0 (1997-03) Translation
IDT
SNI IEC 60601-2-40:2009
Peralatan listrik medik - Bagian 2-40: Persyaratan khusus untuk keselamatan alat elektromiograf dan pemicunya
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment (IEC 60601-2-40:1998, IDT)
SNI ISO 81060-1:2009
Tensimeter non-invasif (non-invasive sphygmomanometers) - Bagian 1: Persyaratan dan metode uji untuk tipe pengukuran non-otomatis
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non automated measurement type
ISO 81060-1:2007 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non automated measurement type Translation SNI IEC 60601-2-5:2009
IDT Peralatan listrik medik - Bagian 2-5: Persyaratan khusus untuk keselamatan peralatan fisioterapi ultrasonik
Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment (IEC 60601-2-5:2000, IDT)
IEC 60601-2-5 Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment Edition 2.0 (2000-07) Translation SNI IEC 60601-2-7:2009
IDT Peralatan listrik medik - Bagian 2-7: Persyaratan khusus untuk keselamatan pembangkit tegangan tinggi pesawat sinar-X diagnostik
Medical electrical equipment - Part 2-7: Particular requirements for the safety of highvoltage generators of diagnostic X-ray generators (IEC 60601-2-7:1998, IDT)
IEC 60601-2-7 Medical electrical equipment - Part 2-7: Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators Edition 2.0 (1998-02) Translation SNI ISO 14971:2015
IDT Alat kesehatan - Penerapan manajemen resiko pada alat kesehatan (ISO 14971:2007, IDT)
Medical devices - Application of risk management to medical devices (ISO 14971: 2007, IDT)
102
ISO 14971:2007 IDT SNI IEC/TR 60878:2014
Simbol grafis untuk peralatan elektrik pada praktek medis (IEC/TR 60878:2003, IDT)
Graphical symbols for electrical equipment in medical practice
IEC/TR 60878:2003 IDT SNI IEC/TR 61289:2016
Peralatan bedah frekuensi tinggi - Pengoperasian dan pemeliharaan (IEC/TR 61289:2011 ed 1.0, IDT)
High frequency surgical equipment - Operation and maintenance (IEC/TR 61289:2011 ed 1.0, IDT)
30
IEC/TR 61289:2011 ed 1.0 IDT SNI IEC 80601-2-60:2014
Peralatan elektromedik - Bagian 2-60: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial peralatan dental (IEC 80601-260:2012, IDT)
Electromedical equipment - Part 2-60: Particular requirements for basic safety and essential performance of dental equipment
IEC 80601-2-60:2012 IDT SNI 16-6655-2002
Spesifikasi timbangan balita, anak dan dewasa
Specification for children under five, children, and adult weighing machines
13
BS 1887 : 1996 Specification for person weighing machines and height-measuring equipmentfor hospital, welfare and health services MOD
11.040.10
Peralatan anaestesia, pernapasan dan menghidupkan
Anaesthetic, respiratory and reanimation equipment
SNI 16-4221-1996
Inkubator perawatan bayi
Baby incubators (nursing)
23
SNI 04-6191.2.4-1999
Peralatan elektromedik. Bagian 2.4: Persyaratan khusus untuk keselamatan defibrilator jantung dan monitor - Defibrilator jantung
Medical electrical equipment. Part 2.4: Particular requirements for the safety of cardiac defibrillators and cardiac defibrillator - Monitors
42
SNI 16-4940.1-1998
Alat hisap medik dengan sumber daya listrik
Electrically powered medical suction equipment
33
SNI 16-6637-2002
Konsentrator oksigen medik - Persyaratan keselamatan
Oxygen concentrators for medical use - Safety requirements
26
ISO 8359 : 1996 Oxygen concentrators for medical use - Safety requirements Translation
IDT
SNI 16-4940.2-1998
Alat hisap medik dengan sumber daya kevakuman dan tekanan
Medical suction equipment powered from vacuum or pressure sources
26
SNI 16-4775-1998
Alat isap medik manual
Manual respiratory equipment
19
SNI 16-6360-2000
Oksimeter pulsa penggunaan medik
Pulse oximeters for medical use
18
ISO 9919:1992 Pulse oximeters for medical use - Requirements Translation
MOD
- 32 -
SNI 16-6631-2002
Monitor oksigen pemantau campuran udara pernafasan pasien - Persyaratan keselamatan
Oxygen monitors for monitoring patient bretahing mixtures - Safety requirements
32
ISO 7767 : 1997 Oxygen monitors for monitoring patient breathing mixtures - Safety requirements Translation
MOD
SNI 16-4942-1998
Incubator transportasi
Transport incubator
35
SNI 16-6632-2002
Ventilator medik - Ventilator darurat dan transportasi
Ventilators for medical use - Emergency and transport ventilators
32
ISO 10651-3 ; 1997 Lung ventilators for medical use - Part 3 : Particular requirements for emergency and transport ventilators Translation SNI 16-6357.1-2001
MOD Mesin anestesia berventilator - Aspek keselamatan
Ventilated anaesthetic machines - Safety aspects
62
IEC 60601-2-13: 1998, Medical electrical equipment - Part 2-13: Particular requirements for the safety of anaesthetic machines Translation SNI 16-6357-2000
MOD Mesin anestesi untuk manusia
Anaesthetic machines for use with human
25
House care ventilator
40
ISO 5358:1992, Anaesthetic machines for use with humans Translation SNI 16-6356-2000
MOD Ventilator rawat rumah
ISO 10651-2:1996, Lung ventilators for medical use -- Part 2: Particular requirements for home care ventilators Translation SNI 16-6647-2002
MOD Resusitator untuk manusia
Resuscitators intended for use with humans
42
ISO 8382: 1988 Resuscitators intended for use with humans MOD SNI ISO 8836:2010
Kateter hisap untuk penggunaan pada saluran pernafasan
Suction catheters for use in the respiratory tract
ISO 8836:2007 Suction catheters for use in the respiratory trac Translation SNI ISO 8835-2-2008
IDT Sistem anestesi inhasi - Bagian 2 : Sistem pernapasan untuk orang dewasa
Inhalational anaesthesia systems -- Part 2: Anaesthetic breathing systems
28
ISO 8835-2, Inhalational anaesthesia systems -- Part 2: Anaesthetic breathing system Translation SNI ISO 5367:2009
IDT Slang pernapasan untuk pemakaian pada peralatan anestesi dan ventilator
Breathing tubes intended for use with anaesthetic apparatus and ventilators (ISO 5367:2000, IDT)
ISO 5367:2000 Breathing tubes intended for use with anaesthetic apparatus and ventilators Translation SNI ISO 10651-4:2016
IDT Ventilator paru - Bagian 4: Persyaratan khusus untuk resusitasi manual (ISO 10651-4:2002 ed 1.0, IDT)
Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002 ed 1.0, IDT)
30
ISO 10651-4:2002 ed 1.0 IDT SNI ISO 80601-2-13:2014
Peralatan elektromedik - Bagian 2-13: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial unit anestesi
Medical electrical equipment - Part 2-13: Particular requirements for the basic safety and essential performance of an anaesthethic workstation
ISO 80601-2-13:2011 IDT SNI ISO 80601-2-61:2014
Peralatan Elektromedik - Bagian 2-61: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial peralatan oksimeter pulsa (ISO 80601-2-61:2011, IDT)
Electromedical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61: 2011, IDT)
103
ISO 80601-2-61:2011 IDT SNI ISO 15002:2011
Alat ukur aliran pada penghubung ke unit terminal sistem pemipaan gas medis
Flow-metering devices for connection to terminal units of medical gas pipeline systems
27
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems Translation SNI IEC 62653:2014
IDT Pedoman keselamatan pengoperasian peralatan medis pada layanan hemodialisis
Guidelines for the safe operation of medical equipment used for haemodialysis treatment
IEC/TR 62653:2012 IDT SNI ISO 10651-5:2016
Ventilator paru untuk penggunaan medis - Persyaratan khusus keselamatan dasar dan kinerja esensial - Bagian 5: Resusitator darurat dengan tenaga gas (ISO 10651-5:2006 ed 1.0, IDT)
Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators (ISO 10651-5:2006 ed 1.0, IDT)
ISO 10651-5:2006 ed 1.0 IDT SNI IEC 60601-2-2:2014
Peralatan elektromedik - Bagian 2-2: Persyaratan khusus keselamatan dasar dan kinerja esensial untuk peralatan bedah frekuensi tinggi dan aksesorisnya
Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and essential performance of high frequency surgical equipment and high frequency surgical accessories
IEC 60601-2-2:2009 IDT SNI ISO 21969:2011
Penghubung fleksibel tekanan tinggi untuk digunakan pada sistem gas medis
High-pressure flexible connections for use with medical gas systems
ISO 21969:2009 High-pressure flexible connections for use with medical gas systems Translation SNI IEC 80601-2-30:2014
IDT Peralatan elektromedik - Bagian 2-30: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial tensimeter non invasive otomatis
Medical electrical equipment - Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
IEC 80601-2-30:2009 IDT SNI IEC 62353:2014
Peralatan elektromedik - Pengujian berkala dan pengujian setelah perbaikan pada peralatan elektromedik
Medical electrical equipment - Recurrent test and test after repair of medical equipment
IEC 62353:2007 IDT SNI IEC 60601-2-52:2014
Peralatan elektromedik - Bagian 2-52: Persyaratan khusus keselamatan dasar dan kinerja esensial tempat tidur pasien
Medical electrical equipment - Part 2-52: Particular requirements for the basic safety and essential performance of medical bed
IEC 60601-2-52:2009 IDT SNI IEC 60601-2-51:2014
Peralatan elektromedik - Bagian 2-51: Persyaratan khusus untuk keselamatan, termasuk kinerja esensial EKG perekam dan penganalisis kanal tunggal dan multikanal
IEC 60601-2-51:2003 IDT
- 33 -
Medical electrical equipment - Part 2-51: Particular requirements for the safety, including essential performance of recording and analysis single channel and multichannel electrocardiographs
61
SNI IEC 60601-2-20:2014
Peralatan elektromedik - Bagian 2-20: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial; inkubator infant transpor
Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transpor incubators
IEC 60601-2-20:2014 IDT SNI IEC 60601-2-19:2014
Peralatan elektromedik - Bagian 2-19: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial inkubator infant
Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
IEC 60601-2-19:2009 IDT SNI IEC 60601-1-1:2014
Peralatan elektromedik - Bagian 1-1: Persyaratan umum untuk keselamatan - Standar kolateral: Persyaratan keselamatan untuk sistem elektromedik
Medical electrical equipment - Part 1-1: Genereal requirements for safety - Collateral standard: Safety requirements for medical electrical systems
IEC 60601-1-1:2000 IDT SNI IEC 60601-1:2014
Peralatan elektromedik - Bagian 1: Persyaratan umum keselamatan dasar dan kinerja esensial
Medical electrical equipment - Part 1: General requirement for basic safety and essential performance
IEC 60601-1:2005 IDT SNI IEC 60513:2014
Aspek fundamental standar keselamatan untuk peralatan elektronika
Fundamental aspect of safety standards for medical electrical equipment
IEC 60513:2014 IDT SNI IEC 62354:2014
Prosedur pengujian umum untuk peralatan elektromedik
General testing procedures for medical electrical equipments
IEC 62354:2009 IDT
11.040.20
Peralatan transfusi, infus dan injeksi
Transfusion, infusion and injection equipment
SNI 16-2608-1992
Alat suntik sekali pakai (disposable syringe)
Disposable syringes
12
SNI 16-4774-1998
Alat transfusi untuk pemakaian medik - Alat pengambil darah
Transfusion equipment for medical use - Blood taking set
11
SNI 16-6642-2002
Gawai intravena bersayap steril sekali pakai untuk pemakaian medik umum
Medical equipment single use winged intravenous devices (sterile) for general medical use
57
AS/NZS 2485 : 1995 Medical Equipment Single use winged infra venous devices (sterile) for general medical use Translation
MOD
SNI 16-4776-1998
Alat suntik steril sekali pakai untuk insulin dengan atau tanpa jarum
Sterile single - use syringe, with or without needle for insuline
40
SNI 16-4774.3-2002
Alat transfusi untuk pemakaian medik - Bagian 3: Set transfusi sekali pakai
Transfusion equipment for medical use - Part 3: Transfusion sets for single use
26
ISO 1135-4 : 1998 Transfution equipment for medical use - Part 4 : transfusion sets for single use Translation SNI ISO 22413:2009
MOD Set transfer untuk kesediaan farmasi - Persyaratan dan metode uji
Transfer sets for pharmaceutical preparations -- Requirements and test methods
ISO 22413:2007 Transfer sets for pharmaceutical preparations -- Requirements and test methods Translation SNI ISO 8536-4:2009
IDT Peralatan infus untuk pemakaian medik - Bagian 4: Set infus sekali pakai, berdasarkan gravitasi
Infusion equipment for medical use -- Part 4: Infusion sets for single use, gravity feed
ISO 8536-4:2007 Infusion equipment for medical use -- Part 4: Infusion sets for single use, gravity feed Translation SNI ISO 21649:2009
IDT Penyuntik tanpa jarum untuk penggunaan medik - Persyaratan dan metode uji
Needle-free injectors for medical use -- Requirements and test methods
ISO 21649:2006 Needle-free injectors for medical use -- Requirements and test methods Translation SNI ISO 15747:2009
IDT Wadah plastik untuk injeksi intravena
Plastics containers for intravenous injection (ISO 15747:2003, IDT)
ISO 15747:2003 Plastics containers for intravenous injection Translation SNI ISO 6710:2010
IDT Wadah sekali pakai penampung spesimen darah vena
Single-use containers for venous blood specimen collection
ISO 6710:1995 Single-use containers for venous blood specimen collection Translation SNI ISO 28620:2011
IDT Alat kesehatan - Alat infus portabel yang diatur secara non-elektrik
Medical devices - Non-electrically driven portable infusion devices
14
Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers (IEC 60601-2-24:2012 ed 2.0, IDT)
68
Single-use sterile infusion sets for general medical
65
ISO 28620:2010 Medical devices - Non-electrically driven portable infusion devices Translation SNI IEC 60601-2-24:2016
IDT Peralatan elektromedik - Bagian 2-24: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial pompa infus dan pengontrolnya (IEC 60601-2-24:2012 ed 2.0, IDT)
IEC 60601-2-24:2012 ed 2.0 IDT SNI 16-6654-2002
Set infus steril sekali pakai untuk pemakaian medik umum
AS 2385 - 1990 Single use (sterile) infusion sets for general medical use MOD
11.040.25
Alat suntik, jarum suntik dan kateter
Syringes, needles and catheters
SNI 16-4223-1996
Kateter isap saluran napas
Suction catheters for use in respiratory tract
SNI 16-6355.4-2000
Kateter intravaskuler sekali pakai, steril - Kateter dilatasi balon
Steril, single-use intravascular catheters - Ballon dilatation catheters
11 7
ISO 10555-4:1996, Sterile, single-use intravascular catheters - Part 4: Ballon dilatation catheters MOD SNI 16-4777-1998
Kateter saluran kemih steril sekali pakai untuk penggunaan medik umum
Single use wethral catheters ( sterile ) for general use
31
SNI 16-6355.5-2000
Kateter intravaskuler sekali pakai, steril - Kateter intravena
Steril, single-use intravascular catheters - Intravena catheters
11
ISO 10555-5:1996, Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters MOD SNI 16-6355.3-2000
Kateter intravaskuler sekali pakai, steril - Kateter vena sentral
Steril, single-use intravascular catheters - Central venous catheters
6
ISO 10555-3:1996, Sterile, single-use intravascular catheters - Part 3: Central venous catheters MOD SNI 16-6644-2002
Jarum hipodermik steril sekali pakai
Sterile hypodermic needles for single use
ISO 7864 : 1993, Sterile hypodermic needles for single use Translation
IDT
- 34 -
21
SNI 16-6359-2000
Kantong penampung urine - Persyaratan dan metode uji
Urine collection bags - Requirements and test methods
21
Steril, single-use intravascular catheters - General requirement
13
ISO 8669-2:1996, Urine collection bags MOD SNI 16-6355.1-2000
Kateter intravaskuler sekali pakai, steril - Persyaratan umum
ISO 10555-1:1996, Sterile, single-use intravascular catheters - Part 1: General requirements MOD SNI 16-6355.2-2000
Kateter intravaskuler sekali pakai, steril - Kateter angiografi
Sterile, single use intravascular catheters - Angiographic catheters
7
ISO 10555-2:1996, Sterile, single-use intravascular catheters - Part 2: Angiographic catheters IDT SNI ISO 8537:2009
Alat suntik steril sekali pakai, dengan atau tanpa jarum, untuk insulin
Sterile single-use syringes, with or without needle, for insulin
ISO 8537:2007 Sterile single-use syringes, with or without needle, for insulin Translation SNI 16-7009.1-2004
IDT Fiting konikal dengan ketirusan 6% (Luer) untuk alat suntik, jarum dan perlengkapan medik tertentu lain - Bagian 1: Persyaratan umum
Conical fitting with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements
13
Sterile hypodermic syringes for single use - Part 1: Syringes for manual use
31
ISO 594/1: 1986 Translation SNI 16-7010.1-2004
IDT Alat suntik hipodermik steril sekali pakai - Bagian 1: Untuk penggunaan manual
ISO 7886-1: 1993 Translation SNI ISO 10555-5:2010
MOD Kateter intravascular sekali pakai, steril – Bagian 5: Kateter peripheral overneedle
Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters
ISO 10555.5:2010 Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters Translation SNI ISO 7886-4:2009
IDT Alat suntik hipodermik steril sekali pakai - Bagian 4: Alat suntik dengan fitur pencegahan ulang
Sterile hypodermic syringes for single use -- Part 4: Syringes with re-use prevention feature
ISO 7886-4:2006 Sterile hypodermic syringes for single use -- Part 4: Syringes with re-use prevention feature Translation SNI ISO 7886-3:2009
IDT Alat suntik hipodermik steril sekali pakai - Bagian 3: Alat suntik rusak otomatis untuk imunisasi dosis tetap
Sterile hypodermic syringes for single use -- Part 3: Auto-disable syringes for fixed-dose immunization
ISO 7886-4:2006 Sterile hypodermic syringes for single use -- Part 3: Auto-disable syringes for fixed-dose immunization Translation SNI 16-7010.2-2004
IDT Alat suntik hipodermik steril sekali pakai - Bagian 2: Digunakan bersama dengan pompa alat suntik berdaya listrik
Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps
34
ISO 7886-2: 1993 Translation SNI ISO 10555-1:2010
MOD Kateter intravascular sekali pakai, steril - Bagian 1: Persyaratan umum
Sterile, single-use intravascular catheters - Part 1: General requirements
ISO 10555.1:1995 Sterile, single-use intravascular catheters -- Part 1: General requirements Translation
11.040.30
IDT
Alat bedah dan bahan
Surgical instruments and materials
SNI 16-3366-1994
Benang operasi serap hologen sekali pakai
Disposable hologen absorbable sutures
SNI 16-3346-1994
Benang operasi tanserap sekali pakai
Non - absorbable sutures
SNI 16-4945-1998
Plester perekat elastik untuk bedah
Elastic adhesive tapes for surgery
13
SNI 16-6643-2002
Kasa penutup bedah - Kemasan sekali pakai
Surgical dressings - Single use package gauze
13
8 6
AS 4369-1996, Australian Surgical dressing - Part 3: Single use packing gauze Translation
MOD
SNI 16-4944-1998
Gunting bedah
Surgical scissors
SNI 16-4778-1998
Persyaratan khusus keamanan peralatan bedah frekuensi tinggi
Particular requirements for the safety of high frequency surgical equipment
30
SNI ISO 10936-2-2008
Mikroskop operasi - Bagian 2 : Bahaya radiasi cahaya dari mikroskope operasi yang digunakan dalam bedah okular
Optic and optical instruments - Operation microscope - Part 2 : Light hazard from operation microscopes used in ocular surgery
15
7
ISO 10936-2, Optic and optical instruments - Operation microscope - Part 2 : Light hazard from operation microscopes used in ocular surgery Translation SNI ISO 10936-1-2008
IDT Mikroskop operasi - Bagian 1 : Persyaratan dan metode uji
Microscope for surgery - Part 1 : Specification and test method
8
ISO 10936-1, Microscope for surgery - Part 1 : Specification and test method Translation
11.040.40
IDT
Penanaman untuk pembedahan prostata dan ortotik
Implants for surgery, prosthetics and orthotics
SNI 16-6073-1999
Sirkuit darah ekstra korporeal hemodialiser, hemofilter dan hemokonsentrator
Extra corporeal blood circuit haemodialysers, haemofilters and haemoconcentrators
SNI 16-4938-1998
Pelat penyambung tulang dari baja tahan karat
Stainless steel implant plate
SNI 16-6636-2002
Implan kardiovaskuler dan organ artifisial - Penukar gas-darah (oksigenator)
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators)
15
31
16 7
ISO 7199:1996, Cardiovascular Implants and artificial organs- Blood-gas exchangers (oxygenators) Translation
MOD
SNI 16-6071-1999
Hemodialiser, hemofilter dan hemokonsentrator
Haemodialysers, haemofilters and haemoconcentrators
SNI ISO 14243-1:2009
Implan untuk pembedahan - Keausan prostesis persendian tulang lutut total Bagian 1: Pembebanan dan parameter perpindahan untuk mesin pengujian keausan dengan pengendali beban dan persyaratan lingkungan untuk pengujian
Implants for surgery -- Wear of total knee-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test (ISO 14243-1:2002, IDT)
ISO 14243-1:2002 Implants for surgery -- Wear of total knee-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test Translation SNI ISO 14242-1:2009
IDT Implan untuk pembedahan - Keausan prostesis persendian tulang paha total * Bagian 1: Pembebanan dan parameter perpindahan untuk mesin pengujian-keausan dan kondisi lingkungan yang sesuai untuk pengujian
Implants for surgery -- Wear of total hip-joint prostheses - Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test (ISO 14242-1:2002, IDT)
ISO 14242-1:2002 Implants for surgery -- Wear of total hip-joint prostheses -- Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test Translation SNI ISO 14630:2010
IDT Implan bedah tidak aktif - Persyaratan umum
Non-active surgical implants - General requirements
ISO 14630:2008 Non-active surgical implants - General requirements Translation
IDT
- 35 -
SNI ISO 13959:2010
Air untuk hemodialisis dan terapi sejenis
Water for haemodialysis and related therapies
ISO 13959:2000 Water for haemodialysis and related therapies Translation SNI ISO 11663:2011
IDT Kualitas cairan dialis untuk hemodialisis dan terapi sejenis
Quality of dialysis fluid for haemodialysis and related therapies
ISO 11663:2009 Quality of dialysis fluid for haemodialysis and related therapies Translation SNI ISO 21534:2011
IDT Implan bedah non aktif - Implan pengganti sendi - Persyaratan khusus
Non-active surgical implants - Joint replacement implants - Particular requirements
ISO 21534:2007 Non-active surgical implants - Joint replacement implants - Particular requirements Translation SNI ISO 7199:2011
IDT Implan kardiovaskular dan organ tiruan - penukar gas darah (oksigenator)
Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators)
ISO 7199:2009 Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) Translation
11.040.50
IDT
Peralatan radiografi dan diagnosa lainnya
Radiographic and other diagnostic equipment
SNI 16-4286-1996
Unit fototerapi tipe bergerak
Moved type phototherapy unit
SNI 16-4415-1997
Sphygmomanometer/Tensimeter non otomatis
Sphygmomanometer/Un-automatic tensimeters
14
SNI 16-6638-2002
Peralatan sinar-X terapi julat pengoperasian 10 kV sampai dengan 1 MV Persyaratan keselamatan
Therapeutic X-ray equipment operating in the range 10 kV to 1 MV - Safety requirements
45
6
IEC 60601-2-8 : 1987+A.1 : 1997 Medical electrical equipment - Part 2-8 : Particular requirements for the safety of therapeutic X-ray equipment operating in the range 10kV to 1 MV Translation SNI 16-6657-2002
MOD Sarung tangan proteksi radiasi sinar - X
X - ray radiation protection gloves
8
JIS Z 4802:1991, X-ray protective glove Translation SNI IEC 60601-2-22:2010
MOD Peralatan listrik medik – Bagian 2-22: Persyaratan khusus untuk keselamatan dasar dan kinerja utama peralatan laser bedah, kosmetik, terapetik dan diagnostik
Medical electrical equipment – Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
IEC 60601-2-22:2007, Medical electrical equipment – Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment Translation SNI IEC 61675.3:2008
IDT Alat pencitraan radionuklida - Karakteristik dan syarat uji - Bagian 3: Sistem pencitraan seluruh tubuh berbasis kamera gamma
Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems
10
IEC 61675.3, Radionuclide imaging devices - Characteristics and test conditions - Part 3: Gamma camera based wholebody imaging systems Translation SNI IEC 60613:2015
IDT Karakteristik kelistrikan dan pembebanan rakitan tabung sinar-X untuk diagnosis medik (IEC 60613:2010, IDT)
The electrical characteristics and loading X-ray tube assemblies for medical diagnosis (IEC 60613: 2010, IDT)
22
Determination of the maximum symmetrical radiation field from X-ray tube rotary anode for diagnosis medic (IEC 60806: 1984, IDT)
16
Protective devices against X-ray radiation in medical diagnostics - Part 2: Protective Glass Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates
6
IEC 60613:2010 IDT SNI IEC 60806:2015
Penentuan medan radiasi simetrik maksimum dari tabung sinar-X anoda putar untuk diagnosis medic (IEC 60806:1984, IDT)
IEC 60806:1984 IDT SNI IEC 61331-2:2013
Alat pelindung terhadap radiasi sinar-X pada diagnostik medis – Bagian 2: Kaca pelindung Protective devices against diagnostic medical X-radiation Part 2: Protective glass plates
IEC 61331-2:1994 IDT SNI IEC 61262-1:2014
IDT Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik - Bagian 1: Penentuan ukuran medan masuk (IEC 612621:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 1: Determination of the entrance field size
IEC 61262-1:1994 IDT SNI IEC 61262-2:2014
Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik - Bagian 2: Penentuan faktor konversi (IEC 61262-2:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 2: Determination of the conversion factor
IEC 61262-2:1994 IDT SNI IEC 61262-3:2014
Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik - Bagian 3 : Penentuan distribusi pencahayaan dan ketidakseragaman pencahayaan (IEC 61262-3:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 3: Determination of the distribution of lighting and lighting unevenness
IEC 61262-3:1994 IDT SNI IEC 60601-2-27:2016
Peralatan elektromedik - Bagian 2-27: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial peralatan monitor elektrokardiografik (IEC 60601-2-27:2011 ed. 3.0, IDT)
Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment (IEC 60601-2-27:2011 ed. 3.0, IDT)
IEC 60601-2-27:2011 ed. 3.0 IDT SNI IEC 61262-4:2014
Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik - Bagian 4: Penentuan distorsi citra (IEC 61262-4:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 4: Determination of the image distortion
IEC 61262-4:1994 IDT SNI IEC/TR 61948-2:2014
Instrumentasi kedokteran nuklir - Uji rutin - Bagian 2: Kamera pendaran dan pencitraan tomografi terkomputasi emisi foton tunggal (single photon emission computed tomography, SPECT) (IEC/TR 61948-2:2001, IDT)
Nuclear medicine instrumentation - Routine tests - Part 2: Camera luminescence imaging and single photon emission computed tomography (single photon emission computed tomography
IEC/TR 61948-2:2001 SNI IEC 61262-5:2014
IDT Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik – Bagian 5: Penentuan efisiensi deteksi kuantum (IEC 612625:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 5: Determination of the quantum detection efficiency
IEC 61262-5:1994 IDT SNI IEC/TR 61948-1:2014
Instrumentasi Kedokteran Nuklir - Uji Rutin - Bagian 1: Sistem pencacahan radiasi (IEC/TR 61948-1:2001, IDT)
IEC/TR 61948-1:2001 IDT
- 36 -
Nuclear Medicine Instrumentation - Routine tests - Part 1: System enumeration radiation
82
SNI IEC 61262-6:2014
Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik – Bagian 6: Penentuan perbandingan kontras dan indeks selubung cahaya (IEC 61262-6:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 6: Determination of contrast ratio and a light veil index
IEC 61262-6:1994 IDT SNI IEC 61262-7:2014
Karakteristika elektro optik penguat citra sinar-X pada peralatan elektromedik - Bagian 7: Penentuan fungsi transfer modulasi (IEC 612627:1994, IDT)
Electro-optic characteristics A X-ray image amplifier in elektromedik equipment - Part 7: Determination of the modulation transfer function
IEC 61262-7:1994 IDT SNI IEC 60580:2015
Perangkat elektromedik - Pengukur dose area product (IEC 60580:2000, IDT)
Electromedical devices - Gauges dose area product (IEC 60580: 2000, IDT)
35
Evaluation and routine testing in the field of medical imaging - Part 1: general aspects (IEC 1223-1: 1993, IDT)
24
Electromedical devices - X-ray tube assemblies for medical diagnosis - Characteristics of focal point (IEC 60336: 2005 / Cor1: 2006, IDT)
40
IEC 60580:2000 IDT SNI IEC 1223-1:2015
Evaluasi dan pengujian rutin dalam bidang pencitraan medik - Bagian 1: Aspek umum (IEC 1223-1:1993, IDT)
IEC 1223-1:1993 IDT SNI IEC 60336:2015
Perangkat elektromedik - Rakitan tabung sinar-X untuk diagnosis medik Karakteristika titik focus (IEC 60336:2005/Cor1:2006, IDT)
IEC 60336:2005/Cor1:2006 IDT
11.040.55
Peralatan diagnostik
Diagnostic equipment
SNI 16-4941-1998
Termometer klinik berselubung
Enclosed-scale clinical thermometers
15
SNI 16-6361-2000
Elektroensefalograf
Electroencephalographs
15
IEC 60601-2-26:1994, Medical electrical equipment Part 2: Particular requirements for the safety of electroencephalographs Translation SNI 16-6639-2002
MOD Laser diagnostik dan terapi - Persyaratan keselamatan
Diagnostic and therapeutic laser equipment - Safety requirements
29
ISO 601-2-22 : 1995 Medical electrical equipment - Part 2 : particular requirements for the safety of diagnostic and therapeutic laser equipment Translation
IDT
SNI 16-6362-2000
Peralatan endoskopi
Endoscopic equipment
SNI ISO 19001:2009
Alat kesehatan diagnostik in vitro - Informasi yang disertakan oleh produsen pada reagensia in vitro untuk pewarnaan biologi
In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2002, IDT)
24
ISO 19001:2002 In vitro diagnostic medical devices -- Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology Translation SNI IEC 60601-2-47:2014
IDT Peralatan elektromedik - Bagian 2-47: Persyaratan khusus untuk keselamatan dasar dan kinerja esensial sistem elektrokardiografis ambulatori (IEC 60601-2-47:2012, IDT)
Electromedical equipment - Part 2-47: Particular requirements for basic safety and essential performance of ambulatory electrocardiographic systems
IEC 60601-2-47:2012 IDT
11.040.60
Peralatan terapi
SNI 04-6284.2-2000
Therapy equipment
Peralatan listrik untuk medik. Bagian 2: Persyaratan khusus untuk keselamatan pada peralatan terapi gelombang pendek
Medical electrical equipment. Part 2: Particular requirements for the safety of short-wave therapy equipment
18
IEC 601-2-3: 1982, Medical electrical equipment - Part 2: Particular requirements for the safety of short-wave therapy equipment Translation
IDT
SNI 16-4939-1998
Elektrokardiograf
Electrocardiographs
22
SNI 16-6155-1999
Peralatan terapi gelombang mikro
Microwave therapy equipment
15
SNI IEC/TR 61859:2014
Panduan untuk desain ruang tindakan radioterapi (IEC/TR 61859:1997, IDT)
Guidelines for the design of space action radiotherapy
IEC/TR 61859:1997 IDT SNI IEC 60601-2-17:2015
11.040.70
Perangkat elektromedik - Bagian 2-17: Persyaratan khusus untuk keselamatan dasar dan kinerja utama dari perangkat afterloading brakiterapi dengan kendali otomatis (IEC 60601-2-17:2013, IDT)
Peralatan kedokteran mata
SNI ISO 11978:2010
Medical electrical equipment - Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment (IEC 60601-2-17:2013, IDT)
79
Ophthalmic equipment
Optik oftalmik – Lensa kontak dan produk perawatan lensa kotak – Informasi yang disediakan oleh pabrikan
Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer
ISO 11978:2010 Ophthalmic optics -- Contact lenses and contact lens care products -- Information supplied by the manufacturer Translation SNI ISO 8612:2012
IDT Peralatan optalmik - Tonometer
Ophthalmic equipment - a tonometer
ISO 8612:2009 IDT
11.060
Dentistry
Kedokteran gigi
SNI ISO 21987:2012
Optik optalmik - Lensa kacamata terpasang
Ophthalmic optics - lenses mounted goggles
ISO 21987:2009, IDT IDT SNI ISO 7885:2012
Kedokteran gigi - Jarum suntik steril sekali pakai
Dentistry - Sterile Disposable Syringes
ISO 7885:2010, IDT IDT
11.060.10
Bahan gigi
Dental materials
SNI 16-3598-1994
Syarat mutu dan cara uji malam lempeng basis untuk kedokteran gigi
Dental base plate wax, Spesification and test methods
4
SNI 16-3367-1994
Logam paduan cor logam dasar untuk kerangka gigi tiruan
Dental base metal casting alloys for dental immitation frame
8
SNI 16-3368-1994
Logam paduan untuk amalgam penambal gigi
Dentistry-alloys for dental amalgam
7
11.060.20
Peralatan kedokteran gigi
Dental equipment
SNI 16-3599-1994
Syarat mutu dan cara uji bahan tanam dengan pengikat gips untuk pengecoran logam paduan emas dalam kedokteran gigi
Dental gypsum bonded casting instruments for gold alloys, Specification and test method
SNI 16-2632-1992
Unit kedokteran gigi
Dental unit
SNI 16-4222-1996
Lampu perawatan gigi
Dental operating lights
- 37 -
20 9 18
SNI 16-2633-1992
Kursi pasien kedokteran gigi
Dental chairs
14
SNI 16-6634.1-2002
Henpis bor gigi - Bagian 1 : Henpis turbin-udara kecepatan tinggi
Dental handpieces - Part 1: High speed air turbine handpieces
13
ISO 7785-1 : 1992, Dental handpieces - Part 1 : High speed air turbine handpieces Translation SNI 16-6645.2-2002
MOD Kuret periodental, skeler dan ekskavator gigi - Bagian 2 : Kuret periodental Tipe Gr
Periodental curretes dental scalers and excavators - Part 2: Periodontal curretes - Gr type
8
ISO 13397-2:1996 Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curretes - Gr type Translation SNI 16-6645.4-2002
MOD Kuret periodental, skeler dan ekskavator gigi - Bagian 4 : Ekskavator gigi Tipe diskoid
Periodontal curettes, dental scalers and exavators - Part 4: Dental excavators - Discoid type
10
ISO 13397-4:1997, Periodontal curettes, dental scalers and excavators - Part 4: Dental excavators - Discoid-type MOD SNI 16-6645.1-2002
Kuret periodental, skeler dan ekskavator gigi - Bagian 1 : Persyaratan umum
Periodental curettes, dental scalers and excavators - Part 1: General requirements
9
ISO 13397-1:1996 Periodontal curettes, dental scalers and excavators - Part 1: General requirements Translation SNI 16-6635-2002
MOD Kursi operator gigi
Dental operator's tools
11
Dental handpieces - Part 2: Straight and geared angle handpieces
16
Periodental curettes, dental scalers and excavators - Part 3: Dental scalers - H type
11
ISO 7493 : 1977 Dental operator's tool Translation SNI 16-6634.2-2002
MOD Henpis bor gigi - Bagian 2 : Henpis lurus dan bersudut
ISO 7785-2 : 1995, Dental handpieces - Part 2 : Straight and geared angle handpieces Translation SNI 16-6645.3-2002
MOD Kuret periodental, skeler dan ekskavator gigi - Bagian 3 : Skeler gigi - Tipe H.
ISO 13397-3:1996 Periodontal curettes, dental scalers and excavators - Part 3: Dental scalers-H-type Translation SNI ISO 7494-2:2009
MOD Kedokteran gigi - Dental unit - Bagian 2: Suplai air dan udara
Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003, IDT)
ISO 7494-2:2003 Dentistry -- Dental units -- Part 2: Water and air supply Translation SNI ISO 7494-1:2009
IDT Kedokteran gigi - Dental unit - Bagian 1: Persyaratan umum dan metode pengujian
Dentistry - Dental units - Part 1: General requirements and test methods (ISO 74941:2004, IDT)
ISO 7494-1:2004 Dentistry -- Dental units -- Part 1: General requirements and test methods Translation SNI ISO 7493:2009
IDT Kedokteran gigi - Kursi operator
Dentistry - Operator's stool
ISO 7493:2006 Dentistry - Operator's stool Translation SNI ISO 9168:2011
IDT Kedokteran gigi - Penghubung selang untuk henpis dental yang digerakkan oleh udara
Dentistry - Hose connectors for air driven dental handpieces
ISO 9168:2009 Dentistry - Hose connectors for air driven dental handpieces Translation
11.060.25
IDT
Instrumen peralatan kedokteran gigi
SNI 16-6641-2002
Dental instrument
Tang pencabut gigi - Tipe engsel sekrup dan engsel pasak
Dental extraction forceps - Screw and pin join types
30
ISO 9173 - 1 : 1991 (E) Dental extraction forceps - Part 1 : Screw and pin joint types Translation
11.080
MOD
Sterilization
Sterilisasi
SNI ISO 11135-1:2014
Sterilisasi produk kesehatan - Etilene oksida - Bagian 1: Persyaratan untuk pengembangan, validasi dan kontrol rutin proses sterilisasi untuk alat kesehatan (ISO 11135-1:2007, IDT)
Sterilization of health care products - Etilene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
ISO 11135-1:2007 IDT SNI ISO 11607-2:2014
Pengemasan alat kesehatan untuk terminally - Bagian 2: Persyaratan validasi untuk proses forming, sealing dan perakitan
Packaging for terminally medical devices - Part 2: Validation requirements for the process of forming, sealing and assembly
ISO 11607-2:2006 IDT
11.080.10
Peralatan sterilisasi
Sterilizing equipment
SNI 16-4285-1996
Pensteril air dengan sinar ultraviolet
Water sterilizers by ultraviolet rays
11
SNI 16-4284-1996
Pensteril ruangan ultraviolet tipe bergerak
Moved type ultraviolet room sterilizers
10
SNI 16-3770-1995
Sterilisator uap
Steam sterilizers
11.100
Laboratory medicine
Ilmu kedokteran laboratorium
11.100.10
Sistem pengujian diagnostik in vitro
SNI ISO 15198:2009
8
In vitro diagnostic test systems
Laboratorium klinik - Alat kesehatan diagnostik in vitro - Validasi prosedur kontrol mutu pengguna oleh produsen
Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer (ISO 15198:2004, IDT)
47
ISO 15198:2004 Clinical laboratory medicine -- In vitro diagnostic medical devices -- Validation of user quality control procedures by the manufacturer Translation SNI ISO 15197:2009
IDT Sistem uji diagnostik in vitro - Persyaratan untuk sistem pemantauan gula darah yang dapat melakukan pengujian sendiri dalam pengelolaan diabetes melitus
In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003, IDT)
ISO 15197:2003 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus Translation
IDT
11.100.20 SNI ISO 10993-13:2015
Evaluasi biologis alat kesehatan - Bagian 13: Identifikasi dan kuantifikasi produk degradasi alat kesehatan polimer (ISO 10993-13:2010, IDT)
ISO 10993-13:2010 IDT
- 38 -
Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products of polymeric medical devices (ISO 10993-13: 2010, IDT)
22
SNI ISO 10993-1:2015
Evaluasi biologis alat kesehatan - Bagian 1: Evaluasi dan pengujian dalam proses manajemen resiko (ISO 10993-1:2009, IDT)
Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO 10993-1: 2009, IDT)
31
Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9: 2010, IDT)
17
Biological evaluation of medical devices - Part 5: Test the in vitro cytotoxicity (ISO 10993-5: 2009, IDT)
44
Biological evaluation of medical devices - Part 16: Design studies and luluhan toksikokinetik degradation products (ISO 10993-16: 2010, IDT)
20
Non-active surgical implants - general Peryaratan (ISO 14630: 2013, IDT)
22
Medical devices - Symbols used on labels, labeling and information of medical devices Part 1: Requirements (ISO 15223-1: 2012, IDT)
28
ISO 10993-1:2009 IDT SNI ISO 10993-9:2015
Evaluasi biologis alat kesehatan - Bagian 9: Kerangka kerja untuk identifikasi dan kuantifikasi produk degradasi potensial (ISO 10993-9:2010, IDT)
ISO 10993-9:2010 IDT SNI ISO 10993-5:2015
Evaluasi biologis alat kesehatan - Bagian 5: Uji sitotoksisitas secara in vitro (ISO 10993-5:2009, IDT)
ISO 10993-5:2009 IDT SNI ISO 10993-16:2015
Evaluasi biologis alat kesehatan - Bagian 16: Desain studi toksikokinetik produk degradasi dan luluhan (ISO 10993-16:2010, IDT)
ISO 10993-16:2010 IDT SNI ISO 14630:2015
Implan bedah tidak aktif - Peryaratan umum (ISO 14630:2013, IDT)
ISO 16430:2012 IDT SNI ISO 15223-1:2015
Alat kesehatan - Simbol yang digunakan pada label, penandaan dan informasi alat kesehatan - Bagian 1: Persyaratan (ISO 15223-1:2012, IDT)
ISO 15223-1:2012 IDT
11.120
Pharmaceutics
Farmasi
11.120.10
Obat
Medicaments
SNI 16-0212-1987
Farmakope Indonesia
Indonesian Pharmacopheia
1031
SNI 16-0211-1987
Extra farmakope Indonesia
Indonesian Extra Pharmacopheia
1423
11.120.20
Bahan obat
Medical materials
SNI 16-0213-1987
Materia Medika Indonesia, Jilid I
Materia Medica Indonesia (simplicia), Vol. I
158
SNI 16-0214-1987
Materia Medika Indonesia, Jilid II
Materia Medica Indonesia (simplicia), Vol. II
8
SNI 16-0216-1987
Materia Medika Indonesia, Jilid IV
Materia Medica Indonesia (simplicia), Vol. IV
188
SNI 16-0215-1987
Materia Medika Indonesia, Jilid III
Materia Medica Indonesia (simplicia), Vol. III
187
11.120.99
Standar lainnya yang berkaitan dengan farmasi
SNI 8074:2014
11.140
Other standards related to pharmaceutics
Ekstrak albumin ikan gabus (Channa striata) – Syarat mutu dan pengolahan
Albumin extract catfish (Channa striata) - Quality requirements and processing
13
Hospital equipment
Peralatan rumah sakit
SNI 16-2630-1992
Meja bayi dari baja
Steel baby desks
SNI 16-2625-1992
Tempat tidur baja beroda untuk rumah sakit dengan pengatur posisi tidur
Reclining wheel steel beds for hospitals
SNI 16-2626-1992
Tempat tidur baja beroda untuk rumah sakit
Wheel steel beds for hospitals
7
SNI 16-2628-1992
Troli makanan dari baja
Steel food trolleys
6
SNI 16-2629-1992
Lemari baja beroda untuk pasien
Steel wheel cupboard for hospitals
SNI 16-2627-1992
Kereta dorong baja untuk pasien
Steel pushcarts for patients
SNI 16-2631-1992
Lemari instrumen atau obat dari baja
Steel instruments or medicines cupboards
11
SNI 16-2622-2002
Sarung tangan steril, sekali pakai untuk keperluan bedah
Single - use sterile surgical ruber gloves
14
Single-use rubber gloves for health examination
13
Operating tables - Safety requirements
16
6 10
13 7
ISO 10282:1994, Single-use sterile rubber surgical gloves - Specification Translation SNI 16-2623-2002
MOD Sarung tangan karet, sekali pakai untuk keperluan pemeriksaan kesehatan
ISO 11193: 1994 Single rubber examination gloves - Specification Translation SNI 16-6633-2002
MOD Meja operasi - Persyaratan keselamatan
ISO 10651-2-46 : 1998 Medical electrical equipment - Part 2-46 : Particular requirements for the safety of operating tables Translation
MOD
SNI 16-4770-1998
Perlak platik
Plastic sheeting
SNI 16-6072-1999
Kapas serap
Absorbent cotton
11
SNI 16-6649-2002
Meja sinar-X dan tempat berdiri untuk penggunaan medik
X-ray tables and stand point for medical use
13
6
JIS Z 4904: 1988, X-ray tables and stands for medical use Translation
MOD
SNI 16-4943-1998
Pembalut katun elastik
Elastic cotton bandages
SNI ISO 10282:2010
Sarung tangan karet steril, untuk keperluan bedah sekali pakai - Spesifikasi
Single-use sterile rubber surgical gloves - Specification
6
ISO 20282:2002 Translation
IDT
SNI 7372:2008
Meja periksa pasien konstruksi baja
Construction of inspection desks for patients
SNI ISO 22882:2011
Kastor dan roda - Persyaratan kastor untuk tempat tidur rumah sakit
Castors and wheels - Requirements for castors for hospital beds
11
ISO 22882:2004 Castors and wheels -- Requirements for castors for hospital beds Translation SNI 16-1001-1989
11.180 11.180.10
IDT Perlak karet untuk rumah sakit
Rubber sheet for hospital
Aids for disabled or handicapped persons
Pertolongan untuk orang tidak mampu atau orang cacat Pertolongan dan adaptasi untuk pergerakan
SNI 09-4663-1998
4
Aids and adaption for moving
Kursi roda
Wheel chairs
- 39 -
8
11.180.15
Pertolongan untuk orang tuli atau kurang pendengaran
Aids for deaf and hearing impaired people
SNI 16-2634-1992
Audiometer
Audiometers
22
SNI 16-2635-1992
Alat bantu dengar
Hearing aids
18
11.200
Birth control. Mechanical contraceptives
Keluarga berencana Kontraseptif mekanis
SNI 16-6640.1-2002
Alat kontrasepsi dalam rahim (AKDR) - Bagian 1 : Penetapan gaya putus
Intra uterine devices - Part 1: Determination of breaking force
6
ISO 7857-1:1983, Intra-uterine devices -Part 1: Determination of breaking force Translation SNI 16-2723-2003
MOD Kondoms lateks
Latex condoms
36
ISO 4074: 1996, Rubber condoms, part 1,2,3,5,6,7,9,10 Translation SNI 16-6640-2002
MOD Alat kontrasepsi dalam rahim (AKDR)
Intra - uterine contraceptives devices
8
Intra-uterine devices - Part 2: Recommendations for desinfection
6
Intra- uterine devices - Part 3: Packaging and handling
7
Technical report 7438, Technical Committee ISO/TC 157 Mechanical contraceptives-Intra-uterine device MOD SNI 16-6640.2-2002
Alat kontrasepsi dalam rahim (AKDR) - Bagian 2 : Persyaratan desinfeksi
ISO 7857/2 : 1983 (E) Infra - Uterine devices. Part 2 : Recommendation for disinfectan Translation SNI 16-6640.3-2002
IDT Alat kontrasepsi dalam rahim (AKDR) - Bagian 3 : Pengemasan dan penandaan
ISO 7857/3 : 1983, Intra - Uterine devices-Part 3 : Packaging and labeling Translation
MOD
- 40 -
13
ENVIRONMENT AND HEALTH PROTECTION. SAFETY
PERLINDUNGAN LINGKUNGAN DAN KESEHATAN. KESELAMATAN
13.020
Environment protection in general
Perlindungan lingkungan secara umum
SNI 8013:2014
Pengelolaan pariwisata alam
Management of natural tourism
SNI 8014:2014
Metode penilaian jasa lingkungan keanekaragaman hayati (biodiversity)
Assessment methods for environmental services of biodiversity
SNI 6597:2011
Uji statik pengidentifikasian sumber air asam tambang
Static test identifying sources of acid mine drainage
SNI 7742:2011
Pengelolaan air asam tambang
Management of mining acid liquid
16
SNI 7943:2014
Panduan konservasi tanah dan air untuk penanggulangan degradasi lahan
Soil and water conservation guidelines for the prevention of land degradation
14
SNI 8015:2014
Penilaian pengelolaan jasa lingkungan keanekaragaman hayati (biodiversity)
Assessment for environmental services of biodiversity
SNI IEC 62321:2015
Produk elektroteknik - Penentuan kadar enam unsur yang diregulasi (timbal, air raksa, kadmium, kromium heksavalen, bifenil polibrominat, eter ifenil polibrominat) (IEC 62321:2008, IDT)
Electrotechnical products - Determination of levels of six regulated elements (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated phenyl ethers) (IEC 62 321: 2008, IDT)
135
IEC 62321:2008 IDT
13.020.10
Pengendalian lingkungan
SNI ISO 14065:2009
Environmental management
Gas rumah kaca - Persyaratan bagi lembaga validasi dan verifikasi gas rumah kaca untuk digunakan dalam akreditasi atau bentuk pengakuan lainnya
Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
ISO 17000:2004 Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition Translation SNI ISO 14031:2009
IDT Manajemen lingkungan - Evaluasi kinerja lingkungan - Panduan
Environmental management -- Environmental performance evaluation -- Guidelines
ISO 14031:1999 Environmental management -- Environmental performance evaluation -- Guidelines Translation SNI 19-14001-2005
IDT Sistem manajemen lingkungan - Persyaratan dan panduan penggunaan
Environmental management systems - Requirements with guidance for use
32
Environmental management systems-General guidelines on principles, systems and support techniques
52
ISO 14001: 2004, Environmental management systems - Requirements with guidance for use Translation SNI 19-14004-2005
IDT Sistem manajemen lingkungan - Panduan umum tentang prinsip, sistem dan teknik pendukung
ISO 14004: 2004, Environmental management systems - General guidelines on principles, systems and support techniques Translation SNI IEC/TR 62235:2009
IDT Fasilitasi nuklir - Sistem instrumentasi dan kendal yang penting untuk keselamatan - Sistem penyimpanan sementara dan repositori akhir limbah dan bahan bakar nuklir bekas
Nuclear facilities - Instrumentation and control systems important to safety - System of interim storage and final repository of nuclear fuel and waste
IEC/TR 62235:2005 Nuclear facilities - Instrumentation and control systems important to safety - System of interim storage and final repository of nuclear fuel and waste Translation SNI ISO 19011:2012
IDT Panduan audit sistem manajemen
Guidelines for auditing management systems
ISO 19011:2011 (2011-11) IDT
IDT
SNI ISO 14001:2015
Sistem manajemen lingkungan - Persyaratan dan panduan penggunaan (ISO 14001:2015, IDT)
Environmental management systems - Requirements with guidance for use (ISO 14001: 2015, IDT)
47
Environmental management systems - Requirements with guidance for use (ISO 14001:2015, IDT)
74
Ecolabel criteria - Part 1: Category of paper products - Section 3: Paper coated and printed without multipurpose paper
15
ISO 14001:2015 IDT SNI ISO 14001:2015
Sistem manajemen lingkungan - Persyaratan dengan panduan penggunaan (ISO 14001:2015, IDT)
ISO 14001:2015 IDT SNI 7188.1.3:2016
13.020.40
Kriteria ekolabel - Bagian 1: Kategori produk kertas - Seksi 3 : Kertas cetak tanpa salut dan kertas multiguna
Polusi, pengendalian polusi dan konservasi termasuk ekotoksikologi
SNI ISO 14064-3:2009
Pollution, pollution control and conservation Including ecotoxicology
Gas rumah kaca - Bagian 3 : Spesifikasi dengan panduan untuk validasi dan verifikasi dari pernyataan gas rumah kaca
Green house gases - Part 3 : Specification with guidance for the validation and verification of greenhouse gas assertions
ISO 14064-3:2006 Green house gases - Part 3 : Specification with guidance for the validation and verification of greenhouse gas assertions IDT SNI ISO 14064-2:2009
Gas rumah kaca - Bagian 2 : Spesifikasi dengan panduan levelproyek untuk kuantifikasi dan pelaporan dari pengurangan emisi atau pertukaran gas rumah kaca
Greenhause gases - Part 2 : Specification with guidance at the project level for quantification and reporting of greenhouse gas emissions reductions or removal enhancement
ISO 14064-2:2006 Greenhause gases - Part 2 : Specification with guidance at the project level for quantification and reporting of greenhouse gas emissions reductions or removal enhancement IDT SNI ISO 14064-1:2009
Gas rumah kaca - Bagian 1 : Spesifikasi dengan panduan level organisasi untuk kuantifikasi dan pelaporan dari emisi dan penghilangan gas rumah kaca
Greenhause gases - Part 1 : Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
ISO 14064-1:2006 Greenhause gases - Part 1 : Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals Translation
13.020.50
IDT
Ekolabel
Ecolabelling
SNI 19-7188.3.1-2006
Kriteria ekolabel - Bagian 3: Kategori produk kulit - Seksi 1: Kulit jadi
Ecolabelling criteria - Part 3: Category of leather products - Section 1: Leather
SNI 7188.5.1:2010
Kriteria ekolabel - Bagian 5: Kategori produk baterai - Seksi 1: Baterai primer tipe carbon zinc dan alkaline
Ecolabelling criteria - Part 5: Categories product battery - Section 1: Primary Battery type carbon zinc and alkaline
SNI 7188.1.4:2010
Kriteria ekolabel - Bagian 1: Kategori produk kertas - Seksi 4: Kertas cetak salut
Ecolabelling criteria - Part 1: Categories of paper products - Section 4: Coated printing paper
SNI 19-7188.2.1-2006
Kriteria ekolabel - Bagian 2: Kategori produk deterjen - Seksi 1: Serbuk deterjen pencuci sintetik rumah tangga
Ecolabelling criteria - Part 2: Category of detergent products - Section 1: Household synthetic washing detergent powder
13
SNI 19-7188.4.1-2006
Kriteria ekolabel - Bagian 4: Kategori tekstil dan produk tekstil - Seksi 1: Umum
Ecolabelling criteria - Part 4: Category of textiles and textile products - Section 1: General
17
SNI 19-7188.1.3-2006
Kriteria ekolabel - Bagian 1: Kategori produk kertas - Seksi 3: Kertas cetak tanpa salut
Ecolabelling criteria - Part 1: Category of paper products - Section 3: Uncoated print paper
13
SNI 19-7188.3.2-2006
Kriteria ekolabel - Bagian 3: Kategori produk kulit - Seksi 2: Sepatu kasual
Ecolabelling criteria - Part 3: Category of leather products - Section 2: Casual shoes
15
SNI 19-7188.1.1-2006
Kriteria ekolabel - Bagian 1: Kategori produk kertas - Seksi 1: Kertas kemas
Ecolabelling criteria - Part 1: Category of paper products - Section 1: Wrapping paper
11
- 41 -
10
SNI ISO 14021:2009
Label lingkungan dan deklarasi - Klaim lingkungan swadeklarasi (pelabelan lingkungan Tipe II)
Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling)
ISO 14021:1999 Environmental labels and declarations -- Self-declared environmental claims (Type II environmental labelling) Translation
IDT
SNI 7188.6:2010
Kriteria ekolabel - Bagian 6: Kategori produk cat tembok
Ecolabelling criteria - Part 6: Categories of products wall paint
SNI 19-7188.1.2-2006
Kriteria ekolabel - Bagian 1: Kategori produk kertas - Seksi 2: Kertas tisu untuk kebersihan (sanitary tissue)
Ecolabelling criteria - Part 1: Category of paper products - Section 2: Sanitary tissue
SNI 7228.2:2011
Prasyarat ekolabel - Bagian 2: Cara uji organohalida yang dapat diabsorbsi (AOX) dalam air limbah secara microcoulometry
Ecolabelling prerequisite - Part 2: Test methods that can be absorbed organohalida (AOX) in waste water microcoulometry
SNI 7188.7:2011
Kriteria ekolabel - Bagian 7: Kategori produk kantong belanja plastik shopping bags products
Ecolabel criteria - Part 7: Category of plastic shopping bags products
SNI 7188.8:2013
Kriteria ekolabel - Bagian 8: Kategori produk ubin keramik
Ecolabel criteria - Part 8: ceramic tile product categories
SNI 7228.1:2011
Prasyarat ekolabel - Bagian 1: Cara uji senyawa bersifat bioakumulatif dengan penetapan koefisien partisi oktanol-air secara Kromatografi Cairan Kinerja Tinggi (High Performance Liquid Chromatography/HPLC)
Ecolabelling prerequisite - Part 1: Test method for determination of compounds are bioakumulatif with oktanol-water partition coefficients by High Performance Liquid Chromatography/HPLC
Kriteria ekolabel - Bagian 9: Kategori produk furnitur - Furnitur perkantoran
Ecolabel criteria - Part 9: Product category furniture - Office furniture
SNI 7188.9:2015
13.020.99
Standar lain yang berkaitan dengan perlindungan lingkungan
SNI 04-3890.2.7-2002
12
15
21
Other standards related to environtmental protection
Klasifikasi kondisi lingkungan - Bagian 2-7 : Kondisi lingkungan yang ada di alam - Flora dan fauna
Classification of environmental conditions - Part 2-7: Environmental conditions appearing in nature - Fauna and flora
6
IEC 60721-2-7: 1987, Classification of environmental condition - Part 2-7 : Environmental conditions appearing in nature - Fauna and flora Translation SNI 19-14020-2002
MOD Label dan deklarasi lingkungan - Prinsip umum
Environmental declaration and labels - General principles
10
Resource balance compiling - Part 3: Spacial land resources
39
ISO 14020-1998 Environmental labels and declarations - General principles Translation SNI 19-6728.3-2002
13.030
IDT Penyusunan neraca sumber daya - Bagian 3: Sumber daya lahan spasial
Wastes
Limbah
13.030.10
Limbah padat
Solid waste
SNI 19-3964-1995
Metode pengambilan dan pengukuran contoh timbulan dan komposisi sampah perkotaan
Test methods for sampling and measurement of pile and composition of urban garbage
SNI 19-3983-1995
Spesifikasi timbulan sampah untuk kota kecil dan kota sedang di Indonesia
Specification of garbage pile for small and medium city in Indonesia
7
SNI 19-6365-2000
Uji toksisitas limbah dari logam yang dapat terlindi
Toxicity tests of leached metal waste
7
SNI 19-6670-2002
Penentuan kadar logam berat dalam limbah padat dengan peleburan litium metaborat secara spektrofotometer serapan atom (SSA)
Determination of heavy metal content in solid waste by lithium metaborate fusion in an atomic absorption spectrophotometers (AAS)
SNI 19-6409-2000
Tata cara pengambilan contoh limbah tanpa pemadatan dari truk
Sampling methods of uncompacted wastes from trucks
SNI 19-6667-2002
Penentuan konsentrasi H2S dari sulfida reaktif dalam limbah padat
Determination of H2S concentration from reactive sulphide in solid waste
SNI 19-7030-2004
Spesifikasi kompos dari sampah organik domestik
Specification of domestic organic garbage compost
13.030.20
Limbah cair. Lumpur
19
14 9 12 9
Liquid wastes. Sludge
SNI 19-4183-1996
Tata pengukuran disesuaikan kadar sianida dalam limbah
Measurement codes for cyanide content in wastes
SNI 19-4181-1996
Pengolahan limbah cair dari proses sianida biji emas secara kimiawi
Treatment of effluent from cyanide gold ores process
SNI 13-6615-2001
Cara uji sianida wad dalam air limbah tambang dengan spektrometri
Test methods for cyanides in mine waste water by spectrophotometry
13
SNI 19-6447-2000
Metode pengujian kinerja instalasi pengolah lumpur aktif
Performance tests for activated sludge processing installation
10
SNI 19-4849-1998
Persyaratan penanggulangan tumpahan minyak di laut
Requirements for marine oil spills protection
8
SNI 19-4850-1998
Tata cara pelaporan tumpahan minyak di laut
Methods for reporting marine oil spills
7
SNI 7184.4:2010
Karakteristik limbah Bahan Berbahaya Beracun (B3) - Bagian 4: cara uji laju korosi dari limbah cair dan semi padat dengan metode Coupon
Characteristic Toxic Hazardous waste (B3) - Part 4: Test method for the corrosion rate of liquid and semi-solid waste by using Coupon
8
SNI 7184.3:2011
Karakteristik limbah Bahan Berbahaya Beracun (B3) - Bagian 3: Cara uji titik nyala dalam limbah cair dan semi padat
Characteristic of hazardous and poisonous material waste - Part 3: Test method of flash point in liquid and semi-solid waste
13.030.40
Instalasi dan peralatan untuk pembuangan dan pengo
4 2
Installations and equipment for waste disposal and
SNI 19-3241-1994
Pemilihan lokasi tempat pembuangan akhir sampah, Tata cara
Choices of location for end refuse disposal, Codes of practices
13
SNI 19-2454-2002
Tata cara teknik operasional pengelolaan sampah perkotaan
Manuals for technical operation of municifal waste management
31
SNI 19-7029-2004
Spesifikasi komposter rumah tangga individual dan komunal
Individual and communal household composting equipment specification
13
13.030.99
Standar lain yang berkaitan dengan limbah
SNI 7642:2010
13.040 13.040.01
Other standards related to wastes
Tata cara pemanfaatan oli bekas untuk campuran amonium nitrat dengan fuel oil pada tambang terbuka
Method for the utilization of used oil to mix ammonium nitrate with fuel oil in open pit
Air quality
Kualitas udara Kualitas udara secara umum
Aie quality in general
SNI 19-4174-1996
Penentuan kadar belerang dioksida (SO2) di udara dengan metode pararosanilina
Determination of sulphur dioxide (SO2) in air by pararosanilina methods
5
SNI 19-4173-1996
Penentuan kadar raksa di udara dengan mercury analyzer
Determination of mercury content in air using mercury analyzers
4
SNI 19-2879-1992
Cara uji hidrokarbon C1 sampai C5 di udara
Test methods for hydrocarbons C1 to C5 in air
SNI 19-2966-1992
Udara, Cara uji kadar timbal
Ambient air, Test methods for lead content
SNI 19-4844-1998
Metode pengujian konsentrasi hidrogen sulfida (H2S) dalam udara dengan alat spektrofotometer air sampler (HVS)
Test methods for hydrogen sulphide (H2S) concentration in air using spectrophotometer air samplers (HVS)
SNI 13-4703-1998
Penentuan kadar debu di udara dengan penangkap debu jatuh (dust fall collector)
Determination of dust content in air by dust fall collector
SNI 19-4841-1998
Metode pengujian kadar NOx di udara dengan menggunakan alat spektrofotometer
Test methods for Nox content in air using spectrophotometers
13
SNI 19-4843-1998
Metode pengujian kandungan gas hidrokarbon (HC) di udara dengan alat kromatografi gas
Test methods for hydrocarbon (HC) gas content in air using gas chromatography apparatus
10
SNI 19-4845-1998
Metode pengujian kandungan gas CO di udara dengan menggunakan NDR
Test methods for CO gas content in air using non dispersive infrared (NDR)
12
- 42 -
14 5 12 5
SNI 19-4842-1998
Metode pengujian kandungan gas O3 di udara dengan menggunakan alat spektrofotometer
Test methods for O3 gas content in air by using spectrophotometers
SNI 19-1658-1989
Udara, Cara uji kadar hidrokarbon total, metana dan monoksida
Ambient air, Test methods for total hydrocarbon, methane and monoxyde
SNI 19-1125-1989
Cara pengambilan contoh udara untuk analisa gas dan uap
Methods for sampling of air for gas and vapour analysis
SNI 19-1501-1989
Cara uji kadar total oksida-oksida nitrogen di udara
Test methods for total nitrogen oxide in air
5
SNI 19-1131-1989
Cara uji kadar monoksida di udara
Test methods for carbon monoxide content in ambient air
3
SNI 19-1499-1989
Udara, Cara uji kadar hidrogen sulfida (H2S)
Ambient air, Test methods for hydrogen sulphide (H2S) content
9
SNI 19-1424-1989
Cara uji kadar belerang dioksida udara
Test methods for sulphur dioxide content of ambient air
SNI 19-1500-1989
Udara, Cara uji kadar nitrogen
Ambient air, Test methods for nitrogen content
13.040.20
Atmosfir ambien
11 5 24
13 5
Ambient atmospheres
SNI 19-7119.5-2005
Udara ambien - Bagian 5: Cara uji kadar sulfat indeks dengan media PbO2 candle secara turbidimetri menggunakan spektrofotometer
Ambient atmospheres - Part 5: Test methods of index sulphate content by PBO2 candle media and turbidimetry using spectrophotometers
SNI 19-6603-2001
Pengukuran total partikel tersuspensi di udara ambien dengan metode gravimetri
Measurement of total suspended particle in ambient air by gravimetric methods
SNI 19-7119.3-2005
Udara ambien - Bagian 3: Cara uji partikel tersuspensi total menggunakan peralatan high volume air sampler (HVAS) dengan metode gravimetri
Ambient atmospheres - Part 3: Test methods of total suspended particle by gravimetry using high volume air sampler (HVAS) equipment
11
SNI 19-7119.4-2005
Udara ambien - Bagian 4: Cara uji kadar timbal (Pb) dengan metode destruksi basah menggunakan spektrofotometer serapan atom
Ambient atmospheres - Part 4: Test methods of lead (Pb) content by wet destruction using atomic absorption spectrophotometers
10
SNI 19-7119.7-2005
Udara ambien - Bagian 7: Cara uji kadar sulfur dioksida (SO2) dengan metode pararosanilin menggunakan spektrofotometer
Ambient atmospheres - Part 7: Test methods of sulphur dioxide (SO2) content by pararosaniline using spectrophotometers
17
SNI 19-7119.1-2005
Udara ambien - Bagian 1: Cara uji kadar amoniak (NH3) dengan metode indofenol menggunakan spektrofotometer
Ambient atmospheres - Part 1: Test methods of ammonia (NH3) content by indophenols using spectrophometers
13
SNI 19-7119.2-2005
Udara ambien - Bagian 2: Cara uji kadar nitrogen dioksida (NO2) dengan metode Griess Saltzman menggunakan spektrofotometer
Ambient atmospheres - Part 2: Test methods of nitrogen dioxide (NO2) content by Griess Saltzman using spectrophotometers
12
SNI 19-7119.6-2005
Udara ambien - Bagian 6: Penentuan lokasi pengambilan contoh uji pemantauan kualitas udara ambien
Ambient atmospheres - Part 6: The determination of test sample location for controlling of ambient atmosphere quality
11
SNI 19-7119.8-2005
Udara ambien - Bagian 8: Cara uji kadar oksidan dengan metode neutral buffer kalium iodida (NBKI) menggunakan spektrofotometer
Ambient atmospheres - Part 8: Test methods of oxidant content by neutral buffer potassium iodide using spectrophotometers
14
SNI 19-7119.9-2005
Udara ambien - Bagian 9: Penentuan lokasi pengambilan contoh uji pemantauan kualitas udara roadside
Ambient atmospheres - Part 9: The determination of test sample location for controlling of roadside atmosphere quality
12
SNI 7119.10:2011
Udara ambien - Bagian 10: Cara uji kadar karbon monoksida (CO) menggunakan metode Non Dispersive Infra Red (NDIR)
Ambient atmospheres - Part 10: Test methods of carbon monoxide (CO) by method of Nondispersive Infra Red (NDIR)
13.040.30
Atmosfir tempat kerja
11 7
Workplace atmospheres
SNI 19-4785-1998
Cara uji kandungan formaldehida di udara tempat kerja
Test methods for formaldehyde content of air in work places
SNI 16-7059-2004
Pengukuran statis kadar serat asbes di udara tempat kerja
The static measurement of asbestos fibre content in work place atmosphere
SNI 7325:2009
Metoda pengukuran kadar debu respirabel di udara tempat kerja secara perseorangan
Measurement methods of respirable dust content degree in air working place by person
SNI 16-7058-2004
Pengukuran kadar debu total di udara tempat kerja
The measurement of total ash content in work place atmosphere
12
SNI 19-0232-2005
Nilai ambang batas (NAB) zat kimia di udara tempat kerja
Threshold levels for chemical substances in the workplace atmosphere
30
SNI 7326:2009
Metoda uji kualitatif layak pakai respirator partikel
Qualitative testing methods for proper particle respirator
SNI 7324:2009
Tata cara pengambilan sampel pencemar udara tempat kerja secara perorangan
Code of pollutant sampling method in air working place by person
SNI 7249:2009
Pengukuran dengan metoda statis kadar toluen di udara tempat kerja
Static methods measurement of toluen content degree in the air working place
SNI 7248:2009
Pengukuran dengan metoda statis kadar timah hitam (Pb) di udara tempat kerja
Static methods measurement of lead (Pb) content degree in the air working place
SNI 7230:2009
Teknik penentuan titik pengambilan sampel udara di tempat kerja
Determination technique of air working place sampling point
SNI 7187:2009
Metoda pengukuran kadar metil etil keton udara tempat kerja dengan pengambilan sampel secara perorangan
Measurement methods of methyl ethyl keton degree in the air work place by using sampling by person
SNI 19-1129-1989
Cara uji kadar gas di lingkungan pekerjaan las
Test methods for gas concentration in welding environment
4
SNI 19-1428-1989
Lingkungan kerja, Cara uji kadar timbal
Working area, Test methods for lead content
3
SNI 19-1426-1989
Lingkungan kerja, Cara uji kadar fosgen
Working area, Test methods for phosgene content
SNI 19-1502-1989
Cara uji kontinyu kadar oksida-oksida nitrogen udara di lingkungan kerja
Test methods for nitrogen oxide content of air in working area
SNI 19-1126-1989
Cara uji kadar belerang dioksida di lingkungan kerja
Test methods for sulphur dioxide content in a working area
5
SNI 19-1427-1989
Lingkungan kerja, Cara uji kadar krom
Chromium content of working area, Test methods
5
13.040.40
Emisi sumber tak bergerak
7 15
3 20
Stationary source emissions
SNI 7117.16:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 16 :Penentuan kadar uap air secara gravimetri
Exhaust gas emissions - Stationary sources - Part 16: The determination of moisture content by gravimetry
SNI 7117.17:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 17 :Penentuan kadar partikulat secara isokinetis
Exhaust gas emissions - Stationary sources - Part 17: The determination of particulate content by isokinetic
SNI 7117.18:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 18 :Cara uji sulfur dioksida (SO2) secara turbidimetri menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 18: Test methods of sulfur dioxide (O2) by turbidimetry using a spectrophotometer
SNI 19-7117.6-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 6: Cara uji kadar amoniak (NH3) dengan metode indofenol menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 6: Test methods of ammonia (NH3) content by indophenol methods using spectrophotometers
SNI 7117.19:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 19 :Cara uji Total Reduced Sulfur (TRS) secara turbidimetri dengan alat spektrofotometer
Exhaust gas emissions - Stationary sources - Part 19: Test methods of Total Reduced Sulphur (TRS) by turbidimetry using a spectrophotometer
SNI 7119.13:2009
Udara Ambien - Bagian 13 :Cara uji hidrokarbon (HC) menggunakan hydrocarbon analyzer dengan detektor ionisasi nyala (Flame Ionization Detector/FID)
Ambient atmospheres - Part 13: Test methods of hydrocarbons (HC) using a hydrocarbon analyzer with a flame ionization detector (Flame Ionization Detector / FID)
SNI 19-7117.7-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 7: Cara uji kadar hidrogen sulfida (H2S) dengan metode biru metilen menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 7: Test methods of hydrogen sulphide (H2S) content by methylene blue using spectrophotometers
SNI 7117.15:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 15 :Penentuan berat molekul kering
Exhaust gas emissions - Stationary sources - Part 15: The determination of dry molecular weight
- 43 -
14
15
SNI 19-7117.9-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 9: Cara uji kadar hidrogen fluorida (HF) dengan metode kompleks lanthanum alizarin menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 9: Test methods of hydrogen fluoride (HF) content by complex lanthanum alizarine using spectrophotometers
14
SNI 19-7117.4-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 4: Cara uji kadar uap air dengan metode gravimetri
Exhaust gas emissions - Stationary sources - Part 4: Test methods of fume content by gravimetry
10
SNI 19-7117.10-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 10: Cara uji konsentrasi CO, CO2, dan O2 dengan peralatan analisis otomatik
Exhaust gas emissions - Stationary sources - Part 10: Test methods of CO, CO2 and O2 concentration using automatic analysis instrumentation
SNI 19-7117.11-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 11: Cara uji opasitas menggunakan skala Ringelmann untuk asap hitam
Exhaust gas emissions - Stationary sources - Part 11: Opacity test methods for black smoke using Ringelmann scales
12
SNI 19-7117.8-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 8: Cara uji kadar hidrogen klorida (HCl) dengan metode merkuri tiosianat menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 8: Test methods of hydrogen chloride (HCl) content by mercury thiocyanate using spectrophotometers
14
SNI 7117.14:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 14 :Penentuan kecepatan linear
Exhaust gas emissions - Stationary sources - Part 14: The determination of linear speed
SNI 7117.20:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 20 : Penentuan kadar logam
Exhaust gas emission - Stationary resources - Part 20 : Metals content determination
SNI 19-7117.5-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 5: Cara uji oksida-oksida nitrogen dengan metode phenol disuphonic acid (PDS) menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 5: Test methods of nitrogen oxides by phenol dissulphonic acid (PDS) using spectrophotometers
15
SNI 19-7117.3.2-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 3: Oksida-oksida sulfur (SOx) - Seksi 2: Cara uji dengan metode netralisasi titrimetri
Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 2: Test methods by neutralization titrimetry
13
SNI 19-7117.3.1-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 3: Oksida-oksida sulfur (SOx) - Seksi 1: Cara uji dengan metode turbidimetri menggunakan spektrofotometer
Exhaust gas emissions - Stationary sources - Part 3: Sulphur oxides (SOx) - Section 1: Turbidimetry test methods using spectrophotometers
14
SNI 19-7117.2-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 2: Penentuan lokasi dan titik-titik lintas pengambilan contoh uji partikel
Exhaust gas emissions - Stationary sources - Part 2: Determination of location and crosspoints of particle test sampling
11
SNI 19-7117.1-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 1: Penentuan kecepatan alir
Exhaust gas emissions - Stationary sources - Part 1: Determination of flow speed rates
12
SNI 19-7117.12-2005
Emisi gas buang - Sumber tidak bergerak - Bagian 12: Penentuan total partikel secara isokinetik
Exhaust gas emissions - Stationary sources - Part 12: The determination of particle total by isokinetic
13
SNI 7117.13:2009
Emisi gas buang - Sumber tidak bergerak - Bagian 13 : penentuan lokasi dan titik-titik lintas untuk pengambilan contoh uji partikulat dan kecepatan
Exhaust gas emissions - Stationary sources - Part 13: The determination of the location and cross-points for sampling of particulate test and linear velocity
SNI 19-1128-1989
Cara uji kadar debu pada cerobong
Test methods for dust content of chimney
13
SNI 19-1422-1989
Cara pengambilan contoh gas dari cerobong
Methods for sampling of gases from chimneys
24
13.040.50
Emisi buangan transportasi
9
Transport exhaust emissions
SNI 19-2877-1992
Gas buang, Cara uji kadar hidrogen sianida
Exhaust-gases, Test methods for hydrogen cyanide content
7
SNI 19-2965-1992
Gas buang, Cara uji kadar raksa
Exhaust-gases, Test methods for mercury content
4
SNI 09-7118.2-2005
Emisi gas buang - Sumber bergerak - Bagian 2: Cara uji kendaraan bermotor kategori M, N dan O berpenggerak penyalaan kompresi pada kondisi akselerasi bebas
Exhaust gas emissions - Movable source - Part 2: Test methods of motor vehicles category M, N and O having a motivator compression ignition at free acceleration condition
11
SNI 09-7118.1-2005
Emisi gas buang - Sumber bergerak - Bagian 1: Cara uji kendaraan bermotor kategori M, N dan O berpenggerak penyalaan cetus api pada kondisi idle
Exhaust gas emissions - Movable source - Part 1: Test methods of motor vehicles category M, N and O having a motivator lighter ignition at idle condition
11
SNI 09-7118.3-2005
Emisi gas buang - Sumber bergerak - Bagian 3: Cara uji kendaraan bermotor kategori L pada kondisi idle
Exhaust gas emissions - Movable source - Part 3: Test methods of motor vehicles category L at idle condition
12
SNI 19-1666-1989
Gas buang, Cara uji kadar vanadium
Exhaust-gases, Test methods for vanadium content
6
SNI 19-1432-1989
Gas buang, Cara uji kadar nitrogen dioksida
Exhaust-gases, Test methods for nitrogen dioxide content
5
SNI 19-1431-1989
Gas buang, Cara uji kadar klor
Exhaust gases, Test methods for chloride content
5
SNI 19-1430-1989
Gas buang, Cara uji kadar hidrogen sulfida
Exhaust-gases, Test methods for hydrogen sulphide content
4
SNI 19-1429-1989
Gas buang, Cara uji kadar hidrogen klorida
Exhaust-gases, Test methods for hydrogen chloride content
6
SNI 19-1433-1989
Gas buang, Cara uji kadar senyawa flour
Exhaust-gases, Test methods for fluoric compound content
10
13.060
Water quality
Kualitas air
SNI DT 91-0005-2007
Spesifikasi unit paket instalasi pengolahan air
Specification of water processing installation packet units
21
SNI DT 91-0003-2007
Tata cara pengoperasian dan pemeliharaan unit paket instalasi pengolahan air
Codes for operation and maintenance of water processing installation packet units
38
13.060.01
Kualitas air secara umum
Water quality in general
SNI 06-2505-1991
Air, Metode pengujian kadar karbon organik total dengan alat KOT meter infra merah
Water, Test methods for total organic carbon content by infrared KOT analyzers
15
SNI 06-2509-1991
Air, Metode pengujian kadar pestisida karbonat dengan alat kromotografi gas
Water, Test methods for carbonate pesticide content by gas chromatography apparatus
13
SNI 06-2510-1991
Air, Metode pengujian kadar fosfat-organik dengan alat kromatografi gas
Water, Test methods for organic phosphate content by gas chromatography apparatus
13
SNI 06-2508-1991
Air, Metode pengujian kadar pestisida klor-organik dengan alat kromatografi gas
Water, Test methods for organic chlor pesticide content by gas chromotography apparatus
13
SNI 06-4157-1996
Metode pengujian kadar klorofil A fitoplankton dalam air dengan spektrofotometer
Test methods for chlorophyl A phytoplankton content in water by spectrophotometers
14
SNI 06-2425-1991
Air, Metode pengujian oksigen terlarut dengan elektrokimia
Water, Test methods for soluble oxygen by electrochemistry
18
SNI 03-4152-1996
Metode pengujian kadar kalium dalam sedimen melayang dengan asam klorida menggunakan alat spektrofotometer serapan atom
Test methods for potassium in light sediment by hydrogen chloride using atomic absorption spectrophotometer apparatus
13
SNI 06-4138-1996
Metode pengujian besi terlarut dalam air dengan alat spektrofotometer menggunakan fenantrolin
Test methods for soluble ferrous in water by spectrophotometer apparatus using fenantroline
15
SNI 06-4139-1996
Metode pengujian kadar karbon dioksida agresif dalam air secara titrimetrik
Test methods for aggressive carbon dioxide content in water by titrimetric
13
SNI 06-4140-1996
Metode pengujian produktivitas primer dalam air dengan pengukuran oksigen terlarut
Test methods for primary productivity in water by soluble oxigen measurement
2l
SNI 03-4146-1996
Metode pengujian kadar nitrogen total sedimen layang dengan alat destilasi Kjeldahl secara titrasi
Test methods for total nitrogen of suspended sediment by Kjeldahl distillation apparatus
6
SNI 06-4159-1996
Metode pengujian kadar karbon kloroform ekstrak dalam air secara gravimetri
Test methods for carbon chloroform extract content in water by gravimetric methods
- 44 -
13
SNI 03-4151-1996
Metode pengujian kadar fosfat dalam sedimen melayang dengan asam klorida menggunakan alat spektrofotometer secara amonium molibdat
Test methods for phosphate content in light sediment by hydrogen chloride using spectrophotometer apparatus in ammonium molybdat manuver
15
SNI 06-2513-1991
Air, Metode pengujian kadar krom dengan alat spektrofotometer serapan atom tungku karbon
Water, Test methods for chromium content by carbon stove atomic absorption spectrophotometer apparatus
15
SNI 06-4158-1996
Metode pengujian jumlah total bakteri golongan koli dalam air dengan tabung fermentasi
Test methods for total bacteria coli in water using fermentation tubes
20
SNI 19-2601-1992
Air dan air buangan, Cara uji kadar arsen
Water and waste water, Test methods for arsenic content
SNI 03-3401-1994
Metode pengujian jenis dan jumlah hewan bentos
Test methods for types and quantities of benthos
14
SNI 06-3415-1994
Metode pengujian kadar sulfit dalam air dengan titrimeterik
Water, Test methods for sulphite content by titrimetric methods
14
SNI 06-2516-1991
Air, Metode pengujian kadar tembaga dengan alat spektrofotometer serapan atom tungku karbon
Water, Test methods for copper content by carbon stove atomic absorption spectrophotometer apparatus
14
SNI 06-2515-1991
Air, Metode pengujian kadar tembaga dengan alat spektrofotometer serapan atom secara ekstraksi
Water, Test methods for copper content by atomic absorption spectrophotometers in an extraction manuver
16
SNI 06-2423-1991
Metode pengujian keasaman dalam air dengan potensiometrik
Water, Test methods for acidity by potentiometric
21
SNI 06-2479-1991
Air, Metode pengujian kadar amonium dengan alat spektrofotometer secara Nessler
Water, Test methods for ammonium content by spectrophotometer apparatus in a Nessler manuver
16
SNI 06-3605-1994
Cara uji air raksa dalam contoh air dengan alat penganalisis air raksa (mercury analyzer)
Water analysis, Test methods of mercury by mercury analyzers
SNI 19-3956-1995
Metode pengujian jumlah bakteri koli tinja dalam air dengan saringan membran
Test methods for total faeces bacteria coli in water by membrane filters
15
SNI 06-2475-1991
Air, Metode pengujian kadar selenium dengan alat spektrofotometer serapan atom tungku karbon
Water, Test methods for selenium content by carbon stove atomic absorption spectrophotometer apparatus
14
SNI 06-2412-1991
Metode pengambilan contoh kualitas air
Sampling methods of water quality
41
SNI 06-2428-1991
Air, Metode pengujian atom dengan spektrofotometer serapan atom
Water, Test methods for atom by atomic absorption spectrophotometer apparatus
18
SNI 06-2470-1991
Air, Metode pengujian kadar sulfida dengan alat ion selektif meter
Water, Test methods for sulphide content by selective meter ion apparatus
16
SNI 06-2421-1991
Metode pengujian kelindian dalam air dengan potensiometrik
Test methods for alkalinity in water by potentiometric
22
SNI 06-2477-1991
Air, Metode pengujian kadar silika dengan alat spektrofotometer secara molibdat silikat
Water, Test methods for silicon dioxide content by spectrophotometer apparatus in a silicate molybdate manuver
16
SNI 06-2422-1991
Air, Metode pengujian keasaman dengan titrimetrik
Water, Test methods for acidity by titrimetry
20
SNI 06-2480-1991
Air, Metode pengujian kadar nitrat dengan alat spektrofotometer secara brusin sulfat
Water, Test methods for nitrate content by spectrophotometers in a sulphate brusin manuver
12
SNI 06-2481-1991
Air, Metode pengujian kadar boron dengan alat spektrofotometer secara kurkumin
Water, Test methods for boron content by spectrophotometers in a curcumium manuver
15
SNI 06-2482-1991
Air, Metode pengujian kadar fluorida dengan alat spektrofotometer secara alizarin merah
Water, Test methods for fluoride content by spectrophotometers in a red alizaryn manuver
12
SNI 19-3957-1995
Metode pengujian jumlah bakteri koli tinja dalam air dengan tabung fermentasi
Test methods for total faeces bacteria coli in water by fermentation tube
18
SNI 06-3963-1995
Metode pengujian jenis dan jumlah plankton dalam air
Test methods for species and total of plankton in water
32
SNI 06-3971-1995
Metode pengujian kadar sulfit dalam air dengan alat spektrofotometer
Test methods for sulphite content by spectrophotometer apparatus
16
SNI 06-2420-1991
Metode pengujian kelindian dalam air dengan titrimetrik
Test methods for alkalinity in water by titrimetry
21
SNI 06-2913-1992
Metode pengujian kadar arsen dalam air dengan alat spektrofotometer serapan atom secara natrium borohidrida
Test methods for arsenic content in water using atomic absorption spectrophotometer apparatus in borohydride sodium manuver
20
SNI 06-2473-1991
Air, Metode pengujian kadar kobal dengan alat spektrofotometer serapan atom secara ekstraksi
Water, Test methods for cobalt content by atomic absorption spectrophotometer in an extraction manuver
16
SNI 13-4718-1998
Tata pengambilan percontoh bentos pada badan perairan umum
Sampling methods of benthos in rivers
5
SNI 13-4717-1998
Tata pengambilan percontoh plankton pada badan perairan umum
Sampling methods of plankton in rivers
5
SNI 06-4421-1997
Metode pengujian oksigen kimiawi cara refleks terbuka
Test methods of chemical oxygen by open reflux
10
SNI 06-4822-1998
Metode pengujian kadar mangan dalam air dengan alat spektrofotometer secara persulfat
Test methods for manganese content in water by spectrophotometer in persulphate
12
SNI 06-4824-1998
Metode pengujian kadar klorin bebas dalam air dengan alat spektrofotometer sinar tampak secara dietil fenilindiamin
Test methods for free chlorine content in water by visible light spectrophotometers in diethyl phenylendiamine (DPD)
11
SNI 06-6438-2000
Metode pengujian bakteri besi dalam air dan dalam endapan yang dibentuk oleh air
Test methods for ferro bacteria in water and in water performed sediment
13
SNI 03-6375-2000
Tata cara pengambilan contoh air dari saluran tertutup
Sampling methods of water from closed conduits
22
SNI 06-4569-1998
Cara uji poli kloro bifenil (PCB) dalam air dan air buangan
Test methods for poly chloro byphenil in water and waste water
5
SNI 19-6449-2000
Metode pengujian koagulasi-flokulasi dengan cara jar
Test methods for coagulation-flocculation by jar methods
6
SNI 6989.64:2009
Air dan air limbah - Bagian 64: Cara uji timah (Sn) secara Spektrofotometri Serapan Atom (SSA) - tungku karbon
Water and waste water - Part 64 : Test methods for tin content in water by atomic absorption spectrophotometers - carbon stove
SNI 6989.57:2008
Air dan air limbah - Bagian 57 : Metoda pengambilan contoh air permukaan
Water and waste water - Part 57 : Sampling method for surface water
SNI 6989.72:2009
Air dan air limbah - Bagian 72: Cara uji Kebutuhan Oksigen Biokimia (Biochemical Oxygen Demand/BOD)
Water and waste water - Part 72 : Test method for Biochemical Oxygen Demand/BOD
SNI 6989.69:2009
Air dan air limbah - Bagian 69: Cara uji kalium (K) secara Spektrofotometri Serapan Atom (SSA) - nyala
Water and waste water - Part 69 : Test method for kalium by atomic absorption spectrophotometer - burning
SNI 6989.58:2008
Air dan air limbah - Bagian 58 : Metoda pengambilan contoh air tanah
Water and wastewater - Part 58 : Sampling method for ground water
SNI 6989.63:2009
Air dan air limbah - Bagian 63: Cara uji perak (Ag) secara Spektrofotometri Serapan Atom (SSA) - tungku karbon
Water and waste water - Part 63 : Test methods for silver content in water by atomic absorption spectrophotometer - carbon stoves
SNI 7531:2009
Alat pengolah air dengan membran ultra
Water processing units with ultra membrane
SNI 7629:2008
Tata cara commissioning instalasi pengolahan air
Code of conducts for commisioning of water processing installation
SNI 6989.68:2009
Air dan air limbah - Bagian 68: Cara uji kobal (Co) secara Spektrofotometri Serapan Atom (SSA) - nyala
Water and waste water - Part 68 : Test method for cobalt content by atomic absorption spectrofotometer - burning
SNI DT 91-0002-2007
Tata cara perencanaan unit paket instalasi pengolahan air
Codes for designing of water processing installation packet units
Translation
- 45 -
5
2
23
19
SNI 4146:2013
Pengujian kadar nitrogen total sedimen dengan alat distilasi Kjeldahl secara titrasi
Testing of the total nitrogen content of the sediment by the Kjeldahl distillation apparatus in titration
6
SNI 06-1130-1989
Cara uji kadar kadmium dalam air
Test methods for cadmium content in water
8
SNI 19-1660-1989
Air dan air buangan, Cara uji kadar minyak dan lemak
Water and waste water, Test methods for oil and fat content
3
SNI 06-1138-1989
Air, Cara uji kadar timbal
Water, Test methods for lead content
9
SNI 19-1659-1989
Air dan air buangan, Cara uji kadar klorida
Water and waste water, Test methods for chloride content
4
SNI 03-6817-2002
Metode pengujian mutu air untuk digunakan dalam beton
Test methods of water quality for being used in concretes
5
SNI 06-1135-1989
Air, Cara uji kadar residu suspensi
Water, Test methods for suspension residue content
4
SNI 19-1656-1989
Air dan air buangan, Cara uji kadar fenol
Water and waste water, Test methods for phenol content
6
SNI 19-1663-1989
Air dan air buangan, Cara uji kadar sulfat
Water and waste water, Test methods for sulphate content
3
SNI 06-1127-1989
Cara uji kadar besi dalam air
Test methods for iron content in water
6
SNI 06-1132-1989
Cara uji kadar krom dalam air
Test methods for chromium content in water
5
SNI 19-1419-1989
Air dan air buangan, Cara uji kadar nickel
Water and waste water, Test methods for nickel content
3
SNI 19-1421-1989
Air dan air buangan, Cara uji kadar tembaga
Water and waste water, Test methods for copper content
3
SNI 06-1137-1989
Air, Cara uji kadar seng
Water, Test methods for zinc content
9
SNI 06-1140-1989
Cara uji pH air dengan elektrometer
Water, pH test methods for electrometers
SNI 06-6858-2002
Metode pengujian kadar bakteri koli total dalam air dengan saringan membran
Test methods of total coli bacteria in water by membrane filters
13
SNI 06-1133-1989
Air, Cara uji kadar mangan
Water, Test methods for manganese content
10
SNI 19-1662-1989
Air dan air buangan, Cara uji kadar nitrit
Water and waste water, Test methods for nitrite content
13.060.10
Air dari sumber alam
4
5
Water of natural resources
SNI 03-2528-1991
Air tanah, Metode eksplorasi awal dengan cara geolistrik Wenner
Ground water, Methods of preexploration by geoelectric Wenner methods
34
SNI 03-2817-1992
Metode pengujian akifer tertekan dengan geolistrik pemompaan Papadapulos-Cooper
Test methods for pressed aquifers by Papadapulos-Cooper pumping geoelectric
23
SNI 03-2527-1991
Akifer tertekan, Metode pengujian karakteristik dengan uji pemompaan Jacob 1
Confened aquifers, Characteristic test methods by Jacob 1 pump tests
19
SNI 19-4794-1998
Cara uji penta kloro fenol (PCP) dalam air dan air buangan
Test methods for pentachlorophenol in water and waste water
SNI 13-7121-2005
Penyelidikan potensi air tanah skala 1:100.000 atau lebih besar
Surveys of ground water potential scale 1:100.000 or more
SNI 06-6596-2001
Perlakuan contoh air untuk analisis logam dengan spektrofotometer serapan atom (SSA)
Water treatment for metal analysis by atomic absorption spectrophotometers
SNI 3414:2008
Tata cara pengambilan contoh muatan sedimen melayang di sungai dengan cara integrasi kedalaman berdasarkan pembagian debit
Sampling method for river sediment contaned by way of depth integrated base on discharge distribution
20
SNI 03-7016-2004
Tata cara pengambilan contoh dalam rangka pemantauan kualitas air pada suatu daerah pengaliran sungai
Sampling methods for water quality control in river flow area
18
SNI 2817:2015
Tata cara analisis dan evaluasi data uji pemompaan dengan metode Papadopulos Cooper
The procedure for the analysis and evaluation of the pumping test data with methods Papadopulos Cooper
20
SNI 06-1416-1989
Cara pengambilan contoh air
Sampling methods for water
14
SNI 19-6728.1-2002
Penyusunan neraca sumber daya - Bagian 1: Sumber daya air spasial
Resource balance compiling - Part 1: Spacial water resources
29
13.060.20
Air minum
5 17 7
Drinking water
SNI 06-4592-1998
Petunjuk pengambilan contoh air minum dan air untuk pegolahan makanan minuman
Guidance on sampling of drinking water and water for food processing
SNI 7228.3:2011
Prasyarat ekolabel - Bagian 3: Cara uji biodegradasi surfaktan anionik
Ecolabelling prerequisite - Part 3: Test Method of anionic surfactant biodegradation
SNI 15-1025-1989
Kapur untuk pengolahan air
Lime for water treatment
4
SNI 01-0220-1987
Air minum
Drinking water
5
13.060.25
Air untuk penggunaan industri
2
Water for industrial use
SNI 06-4372-1996
Cara uji kadar hidrazin dalam air boiler
Test methods for hydrazin content in boiler water
SNI 4872:2015
Es untuk penanganan dan pengolahan ikan
Ice for the handling and processing of fish
10
SNI 19-1719-1989
Air pengisi ketel uap
Water for steam boiler
17
SNI 06-0649-1989
Air untuk proses penyamakan kulit samak nabati
Water for tanning process of vegetable tanned leather
13.060.30
Air buangan
2
2
Sewage water
SNI 19-2875-1992
Air limbah, Cara uji kebutuhan oksigen biokimia
Waste water, Test methods for biochemical oxygen demand
6
SNI 06-4571-1998
Cara uji kebutuhan oksigen kimia (COD) air limbah secara permanganometri
Test methods for chemical oxygen demand (COD) of waste water in permaganometric manner
4
SNI 06-2136-1991
Bioaletrin
Bioallethrine
5
SNI 06-4563-1998
Cara uji kadar residu suspensi dalam air limbah penyamakan kulit
Test methods for suspension content in leather tanning waste water
5
SNI 19-4795-1998
Cara uji kadar sulfida dalam air limbah penyamakan kulit
Tets method for sulphide content in leather tanning waste water
4
SNI 19-6466-2000
Tata cara evaluasi lapangan untuk sistem peresapan pembuangan air limbah rumah tangga
Methods for field evaluation of private sewage disposal absorption systems
14
SNI 19-4780-1998
Cara uji kadar nitrogen amoniak dalam air limbah penyamakan kulit
Test methods for nitrogen amonium content ini leather tanning waste water
10
SNI 19-6036-1999
Cara uji hidrogen peroksida (H2O2) dalam air limbah
Test methods for hydrogen peroxide (H2O2) in waste water
13.060.45
Pengujian air secara umum
SNI 7828:2012
8
Examination of water in general
Kualitas air - Pengambilan contoh - Bagian 5: Pengambilan contoh air minum dari instalasi pengolahan air dan sistem jaringan distribusi perpipaan
Water quality - Sampling - Part 5: Sampling of drinking water from the water treatment plant and distribution system piping network
ISO 5667-5:2006 MOD SNI 6964.8:2015
MOD Kualitas air laut - Bagian 8: Metode pengambilan contoh uji air laut
The quality of sea water - Part 8: Methods of test sampling seawater
- 46 -
32
13.060.50
Pengujian kandungan kimia dalam air
Examination of water for chemical subtances
SNI 06-2483-1991
Air, Metode pengujian kadar ortofosfat dan fosfat total dengan alat spektrofotometer secara asam askorbat
Water, Test methods for total phosphate and orthophosphate content by spectrophotometers in a ascorbic acid
SNI 06-2472-1991
Metode pengujian kadar kobal dalam air dengan alat spektrofotometer serapan atom tungku karbon
Test methods for cobalt content in water by carbon stoves atomic absorption spectrophotometer apparatus
SNI 06-6989.12-2004
Air dan air limbah - Bagian 12: Cara uji kesadahan total kalsium (Ca) dan magnesium (Mg) dengan metode titrimetri
Water and waste water - Part 12: Test methods of hardness of calcium (Ca) and magnesium (Mg) total by titrimetry methods
15
SNI 06-2484-2002
Metode pengujian kadar nitrit dalam air dengan kolorimetri
Test methods for nitrite content in water by colorymetry
11
SNI 06-6601-2001
Tata penentuan sulfat dalam air secara gravimetri dengan pengeringan residu
Methods for determination of sulphate in water by residue draining in gravimetric methods
SNI 06-2413-2002
Metode pengujian kadar padatan dalam air
Test methods for solid matter content in water
14
SNI 06-6989.15-2004
Air dan air limbah - Bagian 15: Cara uji kebutuhan oksigen kimiawi (KOK) dengan refluks terbuka secara titrimetri
Water and waste water - Part 15: Test methods of chemical oxygen demand (COD) opened reflux by titrimetry
10
SNI 19-2483-1991
Metode pengujian kadar ortofosfat dan fosfat dalam air dengan alat spektrofotometer secara asam askorbat
Test methods for phospate and ortophospate content on water by spectrophotometers in a ascorbic acid
SNI 03-6439-2000
Metode pengujian ion klorida dalam air
Test methods for chloride ion in water
11
SNI 06-6989.14-2004
Air dan air limbah - Bagian 14: Cara uji oksigen terlarut secara iodometri (modifikasi azida)
Water and waste water - Part 14: Test methods of dissolved oxygen by iodometry (azide modification)
10
SNI 06-6989.13-2004
Air dan air limbah - Bagian 13: Cara uji kalsium (Ca) dengan metode titrimetri
Water and waste water - Part 13: Test methods of calcium (Ca) by titrimetry
12
SNI 06-6989.11-2004
Air dan air limbah - Bagian 11: Cara uji derajat keasaman (pH) dengan menggunakan alat pH meter
Water and waste water - Part 11: Test methods of acidity levels (pH) by pH meters
7
SNI 06-2430-2002
Cara uji kadar magnesium dalam air
Test methods for magnesium content in water
7
SNI 06-6989.27-2005
Air dan air limbah - Bagian 27: Cara uji kadar padatan terlarut total secara gravimetri
Water and waste water - Part 27: Test methods of total dissolved solid content by gravimetric analysis
9
SNI 06-6989.47-2005
Air dan air limbah - Bagian 47: Cara uji kadar nikel (Ni) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 47: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.48-2005
Air dan air limbah - Bagian 48: Cara uji kadar nikel (Ni) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 48: Test methods of nickel (Ni) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.49-2005
Air dan air limbah - Bagian 49: Cara uji kadar besi (Fe) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 49: Test methods of iron (Fe) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.50-2005
Air dan air limbah - Bagian 50: Cara uji kadar besi (Fe) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 50: Test methods of iron (Fe) content by atomic absorption spectrophotometers (AAS) with carbon stoves
SNI 06-6989.51-2005
Air dan air limbah - Bagian 51: Cara uji kadar surfaktan anionik dengan spektrofotometer secara biru metilen
Water and waste water - Part 51: Test methods of anionic surfactant content with spectrophotometers by methylene blue
10
SNI 06-6989.45-2005
Air dan air limbah - Bagian 45: Cara uji kadar timbal (Pb) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 45: Test methods of lead (Pb) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.52-2005
Air dan air limbah - Bagian 52: Cara uji kadar nitrogen organik secara makro Kjeldahl dan titrasi
Water and waste water - Part 52: Test methods of nitrogen organic content by macro Kjeldahl and titration
11
SNI 06-6989.42-2005
Air dan air limbah - Bagian 42: Cara uji kadar mangan (Mn) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 42: Test methods of manganese (Mn) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.26-2005
Air dan air limbah - Bagian 26: Cara uji kadar padatan total secara gravimetri
Water and waste water - Part 26: Test methods of total solid content by gravimetric analysis
SNI 06-6989.54-2005
Air dan air limbah - Bagian 54: Cara uji kadar arsen (As) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 54: Test methods of arsenic (As) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.55-2005
Air dan air limbah - Bagian 55: Cara uji kadar magnesium (Mg) dengan spektrofotometer serapan atom (SSA)
Water and waste water - Part 55: Test methods of magnesium (Mg) content by atomic absorption spectrophotometers (AAS)
10
SNI 06-6989.33-2005
Air dan air limbah - Bagian 33: Cara uji kadar perak (Ag) dengan spektrofotometer serapan atom (SSA)
Water and waste water - Part 33: Test methods of silver (Ag) content by atomic absorption spectrophotometers (AAS)
10
SNI 06-6989.28-2005
Air dan air limbah - Bagian 28: Cara uji karbon organik total (TOC)
Water and waste water - Part 28: Test methods of total organic carbon (TOC)
10
SNI 06-6989.56-2005
Air dan air limbah - Bagian 56: Cara uji kadar kalsium (Ca) dengan spektrofotometer serapan atom (SSA)
Water and waste water - Part 56: Test methods of calcium (Ca) content by atomic absorption spectrophotometers
11
SNI 06-6989.43-2005
Air dan air limbah - Bagian 43: Cara uji kadar seng (Zn) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 43: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.41-2005
Air dan air limbah - Bagian 41: Cara uji kadar mangan (Mn) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 41: Test methods of manganese (Mn) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.40-2005
Air dan air limbah - Bagian 40: Cara uji kadar barium (Ba) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 40: Test methods of barium (Ba) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.39-2005
Air dan air limbah - Bagian 39: Cara uji kadar barium (Ba) dengan spektrofotometer serapan atom (SSA)
Water and waste water - Part 39: Test methods of barium (Ba) content by atomic absorption spectrophotometers (AAS)
10
SNI 06-6989.38-2005
Air dan air limbah - Bagian 38: Cara uji kadar kadmium (Cd) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 38: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.37-2005
Ari dan air limbah - Bagian 37: Cara uji kadar kadmium (Cd) dengan spektrofotometer serapan atom (SSA) secara ekstraksi
Water and waste water - Part 37: Test methods of cadmium (Cd) content with atomic absorption spectrophotometers (AAS) by extraction
10
SNI 06-6989.29-2005
Air dan air limbah - Bagian 29: Cara uji fluorida (F-) secara spektrofotometri dengan SPADNS
Water and waste water - Part 29: Test methods of fluorides (F-) by spectrophotometry with SPADNS
10
SNI 06-6989.30-2005
Air dan air limbah - Bagian 30: Cara uji kadar amonia dengan spektrofotometer secara fenat
Water and waste water - Part 30: Test methods of ammonia content with spectrophotometers by phenates
10
SNI 06-6989.31-2005
Air dan air limbah - Bagian 31: Cara uji kadar fosfat dengan spektrofotometer secara asam askorbat
Water and waste water - Part 31: Test methods of phosphate content by spectrophotometers with acid ascorbic
10
SNI 06-6989.36-2005
Air dan air limbah - Bagian 36: Cara uji kadar aluminium (Al) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 36: Test methods of aluminium (Al) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 06-6989.32-2005
Air dan air limbah - Bagian 32: Cara uji kadar sulfit (SO3=) secara titrimetri
Water and waste water - Part 32: Test methods of sulphite (SO3=) content by titrimetry
9
SNI 06-6989.35-2005
Air dan air limbah - Bagian 35: Cara uji kadar aluminium (Al) terlarut dengan spektrofotometer secara eriokrom sianin R
Water and waste water - Part 35: Test methods of dissolved aluminium (Al) content by spectrophotometers with eriochrome cyanine R
11
SNI 06-6989.44-2005
Air dan air limbah - Bagian 44: Cara uji kadar seng (Zn) dengan spektrofotometer serapan atom (SSA) secara tungku karbon
Water and waste water - Part 44: Test methods of zinc (Zn) content with atomic absorption spectrophotometers (AAS) by carbon stoves
10
SNI 6989.4:2009
Air dan air limbah - Bagian 4: Cara uji besi (Fe) Secara spektrofotometri Serapan Atom (SSA) - Nyala
Water and waste water - Part 4: Test method for iron (Fe) by atomic absorption spectrophotometric (AAS) - flame
- 47 -
10 8
7
7
9
9
SNI 6989.59:2008
Air dan air limbah - Bagian 59: Metoda pengambilan contoh air limbah
Water and waste water - Part 59 : Sampling method for waste water
SNI 6989.4-2009
Air dan air limbah - Bagian 4: Cara uji besi (Fe) dengan spektrofotometri serapan atom (SSA)-nyala
Water and waste water - Part 4: Test methods of iron (Fe) by flame-atomic absorption spectrophotometers (AAS)
SNI 6989.6:2009
Air dan air limbah - Bagian 6: Cara uji tembaga (Cu) dengan spektrofotometri serapan atom (SSA)-nyala
Water and waste water - Part 6: Test methods of copper (Cu) by flame-atomic absorption spectrophotometers (AAS)
SNI 6989.7:2009
Air dan air limbah - Bagian 7: Cara uji seng (Zn) dengan spektrofotometri serapan atom (SSA)-nyala
Water and waste water - Part 7: Test methods of zinc (Zn) by flame-atomic absorption spectrophotometers (AAS)
SNI 6989.8-2009
Air dan air limbah - Bagian 8: Cara uji timbal (Pb) dengan spektrofotometri serapan atom (SSA)-nyala
Water and waste water - Part 8: Test methods of lead (Pb) by flame-atomic absorption spectrophotometers (AAS)
SNI 6989.53:2010
Air dan air limbah - Bagian 53: Cara uji krom heksavalen (Cr-VI) dalam contoh uji air dan air limbah dengan Spektrofotometri Serapan Atom (SSA) ekstraksi
Water and waste water - part 53: Test method for hexavalent chromium (Cr-VI) in test samples of water and waste water by Atomic Absorption Spectrometry (AAS) - extraction
SNI 6989.20-2009
Air dan air limbah - Bagian 20: Cara uji sulfat (SO4 2-) secara turbidimetri
Water and waste water - Part 20: Test methods of sulphates (SO4 2-) by turbidimetry
SNI 6989.2:2009
Air dan air limbah - Bagian 2: Cara uji kebutuhan oksigen kimiawi (Chemical Oxygen Demand/COD) dengan refluks tertutup secara spektrofotometri
Water and waste water - Part 2: Test methods of chemical oxygen demand (COD) by closed reflux and spectrophotometry
SNI 7334.1:2009
Tekstil dan Produk Tekstil (TPT) - Bagian 1: Cara uji zat warna azo dengan Kromatografi Gas - Spektrometer Massa (GC-MS)
Textiles and textile products (TTP) - Part 1:Test method for azo dyes by Gas Chromatography - Mass Spectrometer ( GC-MS)
SNI 6989.70:2009
Air dan air limbah - Bagian 70: Cara uji sulfida dengan biru metilin secara spektrofotometri
Water and waste water - Part 70 : Test methods of sulphates (SO4 2-) by methylin blue using spectrophotometers
SNI 6989.74:2009
Air dan air limbah - Bagian 74: Cara uji Nitrat (NO3) dengan secara electroda selektif ion
Water and waste water - Part 74 : Test methods of Nitrate (NO3) by ionic selectif electrode
SNI 6989.75:2009
Air dan air limbah - Bagian 75: Cara uji sulfida secara iodometri
Water and waste water - Part 75 : Test methods for sulphide using iodometer
SNI 6989.71:2009
Air dan air limbah - Bagian 71: Cara uji krom hexavalen (Cr-VI) dalam contoh uji secara spektrofotometri
Water and waste water - Part 71 : Test methods for Chrom hexavalen (CR-VI) in sampling material using spectrophotometer
SNI 06-6989.1-2004
Air dan air limbah - Bagian 1: Cara uji daya hantar listrik (DHL)
Water and waste water - Part 1: Test methods of electrical conductivity
SNI 6989.19-2009
Air dan air limbah - Bagian 19: Cara uji klorida (CI-) dengan metode argentometri
Water and waste water - Part 19: Test methods of chlorides (Cl-) by argentometry
SNI 06-6989.21-2004
Air dan air limbah - Bagian 21: Cara uji kadar fenol secara spektrofotometri
Water and waste water - Test methods of phenol content by spectrophotometry
SNI 6989.34:2009
Air dan air limbah - Bagian 34: Cara uji kadar aluminium secara Spektrofotometer Serapan Atom (SSA) - Nyala
Water and waste water - Part 34: Test methods for aluminium (Al) content by atomic absorption spectrophotometers (AAS) - Burning
SNI 6989.18:2009
Air dan air limbah - Bagian 18: Cara uji nikel (Ni) secara Spektrofotometer Serapan Atom (SSA)-nyala
Water and waste water - Part 18: Test methods for nickel (Ni) using atomic spectrophometry absorption - burning
SNI 6989.17:2009
Air dan air limbah - Bagian 17: Cara uji krom total (Cr- T) secara Spektrofotometer Serapan Atom (SSA)-nyala
Water and waste water - Part 17: Test methods of total chromium (Cr-T) using atomic absorption spectrophotometers (AAS) - burning
SNI 6989.16:2009
Air dan air limbah - Bagian 16: Cara uji kadmium (Cd) secara Spektrofotometri Serapan Atom (SSA)-nyala
Water and waste water - Part 16: Test methods of cadmium (Cd) using atomic absorption spectrophotometers (AAS) - burning
SNI 06-6990.1-2004
Air - Bagian 1: Cara uji pestisida organoklorin secara ekstraksi menggunakan pelarut n-heksan dengan kromatografi gas-spektrofotometer massa (KG-SM)
Water - Part 1: Test methods of organochlorine pesticides with extraction using n-hexane solvent by gas chromatography-mass spectrophotometers (GC-MS)
16
SNI 06-6989.9-2004
Air dan air limbah - Bagian 9: Cara uji nitrit (NO2-N) secara spektrofotometri
Water and waste water - Part 9: Test methods of nitrites (NO2-N) by spectrophotometry
13
SNI 6989.46:2009
Air dan air limbah - Bagian 46: Cara uji kadar timbal (Pb)secara Spektrofotometer Serapan Atom (SSA) - tungku karbon
Water and waste water - Part 46: Test methods of lead (Pb) content using atomic absorption spectrophotometers (AAS) - carbon stoves
SNI 6989.5:2009
Air dan air limbah - Bagian 5: Cara uji mangan (Mn) dengan spektrofotometri serapan atom (SSA)-nyala
Water and waste water - Part 5: Test methods of manganese (Mn) by flame-atomic absorption spectrophotometers (AAS)
SNI 06-6989.22-2004
Air dan air limbah - Bagian 22: Cara uji nilai permanganat secara titrimetri
Water and waste water - Part 22: Test methods of permanganate value by titrimetry
10
SNI 06-6989.3-2004
Air dan air limbah - Bagian 3: Cara uji padatan tersuspensi total (total suspended solid, TSS) secara gravimetri
Water and waste water - Part 3: Test methods of total suspended solid (TSS) by gravimetry
10
SNI 6989.80:2011
Air dan air limbah - Bagian 80: Cara uji warna secara spektrofotometri
Water and waste water - Part 80: Test methods of color by spectrophotometry
16
SNI 6989.79:2011
Air dan air limbah - Bagian 79: Cara uji nitrat (NO3-N) dengan Spektrofotometer UV-Visibel secara reduksi kadmium
Water and waste water - Part 79: Test methods of nitrate (NO3-N) by UV-visible spectrophotometer with a cadmium reduction
16
SNI 6989.78:2011
Air dan air limbah - Bagian 78: Cara uji raksa (Hg) secara spektrofotometri Serapan Atom (SSA) - Uap dingin atau Mercury Analyzer
Water and waste water - Part 78: Test methods of mercury (Hg) by Steam cold or Mercury Analyzer - atomic absorption spectrophotometers (AAS)
15
SNI 6989.77:2011
Air dan air limbah - Bagian 77: Cara uji sianida (CN) secara spektrofotometri
Water and waste water - Part 77: Test methods of cyanide (CN) by spectrophotometry
15
SNI 6989.76:2011
Air dan air limbah - Bagian 76: Cara uji sianida total (CN-T) secara elektroda selektif ion
Water and waste water - Part 76: Test methods of total cyanide (CN-T) by selective ion apparatus
14
SNI 6989.10:2011
Air dan air limbah - Bagian 10: Cara uji minyak nabati dan minyak mineral secara gravimetri
Water and waste water - Part 10: Test method for vegetable oils and mineral oils by gravimetry
14
SNI 6439:2013
Metode uji ion klorida dalam air
Test methods of chloride ions in water
11
22
8
14
ASTM D512-10 IDT
IDT
SNI 06-6856-2002
Metode pengujian kadar nitrat dalam air secara kolorimetri dengan pereaksi Nessler
Test methods of nitrate content in water by using of colorimetry with Nessler reagent
16
SNI 06-6857-2002
Metode pengujian kadar nitrit dalam air secara kolorimetri dengan pereaksi Gries Romeyer
Test methods of nitrite content in water by colorimetry with Gries Romeyer reagent
12
SNI 06-6854-2002
Metode pengujian kadar besi (Fe) dalam air secara kolorimetri dengan thiocyanat
Test methods of iron (Fe) content in water by colorimetry with thiocyanate reagent
9
SNI 06-6855-2002
Metode pengujian kadar mangan (Mn) dalam air secara kolorimetri dengan persulfat
Test methods of manganese (Mn) content in water by colorimetry with persulphate reagent
11
SNI 06-6852-2002
Metode perhitungan natrium karbonat residu dalam air
Calculation methods of sodium carbonate residue in water
13
SNI 06-6875-2002
Cara uji kadar sulfida dalam air dengan iodometri
Test methods of sulphides content in water by iodometry
SNI 06-6876-2002
Cara uji kadar amoniak dalam air dengan elektroda selektif ion
Test methods of ammonia content in water by ion selective electrode
12
SNI 06-6853-2002
Metode perhitungan perbandingan adsorpsi natrium dalam air
Calculation methods of sodium adsorption ratio in water
12
13.060.60
Pengujian sifat fisik air
SNI 6989.65:2009
9
Examintaion of physical properties of water
Air dan air limbah - Bagian 65 : Cara uji krom (Cr) secara Spektrofotometri Serapan Atom (SSA) - tungku karbon
- 48 -
Wter and waste water - Part 65 : Test methods of chrom (Cr) by Atomic Absorbtion Spectrofotometry (AAS) - carbon stoves
10
SNI ISO 10703:2009
Mutu air - penentuan konsentrasi aktifitas radionuklida - Metode spektrometri sinar gamma resolusi tinggi
Water quality -- Determination of the activity concentration of radionuclides -- Method by high resolution gamma-ray spectrometry
ISO 10703:2007 Water quality -- Determination of the activity concentration of radionuclides -- Method by high resolution gamma-ray spectrometry Translation SNI ISO 9697:2009
IDT Mutu air - Pengukuran aktifitas beta total dalam air tawar - Metode sumber tebal
Water quality -- Measurement of gross beta activity in non-saline water -- Thick source method
ISO 9697:2008 Water quality -- Measurement of gross beta activity in non-saline water -- Thick source method Translation SNI ISO 9696:2009
IDT Mutu air - Pengukuran aktivitas alfa total dalam air tawar - Metode sumber tebal
Water quality - Measurement of gross alpha activity in non-saline water -- Thick source method
ISO 9696:2007 Water quality -- Measurement of gross alpha activity in non-saline water -- Thick source method Translation
IDT
SNI 6989.67:2009
Air dan air limbah - Bagian 67 : Cara uji tembaga secara ekstraksi dengan Spektrofotometri Serapan Atom (SSA) - nyala
Water and waste water - Part 67 : Test methods of cuper (Cu) by extraction using Atomic absorbtion Spectrofotometry 9AAS) - burning
9
SNI 06-6989.24-2005
Air dan air limbah - Bagian 24: Cara uji warna secara perbandingan visual
Water and waste water - Part 24: Test methods of colours by visual comparison
9
SNI 06-6989.25-2005
Air dan air limbah - Bagian 25: Cara uji kekeruhan dengan nefelometer
Water and waste water - Part 25: Test methods of turbidity by nephelometers
9
SNI 6989.66:2009
Air dan air limbah - Bagian 66 : Cara uji tembaga (Cu) secara Spektrofotometri Serapan Atom (SSA) - tungku carbon
Water and waste water - Part 66 : Test methods of Cuper (Cu) by Atomic Absorption Spectrofotometry (AAS) - carbon stoves
9
SNI 06-6989.23-2005
Air dan air limbah - Bagian 23: Cara uji suhu dengan termometer
Water and waste water - Part 23: Test methods of temperatures by thermometers
8
SNI 06-6860-2002
Metode pengujian angka bau dalam air
Test methods of odour threshold number in water
9
SNI 06-6859-2002
Metode pengujian angka rasa dalam air
Test methods of flavour threshold number in water
9
13.060.99
Standar lainnya yang berkaitan dengan kualitas air
Other standards related to water qualiy
SNI 03-4819-1998
Tata cara pembuatan ekstrak sedimen untuk pengujian sifat kimia sedimen
Methods for making sediment extracts for chemical properties testing of sediment
12
SNI 4819:2013
Tata cara pembuatan ekstrak sedimen untuk pengujian kimia sedimen
The procedure of producing sediment extracts for chemical sediments testing
12
SNI 19-6738-2002
Metode perhitungan debit andal air sungai dengan analisis lengkung kekerapan
Calculation methods for dependable flow of river water by frequency curve analysis
14
13.080
Soil quality. Pedology
Kualitas tanah. Pedologi
SNI ISO 22300:2012
Keamanan masyarakat - Terminologi
safety for society - Terminology
SNI 7847:2012
Limbah – Spesifikasi hasil pengolahan – Bagian 1: Lumpur (sludge) Instalasi Pengolahan Air Limbah (IPAL) industri pulp dan kertas sebagai pembenah tanah organik
Waste - Specification of waste process -
13.080.01
Kualitas tanah dan pedologi secara umum
Soil quality and pedology in general
SNI 03-6250-2000
Tata cara penentuan kualitas tanah pada lahan bekas tambang untuk revegetasi
Methods for determination of soil quality of mining area for revegetation
SNI 06-6991.1-2004
Tanah - Bagian 1: Cara uji pestisida organoklorin secara ekstraksi menggunakan pelarut n-heksan dengan kromatografi gas-spektrofotometer massa (KG-SM)
Soils - Part 1: Test methods of organochlorine pesticides with extraction using n-hexane solvent by gas chromatography-mass spectrophotometers (GC-MS)
SNI 7751:2012
Tata cara pencatatan akuifer dengan metode logging geolistrik tahanan jenis short normal (SN) dan long normal (LN) dalam rangka eksplorasi air tanah
Registration procedures aquifer with geoelectric resistivity logging method short normal (SN) and long normal (LN) in the context of groundwater exploration
13.080.05
Pengujian tanah secara umum
6 15
Examination of soils in general
SNI 03-6870-2002
Cara uji kelulusan air di laboratorium untuk tanah berbutir halus dengan tinggi tekan menurun
Test methods of water permeability in the laboratory for smooth-grained soils with decrease pressure height
29
SNI 03-6871-2002
Cara uji kelulusan air untuk tanah berbutir kasar dengan tinggi tekan tetap
Test methods of water permeability for coorse-grained soil with constant pressure height
21
SNI 03-6871-2002
Cara uji kelulusan air untuk tanah berbutir kasar dengan tinggi tekan tetap
Test methods of water permeability for coorse-grained soil with constant pressure height
21
SNI 03-6872-2002
Cara uji kepadatan tanah dan batuan di lapangan dengan cara penggantian volume air pada sumur uji
Test methods of soil and rock densities in the field by water substitution volume on test pits
31
SNI 03-6872-2002
Cara uji kepadatan tanah dan batuan di lapangan dengan cara penggantian volume air pada sumur uji
Test methods of soil and rock densities in the field by water substitution volume on test pits
31
SNI 03-6873-2002
Cara uji penentuan persentase kepadatan secara cepat
Test methods of determining density percentage in a fast way
25
SNI 13-6790-2002
Metode penyiapan benda uji dari contoh tanah terganggu
Manuals for preparing test specimens from disturbed soil sample
10
SNI 13-6790-2002
Metode penyiapan benda uji dari contoh tanah terganggu
Manuals for preparing test specimens from disturbed soil sample
10
SNI 03-6873-2002
Cara uji penentuan persentase kepadatan secara cepat
Test methods of determining density percentage in a fast way
25
SNI 03-6870-2002
Cara uji kelulusan air di laboratorium untuk tanah berbutir halus dengan tinggi tekan menurun
Test methods of water permeability in the laboratory for smooth-grained soils with decrease pressure height
29
13.080.10
Karakteristik kimia tanah
Chemical characteristics of soils
SNI 13-4722-1998
Tata penentuan klorida terlarut yang terkandung dalam tanah
Methods for determination of soluble chlorides in soils
2
SNI 03-6249.1-2000
Tata penetapan kadar kalium dalam tanah dengan asam klorida 25 % secara spektrofotometer serapan atom
Methods for determination of potassium content in soil with chloride acid by atomic absorption spectrophotometer
3
SNI 03-6249.2-2000
Tata penetapan kadar kalium dalam tanah dengan asam sitrat 2 % secara spektrofotometer serapan atom
Methods for determination of potassium content in soil with citric acid 2 % by atomic absorption spectrofotometer
3
SNI 13-4721-1998
Tata penentuan kadar nitrogen total dalam tanah
Methods for determination of total nitrogen content in soils
3
SNI 13-4720-1998
Tata penentuan kadar karbon organik dalam tanah
Methods for determination of organic carbon content in soils
3
SNI 6787:2015
Metode uji pH tanah (ASTM D 4972-01 (2007), IDT)
Standard test method for pH of soils (ASTM D 4972-01 (2007), IDT)
22
Test methods for pH of soil for use in metal corrosion testing
11
ASTM D 4972-01 (2007) IDT SNI 03-6879-2002
13.080.20
Metode pengujian pH tanah untuk uji korosi logam
Sifat fisik tanah
Physical properties of soils
SNI 13-4719-1998
Tata penentuan lengas tanah
Methods for moisture determination of soils
SNI 1975:2012
Metode penyiapan secara kering contoh tanah terganggu dan tanah-agregat untuk pengujian
Method for preparation of dry sampling of soils and soils contain with aggregates
13.080.40 SNI 7750:2012
Sifat hidrologis tanah
Hydrologies properties of soils
Tata cara penentuan kadar air batuan dan tanah di tempat dengan metode penduga neutron
- 49 -
Tata method of determining water content of rocks and soil in place with a neutron probe method
2 17
13.080.99
Standar lain yang berhubungan dengan kualitas tanah
Other standards related to soil quality
SNI 06-6992.7-2004
Sedimen - Bagian 7: Cara uji mangan (Mn) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 7: Test methods of manganese (Mn) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 06-6992.3-2004
Sedimen - Bagian 3: Cara uji timbal (Pb) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 3: Test methods of lead (Pb) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 06-6992.2-2004
Sedimen - Bagian 2: Cara uji merkuri (Hg) secara uap dingin (cold vapour) dengan mercury analyzer
Sediment - Part 2: Test methods of mercury (Hg) with cold vapour by mercury analyzer
13
SNI 06-6992.1-2004
Sedimen - Bagian 1: Cara uji pestisida organoklorin secara ekstraksi menggunakan pelarut n-heksan dengan kromatografi gas-spektrofotometer massa (KG-SM)
Sediment - Part 1: Test methods of organochlorine pesticides with extraction using nhexane solvent by gas chromatography-mass spectrophotometers (GC-MS)
16
SNI 06-6992.4-2004
Sedimen - Bagian 4: Cara uji kadmium (Cd) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 4: Test methods of cadmium (Cd) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 06-6992.5-2004
Sedimen - Bagian 5: Cara uji tembaga (Cu) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 5: Test methods of copper (Cu) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 06-6992.6-2004
Sedimen - Bagian 6: Cara uji nikel (Ni) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 6: Test methods of nickel (Ni) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 06-6992.8-2004
Sedimen - Bagian 8: Cara uji seng (Zn) secara destruksi asam dengan spektrofotometer serapan atom (SSA)
Sediment - Part 8: Test methods of zinc (Zn) with acid destruction by atomic absorption spectrophotometers (AAS)
13
SNI 7082:2016
Tata cara penimbunan batuan penutup untuk pencegahan pembentukan air asam tambang pada kegiatan tambang terbuka batubara
The procedure for stockpiling overburden for the prevention of the formation of acid mine water on the open coal mining activities
12
SNI 6621:2016
Tata cara pengelolaan tanah pucuk pada kegiatan pertambangan
The procedure for the management of top soil in mining activities
14
SNI 03-6787-2002
Metode pengujian pH tanah dengan alat pH meter
Test methods of soils pH by pH meter
13.100
9
Occupational safety. Industrial hygiene
Keselamatan kerja. Higiene industri
SNI 19-3997-1995
Pedoman keselamatan kerja listrik pada pentanahan
Guides for electrical occupational safety of grounding
12
SNI 19-3995-1995
Pedoman keselamatan dan kesehatan kerja pada pembangkit listrik
Guides for occupational safety and health of electric generators
47
SNI 19-3996-1995
Pedoman keselamatan dan kesehatan kerja tentang penyimpanan dan pengamanan bahan peledak
Guides for occupational safety and health for storage and safety of explosive materials
97
SNI 19-3993-1995
Pedoman keselamatan dan kesehatan kerja tentang keselamatan kerja las busur listrik
Guides for occupational health and safety of electric arc welding
30
SNI 19-4122-1996
Keselamatan kerja pada pengelasan listrik secara manual
Occupational safety on manual electrical welding
SNI 19-3994-1995
Pedoman keselamatan dan kesehatan kerja pada pertolongan pertama pada kecelakaan
Guides for occupational safety and health of first aid
SNI 13-3620-1994
Cara pemakaian perkakas tangan dengan aman
Application of safety hand tools
2
SNI 19-6602-2001
Kartu tanda bahaya untuk pengamanan
Danger tags for safety
2
SNI 19-6411-2000
Tata cara pemeliharaan pencatatan keselamatan dan kesehatan kerja pada fasilitas pengolahan sampah
Methods for registration of occupational health and safety at solid waste processing facilities
6
SNI 13-7083-2005
Tata cara induksi keselamatan dan kesehatan kerja (K3) pertambangan
Codes of mining occupational and health safety (OHS)
10
SNI 16-7063-2004
Nilai ambang batas iklim kerja (panas), kebisingan, getaran tangan-lengan dan radiasi sinar ultra ungu di tempat kerja
The threshold limit value of work climates (hot), noise, hand-arm vibration and ultraviolet ray radiation at work places
13
SNI ISO/TS 12901-1:2016
Nanoteknologi - Manajemen risiko lingkungan kerja yang diterapkan pada material nano terekayasa - Bagian 1: Prinsip dan pendekatan (ISO/TS 12901-1:2012, IDT)
Nanotechnologies - Occupational risk management applied to engineered nanomaterials Part 1: Principles and approaches (ISO/TS 12901-1:2012, IDT)
53
2 126
ISO/TS 12901-1:2012 SNI ISO/TR 12885:2016
IDT Nanoteknologi - Praktik kesehatan dan keselamatan dalam pengaturan pekerjaan yang terkait nanoteknologi (ISO/TR 12885:2008, IDT)
Nanotechnologies - Health and safety practices in occupational settings relevant to nanotechnologies (ISO/TR 12885:2008, IDT)
108
ISO/TR 12885:2008 IDT SNI 19-1956-1990
Tangga kerja, Keselamatan kerja pada pembuatan dan pemakaian
Ladders, Occupational health in making and utilization
23
SNI 19-1953-1990
Bongkar muat (pelabuhan), Pedoman keselamatan dan kesehatan kerja
Load and unload (harbour), Guides for occupational safety and health
36
SNI 19-1954-1990
Pesawat tenaga dan produksi
Generator and production machines
33
SNI 19-1723-1989
Penyakit akibat kerja, Daftar
Occupational diseases, Lists
43
SNI 19-1955-1990
Perancah, Keselamatan kerja pada pemasangan dan pemakaian
Scaffolds, Occupational safety in installation and usage
40
SNI 19-1717-1989
Mesin gergaji bundar/lingkar untuk pekerjaan kayu, Keselamatan kerja
Circular saw machines for wood working, Ocupational safety
10
SNI 19-1959-1990
Pedoman keselamatan dan kesehatan kerja udara bertekanan tinggi
Guides for occupational safety and health for high pressure gases
14
SNI 19-1957-1990
Kesehatan kerja, Pedoman pengawasan
Occupational health, Guide for control
15
SNI 19-0231-1987
Kegiatan konstruksi, Keselamatan dan kesehatan kerja
Construction activities, Occupational safety and health
92
SNI 13-6912-2002
Operasi seismik yang aman di Indonesia - Keselamatan dan kesehatan kerja
Seismic operation for save conduct in Indonesia - Safety and health
140
American Petroleum Institute (API) RP 500, Shell internationale petroleum maatchappij B.V dan EP 55000/34 MOD SNI 19-1960-1990
Gizi kerja
Nutrition for working condition
SNI 19-1961-1990
Peraturan khusus keselamatan dan kesehatan kerja
Specific rules of occupation health and safety
SNI 19-0230-1987
Pekerjaan penebangan dan pengangkutan kayu, Keselamatan dan kesehatan kerja
Wood cutting and transportation, Occupational safety and health
SNI 19-0229-1987
Pekerjaan di dalam ruangan tertutup, Keselamatan kerja
Working in closed area, Occupational safety
12
SNI 19-0228-1987
Gedung bioskop, Pedoman keselamatan dan kesehatan kerja
Cinema, Guides for occupational safety and health
23
13.110
Keselamatan Mesin - Perlengkapan Listrik dari Mesin - Bagian 11: Persyaratan untuk perlengkapan tegangan tinggi untuk tegangan diatas 1000 V a.b. atau 1500 V a.s dan tidak melebihi 36 kV
Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV
IEC 60204-11:2009, Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV Translation
96 140
Safety of machinery
Keamanan permesinan
SNI IEC 60204-11:2009
25
IDT
- 50 -
46
13.120
Domestic safety
Keselamatan rumah tangga
SNI IEC 60335-2-30:2010
Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-30: Persyaratan khusus untuk pemanas ruangan
Household and similar electrical appliances - Safety - Part 2-30: Particular requirements for room heaters
IEC 60335-2-30 ed 5.0 (2009-11) Translation SNI IEC 60335-1:2010
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 1: Persyaratan umum
Household and similar electrical appliances - Safety - Part 1: General requirements
IEC 60335-1 (2010-05) ed 5.0 + Cor.1 (2010-07) Translation SNI IEC 60335-2-6:2010
IDT Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-6 : Persyaratan khusus untuk kompor pemasak stasioner, tungku lempengan, oven dan peranti sejenis
Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
IEC 60335-2-6 ed 5.2 Consol. With amd 1 & 2 (2008-03) Translation SNI IEC 60335-2-3:2009
IDT Piranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-3: Persyaratan khusus untuk setrika listrik
Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
17
IEC 60335-2-3:2009, Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons Translation SNI IEC 60335-2-32:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-32: Persyaratan khusus untuk peranti pijat
Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
IEC 60335-2-32 ed4.1 Consol. with am1 (2008-03) IDT SNI IEC 60335-2-31:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-31: Persyaratan khusus untuk pengisap asap kompor dan pemasak lain
Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors
IEC 60335-2-31 ed5.0 (2012-11) IDT SNI IEC 60335-2-11:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-11: Persyaratan khusus untuk pengering guling
Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers
IEC 60335-2-11 ed7.0 (2008-07) IDT SNI IEC 60335-2-43:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-43: Persyaratan khusus untuk pengering pakaian dan gantungan handuk
Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
IEC 60335-2-43 ed3.2 Consol. with am1&2 (2008-09) IDT SNI IEC 60335-2-2:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-2: Persyaratan khusus untuk pembersih vakum dan peranti pembersih sedot air
Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances
IEC 60335-2-2 ed6.0 (2009-12) IDT SNI IEC 60335-2-8:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-8: Persyaratan khusus untuk alat cukur, pangkas rambut dan peranti sejenis
Household and similar electrical appliances - Safety - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
IEC 60335-2-8 ed6.0 (2012-12) IDT SNI IEC 60335-2-10:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-10: Persyaratan khusus untuk mesin pembersih lantai dan mesin penggosok basah
Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-10 ed5.1 Consol. with am1 (2008-07) IDT SNI IEC 60335-2-28:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-28: Persyaratan khusus untuk mesin jahit
Household and similar electrical appliances - Safety - Part 2-28: Particular requirements for sewing machines
IEC 60335-2-28 ed4.1 Consol. with am1 (2008-07) IDT SNI IEC 60335-2-45:2012
IDT Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-45: Persyaratan khusus untuk peralatan pemanas portabel (pegun) dan peranti pegun
Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances
IEC 60335-2-45 ed3.1 Consol. with am1 (2008-07) IDT SNI 7609:2011
IDT Peralatan listrik rumah tangga dan sejenis – Keselamatan – Bagian 2-80: Persyaratan khusus untuk kipas angin
Household and similar electrical appliances – Safety – Part 2-80: Particular requirements for fans
IEC 60335-2-80 ed 2.2 (2008-09 MOD SNI IEC 60335-2-59:2010
Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-59 : Persyaratan khusus untuk pembunuh serangga
Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers
IEC 60335-2-59 ed 3.2 Consol. with am1&2 (2009-11) Translation
13.140
Noise with respect to human beings
Bunyi yang berhubungan dengan manusia
SNI 04-3901.3-1995
13.160
IDT
Standar batas tingkat kebisingan untuk kawasan kelistrikan - Bagian 3: Pengukuran tingkat kebisingan di tempat kerja dan lingkungan
Sound level for electrical area - Part 3: Measurement of sound level at working area and environment
Vibration and shock with respect to human beings
Getaran dan kejutan yang berhubungan dengan manusi
SNI 16-7054-2004
Pengukuran percepatan getaran pada tangan
The measurement of hand-arm vibration acceleration
SNI 7231:2009
Metoda pengukuran intensitas kebisingan di tempat kerja
Measurement methods for noisy intensity in working place
13.180
13.200
16
Ergonomics
Ergonomi
SNI 7186:2009
6
Metoda pengukuran percepatan getaran seluruh tubuh pada sikap kerja duduk
Measurement methods on full body vibration acceleration in sitting work attitude
Accident and disaster control
Kecelakaan dan pengendalian bencana
SNI 04-3890.2.6-2002
Klasifikasi kondisi lingkungan - Bagian 2-6: Kondisi lingkungan yang timbul di alam - Getaran dan kejut gempa-bumi
Classification of environmental conditions - Part 2-6: Environmental conditions on earth Vibration and earthquake shocks
11
SNI 10-4837-1998
Fasilitas dan rambu-rambu keselamatan di pelabuhan laut
Safety facilities and safety signs in harbour
12
SNI 13-7081-2005
Investigasi kecelakaan tambang
Mining accident investigation
12
- 51 -
SNI 13-6982.2-2004
Pemeriksaan lokasi bencana gerakan tanah - Bagian 2: Tata cara pelaporan hasil pemeriksaan
The investigation of disaster location of land movements - Part 2: Codes of reporting of investigation results
11
SNI 13-6982.1-2004
Pemeriksaan lokasi bencana gerakan tanah - Bagian 1: Tata cara pemeriksaan
The investigation of disaster location of land movements - Part 1: Investigation codes
19
SNI 7766:2012
Jalur evakuasi tsunami
Tsunami evacuation route
SNI ISO/PAS 22399:2012
Perlindungan masyarakat - Pedoman untuk manajemen kesiapsiagaan insiden dan kontinuitas operasional
Societal security - Guideline for incident preparedness and operational continuity management
31
ISO/PAS 22399 IDT SNI 7743:2011
Rambu evakuasi tsunami
Tsunami evacuation signs
SNI 19-1716-1989
Statistik kecelakaan
Accident statistics
13.220
Protection against fire
Perlindungan terhadap kebakaran
13.220.10
19
Pemadaman kebakaran
Fire-fighting
SNI 13-3619-1994
Penanganan tabung bertekanan
Handling of pressure cylinders
SNI 03-3989-2000
Tata cara perencanaan dan pemasangan sistem springkler otomatis untuk pencegahan bahaya kebakaran pada bangunan gedung
Methods for design and installation of automatic sprinkler systems for fire protection of buildings
83
SNI 03-3988-1995
Pengujian kemampuan pemadaman dan penilaian alat pemadam api ringan
Extinguishing capability tests and evaluation of light fire extinguishers
20
SNI 19-4851-1998
Peralatan pemadam kebakaran di pelabuhan laut
Fire extinguishers in harbours
SNI 19-4846-1998
Persyaratan perlengkapan petugas pemadam kebakaran di kapal
Requirements for firefighter accessories in ships
SNI 03-6382-2000
Spesifikasi hidran kebakaran tabung basah
Specification of wet-barrel fire hydrants
16
SNI 09-7053-2004
Kendaraan dan peralatan pemadam kebakaran - Pompa
Fire-fighting vehicles and equipment - Pumps
74
SNI 10-0972-1989
Alat pemadam kebakaran di kapal, Simbol grafis
Fire extinguisher in ships, Graphical symbols
9
SNI 19-0180-1987
Tabung pemadam api portable dari baja karbon rendah
Low carbon steel portable extinguisher tubes
4
13.220.20
Perlindungan kebakaran
4
4 2
Fire-protection equipment
SNI 03-3987-1995
Tata cara perencanaan, pemasangan pemadam api ringan untuk pencegahan bahaya kebakaran pada bangunan rumah dan gedung
Codes for design, installation of light fire extinguishers for fire protection in houses and buildings
25
SNI 03-3986-1995
Instalasi alarm kebakaran otomatik
Automatic fire alarm installation
59
SNI 03-3985-2000
Tata cara perencanaan, pemasangan dan pengujian sistem deteksi dan alarm kebakaran untuk pencegahan bahaya kebakaran pada bangunan gedung
Methods for design, installation and testing for fire detection and fire alarm systems for fire protection of buildings
90
SNI 03-6571-2001
Sistem pengendali asap kebakaran pada bangunan gedung
Smoke control systems in buildings
59
SNI 19-6470-2000
Tata cara sistem udara bertekanan untuk sarana jalan keluar kedap api
Methods for air pressurization systems of fire-isolated exits
5
SNI 03-6462-2000
Tata cara pemasangan damper kebakaran
Methods for installation of fire dampers
8
SNI 03-6383-2000
Spesifikasi peralatan pengolahan udara individual sebagai sistem pengendalian asap terzona dalam bangunan gedung
Specification of individual air processing equipment as zoned smoke control systems in buildings
8
SNI 03-1745-2000
Tata cara perencanaan dan pemasangan sistem pipa tegak dan slang untuk pencegahan bahaya kebakaran pada bangunan gedung
Methods for design and installation of stand pipe and hose systems for fire protection of buildings
52
SNI 03-1746-2000
Tata cara perencanaan dan pemasangan sarana jalan keluar untuk penyelamatan terhadap bahaya kebakaran pada bangunan gedung
Methods for design and installation of means of egress for rescuing to fire in buildings
73
SNI 03-1735-2000
Tata cara perencanaan akses bangunan dan akses lingkungan untuk pencegahan bahaya kebakaran pada bangunan gedung
Methods for design of building access and environment access for fire protection of buildings
44
SNI 19-6772-2002
Tata cara sistem pemadam api FM 200 (hfc-227 ea)
Procedures for the FM - 200 fire extinguisher systems
41
SNI 03-1736-2000
Tata cara perencanaan dan sistem proteksi pasif untuk pencegahan bahaya kebakaran pada bangunan gedung
Methods for design and pasive protection system for fire protection of buildings
46
SNI 03-6766-2002
Metode pengujian proteksi kebakaran terhadap pintu kebakaran pada bangunan
Test methods of fire protection for fire doors at buildings
12
SNI 19-6718-2002
Spesifikasi damper kebakaran
Specification of the fire dampers
12
13.220.40
Sifat mampu nyala dan bakar dari bahan dan produk
SNI 04-6539.2.1.2-2002
Ignitability and burning behaviour of materials an
Pengujian bahaya kebakaran - Bagian 2: Metode uji - Seksi 1/Lembar 2: Uji mampu-nyala kawat-pijar pada bahan
Fire hazard testing - Part 2: Test methods - Section 1/sheet 2: Glow-wire flammability test on materials
8
IEC 60695-2-1/2:1994, Fire hazards testing - Part 2: Test methods section 1/sheet 2: Glow-wire flammability test on materials Translation SNI 04-6539.1.2-2001
MOD Pengujian bahaya kebakaran - Bagian 1: Pedoman untuk penyiapan persyaratan dan spesifikasi pengujian untuk mengases bahaya kebakaran produk elektroteknik - Seksi 2: Pedoman untuk komponen elektronik
Fire hazard testing - Part 1: Guidance for preparation of requirements and specification of testing for assessing fire hazard of electrotechnical products - Section 2: Guidance for electronic components
5
IEC 60695-1-2: 1982, Fire hazard testing - Part 1: Guidance for hazard of preparation of requirements and test specification for assessing fire hazard of electrotechnical products - Section 2: Guidance for electronic components Translation SNI 04-6539.2.1.1-2001
IDT Pengujian bahaya kebakaran - Bagian 2: Metode uji - Seksi 1/lembar 1: Uji kawat-pijar untuk produk akhir dan pedomannya
Fire hazard testing - Part 2: Test methods - Section 1/sheet 1: Glow-wire end-product tests and guidance
10
IEC 60695-2-1/1: 1994, Fire hazard testing - Part 2: Test methods - Section 1/sheet 1: Glow-wire end-product tests and guidance Translation SNI 04-6539.1.1-2001
IDT Pengujian bahaya kebakaran - Bagian 1: Pedoman untuk penyiapan persyaratan dan spesifikasi pengujian untuk mengases bahaya kebakaran produk elektroteknik - Seksi 1: Pedoman umum
Fire hazard testing - Part 1: Guidance for preparation of requirements and specification of testing for assessing fire hazard of electrotechnical products - Section 1: General guidelines
20
IEC 60695-1-1: 1995, Fire hazard testing - Part 1: Guidance for hazard of preparation of requirements and test specification for assessing fire hazard of electrotechnical products - Section 1: General guidance Translation SNI 04-6539.2.1.0-2001
IDT Pengujian bahaya kebakaran - Bagian 2: Metode uji - Seksi 1/lembar 0: Metode uji kawat-pijar - Umum
Fire hazard testing - Part 2: Test methods - Section 1/sheet 0: Glow-wire test methods General
IEC 60695-2-1/0: 1994, Fire hazard testing - Part 2: Test methods - Section 1/sheet 0: Glow-wire test methods - General Translation
IDT
- 52 -
12
SNI 04-6539.1.3-2001
Pengujian bahaya kebakaran - Bagian 1: Pedoman untuk penyiapan persyaratan dan spesifikasi pengujian untuk mengases bahaya kebakaran produk elektroteknik - Seksi 3: Pedoman penggunaan prosedur pra-seleksi
Fire hazard testing - Part 1: Guidance for preparation of requirements and specification for asssessing fire hazard of electrotechnical products - Section 3: Guidance for use of preselection procedures
8
IEC 60695-1-3: 1986, Fire hazard for testing - Part 1: Guidance for preparation of requirements and specification for asssessing fire hazard of electrotechnical products - Section 3: Guidance for use of pre-selection procedures Translation SNI 8238:2016
IDT Metode uji standar untuk titik nyala dan titik bakar dengan cawan terbuka Cleveland (ASTM D92-12, IDT)
Standard test method for flash and fire points by Cleveland open cup tester (ASTM D9212, IDT)
34
ASTM D92-12 IDT
13.220.50
Ketahanan api dari bahan dan elemen bangunan
Fire-resistance of building materials and elements
SNI 1741:2008
Cara uji ketahanan api komponen struktur bangunan untuk pencegahan bahaya kebakaran pada bangunan rumah dan gedung’
Testing methods for fire resistance tests of structural building components for fire protection in houses and buildings
SNI 1740:2008
Cara uji bakar bahan bangunan untuk pencegahan bahaya kebakaran pada bangunan rumah dan gedung
Testing methods fire test of building materials for fire protection in houses and buildings
SNI 1739:2008
Cara uji jalar api pada permukaan bahan bangunan untuk pencegahan bahaya kebakaran pada bangunan rumah dan gedung
Testing methods for fire spread tests at the surface of building materials for fire protection in houses and buildings
13.230
7 11
Explosion protection
Perlindungan ledakan
SNI 13-6911-2002
26
Penanganan bahan peledak yang aman di Indonesia - Pelaksanaan
Explosive handling for safe conducts in Indonesia - Implementation
84
American Petroleum Institute (API) RP 500, Recommended practice for classification of location for electrical installation at petroleum facilities Translation
13.240
MOD
Protection against excessive pressure
Perlindungan terhadap tekanan berlebihan
SNI 13-6907-2002
Peralatan pelepas tekanan
Pressure relief devices
119
ASME PTC 25, Pressure relief devices Translation
13.260
IDT
Protection against electric shock
Perlindungan terhadap kejutan listrik
SNI 04-6256-2000
Pelindung pengaman kaku untuk pekerjaan bertegangan pada instalasi a.b.b
Rigid protective covers for live working on a.c installation
36
Protection against electric shocks - Common aspects for installation and equipment
44
Effects of current passing through human body and animals - Part 1: General aspects
29
IEC 1229 : 1993-07, Rigid protective covers for live working on a.c installation Translation SNI 04-6961-2003
IDT Proteksi terhadap kejut listrik - Aspek umum untuk instalasi dan perlengkapan
IEC 61140 (2001-10), Protection againts electric shock - Common aspects for installation and equipment Translation SNI 04-6209.1-2000
MOD Pengaruh arus pada manusia dan hewan ternak - Bagian 1: Aspek umum
IEC 479-1: 1994, Effects of current on human being and livestock - Part 1 ; general aspects Translation SNI 04-6256.1-2001
IDT Pekerjaan dalam keadaan bertegangan - Pedoman untuk perencanaan jaminan mutu
Live working - Guidelines for quality assurance plans
9
IEC 61318: 1994, Live working - Guidelines for quality assurance plans Translation SNI IEC 61032:2009
MOD Proteksi bagi manusia dan perlengkapan dengan selungkup - Colok (probe) untuk verifikasi
Protection of persons and equipment by enclosures - Probes for verification
25
IEC 61032:2009, Protection of persons and equipment by enclosures - Probes for verification Translation
13.280
IDT
Radiation protection
Perlindungan terhadap radiasi
SNI 18-2039-1990
Izin konstruksi dan operasi iradiator gamma
Gamma irradiation, Construction operation and permit
SNI 18-6937-2002
Zat radioaktif - Pembungkus - Uji kebocoran isi dan radiasi
Radioactive materials - Packaging - Tests for content leakage and radiation leakage
12
ISO 2855:1976, Radioactive materials -- Packagings - Test for contents leakage and radiation leakage Translation SNI 18-6479-2000
MOD Pakaian proteksi sinar-X untuk pasien
X-ray protective clothing for patients
5
Lead glass for X-ray radiation protection
9
X-ray protectitive apron
3
JIS Z 4830: 1992, X-ray protective clothing for patients Translation SNI 16-6656-2002
MOD Kaca timbal untuk proteksi radiasi sinar-X
JIS R 3701:1900, Lead glass for x-ray protection Translation SNI 18-6478-2000
MOD Apron proteksi radiasi sinar-X
JIS Z 4803: 1980, Medical X-ray protective apron Translation SNI 18-6650.2-2002
MOD Proteksi radiasi - Sumber radioaktif tertutup - Bagian 2 : Metode uji kebocoran
Radiation protection - Sealed radioactive sources - Part 2: Leakage test methods
18
ISO 9978 : 1992 (E), Radiation protection - Sealed radioactive sources - Leakage test methods Translation SNI 18-6480-2000
MOD Metode pengujian ekivalen timbal untuk peralatan proteksi radiasi sinar-X
Test methods of lead equivalent for X-ray protective devices
3
JIS Z-4501-1988 Testing method of lead equivalent for X-ray protective devices Translation SNI ISO 7503.1:2008
IDT Evaluasi kontaminasi permukaan - Bagian 1: Pemancar beta (energi beta maksimum lebih besar dari 0,15 MeV) dan pemancar alfa
Evaluation of surface contamination -- Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters
21
ISO 7503.1, Evaluation of surface contamination -- Part 1: Beta-emitters (maximum beta energy greater than 0,15 MeV) and alpha-emitters Translation SNI 18-7028-2004
IDT Proteksi radiasi - Pakaian untuk proteksi terhadap kontaminasi radioaktif Desain, pemilihan, pengujian dan penggunaan
Radiation protection - Clothing for protection against radioactive contamination - Design, selection, testing and use
27
Enclosures for protection against ionizing radiation - Lead shielding units for 50 mm and 100 mm thick walls
69
ISO 8194: 1987 Translation SNI 18-7102-2005
IDT Perangkat proteksi terhadap radiasi pengion - Unit perisai timbal untuk dinding dengan ketebalan 50 mm dan 100 mm
ISO 7212: 1986, Enclosures for protection againts ionizing radiation - Lead hielding units for 50 mm and 100 mm thick walls Translation
IDT
- 53 -
SNI ISO 20553:2009
Proteksi radiasi - Pemantauan pekerja yang beresiko terpapar kontaminasi internal oleh bahan radioaktif
Radiation protection -- Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material
ISO 20553:2006 Radiation protection -- Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material Translation SNI ISO 17874-3:2013
IDT Peralatan penanganan jarak jauh untuk bahan radioaktif - Bagian 3: Manipulator master-slave elektris
Remote handling equipment for radioactive materials - Part 3: master-slave manipulators electrical
ISO 17874-3:2011 Translation SNI ISO 17874-1:2012
IDT Peralatan penanganan jarang jauh untuk bahan radioaktif - Bagian 1: Persyaratan umum
Remote handling devices for radioactive materials - Part 1: General requirements (ISO 17874-1: 2010, IDT)
22
ISO 17874-1 IDT SNI ISO 21482:2013
Peringatan bahaya radiasi pengion - Simbol tambahan
Ionized-radiation warning - Supplementary symbols
ISO 21482:2007 IDT
IDT
SNI ISO 8769:2013
Sumber acuan - Kalibrasi alat pemantau monitor kontaminasi permukaan Pemancar alfa, beta dan foton
Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
ISO 21482:2007 IDT
IDT
SNI ISO 2919:2013
Proteksi radiologi - Sumber radioaktif terbungkus - Persyaratan umum dan klasifikasi
Radiological protection - wrapped radioactive sources - General requirements and classification
SNI ISO 17874-2:2013
Peralatan penanganan jaak jauh untuk bahan radioaktif - Bagian 2: Manipulator master-slave mekanis
Remote-handling devices for radioactive materials - Part 2: Mechanical master-slave manipulators
ISO 17874-2:2004 IDT
IDT
SNI ISO 17874-5:2015
Peralatan penanganan jarak jauh untuk bahan radioaktif - Bagian 5: Penjepit penanganan jarak jauh (ISO 17874-5:2007, IDT)
Remote handling equipment for radioactive materials - Part 5: Brace remote handling (ISO 17874-5: 2007, IDT)
48
ISO 17874-5: 2007 IDT SNI ISO 3925:2015
Zat radioaktif tidak terbungkus - Identifikasi dan dokumentasi (ISO 3925:2014, IDT)
Radioactive substances are not wrapped - Identification and documentation (ISO 3925: 2014, IDT)
9
ISO 3925:2014 IDT
13.300
Protection against dangerous goods
Perlindungan terhadap barang berbahaya
SNI 13-4121-1996
13.320
Penanganan, penyimpanan dan pengangkutan senyawa sianida padat
3
Alarm and warning systems
Alarm dan sistem tanda bahaya
SNI 04-6626.1.4-2001
Handling, storage and transportation of solid cyanide compound
Sistem alarm - Bagian 1: Persyaratan umum - Seksi 4: Aturan pelaksanaan
Alarm systems - Part 1: General requirements - Section 4: Codes of practices
14
Alarm systems - Part 1: General requirements - Section 3: Environmental tests
41
IEC 60839-1-4: 1989, Alarm systems - Part 1: General requirements - Section 4: Code of practices Translation SNI 04-6626.1.3-2001
MOD Sistem alarm - Bagian 1: Persyaratan umum - Seksi 3: Uji lingkungan
IEC 839-1-3: 1988, Alarm systems - Part 1: General requirements - Section 3: Environmental tests Translation
MOD
SNI 03-6574-2001
Tata cara perancangan pencahayaan darurat, tanda arah dan sistem peringatan bahaya pada bangunan gedung
Codes for the design of emergency lighting, direction sign and hazardous warning systems in buildings
24
SNI 04-6626.1.2-2001
Sistem alarm - Bagian 1: Persyaratan umum - Seksi 2: Unit daya, metode uji dan kriteria unjuk kerja
Alarm systems - Part 1: Power units, test methods and performance criteria
10
IEC 60839-1-2: 1987, Alarm systems - Part 1: General requirements - Section 2: Power units, test methods and performance criteria Translation
13.340
MOD
Protective equipment
Peralatan pelindung
SNI ISO 12402-10:2011
Alat apung personal - Bagian 10: Pemilihan dan aplikasi alat apung personal dan perangkat lainnya
Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant device
28
Personal flotation devices - Part 8: Accessories - Safety requirements and test methods
18
Personal flotation devices - Part 9: Test methods
85
ISO 12402-10:2006 Translation SNI ISO 12402-8:2011
IDT Alat apung personal - Bagian 8: Aksesoris - Persyaratan keselamatan dan metode uji
ISO 12402-8:2006 Translation SNI ISO 12402-9:2011
IDT Alat apung personal - Bagian 9: Metode uji
ISO 12402-9:2006 Translation SNI 19-1721-1989
13.340.01
Noise in working area, Evaluation and control
Peralatan pelindung secara umum
SNI 19-1958-1990
13.340.10
IDT Kebisingan di tempat kerja, Penilaian dan pengendalian
9
Protective equipment in general
Pedoman alat pelindung diri
Guides of self protectors
Pakaian pelindung
11
Protective clothing
SNI 06-6316-2000
Sarung tangan kerja pengrajin sepatu dari kulit
Leather gloves for shoemakers
6
SNI 10-1774-1990
Baju penolong
Life jackets
4
SNI 12-1548-1989
Sepatu bot PVC cetak tahan minyak dan lemak
PVC moulding boots, oil and fat proof
4
13.340.20
Alat pelindung kepala
Head protective equipment
SNI 1811-2007/Amd1:2010 Helm pengendara kendaraan bermotor roda dua, Amandemen 1
Helmets for road vehicle riders, Amandement 1
SNI ISO 3873:2012
Indusrial safety helmets
Helm keselamatan industri
ISO 3873:1977, IDT Translation
13.340.40
IDT
Perlindungan lengan dan telapak tangan
SNI 06-0652-2005
Hand and arm protection
Sarung tangan dari kulit sapi untuk kerja berat
Heavy duty cow leather gloves
- 54 -
14
13.340.50
Perlindungan kaki dan telapak kaki
Leg and foot protection
SNI 7037:2009
Sepatu pengaman dari kulit dengan sistem Goodyear welt
Leather safety shoes with Goodyear welt system
SNI 12-1547-2005
Sepatu bot PVC tahan kimia
PVC boots with chemical resistance
SNI 7327.1:2009
Pelindung jari kaki (toe cap) sepatu pengaman (safety shoes) - Bagian 1: Metode pengujian beban jatuh bebas
Safety shoes toe cap - Part 1: Free fall loading test method
SNI 0111:2009
Sepatu pengaman dari kulit dengan sol karet cetak vulkanisir
Leather safety shoes with rubber sole vulcanized moulding
SNI 7079:2009
Sepatu pengaman dari kulit dengan sol poliuretan dan termoplastik poliuretan sistem cetak injeksi
leather safety shoes with polyurethane soles and thermoplastics polyurethane injection moulding system
SNI ISO 5423:2012
Alas kaki plastik sistem cetak - Sepatu bot poliurethan (PU) dengan lapis atau tanpa lapis untuk keperluan industri secara umum – Spesifikasi
Moulded plastics footwear - Lined or unlined polyurethane boots for general industrial use – Specification (ISO 5423:1992, IDT)
42
Moulded plastics footwear - Lined or unlined poly(vinyl cloride) boots for general industrial use – Specification (ISO 4643:1992, IDT)
31
16
ISO 5423 IDT SNI ISO 4643:2012
Alas kaki plastik sistem cetak - Sepatu bot poli(vinil klorida) dengan lapis atau tanpa lapis untuk keperluan industri secara umum – Spesifikasi
ISO 4643 IDT
- 55 -
17
METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA
METROLOGI DAN PENGUKURAN. FENOMENA FISIKA
17.020
Metrology and measurement in general
Metrologi dan pengukuran secara umum
SNI 19-4257-1996
Angka pilihan untuk temperatur uji
Preferred number for test temperatur
3
SNI 19-6408-2000
Tata cara penentuan suku bilangan yang signifikan terhadap nilai batas yang disyaratkan
Methods for determination of number to be considered in specified limiting values
6
SNI ISO 10012:2009
Sistem manajemen pengukuran - Persyaratan untuk proses pengukuran dan peralatan ukur
Measurement management systems -- Requirements for measurement processes and measuring equipment
ISO 10012:2003 Measurement management systems -- Requirements for measurement processes and measuring equipment Translation
IDT
SNI 19-0368-1989
Angka pilihan
Preferred numbers
SNI 19-6784-2002
Metode pengujian koagulasi, flokulasi dan filtrasi bertekanan
Test methods for coagulation, flocculation and presurred filtration
SNI 19-0887-1989
Aturan pembulatan nilai bilangan
Rules for rounding of numerical value
2
SNI 19-0369-1989
Angka pilihan dan deret angka pilihan, Petunjuk penggunaan
Preferred number and series of preferred number, Guide to use
5
SNI 19-0370-1989
Angka pilihan dan angka pilihan yang lebih bulat, Petunjuk pemilihan
Preferred numbers and series containing more rounded values of preferred number, Guide for choosing
6
17.040
Pengukuran panjang dan sudut secara umum
SNI 19-6457-2000
14
Linear and angular measurements
Pengukuran panjang dan sudut
17.040.01
6
Linear and angular measurements in general
Metode dasar pengukuran tubuh manusia untuk rancangan teknologis
Methods for basic human body measurement for technological design
20
ISO 7250:1996, Basic human body measurement for technological design Translation
17.040.10
IDT
Batas dan suaian
Limits and fits
SNI 05-3522-1994
Batas dan suaian - Seri sudut dan kemiringan pada pasak dan prisma
Limit and fits - Series of angles and slopes on wedges and prism
SNI 05-3519-1994
Seri kemiringan konis dan sudut kemiringan
Series of conical tapers and taper angles
SNI 05-3224-1992
Sistem toleransi kerucut untuk benda tirus dari C=1:3 sampai 1:500 dan panjang dari 6 sampai 630 mm
System of cone tolerances for conical workpieces from C=1:3 to 1:500 and lengths from 6 to 630 mm
SNI 05-3520-1994
Pemilihan daerah toleransi untuk kegunaan umum
Selection of tolerances zones for general purpose
SNI 05-3510-1994
Sistem batas dan suaian. Bagian 1: Umum, toleransi dan deviasi
Limits and fits system. Part 1: General, tolerance and deviation
29
SNI 05-2641-1992
Sistem toleransi ukuran coran
System of dimensional tolerances of castings
12
SNI 05-2640-1992
Penyimpangan ukuran yang diperbolehkan tanpa tanda toleransi untuk produk logam sinter
Permissible deviation without tolerance indication for metalic sintered products
3
SNI 05-2639-1992
Penyimpangan ukuran yang diperbolehkan tanpa tanda toleransi untuk coran cetak permanen
Permissible deviation without tolerance indication for die casting
5
SNI 05-2638-1992
Penyimpangan ukuran yang diperbolehkan tanpa tanda toleransi untuk plat baja potong gas
Permissiable deviation without tolerance indication for gas cut steel plates
6
SNI 05-2637-1992
Penyimpangan ukuran yang diperbolehkan tanpa tanda toleransi untuk kerja pres dari lembaran logam
Permissiable deviation without tolerance indication for press working of sheet metal
2
SNI 05-2636-1992
Penyimpangan ukuran yang diperbolehkan tanpa tanda toleransi pada besi tuang
Permissible deviation without tolerance indication for iron castings
3
SNI 05-3225-1992
Sistem batas dan suaian Inspeksi benda kerja sederhana
Limit and fit system for inspection of plain working objects
SNI 05-1881-1990
Penyimpangan ukuran yang diperbolehkan untuk ukuran tanpa tanda toleransi, Ketentuan umum
Permissible deviation in dimension without tolerance indication, General rules
3
SNI 05-1818-1990
Deviasi yang diijinkan untuk ukuran tanpa penandaan toleransi, Peryaratan umum
Permissible deviations in dimension without tolerance mark, General requirements
2
SNI 05-1893-1990
Penyimpangan (deviasi) jarak antar titik pusat
Deviations of distance between centre distance
2
17.040.20
Sifat-sifat permukaan
6 3 20 2
39
Properties of surfaces
SNI 05-2619-1992
Kekasaran permukaan - Definisi alat ukur dengan metode profil
Surface roughness - Definition for measuring instrument by profile method
SNI 05-2618-1992
Kekasaran permukaan - Klasifikasi peralatan dan perlengkapan ukur bagi pengukuran parameter geometri permukaan benda
Surface roughness - Classification of measuring devices and apparatus for geometrical parameter measurement of specimens surface
3
SNI 05-2621-1992
Kekasaran permukaan, Parameter dan peraturan umum untuk menetapkan persyaratan
Surface roughness, Parameters and general rules for specifying requirements
5
SNI 05-1886-1990
Definisi dan penandaan kekasaran permukaan
Surface roughness, Definition and marking
6
17.040.30
Alat ukur
Measuring instruments
SNI 05-2617-1992
Jangka geser kedalaman
Depth move callipers
12
SNI 05-2614-1992
Mikro indikator
Microindicator
16
SNI 05-2613-1992
Balok ukur
Gauge blocks
SNI 07-2612-1992
Baja pelurus
Straighten steel
SNI 05-3223-1992
Pembacaan kaliper skala lingkar 0,001 inci dan 0,0001 inci
Dial gauges reading on 0,001 inch and 0,0001 inch
6
SNI 05-4243-1996
Alat ukur pembanding untuk kekasaran permukaan benda kerja hasil permesinan
Reference measuring instrument for surface roughness of machining product working specimens
7
SNI 05-4244-1996
Alat ukur pembanding untuk kekasaran permukaan benda kerja hasil pengikisan bunga api elektro (spark - eroded), penembakan peluru (shoot blasted), penembakan butiran (grit blasted) dan poles (polish
Reference measuring instrument for surface roughness of spark eroded, shoot blasted, grit blasted and polished working specimens
6
SNI 05-3511-1994
Kepala mikrometer
Micrometer heads
11
SNI 05-3513-1994
Jangka sorong
Vernier callipers
18
SNI 05-4245-1996
Alat ukur pembanding untuk kekasaran permukaan hasil cor logam
Reference measuring instrument for surface roughness of metal cast product
SNI 05-4355-1996
Jam ukur uji tipe lengan
Lever type dial test indicators
12
SNI 05-3512-1994
Mikrometer Luar
Outside micrometer
13
SNI 19-4783-1998
Tata cara pengukuran kekasaran permukaan dengan alat jarum sentuh (stylus)
Measuring method for surface roughness using stylus instrument
- 56 -
8 10
7
9
SNI 05-6098-1999
Penyiku carpenter
Carpenter's squares
SNI 05-4398-1996
Jam ukur
Dial gauges
SNI 05-4879-1998
Batang sinus
Sine bars
6
SNI 05-4972-1999
Penyiku
Squares
17
SNI 05-4531-1998
Mikrometer kedalaman
Depth micrometer
15
SNI 05-4391-1996
Pendatar presisi
Precision level
6
SNI 05-4533-1998
Alat untuk mengukur kekasaran permukaan dengan metode profil - Alat jarum sentuh (stylus) transformasi progresif - Alat perekam profil
Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
7
17.060
9 11
Measurement of volume, mass, density, viscosity
Pengukuran volume, masa, kerapatan, viskositas
SNI 05-2616-1992
Hidrometer berat jenis
Specific gravity hydrometers
SNI 05-3258-1994
Meteran pita baja
Steel ribbon meter
SNI 05-3243-1994
Mistar metal
Metal ruler
18
SNI 05-3843-1995
Alat ukur tinggi
High measuring devices
15
SNI 19-4956-1998
Cara uji berat jenis relatif, berat jenis dan kerapatan (cairan yang homogen)
Test method for relative density, specific gravity and density (of homogeneous liquid)
SNI 8242:2016
Metode uji standar untuk viskositas kinematik dari cairan transparan dan tak tembus pandang (perhitungan viskositas dinamik) (ASTM D445-11a, IDT)
Standard test method for kinematic viscosity of tranparent and opaque liquids (and calculation of dynamic viscosity) (ASTM D445-11a, IDT)
45
Standard practice for calculating viscosity index from kinematic viscosity at 40 and 100 degree celcius (ASTM D2270-10, IDT)
21
5 6
4
ASTM D445-11a IDT SNI 8251:2016
Prosedur standar untuk perhitungan indeks viskositas dari viskositas kinematik pada 40 derajat celcius dan 100 derajat celcius (ASTM D2270-10, IDT)
ASTM D2270-10 IDT
17.100
Measurement of force, weight and pressure
Pengukuran gaya berat dan tekanan
SNI 05-6093-1999
Timbangan badan penunjukan pegas
Personal weighing machines
8
SNI 19-6463-2000
Tata cara kalibrasi manometer baurdon dengan alat dead weight tester
Method for calibration of bourdon manometers by dead weight tester
8
SNI 05-6414-2000
Spesifikasi timbangan yang digunakan pada pengujian bahan
Specification for weighing devices used in the testing of materials
SNI 05-6056-1999
Kalibrasi peralatan standar gaya yang digunakan untuk verifikasi mesin uji satu sumbu
Calibration of force standard instruments used for verification of one fuse testing equipment
17.120
Measurement of fluid flow
Pengukuran aliran fluida
SNI IEC 60739:2008
7 16
Alat ukur laju cacah digital - Karakteristik dan metode uji
Digital counting ratemeter - Test method and characteristic
46
IEC 60739, Digital counting ratemeter - Test method and characteristic Translation
17.120.01
IDT
Pengukuran aliran fluida pada umumnya
Measurement of fluid flow in general
SNI 03-3408-1994
Metode pengukuran kecepatan aliran pada model fisik dengan alat ukur arus tipe baling-baling
Methods of measurement for flow velocity on physical models by current measuring instrument propeler types
16
SNI 3410:2008
Tata cara pengukuran pola aliran pada model fisik
Methods of measurement for flow pattern on physical models
17
SNI 3409:2008
Tata cara pengukuran kecepatan aliran pada uji model hidraulik fisik dengan tabung pitot
Code of conducts of measurement for flow velocity on physical models using Pitot tubes
16
17.120.10
Aliran dalam saluran tertutup
Flow in closed conduits
SNI 19-4201-1996
Pengukuran aliran air dalam saluran tertutup - Meter untuk air minum dingin. Bagian 2 : Persyaratan instalasi
Measurement of water flow in closed conduits. Meter for cold potable water. Part 2 : Installation requirements
SNI 05-4017-1996
Pengukuran laju aliran gas dengan Nosel Venturi aliran kritis
Measurement of gas fluid flow by Nosel Ventury critical flow
30
SNI 19-4197-1996
Pengukuran aliran air dalam saluran tertutup - Meter untuk air minum dingin Bagian 3 : Peralatan dan metode uji
Measurement of water flow in close conduit - Meters for cold potable water - Part 3 : Equipment and test method
37
SNI 19-4203-1996
Penentuan laju aliran fluida dalam saluran tertutup berpenampang lintang bentuk lingkaran - Metode pengukuran kecepatan di satu titik pada penampang lintang
Determination of flow rate of fluids in closed conduits of circular cross-section - Method of velocity measurement at one point of the cross-section
20
SNI 19-4198-1996
Pengukuran aliran air dalam saluran tertutup - Alat ukur air dingin yang dapat diminum. Bagian 1 : Spesifikasi
Measurement of water flow in closed conduits. Meters for cold potable water. Part 1 : Specifications
17
SNI 19-3632-1994
Pengukuran laju aliran cairan dalam kanal tertutup dengan menggunakan metode penimbangan dinamis
Measurements of fluid flow in closed conduit by dynamic balancing method
28
17.120.20
Aliran dalam saluran terbuka
8
Flow in open channels
SNI 19-4207-1996
Pengukuran aliran cairan dalam saluran terbuka - Metode luas - kecepatan
Measurement of liquid flow in open channel - Velocity area methods
56
SNI 19-4200-1996
Pengukuran aliran cairan dalam saluran terbuka dengan menggunakan bendungan dan flume - Bendung berprofil segitiga
Measurement of liquid flow in open channels by weirs and flumes. Triangular profile weirs
29
SNI 19-4199-1996
Pengukuran aliran fluida dalam saluran terbuka - Metode pengukuran sedimen tersuspensi
Measurement of fluid flow in open channels - Methods for measurement of suspended sediment
18
SNI 19-4204-1996
Pengukuran aliran cairan dalam saluran terbuka - Kalibrasi meter - arus elemen - berputar dalam tangki lurus terbuka
Measurement of fluid flow in open channel - Calibration of rotating - element current meters in straight open tanks
17
SNI 03-2819-1992
Metode pengukuran debit sungai dan saluran terbuka dengan alat ukur arus tipe baling-baling
Measurement methods for rate of flow of river and open channel by flow measuring apparatus, propeller type
34
SNI 19-4205-1996
Pengukuran aliran cairan dalam saluran terbuka - Meter arus jenis mangkok dan jenis baling - baling
Measurement of fluid flow in open channel - Rotating - element current - meters
SNI 19-4202-1996
Pengukuran aliran air dalam saluran terbuka - Pengukuran kedalaman cairan secara langsung dan penerapan penggantung
Measurement of water flow in open channel - Direct flow depth measurement
10
SNI 03-2820-1992
Metode pengukuran debit sungai dan saluran terbuka dengan pelampung permukaan
Measurement methods for rate of flow of river and open channel by surface buoy
30
SNI 19-4208-1996
Pengukuran aliran air dalam saluran terbuka dengan menggunakan sistem bendung dan saluran venturi - Bendung pelat tipis
Measurement of water flow in open channel using weirs and venturi flumes systems - Thin plate weirs
35
- 57 -
9
SNI 03-2822-1992
Metode pembuatan lengkung debit dan tabel sungai/saluran terbuka dengan analisis grafis
Methods for making rating curves and tables of river/open channel by graphic analysis
20
SNI 19-4206-1996
Pengukuran aliran cairan dalam saluran terbuka - Metode pengenceran untuk pengukuran aliran tetap - Metode injeksi pada kecepatan konstan
Measurement of fluid flow in open channel - Tracer dilution methods for the measurement of steady flow - Injection method at constant velocity
40
SNI 05-6395-2000
Spesifikasi alat ukur debit orifice
Specification of orifice discharge measuring instrument
26
17.140
Acoustics and acoustic measurements
Akustik dan pengukuran akustik
17.140.01
Pengukuran akustik dan pengurangan bunyi secara um
Acoustics measurements and noise abatement in gene
SNI 05-2962-1992
Alat ukur bunyi
Sound level meter
25
SNI 19-1654-1989
Tingkat tekanan bunyi yang diboboti (Weighted A), Cara pengukuran dan penguraian
Weighted sound pressure level (weighted A), Measurement and analysis method
13
17.140.20
Bunyi yang di keluarkan oleh mesin dan peralatan
SNI 04-6255.1-2000
Noise emitted by machines and equipment
Akustik - Pengukuran tingkat tekanan bunyi dari instalasi turbin gas untuk mengevalusi kebisingan lingkungan - Metode survei
Acoustics - Measurement of sound pressure power level of gas turbines installation to evaluate environmental noise - Survey methods
11
IEC, IEV - Acoustic - Measurement of sound pressure power levels of gas turbine installations to evaluate environmental noise - Survey methods Translation SNI 04-6255.2-2000
IDT Akustik - Pengukuran kebisingan udara yang dipancarkan oleh turbin uap dan mesin yang digerakkan
Acoustics - Measurement of airbone noise emitted by steam turbines and driven machinery
17
IEC 61063: 1991, Acoustics - Measurement of airbone noise emitted by steam turbines and driven machineries Translation
17.140.30
IDT
Bunyi yang dikeluarkan oleh alat transportasi
Noise emitted by means of transport
SNI 8150:2015
Pengukuran tingkat dan kawasan kebisingan di sekitar bandar udara
Measurement of the noise level and the area around airports
16
SNI 19-6878-2002
Metode uji tingkat kebisingan jalan L10 dan Leq
Test methods for L10 and Leq road noise level
13
17.160
Vibrations, shock and vibration measurements
Getaran, kejutan dan pengukuran getaran
SNI 05-3272-1994
Getaran dan kejutan - Isolator - Prosedur untuk menentukan karakteristik
Vibration and shock - Insulators - Procedure for specifiying character
16
SNI 05-2298-1991
Getaran mekanis mesin rotasi dan mesin bolak-balik, Persyaratan instrumentasi untuk pengukuran tingkat getaran
Mechanical vibration of rotating and reciprocating machinary, Requirements for instruments for measuring vibration severity
15
SNI 05-1629-1989
Getaran mekanis dari mesin-mesin tertentu dengan ketinggian poros 56 mm dan lebih mengenai pengukuran, penilaian dan batas kekuatan getaran
Mechanical vibration of specific machines with minimum shaft height 56 mm, vibration power measurement, assessment and tolerances
17.180
Optics and optical measurements
Optik dan pengukuran optik
17.180.20
Warna dan pengukuran cahaya
SNI 16-7062-2004
17.180.30
5
Colours and measurement of light
Pengukuran intensitas penerangan di tempat kerja
The measurement of lighting intensities at work places
Alat ukur optik
13
Optical measuring instruments
SNI 15-4251-1996
Kaca optik sejajar
Optical parallels
5
SNI 05-4373-1996
Kaca optik rata
Optical flat
6
17.200
Thermodynamics and temperature measurements
Termodinamika dan pengukuran suhu
SNI 19-1141-1989
17.200.10
Suhu, Cara uji
Temperature, Test method
Panas. Kalorimetri
SNI 16-7061-2004
Pengukuran iklim kerja (panas) dengan parameter indeks suhu basah dan bola
The measurement of work climates (hot) by wet bulb globe temperature index parameters
SNI 7989:2014
Prosedur pemetaan tingkat kesesuaian agroklimat
Level of agro-climatic suitability mapping procedure
17.200.20
Alat pengukuran suhu Suhu acu standar untuk pengukuran panjang pada industri
Standard reference temperature for length measurement in industry
SNI 19-6421-2000
Spesifikasi standar termometer
Standard specification of thermometers
17.220.01
17.220.20
1 64
Electricity. Magnetism. Electrical and magnetic me
Listrik. Magnetisme. Pengukuran listrik dan magnit Listrik. Magnetisme. Aspek umum
SNI 04-6185.2-1999
11
Temperature-measuring instruments
SNI 19-3518-1994
17.220
4
Heat. Calorimetry
Electricity. Magnetism. General aspects
Arus hubung-singkat - Kalkulasi pengaruh - Bagian 2: Contoh kalkulasi
Pengukuran besaran listrik dan magnit
Short-circuit current - Calculation of effects - Part 2: Examples of calculation
53
Measurement of electrical and magnetic quantities
SNI 04-3846-1995
Papan meter konsumen
Consumer's electric meter boards
49
SNI 04-3889.1-1995
Instrumen pengukur listrik tidak langsung - Bagian 1: Syarat umum instrumen penunjuk tidak langsung
Indirect acting electrical measuring instruments - Part 1: General requirements for indirect acting indicating instrument
53
SNI 04-3588-1994
Alat penunjuk kebutuhan maksimum kelas 1,0
Maximum demand indicating instrument, class 1,0
9
SNI 04-3584-1994
Meter energi listrik, Kamar uji
Electrical energy meters, Test room
4
SNI 04-3876-1995
Persyaratan khusus untuk meter frekuensi analog penunjuk langsung dan lengkapannya
Particular requirements for frequency meters direct acting indicating analogue and their accessories
6
SNI 04-3886-1995
Lambang meter listrik arus bolak-balik
Symbols for alternating current electric meters
9
SNI 04-3877-1995
Persyaratan khusus untuk lengkapan instrumen ukur listrik analog penunjuk langsung
Particular requirements for accessories of direct acting indicating analogue electrical measuring instruments
7
SNI 04-3887-1995
Jembatan arus searah untuk pengukuran resistans
Direct current bridges for measuring resistance
SNI 04-3878-1995
Persyaratan khusus untuk instrumen ukur listrik analog penunjuk langsung fungsi ganda dan lengkapannya
Particular requirements for double function direct acting indicating analogue electrical measuring instruments and their accessories
5
SNI 04-3863-1995
Transduser pengukuran listrik untuk mengubah besaran listrik AC ke besaran listrik DC, Bagian 1: Tujuan umum transduser
Electrical measuring transducers for converting AC electric quantities into DC electric quantities, Part 1 : General purpose transducers
24
SNI 04-3861-1995
Meter var-jam (energi reaktif)
Var-hour (reactive energy) meters
20
SNI 04-3863.2-1996
Transduser pengukuran listrik untuk mengubah besaran listrik AC ke besaran DC - Bagian 2: Transduser pasangan luar dan lingkungan yang buruk
Electrical measuring transducers for converting AC electric quantities to DC electric quantities - Part 2: Outside transducers and bad environment
17
SNI 04-3875-1995
Persyaratan khusus untuk ohmmeter (meter impedans) dan meter konduktans analog penunjuk langsung dan lengkapannya
Particular requirements for ohmmeters (impedance meter) and conductance meter direct acting indicating analogue and their accessories
SNI 13-4690-1998
Alat perekam muka air tanah otomatis tipe vertical (memakai pelampung)
Vertical type ground water level recording equipment (using buoys)
- 58 -
13
7 16
SNI 04-6530-2001
Pengukuran medan listrik frekuensi daya
Measurement of power-frequency electric fields
26
Oscilloscopes and peak voltmeter for impulse tests
31
Alternating current static Var-hour meter for reactive energy (class 2 and 3)
40
Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters
13
IEC 60833: 1987, Measurement of power-frequency electric fields Translation SNI 04-6628-2001
IDT Osiloskop dan voltmeter puncak untuk uji impuls
IEC 60790: 1984, Oscilloscopes and peak voltmeters for impulse tests Translation SNI 04-6535-2001
IDT Meter Var-jam statik arus bolak-balik untuk energi reaktif (kelas 2 dan 3)
IEC 61268: 1997, Alternating current static Var-hour meter for reactive energy (class 2 and 3) Translation SNI IEC 60051-3:2009
IDT Penunjuk Langsung Peralatan Pengukuran Listrik Analog dan Lengkapannya - Bagian 3: Perlengkapan khusus untuk wattmeter dan varmeter
IEC 60051-3:2009, Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3: Special requirements for wattmeters and varmeters Translation SNI IEC 62056-21:2009
IDT Meter Listrik - Pertukaran data untuk pembacaan meter, kendali beban dan tarif - Bagian 21: Pertukaran data lokal langsung
Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange
69
IEC 62056-21:2009, Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange Translation SNI IEC 60051-1:2009
IDT Instrumen ukur listrik analog penunjuk langsung dan lengkapannya - Bagian 1: Definisi dan persyaratan umum bersama semua bagiannya
Direct acting indicating analogue electrical measuring instruments and their accessories Part 1: Definitions and general requirements common to all parts
46
IEC 60051-1:2009, Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts Translation SNI IEC 61786:2011
IDT Pengukuran medan instrumen dan listrik frekuensi-rendah yang terpapar pada manusia - Persyaratan khusus untuk instrumen dan Pedoman pengukuran
Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements
IEC 61786 (1998-08) Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements Translation SNI IEC 62053-11:2011
IDT Perlengkapan meter listrik – Persyaratan khusus – Bagian 11: Meter elektromekanik untuk energy aktif (kelas 0.5, 1 dan 2)
Electricity metering equipment (a.c.) – Particular requirements – Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
IEC 62053 -11 ed 1.0 (2003-01) Translation SNI IEC 62052-11:2011
IDT Perlengkapan meter listrik (a.b) – Persyaratan umum, pengujian dan kondisi pengujian – Bagian 11: Pelengkapan meter
Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment
IEC 62052-11 ed 1.0 (2003-02) Electricity metering equipment (AC) – General requirements, tests and test conditions – Part 11: Metering equipment Translation SNI IEC 62055-41:2012
IDT Meter listrik - Sistem pembayaran - Bagian 41: Spesifikasi transfer standar (STS) - Protokol lapisan aplikasi untuk sistem pembawa token satu arah (IEC 62055-41:2007, IDT)
Electricity metering - Payment systems - Part 41: Standard transfer specification (STS) Application layer protocol for one way token carrier systems
212
IEC 62055-41:2007 SNI IEC 62053-21:2011
IDT Perlengkapan Meter Listrik (A.B) -Persyaratan Khusus - Bagian 21: Meter Statik untuk energi Aktif (kelas 1 dan 2)
Electricity metering equipment (a.c.) -Particular requirements - Part 21: Static meters for active energy (classes 1 dan 2)
IEC 62053-21 ed 1.0 (2003-01) Electricity metering equipment (a.c.) -Particular requirements - Part 21: Static meters for active energy (classes 1 dan 2) Translation SNI IEC 62053-22:2011
IDT Perlengkapan Meter Listrik (a.b)-Persyaratan khusus-Bagian 22: Meter elektromekanik untuk energi aktif (kelas 0,2 s dan 0,5 s)
Electricity metering equipment (a.c.) – Particular requirements – Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
IEC 62053-22 (2003-01) Translation SNI IEC/TS 6205641:2013
IDT Meter listrik - Pertukaran data untuk pembacaan meter, kendali tarif dan beban - Bagian 41: Pertukaran data menggunakan jaringan area luas: Jaringan telepon publik dialihkan (PSTN) dengan protokol LINK+
Electricity meter - Data exchange for meter reading, tariff and load control - Part 41: Exchange of data using a wide area network: the public switched telephone network (PSTN) with LINK + protocol
IEC/TS 62056-41:1998 Translation SNI IEC/TS 6205642:2013
IDT Meter listrik - Pertukaran data untuk pembacaan meter, kendali beban dan tarif - Bagian 42 : Layanan lapisan fisik dan prosedur untuk pertukaran data asinkron berorientasi sambungan
Electricity metering - Data exchange for meter reading, tarif and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange
35
IEC 62056-42:2002 Translation SNI IEC 62055-51:2012
IDT Pengukuran listrik - Sistem pembayaran - Bagian 51: Spesifikasi transfer standar (STS) - Protokol lapisan fisik untuk pembawa token kartu magnetik dan numerik satu-arah (IEC 62055-51:2007, IDT)
Electricity metering - Payment system - Part 51: Standard transfer specification (STS) Physical layer protocol for one-way numeric and magnetic card token carriers
IEC 62055-51:2007 IDT SNI 04-1698-1989
Meter fasa, meter faktor daya dan sinkronskop penunjuk langsung analog dan lengkapannya, Syarat khusus
Phasemeter, power factor meter and analogue direct indication synchronscopes and its accessories, Particular requirements
12
SNI 04-1695-1989
Instrumen ukur listrik penunjuk langsung analog dan lengkapan, Syarat umum
Analogue direct indication electrical instrument and its accessories, General requirements
27
SNI 04-1696-1989
Meter watt dan varh penunjuk langsung analog dan lengkapan, Syarat khusus
Watt metre and varh analogue direct indication and its accesories, Particular requirements
8
SNI 04-1697-1989
Meter ampere dan meter volt, Syarat khusus
Amperemeter and Voltmeter, Particular requirements
10
SNI 04-1889-1990
Transduser mekanik listrik untuk mengukur getaran dan shock (kejut), Cara uji menentukan karakteristik
Electromechanical transducers for measuring vibration and shock, Test methods for determination of characteristics
23
17.240
Radiation measurements
Pengukuran radiasi
SNI 18-2038-1990
Kalibrasi alat ukur radiasi, pengukuran keluaran sumber radiasi, dan fasilitas kalibrasi tingkat nasional
Radiation measuring instrument, Measurement of radiation sources output and calibration facilities at national level
23
SNI 18-6938-2002
Survaimeter portable radiasi sinar-X atau sinar-Y - Spesifikasi
Specification of X-rays or Y-rays radiation portable surveymeter
11
ANSI N 13.4-1971, American Nasional Standard for the specification of portable X or y - Radiation Survey Instruments Translation SNI 04-6265.1-2000
MOD Instrumentasi nuklir - Sistem pengukuran dan instrumen listrik yang menggunakan sumber radiasi pengionan - Aspek umum
Nuclear instrumentation - Electrical measuring systems and instruments utilizing radiation sources - General aspects
IEC 476: 1993, Nuclear instrumentation - Electrical measuring systems and instruments utilizing radiation sources - General aspects Translation
IDT
- 59 -
19
SNI 18-2032-1990
Ketentuan pabrik Kaos lampu
Specification for lamp mantel plants
17
SNI 04-6265.2-2000
Instrumentasi nuklir - Persyaratan konstruksi untuk menunjang perlindungan personal terhadap radiasi ionisasi
Nuclear instrumentation - Constructional requirements to afford personal protection agains iozining radiation
12
IEC 405: 1972, Nuclear instrument - Constructional requirements to afford personal protection against iozining radiation Translation SNI ISO/ASTM 51900:2010
IDT Praktik untuk dosimetri pada fasilitas iradiasi makanan dan produk pertanian
Guide for dosimetry in radiation research on food and agricultural products
ISO/ASTM 51900:2009 Translation SNI ISO 6980-3:2014
IDT Energi nuklir - Radiasi partikel beta acuan - Bagian 3: Kalibrasi dosimeter personel dan dosimeter area dan penentuan tanggapannya sebagai fungsi sudut datang dan energi radiasi beta (ISO 6980-3:2006, IDT)
Nuclear Energy - a reference beta particle radiation - Part 3: Calibration of personnel dosimeters and area dosimeters and determination of response as a function of the incident angle and energy beta radiation (ISO 6980-3: 2006, IDT)
ISO 6980-3:2006 IDT SNI ISO/ASTM 51707:2008
Pedoman estimasi ketidakpastian pada dosimetri untuk pemrosesan dengan radiasi
Guide for estimating uncertainties in dosimetry for radiation processing (ISO/ASTM 51707:2005, IDT)
ISO/ASTM 51707:2005 Guide for estimating uncertainties in dosimetry for radiation processing Translation
IDT
SNI 16-7060-2004
Pengukuran radiasi sinar ultra ungu di tempat kerja
The measurement of ultraviolet ray radiation at work places
SNI ISO/ASTM 51261:2008
Pedoman standar untuk pemilihan dan kalibrasi sistem dosimetri dalam pemrosesan dengan radiasi
Guide for selection and calibration of dosimetry systems for radiation processing (ISO/ASTM 51261:2002, IDT)
9
ISO/ASTM 51261:2002 Guide for selection and calibration of dosimetry systems for radiation processing Translation SNI ISO/ASTM 51818:2008
IDT Praktik dosimetri pada fasilitas berkas elektron untuk pemrosesan dengan radiasi pada energi antara 80 keV sampai dengan 300 keV
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 Kev and 300 Kev
19
ISO/ASTM 51818:2002 Practice for dosimetry in an electron-beam facility for radiation processing at energies between 80 keV and 300 keV Translation SNI ISO/ASTM 51431:2010
IDT Praktik untuk dosimetri pada fasilitas iradiasi berkas elektron dan sinar-X (bremsstrahlung) untuk pengolahan makanan
Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
ISO/ASTM 51431:2005 Translation SNI ISO 6980-1:2014
IDT Energi nuklir - Radiasi partikel beta acuan - Bagian 1: Metode produksi (ISO 6980-1:2006, IDT)
Nuclear Energy - a reference beta particle radiation - Part 1: Method of production (ISO 6980-1: 2006, IDT)
ISO 6980-1:2006 IDT SNI ISO 6980-2:2014
Energi nuklir - Radiasi partikel beta acuan - Bagian 2 : Dasar-dasar kalibrasi terkait dengan besaran dasar yang mengkarakterisasi medan radiasi (ISO 6980-2:2004, IDT)
Nuclear Energy - a reference beta particle radiation - Part 2: The basics of calibration related to the basic quantities characterizing the radiation field (ISO 6980-2: 2004, IDT)
ISO 6980-2:2004 IDT SNI ISO/ASTM 51702:2008
Standar praktik untuk dosimetri dalam fasilitas iradiasi gamma untuk pemrosesan dengan radiasi
Practice for dosimetry in a gamma irradiation facility for radiation processing
24
ISO/ASTM 51702:2004 Practice for dosimetry in a gamma irradiation facility for radiation processing Translation SNI ISO/ASTM 52116:2014
IDT Dosimetri untuk iradiator gamma penyimpanan kering swa-kontener (SelfContained Dry-Storage) (ISO/ASTM 52116:2013, IDT)
Dosimetry for gamma irradiators self-dry storage containers (Self-Contained Dry-Storage) (ISO / ASTM 52 116: 2013, IDT)
ISO/ASTM 52116:2013 IDT SNI ISO/ASTM 51631:2014
Standar praktis untuk penggunaan sistem dosimetri kalorimetri untuk pengukuran dosis berkas elektron dan kalibrasi sistem dosimetri rutin (ISO/ASTM 51631:2013, IDT)
Practical standards for the use of dosimetry systems calorimetry for electron beam dose measurements and calibration routine dosimetry systems (ISO / ASTM 51 631: 2013, IDT)
ISO/ASTM 51631:2013 IDT SNI ISO/ASTM 51956:2011
Praktik penggunaan sistem dosimetri termoluminesen (TLD) untuk pemrosesan dengan radiasi
Practice for use of thermoluminescence dosimetry (TLD) systems for radiation processing
ISO/ASTM 51956:2005 Translation SNI ISO/ASTM 51702:2014
IDT Dosimetri dalam fasilitas gamma untuk pemrosesan dengan radiasi (ISO/ASTM 51702:2013, IDT)
Dosimetry in facilities for processing gamma radiation (ISO / ASTM 51 702: 2013, IDT)
ISO/ASTM 51702:2013 IDT SNI ISO/ASTM 52628:2015
Praktik standar untuk dosimetri dalam pemrosesan dengan radiasi (ISO/ASTM 52628:2013, IDT)
Standard practice for dosimetry in radiation processing (ISO / ASTM 52 628: 2013, IDT)
30
ISO/ASTM 52628:2013 IDT SNI ISO/ASTM 51818:2014
Dosimetri pada fasilitas berkas elektron untuk pemrosesan dengan radiasi pada energi antara 80 keV sampai dengan 300 keV (ISO/ASTM 51818:2013, IDT)
Dosimetry in the electron beam facility for radiation processing at energies between 80 keV to 300 keV (ISO / ASTM 51 818: 2013, IDT)
ISO/ASTM 51818:2013 SNI ISO/ASTM 51261:2014
IDT Kalibrasi sistem dosimetri rutin untuk pemrosesan dengan radiasi (ISO/ASTM 51261:2013, IDT)
Calibration routine dosimeter systems for radiation processing (ISO / ASTM 51 261: 2013, IDT)
ISO/ASTM 51261:2013 IDT SNI ISO/ASTM 51818:2012
Praktik dosimetri pada fasilitas berkas elektron untuk pemrosesan dengan radiasi pada energi antara 80 sampai dengan 300 keV
Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 keV and 300 keV
23
Practice standard dosimetry systems use termoluminisensi (TLD) for processing by radiation (ISO/ASTM 51956: 2013, IDT)
22
ISO/ASTM 51818 IDT SNI ISO/ASTM 51956:2015
Praktik standar penggunaan sistem dosimetri termoluminisensi (TLD) untuk pemrosesan dengan radiasi (ISO/ASTM 51956:2013, IDT)
ISO/ASTM 51956:2013 IDT
- 60 -
SNI ISO/ASTM 51607:2015
Praktik penggunaan sistem dosimetri alanin-EPR (ISO/ASTM 51607:2013, IDT)
Practice using alanine-EPR dosimeter systems (ISO/ASTM 51607: 2013, IDT)
20
Performance characterization guide dosimeters and dosimetry systems for use in the processing of the radiation (ISO/ASTM 52701: 2013, IDT)
26
Water quality - Radium-226 - Part 2: Test method using manometry (ISO 13165-2: 2014, IDT)
23
Practice using polymethylmethacrylate dosimetry systems (ISO/ASTM 51276: 2012, IDT)
18
Dosimetry lab in the facility X-ray (bremsstrahlung) for processing by radiation at an energy of 50 keV up to 7.5 MeV (ISO/ASTM 51608: 2015, IDT)
41
Standard practice the use of cellulose triacetate dosimetry system (ISO/ASTM 51650: 2013, IDT)
20
Standard practice for radiation dosimetry of blood (ISO/ASTM 51939: 2013, IDT)
29
Guide estimation of measurement uncertainty in dosimetry for processing with radias (ISO/ASTM 51707: 2015, IDT)
27
Practice using dichromate dosimetry system (ISO/ASTM 51401: 2013, IDT)
19
Guidance on the use of radiation-sensitive indicators (ISO/ASTM 51539: 2013, IDT)
12
Water quality - Radium-226 - Part 1: Test method using a liquid scintillation counter (ISO 13165-1: 2013, IDT)
23
Standard practice the use of the film dosimetry system radiokromik (ISO/ASTM 51275: 2013, IDT)
18
ISO/ASTM 51607:2013 IDT SNI ISO/ASTM 52701:2015
Panduan karakterisasi kinerja dosimeter dan system dosimetri untuk penggunaan dalam pemrosesan dengan radiasi (ISO/ASTM 52701:2013, IDT)
ISO/ASTM 52701:2013 IDT SNI ISO 13165-2:2015
Mutu air - Radium-226 - Bagian 2: Metode uji menggunakan emanometri (ISO 13165-2:2014, IDT)
ISO 13165-2:2014 IDT SNI ISO/ASTM 51276:2015
Praktik penggunaan sistem dosimetri polimetilmetakrilat (ISO/ASTM 51276:2012, IDT)
ISO/ASTM 51276:2012 IDT SNI ISO/ASTM 51608:2015
Praktik dosimetri dalam fasilitas sinar-X (bremsstrahlung) untuk pemrosesan dengan radiasi pada energi 50 keV sampai dengan 7,5 MeV (ISO/ASTM 51608:2015, IDT)
ISO/ASTM 51608:2015 IDT SNI ISO/ASTM 51650:2015
Praktik standar penggunaan sistem dosimetri selulosa triasetat (ISO/ASTM 51650:2013, IDT)
ISO/ASTM 51650:2013 IDT SNI ISO/ASTM 51939:2015
Praktik standar untuk dosimetri iradiasi darah (ISO/ASTM 51939:2013, IDT)
ISO/ASTM 51939:2013 IDT SNI ISO/ASTM 51707:2015
Panduan estimasi ketidakpastian pengukuran dalam dosimetri untuk pemrosesan dengan radias (ISO/ASTM 51707:2015, IDT)
ISO/ASTM 51707:2015 IDT SNI ISO/ASTM 51401:2015
Practice using polymethylmethacrylate dosimetry systems (ISO/ASTM 51276: 2012, IDT)
ISO/ASTM 51401:2013 IDT SNI ISO/ASTM 51539:2015
Panduan penggunaan indikator peka radiasi (ISO/ASTM 51539:2013, IDT)
ISO/ASTM 51539:2013 IDT SNI ISO 13165-1:2015
Mutu air - Radium-226 - Bagian 1: Metode uji menggunakan pencacah sintilasi cair (ISO 13165-1:2013, IDT)
ISO 13165-1:2013 IDT SNI ISO/ASTM 51275:2015
Praktik standar penggunaan sistem dosimetri film radiokromik (ISO/ASTM 51275:2013, IDT)
ISO/ASTM 51275:2013 IDT
- 61 -
19 19.020
TESTING
PENGUJIAN
Test conditions and procedures in general
Kondisi dan prosedur pengujian secara umum
SNI 19-3002-1992
Standar atmosfir untuk pengkondisian ruang dan atau pengujian
Standard atmosphere for room conditional and testing
2
SNI 19-6526-2001
Cara uji nisbah poisson pada suhu ruang
Test method for poisson's ratio at room temperature
9
ASTM E 132: 1986, Standard test methods for poisson's ratio at room temperature Translation
IDT
SNI 19-6045-1999
Suhu uji yang disarankan
Suggested test temperature
SNI 7986:2014
Penentuan kuantitas muatan kapal pada kegiatan transportasi mineral dan batubara
Determining the quantity of cargo ships on mineral and coal transportation activities
SNI ISO 554:2014
Atmosfer standar untuk pengondisian dan/atau pengujian - Spesifikasi (ISO 554 – 1976, IDT)
Standard atmospheres for conditioning and/or testing – Specifications
5 52 7
ISO 554 – 1976 IDT SNI 04-1994-1990
Cara pengambilan contoh benda uji
Sampling methods of test specimens
14
SNI 19-0429-1989
Petunjuk pengambilan contoh cairan dan semi padat
Guide for sampling of liquid and semi solid materials
10
SNI 19-0428-1998
Petunjuk pengambilan contoh padatan
Guide for sampling of solid materials
12
19.040
Environmental testing
Pengujian lingkungan
SNI 19-6964.7-2003
Kualitas air laut - Bagian 7: Cara uji nitrat (NO3-N) dengan reduksi kadmium secara spektrofotometri
Seawater quality - Part 7: Test methods of nitrates (NO3-N) with cadmium reduction by spectrophotometry
16
SNI 19-6964.6-2003
Kualitas air laut - Bagian 6: Cara uji total sianida (CN-) dengan 4-piridin asam karboksilat-pirazolon secara spektrofotometri
Seawater quality - Part 6: Test methods of cyanides (CN-) with 4-phyridine carboxylic acidpyrazolones by spectrophotometry
16
SNI 19-6964.5-2003
Kualitas air laut - Bagian 5: Cara uji sulfat (SO4=) dengan gravimetri
Seawater quality - Part 5: Test methods of sulphates (SO4=) by gravimetric analysis
12
SNI 04-4519.2-1998
Pengujian lingkungan - Bagian 2 : Pengujian - Uji kabut : Kabut garam
Environmental tests - Part 2 : Tests : Salt mist
6
SNI 04-6208.2.3-2000
Prosedur dasar pengujian lingkungan - Bagian 2: Pengujian - Uji Ec: Jatuh dan guling, terutama untuk benda uji jenis peralatan
Basic environmental testing procedures - Part 2: Tests - Test Ec: Drop and topple, primarily for equipment - Type speciment
7
IEC 60068-2-31 : 1969, Basic environmental testing procedures- Part 2 : Tests - Test Ec : Drop and topple, primarily for equipment-type speciment Translation SNI 04-6208.2.2-2000
IDT Prosedur dasar pengujian lingkungan - Bagian 2-2 : Pengujian - Uji Db dan petunjuk panas lembab, siklus (siklus12+12 jam)
Basic enviromental testing procedures - Part 2-2: Tests - Db test and guidance of bump heat, cyclic (12+12 hour cycle)
10
IEC 60068-2-30: 1980, Basic environmental testing procedures - Part 2 : Tests - Test Db and guidance: Bump heat, cyclic (12 A 12 hour cycle) Translation SNI 04-6208.2.27-2000
MOD Prosedur dasar pengujian lingkungan - Bagian 2-27: Pengujian - Uji Ea dan pedoman: Kejut
Environmental testing procedurs - Part 2-27: Tests - Test Ea and guidance: Shock
32
Basic environmental testing procedures - Part 2-1: Tests - Eb test and guidance: Bump
17
IEC 60068-2-27: 1987, Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock Translation SNI 04-6208.2.1-2000
IDT Prosedur dasar pengujian lingkungan - Bagian 2-1: Pengujian - Uji Eb dan petunjuk: Benturan
IEC 60068-2-29 : 1987, Basic environmental testing procedures- Part 2 : Tests - Test Eb and Guidance : Bump Translation
IDT
SNI 19-6964.1-2003
Kualitas air laut - Bagian 1: Cara uji nitrit (NO2-N) dengan sulfanilamid secara spektrofotometri
Seawater quality - Part 1: Test methods of nitrites (NO2-N) with sulfanilamides by spectrofotometry
15
SNI 19-6964.2-2003
Kualitas air laut - Bagian 2: Cara uji merkuri (Hg) secara cold vapour dengan spektrofotometer serapan atom (SSA) atau mercury analyzers
Seawater quality - Part 2: Test methods of mercury (Hg) with cold vapour by atomic absorption spectrophotometers (AAS) or mercury analyzers
14
SNI 19-6964.4-2003
Kualitas air laut - Bagian 4: Cara uji sulfida (S=) dengan biru metilen secara spektrofotometri
Seawater quality - Part 1: Test methods of sulphides (S=) with methylene blue by spectrophotometry
15
SNI 19-6964.3-2003
Kualitas air laut - Bagian 3: Cara uji amonia (NH3-N) dengan biru indofenol secara spektrofotometri
Seawater quality - Part 3: Test methods of ammonia solution (NH3-N) with indophenol blue by spectrophotometry
14
SNI 7745:2012
Tata cara penghitungan evapotranspirasi tanaman acuan dengan metode Penman-Monteith
The procedure for calculating reference crop evapotranspiration by Penman-Monteith method
SNI 19-1498-1989
Alat Uji kontinyu NO dan NO2 dalam gas buang
Continuous NO and NO2 test apparatus in exhaust-gases
19.060
23
Mechanical testing
Pengujian mekanika
SNI 134 000-1995
Bekerja di jalur operasi grader
Working on the grader operation tracks
SNI 19-3623-1994
Analisis statistik data lelah dari tegangan - umur (S-N) dan regangan umur (E-N) linear atau dilinearkan
Fatique data statistical analysis of aging stresses (S-N) and aging strain (E-N) linear or to be lineared
SNI 19-3314-1994
Cara uji mampu tarik dalam Erickson
Method of Erikson cupping test
SNI 19-3315-1994
Cara uji mampu tarik dalam dengan bentuk mangkuk kerucut
Method of conical cup test
SNI 19-4004-1996
Verifikasi mesin uji tarik statis satu sumbu
Verification of static uniaxial testing machines
SNI 05-3383-1994
Verifikasi beban dinamis amplitudo konstan pada mesin uji lelah beban aksial
Verification of constant amplitude dynamic loads on axial fatique testing machine
9
SNI 07-6733-2002
Cara uji penentuan modulus elastisitas, modulus tangen, dan modulus chord
Test methods for elasticity of modulus, tangen of modulus, and chord of modulus
14
4
24 3 4 10
ASTM E 111 - 82 Standard test method for young's modulus, tangent modulus and chord modulus Translation
MOD
SNI 05-1866-1990
Spesifikasi balok standar V2 dan rekomendasi cara penggunaannya dengan alat ultrasonik
Spesification of V2 standard blocks and recomendation of application by ultrasonic equipment
SNI 07-6731-2002
Metode perhitungan siklus pada analisis lelah
Methods for fatigue analysis counting cycle
3 18
ASTM E 1049-85 Standard practices for cycle counting in fatigue analysis IDT
19.080
Electrical and electronic test and measuring equip
Pengujian listrik dan elektronik
SNI 04-3874-1995
Perlengkapan uji meter energi listrik
Testing equipment of electric energy meters
- 62 -
17
SNI IEC 60270:2010
Teknik - Pengujian Tegangan Tinggi - Pengukuran luahan parsial
High-voltage test techniques - Partial discharge measurements
IEC 60270 ED 3.0 (2000-12) Translation SNI IEC 60664-1:2011
IDT Koordinasi insulasi untuk perlengkapan pada sistem tegangan rendah – Bagian 1: Prinsip, persyaratan dan pengujian
Insulation coordination for equipment within low-voltage systems – Part 1 : Principles, requirements and tests
IEC 60664-1 Ed. 2.0 (2007-04) Insulation coordination for equipment within low-voltage systems – Part 1 : Principles, requirements and tests Translation SNI ISO 9915:2012
IDT Coran paduan aluminium - Uji radiografi
Aluminum alloy castings - Radiographic Testing
ISO 9915:1992, IDT IDT SNI IEC 60060-2:2011
Teknik pengujian tegangan tinggi - Bagian 2 : Sistem pengukuran
High voltage test techniques – Part 2: Measuring systems
IEC 60060-2 (1994-11) High voltage test techniques – Part 2: Measuring systems Translation SNI IEC 60052:2011
IDT Pengukuran tegangan dengan sarana sela udara standar
Voltage measurement by means standard air gaps
IEC 60052 ed 3.0 (2002-10) Voltage measurement by means standard air gaps Translation SNI ISO 4986:2012
IDT Coran baja - Inspeksi partikel magnetik
Steel castings - Magnetic particle inspection
ISO 4986:2010, IDT IDT SNI IEC 61010-1:2016
Persyaratan keselamatan perlengkapan listrik untuk penggunaan pengukuran, kontrol dan laboratorium - Bagian 1: Persyaratan umum (IEC 61010-1:2010, IDT)
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (IEC 61010-1:2010, IDT)
167
IEC 61010-1:2010 IDT
19.100
Non-destructive testing
Pengujian tanpa merusak
SNI 18-6930-2002
Uji tak rusak - Radiologi sinar-X dan sinar - Y bidang industri perbendaharaan kata
Non-destructive testing - Indusrial X- rays and Y-rays radiography - Vocabulary
20
Non-destructive testing radiograpic examination of metallic materials by X-rays and Yrays - Basic rules
25
ISO 5576-1997 Non-destructive testing industrial X-ray and gamma-ray - Vocabulary Translation SNI 18-6931-2002
IDT Uji tak rusak - Pengujian radiografi bahan logam dengan sinar- X dan Y Aturan dasar
ISO 5579-1998 Non-destructive testing - Radiographic examination of metallic by X- and Y-rays - Basic rules Translation SNI 18-6932-2002
IDT Uji tak rusak - Persyaratan minimum iluminator radiografi industri
Non-destructive tests - Industrial radiographic illuminator minimum requirements
7
ISO 5580-1985 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements Translation SNI ISO/TS 18173:2010
IDT Uji tak rusak - Istilah umum dan definisi
Non-destructive testing - General terms and definitions
ISO/TS 18173:2005 Non-destructive testing - General terms and definitions Translation SNI ISO 9712:2014
IDT Uji tak rusak - Kualifikasi dan sertifikasi personel UTR (ISO 9712:2012, IDT)
Nondestructive testing - Qualification and certification of NDT personnel (ISO 9712: 2012, IDT)
ISO 9712:2012 IDT SNI ISO 19232-4:2010
Uji tak rusak - Kualitas citra radiograf - Bagian 4: Evaluasi eksperimental nilai kualitas citra dan tabel kualitas citra
Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
ISO 19232-4:2004 Translation SNI ISO 19232-1:2010
IDT Uji tak rusak - Kualitas citra radiograf - Bagian 1: Indikator kualitas citra (tipe kawat) - Penentuan nilai kualitas citra
Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
ISO 19232-1:2004 Translation SNI ISO 19232-5:2010
IDT Uji tak rusak - Kualitas citra radiograf - Bagian 5: Indikator kualitas citra (tipe kawat dupleks) - Penentuan nilai kualitas ketidaktajaman citra
Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type) - Determination of image unsharpness value
ISO 19232-5:2004 Translation SNI ISO 19232-1:2014
IDT Uji tak rusak - Kualitas bayangan radiograf - Bagian 1: Penentuan nilai kualitas bayangan menggunakan indikator kualitas bayangan tipe-kawat (ISO 19232-1:2013, IDT)
Nondestructive testing - Radiographic image quality - Part 1: Determination of the value of quality shadow using shadow quality indicators of type-wire (ISO 19232-1: 2013, IDT)
IDT Uji tak rusak - Kualitas bayangan radiograf - Bagian 2: Penentuan nilai kualitas bayangan menggunakan indikator kualitas bayangan jenis step/hole (ISO 19232-2:2013, IDT)
Nondestructive testing - Radiographic image quality - Part 2: Determination of image quality value using quality indicators shadow kind of step / hole (ISO 19232-2: 2013, IDT)
ISO 19232-1:2013 SNI ISO 19232-2:2014
ISO 19232-2:2013 IDT SNI 18-6933.1-2002
Uji tak rusak - Film radiografi untuk industri - Bagian 1: Klasifikasi sistem film radiografi industri
Non-destructive testing - Industrial radiographic film - Part 1: Classification of system for industrial radiographic film
ISO 11699-1-1998 Non-destructive testing - Industrial radiographic films - Part 2 : Control of film processing by means of reference values Translation SNI ISO 3999:2008
IDT Proteksi radiasi - Peralatan untuk radiografi gamma industri - Spesifikasi unjuk kerja, desain dan uji
Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance, design and tests (ISO 3999:1999, IDT
ISO 3999:1999 Radiation protection -- Apparatus for industrial gamma radiography -- Specifications for performance, design and tests (Document available as of: 2004-12-08 ) Translation SNI ISO 9712:2008
IDT Uji tak rusak - Kualifikasi dan sertifikasi personel
Non-destructive testing - Qualification and certification of personnel
ISO 9712:2005 Non-destructive testing -- Qualification and certification of personnel Translation SNI ISO 19232-2:2010
IDT Uji tak rusak - Kualitas citra radiograf - Bagian 2: Indikator kualitas citra (tipe undak/lubang) - Penentuan kualitas citra
ISO 19232-2:2004 Translation
IDT
- 63 -
Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
9
SNI ISO 16810:2014
Uji tak rusak - Uji ultrasonik - Prinsip umum (ISO 16810:2012, IDT)
Nondestructive testing - Ultrasonic testing - General principles (ISO 16810: 2012, IDT)
ISO 16810:2012 IDT SNI ISO 3452-1:2014
Uji tak rusak - Uji penetran - Bagian 1: Prinsip umum (ISO 3452-1:2013, IDT)
Nondestructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1: 2013, IDT)
ISO 3452-1:2013 IDT SNI ISO 16823:2014
Uji tak rusak - Uji ultrasonik - Teknik transmisi (ISO 16823:2012, IDT)
Nondestructive testing - Ultrasonic testing - Techniques transmission (ISO 16823: 2012, IDT)
ISO 16823:2012 IDT SNI ISO/TR 25108:2010
Uji tak rusak - Pedoman untuk lembaga pelatihan personel uji tak rusak
Non-destructive testing - Guidelines for NDT personnel training organizations
ISO/TR 25108:2006 Non-destructive testing -- Guidelines for NDT personnel training organizations Translation SNI ISO 19232-3:2010
IDT Uji tak rusak - Kualitas citra radiograf - Bagian 3: kualifikasi kualitas citra untuk logam
Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals
ISO 19232-3:2004 Translation SNI ISO 16826:2014
IDT Uji tak rusak - Uji ultrasonik - Pemeriksaan untuk diskontinuitas tegak lurus terhadap permukaan (ISO 16826:2012, IDT)
Nondestructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826: 2012, IDT)
ISO 16826:2012 IDT SNI ISO 16831:2014
Uji tak rusak - Uji ultrasonik - Karakterisasi dan verifikasi peralatan ultrasonik pengukur ketebalan (ISO 16831:2012, IDT)
Nondestructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness gauge equipment (ISO 16831: 2012, IDT)
ISO 16831:2012 IDT SNI ISO 19232-5:2014
Uji tak rusak - Kualitas bayangan radiograf - Bagian 5: Penentuan nilai ketidaktajaman bayangan menggunakan indikator kualitas bayangan tipe kawat dupleks (ISO 19232-5:2013, IDT)
Nondestructive testing - Radiographic image quality - Part 5: Determination of the value ketidaktajaman shadows using shadow quality indicators duplex wire type (ISO 19232-5: 2013, IDT)
ISO 19232-5:2013 IDT SNI ISO/TR 25107:2011
Uji Tak Rusak - Pedoman untuk silabus pelatihan uji tak rusak
Non-destructive testing - Guidelines for NDT training syllabuses
ISO/TR 25107:2006 Translation SNI ISO 19232-4:2014
IDT Uji tak rusak - Kualitas bayangan radiograf - Bagian 4: Evaluasi eksperimental nilai kualitas bayangan dan tabel kualitas bayangan (ISO 19232-4:2013, IDT)
Nondestructive testing - Radiographic image quality - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4: 2013, IDT)
ISO 19232-4:2013 IDT SNI ISO 19232-3:2014
Uji tak rusak - Kualitas bayangan radiograf - Bagian 3: Kelas kualitas bayangan (ISO 19232-3:2013, IDT)
Nondestructive testing - Radiographic image quality - Part 3: Class image quality (ISO 19232-3: 2013, IDT)
ISO 19232-3:2013 IDT SNI ISO 16526-1:2013
Uji tak rusak - Pengukuran dan evaluasi tegangan tabung sinar - X - Bagian 1: Metode pembagi tegangan
Nondestructive testing - Measurement and evaluation of ray tube voltage - X - Part 1: Method of voltage divider
ISO 16526-1:2011 Translation SNI ISO 9934-3:2012
IDT Uji tak rusak - Uji partikel magnetik - Bagian 3: Peralatan
Non-destructive testing - Magnetic particle testing - Part 3: Equipment
ISO 9934-3:2002 IDT SNI ISO/TS 11774:2013
IDT Uji tak rusak - Kualifikasi berbasis kinerja
Nondestructive testing - Qualification based performance
ISO 11774:2011 Translation SNI ISO 16526-3:2013
IDT Uji tak rusak - Pengukuran dan evaluasi tegangan tabung sinar - X - Bagian 3: Metode spektrometri
Nondestructive testing - Measurement and evaluation of ray tube voltage - X - Part 3: Spectrometry method
ISO 16526-3:2011 Translation SNI ISO 17635:2012
IDT Uji tak rusak pada lasan - Aturan umum untuk bahan logam
Non-destructive testing of welds - General rules for metallic materials
ISO 17635:2010 IDT SNI ISO 9934-2:2012
IDT Uji tak rusak - Uji partikel magnetik - Bagian 2: Media deteksi
Non-destructive testing - Magnetic particle testing - Part 2: Detection media
ISO 9934-2:2002 IDT SNI ISO 9934-1:2012
IDT Uji tak rusak - Uji partikel magnetik - Bagian 1: Prinsip umum
Non-destructive testing - Magnetic particle testing - Part 1: General principles
ISO 9934-1:2001 IDT SNI ISO 16526-2:2013
IDT Uji tak rusak - Pengukuran dan evaluasi tegangan tabung sinar - X - Bagian 2: Pemeriksaan kekonstanan dengan metode filter tebal
Nondestructive testing - Measurement and evaluation of ray tube voltage - X - Part 2: Examination of constancy with thick filter method
ISO 16526-2:2011 Translation
IDT
SNI 19-1058-1989
Tata nama pengujian ultrasonik
Ultrasonic test nomenclature
8
SNI 19-1863-1990
Cara uji ultrasonik menggunakan prob sudut dengan metode kontak langsung
Ultrasonic testing method with retangular probe using direct contact method
6
SNI 19-1862-1990
Cara uji ultrasonik menggunakan probe normal dengan metode kontak langsung
Ultrasonic testing method with normal probe using direct contact method
6
SNI 05-1153-1989
Spesifikasi balok standar V1 dan rekomendasi cara penggunaannya dengan alat ultrasonik
Specification of V1 standard blocks and recomendation for application by ultrasonic equipment
9
SNI 19-6869-2002
Metode pengambilan contoh uji, bentuk, ukuran dan klasifikasi
Sampling methods shape, size and classification
SNI 19-1152-1989
Peralatan dan perlengkapan pesawat ultrasonik pulsa gema sekan A
Tools and accessories of the ultrasonic A echopulses equipment
- 64 -
16 6
19.120
Particle size analysis. Sieving
Analisis ukuran partikel Pengayakan
SNI 07-6866-2002
Spesifikasi saringan anyaman kawat untuk keperluan pengujian
Specification for wire-cloth sieves for testing purposes
- 65 -
10
21
MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE
SISTEM MEKANIKA DAN KOMPONEN UNTUK PENGGUNAAN UMUM
21.020
Characteristics and design of machines, apparatus,
Karakteristik dan desain mesin, aparat, peralatan
SNI 04-4520-1998
Program peningkatan keandalan
Programmes for reliability growth
28
SNI 04-6536-2001
Aplikasi teknik Markov
Application of Markov techniques
27
IEC 1165: 1995, Application of Markov techniques Translation
IDT
SNI 7726:2012
Mesin pengurai sabut kelapa - Syarat mutu dan metode uji
Decomposing coconut coir machine - Quality requirements and test methods
SNI 7727:2012
Pompa setrifugal - Ujung hisap - Syarat mutu dan metode uji
Setrifugal pumps - suction tip - Quality requirements and test methods
SNI 7765:2012
Mesin pencuci kulit biji kopi proses basah - Tipe silinder horisontal sistem kontinyu - Syarat mutu
Skin washing machine wet process coffee beans - horizontal cylinder type continuous systems - Quality requirements
SNI 04-1931-1990
Rencana dan prosedur pengambilan contoh untuk inspeksi barang
Planning and procedure for sampling to inspection of goods
21.040
Screw threads
Ulir sekerup
21.040.01
Ulir sekerup secara umum
SNI 05-6703-2002
21.040.10
71
Screw threads in general
Kunci baut lubang segi enam
Hexagon socket screw keys
Ulir sekerup metrik
7
Metric screw threads
SNI 05-2933-1992
Ulir metrik halus. Batas ukuran dan toleransi
Metric fine screw threads, Limits of sizes and tolerances
SNI 05-2934-1992
Ulir metrik kasar. Batas ukuran dan toleransi
Metric coarse screw threads. Limits of sizes and tolerances
SNI 05-3227-1992
Ulir sekrup metris kegunaan umum. Gauging (Pelaksanaan pengukuran)
General purpose screw threads. Gauging
SNI 05-2924-1992
Ulir sekrup metrik untuk keperluan umum - Ukuran terpilih untuk sekrup, baut dan mur
General purpose metric screw threads - Selected size for screws, bolts and nuts
SNI 05-2062-1990
Ulir sekrup trapesium metrik. Bentuk dasar dan bentuk bahan maksimum
Metric trapezoidal screw threads. Basic profile and maximum material profiles
SNI 05-2389-1991
Ulir sekrup metrik kegunaan umum - Bentuk dasar
General purpose metric screw threads - Basic profile
SNI 05-2063-1990
Ulir sekrup trapesium metrik. Dimensi dasar
Metric trapezoidal screw threads. Basic dimensions
8
SNI 05-2392-1991
Ulir sekrup metrik - Dimensi dasar
Metric screw threads - Basic dimensions
5
21.040.20
Ulir sekerup inci
SNI 05-0785-1989
21.040.30
Ulir Withworth kasar untuk keperluan umum. Profil dasar
General purpose whitworth coarse screw threads. Basic profile
Ulir sekerup khusus
5 15
4
Special screw threads
Ulir sekrup unified kasar. Batas ukuran dan toleransi
Unified coarse screw threads. Limit of sizes and tolerances
SNI 05-2390-1991
Ulir sekrup miniatur
Miniatur screw threads
15
Fasteners
Pengencang
SNI 05-6024-1999
Ragum mesin
Machine vices
SNI 3690:2011
Kunci baut kepala lubang segi-enam
Assembly tools for screws and nut hexagon socket screw keys
21.060.01
2
Inch screw threads
SNI 05-2935-1992
21.060
48
Pengencang secara umum
11
Fasteners in general
SNI 05-2248-1991
Persyaratan umum untuk baut, sekrup, baut tanam dan mur
Bolts, screws, studs, and nuts, General requirement
3
SNI 05-2241-1991
Sistem penunjukan fastener
Designation system of fasteners
2
SNI 05-3226-1992
Pengikat berulir. Pengujian kelelahan beban aksial. Cara pengujian
Threaded fasteners. Axial load fatique testing, Test methods
SNI 05-1598-1989
Pengencang - Baut, sekrup, baut tanam dan mur - Lambang dan penandaan ukuran
Fasteners - Bolts, screws, studs and nuts - Symbols and designation of dimensions
9
SNI 05-1597-1989
Panjang ulir tak sempurna pada ulir pengencang dengan ulir metrik serba guna
Thread run-out for fasteners with general purpose metric threads
2
21.060.10
Baut sekerup baut tap
10
Bolts, screws, studs
SNI 05-3222-1992
Baud dan mur segi enam seri metris. Toleransi jarak dua sisi yang sejajar dan jarak dua sudut menyudut
Hexagon bolts and nuts metric series. Space tolerances between two sides and two angles
2
SNI 05-3064-1992
Baut kepala segi enam - Kelas C
Hexagon head bolts - Product grade C
7
SNI 05-2242-1991
Sekrup mesin tipe silang kepala pan, Kelas A
Cross recessed pan head screws, Grade A
5
SNI 05-2216-1991
Sekrup mesin alur kepala cheese, Kelas A
Slotted cheese head screws, Grade A
4
SNI 05-2243-1991
Sekrup mesin tipe silang kepala benam rata, Kelas A hanya untuk tingkat 4
Cross recessed countersunk flat head screws, Grade A and property class 4.8 only
5
SNI 05-3311-1994
Baut pengikat dai press
Shoulder serew stamping dies
9
SNI 05-2215-1991
Sekrup mesin alur kepala pan kelas - A
Slotted pan head screws, Grade - A
SNI 05-3067-1992
Baut kepala segi enam dengan ulir metrik halus - Kelas A danB
Hexagon head bolts with metric fine pitch thread - Product grade A and B
SNI 05-2217-1991
Sekrup mesin alur kepala benam timbul kelas A
Slotted raised countersunk head screws, Grade A
4
SNI 05-2244-1991
Sekrup mesin tipe silang kepala benam timbul, Kelas A
Crossed recessed raised countersunk head screws, Grade A
4
SNI 05-2245-1991
Sekrup pengetap tipe silang kepala pan
Crossed recessed pan head tapping screws
5
SNI 05-2218-1991
Sekrup mesin alur kepala benam rata, Kelas A
Slotted flat countersunk head screws, Grade A
4
SNI 05-2213-1991
Sekrup pengetap alur kepala benam rata
Slotted countersunk flat head tapping screws
4
SNI 05-2214-1991
Sekrup pengetap alur kepala benam timbul
Slotted raised countersunk (oval) head tapping screws
4
SNI 05-3066-1992
Sekrup kepala segi enam dengan ulir metrik halus kelas A danB
Hexagon head screws with metric fine pitch thread - Product grade A and B
12
SNI 05-3065-1992
Baut kepala segi enam untuk konstruksi dengan kekuatan tinggi, mempunyai ukuran lebar kunci besar dan panjang ulir metrik nominal - Kelas C untuk tingkat 8.8 dan 10.9
Hexagon bolt for high-strength structural bolting with large width and nominal metric thread length - Product grade C - Property classes 8.8 and 10.9
12
SNI 05-2247-1991
Sekrup pengetap tipe silang kepala benam timbul
Cross recessed raised countersunk head tapping screws
SNI 05-3214-1992
Sifat-sifat mekanis pengikat. Baut, sekrup dan stud
Mechanical properties of fasteners. Bolts, screws and stud
- 66 -
4 11
6 27
SNI 05-2061-1990
Pengencang - Lubang longgar untuk baut dan sekrup
Fasteners - Clearance holes for bolts and screws
3
SNI 05-3063-1992
Baut kepala segi enam - Kelas B dengan diameter batang sama dengan diameter pits
Hexagon head bolts - Product grade B, with shank diameter = pitch diameter
7
SNI 05-2246-1991
Sekrup pengetap tipe silang kepala benam rata
Cross recessed countersunk head tapping screws
5
SNI 05-2212-1991
Sekrup pengetap alur kepala pan
Slotted pan head tapping screws
4
SNI 05-1887-1990
Radius hasil kerja pres pada pelat untuk suku bagian mesin
Press machines performance radius on the plastic for machines spare parts
8
SNI 05-6165-1999
Baut tanam untuk digunakan dengan Mur-T
Studs for use with T-nuts
4
SNI 05-6164-1999
Baut pengikat berulir sama pada kedua ujungnya
Double end studs
SNI 0661:2008
Baut dan mur segi-enam untuk penggunaan umum
Hexagon head bolts for general usages
37
SNI ASTM A325M:2012
Spesifikasi baut baja hasil perlakuan panas dengan kuat tarik minimum 830 Mpa
Structual bolts, Steel, Heat Treated 830 MPa minimum tensile strength (metric) (ASTM A325M-04, IDT)
21
5
ASTM A325M IDT SNI 05-1602-1989
Sekrup kepala benam, Bentuk dan kaliber kepala
Countersunk head screws, Head configuration and gauging
SNI 05-1604-1992
Sekrup kepala segi enam, kualitas produk C
Hexagon head screws, product grade C
10
SNI 05-0571-1989
Cara uji mekanis mur dan baud
Nuts and bolts, Mechanical test method
17
SNI 05-1603-1992
Sekrup kepala segi enam, Kualitas produk A dan B
Hexagon head screws, Product grade A and B
8
SNI 05-1204-1989
Ukuran alur T dan baut meja mesin perkakas
Sizes of T groove and bolts of table of machine tools
3
SNI 05-1040-1989
Bentuk dan ukuran ujung baut
Shapes and dimensions of bolts
4
SNI 05-1785-1990
Diameter lubang baud dan dudukan kepala baud
Holes diameter of bolts and counterbones
4
SNI 05-1587-1989
Baut, sekrup, dan baut tanam serba guna - Panjang nominal dan panjang ulir
General purpose screws bolts and studs, Nominal length and thread length
2
SNI 05-1586-1989
Baut dan sekrup serba guna - Radius pada dasar kepala
General purpose bolts and screws, Radii under the head
SNI 05-0538-1989
Sekrup kayu dengan alur garis untuk obeng
Screws for wood with straight grooved for screwdrivers
SNI 05-1041-1989
Sifat mekanis baut baja
Mechanical properties of steel bolts
SNI 05-0787-1989
Baud, mur dan sekerup, Tata nama perkakas pemasang
Bolts, nuts and screws, Nomenclature
21.060.20
Mur
4
1 17 8 15
Nuts
SNI 05-3069-1992
Mur segi enam bentuk 2 - Kelas A dan B
Hexagon nuts style 2 - Product grade A and B
5
SNI 05-3068-1992
Mur segi enam bentuk 1 - Kelas A dan B
Hexagon nuts, style 1 - Product grade A and B
5
SNI 05-3070-1992
Mur segi enam - Kelas C
Hexagon nuts - Product grade C
5
SNI 05-3221-1992
Mur mahkota dan mur benteng yang berulir metris dengan diameter ulir 42 sampai dengan 100 mm
Metric threaded crown nuts and slotted nuts, thread diameter 42 to 100 mm
1
SNI 05-3062-1992
Metode pengujian mur ulir metrik halus dan kasar dengan nilai beban uji tertentu mekanis
Mechanical test fine and rough nuts with specific test load value
3
SNI 05-3219-1992
Mur baja pengunci segi enam tahan torsi. Dimensi seri inci
Prevailing torque type steel hexagon locknut, Inches series dimensions
2
SNI 05-3218-1992
Mur baja pengunci segi enam tahan torsi. Dimensi seri metris
Prevailing torque type steel hexagon locknuts. Metric series dimensions
SNI 05-3217-1992
Mur baja pengunci segi enam tahan torsi. Sifat-sifat mekanis dan kemampuannya
Prevailing torque type steel hexagon locknuts. Mechanical and performance properties
17
SNI 05-3216-1992
Sifat-sifat mekanis dari pengikat. Mur dengan harga spesifikasi beban yang diizinkan, tinggi efektif ulir 0,4 d sampai dengan 0,6 d
Mechanical properties of fastener, Nuts with specified proof load values, thread effective height 0,4 d to 0,6 d
11
SNI 05-3215-1992
Sifat-sifat mekanis dari pengikat. Mur dengan harga spesifikasi beban yang diizinkan
Mechanical properties of fasteners. Nuts with specified proof load values
10
SNI 05-4058-1996
Mur segi enam untuk perkakas tuntun dan pegang
Hexagon nuts for jig and fixture
3
SNI 05-3220-1992
Mur mahkota dan mur yang berulir metris
Castle nuts (crown nuts) and metric threaded nuts
1
SNI 05-6022-1999
Mur alur-T
T-slot nuts
4
SNI 05-1042-1989
Sifat mekanis mur baja
Mechanical properties of steel nuts
2
SNI 10-1091-1989
Mur kupu-kupu
Butterfly nuts
4
21.060.40
Paku keling
Rivets
SNI 07-1803-1990
Paku keling aluminium dan paduan aluminium
Aluminium and aluminium alloys rivets
SNI 03-0357-1989
Paku keling baja kepala panas
Hot steel rivets
21.060.50
2
Pin, paku
22 7
Pins, nails
SNI 05-2921-1992
Pasak tangensial dan alurnya
Tangential pins and its threads
5
SNI 05-2922-1992
Pasak tirus dengan atau tanpa kepala dan alurnya
Taper pins with or without head and its threads
6
SNI 0323:2014
Paku baja
Steel nails
SNI 05-0323-1999
Paku
Nails
13
SNI 03-6840-2002
Metode pengujian kuat cabut paku di laboratorium
Test methods for withdrawl of nail in the laboratory
11
21.060.70
Sekerup jepitan dan stapel
SNI 05-4057-1996
21.080
Clamps and staples
Klem untuk perkakas tuntun dan pegang
Clamps for jig and fixture
9
Hinges, eyelets and other articulated joints
Engsel, lubang tali dan sambungan lainnya
SNI 05-4100-1996
Bola penghubung
Ball joints
9
SNI 03-0092-1987
Engsel baja
Steel hinges
4
21.100 21.100.10
Bearings
Bantalan Bantalan datar
SNI 07-7177-2006
Plain bearings
Pendukung datar - Uji kekerasan logam pendukung - Bagian 1: Bahan campuran
Plain bearings - Hardness tests of bearing metals - Part 1: Mixed materials
- 67 -
7
21.100.20
Bantalan gelinding
Rolling bearings
SNI 05-1463-1989
Bantalan gelinding yang berbentuk rol
Rolling bearings
14
SNI 05-1462-1989
Rumah bantalan gelinding
Rolling bearings housing
19
SNI 05-1460-1989
Penomoran dan penandaan rakitan rumah bantalan gelinding
Numbering and marking for the assembling of rolling bearing housing
17
SNI 05-1199-1989
Klasifikasi dan cara penomoran bantalan gelinding
Classification and designation of rolling bearing
20
SNI 05-1200-1989
Dimensi batas dan toleransi bantalan gelinding
Boundary dimensions and tolerances of rolling bearings
29
SNI 05-1201-1989
Bantalan gelinding jenis bola, Bagian dan mutu bahan
Ball bearings for rolling bearing, Parts and materials specifications
SNI 05-0181-1987
Bantalan bola alur dalam
Deep groove ball bearings
SNI 05-1198-1989
Bantalan gelinding, Cara uji
Rolling bearings, Test method.
21.120
9 57
Shafts and couplings
Poros dan kopling
21.120.10
7
Poros
Shafts
SNI 05-2919-1992
Ujung poros silindris dan konis ukuran 1/10
1/10 cylindrical and conical shaft ends
13
SNI 05-1356-1989
Ujung poros
Point of shafts
16
SNI 05-1491-1989
Tinggi poros mesin penggerak dan yang digerakkan
Shaft heights for driving and driven machines
21.120.20
Kopling
SNI 05-7025-2004
21.120.40
4
Couplings Kran penyambung aliran bahan bakar (quick coupling)
Fuel connector faucet (quick coupling)
Pembalans dan mesin pembalans
32
Balancing and balancing machines
SNI 05-2300-1991
Mesin pembalans - Selubung dan kondisi pengaman lain
Balancing machines - Enclosures and safety measures
13
SNI 05-3049-1992
Balans rotor fleksibel, Kriteria evaluasi
Flexible rotor balance, Criteria for evaluating
12
21.140
Seals, glands
Segel, gelang penekan
SNI 05-4079-1996
Cara uji gasket asbes pampatan
Test method for compressed asbestos gaskets
SNI 05-3282-1994
Peralatan penyekat (Sil) - Cincin O, Bagian 3 : Kriteria mutu
Sealing devices - O ring - Part 3: Quality acceptance criteria
7
SNI 05-3281-1994
Peralatan penyekat (Sil) - Cincin O, Bagian 1: Diameter dalam, penampang, toleransi dan kode identifikasi ukuran
Sealing devices - O ring - Part 1 : Inside diameter, cross section, tolerances, size identification code
3
21.160
Springs
Pegas
SNI 05-2671-1992
Pegas ulir tekan pres dai
Coiled helical springs for stamping dies
SNI 09-0426-1989
Pegas daun kendaraan bermotor, Mutu
Leaf springs for motor vehicles, Specification
21.180
21
36 8
Housings, enclosures, other machine parts
Rumah, selungkup dan suku cadang mesin lainnya
SNI 05-6303-2000
Roda pemutar
Hand wheels
17
SNI 05-6304-2000
Tuas pemutar
Handle attachment
10
SNI 05-0541-1992
Mur dan baud kepala segi enam untuk konstruksi umum dan jembatan
Hexagon nuts and bolts for general and bridge construction
12
21.200
Gears
Roda gigi
SNI 10-4919-1998
Roda gigi kerucut untuk marin
Marine bevel gears
SNI 05-1364-1989
Roda gigi lurus yang umum dipakai pada konstruksi permesinan, Bentuk umum dan ukuran
Spur gears for general engineering, Shapes and dimensions
39
SNI 05-1365-1989
Roda gigi miring (Helical) yang umum dipakai pada konstruksi permesinan, Bentuk dan ukuran
Helical gears for general engineering, Shapes and dimension
23
21.220
Flexible drives and transmissions
Penggerak fleksibel dan trasmisi
21.220.10
4
Penggerak sabuk dan komponennya
Belt drives and their components
SNI 05-2211-1991
Mahkota puli untuk sabuk transmisi rata
Pulley crowns for flat transmission belts
2
SNI 05-2270-1991
Sabuk sinkron, Perhitungan daya dan jarak pusat penggerak
Synchronous belts, Calculation of power rating and drive centre distance
5
SNI 05-2205-1991
Puli transmisi, Kualitas pengerjaan akhir dan keseimbangan
Transmissian pulleys, Quality finish and balance
3
SNI 05-2259-1991
Sabuk transmisi datar, Panjang
Flat transmision belts, Length
1
SNI 05-2206-1991
Lebar dan panjang sabuk berjalan
Width and length of conveyor belt
2
SNI 05-2208-1991
Sabuk transmisi rata dan puli, Lebar
Flat transmission belts and corresponding pulleys, Width
1
SNI 05-2207-1991
Puli untuk sabuk transmisi rata, Diameter
Pulleys for flat transmission belt, Diameters
3
SNI 05-2260-1991
Sabuk berjalan, Rumus perhitungan jarak transmisi dengan tiga rol penghantar yang sama panjang
Conveyor belts, Formula for transmision distance on three equal length idler rolls
6
SNI 05-2267-1991
Sabuk -V dan sabuk V bergerigi, Pengujian dinamika untuk menentukan lokasi jarak
V- and V belts, Dynamic test to determine pitch zone location
3
SNI 05-2263-1991
Dawai baja sabuk berjalan, Pengukuran perpanjangan pada uji tarik
Steel cord conveyor belts, Measurement of elongation on traction test
4
SNI 05-2271-1991
Sabuk berjalan, Spesifikasi dan cara uji ketahanan api
Conveyor belts, Specification and test method for flame retardarts
4
SNI 05-2209-1991
Sabuk berjalan, Penandaan
Conveyor belts, Branding
3
SNI 05-2264-1991
Sabuk berjalan berdawai baja, Uji kuat rekat penutup lapisan inti
Steel corded conveyor belts, Adhesian strength test of the cover to the layer
3
SNI 05-2269-1991
Dawai baja sabuk berjalan, Uji rekat terhadap lapisannya
Steel cord conveyor belts, Cord - to - coating band test
3
SNI 7370:2008
Puli sabuk konveyor
Conveyor belts pulleys
12
SNI 7371:2008
Rol sabuk konveyor
Conveyor belts rolls
22
SNI 06-1404-1989
Sabuk V untuk kendaraan bermotor, Uji kelelahan
V belt for motor vehicles, Fatigue test
SNI 06-1546-1989
Sabuk - V untuk industri
V - belt for industry
11
SNI 06-1407-1989
Dimensi sabuk-V untuk kendaraan bermotor
V belt for motor vehicles, Dimension
19
- 68 -
5
21.220.30
Penggerak rantai dan komponennya
SNI 05-2783-1992
Chain drives and their components
Rantai mesin tipe bos
Machine chains, Bush type
- 69 -
6
23
FLUID SYSTEMS AND COMPONENTS FOR GENERAL USE
SISTEM FLUIDA DAN KOMPONEN UNTUK PENGGUNAAN UMUM
23.020
Fluid storage devices
Alat penyimpan fluida
23.020.01
Alat penyimpan fluida secara umum
SNI 7475:2008
23.020.10
Fluid storage devices in general
Penyaring bahan bakar curah cair ke tangki pendam (fillpot)
Liquid fuel filters for fillpot
Wadah dan tanki tidak bergerak
SNI 19-3031-1992
23.020.30
11
Stationary containers and tanks
Tangki baja berlas untuk penyimpanan minyak, Desain
Welding steel tanks for oil storage, Design
Bejana tekan, tabung gas
Pressure vessels, gas cylinders
SNI 13-3498-1994
Inspeksi bejana tekan
Pressure vessels inspection
SNI 05-3563-1994
Bejana tekan 1 - A
Pressure vessels 1 - A
SNI 7369:2008
Regulator tekanan rendah untuk tabung baja LPG
Low pressure regulators of LPG steel tubes
SNI ISO 10691:2010
Tabung gas - tabung baja hasil las yang dapat diisi ulang untuk liquefied petroleum gas (LPG) - Prosedur pengecekan, sebelum, selama dan setelah pengisian
Gas cylinders - Refillable welded steel cylinders for liquified petroleum gas (LPG) Procedures for checking before, during and after filling
74 306
ISO 10691:2004 Translation
IDT
SNI 1591:2008
Katup tabung baja LPG
LPG steel tubes valves. ICS 23.020.30
SNI 7659:2011
Katup tabung LPG tipe koneksi ulir
LPG cylinder valve threaded connection type
SNI 1452:2011
Tabung baja LPG
LPG steel cylinders
SNI 7369:2012
Regulator tekanan rendah untuk tabung LPG
Low pressure regulator for LPG cylinders
SNI 7618:2012
Regulator tekanan tinggi untuk tabung LPG
High pressure regulator for LPG cylinders
SNI 3330:2014
Pipa saringan untuk sumur air tanah
Pipe filter for ground water wells
SNI 1591:2012
Katup tabung LPG
LPG tubes valves
23.020.99
Alat penyimpan fluida lainnya
SNI 7618:2010
23.040
Other fluid storage devices
Regulator tekanan tinggi untuk tabung baja LPG
High pressure regulator for LPG steel tube
Pipeline components and pipelines
Komponen saluran pipa dan saluran pipa
SNI 6785:2010
23.040.01
Pipa fiberglass bertekanan rendah
Low-pressure fiberglass pipe
Komponen saluran pipa dan saluran pipa secara umum
Pipeline components and pipelines in general
SNI 19-3778-1995
Identifikasi warna pipa
Pipe colour identification
8
SNI 05-6324-2000
Pewarnaan tabung bertekanan, pipa udara dan pipa bahan air
Colour coding of pressure pipes, air pipes and liquid pipes
3
SNI 06-0112-1987
Pipa poliester serat gelas untuk saluran air bertekanan dan saluran air buangan
Glass fibre polyester pipes for pressurized water and waste water pipeline
8
SNI 19-6783-2002
Spesifikasi desinfeksi perpipaan air bersih
Desinfection specification for clean water pipelines
23.040.10
Pipa besi dan baja
14
Iron and steel pipes
SNI 05-3330-1994
Pipa saringan sumur bor untuk air, minyak dan gas
Drilled wells filter pipes for water, oil and gas
14
SNI 07-2225-1991
Pipa baja saluran air
Steel pipes for water supply
28
SNI 07-3083-1992
Pipa spigot dan soket dari besi tuang modular untuk jaringan pipa bertekanan, Bagian 2
Ductile cast iron spigot and socket pipes for pressure pipe lines - Part 2
SNI 07-3081-1992
Pipa besi tuang modular dan perlengkapan untuk aliran pipa tak bertekanan
Ductile cast iron pipes and accessories for non pressure pipe lines
12
SNI 07-2658-1992
Pipa baja stainless
Stainless steel pipe
23
SNI 07-3074-1992
Pipa dan penyambung dari besi tuang untuk air buang - Seri spigot
Cast iron drainage pipe and fittings - Spigot series
18
SNI 07-3090-1992
Pipa-pipa logam berbentuk lembaran bulat lurus dengan kampuh spiral jenis kunci dan pipa-pipa logam berbentuk lembaran persegi panjang lurus untuk distribusi udara
Straight circular sheet metal ducts with a lock type spiral seam and straight rectangular sheet metal duct for air distribution
5
SNI 07-4613-1998
Simbol yang digunakan untuk spesifikasi pada tube baja dan
Symbols for use in specification of steel tubes and fittings
4
SNI 0071:2008
Pipa baja las (kampuh) spiral
Spiral welded steel pipes, Specification and testing methods
SNI 0068: 2007
Pipa baja karbon untuk konstruksi umum
Carbon steel pipes for general structure
SNI 6469:2012
Tata cara pembangunan sumur produksi dengan pengeboran sistem sirkulasi langsung
The procedure for the construction of production wells with drilling circulation system directly
SNI ISO 10893-7:2014
Uji tak rusak pada tabung baja - Bagian 7: Uji radiografi digital sambungan las dari tabung baja yang dilas untuk deteksi ketidaksempurnaan (ISO 10893-7:2011, IDT)
Nondestructive testing on steel tubes - Part 7: Test of digital radiography of welded joints of welded steel tubes for the detection of imperfections
5
ISO 10893:2011 IDT SNI 8052:2014
Pipa baja untuk pancang
Steel pipe for saplings
SNI 07-0067-1987
Pipa baja karbon untuk konstruksi mesin, Mutu dan cara uji
Carbon steel pipes for machines structure, Specification and test method
14
SNI 03-6719-2002
Spesifikasi pipa baja bergelombang dengan lapis pelindung logam untuk pembuangan air dan drainase bawah tanah
Specification of corrugated steel pipes with metallic-coated for sewage and underground drainage
27
SNI 07-1813-1990
Pipa baja saluran air, Lapisan bagian dalam dengan menggunakan adukan semen
Steel pipes for water supply, Interior layer using cement mix
3
SNI 07-0242-1989
Mutu dan cara uji pipa baja tanpa kampuh
Specification and test methods of seamless steel pipes for steam boilers and superheaters
7
SNI 07-1857-1990
Pipa tanah dari besi tuang kelabu
Grey cast iron ground pipe
5
SNI 07-1343-1989
Pipa baja coal-tar enamel, lapis lindung bagian luar
Coal for enamel exterior protective coatings steel pipes
SNI 07-0950-1989
Pipa dan pelat baja bergelombang lapis seng
Zinc coated steel pipes and corrugated plates
17
SNI 07-0310-1989
Pipa baja karbon untuk minyak dan gas, Cara uji mekanis las
Carbon steel pipes for petroleum and gas, Mechanical test methods for welding
16
SNI 07-0242.1-2000
Spesifikasi pipa baja yang dilas dan tanpa sambungan dengan lapis hitam dan galvanis panas
Specification for black and hot-dipped zinc-coated (galvanized) welded and seamless steel pipes
16
- 70 -
4
SNI 07-0728-1989
Pipa-pipa baja pengujian tinggi untuk saluran pada industri minyak dan gas bumi
High tested steel pipes for petroleum and natural gas industries
84
SNI 07-0537-1989
Pipa-pipa baja untuk saluran minyak dan gas bumi
Steel pipes for petroleum and natural gas pipeline
66
23.040.15
Pipa logam bukan besi
Non-ferrous metal pipes
SNI 03-0321-1989
Mutu dan cara uji pipa asbes semen
Asbestos cement pipes, Specification and test methods
12
SNI 07-1354-1989
Pipa las tembaga kuningan
Copper and bronze welded pipes
13
23.040.20
Pipa plastik
Plastics pipes
SNI 06-2555-1991
Pipa PVC untuk air minum, Metode pengujian kadar PVC dengan TFH
PVC pipes for drinking water, Test methods for PVC content by TFH
SNI 06-2554-1991
Metode pengujian untuk ketahanan pipa PVC untuk air minum terhadap metilena chlorida
Test method for constancy to chloride methylene of PVC pipes for dringking water
10
SNI 06-2553-1991
Metode pengujian perubahan panjang pipa PVC untuk air minum dengan uji tungku
Test method for change of length of PVC pipes for drinking water by stove methods
10
SNI 06-2552-1991
Pipa PVC untuk air minum, Metode pengambilan contoh uji
PVC pipes for drinking water, Method for sampling
SNI 06-2551-1991
Pipa PVC untuk air minum, Metode pengujian bentuk dan sifat tampak
PVC pipes for dringking water, Test method for shape and visible characteristics
12
SNI 06-2550-1991
Pipa PVC untuk air minum, Metode pengujian ketebalan dinding
PVC pipes for drinking water, Test methods for wall thickness
13
SNI 13-3502-1994
Sistem penyisipan pipa polyethelene untuk gas bumi
Polyethelene pipe slippage system for gas
17
SNI 06-2548-1991
Metode pengujian diameter luar pipa PVC untuk air minum dengan jangka sorong
PVC pipes for dringking water, Test method for outside diameter by vernier callipers
13
SNI 06-2556-1991
Metode pengujian diameter luar pipa PVC untuk air minum dengan pita meter
Test methods for drinking water PVC pipes diameter by meter band
SNI 06-2549-1991
Pipa PVC untuk air minum, Metode pengujian kekuatan terhadap tekanan hidrostatik
PVC pipes for dringking water, Test method for strength to hydrostatic pressure
SNI 06-6419-2000
Spesifikasi pipa PVC bertekanan diameter (110-135) mm untuk air bersih
Specification for pressured PVC pipes, (110-135) mm in diameter for clean water
SNI 06-4384-1996
Pipa ABS (Acrylonitrile Butadiene Styrene) bertekanan
Pressure ABS pipes (Acrylonitrile Butadiene Stryene)
36
SNI 06-0084-2002
Pipa PVC untuk saluran air minum
PVC pipe for drinking water pipeline
28
SNI 06-4821-1998
Metode pengujian dimensi pipa polietilena (PE) untuk air minum
Test methods for dimension of polyethylene (PE) pipes for drinking water
13
SNI 06-4829-2005
Pipa polietilena untuk air minum
Polyethylene pipes for drinking water
35
8
6
7 16 9
ISO 4427: 1996, Polyethylene (PE) pipes for water supply - Specifications Translation SNI ISO 16422:2014
MOD Pipa dan sambungan dibuat dari polivinil klorida non plastisasi terorientasi (PVC-O) untuk mengalirkan air bertekanan - Spesifikasi (ISO 16422:2014, IDT)
Pipes and joints made of oriented unplasticized poly (vinyl chloride) (PVC-O) for the conveyance of water under pressure — Specifications
ISO 16422:2014 IDT SNI 4829.2:2012
Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 2: Pipa
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes
ISO 4427-2:2007 (2010-10) MOD
MOD
SNI 06-0178-1987
Pipa PVC untuk saluran air buangan di luar dan di dalam bangunan, Sambungan
PVC pipes for waste water outside and inside buildings, Fittings
19
SNI 06-0162-1987
Pipa PVC untuk saluran air buangan di dalam dan di luar bangunan
PVC pipes for waste water pipeline, outside and inside building
5
SNI 19-6778-2002
Metode pengujian tekanan internal pada sambungan mekanik pipa PE
Test methods for natural pressure on mechanical fittings of PE pipelines
8
SNI 19-6781-2002
Metode pengujian kehilangan tekanan pada sistem sambungan mekanik pipa polietilena (PE)
Test method for the lost of pressure on mechanical fittings systems of PE pipes
SNI 19-6780-2002
Metode penentuan densitas referensi polietilena (PE) hitam dan PE tidak berwarna pada pipa PE dan sambungan
Determination methods for black polyethilene (PE) and un-colour PE pipes it's fittings
SNI 19-6779-2002
Metode pengujian perubahan panjang pipa polietilena (PE)
Test methods for polyethilene pipes (PE) alteration of elongation
23.040.40
Penyambung logam
13 9 10
Metal fittings
SNI 07-3080-1992
Penyambung pipa baja tahan karat dengan las tumpu
Stainless steel butt - Welding fittings
42
SNI 07-3360-1994
Penyambung pipa baja karbon dan baja paduan dengan las tumpu
Carbon and alloy steel butt welding fittings
23
SNI 05-3073-1992
Penyambungan baja tanpa paduan berulir
Non-alloy steel threaded fitting
16
SNI 07-2951-1992
Penyambung pipa air minum bertekanan dari besi cor bergrafit bulat
Spheroidal graphite cast iron pressure drinking water pipe fittings
21
SNI 07-3082-1992
Pipa penyambung dan perlengkapan dari besi tuang modular untuk jaringan pipa bertekanan, Bagian 1
Ductile cast iron pipes fittings and accessories for pressure pipe lines. Part 1
36
SNI 0139:2008
Penyambung pipa berulir besi cor maleable hitam
Black malleable cast iron threaded pipe fittings
65
SNI 07-1769-1990
Penyambung pipa air minum bertekanan dari besi tuang kelabu
Grey cast iron fittings for pressured drinking water pipes
36
23.040.45
Penyambung plastik
Plastics fittings
SNI 06-4385-1996
Fitting ABS bertekanan dengan larutan semen
Pressure ABS pipe fittings with cement solution
SNI 4829.3:2012
Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 3: Fitting
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 3: Fittings
ISO 4427-3:2007 (2010-10) MOD SNI 4829.1:2012
MOD Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 1: Umum
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 1: General
ISO 4427-1:2007 (2010-10) MOD SNI 4829.5:2012
MOD Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 5: Kesesuaian penggunaan dalam sistem
ISO 4427-5:2007 (2010-10) MOD
MOD
- 71 -
Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 5: Fitness for purpose of the system
22
SNI 4829.1:2015
Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 1: Umum (ISO 4427-1:2007, MOD)
Plastic piping systems - Pipe polyethylene (PE) and fittings for water supply systems - Part 1: General (ISO 4427-1: 2007, MOD)
21
Plastic piping systems - Pipe polyethylene (PE) and fittings for water supply systems - Part 2: Pipes (ISO 4427-2: 2007, MOD)
30
Plastic piping systems - Pipe polyethylene (PE) and fittings for water supply systems - Part 3: Fittings (ISO 4427-3: 2007, MOD)
41
PVC pipes fittings for drinking water pipeline
17
ISO 4427-1:2007 MOD SNI 4829.2:2015
Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 2: Pipa (ISO 4427-2:2007, MOD)
ISO 4427-2:2007 MOD SNI 4829.3:2015
Sistem perpipaan plastik - Pipa polietilena (PE) dan fiting untuk sistem penyediaan air minum - Bagian 3: Fiting (ISO 4427-3:2007, MOD)
ISO 4427-3:2007 MOD SNI 06-0135-1987
23.040.50
Pipa dan Penyambung pipa dari bahan lain
SNI 03-0445-1989
23.040.60
Sambungan pipa PVC untuk saluran air minum
Pipes and fittings of other materials
Pipa beton tanpa tulangan
Unreinforced concrete pipes
Flensa kopling dan Penyambung
7
Flanges, couplings and joints
SNI 05-3078-1992
Flensa logam - Flensa besi tuang
Metal flanges - Cast iron flanges
40
SNI 05-3076-1992
Flensa untuk teknologi vakum, Dimensi
Flange for vacuum technology, Dimension
13
SNI 05-2195-1991
Permukaan flensa pipa, Dimensi
Pipe flange facing, Dimension
SNI 05-2196-1991
Flensa pipa, Toleransi dimensi
Pipe flanges, Dimension tolerances
SNI 05-3085-1992
Pipa flensa untuk pendingin
Pipe flanges for refrigerators
18
SNI 05-3079-1992
Flensa tembaga paduan dan komposit
Copper alloy and composit flanges
37
SNI 05-3077-1992
Flensa mampu panas untuk teknologi vakum, Dimensi
Bakable flanges for vacuum technology, Dimensions
8
SNI 10-4831-1998
Ukuran flensa sambungan darat internasional untuk pemadam kebakaran di kapal
Sizes of international shore fitting flange for fire extinguishers in ships
2
SNI 10-4830-1998
Ukuran flensa sambungan pembuangan limbah minyak di kapal
Sizes of oil waste disposal fitting flange in ships
3
SNI 07-6404-2000
Spesifikasi flensa pipa baja untuk penyediaan air ukuran 110 mm- 366 mm
Specification of steel pipe flanges for water supply size 110 mm-366 mm
23.040.70
Selang dan perangkat selang
7 7
13
Hoses and hose assemblies
SNI 05-3075-1992
Tabung dan selang penyambung dengan pelebaran tipe 37 dan tanpa pelebaran tipe 24 untuk sistem hidraulik, Dimensi dan desain
Connection for tubes and hoses for 37 flares and 24 flareless fittings for hydraulic system, Dimension and design
SNI 06-3093-1992
Selang karet industri untuk udara kompresi (sampai dengan 2,5 Mpa)
Industrial rubber hoses for compressed air (up to 2,5 Mpa)
SNI 06-4560-1998
Selang plastik vinil fleksibel
Flexible vinyl plastic hoses
SNI 06-4379-1996
Pipa karet penghisap debu
Rubber hoses for dust collectors
SNI ISO 4641:2014
Selang karet dan perakitan selang untuk penghisapan dan pelepas air Spesifikasi (ISO 4641:2010, IDT)
Rubber hoses and hose assemblies for water suction and discharge - Specification
10 5 15 3
ISO 4641:2010 IDT SNI ISO 6803:2014
Selang karet atau plastik dan arakitan selang - Uji denyut tekanan hidrolik tanpa tekukan (ISO 6803:2008, IDT)
Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing
ISO 6803:2008 IDT SNI ISO 1403:2014
Selang karet berpenguat tekstil untuk pemakaian air secara umum Spesifikasi (ISO 1403:2005, IDT)
Rubber hoses textile-reinforced for general purposes water applications - Specifications
ISO 1403:2005 IDT SNI ISO 8331:2014
Selang karet dan plastik rakitan selang - Panduan untuk pemilihan, penyimpanan, penggunaan dan pemeliharaan (ISO 8331:2014, IDT)
Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance
ISO 8331:2014 IDT SNI ISO 8030:2015
Selang karet dan plastik - Metode uji bakar ISO 8030:2014, IDT)
Rubber and plastic hoses - Methods of test fuels ISO 8030: 2014, IDT)
13
Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2006, IDT)
24
ISO 8030:2014 IDT SNI ISO 8308:2015
Selang dan perpipaan dari karet dan plastik - Penentuan penyaluran cairan melalui selang dan dinding pipa (ISO 8308:2006, IDT)
ISO 8308:2006 IDT SNI 09-1002-1989
23.040.80
Specification for drinking water, waste water and rain water pipe fitting rubber seal rings
8
Other pipelines components
Tata cara pemasangan perpipaan besi daktil dan perlengkapannya
Procedure for the installation of ductile - iron and their appurtenance
24
Valves
Katup
23.060.01
8
Seals for pipe and hose assemblies
Spesifikasi cincin karet sambungan air minum, air limbah dan air hujan
Komponen saluran pipa lainnya
SNI 19-6782-2002
23.060
Rubber hoses for four whell or more motor vehicles
Segel untuk perangkat pipa dan selang
SNI 06-4828-1998
23.040.99
Pipa air karet untuk kendaraan bermotor roda empat atau lebih
Katup secara umum
Valves in general
SNI 05-4012-1996
Cara uji kebocoran katup air
Leak testing methods for water valves
3
SNI 05-2220-1991
Katup industri, Pengujian tekanan untuk katup
Industrial valves, Pressure testing for valves
6
SNI 04-6287.5-2000
Katup kendali proses industri. Bagian 5: Penandaan
Industrial-process control valves. Part 5: Marking
7
IEC 534-5: 1982, Industrial-process control valves - Part 5: Marking Translation SNI 13-6908-2002
IDT Inspeksi dan pengetesan katup
Valve inspection and testing
22
Threaded bronze horizontal directional valve 1,0 MPa (10kgf/cm2)
11
American Petroleum Institute (API) 598, Valve and inspection and testing Translation SNI 05-0168-1998
MOD Katup searah horizontal kuningan berulir 1,0 MPa (10kgf/cm2)
- 72 -
SNI 05-0167-1987
Katup kaki searah kuningan berulir 0,5 MPa (5 kgf/cm2)
Threaded bronze of directional foot valve, 0,5 MPa (5 kgf/cm2)
5
SNI 05-1070-1989
Katup searah vertikal kuningan berulir 0,5 MPa (5kgf/cm2)
Threaded brass vertical directional valve 0,5 MPa (5 kgf/cm2)
7
23.060.10
Katup globa
Globe valves
SNI 10-6086-1999
Katup globa baja tuang 20 kgf/cm2 untuk marin
Marine cast steel globe valves 20 kgf/cm2
SNI 10-6085-1999
Katup globa perunggu 16 kgf/cm2 untuk marin
Marine bronze globe valves 16 kgf/cm2
7
SNI 10-6084-1999
Katup globa perunggu 5 kgf/cm2 untuk marin
Marine bronze globe valves 5 kgf/cm2
10
SNI 05-0825-1989
Katup kontrol flensa jenis globe dari baja cor. Diameter lubang
Cast steel flanged control valves of globe type. Diameter of the hole
2
SNI 05-0824-1989
Katup kontrol flensa jenis globe dari baja cor, Ukuran ujung ke ujung
Cast steel flanged control valves of globe type, Dimension from end to end
2
23.060.30
Katup pintu
9
Gate valves
SNI 05-3764-1995
Katup pintu bertekanan 1,0 MPa untuk air
Pressure gate valves 1,0 MPa for water
9
SNI 0166:2008
Katup searah horizontal kuningan berulir kelas 125 untuk air
Threaded bronze horizontal directional valve 125 class for water
8
SNI 0168:2008
Katup pintu kuningan berulir kelas 125, 150, dan 250 untuk air, minyak dan gas
Threaded bronze valve of 125, 150 and 250 classes for water, petrol and gasses
10
SNI 05-0166-1998
Katup pintu kuningan berulir 1,0 MPa dan 1,5 MPa (10 kgf/cm2 dan 15 kgf/cm2)
Threaded bronze gate valves 1,0 MPa and 1,5 MPa (10 kgf/cm2 and 15 kgf/cm2)
6
23.060.40
Regulator tekanan
Pressure regulators
SNI 05-2301-1991
Katup pengaman - Kegunaan umum
Safety valves - General requirements
SNI 04-6287.6-2000
Katup kendali proses industri - Bagian 6: Rincian pemasangan untuk penyambung pemosisi ke aktuator katup kendali
Industrial process control valves - Part 6: Mounting detail for attachment of positions to control valve actuators
11 8
IEC 534-6: 1985, Industrial electrotechnical-process control valves - Part 6: Mounting details for attachment of positions to control valve actuators Translation
23.060.50
IDT
Katup periksa
SNI 05-0731-1989
23.060.99
Check valves
Katup kontrol dari baja cor, Cara uji unjuk kerja
Cast steel control valves, Test code for performance
Katup lainnya
12
Other valves
SNI 05-3054-1992
Katup stop refrijerasi
Stop valves for refrigeration
SNI 05-3283-1994
Katup susun modular empat lubang lalu dan katup pengatur arah empat lubang keluar - Ukuran jenis 03 dan 05 - Dimensi klem
Four - port modular stack valves and four port directional control valves, size 03 and 05 Clamping dimensions
3
SNI 10-6088-1999
Katup siku perunggu 16 kgf/cm2 untuk marin
Marine bronze angle valves 16 kgf/cm2
7
SNI 10-6087-1999
Katup siku perunggu 5 kgf/cm2 untuk marin
Marine bronze angle valves 5 kgf/cm2
9
SNI 05-0165-1987
Katup pelampung kuningan berulir 0,5 MPa (5 kgf/cm2)
Threaded bronze floater valve 0,5 MPa (5 kgf/cm2)
5
SNI 05-0169-1987
Katup stop kuningan berulir 0,5 MPa (5 kgf/cm2)
Threaded bronze stopper valve 0,5 MPa (5 kgf/cm2)
6
SNI 05-0170-1987
Katup sumbat kuningan berulir 0,5 MPa (5 kgf/cm2)
Threaded bronze clog valve 0,5 MPa (5 kgf/cm2)
8
23.080
21
Pumps
Pompa
SNI 05-3504-1994
Pompa angguk
Pumps
SNI 03-6570-2001
Instalasi pompa yang dipasang tetap untuk proteksi kebakaran
Installation of stationary pumps for fire protection
83
SNI 05-0058-2002
Mutu dan cara uji pompa air tangan torak dangkal
Specification and test methods of hand water piston pumps
19
SNI 04-6292.2.41-2003
Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-41: Persyaratan khusus untuk pompa
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
15
111
IEC 60335-2-41: 1996-02, Safety of household and similar electrical appliances - Part 2-41 : Particular requirements for pumps for liquids having temperature not exceeding 35 degree C Translation
IDT
SNI 04-6292.2.41-2003(1)
Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-41: Persyaratan khusus untuk pompa
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
15
SNI 05-6437-2000
Metode pengujian kinerja pompa dengan menggunakan model
Performance test methods for pumps using test models
27
SNI 7518:2009
Pompa rotodinamik - Cara uji unjuk kerja hidrolis, kelas 1 dan 2
Rotodynamic pumps - hidraulic performance testing methods, grade 1 and 2
SNI ISO 9908:2010
Spesifikasi Teknis untuk Pompa Sentrifugal- Kelas III
Technical specifications for centrifugal pumps - Class III
ISO 9908:1993 Technical specifications for centrifugal pumps - Class III Translation
IDT
SNI 0141.2:2008
Pompa air sentrifugal untuk irigasi - Unjuk kerja
Centrifugal water pumps for irrigation - Performance
SNI ISO 5199:2010
Spesifikasi Teknis untuk Pompa Sentrifugas - Kelas II
Technical specifications for centrifugal pumps - Class II
9
ISO 5199:2002 Technical specifications for centrifugal pumps - Class II Translation
IDT
SNI 0141:2009/ Amd1:2011
Pompa air sentrifugal untuk irigasi - unjuk kerja dan cara uji Amamdemen 1
Centrifugal water pumps for irigation - Test method and performance Amandement 1
SNI ISO 17613-1:2012
Pompa yang dioperasikan secara manual untuk air minum - Pemilihan dan penerimaan
Manually operated pumps for drinking water -- Selection and acceptance -- Part 1: Southeast Asia
ISO 17613-1:2006 (2009-10) IDT
IDT
SNI 05-0148-1987
Pompa air tangan torak dalam
Hand dip piston water pumps
SNI 05-1810-1990
Pompa sentrifugal yang umum digunakan pada industri minyak dan gas bumi
Centrifugal pumps for petroleum and natural gas industry
23.100
Sistem daya fluida secara umum
SNI 05-3665-1995
23.100.10
43
Fluid power systems
Sistem daya fluida
23.100.01
7
Fluid power systems in general
Sistem daya fluida dan komponen - Lubang laluan metrik - Dimensi dan desain
Pompa dan motor
Fluid power system and components - Metric ports - Dimension and design
3
Pumps and motors
SNI 04-3865-1995
Pedoman untuk komisioning, operasi dan pemeliharaan pompa penyimpanan dan turbin pompa yang bekerja sebagai pompa
Guides for commisioning, operation and maintenance for storage pumps and pump turbines operating as pumps
SNI 8051:2014
Metode uji unjuk kerja motor bakar cetus api berpendingin udara ukuran kecil untuk kegunaan umum
The test method performance internal of piston engine fire air-cooled small size for general purpose
- 73 -
29
SNI IEC 60335-2-51:2010
Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-51: Persyaratan khusus untuk pompa sirkulasi stasioner untuk pemanasan dan instalasi layanan air
Household and similar electrical appliances - Safety - Part 2.51: Particular requirements for stationer circulation pumps for heating and water service instalation
IEC 60335-2-51 ed 3.1 Consol. with am1 (2008-07) Translation
23.100.20
IDT
Silinder
Cylinders
SNI 05-3664-1995
Sistem daya fluida dan komponen - Silinder - Langkah torak seri dasar
Fluid power system and components - Cylinders - Piston rod thread dimensions and types
2
SNI 05-3663-1995
Sistem daya fluida dan komponen - Silinder - Tipe dan dimensi ulir batang torak
Fluid power system and component - Cylinders - Type and dimension of piston strokes
2
SNI 05-3659-1995
Daya fluida hidrolik - Silinder - Ujung batang berlubang bulat (Rod end spherical eyes) - Dimensi dudukan
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimension
4
23.100.30
Perpipaan, kopling, katup dan saringan
Piping, couplings, valves and filters
SNI 05-3661-1995
Daya fluida hidrolik - Katup pengatur arah empat lubang laluan - Permukaan dudukan
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
SNI 05-3660-1995
Daya fluida hidrolik - Rakitan selang/hose assemblies - Metode uji
Hydraulic fluid power - Hose assemblies - Methods of tests
23.120
14 8
Ventilators. Fans. Air-conditioners
Ventilasi, Kipas angin, Pengatur udara
SNI 04-3888.1-1995
Persyaratan keamanan untuk kipas angin listrik serta pengatur kecepatannya. Bagian 1 : Kipas angin serta pengatur kecepatannya untuk pemakaian rumah tangga dan sejenisnya
Safety requirements of fans and its regulators - Part 1: Fans and regulators for household and similar appliances
14
SNI 05-3052-1992
Unit pengkondisian udara, Cara uji
Unitary air conditioners, Test methods
39
SNI 05-3053-1992
Unit pengkondisian udara dan untuk kapasitas pendinginan atau pemanasan sampai dengan 23.000 Kkal/Joule (26.744 W)
Unitary air conditioners and for cooking or heating capacity up to 23.000 Kkal/Joule (26.744)
20
SNI 04-4516-1998
Persyaratan keamanan untuk kipas angin listrik serta pengatur kecepatannya
Safety requirements of electric fan and speed regulators
29
SNI 04-6292.2.80-2006
Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-80: Persyaratan khusus untuk kipas angin
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
24
SNI 04-6292.2.80-2003(2)
Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-80: Persyaratan khusus untuk kipas angin
Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans
14
IEC 60335-2-80: 2002-09 Translation SNI IEC 60335-2-40:2009
IDT Peralatan listrik rumah tangga dan peralatan listrik serupa - Keselamatan Bagian 2-40 : Persyaratan khusus untuk pompa kalor listrik, pengkondisi udara dan pengering udara
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
IEC 60335-2-40 {Ed.4.2}. Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers Translation SNI IEC 60335-2-40:2010
IDT Peranti listrik rumah tangga dan sejenisnya - Keselamatan - Bagian 2-40: Persyaratan khusus untuk pompa bahang listrik, penyaman udara dan penurun lembab
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air conditioner and dehumidifiers
IEC 60335-2-40 ed 4.2 Consol. with am1&2 (2005-07) Translation SNI IEC 60879:2013
IDT Kinerja dan konstruksi kipas angin listrik dan regulator
Performance and construction of electric circulating fans and regulators
16
Air conditioners cooling air and air to air heat pumps - Test methods and calculations for seasonal performance factors - Part 2: Heating - seasonal performance factor (ISO 163582:2013 + Cor.1:2013, IDT)
54
IEC 60879 :1986 Translation
IDT
SNI IEC ISO 16358-2:2016 Pengkondisi udara pendinginan udara dan pompa panas udara ke udara Metode pengujian dan penghitungan untuk faktor kinerja musiman - Bagian 2: Pemanasan - Faktor kinerja musiman (ISO 16358-2:2013 + Cor.1:2013, IDT) ISO 16358-2:2013 + Cor.1:2013 IDT SNI ISO 5151:2015
Pengkondisi udara dan pompa kalor non-saluran - Pengujian dan penilaian kinerja (ISO 5151:2010, IDT)
Air conditioning and heat pump non-channel - Testing and assessment of performance (ISO 5151: 2010, IDT)
100
ISO 5151:2010 IDT SNI 19-6713-2002
Pengkondisian udara dan pompa kalor tanpa saluran - Pengujian dan penilaian kinerja
Air conditioning and heat pumps without - channels - Testing and performance assesment
58
ISO 5151 Translation
23.140
MOD
Compressors and pneumatic machines
Kompresor dan mesin pneumatik
SNI 05-3094-1992
Kompresor dan alat-alat pneumatik, Tekanan yang disyaratkan
Compressor and pneumatic tools, Preferred pressures
SNI 05-2224-1991
Kompresor udara torak ukuran kecil
Small size reciprocating air compressors
SNI 05-3087-1992
Kompresor pendingin, Kondisi standar untuk penetapan tingkat temperatur (rating temperature)
Refrigerating compressor, Standards condition of rating temperatur
2
SNI 05-3084-1992
Klasifikasi kompresor
Compressors classification
6
SNI 04-4517-1998
Pedoman dan prosedur pengoperasian dan keamanan pemasangan instrumen pneumatik yang digerakkan oleh gas proses asosiasi
Guidelines for operating procedures and safety instalation of pneumatic instrument driver by associated process gas
5
SNI IEC 60335-2-34:2010
Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-34: Persyaratan khusus untuk motor-kompresor
Household and similar electrical appliances - Part 2-34: Particular requirements for motorcompressors
IEC 60335-2-34 ed 4.2 Consol. with am1&2 (2009-01) Translation
IDT
- 74 -
3 31
25
MANUFACTURING ENGINEERING
REKAYASA MANUFAKTUR
25.040
Industrial automation systems
Sistem otomasi industri
25.040.10 SNI ISO 10791-2:2013
Kondisi uji untuk machining centres - Bagian 2: Pengujian geometrik untuk mesin dengan spindel vertikal atau kepala umum dengan sumbu putar utama vertikal (sumbu-Z vertikal
Test Conditions for Machining Centeres - Part 2: Geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis).
49
Test Conditions for Machining Centeres - Part 4: Accuracy and repeatability of positioning of linier and rotary axes
13
ISO 10791-2: 2001 Translation SNI ISO 10791-4:2013
IDT Kondisi uji untuk machining centres - Bagian ke 4: Ketelitian dan mampu ulang pemosisian sumbu linier dan sumbu putar
ISO 10791-4: 1998 Translation
25.040.20
SNI 05-3099-1992
25.040.40
IDT
Mesin kontrol numerik
Numerically controlled machines
Kontrol numerik mesin - Simbol
Numerical control of machines - Symbols
Pengukuran proses industri dan kontrol
15
Industrial process measurement and control
SNI 04-4189-1996
Kondisi operasi untuk peralatan pengukuran dan kendali proses industri Bagian 1: Suhu, kelembaban dan tekanan barometrik
Operational condition for measuring and industrial process control instruments - Part 1: Temperature, humidity and barometric pressure
SNI 04-3902.2-1995
Sinyal analog untuk sistem kendali proses - Bagian 2 : Sinyal tegangan searah
Analogue signals for process control systems - Part 2: Direct current signals
SNI 04-3903.2-1995
Kondisi operasi untuk pengukuran proses industri dan peralatan kendali Bagian 2: Daya
Operational condition for industrial process and control equipment measurement - Part 2: Power
12
SNI 19-3275-1994
Fungsi - fungsi kontrol dan instrumentasi pengukuran proses representasi simbolik - Bag.4 : Simbol-simbol dasar untuk komputer proses, antarmuka dan peraga / fungsi - fungsi kontrol terdistribusi
Process measurement control function and instrumentation - Symbolic representation. Part 4 : Basic symbols for process computer, interface, and shared display/control functions
19
SNI 19-3274-1994
Fungsi - fungsi kontrol dan instrumentasi pengukuran proses - Representasi simbolik Bag.3 : Simbol rinci untuk diagram interkoneksi instrumentasi
Process measurement control function and instrumentation - Symbolic representation Part 3 Detailed symbols for instrument interconnection diagram
29
SNI 19-3276-1994
Fungsi - fungsi kontrol dan instrumentasi pengukuran proses - Representasi simbolik. Bag.1 : Perlengkapan dasar
Process measurement control functions and instrumentation symbolic representation Symbolic representation. Part 1 : Basic requirements
22
SNI 19-3273-1994
Fungsi - fungsi kontrol dan instrumentasi proses - Representasi simbol. Bag 2 : Perluasan dasar
Process measurement control function and instrumentation - Symbolic representation Part 3 Detailed symbols for instrument interconnection diagram
18
SNI 04-6259.5-2000
Pengukuran dan kontrol proses industri - Evaluasi sifat sistem untuk asesmen sistem - Bagian 5: Asesmen ketergantungan sistem
Industrial process measurement and control - Evaluation of system properties for system assessment - Part 5: Assessment of system dependability
25
25.060 25.060.10
25 3
Machine tools systems
Sistem mesin perkakas Unit modular dan peralatan lain
Modular units and other devices
SNI 05-3109-1992
Unit modular untuk konstruksi perkakas - Basis sayap dan kolom
Modular units for machine tools construction - Wing bases for columns
2
SNI 05-1628-1989
Unit modul untuk konstruksi mesin perkakas - Unit peluncur
Modular unit for machine tool construction - Slider units
2
25.060.20
Alat pembagi dan pemegang benda kerja perkakas
Dividing and tool-workpiece holding devices
SNI 05-3692-1995
Ring untuk perkakas tuntun dan pegang
Ring for jig and fixture
7
SNI 05-3691-1995
Pin lokasi untuk perkakas tuntun dan pegang
Locate pins for jigs and fixtures
7
SNI 05-6305.2-2000
Ragum meja berbadan pendek
Short bench vices
6
SNI 05-6306.1-2000
Pelat cekam 4 penjepit bebas untuk mesin perkakas
Independent 4 clamp chucks for machine tools
8
SNI 05-6307.1-2000
Arbor tangkai lurus untuk remer
Straight shank arbor for shell reamers
5
SNI 05-6306.2-2000
Pelat cekam 3 penjepit untuk mesin perkakas
Independent 3 clamp chucks for machine tools
SNI 05-6305.1-2000
Ragum meja berbadan panjang
Parallel bench vices
7
SNI 05-6307.2-2000
Arbor tangkai tirus untuk remer
Taper shank arbors for shell reamers
5
SNI 05-4880-1998
Pendukung klem bertangga
Stepped packing blocks as support for clamps
SNI 05-6308-2000
Grip
Grips
25.080 25.080.01
20
3 10
Machine tools
Mesin perkakas Mesin perkakas secara umum
Machine tools in general
SNI 05-2930-1992
Mesin perkakas, Cara uji ketelitian geometrik, unjuk kerja dan ketelitian
Machine tools, Geometric test for performance and accuracy
SNI 05-2277-1991
Mesin perkakas - Ketirusan swapegang untuk tangkai perkakas
Machine tools - Self-holding tapers for tool shanks
9
SNI 05-1202-1989
Cara uji coba, unjuk kerja dan ketelitian mesin perkakas
Trial tests for performance and accuracy of machine tools
9
SNI 05-1203-1989
Simbol-simbol mesin perkakas
Graphical symbols of machine tools
12
SNI 19-1505-1989
Mesin perkakas, Cara pengukuran tingkat bunyi
Machine tools, Noise level measurement
10
25.080.10
Pahat bubut
Lathes
SNI 05-1206-1989
Ukuran mampu tukar senter mesin bubut
Interchangeability sizes of centre of lathes
SNI 05-1612-1989
Mesin bubut universal, Cara uji
Universal lathes, Test methods
SNI 05-1618-1989
Mesin bubut universal, Cara uji ketelitian geometrik
Universal lathes, Test method for geometric accuracy
SNI 05-1205-1989
Tinggi ruang duduk pada dudukan pahat mesin bubut
Overall internal height of chisel positions of lathers
25.080.20
Mesin gerek dan mesin fris
3 5 10 3
Boring and milling machines
SNI 05-3342-1994
Batang pahat pembesar lubang untuk mata pahat yang disisipkan - Ukuran
Boring bars for indexable inserts - Dimension
SNI 05-1622-1989
Mesin fris kombinasi gerek dengan spindle horizontal tipe meja, Cara uji ketelitian geometrik
Combined milling and drilling machines with horizontal spindle, table type, Test methods for geometric accuracy
SNI 05-1192-1989
Mesin potong pelat logam dengan pengarah rangka pisau paralel, Cara uji ketelitian
Metal plate cutting machines with parallel guided knife beam, Test code for accuracy
6
SNI 05-1366-1989
Mesin potong pelat logam dengan rangka pengarah pisau paralel, Batas ukuran
Metal plate cutting machines with parallel guided knife beam, Limits of dimensions
2
SNI 05-1620-1989
Mesin fris dengan tinggi meja dapat diubah dengan spindel horizontal atau vertikal, Cara uji ketelitian geometrik
Milling machines with adjustable table height with horizontal or vertical spindle, Test methods for geometric accuracy
- 75 -
6 17
12
SNI 05-1621-1989
25.080.40
Mesin fris kombinasi gerek dengan spindle horizontal tipe lantai, Cara uji ketelitian geometrik
Mesin bor
Combined milling and rilling machines with horizontal spindle, floor type, Test methods for geometric accuracy
Drilling machines
SNI 05-1359-1989
Mesin gurdi vertikal tipe kolom, Cara uji geometrik
Pillar type vertical drilling machines, Geometric test methods
SNI 05-1207-1989
Mesin gurdi radial, Cara uji unjuk kerja dan ketelitian
Radial drilling machines, Performance and accuracy tests methods
SNI 05-1196-1989
Mesin gurdi vertikal kombinasi fris tipe kolom dengan ketinggian mesin tetap, Cara uji geometrik
Pillar type vertical drilling machines with table of fixed height, Test methods
25.080.50
Mesin asah dan poles Roda gerinda pemotong jenis alumina dengan pengikat resin
Alumina resinoid cutting grinding wheels
SNI 05-2175-1991
Mesin gerinda silinder dalam dengan silinder horizontal, Cara uji praktis
Internal cylindrical grinding machines with horizontal cylinders, Practical test methods
SNI 15-2229-1991
Roda gerinda alumina dengan pengikat resin
Alumina resinoid grinding wheels
SNI 05-1362-1989
Mesin gerinda permukaan dengan spindel horizontal, Cara uji geometris
Surface grinding machines with horizontal spindle, Geometric test methods
SNI 05-0667-1989
Bola pelumat dari logam ferro
Ferrometals grinding balls
SNI 05-1623-1989
Mesin gerinda datar dengan spindle vetikal tipe meja ulang-alik, Cara uji ketelitian geometrik
Flat grinding machines with vertical spindle, recprocating table, Test method for geometric accuracy
SNI 8029:2014
25.100.01
25.100.10
Mesin pemarut multi komoditi hasil pertanian - Syarat mutu dan metode uji Tipe rol
Multi grater machine agricultural commodities - Quality requirements and test methods roller type
Mesin perajang tembakau - Syarat mutu dan metode uji
Tobacco chopper machine - Quality requirements and test methods
Perkakas potong secara umum
SNI 05-1805-1990
8
4 3 10 8 6 11
Cutting tools
Perkakas potong
SNI 8030:2014
5 13
Grinding and polishing machines
SNI 15-2228-1991
25.100
19
Cutting tools in general
Perkakas potong, Tata nama geometri
Cutting tools, Geometric nomenclature
Perkakas putar
42
Turning tools
SNI 05-3340-1994
Pahat bubut dengan mata pisau karbida - Syarat penandaan
Turning tools with carbide tips - Marking requirements
2
SNI 05-3339-1994
Pahat bubut dengan mata pisau karbida -Pahat bubut dalam
Turning tools with carbide tips - Internal tools
3
SNI 05-2273-1991
Perkakas putar dengan tangkai paralel - Diameter tangkai dan ukuran pemutar persegi
Rotating tools with parallel shanks - Diameters of shanks and size of driving squares
8
SNI 05-3341-1994
Pahat bubut dengan mata pisau karbida - Pahat bubut luar
Turning tools with carbide tips - External tools
5
25.100.20
Perkakas fris
Milling tools
SNI 05-2272-1991
Pisau fris dengan pemutar tenon - Ukuran mampu tukar dengan arbor - Seri metrik
Milling cutters with tenon drive - Interchangeability dimensions with cutter arbor - Metric seriess
5
SNI 05-2275-1991
Pisau fris - Seri diameter luar yang direkomendasikan
Milling cutters - Recomended range of outside diameters
8
SNI 05-2680-1992
Pisau kikis putar logam keras (Hardmetal burrs) - Bagian 1: Spesifikasi umum
Hardmetal burrs - Part 1: General specification
6
SNI 05-2276-1991
Pisau fris - Penyayat sisi dengan lubang datar dan pemutar tenon - Seri Metrik
Milling cutters - Shell end mills with plain bore and tenon drive - Metric series
3
SNI 05-2274-1991
Pisau fris - Ukuran mampu tukar untuk arbor atau mandril pisau - Seri metrik dan seri inci
Milling cutters - Interchange ability dimension for cutter arbors or cutter mandrels - Metric series and inch series
25.100.30
Bor, gerek pembenam, bor peluas
18
Drills, countersinks, reamers
SNI 09-4662-1998
Pasak batang engkol sepeda
Crankshaffts of bicycles
9
SNI 05-0792-1989
Bor senter untuk lubang senter berjari-jari tipe R
Center drills for centre hole with radius of R type
2
SNI 05-1208-1989
Gurdi senter
Centre drills for centre holes
12
SNI 05-1209-1989
Tata nama gurdi pilin
Nomenclature of spiral drills
7
25.100.40
Gergaji
Saws
SNI 05-2295-1991
Gergaji sirkular untuk pemotongan logam dengan diameter 224 - 2240 mm
Circular saws for metal cutting, diameter range 224 - 2240 mm
3
SNI 05-2953-1992
Bingkai gergaji besi dengan tangan
Frame of iron hand saws
5
SNI 05-6521.2-2001
Gergaji pisau pita pemotong logam - Bagian 2: Dimensi dan toleransi
Metal cutting band saw blades - Part 2: Dimensions and tolerances
SNI 05-6521.3-2001
Gergaji pisau pita pemotong logam - Bagian 3: Keterkaitan karakteristik masing-masing tipe pisau
Metal cutting band saw blades - Part 3: Characteristics relating to each type
10
SNI 05-0911-1989
Bentuk dan ukuran umum bilah gergaji tangan dan bilah gergaji mesin untuk logam
Shape and general dimensions of hand and machines saw blades for metals
2
25.100.50
Tap dan pemotong berulir
8
Taps and threading dies
SNI 05-2285-1991
Nib untuk penarikan kawat, batang, dan buluh - Ukuran
As - sintered pellets for wire, bar or tube drawing dies
7
SNI 05-2284-1991
Nib untuk dais pembentuk kepala - Ukuran dan toleransi
As - sintered pellets used in heading dies, Dimension and tolerances
5
25.100.60
Kikir
Files
SNI 05-1869-1990
Kikir baja
Steel files
2
SNI 05-0909-1989
Bentuk penampang dan ukuran umum kikir
Cross sections and dimensions of files
8
25.100.70
Bahan asah
Abrasives
SNI 15-3781-1995
Slag abrasive untuk proses blasting
Abrasive slag for blasting process
7
SNI 15-2202-1991
Sabuk pengampelas - Penandaan, Dimensi dan toleransi
Abrasive belts, Designation, Dimension and tolerances
2
SNI 14-4749-1998
Korundum untuk abrasif
Corrundum for abrasives
SNI 15-0928-1989
Kain ampelas lembaran jenis alumina oksida dan jenis silikon karbida
Emery cloth sheet aluminium oxide and silicon carbide type
SNI 15-0916-1989
Roda dan batu gerinda, Penamaan lambang
Grinding wheels and grindstone, Symbols
SNI 15-1149-1989
Roda gerinda, Ukuran dan toleransi
Grinding wheels, Dimensions and tolerances
SNI 15-1150-1989
Ukuran dan toleransi panjang dan lebar ampelas bentuk lembaran dan gulungan
Sizes and tolerances of length and width of emery cloth sheet and roll type
- 76 -
7 10 3 22 2
25.120
Chipless working equipment
Peralatan kerja tanpa bilah
25.120.10
Peralatan tempa. Pemampat. Gunting baja
Forging equipment. Presses. Shears
SNI 05-2302-1991
Pengujian ketelitian untuk bagian-bagian utama dai pres
Press dies sets, Accuracy test
SNI 05-3316-1994
Mesin pres mekanik, Cara uji unjuk kerja dan ketelitian
Mechanical press machines, Test code for performance and accuracy
SNI 05-3305-1994
Punch potong takik
Notching punch
5
SNI 05-3304-1994
Punch potong persegi
Rectangular punches
6
SNI 05-3307-1994
Pelatuk penahan dari press untuk proses pemotongan
Trigger stops for cutting tools used in stamping practice
4
SNI 05-3306-1994
Penendang produk untuk dai press pemotong
Workpiece ejector for cutting tools used in stamping practice
4
SNI 05-2668-1992
Punch potong silindris
Cylindrical punches for press dies
9
SNI 05-3308-1994
Penahan dai press untuk pemotongan
Press working tools stops for cropping
7
SNI 05-2306-1991
Pelat untuk dai pres
Plates for press dies
8
SNI 05-4396-1996
Ukuran nominal pelat bantu untuk alat pres cetakan (moulds) serta perkakas tuntun dan pegang (jig and fixture)
Machine plates for press tools (moulds), jig and fixture - Nominal dimensions
2
SNI 03-0914-1989
Mesin kempa ubin hidrolik, Konstruksi umum, ukuran dan syarat mutu bahan
Hydraulic floor tile pressing machines, General construction, sizes and quality requirements of materials
6
SNI 05-1363-1989
Mesin pres mekanis, Cara uji geometris
Mechanical press machines, Geometric test method
3
SNI 03-0915-1989
Mesin press genteng tipe ulir manual
Manual roof tile pressing machines thread type
25.120.20
Peralatan rol, ekstruding dan tarik
6 33
10
Rolling, extruding and drawing equipment
SNI 05-1195-1989
Mesin tekuk pelat logam, Cara uji ketelitian
Sheet metal folding machines, Test methods for accuracy
8
SNI 05-1194-1989
Mesin rol pelat logam, Cara uji ketelitian
Metal sheet bending roll machines, Accuracy test methods
10
SNI 05-1193-1989
Mesin rol lipat, Cara uji ketelitian
Folding roll machines, Accuracy test methods
25.120.30
Peralatan cetakan
4
Moulding equipment
SNI 05-4387-1996
Balok dudukan untuk cetakan permanen (Die Casting)
Holding blocks for die casting
7
SNI 05-2290-1991
Bos pengarah cetakan dan bos pengarah lokasi berkepala
Mould guide bushes and headed locating guide bushes
3
SNI 05-3799-1995
Pin pengembali untuk cetakan permanen (die casting)
Return pin of dies for die casting
4
SNI 07-1345-1989
Cetakan permanen, Toleransi umum
Die casting, General tolerances
7
25.140
Hand-held tools
Perkakas pegangtangan
25.140.20
Perkakas listrik
SNI IEC 60745-2-2:2015
Electric tools
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-2: Persyaratan khusus untuk obeng dan kunci pas sentak (impacts wrenches) (IEC 60745-2-2:2008, IDT)
Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impacts wrenches
16
Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws
14
Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and drill mashed
14
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanding and polishing in addition to the type of disc
14
Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for grinders, polishers and abrasives types of discs
14
Hand-held motor-operated electric tools - Safety - Part 2-3: Requirements khsusus for grinding, polishing and abrasives types of discs
41
Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drill and drill mashed
34
Motor-operated handheld power tools - Safety - Part 2-11: Particular requirements for reciprocal saws (jig and shielded saws) (IEC 60745-2-11:2003, IDT)
16
Hand-held motor-operated electric tools - Safety - Part 1: General requirements (IEC 60745-1: 2006-04, IDT)
141
IEC 60745-2-2:2008 SNI IEC 60745-2-5:2014
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-5: Persyaratan khusus untuk gergaji bundar
IEC 60745-2-5:2010-07 IDT SNI IEC 60745-2-1:2014
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-1: Persyaratan khusus untuk bor dan bor tumbuk
IEC 60745-2-1:2003 IDT SNI IEC 60745-2-4:2014
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-4: Persyaratan khusus untuk ampelas dan pemoles selain jenis cakram
IEC 60745-2-4:2002 IDT SNI IEC 60745-2-3:2014
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-3: Persyaratan khusus untuk gerinda, pemoles dan ampelas jenis cakram
IEC 60745-2-3:2006 IDT SNI IEC 60745-2-3:2015
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-3: Persyaratan khsusus untuk gerinda, pemoles dan pengampelas jenis cakram (IEC 60745-2-3:2012, IDT)
IEC 60745-2-3:2008 IDT SNI IEC 60745-2-1:2014
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-1: Persyaratan khusus untuk bor dan bor tumbuk (IEC 60745-2-1:2003, IDT)
IEC 60745-2-1:2008 IDT SNI IEC 60745-2-11:2016
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-11: Persyaratan khusus untuk gergaji timbal balik (jig dan gergaji berpelindung) (IEC 60745-2-11:2003, IDT)
IEC 60745-2-11:2003 SNI IEC 60745-1:2015
IDT Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 1: Persyaratan umum (IEC 60745-1: 2006-04, IDT)
IEC 60745-1:2006-04 IDT SNI IEC 60745-2-17:2016
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-17: Persyaratan khusus untuk routers dan trimmers (IEC 60745-2-17:2010, IDT)
IEC 60745-2-17:2010 IDT
- 77 -
Motor-operated handheld power tool - Occupational safety - Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2010, IDT)
35
SNI IEC 60745-2-15:2016
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-15: Persyaratan khusus untuk pemangkas tanaman pagar (IEC 60745-215:2006, IDT)
Motor-operated handheld power tools - Safety - Part 2-15: Particular requirements for hedge trimmers (IEC 60745-2-15:2006, IDT)
27
Motor-operated handheld power tools - Safety - Part 2-14: Particular requirements for the DrawString (planer) (IEC 60745-2-14:2003, IDT)
14
Safety of motor-operated hand-held power tools - Part 2-7: Particular requirements for spray with non-flammable liquids (IEC 60745-2-7:1989, IDT)
13
IEC 60745-2-15:2006 IDT SNI IEC 60745-2-14:2016
Perkakas listrik genggam dioperasikan motor - Keselamatan - Bagian 2-14: Persyaratan khusus untuk serut (planer) (IEC 60745-2-14:2003, IDT)
IEC 60745-2-14:2003 IDT SNI IEC 60745-2-7:2016
Keselamatan perkakas listrik genggam dioperasikan motor - Bagian 2-7: Persyaratan khusus untuk penyemprot dengan cairan tidak mudah terbakar (IEC 60745-2-7: 1989, IDT)
IEC 60745-2-7:1989 IDT
25.140.30
Perkakas yang dioperasikan dengan tangan
Hand-operated tools
SNI 05-2188-1991
Kunci pas ganda mulut lancip
Sharp head double open-end wrenches
SNI 09-2664-1992
Kunci roda untuk kendaraan bermotor
Wheel nuts wrenches for automobiles
SNI 05-2187-1991
Tang kombinasi sumbu geser
Skip joint combination pliers
4
SNI 05-2657-1992
Obeng kombinasi
Screwdrivers (combination)
7
SNI 05-3815-1995
Dimensi dan batas nilai uji tang jepit dan tang kombinasi
Dimension and limit of test value for pinch pliers and combination pliers
9
SNI 05-4073-1996
Tata nama tang
Nomenclature of pliers
SNI 05-4543-1998
Tata nama tang untuk kelistrikan
Nomenclature of pliers for electronics
9
SNI 05-4528-1998
Tang potong ujung
End cutting nippers
8
SNI 05-4524-1998
Cara uji tang jepit dan tang potong
Test methods for pliers and nippers
6
SNI 05-4525-1998
Tang jepit potong dan tang potong dengan tuas
Cutting nippers and level assisted cutting nippers
9
SNI 05-4526-1998
Tang kombinasi biasa dan tang kombinasi lineman
Common combination pliers and lineman's combination pliers
7
SNI 05-4527-1998
Tang kombinasi pekerja bangunan
Combination pliers for construction workers
6
SNI 05-4523-1998
Persyaratan tekhnik umum dari tang potong dan tang kombinasi
General technical requirement of cutting ang combination plier
2
SNI 05-4552-1998
Persyaratan teknik umum tang jepit dan tang potong untuk perlistrikan
General technical reguirement for pliers and nippers for electronics
2
SNI 05-4530-1998
Standar tang sumbu geser dua posisi
Two position ship joint pliers
3
SNI 05-4545-1998
Tang jepit untuk kelistrikan
Nippers for electronics
7
SNI 05-4532-1998
Kunci pipa
Pipe wrenches
4
SNI 05-4553-1998
Tang jepit geser
Multiple step joint pliers
6
SNI 05-4529-1998
Tang kombinasi tukang kayu
Combinations pliers for carpenters
3
SNI 05-0791-1989
Kunci Inggris
Wrenches
SNI 05-0793-1989
Obeng
Screwdriver
SNI 05-0788-1989
Kunci sok tangan dan kunci sok tenaga, kepala pemutar dan kepala penyambung, Persyaratan umum penampang kepala pemutar dan kepala penyambung
Hand socket wrenches and power socket wrenches, General requirements of rotator and fitter heads
8
SNI 05-6704-2002
Kunci kombinasi
Combination wrenches
9
SNI 05-0384-1989
Pahat tangan (betel), Mutu dan cara uji
Hand chisels, Specification and test methods
8
SNI 05-0790-1989
Kunci pas, kunci ring dan kunci sok operasi tangan
Open-end wrenches, box wrenches and manual socket wrenches
7
SNI 05-0910-1989
Kunci pas, kunci ring dan kunci sok ukuran metrik, Toleransi lebar mulut
Metric open-end wrenches, box wrenches, and socket wrenches, Tolerance on head-width
SNI 05-0380-1989
Palu/martil, Mutu dan cara uji
Hammers, Specification and test methods
SNI 05-0381-1989
Kaka tua (catut), Mutu dan cara uji
Pliers, Specification and test methods
2
SNI 05-0789-1989
Kunci pas berkepala bulat dan kunci ring ganda, Kombinasi ukuran
Open end wrenches and double box wrenches, Size combinations
3
SNI 05-0382-1989
Bentuk tang serba guna Mutu dan cara uji
Multipurpose pliers shapes, Specification and test methods
2
25.160
14
5 17
2 12
Welding, brazing and soldering
Pengelasan, penyepuhan dan pematrian
25.160.01
4 13
Pengelasan, penyepuhan, dan pematrian secara umum
Welding, brazing and soldering in general
SNI 07-2932-1992
Simbol las
Welding symbols
SNI 07-3026-1992
Las - Pertimbangan untuk menjamin mutu struktur las
Welding - Factors to be considered to ensure quality in welded structure
3
SNI 07-3027-1992
Las - Faktor-faktor yang harus dipertimbangkan dalam penilaian perusahaan yang menggunakan las sebagai cara utama fabrikasi
Welding - Factors to be considered when assessing firms using welding as a prime means of fabrication
3
SNI 07-3028-1992
Azas posisi las - Definisi dan nilai sudut kemiringan serta notasi untuk berbagai lasan lurus
Fundemental welding positions - Definitions and valves of angles of slope and rotation for straight welds
8
SNI 13-3032-2002
Kualifikasi pengelasan
Welding qualification
25
332
ASME/ANSI Standard B 31.3, 1996 Translation
25.160.10
IDT
Proses pengelasan
Welding processes
SNI 13-4129-1996
Prosedur untuk pengelasan atau hot tapping pada peralatan yang berisi fluida mudah terbakar
Procedures for welding or hot tapping on equipment containing flameable fluids
SNI 07-6405-2000
Tata cara pengelasan pipa baja untuk air di lapangan
Methods for field welding of steel water pipes
SNI 4129:2012
Praktik aman hot tapping di industri minyak bumi dan petrokimia
Safety practice of hot tapping in the petroleum and petrochemical industries
25.160.20
Yang dapat dipakai mengelas
21 9
Welding consumables
SNI 07-4077-1996
Cara uji tarik dan pukul deposit logam lasan
Method of tension and impact test for welded metal deposit
8
SNI 07-3697-1995
Cara uji kekerasan deposit logam las
Hardess test method welding metal deposit
4
SNI 04-6201-2000
Katoda tembaga
Copper cathodes
4
- 78 -
SNI 07-1064-1989
Elektroda grafit untuk dapur busur listrik
Graphite electrodes for electrical arc fura
SNI 07-0049-1987
Elektroda las terbungkus baja karbon rendah, Mutu dan cara uji
Welding electrode covered by low carbon steel, Specification and test method
25.160.30
Peralatan pengelasan
SNI 04-6288.1-2000
9 23
Welding equipment
Persyaratan keselamatan untuk perlengkapan las busur cahaya listrik Bagian 1: Sumber daya las
Safety requirements for arc welding equipment - Part 1: Welding power sources
42
IEC 974-1: 1989, Safety requirements for arc welding equipment - Part 1: Welding power sources Translation
IDT
SNI 7045:2011
Mesin las busur listrik
Electric arc-welding machines
SNI 07-1453-1989
Brander las oksi asetilin bertekanan rendah
Low pressure oxy-acethylene welding torches
25.160.40
Kampuh las
14
Welded joints
SNI 07-3806-1995
Cara uji lengkung untuk sambungan lasan tumpu
Bending test method for butt-welded joints
7
SNI 07-3025-1992
Persyaratan las - Ketentuan umum, persyaratan servis untuk sambungan berlas
Welding requirements - General requirements, service requirements for welded joints
2
SNI 07-3029-1992
Las - Faktor yang dipertimbangkan dalam persyaratan khusus untuk sambungan berlas fusi baja (faktor-faktor teknis yang mempengaruhi)
Welding - Factors to be considered in specifying requirements for fusion weldied joints in steel (technical influencing factors)
4
SNI 07-3807-1995
Cara uji lengkung bolak balik untuk sambungan lasan tumpu
Reverse bend test method for butt-welded joints
4
SNI 07-3696-1995
Cara uji kekerasan pada bahan uji tirus di zona terpengaruh panas hasil pengelasan
Method of taper hardness test in weld heat effected zone
5
SNI 07-3695-1995
Cara uji kekerasan maksimum pada zona terpengaruh panas hasil pengelasan
Test methods of maximum hardness in weld heat effected zone
4
SNI 07-3689-1995
Cara uji keretakan las galur - Y
Method of Y-groove weld cracking test
3
SNI 07-3688-1995
Cara uji keretakan las galur - U
Method of U-groove weld cracking test
3
SNI 07-4076-1996
Cara uji lengkung bebas untuk sambungan lasan tumpu
Method of free bend test for butt welded joint
SNI 18-6936.2-2002
Praktik yang direkomendasi untuk pengujian radiografi sambungan las fusi Bagian 2: Sambungan tumpul las fusi pelat baja tebal lebih 50 mm sampai dengan dan termasuk tebal 200 mm
Recommended practice for radiographic examination of fusion welded joints - Part 1: Fusion welded butt joints in steel ticker than 50 mm and up to and including 200 mm inthickness
6 13
ISO 1106-2-1984, Recommended practice for radiographic examination of fusion welded joints -- Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness Translation SNI 18-6936.1-2002
MOD Praktik yang direkomendasi untuk pengujian radiografi sambungan las fusi Bagian 1: Sambungan tumpul las fusi pelat baja dengan tebal sampai 50 mm
Recommended practice for radiographic examination of fusion welded joints - Part 1: Fusion welded butt joints in stelel plates up to 50 mm thick
16
ISO 1106-1:1985, Recommended practice for radiographic examination of fusion welded joints -- Part 1: Fusion welded butt joints in steel plates up to 50 mm thick Translation SNI 18-6936.3-2002
MOD Praktik yang direkomendasi untuk pengujian radiografi sambungan las fusi Bagian 3: Sambungan melingkar las fusi pipa baja tebal sampai 50 mm
Recommended practice for radiographic examination fusion welded joint - Part 3: Fusion welded ferential jooints in steel pipes of up to 50 mm well thickness
22
ISO 1106-3:1984, Recommended practice for radiographic examination of fusion welded joints -- Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness Translation SNI ISO 10675-2:2010
MOD Uji tak rusak lasan - Tingkat keberterimaan untuk uji radiografi - Bagian 2: Aluminium dan paduannya
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys
ISO 10675-2:2010 Translation SNI ISO 10675-1:2010
IDT Uji tak rusak lasan - Tingkat keberterimaan untuk uji radiografi - Bagian 1: Baja, nikel, titnium dan paduannya
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys
ISO 10675-1:2008 Translation SNI ISO 2400:2014
IDT Uji tak rusak - Uji ultrasonik - Spesifikasi untuk kalibrasi blok No.1 (ISO 2400:2012, IDT)
Nondestructive testing - Ultrasonic testing - Specification for calibration block 1 (ISO 2400: 2012, IDT)
ISO 2400:2012 IDT SNI ISO 17636-2:2015
Uji tak rusak lasan - Uji radiografi - Bagian 2: Teknik sinar gamma dan sinarX dengan detektor digital (ISO 17636-2:2015, IDT)
Nondestructive testing of welds - Radiographic testing - Part 2: Technique gamma rays and X-rays with digital detector (ISO 17636-2: 2015, IDT)
66
ISO 176360-2:2015 IDT
25.160.50
Penyepuhan dan pematrian
SNI 07-0260-1989
25.220
Brazing and soldering
Solder perak, Cara uji
Silver solders, Test method
Surface treatment and coating
Perlakuan permukaan dan pelapisan
SNI 05-2182-1991
25.220.20
25.220.40
Alat ukur kekerasan permukaan metoda profil transformasi bertahap dan seketika tipe sentuh
Perlakuan permukaan
SNI 07-0955-1989
7
Surface-roughness equipment by instan touch type and phases transformation profile methods
5
Surface treatment
Cara uji ketebalan lapisan anodasi
Test method for thickness of anodic coatings
Pelapisan logam
6
Metallic coatings
SNI 07-2198-1991
Pelapisan metalik dan organik lainnya, Definisi dan ketentuan pengukuran ketebalan
Metallic coating and other organic materials, Definition and thickness measurement
3
SNI 07-6443-2000
Metode pengujian untuk menentukan daerah lapisan seng paling tipis dengan cara preece pada besi atau baja yang di galvanis
Test method for locating the thinnest spot in a zinc (galvanized) coating on iron or steel by preece test
7
SNI 07-4614-1998
Pelapisan seng secara proses listrik pada besi atau baja
Electroplated coatings of zinc on iron or steel
8
SNI 07-4615-1998
Pelapisan nikel dan krom secara proses listrik
Electroplated coatings of nickel and chromium
19
SNI 07-7033-2004
Galvanisasi (hot-dip galvanized) pada besi dan baja fabrikasi - Spesifikasi dan metode pengujian
Hot-dip galvanized on fabricated iron and steel - Specifications and test methods
23
ISO 1461, BS EN ISO 1461, ASTM A 123, JIS H 8461, AS/NZS 4680:1999 MOD SNI 07-1353-1989
Proses pelapisan seng celup panas, Petunjuk praktis
Hot-dipped zinc coating process, Code of practice
SNI 07-1870-1990
Petunjuk praktis, proses pelapisan seng secara elektrolitik
Code of practice, for electroplated coating process of zinc
SNI 07-0311-1989
Lapis seng, Cara uji
Zinc coating, Test method
- 79 -
4 8 19
SNI 09-1267-1989
25.220.50
Pelapisan listrik komponen kendaraan bermotor roda empat, Ketentuan umum
Email
Electroplating for motor vehicles components, General rules
4
Enamels
SNI 15-4937.1-1998
Cara uji ketahanan email terhadap benturan
Test method for resistance of enamelled articles
3
SNI 15-4937.2-1998
Cara uji ketahanan email terhadap abrasi
Test method for resistance of enamelled articles to abrassion
3
SNI 15-4969-1999
Cara uji ketahanan email terhadap larutan alkali
Test method for enamel resistance to alkaline solution
4
SNI 07-4411-1997
Cara uji ketebalan lapisan email dengan metoda magnetik
Test method of enamel lining thickness by magnetic method
4
SNI 06-0243-1989
Cara uji ketahanan email terhadap asam-asam lemah pada suhu ruang
Test method of enamel resistance to weak acid at room temperature
6
25.220.60
Pelapisan organik
SNI 06-6096-1999
Organic coatings
Cara uji lengkung lapisan organik
Bending test for organic coatings
- 80 -
11
27
ENERGY AND HEAT TRANSFER ENGINEERING
REKAYASA ENERGI DAN PEMINDAHAN PANAS
27.010
Energy and heat transfer engineering in general
Rekayasa energi dan pemindahan panas secara umum
SNI ISO 50001:2012
Sistem manajemen energi - Persyaratan dengan pedoman penggunaan
Energy management systems - Requirements with guidance for use
ISO 50001:2011, IDT Translation SNI 7985:2015
27.020
IDT Kriteria sumur panas bumi
Criteria for geothermal wells
Internal combustion engines
Mesin pembakaran internal
SNI ISO 8528-1:2009
10
Generator set arus bolak-balik dengan penggerak mesin bakar internal sistem torak bolak-balik - Bagian 1: Penggunaan, Pengenal dan kinerja
Reciprocating internal combustion engine driven alternating current generating sets -- Part 1: Application, ratings and performance
21
ISO 8528-1:2005, Reciprocating internal combustion engine driven alternating current generating sets -- Part 1: Application, ratings and performance Translation SNI 0119:2012
27.040
IDT Motor bakar penyalaan kompresi gerak bolak-balik untuk kegunaan umum Spesifikasi, unjuk kerja dan metode uji
Gas and steam turbines. Steam engines
Mesin bahan bakar dan uap. Mesin uap
SNI 04-6270-2000
Compression ignition internal combustion piston engines of motion back and forth for public use - Specification, performance and test methods
Turbin gas - Pengadaan
Gas turbines - Procurement
60
ISO 3977: 1991, Gas turbines - Procurement Translation SNI 13-6230-2000
IDT Turbin uap penggunaan khusus untuk peralatan industri minyak, kimia dan gas
Special purpose steam turbines for petroleum, chemical, and gas industry services
203
API 611 Translation SNI 04-6269-2000
IDT Petunjuk pemeliharaan dan penggunaan triaril fosfat ester untuk fluida kontrol turbin
Guide for maintance and use of triaryl phosphate ester for turbine control fluids
18
IEC 978 Edisi Pertama 1989, Maintenance and use guide phosphate ester turbine control fluids IDT SNI 7389.3:2009
Aturan uji keberterimaan termal turbin uap - Bagian 3: Uji verifikasi unjukkerja termal turbin uap yang diretrofit
Code of testing for steam turbine thermal compliance - Part 3 : Verification testing of retrofied steam turbine thermal performance
71
SNI IEC 60953-2:2009
Aturan untuk uji keberterimaan termal pada turbin uap - Bagian 2: Metode B, Julat ketelitian lebar untuk berbagai tipe dan ukuran turbin
Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines
112
IEC 60953-2:2009, Rules for steam turbine thermal acceptance tests. Part 2: Method B - Wide range of accuracy for various types and sizes of turbines Translation SNI IEC 60953-1:2009
IDT Aturan untuk uji keberterimaan termal pada turbin uap - Bagian 1: Metode A, Ketelitian tinggi untuk turbin uap kondensasi skala besar
Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines
80
IEC 60953-1:2009, Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condensing steam turbines Translation SNI IEC 62256:2010
IDT Turbin Hidrolik, Pompa Penyimpanan dan Pompa-Turbin - Rehabilitasi dan peningkatan kinerja
Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement
IEC 62256 ed 1.0 (2008-01) Translation SNI IEC 62256:2012
IDT Turbin hidrolik, pompa tandon dan turbin-pompa – Rehabilitasi dan peningkatan kinerja
Hydraulic turbines, storage pumps and pump-turbines – Rehabilitation and performance improvement
IEC 62256: 2008 IDT
IDT
SNI 05-1720-1989
Pemeriksaan dan Pengujian pesawat uap dan pesawat cairan panas
Steam boilers, Inspection and testing
21
SNI 04-1692-1989
Peraturan uji siap guna termal turbin uap
Steam turbine, Thermal acceptance tests
93
27.060 27.060.01
Pembakar dan ketel secara umum
SNI 7185:2009 SNI 7268:2009
27.060.30
Burners. Boilers
Pembakar. Ketel uap
Burners and boilers in general
Analisis kadar fosfat pada air ketel uap
Phosphat content analysis on boiler water
Syarat-syarat air pengisi ketel uap dan air ketel uap
Specification of boiler and boiler water loaded water
Ketel dan penukar panas
Boilers and heat exchangers
SNI 05-4006-1996
Metode pemeriksaan arus pusar untuk tabung non-feromagnetik alat penukar bahang terpasang.
Eddy current examination method for installed nonferromagnetic heat exchanger tubing.
SNI 05-2249-1991
Penukar kalor tubular
Tubular heat exchangers
SNI 05-6055-1999
Metode arus pusar untuk pemeriksaan pipa penukar bahang
Eddy current methods for examination of nonferomagnetic heat exchanger tubing
13
SNI 05-6047.1-1999
Penukar kalor - Metode pengukuran parameter untuk penentuan unjuk kerja. Bagian 1: Suhu dan kualitas fluida
Heat exchanger - Method for parameter measurement for performance determination. Part 1: Temperature and fluid quality
25
SNI 05-6046-1999
Penukar kalor - Definisi unjuk kerja dan prosedur pengujian umum untuk menentukan unjuk kerja penukar kalor
Heat exchanger - Definitions of performance and general test procedure for establishing performance of heat exchanger
31
SNI 05-6047.2-1999
Penukar kalor - Metode pengukuran parameter untuk penentuan unjuk kerja. Bagian 2: Tekanan fluida
Heat exchanger - Method for parameter measurement for performance determination. Part 2: Fluid pressure
21
SNI 05-6047.3-1999
Penukar kalor - Metode pengukuran parameter untuk penentuan unjuk kerja. Bagian 3: Laju aliran fluida
Heat exchanger - Method for parameter measurement for performance determination. Part 3: Fluid flow velocity
29
SNI 05-6702-2002
Persyaratan ketel uap mini
Requirements for small steam boilers
8
SNI 05-1341-1989
Ketel uap dan bejana tekan, Spesifikasi bahan tube baja karbon tanpa kampuh untuk ketel uap dengan tekanan tinggi
Steam boilers and pressure vessels, Specification material of seamless carbon steel tube for high pressure steam boilers
4
SNI 05-1342-1989
Spesifikasi bahan, syarat-syarat umum untuk tube baja karbon, baja paduan feritik dan baja paduan austenitik ketel uap dan bejana tekan
Steam boilers and pressure vessels, Specification for materials, general requirements for carbon steel tubes, ferritic and austenitic alloy steel tubes
19
27.100
289
Power stations in general
Pusat tenaga secara umum
SNI 04-3849.1-1995
8
Instalasi pembangkit listrik pedesaan - Bagian 1: Pusat Listrik Tenaga Diesel
- 81 -
Rural electricity generators - Part 1 : Diesel Electric Power Plant
13
27.120
Nuclear energy engineering
Rekayasa energi nuklir
27.120.01
Energi nuklir secara umum
SNI 18-6939-2002
Nuclear energy in general
Tabung pencacah Geiger-Muller
Geiger-Muller counter tubes
15
Characteristics and test condition of radionuclide imaging devices - Gamma cameras anger type
19
JIS Z 4202-1988 Geiger-Muller counter tubes Translation SNI 18-7105-2005
IDT Karakteristik dan syarat uji alat pencitraan radionuklida - Kamera gamma tipe anger
IEC 60789 edisi 2.0, Characteristics and test condition of radio nucleide imaging devices : Anger type gamma cameras Translation SNI 18-7027-2004
IDT Instrumentasi nuklir - Sistem pencacah sintilasi cair - Verifikasi kinerja
Nuclear instrumentation - Liquid scintillation counting systems - Performance verification
23
IEC 1304: 1994 Translation SNI 18-7104-2005
IDT Instrumentasi nuklir - Dimensi vial untuk pencacahan sintilasi cair
Nuclear instrumentation - Dimensions of vials for liquid scintillation counting
5
IEC 60582: 1977, Dimensions of vials for liquid scintillation counting Translation SNI 18-7106-2005
IDT Kalibrasi dan penggunaan sistem kamar pengion untuk pengujian radionuklida
Calibration and usage of ionization chamber systems for assay of radionuclides
10
IEC 61145: 1992, Calibration and usage of ionization chamber systems for array of radionuclides Translation
27.120.10
IDT
Rekayasa reaktor
Reactor engineering
SNI 18-4149-1996
Kualifikasi personel untuk operasi dan pemeliharaan reaktor nuklir
Personnel qualification for operation and maintenance of nuclear reactor
16
SNI 18-2034-1990
Pedoman penentuan tapak reaktor nuklir
Nuclear reactor site, Guide for determination
20
27.120.20
Pusat tenaga nuklir Keselamatan
Nuclear power plants. Safety
SNI 18-2036-1990
Ketentuan keselamatan kerja radiasi
Occupational safety rules of radiation
SNI 18-2035-1990
Pedoman pembuatan laporan analisis keselamatan
Safety, Guide for writing analisys report
27
SNI 04-6266-2000
Pembangkit listrik tenaga nuklir - Ruang kendali utama - Verifikasi dan perlakuan desain
Nuclear power plants - Main control room - Verification and validation of design
45
113
IEC 61771: 1995, Nuclear power plants - Main control room - Verification and validation of design Translation SNI IEC 60780:2008
IDT Pembangkit listrik tenaga nuklir - Peralatan elektris sistem keselamatan Kualifikasi
Nuclear power plants - Electrical equipment of the safety system (IEC 60780:1998, IDT)
IEC 60780, Nuclear power plants - Electrical equipment of the safety system (Edition 2.0 (1998-10)) Translation SNI ISO 14943:2009
IDT Teknologi bahan bakar nuklir - Kriteria administratif terkait dengan keselamatan kekritisan nuklir
Nuclear fuel technology -- Administrative criteria related to nuclear criticality safety
ISO 14943:2004 Nuclear fuel technology -- Administrative criteria related to nuclear criticality safety Translation SNI 18-7103-2005
IDT Pembangkit listrik tenaga nuklir - Sistem instrumentasi dan kendali yang penting untuk keselamatan - Klasifikasi
Nuclear power plants - Important instrumentation and control system for safety Classification
25
IEC 61226: 1993, Nuclear power plant - Instrument and control system important for safety - Classification Translation SNI ISO 14015:2009
IDT Manajemen lingkungan - Asesmen lingkungan pada Tapak dan Organisasi (EASO)
Environmental management - Environmental Management - Environmental assessment of sites and organizations (EASO)
ISO 14015:2001Environmental management - Environmental Management - Environmental assessment of sites and organizations (EASO) Translation SNI 18-2031-1990
27.140
IDT PLTN, Pedoman penentuan lokasi
Nuclear Electric Power Plant, Guide for determination of location
6
Hydraulic energy engineering
Rekayasa energi hidrolik
SNI 04-3849.2-1995
Instalasi pembangkit listrik pedesaan - Bagian 2: Pusat Listrik Tenaga Microhidro berkapasitas sampai 50 KW (PLTM - P50). Subbagian 2 : Pembuatan, pemasangan dan pengujian
Rural electricity generators - Part 2 : Microhydro Electric Power Plant capacity up to 50 KW. Section 2 : Fabrication, installation and testing
29
SNI 04-3849.2.1-1996
Instalasi pembangkit listrik pedesaan - Bagian 2: Pusat listrik tenaga mikrohidro berkapsitas sampai 50 kW (PLTM-P50)
Rural electricity generators - Part 2: 50 kW capacity microhydro electric power plant
47
SNI 04-6953-2003
Pembangkit listrik hidro skala kecil
Small scale hydraulic electric power stations
33
Cavitation pitting evaluation in hydraulic turbines, storage pumps and pumps - Turbines Part 2: Evaluation in Pelton turbines
17
ASCE / EPRI Guide 1989 Translation SNI 04-1706.2-2004
MOD Evaluasi lubangan kavitasi pada turbin air, pompa tando dan pompa Turbin - Bagian 2: Evaluasi pada turbin pelton
IEC 60609-2: 1997-11 Translation
IDT
SNI IEC 60609-1:2014
Turbin hidrolik, pompa penyimpan dan turbin-pompa - Evaluasi lubang kavitasi - Bagian 1 : Evaluasi pada turbin reaksi, pompa penyimpan dan turbin-pompa (IEC 60609:2004, IDT)
Hydraulic turbines, storage pumps and pump-turbines - Cavitation hole Evaluation - Part 1: Evaluation in reaction turbines, storage pumps and pump-turbines (IEC 60609: 2004, IDT)
SNI IEC 60308:2011
Turbin hidrolik - Pengujian sistem kendali
Hydraulic turbines –Testing of control systems
IEC 60308 ed 2.0 (2005-01) Hydraulic turbines –Testing of control systems Translation SNI IEC 61116:2015
IDT Pedoman perlengkapan elektromekanikal untuk instalasi mini hidro (IEC 61116: 1992, IDT)
Guidelines electromechanical equipment for mini-hydro installations
58
Pressure-sensitive adhesive tape for electrical purposes - Part 3-1: Specifications for individual materials - PVC film tape with pressure sensitive adhesive (IEC 560454-3-1: 2002, IDT)
11
The photovoltaic system is connected to the power grid - Minimum requirements for system documentation, commissioning tests and inspection (IEC 62446:2009, IDT)
27
IEC 61116:1992 IDT SNI IEC 60454-3-1:2015
Pita adhesif peka tekanan untuk keperluan listrik - Bagian 3-1: Spesifikasi untuk bahan individu - Pita film PVC dengan adhesif peka tekanan (IEC 560454-3-1:2002, IDT)
IEC 60454-3-1:2002 IDT SNI IEC 62446:2016
Sistem fotovoltaik terhubung ke jaringan listrik - Persyaratan minimum untuk sistem dokumentasi, uji komisioning dan inspeksi (IEC 62446:2009, IDT)
IEC 62446:2009 IDT
- 82 -
SNI IEC 61362:2016
Pedoman untuk spesifikasi sistem kontrol turbin hidrolik(IEC 61362:2012, IDT)
Guide to specification of hydraulic turbine governing systems (IEC 61362:2012, IDT)
73
IEC 61362:2012 IDT SNI 04-1706-1989
Lubang kavitasi pada turbin air, pompa penyimpanan dan turbin pompa, Evaluasi
Cavitation holes in hydraulic turbine, storage pump and pump turbine, Evaluation
20
SNI 19-6743-2002
Metode pengujian sifat hidraulik akuifer dengan cara theis
Examination methods for aquiver hydraulic propeties by using of Theis code
18
SNI 19-6740-2002
Metode pengujian untuk penentuan transmisivitas akuifer tertekan dengan cara pemulihan Theis
Examination methods for aquiver transmissivity determination by using of Theis recovery
11
SNI 19-6739-2002
Metode pengujian untuk penentuan kapasitas jenis dan penaksiran transmisivitas pada sumur uji
Examination methods for type capacity and transmissivitas estimation on tested wells
10
SNI 19-6744-2002
Tata cara pemilihan metode uji sifat hidraulik akuifer dengan teknik sumur
Procedure for test method selection of aquiver hydraulic properties buy using of well technique
12
SNI 19-6737-2002
Metode perhitungan awal laju sedimentasi waduk
Initial calculation methods for the rate of reservoir sedimentation
15
SNI 05-1067-1989
Turbin air Francis, Cara uji unjuk kerja
Mini hydraulic turbines, Performance test
21
SNI 19-6742-2002
Metode pengujian kolom air di lapangan untuk penentuan sifat-sifat hidraulik akuifer
Examination method for slug on the field for the determination of aquiver hydraulic properties
SNI 04-6915-2002
Petunjuk spesifikasi sistem kendali turbin air
Guide specification of hydraulic turbine control systems
58
Examination method for pressure aquiver transmissivity by using of slug test code
13
7
IEC 61362:1988, Guide to the specification of hydraulic turbine control systems Translation SNI 19-6741-2002
27.160
MOD Metode pengujian untuk penentuan transmisivitas akuifer tertekan dengan cara uji kolom air
Solar energy engineering
Rekayasa energi surya
SNI 04-3850.2-1995
Modul fotovoltaik. Bagian 2 : Pengukuran karakteristik arus tegangan sel/modul fotovoltaik
Photovoltaic moduls. Part 2 : Characteristics measurements of current voltage cells/photovoltaic moduls
13
SNI 04-3021-1992
Pemanas air tenaga surya tipe domestik sistem termosifon langsung dengan pemanas tambahan
Solar energy water heater for domestic use, Direct thermosiphone system with additional heater
29
SNI 04-3850.1-1995
Modul fotovoltaik. Bagian 1: Umum
Photovoltaic moduls. Part 1: General
11
SNI 04-6302-2000
Pengenalan fotovoltaik yang dikopel langsung dengan sistem pompa
Rating of direct coupled photovoltaic with pump systems
3
IEC 1702: 1995, Rating of direct coupled photovoltaic Translation
IDT
SNI 04-6394-2000
Prosedur penentuan klasifikasi sistem pembangkit listrik fotovoltaik individual - Pedoman umum
Procedures for determination of individual photovoltaic electric power generating system classification - General guidance
7
SNI 04-6205.7-2000
Gawai fotovoltaik - Bagian 7: Perhitungan kesalahan yang disebabkan oleh ketidaksesuaian respons spektral pada pengujian suatu gawai fotovoltaik
Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic devices
2
IEC 904-7 : 1995, Photovoltaic devices - Part 7 Computation of spectral mismatch error introduce in the testing of a photovoltaic devices IDT SNI 04-6533-2001
Pengujian ultraviolet modul fotovoltaik
UV tests for photovoltaic (PV) moduls
8
IEC 61345: 1998, UV tests for photovoltaic (PV) moduls Translation SNI 04-6300-2000
IDT Modul fotovoltaik terestrial film-lapisan tipis
Thin-film terrestrial photovoltaic moduls
42
IEC 1646: 1996, Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval Translation SNI 04-6205.9-2000
MOD Gawai fotovoltaik - Bagian 9: Persyaratan unjuk kerja simulator surya
Photovoltaic devices - Part 9: Solar simulator performance requirements
4
Salt mist corrosion testing of photovoltaic modulus
2
Photovoltaic devices - Part 8: Guidance for spectral measurement of spectral response of a photovoltaic device
7
IEC 9049 : 1995, Photovoltaic devices - Part 9 : Solar simulator her/Ormonce requirements Translation SNI 04-6298-2000
IDT Pengujian korosi akibat kabut garam air laut pada modul fotovoltaik
IEC 1701: 1995, Salt mist corrosion testing of photovoltaic (PV) modulus Translation SNI 04-6205.8-2000
MOD Gawai fotovoltaik - Bagian 8: Petunjuk pengukuran respons spektral gawai fotovoltaik
IEC 904-8 : 1995, Guidence for the measurement of spectral response of a photovoltaic (PV) devices. Part 8: Guidences for the measurement of spectral response of a photovoltaic Translation SNI 04-6206-2000
MOD Sistem pembangkit daya fotovoltaik terestrial - Umum dan pedoman
Terrestrial photovoltaic power generating system - General and guide
16
Safety qualification of photovoltaic modules- Part 1: Construction requirements
19
Recommendations for small renewable energy and hybrid systems for rural electrification Part 4: System selection and design
54
IEC 1277: 1995, Terrestrial photovoltaic (PV) power generating systems - General and guide Translation SNI IEC 61730-1:2008
IDT Kualifikasi keselamatan modul fotovoltaik (FV) -bagian 1: Persyaratan konstruksi Safety qualification of photovoltaic modules- Part 1: Construction requirements
IEC 61730-1 : 2004 Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction Translation SNI IEC 62257-4:2009
IDT Rekomensadi untuk sistem energi terbarukan dan dan hibrida skala kecil untuk listrik perdesaan - Bagian 4:Pemilihan dan rancangan system
IEC 62257-4:2009, Recommendations for small renewable energy and hybrid systems for rural electrification - Part 4: System selection and design Translation SNI IEC 62257-1:2009
IDT Rekomendasi untuk sistem energi terbarukan skala kecil dan hibrida untuk listrik pedesaan - Bagian 1: Pengantar umum listrik pedesaan
Recommendations for small renewable energy and hybrid systems for rural electrification Part 1: General introduction to rural electrification
6
IEC 62257-1:2009, Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification Translation SNI IEC 61730-2 : 2008
IDT Kualifikasi keselamatan modul fotovoltaik (FV) -bagian 2: Persyaratan pengujian Safety qualification of photovoltaic modules - Part 2: Requirements for testing
Safety qualification of photovoltaic modules - Part 2: Requirements for testing
36
Crystalline silicon photovoltaic modules - Design qualification and validation types
74
IEC 61730-2 : 2004 Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing IDT SNI IEC 61215:2013
Modul fotovoltaik silikon kristal - Kualifikasi desain dan pengesahan jenis
IEC 61215:2005 IDT
- 83 -
SNI IEC 61194:2013
Parameter karakteristik sistem fotovoltaik yang berdiri sendiri
Characteristic parameters of stand-alone photovoltaic systems
74
IEC 61194:1992 IDT SNI IEC 60364-7-712:2012 Instalasi listrik untuk bangunan-Bagian 7-712: Persyaratan untuk instalasi atau lokasi khusus - Sistem suplai daya fotovoltaik surya (PV)
Electrical installations of buildings - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems
IEC 60364-7-712 ed. 1.0 (2002-05) IDT SNI IEC 60904-1:2011
IDT Gawai Fotovoltaik - Bagian 1 : Pengukuran karakteristik arus-tegangan fotovoltaik
Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
IEC 60904-1 ed 2.0 (2006-09) Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics Translation SNI IEC 60904-7:2011
IDT Gawai Fotovoltaik – Bagian 7: Perhitungan kesalahan ketidaksesuaian spektral pada pengujian gawai fotovoltaik
Photovoltaic Devices – Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device
IEC 60904-7 (1998-03) Photovoltaic Devices – Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device Translation SNI IEC 62124:2016
IDT Sistem fotovoltaik yang berdiri sendiri - Verifikasi desain (IEC 62124:2004, IDT)
Stand-alone photovoltaic systems - Verification of design (IEC 62124:2004, IDT)
40
IEC 62124:2004 IDT
27.180
Wind turbines and other alternative sources of ene
Turbin angin dan sumber energi alternatif lainnya
SNI 04-3851.2-1995
Sistem konversi energi angin. Bagian 2 : Pedoman pendekatan pengukuran kecepatan dan arah angin, perhitungan dasar untuk daya dan energi angin dan turbin angin
Wind energy conversion system. Part 2 : Guide for measurement approach of wind's speed and direction, calculation for power and wind energy and wind turbine
13
SNI 04-3851.1-1995
Sistem konversi energi angin. Bagian 1: Umum
Wind energy conversion system. Part 1 : General
21
SNI 04-6612.3.1-2002
Sistem konversi energi angin - Bagian 3: Sistem pengaman, gawai protektif dan pemantau - Seksi 1: Kontrol dan sistem pengaman
Wind energy conversion systems - Part 3: Safety system, protective and monitoring devices - Section 1: Control and safety systems
18
Germanischer Lloyd:1993, Chapter 2: Safety system protective and monitoring devices" Translation
MOD
SNI 04-6299.7-2000
Regulasi untuk sertifikasi SKEA ( sistem konversi energi angin). Bab 7: Instalasi listrik untuk SKEA
Regulation for certification of ECS (wind energy conservation systems). Chapter 7: Electrical installation for ECS
13
SNI 04-6207-2000
Pedoman konfigurasi sistem hibrida angin - Diesel
Guide for configuration of wind - diesel hybride systems
30
Wind energy conversion systems - Part 2: Safety requirement for control and protection systems, electrical system, installation assembly and erection of wind turbines, commissioning, operation and maintenance
34
American Wind Energy Association (AWEA) 10.1-1991 Wind/diesel system architecture guide book Translation SNI 04-6612.2-2001
IDT Sistem konversi energi angin (SKEA) - Bagian 2: Persyaratan keselamatan untuk sistem kontrol dan proteksi, sistem listrik, instalasi, perakitan dan pendirian (erection) turbin angin, komisioning, operasi dan pemeliharaan
IEC 1400-2: 1994, Wind energy conversion system - Part 2: Safety requirement for control and protection systems, electrical system, installation assembly and erection of wind turbines, commissioning, operation and maintenance Translation SNI 04-6612.1-2001
IDT Sistem konversi energi angin (SKEA) - Bagian 1: Persyaratan keselamatan untuk rancangan struktur SKEA
Wind energy conversion systems - Part 1: Safety requirements for structural design of wind energy conversion systems
41
IEC 1400-1: 1994, Wind energy conversion systems - Part 1: Safety requirements for structural design of wind energy conversion systems Translation SNI IEC 61400-2:2016
IDT Turbin angin - Bagian 2: Persyaratan rancangan turbin angin skala kecil (IEC 61400-2:2006, IDT)
Wind turbines - Part 2: Requirements for the design of small-scale wind turbines (IEC 61400-2:2006, IDT)
94
IEC 61400-2:2006 IDT SNI IEC 61400-12-1:2016
Turbin angin - Bagian 12-1: Pengukuran kinerja daya listrik yang dihasilkan oleh turbin angin (IEC 61400-12-1:2005, IDT)
Wind turbines - Part 12-1: Measuring the performance of the electric power generated by wind turbines (IEC 61400-12-1:2005, IDT)
105
Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines (IEC 61400-21:2008, IDT)
63
IEC 61400-12-1:2005 IDT SNI IEC 61400-21:2016
Turbin angin - Bagian 21: Pengukuran dan penilaian karakteristik kualitas daya dari turbin angin yang terkoneksi grid (IEC 61400-21:2008, IDT)
IEC 61400-21:2008 IDT
27.190
Biological sources and alternative sources of energy
Sumber biologi dan sumber alternatif energi
SNI 13-7122-2005
Prosedur pelaksanaan dan pelaporan penyelidikan panas bumi - Tahap penyelidikan rinci
Implementing and reporting procedures of geothermal surveys - Detail survey phases
20
SNI 13-7123-2005
Kriteria peralatan uji alir fluida sumur panas bumi
The criteria of fluid flow test equipment for geothermal wells
28
SNI 13-6605-2001
Metode uji alir fluida sumur panas bumi
Test methods for fluid flow geothermal wells
48
SNI 13-6987-2004
Fluida sumur panas bumi - Prosedur uji alir
Geothermal well fluid - Flow test procedures
16
SNI 13-6983-2004
Prosedur pelaksanaan dan pelaporan dalam penyelidikan pendahuluan dan penyelidikan pendahuluan lanjutan panas bumi
Implementing and reporting procedures of geothermal preliminary and continuation preliminary investigations
15
SNI 7826:2012
Unit penghasil biogas dengan tangki pencerna (digester) tipe kubah tetap dari beton
Generating unit with tank digester biogas fixed dome type of concrete
SNI 8017:2014
Minyak nabati tersterilifikasi parsial untuk bahan bakar motor diesel putaran sedang
Partially sterilificated vegetable oil for diesel motors fuel with medium rotation
SNI 8019:2014
Standar mutu biogas bertekanan tinggi
Quality standard of high pressure biogas
SNI 8018:2014
Minyak nabati untuk bahan bakar pembakaran luar (external combustion)
Vegetable oil for external combustion fuel
SNI 7970.1:2014
Penentuan kadar biodiesel (EMAL/FAME) dalam campurannya dengan minyak solar - Bagian 1: Metode spektrometri inframerah pertengahan
Determination of levels of biodiesel (EMAL / FAME) in mixtures with diesel oil - Part 1: Method of mid-infrared spectrometry
SNI 7969:2014
Penentuan kadar bioetanol dalam gasohol - Metode ekstraksi dengan air
Determination of ethanol in gasohol - Methods of extraction with water
SNI 7927:2013
Peralatan jaringan unit biogas
Network equipment unit of biogas
15
SNI 7182:2015
Biodiesel
Biodisesel
98
SNI 7431:2015
Mutu dan metode uji minyak nabati murni untuk bahan bakar motor diesel putaran sedang
Quality and testing methods of pure vegetable oil to fuel diesel engine rotation being
51
SNI 13-6677-2002
Pelaporan uji alir fluida sumur panas bumi
Reporting of geothermal wells fluid flow test
21
- 84 -
11
SNI 19-6678-2002
27.200
Konversi energi listrik dalam uji alir fluida sumur panas bumi
Electrical energy conversion in fluid flow testing for geothermal wells
21
Refrigerating technology
Teknologi pendingin
SNI 05-2999-1992
Menara pendingin air - Cara uji
Water cooling tower - Test method
29
SNI 05-3058-1992
Sistem pendingin, Simbol
Refrigerating system, Symbols
20
SNI 05-3262-1994
Lemari pendingin komersial jenis raih, Persyaratan umum
Reach in commercial refrigerators, General requirement
SNI 05-3060-1992
Sambungan jenis flare dan jenis brazing untuk refrijeran
Flare type and brazing type fittings for refrigerant
23
SNI 05-3057-1992
Pengujian sistem refrijerasi
Testing of refrigerating system
39
SNI 04-3010-1992
Ruang pendingin kostruksi panel
Panel construction cold strorage
SNI 05-3056-1992
Unit pendingin dengan media air
water media cooking units
31
SNI 05-3055-1992
Kompresor refrijeran, Pengujian
Refrigerant compressor testing
44
SNI 05-3059-1992
Pengamanan sistem refrijerasi
Safety of refrigerating system
34
SNI 05-3011-1992
Refrijerasi - Tata nama
Refrigerators - Nomenclature
4
SNI 05-3261-1994
Lemari pendingin jenis komersial, Cara uji
Commercial refrigerators, Test method
23
SNI 05-3000-1992
Menara pendingin air - Rancangan termal dan fungsional
Water cooling tower - Thermal and functional design
84
SNI 05-3001-1992
Menara pendingin air - Rancangan pra-pabrikasi di pabrik
Water cooling tower - Pre manufacturing design in manufacture
25
SNI 05-2998-1992
Menara pendingin air - Tata nama
Water cooling tower - Nomenclature
21
SNI 05-3096-1992
Unit pendingin, Metode uji untuk transportasi mekanis
Refrigeration units, Test method for mechanical transport
17
SNI 05-3088-1992
Lemari pendingin komersial jenis raih, Persyaratan khusus
Reach in commercial refrigerators, Particular requirements
27.220
9
6
1
Heat recovery. Thermal insulation
Takal panas Penyekat panas
SNI 10-4832-1998
Isolasi kebakaran untuk sekat dan geladak kapal barang
Fire insulation for partition and decks of freighters
SNI 10-4833-1998
Isolasi kebakaran untuk sekat dan geladak kapal penumpang
Fire insulation for partition and decks of passanger ships
- 85 -
8 10
29 29.020
ELECTRICAL ENGINEERING
REKAYASA LISTRIK
Electrical engineering in general
Rekayasa listrik secara umum
SNI 04-4187-1996
Pengujian keandalan perlengkapan. Bagian 1 : Persyaratan umum
Test method for reliability of apparatus. Part 1 : General requirement
SNI 04-6301-2000
Standar listrik perdesaan - Pedoman umum
Rural electrification standards - General guidelines
3
SNI 04-1922-2002
Frekuensi standar
Standard frequency
4
38
IEC 60196:1965, IEC Standards frequencies Translation SNI 04-0227-2003
MOD Tegangan standar
Standard voltages
11
Effect of current passing through the human body. Part 2: Special aspects. Chapter 4: Effect of alternating current with frequencies above 100 Hz
23
IEC 38: 1983; , Standard voltages, Amandemen 1: 1994-08 dan Amandemen 2: 1997-10 Translation SNI 04-6283.2.4-2000
IDT Pengaruh arus yang melalui tubuh manusia. Bagian 2: Aspek khusus. Bab 4: Pengaruh arus bolak-balik dengan frekuensi di atas 100 Hz
IEC 479-2: 1987, Effects of current passing through the human body - Part 2: Special aspects Translation SNI IEC 62561-4:2012
IDT Komponen sistem proteksi petir (KSPP) - Bagian 4: Persyaratan untuk penjepit konduktor
Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners
IEC 62561-4 ed1.0 (2010-11) IDT SNI IEC 60059:2009
IDT Standar Arus Pengenal
IEC standard current ratings
4
IEC 60059:2009, IEC standard current ratings Translation SNI IEC 62305-2:2009
IDT Proteksi terhadap petir - Bagian 2: Manajemen resiko
Protection against lightning - Part 2: Risk management
112
IEC 62305- 2 Translation SNI 04-7044.1.1-2004
IDT Radas listrik untuk penggunaan di tempat berdebu yang dapat terbakar Bagian 1 - 1: Radas listrik yang diproteksi dengan selungkup dan pembatasan suhu permukaan - Ketentuan untuk radas
Electrical apparatus protected by enclosures and surface temperature limitation Specification for apparatus
35
IEC 61241-1-1: 1996-06 Translation SNI IEC 60204-1:2009
IDT Keselamatan Mesin - Perlengkapan Listrik dari Mesin - Bagian 1: Persyaratan Umum
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
107
IEC 60204-1:2009, Safety of machinery - Electrical equipment of machines - Part 1: General requirements Translation SNI IEC 61140:2012
IDT Proteksi terhadap kejut listrik- Aspek umum untuk instalasi dan perlengkapan
Protection against electric shock - Common aspects for installation and equipment
IEC 61140:2009 IDT SNI IEC 60038:2013
IDT Tegangan standar IEC
IEC standard voltages
14
IEC 60038:2009 Translation
IDT
SNI IEC 60364-7-710:2012 Instalasi listrik voltase rendah-Bagian 7-710: Persyaratan untuk instalasi atau lokasi khusus - Lokasi medis
Electrical installations of buildings - Part 7-710: Requirements for special installations or locations - Medical locations
IEC 60364-7-710 Ed. 1.0 (2002-11) IDT
IDT
SNI IEC 60364-7-711:2012 Instalasi listrik dalam bangunan-Bagian 7-711: Persyaratan untuk instalasi atau lokasi khusus - Pameran, pertunjukan dan stan
Electrical installations of buildings - Part 7-711: Requirements for special installations or locations - Exhibitions, shows and stands
IEC 60364-7-711 Ed. 1.0 (1998-03) IDT SNI IEC 62305-1:2013
IDT Proteksi terhadap petir - Bagian 1: Prinsip umum
Protection against lightning - Part 1: General principles
70
Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals, conductor terminations and conductors
19
IEC 62305-1:2010 Translation SNI IEC 60445:2013
IDT Prinsip dasar dan keselamatan untuk antarmuka manusia-mesin, penandaan dan identifikasi - Identifikasi terminal perlengkapan, terminasi konduktor dan konduktor
IEC 60445:2010 Translation SNI IEC 61140:2011
IDT Proteksi terhadap kejutan listrik-Aspek umum untuk instalasi dan peralatan
Protection against electric shock - Common aspects for installation and equipment
IEC 61140 Ed. 3.1 + Amd. 1 (2009-09) Coversheet
IDT
SNI IEC 60529:2014
Tingkat proteksi yang diberikan oleh selungkup (Kode IP) (IEC 60529:2001, IDT)
The level of protection provided by enclosures (IP code) (IEC 60529: 2001, IDT)
SNI IEC 60446:2011
Prinsip dasar dan keselamatan untuk antarmuka manusia dan mesin, penandaan dan identifikasi-Identifikasi dengan warna atau huruf angka
Basic and safety principles for man-machine interface, marking and identification Identification of conductors by colours or alphanumerics
IEC 60446 Ed. 4 (2007-05) Translation SNI IEC/TR 62510:2015
IDT Menstandarkan karakteristik listrik (IEC/TR 62510:2008, IDT)
Standardize the electrical characteristics
15
IEC/TR 62510:2008 IDT SNI IEC 60059:2015
Peringkat arus standar (IEC 60059:2009, IDT)
Standard current ratings
7
Standard frequency
7
IEC 60059:2009 IDT SNI IEC 60196:2015
Frekuensi standar (IEC 60196:2009, IDT)
IEC 60196:2009 IDT SNI IEC 62561-1:2016
Komponen sistem proteksi petir - Bagian 1: Persyaratan untuk komponen koneksi (IEC 62561-1:2012, IDT)
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
IEC 62561-1:2012 IDT SNI 04-1924-1990
Frekuensi standar untuk instalasi jaringan kendali terpusat
Standard frequency for installation network
- 86 -
3
SNI 04-1923-1990
Arus pengenal standar
Standard current ratings
3
SNI 04-1472-1989
Persyaratan umum pengujian pengawatan listrik pada mesin peralatan pabrik
Electrical wiring of industrial machinery, General requirement for test
3
SNI 04-1707-1989
Listrik pedesaan
Rural electricity
29.035
Insulating materials
Bahan isolasi
29.035.01
13
Bahan isolasi secara umum
Insulating materials in general
SNI 04-6194.1-1999
Pedoman untuk penentuan sifat ketahanan termal bahan isolasi listrik. Bagian 1: Pedoman umum pada prosedur penuaan dan evaluasi hasil pengujian
Guidelines for determination of thermal endurance properties of electrical insulating materials. Part 1: General guidelines for ageing procedures and evaluation of test results
27
SNI 04-6190.1.4-2001
Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 1: Metode untuk penerapan umum - Seksi 4: Pengujian pada suhu rendah
Common test methods for insulating and sheathing materials of electrical cables - Part 1: Methods for general applications - Section 4: Tests at low temperature
19
IEC 60811-1-4: 1985, Common test methods for insulating and sheathing materials of electrical cables - Part 1: Methods for general applications - Section 4: Tests at low temperatures Translation SNI 04-6190.5.1-2001
IDT Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 5: Metode spesifik untuk kompon pengisi - Seksi 1: Titik tetes - Separasi minyak - Kerapuhan pada suhu rendah - Jumlah total asam
Common test methods for insulating and sheathing materials of electric cables - Part 5: Methods specific to filling compound - Section 1: Drop point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components Permitivity at 23C - D.C. resistivity at 23C and 100C
18
IEC 60811-5-1: 1990, Common test methods for insulating and sheathing materials of electric cables - Part 5: Methods specific to filling compound - Section 1: Drop point Translation SNI 04-6190.1.1-2001
IDT Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 1: Metode untuk penerapan umum - Seksi 1: Pengukuran tebal dan dimensi keseluruhan - Pengujian untuk menentukan sifat mekanis
Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determination of mechanical characteristics
22
IEC 60811-1-1: 1993, Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 1: Measurement of thickness and overall dimensions - Tests for determination of mechanical properties Translation
IDT
SNI 04-4521.3-1998
Spesifikasi isolasi dengan bahan dasar mika - Bagian 3: Spesifikasi untuk bahan individu - Lembar 2: Kertas mika
Specification of insulators with mica based materials - Part 3: Specification for individual material - Sheet 2: Mica papers
SNI 04-6544-2001
Metode pengambilan contoh dielektrik cair
Methods of sampling liquid dielectrics
19
Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrink
13
9
IEC 475: 1974, Methods of sampling liquid dielectrics Translation SNI 04-6190.1.3-2001
IDT Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 1: Metode untuk penerapan umum - Seksi 3: Metode untuk menentukan kerapatan massa. Uji penyerapan air - Uji pengerutan
IEC 60811-1-3: 1993, Common test methods for insulating and sheating materilas of electric cables - Part 1: Methods for general applications - Section 3: Methods for determining the density - Water absorption tests - Shrinkage tests Translation SNI 04-6190.1.2-2001
IDT Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 1: Metode untuk penerapan umum - Seksi 2: Metode penuaan termal
Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods
19
IEC 60811-1-2: 1985 + Amendment 1: 1989, Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section 2: Thermal ageing methods Translation SNI 04-6542-2001
IDT Pengukuran permitivitas relatif, faktor disipasi dielektrik dan restivitas a.s. cairan isolasi
Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid
16
IEC 247: 1978, Measuremert of relative permitivity, dielectric dissipation factor and d.c. resistivity of insulating liquid Translation SNI IEC 60216-4-1:2009
IDT Bahan insulasi listrik - sifat ketahaan termal - Bagian 4-1 : Oven penuaan oven berbilik tunggal
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens Single-chamber ovens
13
IEC 60216-4-1:2009, Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens Translation SNI 04-0857-1989
29.035.10
IDT Bahan isolasi untuk mesin dan peralatan listrik, Klasifikasi
Insulation materials for electrical machinery and apparatus, Classification
Bahan isolasi kertas dan karton
SNI 04-6624.1-2001
8
Paper and board insulating materials
Spesifikasi kertas selulosa untuk penggunaan dalam kelistrikan - Bagian 1: Definisi dan persyaratan umum
Specification for cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
8
IEC 60554-1: 1977, Specification for cellulosic papers for electrical purposes - Part 1: Definitions and general requirements Translation SNI 04-6624.2-2002
MOD Spesifikasi kertas selulosa untuk penggunaan dalam kelistrikan - Bagian 2: Metode uji
Specification for cellulosic papers for electrical purposes - Part 2: Test methods
31
IEC 60554-2:1977, Cellulosic papers for electrical purposes - Part 2: Methods of test Translation
29.035.20
MOD
Bahan isolasi plastik dan karet
Plastics and rubber insulating materials
SNI 04-3050-1992
Kompon PVC untuk kawat berisolasi dan kabel listrik bertegangan pengenal sampai dengan 30 kV
PVC Coumpound for electrical insulated wire and cable rated voltage up to 30 kV
8
SNI 04-2697-1992
Bahan XPLE untuk isolasi kabel listrik tegangan pengenal 1 kV sampai dengan 30 kV
XLPE materials for electric cable insulators rated voltage 1 kV up to 30 kV
3
SNI 04-6190.4.2-2001
Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 4: Metode spesifik untuk kompon polietilen dan polipropilen - Seksi 2: Pemulihan saat putus setelah pra kondisi - Uji belitan set
Common test methods for insulating and sheating materials of electrical cables - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Elongation to break after pre-conditioning - Wrapping test after pre-conditioning Wrapping test after thermal ageing in air - Measurement of mass increase - Long term stability tests (Appendix A) - Test methods for copper catalysed oxidative degradation (Appendix B)
17
IEC 60811-4-2: 1990, Common test methods for insulating and sheating materials of electrical cables - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Elongation to break after pre-conditioning Translation SNI 04-6190.3.1-2001
IDT Metode uji umum untuk bahan isolasi dan selubung kabel listrik - Bagian 3: Metode spesifik kompon PVC - Seksi 1: Pengujian tekanan pada suhu tinggi - Pengujian untuk ketahanan terhadap retakan
Common test methods for insulating and sheathing materials of electrical cables - Part 3: Methods specific to PVC compound - Section 1: Pressure test at high temperature - Test for resistance to cracking
17
IEC 60811-3-1: 1985, Common test methods for insulating and sheathing materials of electrical cables - Part 3: Methods specific to PVC compound - Section 1: Pressure test at high temperature - Test for resistance to cracking Translation SNI 04-6190.3.2-2000
IDT Metode uji umum untuk bahan isolasi dan bahan selubung kabel listrik Bagian 3: Metode khusus untuk kompon PVC - Seksi 2: Uji penyusutan massa - Uji stabilitas termal
IEC 811-3-2 : 1985, Common test methods for insulating and sheathing materials of electric cables Translation
IDT
- 87 -
Common test methods for insulating and sheathing materials of electric cables - Part 3: Method specific to PVC compound - Section 2: Lost of mass test - Thermal stability tests
10
SNI 04-6190.4-1999
Metode umum pengujian bahan isolasi dan selubung pada kabel listrik. Bagian 4: Metode khusus untuk komponen polietilena dan polipropilena. Seksi satu: Ketahanan putus kabel - Pengujian belitan set
Common test methods for insulating and sheating materials of electric cables. Part 4: Specific methods to polypropylene compounds. Section one: Resistance to environmental stress cracking - Wrappin
16
SNI 04-6190.2-1999
Metode umum pengujian bahan isolasi dan selubung pada kabel listrik. Bagian 2: Metode khusus kompon elastomer. Seksi satu: Metode pengujian ketahanan ozon - Pengujian panas berbeban - Pengujian peren
Common test methods for insulating and sheathing materials of electric cables. Part 2: Methods specific to elastomeric compounds - Section one: Ozone resistance test methods - Hot set test - Mineral o
13
SNI 04-1713-1994
Persyaratan kompon PVC untuk isolasi dan selubung kabel listrik
PVC compound for electric cable insulators and sheaths, Requirement
14
SNI 04-1712-1989
Persyaratan kompon karet untuk isolasi dan selubung kabel listrik
Rubber compound for electric cable insulators and sheaths, Requirement
20
29.035.30
Bahan isolasi gelas dan keramik
SNI 04-6531-2001
Glass and ceramic insulating materials
Isolator berbahan keramik atau gelas untuk saluran udara dengan tegangan nominal di atas 1000 V - Uji tembus
Insulators of ceramic materials or glass for overhead lines with a nominal voltage greater than 1000 V - Puncture testing
27
IEC 1211: 1994, Insulators of ceramic materials or glass for overhead lines with a nominal voltage greater than 1000 V - Puncture testing Translation
IDT
SNI 04-6127-1999
Felspar untuk pembuatan isolator keramik tegangan menengah dan tinggi
Feldspars for middle and high voltage ceramic insulators
SNI 04-6970.3-2003
Keramik dan material isolasi gelas - Bagian 3: Spesifikasi untuk material individu
Ceramic and glass-insulating materials - Part 3: Specification for individual materials
3 13
IEC 60672-3: 1997-10, Ceramic and glass-insulating materials - Part 3 : Specification for individual materials Translation
29.040
IDT
Insulating fluids
Cairan isolasi
29.040.01
Isolasi bahan basah pada umumnya
SNI 04-6276-2000
Insulating fluids in general
Penentuan air dalam cairan isolasi secara titrasi Karl Fischer Coulometer
Determination of water in insulating liquid by automatic coulometric Karl Fischer titration
12
Insulating liquids - Determination of the breakdown voltage at power frequency - Test methods
12
IEC 814: 1985, Determination of water in insulating liquid by automatic coulometric Karl Fischer titration Translation SNI 04-7068-2005
IDT Insulasi cair - Penentuan tegangan tembus pada frekuensi daya - Metode uji
IEC 156: 1995-02 Translation
29.040.10
MOD
Isolasi bahan minyak
SNI 04-3591.1-2000
Insulating oils
Spesifikasi minyak isolasi mineral baru untuk kabel dengan selubung minyak
Specification for new insulating mineral oils for cables with oil ducts
6
IEC 60465: 1988, Specification for unused insulating mineral oils for cables with oil ducts Translation
IDT
SNI 04-3867-1995
Metode untuk menentukan tegangan tembus minyak isolasi
Method for determination of permeability strength of insulating oils
5
SNI 04-3591-1994
Spesifikasi minyak isolasi mineral baru untuk transformator dan perangkat hubung bagi
New mineral insulator oil, for transformers and switchgear and controlgear
9
29.040.20
Isolasi bahan gas
SNI 04-3580-1994
29.045
Insulating gases
Persyaratan penghantar tembaga dan aluminium untuk isolasi kabel listrik
12
Semi-conducting materials
Bahan semikonduktor
SNI IEC 60747-2:2009
Requirements of copper and alumunium conductor for electric cable insulation
Piranti semi konduktor - Piranti diskrit dan sirkit terintegrasi - Bagian 2 : Dioda perata arus
Semiconductor devices - Discrete devices and integrated circuits - Part 2: Rectifier diodes
26
IEC 60747-2 Edition 2.0 (2000-03) Semiconductor devices - Discrete devices and integrated circuits - Part 2: Rectifier diodes Translation
29.050
IDT
Conducting materials
Bahan penghantar
SNI 04-3894-1995
Konduktor tembaga telanjang jenis keras (BCCH)
Bare copper conductor hard (BCCH)
15
SNI 04-3558-1994
Konduktor aluminium campuran (AAAC)
All aluminium alloy conductor (AAAC)
16
SNI 04-3895-1995
Konductor tembaga telanjang jenis setengah keras (BCC 1/2 H)
Bare copper conductor half hard (BCC 1/2 H)
15
SNI 04-3557-1994
Konduktor aluminium murni (AAC)
All aluminium conductors (AAC)
17
SNI 04-6922-2002
Penghantar aluminium paduan tahan panas berpenguat inti kawat baja berlapis aluminium (TACSR/AS)
Heat resistance aluminium alloy conductor with aluminium layer steel wire core strengthener
17
SNI 04-0205-1987
Konduktor aluminium berpenguatan baja
Steel supported aluminium conductors
14
SNI 04-1061-1989
Batang kawat aluminium melulu untuk bahan penghantar listrik
All alluminium wire rod for electrical conductor
29.060
Electrical wires and cables
Kawat dan kabel listrik
SNI IEC 60245-8:2012
Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 8: Kabel senur untuk penerapan yang mensyaratkan fleksibilitas tinggi
Rubber insulated cables - Rated voltages up to and including 450/750 V Part 8: Cords for applications requiring high flexibility
IEC 60245-8: 1994 IDT SNI IEC 60245-3:2012
IDT Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 3: Kabel berinsulasi silikon tahan panas
Rubber insulated cables - Rated voltages up to and including 450/750 V – Part 3: Heat resistant silicone insulated cables
IEC 60245-3: 1994 IDT SNI IEC 60245-4:2012
IDT Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 4: Kabel fleksibel dan kabel senur
Rubber insulated cables - Rated voltages up to and including 450/750 V – Part 4: Cords and flexible cables
IEC 60245-4: 1994 IDT SNI IEC 60245-5:2012
IDT Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 5: Kabel lift
Rubber insulated cables - Rated voltages up to and including 450/750 V – Part 5: Lift Cables
IEC 60245-5: 1994 IDT SNI IEC 60245-6:2012
IDT Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 6: Kabel elektrode las busur
Rubber insulated cables - Rated voltages up to and including 450/750 V – Part 6: Arc welding electrode cables
IEC 60245-6: 1994 IDT
IDT
- 88 -
6
SNI IEC 60245-7:2012
Kabel berinsulasi karet - voltase pengenal sampai dengan 450/750 V Bagian 7: Kabel berinsulasi karet etilen vinil asetat tahan panas
Rubber insulated cables - Rated voltages up to and including 450/750 V – Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC 60245-7: 1994 IDT
29.060.10
IDT
Kawat
Wires
SNI 04-3891-1995
Alat penyambung kawat (las dop)
Wire fitter
SNI 04-3896-1995
Kawat tembaga email poliuretan (UEW)
Polyurethane enamel copper wire (UEW)
21
SNI 04-3897-1995
Kawat tembaga email polivinil formal (PVF)
Polyvinyl enamel formal (PVF) copper wire
18
SNI 04-3236-1992
Kawat fleksibel berisolasi PVC tegangan nominal 1000 V (NYAF)
PVC insulated flexible wire nominal voltage 1000 V (NYAF)
5
SNI 04-3579-1994
Kawat tembaga lunak penampang bulat email polyurethane (UEW)
Enamel polyurethane round profile soft copper wine (UEW)
20
SNI 04-3898-1995
Kawat tembaga lunak penampang bulat email polyester (PEW)
Polyester enamel round profile copper wire (PEW)
22
SNI 04-3578-1994
Kawat tembaga lunak penampang bulat email polyvinyl formal (PVF)
Soft polyvinyl enamel formal (PVF) round profile copper wire
20
SNI 04-3899-1995
Kawat tembaga lunak penampang bulat untuk kumparan (MA)
Soft round profile copper wire for coil
14
SNI 04-6272-2000
Rekomendasi untuk kawat konduktor listrik aluminium anil komersil
Recommendation for commercial annealed aluminium electrical conductor wire
3
9
7
IEC 121: 1960, Recommendation for commercial annealed aluminium electrical conductor wire Translation
IDT
SNI 04-6195-1999
Kawat baja lapis aluminium pilin (As-wire)
Twisted aluminium clad steel wires
SNI 04-2698-1999
Kawat berisolasi PVC, tegangan pengenal 450/750 Volt (NYA)
PVC insulated wires, 450/750 volt (NYA) recognation voltages
SNI IEC 60104:2009
Kawat paduan alumunium-magnesium-silikon untuk konduktor saluran udara
Aluminium-magnesium-silicon alloy wire for overhead line conductors
12 6
IEC 60104:2009, Aluminium-magnesium-silicon alloy wire for overhead line conductors Translation
IDT
SNI 04-1711-1989
Kawat tembaga lunak penampang bulat email polyester imide (EIW)
Enamel polyester imide round profile soft copper wire (EIW)
SNI 04-0109-1989
Batang kawat tembaga untuk bahan penghantar listrik
Copper wire bars for electrical conductor materials
SNI 04-1710-1989
Kawat tembaga penampang bulat email oleo-resinous (EW)
Oleo-resinous enamel (EW) round profile copper wire
30
SNI 04-1714-1989
Kawat kumparan. Bagian 1 : Kawat email berpenampang bulat, Metode uji
Coil wire, Part 1 round profile enamel wire, Test method
61
SNI 04-1912-1990
Cara pengujian kawat email penampang segi empat
Rectangular profile enamel wire, Test method
12
SNI 04-1179-1989
Kawat baja pipih lapis seng pelindung kabel listrik
Zinc flat steel wire shielded electric cables
SNI 04-1911-1990
Metode uji kawat kumparan
Coil wire, Test method
29.060.20
Kabel
30 6
4 23
Cables
SNI 04-3239-1992
Kabel udara berisolasi dan berselubung PVC berpenunjang kawat baja dipilin dengan tegangan nominal 500 V
PVC insulated and sheathed, overhead cables, supported by twisted steel wire, nominal voltage 500 V
8
SNI 04-3237-1992
Kabel fleksibel kembar dua dan kembar tiga berisolasi PVC untuk tegangan kerja sampai dengan 380 V (NYY/NYD)
PVC insulated twin and triples flexible cables, for rated voltage up to 380 V (NYY/NYD)
5
SNI 04-3238-1992
Kabel fleksibel kembar dua sampai dengan kembar lima berisolasi, berselubung PVC tegangan nominal 380 V (NYIFY)
PVC insulated and sheathed twin up to quintupletsflexible cables, nominal voltage 380 V (NYIFY)
7
SNI 04-3234-1992
Kabel fleksibel berisolasi dan berselubung PVC tegangan nominal 500 V (NYMHY)
PVC insulated and sheathed flexible cables 500 V nominal voltage (NYMHY)
6
SNI 04-3893-1995
Metode pengujian kabel listrik
Test methods for electric cables
SNI 04-2700-1999
Kabel tanah berisolasi dan berselubung PVC berperisai kawat baja atau aluminium 0,6/1 kV (NYFGbY/NAYFGbY/NYRGbY/NYRY/NAYRY)
PVC insulated and sheathed, steel or aluminium wire shielded ground cables rated voltage 0,6/1 kV (NYFGbY/NAYFGbY/NYRGbY/NYRY/NAYRY)
SNI 04-3235-1992
Kabel fleksibel berisolasi dan berselubung PVC tegangan nominal 500 V (NYMHY Oval)
PVC insulated and sheathed flexible cables 500 V nominal voltage (NYMHY Oval)
SNI 04-2701-1999
Kabel tanah berisolasi dan berselubung PVC tegangan pengenal 0,6/1 kV (NYY/NAYY)
PVC insulated and sheathed ground cables, rated voltage 0,6/1 kv (NYY/NAYY)
28
SNI 04-2699-1999
Kabel berisolasi dan berselubung PVC tegangan pengenal 300/500 volt (NYM)
PVC insulated and sheated cables, rated voltage 300/500 volt (NYM)
14
SNI 04-6273-2000
Petunjuk pemilihan kabel tegangan tinggi
Guide to selection of high-voltage cables
131 44 6
7
IEC 183: 1985, Guide to selection of high-voltage cables Translation SNI 04-6271-2000
IDT Metode uji kabel listrik berisolasi diekstrusi untuk tegangan pengenal di atas 30 kV (Um=36 kV) sampai dengan 150 kV (Um=170 kV)
Test methods for power cables with extruded insulation for rated voltage above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV)
31
IEC 840: 1988, Test methods for power cables with extruded insulation for rated voltages above 30 kV (Um=36 kV) up to 150 kV (Um=170 kV) Translation
IDT
SNI 04-6122-1999
Kabel tanah berisolasi dan berselubung PVC berperisai kawat baja atau aluminium tegangan pengenal 0,6/1 kV (NYBY/NAYBY)
PVC insulated and sheathed, steel or aluminium wire shielded ground cables rated voltage 0,6/1 kV (NYBY/NAYBY)
SNI 04-6951.2-2003
Metode uji listrik untuk kabel listrik - Bagian 2: Uji luahan parsial
Electrical test methods for electrical cables - Part 2: Partial discharge tests
28 9
IEC 885-2: 1987, Electrical test methods for electrical cables, Part 2 : Partial discharge tests Translation SNI 04-6951.3-2003
MOD Metode uji listrik untuk kabel listrik - Bagian 3: Metode uji untuk pengukuran luahan parsial pada panjang kabel tegangan terekstraksi
Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurement on lengths extruded power cables
37
IEC 60885-3: 1988, Electrical test methods for electric cables - Part 3 : Test methods for partial discharge measurements on lengths extruded poer cable Translation SNI 04-6629.2-2006
MOD Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 2: Metode uji
PVC insulated cables with a rated voltage up to 450/750 V - Part 2: Test methods
IEC 60227-2: 2003-04 Translation
IDT
SNI 04-7183.2-2006
Kabel daya dengan insulasi ekstrusi dan lengkapannya untuk tegangan pengenal dari 1 kV (Um=1,2 kV) sampai dengan 30 kV (Um=36 kV) - Bagian 2: Kabel untuk tegangan pengenal 6 kV (Um=7,2 kV) sampai dengan 30 kV (Um=36 kV)
Extrusion insulated power cables and appliances for a rated voltage from 1 kV (Um=1,2 kV) up to 30 kV (Um=36 kV) - Part 2: Cables for a rated voltage 6 kV (Um=7,2 kV) up to 30 kV (Um=36 kV)
81
SNI 04-7183.1-2006
Kabel daya dengan insulasi ekstrusi dan lengkapannnya untuk tegangan pengenal dari 1 kV (Um=1,2 kV) sampai dengan 30 kV (Um=36 kV) - Bagian 1: Kabel untuk tegangan pengenal 1 kV (Um=1,2 kV) sampai dengan 3 kV (Um=3,6 kV)
Extrusion insulated power cables and appliances for a rated voltage from 1 kV (Um=1,2 kV) up to 30 kV (Um=36 kV) - Part 1: Cables for a rated voltage 1 kV (Um=1,2 kV) up to 3 kV (Um=3,6 kV)
61
- 89 -
SNI 04-6629.3-2006
Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 3: Kabel nirselubung untuk perkawatan magun
PVC insulated cables with a rated voltage up to 450/750 V - Part 3: Non-sheated cables for fixed wiring
IEC 60227-3: 1997-11 Translation SNI 04-6951.1-2003
IDT Metode uji listrik untuk kabel listrik - Bagian 1: Uji listrik untuk kabel, kabel senur dan kawat berinsulasi dengan tegangan sampai dengan 450/750 V
Electrical test methods for electric cables - Part 1: Electrical tests for cables, cords and insulated wires for voltages up to 450/750 V
8
IEC 885-1: 1987 Translation SNI 04-6629.4-2006
IDT Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 4: Kabel berselubung untuk perkawatan magun
PVC insulated cables with a rated voltage up to 450/750 V - Part 4: Sheated cables for fixed wiring
IEC 60227-4: 1997-12 Translation SNI IEC 60502-1:2009
IDT Kabel daya dengan insulasi terektrusi dan lengkapannya untuk voltase pengenal dari 1 kV (Um = 1,2 kV) sampai dengan 30kV (Um = 36 kV) Bagian 1: Kabel untuk voltase pengenal 1 kV (Um = 1,2 kV) dan 3 kV (Um = 3,6 kV)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
51
IEC 60502-1:2009, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) Translation SNI 04-6629.6-2006
IDT Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 6: Kabel lift dan kabel untuk hubungan fleksibel
PVC insulated cables with a rated voltage up to 450/750 V - Part 6: Lift cables and cables for flexible connections
IEC 60227-6: 2001-06 Translation SNI 04-6629.7-2006
IDT Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 7: Kabel fleksibel berskrin dan niskrin dengan dua konduktor atau lebih
PVC insulated cables with a rated voltage up to 450/750 V - Part 7: Screened and unscreened flexible cables with two or more conductors
IEC 60227-7: 2003-04 Translation SNI IEC 60245-2:2010
IDT Kabel Berinsulasi Karet - Voltase Pengenal sampai dengan 450/750 V Bagian 2: Metode uji
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC 60245-2 ED 2.2 Consol. With amd 1 & 2 (1998-03) Translation SNI IEC 60228:2009
IDT Konduktor dari kabel berinsulasi
Conductors of insulated cables
15
IEC 60228:2009, Conductors of insulated cables Translation SNI 04-6629.5-2006
IDT Kabel berinsulasi PVC dengan tegangan pengenal sampai dengan 450/750 V - Bagian 5: Kabel fleksibel
PVC insulated cables with a rated voltage up to 450/750 V - Part 5: Flexible cables
IEC 60227-5: 2003-07 Translation SNI IEC 60502-2:2009
IDT Kabel daya dengan insulasi terekstruksi dan lengkapnya untuk voltase pengenal dari 1 kV (Um = 1,2 kV) sampai dengan 30 kV (Um = 36 kV) Bagian 2: Kabel untuk voltase pengenal 6 kV (Um = 7,2 kV) sampai dengan 30 kV (Um = 36 kV)
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
76
IEC 60502-2:2009, Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV) Translation SNI IEC 60245-1:2011
IDT Kabel berinsulasi karet – voltase pengenal sampai dengan 450/750 V, Bagian 1 : Persyaratan umum
Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 1 : General requirements
IEC 60245-1 Ed. 4.1 (2008-01) Translation SNI IEC 60245-5:2012
IDT Kabel berinsulasi karet - Voltase pengenal sampai dengan 450/750 V Bagian 5: Kabel lift (IEC 60245-5:1994, IDT)
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
17
IEC 60245-5:1994 IDT SNI 6629.1:2011
Kabel berinsulasi PVC dengan voltase pengenal sampai dengan 450/750 V – Bagian 1: Persyaratan umum
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V – Part 1: General requirements
IEC 60227-1 (2007) Translation SNI IEC 62440:2013
IDT Kabel listrik dengan voltase pengenal tidak melebihi 450/750 V - Pedoman penggunaan
Electric cables with a rated voltage not exceeding 450/750 V - Guidelines for the use of
IEC 62440:2008 IDT SNI IEC 60245-8:2016
Kabel berinsulasi karet - Voltase pengenal sampai dengan 450/750 V Bagian 8: Kabel senur untuk penerapan yang membutuhkan fleksibilitas tinggi (IEC 60245-8:2012, IDT)
Rubber insulated cables - rated voltage up to 450/750 V - Part 8: cords for applications requiring high flexibility (IEC 60245-8:2012, IDT)
14
Rubber insulated cables – Rated voltages up to and including 450/750 V – Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables (IEC 60245-7:1994 + Amd 1:1997, IDT)
20
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables (IEC 60245-6:1994 + Amd1:1997 + Amd2:2003, IDT)
16
IEC 60245-8:2012 IDT SNI IEC 60245-7:2012
Kabel berinsulasi karet - Voltase pengenal sampai dengan 450/750 V Bagian 7: Kabel berinsulasi karet etilena vinil asetat tahan panas (IEC 60245-7:1994 + Amd 1:1997, IDT)
IEC 60245-7:1994 + Amd 1:1997 IDT SNI IEC 60245-6:2012
Kabel berinsulasi karet - Voltase pengenal sampai dengan 450/750 V Bagian 6: Kabel elektrode las busur listrik (IEC 60245-6:1994 + Amd1:1997 + Amd2:2003, IDT)
IEC 60245-6:1994 + Amd1:1997 + Amd2:2003 IDT SNI 04-1910-1990
Kabel elektronik: Bagian 1: Kabel berisolasi PVC tegangan pengenal 600 V suhu pengenal 105 C (NYAF-R6/105). Bag.2: tegangan pengenal 1000 V suhu pengenal 90 C (NYAF-R10/90). Bag.3: tegangan pengenal 300
Electronic cables: Part 1: PVC insulated cables rated voltage 600 V rated temperature 105 C (NYAF-R 6/105). Part 2: rated voltage 1000 V rated temperature 90 C (NYAF-R10/90). Part 3: rated voltage 300
17
SNI 04-6923-2002
Pedoman batas suhu hubung-singkat kabel listrik dengan tegangan pengenal tidak melebihi 0,6/1 kV
Guide to the short-circuit temperature limits of electric cables with a rated voltages not exceeding 0,6/1 kV
15
IEC 60724:1984, Guide to the short-circuit temperature limits of electric cables with a rated voltage not exceeding 0,6/1 kV Translation SNI 04-1916-1990
MOD Lengkapan kabel dengan tegangan pengenal U sampai dengan 30 kV: Bagian 3: Sambungan kabel dengand tegangan pengenal Uo/U = 0,6/1 kV
- 90 -
Cables accessories rated voltage U up to 30 kV: Part 3: Cable joint rated voltage Uo/U = 0,6/1 kV
20
SNI 04-1908-1990
Perisai kabel listrik: Bagian 1 : Umum Bag. 2 : Kawat baja pipih lapis seng Bag. 3 : Kawat baja bulat lapis seng Bag. 4 : Pita baja lapis seng Bag. 5 : Perisai kabel listrik aluminium, tembaga, baja
Electrical cable armour: Part 1: General, Part 2: Zinc coated flat steel wire Part 3: Zinc coated round profil steel wire, Part 4: Zinc coated steel ribbon, Part 5: Aluminium, copper, steel, electrical
11
SNI 04-1907-1990
Kabel berisolasi XLPE dan berselubung PVC, tegangan pengenal di atas 1 kV s.d. 30 kV
XLPE insulated and PVC sheathed cables, rated voltage over 1 kV up to 30 kV
49
SNI 04-1917-1990
Lengkapan kabel dengan tegangan pengenal U sampai dengan 30 kV: Bagian 4: Terminasi kabel untuk pasangan dalam dengan tegangan pengenal Uo/U di atas 0,6/1 kV
Cables accessories rated voltage U up to 30 kV: Part 4: Cable termination for indoor rated voltage Uo/U over 0,6/1 kV
30
SNI 04-1906-1990
Kabel pilin udara tegangan pengenal 0,6/1 kV (NFA2X-T/NFA2X/NF2X/NFY)
Overhead line winding cables, rated voltage 0,6/1 kV (NFA2X-T/NFA2X/NF2X/NFY)
14
SNI 04-1914-1990
Lengkapan kabel dengan tegangan pengenal U sampai dengan 30 kV: Bagian 1: Umum
Cables accessories rated voltage U up to 30 kV: Part 1: General
25
SNI 04-1915-1990
Lengkapan kabel dengan tegangan pengenal U sampai dengan 30 kV: Bagian 2: Sambungan kabel tegangan pengenal Uo/U di atas 0,6/1 kV
Cables accessories rated voltage U up to 30 kV: Part 2: Cable joint rated voltage Uo/U over 0,6/1 kV
19
SNI 04-0854-1989
Kabel berisolasi XLPE dan berselubung PVC dengan perisai pita baja atau kawat baja, Tegangan nominal 8,7/15 kV
XLPE insulated, PVC seathed, steel ribbon or steel wire-shielded cables, rated voltage 8,7/15 kV
12
SNI 07-1600-1989
Pita baja lapis seng untuk pelindung kabel listrik
Zinc coated steel strip for electrical cable protection
SNI 04-1709-1989
Kabel lampu gantung berisolasi karet
Rubber insulated cable for hanging lamp
20
SNI 04-0850-1989
Kabel susun jamak (multiplek) dengan penghantar aluminium berisolasi PE, tegangan nominal 0,6/1 kV
Multiplex cables with PE insulated aluminium conductors, nominal voltage 0,6/1 kV
14
SNI 04-0855-1989
Kabel berisolasi XLPE dan berselubung PVC dengan perisai pita baja atau kawat baja, tegangan nominal 18/30 kV
XLPE insulated, PVC seathed, steel ribbon or steel wire shielded cables, rated voltage 18/30 kV
13
SNI 04-0736-1989
Kabel berisolasi XLPE dan berselubung PVC atau PE dengan perisai pipa logam bergelombang tegangan nominal 0,6/1 kV
XLPE insulated, PVC or PE sheathed, corrugated metal pipe shielded cables, nominal voltage 0,6/1 kV
19
SNI 04-0737-1989
Kabel berisolasi XLPE dan berselubung PVC dengan perisai pita baja atau kawat baja, tegangan nominal 12/20 kV
XLPE insulated, PVC sheathed, steel ribbon or steel wire shielded cables, nominal voltage 12/20 kV
11
SNI 04-0851-1989
Kabel susun jamak (multiplek) dengan penghantar aluminium berisolasi XLPE, tegangan nominal 0,6/1 kV
Multiplex cables with XLPE insulated aluminium conductors, nominal voltage 0,6/1 kV
14
SNI 04-1708-1989
Kabel pemanas berisolasi karet
Rubber insulated heater cable
20
SNI 04-0852-1989
Kabel berisolasi dan berselubung PVC dengan perisai kawat baja pipih, tegangan nominal 3,5/6 kV (NYBYGbY, NAYFGbY)
PVC insulated and sheathed, flat steel wire shielded cables, rated voltage 3,5/6 kV (NYBYGbY, NAYFGbY)
SNI 04-1918-1990
Lengkapan kabel dengan tegangan pengenal U sampai dengan 30 kV: Bagian 5: Terminasi kabel untuk pasangan luar dengan tegangan pengenal Uo/U di atas 0,6/1 kV
Cables accessories rated voltage U up to 30 kV: Part 5: Cable termination for outdoor rated voltage Uo/U over 0,6/1 kV
29
SNI 04-0853-1989
Kabel berisolasi XLPE dan berselubung PVC dengan perisai pita baja,tegangan nominal 6/10 kV
XLPE insulated, PVC sheathed, steel ribbon shielded cables, nominal voltage 6/10 kV
12
29.080
8
Insulation
Isolasi
SNI IEC 62217:2012
3
Insulator polimer untuk pemakaian dalam ruang dan luar ruang dengan voltase nominal > 1000 V – Definisi umum, metode uji dan kriteria penerimaan
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V – General definitions, test methods and acceptance criteria
IEC 62217: 2005 IDT
29.080.01
IDT
Isolasi listrik secara umum
SNI 04-6955.1-2003
Electrical insulation in general
Koordinasi insulasi untuk perlengkapan pada sistem tegangan rendah Bagian 1: Prinsip, persyaratan dan pengujian
Insulation coordination for equipment within low voltage system - Part 1: Principles, requirements and tests
73
IEC 60664-1:2000, Insulation coordination for equipment within low-voltage systems - Part 1 : Principles, requirements and tests Translation SNI IEC 61936-1:2009
IDT Instalasi listrik tegangan bolak-balik diatas 1 kV a.b. - Bagian 1: Aturan Umum
Power installations exceeding 1 kV a.c. - Part 1: Common rules
54
IEC 61936-1:2009, Power installations exceeding 1 kV a.c. - Part 1: Common rules Translation
29.080.10
IDT
Isolator
Insulators
SNI 04-3583-1994
Uji tegangan impuls hubung pada isolator tegangan tinggi
Connect impulse voltage test for high voltage insulator
SNI 04-3852.2-1998
Isolator untuk saluran udara dengan tegangan nominal di atas 1000 Volt. Bagian 2 : Renteng isolator dan set isolator untuk sistem arus bolak-balik. Definisi, metode uji dan kriteria serah terima
Insulators for overhead lines with a nomina voltage quater than 1000 Volt. Part 2 : String insulator unit for alternating-current system. Definition, test method and criteria for acceptance
10
SNI 04-3856-1995
Uji cemar buatan untuk isolator tegangan tinggi yang akan dipakai pada sistem tegangan arus bolak-balik
Artificial pollution test for high voltage insulators to be used on alternating current systems
19
SNI 04-3852-1995
Isolator keramik atau gelas untuk saluran udara bertegangan nominal lebih dari 1000 Volt, Aturan pengambilan contoh dan kriteria penerimaan jika metode kendali statistik diterapkan untuk uji mekanis
Ceramic or glass insulators for overhead lines with nominal voltage greater than 1000 Volt, Sampling rules and acceptance criteria when applying statistical control methods for mechanical testing
15
SNI 04-6627-2001
Insulator untuk saluran udara dengan tegangan nominal di atas 1000 V Insulator keramik untuk sistem arus bolak-balik (a.b.b.) - Karakteristik untuk insulator jenis batang panjang
Insulator for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristic of insulator units of the long road type
9
9
IEC 60433: 1998, Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic insulators for a.c. systems - Characteristics of insulator units of the long rod type Translation SNI 04-6541-2001
IDT Pengujian dan dimensi isolator arus searah tegangan tinggi
Test and dimensions for high-voltage d.c. insulators
4
IEC 438: 1973, Tests and dimensions for high-voltage d.c. insulators Translation SNI 04-6540-2001
IDT Pengujian pada isolator buluh yang dipergunakan dalam perlengkapan listrik
Test on hollow insulators for use in electrical equipment
16
Pin insulators for overhead lines. Part 1: Medium voltage 20 kV
12
IEC 60233: 1974, Tests on hollow insulators for use in electrical equipment Translation SNI 04-6296.1-2000
IDT Isolator pin untuk saluran udara. Bagian 1: Tegangan menengah 20 kV
ANSI C 29-6: 1984, for wet process porcelain insulators - high voltage pin type Translation
IDT
SNI 04-4980-1999
Cara uji ketebalan dan berat lapisan seng pada "cap" isolator keramik dengan metode basah
Test method for thickness and weight of zinc coated on ceramic insulator caps by wet method
SNI 04-6295-2000
Isolator keramik buluh tertekan untuk perangkat hubung bagi dan kontrol tegangan tinggi
Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
IEC 1264: 1994, Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear Translation
IDT
- 91 -
6 20
SNI 04-6263-2000
Dimensi kopling klevis dan lidah unit isolator rentang
Dimension of clevis and tongue couplings of string insulators
7
IEC 471-01: 1977, Dimension of clevis and tongue couplings of string insulators Translation SNI IEC 61211:2009
IDT Insulator bahan keramik atau gelas untuk saluran udara dengan tegangan nominal lebih besar dari 1000 volt - Pengujian dadal impuls di udara
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air
12
IEC 61211:2009, Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air Translation SNI 04-7022.1-2005
IDT Insulator untuk saluran udara dengan tegangan nominal di atas 1000 V Bagian 1: Unit insulator keramik atau gelas untuk sistem arus bolak-balik (a.b.) - Definisi, metode uji dan kriteria penerimaan
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria
52
IEC 60383-1: 1993-04, Insulator for overhead lines with a nominal voltage above 1000 V - Part 1 : Ceramic or glass insulator units for a.c. systems - Definition, test methods and acceptance criteria Translation SNI 04-6971-2003
MOD Insulator untuk saluran udara dengan tegangan nominal di atas 1000 V Unit insulator keramik atau gelas untuk sistem arus bolak-balik Karakteristik unit insulator jenis kap dan pin
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin types
8
IEC 60305: 1995-12, Insulator for overhead lines with a nominal voltage above 100V - Ceramic or glass insulators for insulator units for a.c. systems - Characteristics of insulator units of the cap and pin type Translation SNI 04-7022.2-2004
MOD Insulator untuk saluran udara dengan tegangan nominal di atas 1000 Volt Bagian 2: Rentengan insulator dan set insulator untuk sistem arus bolakbalik (a.b.) - Definisi, metode uji dan kriteria penerimaan
Insulators for overhead lines with a nominal voltage above 1000 Volt - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria
13
Characteristics of lines post insulators
13
IEC 60383-2: 1993-04 Translation SNI 04-3869-2003
MOD Karakteristik insulator tonggak saluran
IEC 60720: 1981-01, Characteristis of line post insulators Translation SNI IEC 60168:2011
IDT Pengujian insulator tonggak pasangan dalam dan luar berbahan keramik atau gelas untuk tegangan nominal sistem lebih besar dari 1000 V
Test on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V
IEC 60168 Ed.4.2 (2001-04) Translation SNI IEC 60273:2011
IDT Karakteristik insulator tonggak pasangan dalam dan pasangan luar untuk sistem voltase nominal lebih dari 1000 V
Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
IEC 60273 Ed.3 (1990-02) Translation SNI IEC/TS 60815-3:2015
IDT Pemilihan dan penetapan dimensi insulator tegangan tinggi yang digunakan pada kondisi terpolusi - Bagian 3: Insulator polimer untuk sistem a.b (IEC/TS 60815-3:2008, IDT)
Selection and determination of the dimensions of the high-voltage insulators used in polluted conditions - Part 3: polymer insulators for ac systems
22
Artificial pollution test on ceramic and glass insulators used on high-voltage alternating current systems (IEC 60507:2013, IDT)
41
High voltage polymer insulators for indoor and outdoor - Common definitions, test methods and acceptance criteria (IEC 62217:2012, IDT)
29
IEC/TS 60815-3:2008 IDT SNI IEC 60507:2016
Uji polusi buatan pada insulator keramik dan gelas tegangan tinggi yang digunakan pada sistem arus bolak balik (IEC 60507:2013, IDT)
IEC 60507:2013 IDT SNI IEC 62217:2016
Insulator polimer tegangan tinggi untuk pasangan dalam dan luar - definisi umum, metode pengujian dan kriteria keberterimaan (IEC 62217:2012, IDT)
IEC 62217:2012 IDT SNI 04-0529-1989
Isolator keramik tegangan rendah jenis rol(R), Mutu dan cara uji
Low voltage ceramic insulators, roll type (R), Specification and test method
SNI 04-1700-1989
Unit isolator rentang jenis kap dan pin, Karakteristik
String insulator units, cap and pin type, Characteristic
SNI 04-0921-1989
Isolator keramik tegangan rendah, Kuat tembus listrik massa badan
Low voltage ceramic insulators, Body mass electrical permeability
13
SNI 04-0683-1989
Isolator keramik tegangan rendah, Kuat lentur dan kuat pukul massa badan
Low voltage ceramic insulators, Body mass bending and impact strength
11
SNI 04-0530-1989
Isolator keramik tegangan rendah jenis penutup tiang (bentuk T), Mutu dan cara uji
Low voltage ceramic insulators, pole covered type (T shape), Specification and test method
7
SNI 04-1146-1989
Isolator keramik tegangan menengah jenis post
Medium - voltage ceramic insulator, post type.
9
SNI 04-0682-1989
Isolator keramik tumpu tegangan menengah jenis pin
Medium - voltage supported ceramic insulators, pin type
SNI 04-0352-1989
Isolator keramik jenis pin penegang dan penarik, Mutu dan cara uji
Ceramic insulators, straining pin type, Specification and test method
SNI 04-1699-1989
Isolator keramik tegangan rendah jenis pin, penegang dan penarik, Karakteristik
Low voltage ceramic insulators, straining pin type, Characteristics
6
SNI 04-0577-1989
Isolator keramik tegangan rendah jenis penutup tiang (bentuk sungkup), Mutu dan cara uji
Low voltage ceramic insulators, pole covered type (bell shape), Specification and test method
6
SNI 04-0574-1989
Badan isolator keramik tegangan rendah, Kuat tekan dan kuat tarik
Low voltage ceramic insulator body, Compression and tensile strength.
6
SNI 04-1575-1989
Isolator keramik tegangan rendah jenis bispatrun
Low voltage ceramic insulators, bus pattern type
6
SNI 04-0681-1989
Isolator keramik gantung tegangan menengah jenis bola dan kopling sendi
Medium voltage hang ceramic insulators, ball type and joint coupling
29.080.20
Paking
SNI 04-6264-2000
8 6
8 23
12
Bushings Busing berisolasi untuk tegangan arus bolak-balik di atas 1000 V
Insulated bushing for alternating voltages above 1000 V
IEC 137: 1995, Insulated bushing for alternating voltages above 1000 V Translation SNI IEC 60137:2009
IDT Busing Penginsulasi untuk tegangan bolak-balik diatas 1000 v
Insulated bushings for alternating voltages above 1 000 V
IEC 60137:2009, Insulated bushings for alternating voltages above 1 000 V Translation
IDT
SNI IEC/TS 60815-2:2014
Pemilihan dan penetapan dimensi insulator tegangan tinggi yang digunakan pada kondisi polusi - Bagian 2: Insulator keramik dan gelas untuk sistem a.b (IEC/TS 60815-2:2008, IDT)
Selection and determination of the dimension of the high-voltage insulators are used in pollution conditions - Part 2: Insulator ceramic and glass for ac systems (IEC / TS 60815-2: 2008, IDT)
SNI IEC 60050-195:2014
Kosakata elektroteknik internasional - Bagian 195: Pembumian dan proteksi terhadap kejut listrik (IEC 60050-195:1998, IDT)
International Electrotechnical Commission (IEC) 60050-195, Ed.1.0, (1998-08) ―International Electrotechnical Vocabulary – Part 195: Earthing and protection against electric shock.
IEC 60050-195:1998 IDT
IDT
- 92 -
46
29.080.30
Sistem isolasi
SNI 04-6532.3-2001
Insulation systems
Koordinasi isolasi untuk perlengkapan pada sistem tegangan rendah Bagian 3: Penggunaan lapisan untuk mencapai koordinasi rakitan papan sirkit cetak
Insulation coordination for equipment within low voltage systems - Part 3: Use of coatings to achieve insulation coordination of printed board assemblies
22
IEC 60664-3: 1992, Insulation coordination for equipment within low voltage systems - Part 3: Use of coatings to achieve insulation coordination of printed board assemblies Translation SNI IEC 60071-2:2009
IDT Koordinasi insulasi - Bagian 2: Pedoman penerapan
Insulation co-ordination - Part 2: Application guide
100
IEC 60071-2:2009, Insulation co-ordination - Part 2: Application guide Translation
29.100
IDT
Components for electrical equipment
Komponen untuk peralatan listrik
29.100.01
Komponen untuk peralatan listrik secara umum
SNI 04-6284.1-2002
Components for electrical equipment in general
Perlengkapan listrik medik - Bagian 1: Persyaratan untuk keselamatan. Seksi 1 : Umum
Medical electrical equipment - Part 1: General requirements for safety - Section 1: General
201
IEC 60601-1: 1988, Medical electrical equipment - Part 1: General requirements for safety Translation
29.120
MOD
Electrical accessories
Lengkapan listrik
29.120.01
Lengkapan listrik secara umum
Electrical accessories in general
SNI 04-6611-2001
Lengkapan jaringan tegangan rendah listrik pedesaan
Accessories of low-voltage networks for rural electrification
26
SNI 04-6610-2001
Lengkapan jaringan tegangan menengah untuk listrik pedesaan
Accessories of middle voltage network for rural electrification
16
29.120.10
Pipa saluran untuk keperluan listrik
SNI IEC 60670-22:2012
Conduits for electrical purposes
Kotak dan selungkup untuk lengkapan listrik pada instalasi listrik magun rumah tangga dan sejenis - Bagian 22: Persyaratan khusus untuk kotak dan selungkup hubung
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures
IEC 60670-22 ed1.0 (2003-05) IDT
IDT
SNI IEC 60670-23:2012
Kotak dan selungkup untuk lengkapan listrik pada instalasi listrik magun rumah tangga dan sejenis - Bagian 23: Persyaratan khusus untuk kotak dan selungkup lantai
Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 23: Particular requirements for floor boxes and enclosures
IEC 60670-23 ed1.0 (2006-04) IDT SNI IEC 61386-1:2012
IDT Sistem konduit untuk manajemen kabel - Bagian 1: Persyaratan umum
Conduit systems for cable management - Part 1: General requirements
IEC 61386-1 ed2.0 (2008-02) IDT
IDT
SNI IEC 61386-22:2012
Sistem konduit untuk manajemen kabel - Bagian 22: Persyaratan khusus Sistem konduit semifleksibel
Conduit Systems for cable management - Part 22: Particular requirements - Pliable conduit systems
IEC 61386-22 ed1.0 (2002-02) IDT
IDT
SNI IEC 61386-23:2012
Sistem konduit untuk manajemen kabel - Bagian 23: Persyaratan khusus Sistem konduit fleksibel
Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems
IEC 61386-23 ed1.0 (2002-02) IDT
IDT
SNI IEC 61386-24:2012
Sistem konduit untuk manajemen kabel - Bagian 24: Persyaratan khusus Sistem konduit dipendam dalam tanah
Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground
IEC 61386-24 ed1.0 (2004-07) IDT
IDT
SNI IEC 60423:2010
Sistem Konduit Untuk Manajemen Kabel - Diameter luar konduit untuk instalasi listrik dan ulir untuk konduit dan fiting
Conduit systems for cable management - Outside diameters of conduits for electrical installations and threads for conduits and fittings
IEC 60423 ED 3.0 (2007-08) Translation SNI IEC 61386-21:2012
IDT Sistem konduit untuk manajemen kabel - Bagian 21: Persyaratan khusus Sistem konduit kaku
Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems
IEC 61386-21 ed1.0 (2002-02) IDT
IDT
SNI IEC 60670-24:2015
Kotak dan selungkup untuk lengkapan listrik pada instalasi listrik magun untuk rumah tangga dan sejenis – Bagian 24: Persyaratan khusus untuk selungkup untuk mewadahi gawai proteksi dan perlengkapan listrik lainnya yang mendisipasi daya (IEC 60670-24:2011, IDT)
Boxes and enclosures for electrical accessories on fixed electrical installations for household and similar - Part 24: Particular requirements for enclosures to accommodate the protective devices and other electrical equipment that dissipate
36
Boxes and enclosures for electrical accessories on fixed electrical installations for household and similar - Part 1: General requirements
69
IEC 60670-24:2011 IDT SNI IEC 60670-1:2015
Kotak dan selungkup untuk lengkapan listrik pada instalasi listrik magun untuk rumah tangga dan sejenis - Bagian 1: Persyaratan umum (IEC 606701:2011, IDT)
IEC 60670-1:2011 SNI 04-1703-1989
IDT Pipa untuk instalasi listrik, Spesifikasi khusus untuk pipa logam
Pipe for electrical installation, Specific requirement for metal pipe
25
SNI 04-1702-1989
Pipa untuk instalasi listrik, Spesifikasi khusus untuk pipa isolasi kaku rata
Pipe for electrical installation, Particular specification for flat rigid insulated pipe
29
SNI 05-0069-1987
Pipa union (conduit)
Conduits
SNI 04-1701-1989
Pipa untuk instalasi listrik, Persyaratan umum
Pipe for electrical installation, General reguirement
29.120.20
Alat sambung
7 30
Connecting devices
SNI 04-3004-1992
Blok terminal keramik untuk penghantar tembaga
Terminal ceramic block for copper conductor
31
SNI 04-3003-1992
Blok keramik untuk terminal
Ceramic block for terminals
14
SNI 04-4186-1996
Konektor tembus kedap air untuk kabel pilin udara tegangan rendah
Waterproof breakthrough connectors for low-voltage overhead line winding cables
20
SNI 04-3873-1995
Konektor tembus berbadan logam untuk kabel pilin udara tegangan rendah
Metal bodies breakthrough connectors for low voltage overhead line winding cables
22
SNI 04-3885-1995
Selongsong sambung jenis tekan
Pressure type junction sleeves
16
SNI 04-6609-2001
Lengkapan sambungan rumah dan bangunan untuk listrik pedesaan
Connecting devices of houses and buildings for rural electrification
11
- 93 -
SNI IEC 60034-5:2011
Mesin listrik berputar - Bagian 5: Tingkat proteksi yang diberikan oleh desain integral dari mesin listrik berputar (kode IP) – Klasifikasi
Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification
IEC 60034-5 ed 4.1 (2006-11) Rotating electrical machines – Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) – Classification Translation SNI IEC 62006:2013
IDT Mesin hidrolik-Uji keberterimaan instalasi pembangkit listrik tenaga air sekala kecil
Hydraulic machine-installation acceptance test for small scale hydroelectricity
74
Electrical household appliances and similar-Safety-Part 1: General requirements
74
Switches for fixed electrical installations tanggadan homes similar-Part 1: General requirements
74
Rotating electrical machines - Part 3: Special requirement for synchronous generators are turned by steam turbines or combustion gas turbines
74
IEC 62006:2010 Translation SNI 7859:2013
IDT Peranti listrik rumah tangga dan sejenis-Keselamatan-Bagian 1: Persyaratan umum
IEC 60335-1:2010 Translation SNI IEC 60669-1:2013
IDT Saklar untuk instalasilistrik magun rumah tanggadan sejenis-Bagian 1: Persyaratan umum
IEC 60034-3:2007 Translation SNI IEC 60034-3:2013
IDT Mesin listrik berputar - Bagian 3: Persyaratan khusus untuk generator sinkron yang diputar oleh turbin uap atau turbin gas bakar
IEC 60034-3:2007 Translation SNI IEC 60445:2011
IDT Prinsip dasar dan prinsip keselamatan untuk antarmuka manusia-mesin, penandaan dan identifikasi – Identifikasi terminal perlengkapan dan terminasi konduktor
Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals and conductor terminations
IEC 60445 (2006-11) Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations Translation SNI IEC 60034-1:2013
IDT Mesin listrik berputar - Bagian 1: Pengenal dan unjuk kerja
Rotating electrical machines - Part 1: Rating and performance
74
IEC 60034-1:2010 Translation SNI 7611:2011
IDT Pedoman untuk pemilihan insulator berkaitan dengan kondisi terpolusi
Guidelines for selection of insulator related to poluted condition
SPLN 10-3B 1993f (Standar Perusahaan Umum Listrik Negara) IDT SNI 7610:2011
Pembentukan gas pada cairan insulasi akibat stres dan ionisasi elektrik
Gassing of insulating liquids under electrical stress and ionization
IEC 60628 (1985-01) Gassing of insulating liquids under electrical stress and ionization MOD SNI IEC 60999-2:2011
Gawai hubung – Konduktor listrik tembaga – Persyaratan keselamatan untuk unit klem tipe sekrup dan nirsekrup - Bagian 2: Persyaratan khusus unit klem untuk konduktor di atas 35 mm2 sampai dengan 300 mm2
Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
IEC 60999-2 ed 2.0 (2003-05) Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) Translation SNI IEC 60255-22-1:2011
IDT Rele ukur dan perlengkapan proteksi, Bagian 22 – 1: Uji gangguan listrik - uji imunitas lonjakan 1 MHz
Measuring relays and protection equipment – Part 22-1 : Electrical disturbance tests – 1 mHz burst immunity tests
IEC 60255-22-1 Ed.2.0 Translation SNI IEC 60998-1:2011
IDT Gawai konektor untuk sirkit tegangan rendah untuk perlengkapan rumah dan penggunaan yang serupa – Bagian 1: Persyaratan umum
Connecting devices for low-voltage circuits for household and similar purposes – Part 1: General requirements
IEC 60998-1 ed 2.0 (2002-12) Connecting devices for low-voltage circuits for household and similar purposes – Part 1: General requirements Translation SNI IEC 60034-2-1:2013
IDT Mesin listrik berputar - Bagian 2-1: Metode standar untuk menentukan rugirugi dan efisiensi dari pengujian (tidak termasuk mesin untuk kendaraan traksi)
Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
76
Copper conductor terminal block
11
IEC 60034-2-1:2007 Translation SNI 04-0201-1987
29.120.30
IDT Blok terminal hantaran tembaga
Tusuk kontak, kotak kontak, perangkai
SNI 04-3892.2.3-2000
Plugs, socket-outlets, couplers
Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenisnya - Bagian 2.3: Persyaratan khusus untuk kotak-kontak yang bersakelar tanpa interlok untuk instalasi tetap
Plugs and socket-outlets for household and similar purposes - Part 2.3: Particular requirements for switched socket outlets without interlock for fixed installations
12
IEC 60884-2-3: 1989, Plugs and socket-outlets for household and similar purposes - Part 2.3: Particular requirements for switched socket-outlets without interlock for fixed installations Translation
IDT
SNI 04-3892.1.1-2003
Tusuk-kontak dan kotak-kontak untuk keperluan rumah-tangga dan sejenisnya - Bagian 1-1: Persyaratan umum - Bentuk dan ukuran
Plugs and socket-outlets for household and similar purpose - Part 1-1: General requirements - Type and size
SNI 04-6202.3-2000
Tusuk-kontak, kotak-kontak dan penyambung untuk keperluan industri Bagian 3: Persyaratan khusus untuk tusuk-kontak, kotak-kontak, penyambung dan inlet pemanfaat untuk penggunaan dalam atmosfer gas ledak
Plugs and socket-outlets and couplers for industrial purposes - Part 3: Particular requirements for plugs, socket outlets, connectors and appliance inlets for use in explosive gas atmospheres
13 8
IEC 309-3 : 1994, Plugs and socket-outlets and couplers for industrialpurposes. Part 3 : Particular requirements for plugs, socket-outlets, connectors and appliance inlets-for use in explosive gas atmospheres Translation SNI IEC 60884-1:2009
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan setipenya - Bagian 1: Persyaratan umum
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
90
IEC 60884-1:2009, Plugs and socket-outlets for household and similar purposes - Part 1: General requirements Translation SNI IEC 60320-1:2009
IDT Pengkopel untuk peralatan rumah tangga dan keperluan sejenis - Bagian 1 : Persyaratan umum
Appliance couplers for household and similar general purposes - Part 1: General requirements
IEC 60320-1: ,Consolidated Edition 2.1 (incl. Am1) (2007-11) Appliance couplers for household and similar general purposes - Part 1: General requirements Translation SNI IEC 61439-1:2010
IDT Rakitan gawai hubung-bagi dan kendali voltase rendah - Bagian 1: Ketentuan umum
Low-voltage switchgear and controlgear assemblies - Part 1: General rules
IEC 61439-1 ED 1.0 (2009-01) Translation SNI 04-3892.1-2006
IDT Tusuk-kontak dan kotak-kontak untuk keperluan rumah tangga dan sejenisnya - Bagian 1: Persyaratan umum
Plugs and socket-outlets for household and similar purposes. Part 1: General requirements
- 94 -
118
SNI IEC 60884-2-1:2014
Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan keperluan sejenis - Bagian 2-1: Persyaratan khusus untuk tusuk kontak bersekering (IEC 60884-2-1:2006, IDT)
Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs (IEC 60884-2-1: 2006, IDT)
SNI IEC 60884-2-1:2012
Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenis Bagian 2-1: Persyaratan khusus untuk tusuk kontak bersekering
Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs
IEC 60884-2-1 ed2.0 (2006-10) IDT SNI IEC 60884-2-2:2012
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenis Bagian 2-2: Persyaratan khusus untuk kotak kontak peranti
Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances
IEC 60884-2-2 ed2.0 (2006-10) IDT SNI IEC 60884-2-4:2012
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenis Bagian 2-4: Persyaratan khusus untuk tusuk kotak dan kotak kontak SELV
Plugs and socket-outlets for household and similar purposes - Part 2-4: Particular requirements for plugs and socket-outlets for SELV
IEC 60884-2-4 ed3.0 (2007-11) IDT SNI IEC 60884-2-5:2012
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenis Bagian 2: Persyaratan khusus untuk adaptor
Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors
IEC 60884-2-5 ed1.0 (1995-07) IDT SNI IEC 60884-2-6:2012
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan sejenis Bagian 2-6: Persyaratan khusus untuk kotak kontak bersakelar dengan silih kunci untuk instalasi listrik magun
Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations
IEC 60884-2-6 ed1.0 (1997-08) IDT SNI IEC 60884-1:2014
IDT Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan keperluan sejenis - Bagian 1: Persyaratan umum (IEC 60884-1:2006, IDT)
SNI IEC 60884-2-2:2014
Tusuk kontak dan kotak kontak untuk keperluan rumah tangga dan keperluan sejenis - Bagian 2-2: Persyaratan khusus kotak kontak untuk peranti pemanfaat (IEC 60884-2-2:2006, IDT)
Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for appliances utilizing the contact box (IEC 60884-2-2: 2006, IDT)
SNI IEC 60320-2-4:2012
Kopler peranti untuk keperluan rumah tangga dan keperluan umum sejenis Bagian 2-4: Kopler tergantung pada bobot pemakaian peranti
Appliances couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliances weight for engagement
Plugs and socket-outlets for household and similar purposes - Part 1: General requirements (IEC 60884-1: 2006, IDT)
IEC 60320-2-4:2005, IDT Translation SNI IEC 62055-31:2012
IDT Pengukuran listrik - Sistem pembayaran- Bagian 31: Persyaratan khusus Meter pembayaran statik untuk energi aktif (kelas 1 dan 2) (IEC 6205531:2005, IDT)
Electricity metering - Payment systems - Part 31: Particular requirements - Static payment meters for active energy (classes 1 and 2)
IEC 62055-31:2005 IDT SNI IEC/TR 60919-3:2012
Kinerja sistem arus searah tegangan tinggi (ASTT) dengan konverter saluran terkomutasi – Bagian 3: Kondisi dinamik (IEC/TR 60919-3:2009, IDT)
Performance of high – voltage direct current (HVDC) systems with line – commutated converters Part 3: Dynamic conditions
(IEC/TR 60919-3:2009 IDT SNI IEC 60320-2-1:2012
Kopler peranti untuk keperluan rumah tangga dan keperluan umum sejenis Bagian 2-1: Kopler mesin jahit
Appliances couplers for household and similar general purposes - Part 2-1: Sewing machine couplers
IEC 60320-1:2000, IDT Translation SNI IEC 60320-2-2:2012
IDT Kopler peranti untuk keperluan rumah tangga dan keperluan umum sejenis Bagian 2-2: Kopler interkoneksi untuk keperluan rumah tangga dan sejenis
Appliances couplers for household and similar general purposes - Part 2-2: Interconnection couplier for household and similar equipment
IEC 60320-2-2:1998, IDT Translation
IDT
SNI IEC/TS 60815-1:2014
Pemilihan dan penetapan dimensi insulator tegangan tinggi yang digunakan pada kondisi polusi - Bagian 1 : Definisi, informasi dan prinsip umum (IEC/TS 60815-1:2008, IDT)
Selection and determination of the dimension of the high-voltage insulators are used in pollution conditions - Part 1: Definitions, information and general principles (IEC / TS 608151: 2008, IDT)
SNI IEC 60998-2-1:2012
Gawai hubung untuk sirkit voltase rendah untuk keperluan rumah tangga dan sejenis - Bagian 2-1: Persyaratan khusus untuk gawai hubung sebagai entitas dengan unit pengklem jenis sekrup
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
IEC 60998-2-1:2002, IDT Translation SNI IEC 60998-2-2:2012
IDT Gawai hubung untuk sirkit voltase rendah untuk keperluan rumah tangga dan sejenis - Bagian 2-2: Persyaratan khusus untuk gawai hubung sebagai entitas terpisah dengan unit pengklem jenis nirsekrup
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
IEC 60998-2-2:2002, IDT Translation SNI IEC 60998-2-3:2012
IDT Gawai hubung untuk sirkit voltase rendah untuk keperluan rumah tangga dan sejenis - Bagian 2-3: Persyaratan khusus untuk gawai hubung sebagai entitas terpisah dengan unit pengklem tembus insulasi
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
IEC 60998-2-3:2002, IDT Translation SNI IEC 60998-2-4:2012
IDT Gawai hubung untuk sirkit voltase rendah untuk keperluan rumah tangga dan sejenis - Bagian 2-4: Persyaratan khusus untuk gawai hubung puntir
Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for twist-on connecting devices
IEC 60998-2-4:2004, IDT Translation SNI IEC 60335-2-73:2012
IDT Piranti listrik rumah tangga dan sejenis -Keselamatan - Bagian 2-73: Persyaratan khusus untuk pemanas benam mangun
Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters
IEC 60335-2-73:2009, IDT Translation
IDT
SNI IEC 60335-2-101:2012 Piranti listrik rumah tangga dan sejenis -Keselamatan - Bagian 2-101: Persyaratan khusus untuk alat penguap
Household and similar electrical appliances - Safety - Part 2-101: Particular requirements for vaporizers
IEC 60335-2-101:2008, IDT Translation SNI IEC 60245-4:2014
IDT Kabel berinsulasi karet - Voltase pengenal sampai dengan 450/750 V Bagian 4: Kabel senur dan kabel fleksibel (IEC 60245-4:2011, IDT)
- 95 -
Rubber insulated cables - Voltage up to and including 450/750 V - Part 4: flexible cords and cables (IEC 60245-4: 2011, IDT)
SNI IEC 60320-2-3:2012
Kopler peranti untuk keperluan rumah tangga dan keperluan umum sejenis Bagian 2-3: Kopler peranti dengan tingkat proteksi lebih tinggi dari IPX0
Appliances couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
IEC 60320-2-3:2005, IDT Translation SNI IEC 60633:2015
IDT Istilah untuk transmisi Arus Searah Tegangan Tinggi (ASTT) (IEC 60633:2009, IDT)
Terminology for high-voltage direct current (HVDC) transmission (IEC 60633:2009, IDT)
38
IEC 60633:2009 IDT
29.120.40
Sakelar
SNI 04-6210-2000
Switches Kombinasi swits pengaman lebur arus bolak-balik tegangan tinggi
High voltage alternating current switch-fuse combination
57
Switches for appliances - Part 1: General requirements
94
13
IEC 60420 : 1990, High-voltage alternating current switch-fuse combinations Translation SNI 04-6508.1-2001
IDT Sakelar untuk pemanfaat - Bagian 1: Persyaratan umum
IEC 61058: 1996, Switches for appliances - Part 1: General requirements Translation
IDT
SNI 04-6203.2.2-2000
Sakelar untuk instalasi listrik tetap rumah tangga dan sejenis - Bagian 2 : Persyaratan khusus - Seksi 2: Sakelar kontrol jarak jauh elektromagnetik (SKJJ)
Switches for household and similar fixed electrical installation - Part 2 : Particular requirements - Section 2 : Electromagnetic remote control switches (RCS)
SNI 04-6254-2000
Tata penempatan tombol darurat
Codes for location of emergency pushbutton switches
SNI IEC 60669-2-2:2012
Sakelar untuk instalasi listrik magun rumah tangga dan sejenis - Bagian 2 2: Persyaratan khusus - Sakelar kendali jarak jauh elektromagnetik
Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS)
2
IEC 60669-2-2 ed3.0 (2006-08) IDT
IDT
SNI IEC 60669-2-3:2012
Sakelar untuk instalasi listrik magun rumah tangga dan sejenis - Bagian 2 3: Persyaratan khusus - Sakelar tunda waktu
Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
IEC 60669-2-3 ed3.0 (2006-08) IDT
IDT
SNI IEC 60947-3:2012
Perangkat hubung bagi dan kendali voltase rendah - Bagian 3: Sakelar, diskonektor, diskonektor sakelar dan unit kombinasi sekering
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switchdisconnectors and fuse-combination units
IEC 60947-3 ed3.0 (2008-08) IDT
IDT
SNI 04-6203.1-2006
Saklar untuk instalasi listrik tetap rumah tangga dan sejenisnya - Bagian 1: Persyaratan umum
Switches for household and similar fixed-electrical - Part 1: General requirements
95
SNI IEC 60669-1:2009
Sakelar untuk instalasi rumah-tangga dan instalasi listrik magun sejenisnya Bagian 1: Persyaratan umum
Switches for household and similar fixed-electrical installations - Part 1: General requirements
96
IEC 60669-1:2009, Switches for household and similar fixed-electrical installations - Part 1: General requirements Translation SNI IEC 60669-2-1:2009
IDT Sakelar Untuk Rumah Tangga dan Instalasi Listrik Magun Sejenis - Bagian 21: Persyaratan Khusus - Sakelar Elektronik
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
10
IEC 60669-2-1:2009, Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches Translation SNI IEC 60669-2-5:2016
IDT Sakelar untuk instalasi listrik magun rumah tangga dan sejenis - Bagian 2-5: Persyaratan khusus - Sakelar dan lengkapan terkait untuk penggunaan dalam sistem elektronik rumah dan gedung (HBES) (IEC 60669-2-5:2013, IDT)
The switch for the fixed electrical installation of household and similar - Part 2-5: Particular requirements - Switches and related accessories for use in home and building electronic systems (HBES) (IEC 60669-2-5:2013, IDT)
52
Alternating current switches
14
IEC 60669-2-5:2013 IDT SNI 04-0533-1989
29.120.50
Sakelar arus bolak-balik
Sekering dan alat proteksi arus lebih lainnya
Fuses and other overcurrent protection devices
SNI 04-2950-1992
Penutup sekering berulir keramik
Threaded ceramic fuse cover
17
SNI 04-6507.2-2002
Pemutus sirkit untuk proteksi arus lebih pada instalasi rumah tangga dan sejenisnya - Bagian 2: Pemutus sirkit untuk operasi arus bolak-balik dan arus searah
Circuit-breakers for overcurrent protection for household and similar installations - Part 2: Circuit-breakers for a.c and d.c. operation
20
IEC 60898-2-2000 Circuit-breakers for overcurrent protection for household and similar installations - Part 2 : Circuit-breakers for a.c. and d.c. operation cover sheet SNI 04-6956.2.1-2005
IDT Pemutus sirkit arus sisa tanpa proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenisnya (RCCB) - Bagian 2-1: Penerapan persyaratan umum RCCB yang berfungsi tak tergantung dari tegangan saluran
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB’s) - Part 2-1: Applicability of the general rules to RCCB’s functionally independent of line voltage
7
IEC 61008-2-1: 1990-12, Residual current operated circuit-breakers without integral over-current protection for household and similar uses (RCCB's) - Part 2-1 : Applicability of the general rules to RCCB's functionally independent of line voltage Translation SNI 04-6285-2000
IDT Pengaman lebur untuk keperluan instalasi rumah tangga dan sejenisnya
Fuses for domestic and similar purposes
49
IEC 241: 1968, Fuses for domestic and similar purposes Translation SNI 04-6286-2000
IDT Pemutus tenaga yang dioperasikan oleh arus sisi dengan pengaman arus lebih terpadu untuk penggunaan rumah tangga dan sejenisnya (RCBO)
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's)
128
IEC 61009-1: 1991, Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules Translation SNI 04-6505.1-2001
MOD Pengaman lebur tegangan rendah - Bagian 1: Persyaratan umum
Low-voltage fuses - Part 1: General requirement
75
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
42
IEC 269-1: 1998, Low-voltage fuses - Part 1: General requirements Translation SNI IEC 60898-1:2009
IDT Lengkapan listrik - pemutus-sirkit untuk proteksi arus-lebih untuk proteksi arus-lebih untuk instalasi rumah tangga dan yang sejenisnya - Bagian 1: Pemutus-sirkit untuk operasi a.b
IEC 60898-1:2009, Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation Translation
IDT
SNI 04-6507.12002/Amd1-2006
Amandemen 1 Pemutus sirkit untuk proteksi arus lebih pada instalasi rumah tangga dan sejenisnya - Bagian 1: Pemutus sirkit untuk operasi arus bolakbalik
Amendment 1 Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c operated
SNI IEC 60099-1:2009
Arester Surja - Bagian 1: Arester surja resistor non linear dengan sela untuk sistem a.b
Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
IEC 60099-1:2009, Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems Translation
IDT
- 96 -
46
SNI IEC 60099-4:2009
Arester Surja - Bagian 4: Arester surja oksida-logam tanpa sela untuk sistem a.b
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
152
IEC 60099-4:2009, Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems Translation SNI IEC 61009-2-1:2014
IDT Gawai proteksi arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBO’s) – Bagian 2-1: Penerapan aturan umum untuk RCBO’s yang berfungsi tak tergantung dari voltase lin
Residual current protective devices with integrated overcurrent protection for household and similar use (RCBO's) - Part 2-1: Application of the general rules to RCBO's that function independently of the voltage lin
14
Residual current protective devices with integrated overcurrent protection for household and similar use (RCBO's) - Part 2-2: Application of the general rules to RCBO's functioning depends on the voltage lin
14
IEC 61009-2-1:1991 IDT
IDT
SNI IEC 61009-2-2:2014
Gawai proteksi arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBO’s) – Bagian 2-2: Penerapan aturan umum untuk RCBO’s yang berfungsi tergantung dari voltase lin
IEC 61009-2-2:1991 IDT
IDT
SNI IEC 61008-1:2011
Pemutus sirkit arus sisa tanpa proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenisnya (RCCB)-Bagian 1: Persyaratan umum
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules
IEC 61008-1 Ed 3.0 (2010-02) Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules Coversheet SNI IEC 61009-1:2014
IDT Gawai proteksi arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBOs) – Bagian 1: Aturan umum
Residual current protective devices with integrated overcurrent protection for household and similar use (RCBOs) - Part 1: General rules
14
Residual current operated circuit breaker with integrated overcurrent protection for household and similar use (RCBO) - Part 2-1: Application of the general rules to RCBO functionally independent of line voltage
10
Residual current operated circuit breaker with integrated overcurrent protection for household and similar use (RCBO) - Part 2-2: Application of the general rules to RCBO functionally dependent on line voltage
10
IEC 61009-1:2012 IDT
IDT
SNI IEC 61009-2-1:2014
Pemutus sirkit dioperasikan arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBO) – Bagian 2-1: Penerapan aturan umum untuk RCBO yang secara fungsi tak tergantung pada voltase lin (IEC 61009-2-1:1991, IDT)
IEC 61009-2-1:1991 IDT SNI IEC 61009-2-2:2014
Pemutus sirkit dioperasikan arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBO) – Bagian 2-2: Penerapan aturan umum untuk RCBO yang secara fungsi tergantung pada voltase lin (IEC 61009-2-2:1991, IDT)
IEC 61009-2-2:1991 SNI IEC 61008-2-2:2014
SNI IEC 60269-2:2015
IDT Pemutus sirkit arus sisa tanpa proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCCB) - Bagian 2-2: Penerapan aturan umum RCCB yang berfungsi tergantung dari voltase lin (IEC 61008-2-2:1990, IDT) Sekering voltase rendah - Bagian 2: Persyaratan suplemen untuk sekering yang digunakan oleh personel berwenang (sekering terutama untuk penerapan industri) - Contoh sistem terstandardisasi sekering A hingga K (IEC 60269-2: 2013, IDT)
Residual current circuit breakers without overcurrent protection integrated for household and similar use (RCCB) - Part 2-2: Application of general rules RCCB functioning depends on the voltage lin (IEC 61008-2-2: 1990, IDT) Low-voltage fuses - Part 2: Requirements supplement for fuses used by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K (IEC 60269-2: 2013, IDT)
201
IEC 60269-2: 2013 IDT SNI IEC 60269-4:2015
Sekering voltase rendah - Bagian 4: Persyaratan suplemen untuk tautan sekering untuk proteksi gawai semikonduktor (IEC 60269-4:2009, IDT)
Low-voltage fuses - Part 4: Requirements supplement for fuse links for protection of semiconductor devices (IEC 60269-4: 2009, IDT)
58
IEC 60269-4:2009 IDT SNI IEC 60269-3:2015
Sekering voltase rendah - Bagian 3: Persyaratan suplemen untuk sekering yang digunakan oleh orang awam (sekering terutama untuk penerapan rumah tangga dan sejenis) - Contoh sistem terstandardisasi sekering A hingga F (IEC 60269-3:2010, IDT)
Low-voltage fuses - Part 3: Requirements supplement for fuses used by laymen (fuses mainly for household and similar application) - Examples of standardized systems of fuses A to F (IEC 60269-3: 2010, IDT)
156
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules (IEC 61009-1:2012, IDT)
365
IEC 60269-3:2010 IDT SNI IEC 61009-1:2014
Pemutus sirkit dioperasikan arus sisa dengan proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenis (RCBO) - Bagian 1: Aturan Umum (IEC 61009-1:2012, IDT)
IEC 61009-1:2012 SNI 04-0922-1989
29.120.60
IDT Pipa gelas untuk sekering
Glass pipes for electrical fuses
Papan hubung bagi dan kendali
6
Switchgear and controlgear
SNI 04-4188-1996
Ketentuan umum standar perlengkapan hubung bagi dan kontrol untuk tegangan tinggi
General rules for high-voltage switchgear and controlgears
39
SNI 04-6282.7.1-2000
Hubung bagi dan kontrol tegangan rendah. Bagian 7: Perlengkapan tambahan. Seksi 1: Blok terminal untuk konduktor tembaga
Low-voltage switcgear and controlgear. Part 7: Ancillary equipment. Section 1: Terminal blocks for copper conductors
20
IEC 60947-7-1: 1989, Low-voltage switcgear and controlgear - Part 7: Ancillary equipment - Section 1: Terminal blocks for copper conductors Translation SNI 04-6281-2000
IDT Persyaratan tambahan untuk PHB dan kontrol berselungkup dari 1 kV sampai 72,5 kV yang digunakan pada kondisi klimatik yang berat
Additional requirements for enclosed switchgear and controlgear from 1 kV to 72,5 kV to be used in severe climatic conditions
20
IEC 60932: 1988, Additional requirements for enclosed switchgear and controlgear from 1 kV to 72.5 kV to be used in severe climatic conditions Translation
IDT
SNI 04-0532-1989
Kotak hubung bagi arus bolak-balik
Alternating current switchboard
14
SNI 04-1691-1989
Perlengkapan hubung bagi dan kontrol rakitan pabrik untuk tegangan rendah.
Low voltage switchgear and controlgear, Factory assemblies.
14
SNI 04-1225-1989
Perlengkapan hubung bagi dan kendali selungkup logam tegangan rendah
Low voltage metal enclosed switchgear and controlgear
21
29.120.70
Relai
Relays
SNI 04-6186.13-1999
Relai listrik. Bagian 13: Bias relai diferensial (prosentase)
Electrical relays. Part 13: Biased (percentage) differensial relays
12
SNI 04-6186.25-2003
Relai listrik - Bagian 25: Uji emisi elektromagnetik pada relai pengukuran dan perlengkapan proteksi
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
15
Electrical relays - Part 20: Protection systems
28
IEC 60255-25: 2000 Translation SNI 04-6186.20-2000
IDT Relai listrik - Bagian 20: Sistem proteksi
IEC 60255-20: 1984, Electrical relays - Part 20: Protection systems Translation
IDT
- 97 -
SNI 04-6186.22.2-2001
Relai listrik - Bagian 22: Uji gangguan listrik pada relai pengukuran dan perlengkapan pengaman - Seksi 2: Uji pelepasan elektrostatik
Electrical relays - Part 22: Electronic disturbance tests for measuring relays and protection equipment - Section 2: Electrostatic discharger tests
14
IEC 60255-22-2: 1988, Electrical relays - Part 22: Electronic disturbance tests for measuring relays and protection equipment - Section 2: Electrostatic discharger tests Translation
IDT
SNI 04-6186.14-1999
Relai listrik. Bagian 14: Uji ketahanan kontak relai listrik - Nilai yang dipilih untuk beban kontak
Electrical relays. Part 14: Endurance tests for electrical relay contacts - Prefered values for contact loads
SNI 04-6186.15-2000
Relai listrik - Bagian 15: Uji ketahanan untuk kontak relai listrik - Spesifikasi untuk karakter perlengkapan uji
Electrical relays - Part 15: Endurance tests for electrical relay contacts - Specification for the characteristics of test equipment
14 5
IEC 255-15: 1981, Electrical relays, Part 15: Endurance tests for electrical relay contacts - Specification for the characteristics of test equipment Translation SNI 04-6186.16-2000
IDT Relai listrik - Bagian 16: Relai pengukuran impedans
Electrical relays - Part 16: Impedance measuring relays.
15
Electrical relays - Part 21: Vibration, shocks bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests
15
IEC 60255-16 edisi pertama 1982, Electrical Relays, Part 16: Impedance measuring relays Translation SNI 04-6186.21.2-2001
MOD Relai listrik - Bagian 21: Uji vibrasi, kejut dan seismik pada relai pengukuran dan perlengkapan pengaman - Seksi 2: Uji benturan dan kejut
IEC 60255-21-2: 1988, Electrical relays - Part 21: Vibration, shocks bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests Translation SNI 04-6186.22.3-2001
IDT Relai listrik - Bagian 22: Uji gangguan listrik pada relai pengukuran dan perlengkapan pengaman - Seksi 3: Uji gangguan radiasi medan elektromagnetik
Electrical relays - Part 22: Electrical disturbance test for measuring relays and protection equipment - Section 3: Radiated electromagnetic field disturbance tests
16
IEC 60255-22-3: 1989, Electrical relays - Part 22: Electrical disturbance test for measuring relays and protection equipment - Section 3: Radiated electromagnetic field disturbance tests Translation SNI 04-6186.23-2002
IDT Relai listrik - Bagian 23: Unjuk kerja kontak
Electrical relays - Part 23: Contact performance
39
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
16
IEC 60255-23:1994, Electrical relays - Part 23: Contact performance Translation SNI 04-6186.21.3-2001
MOD Relai listrik - Bagian 21: Uji vibrasi, kejut, benturan dan seismik pada relai ukur dan perlengkapan pengaman - Seksi 3: Uji seismik
IEC 60255-21-3: 1993, Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests Translation SNI 04-6186.21.1-2000
IDT Relai listrik - Bagian 21: Pengujian getaran, kejut dan gempa pada relai pengukuran dan perlengkapan proteksi - Seksi 1: Pengujian gempa
Electrical relays - Part 21: Vibration, shock and seismic testing on measuring relays and protection equipment - Section 1: Seismic testing
10
IEC 255-21-1: 1988-09, Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal) Translation SNI 04-6186.22.4-2001
IDT Relai listrik - Bagian 22: Uji gangguan listrik untuk relai ukur dan perlengkapan proteksi - Seksi 4: Uji gangguan transien cepat
Electrical relays - Part 22: Electrical disturbances tests for measuring relays and protection equipment - Section 4: Fast transient disturbances test
IEC 60225-22-4:1992, Electrical relays - Part 2: Eletrical relays and protection equipment, Section 4: Fast transient disturbance test Translation
29.120.99
IDT
Lengkapan listrik lainnya
SNI IEC 60358:2009
Other electrical accessories
Kapasitor Kopling dan Kapasitor Pembagi
Coupling capacitors and capacitor dividers
39
IEC 60358:2009, Coupling capacitors and capacitor dividers Translation
29.130
IDT
Switchgear and controlgear
Papan hubung bagi dan kendali
29.130.10
Peralatan pengontrol penghubung dan hubung bagi tegangan tinggi
High voltage switchgear and controlgear
SNI 04-6950-2003
Saluran udara tegangan tinggi (SUTT) dan saluran udara tegangan ekstra tinggi (SUTET) - Nilai ambang batas medan listrik dan medan magnet
High voltage and extra high voltage lines - Limitation value for electrical fields and electromagnetic fields
9
SNI IEC 60694:2009
Standar spesifikasi bersama untuk perlengkapan hubung bagi dan kendali tegangan tinggi
Common Specifications For High-Voltage Switchgear And Controlgear Standards
91
Hubungan kabel untuk PHB berselungkup logam berinsulasi gas untuk tegangan pengenal 72,5 kV dan diatasnya Kabel insulasi diekstrusi dan berisi fluida - Terminasi kabel tipe kering dan berisi fluida
Cable connections for gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above – fluid-filled and extruded insulation cables – fluid-filled and dry type cable terminations
10
IDT Sakelar tegangan tinggi - Bagian 1: Sakelar untuk tegangan pengenal di atas 1 kV dan di bawah 52 kV
High-voltages switches – Part 1: Switches for rated voltages above 1 kV and less than 52 kV
IEC 60694:2002 Translation SNI IEC 60859:2009
IDT
IEC 60859:1999 Translation SNI IEC 60265-1:2011
IEC 60265-1 (1998-01) High-voltages switches – Part 1: Switches for rated voltages above 1 kV and less than 52 kV IDT SNI 04-1927-1990
Pemutus tenaga arus bolak-balik tegangan tinggi bagian-bagian nilai pengenal
High voltage alternating current circuit breaker, rated value parts
55
IEC 56 (60056) : High-voltage swicthgear and controlgear - Alternating current circuit - breakers (IEC ini sudah ditarik thn 2001 diganti IEC 62271-100 ed.1.0 - 2001 MOD
29.130.20
Peralatan pengontrol penghubung dan hubung bagi tegangan rendah
SNI 04-6282.3-2001
Low voltage switchgear and controlgear
Perlengkapan hubung-bagi dan kontrol tegangan rendah - Bagian 3: Sakelar, pemisah, sakelar-pemisah dan unit pengaman-lebur kombinasi
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors and fusecombination units
52
IEC 60947: 1999, Low-voltage switchgears and controlgears - Part 3: Switches, disconnectors and fuse-combination units Translation SNI 04-6282.6.2-2001
MOD Perlengkapan hubung bagi dan kontrol tegangan rendah - Bagian 6: Perlengkapan fungsi - Seksi 2: Gawai (atau perlengkapan) kontrol dan switsing pengaman (KSP)
Low-voltage switchgear and controlgear equipment - Part 6: Function equipment - Section 2: Control and protective switching devices (CPS)
73
IEC 947-6-2: 1992 + Amendment 1: 1997 + Amendment 2: 1998, Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 2: Control and protective switching devices (CPS) Translation SNI 04-6282.7.2-2001
IDT Perlengkapan hubung-bagi dan kontrol tegangan rendah - Bagian 7: Perlengkapan bantu - Seksi 2: Blok terminal konduktor pengaman untuk konduktor tembaga
Low-voltage switchgear and controlgear equipment - Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for copper conductors
12
IEC 60947-7-2: 1995, Low-voltage switchgear and controlgear equipment - Part 7: Ancillary equipment - Section 2: Protective conductor terminal blocks for copper conductors Translation SNI 04-6282.2-2002
IDT Perlengkapan hubung-bagi dan kontrol tegangan rendah - Bagian 2: Pemutus sirkit
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
IEC 60947-2-2002, Low-voltage switchgear and controlgear - Part 2: Circuit-breakers Translation
IDT
- 98 -
169
SNI IEC 60439-1:2009
Rakitan perlengkapan hubung bagi dan kendali voltase rendah - Bagian 1: Rakitan uji-jenis dan rakitan uji jenis parsial
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially typetested assemblies
105
IEC 60439-1:2004 Translation SNI IEC 60947-7-1:2009
IDT Perlengkapan hubung bagi dan kendali tegangan rendah - Bagian 7-1: Peralatan tambahan - Blok terminal untuk konduktor tembaga
Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
IEC 60947-7-1:2009, Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment – Terminal blocks for copper conductors Translation SNI 04-6282.1-2003
IDT Perlengkapan hubung-bagi dan kontrol tegangan rendah - Bagian 1: Ketentuan umum
Low-voltage switchgears and control gears - Part 1: General rules
IEC 60947-1: 2001-12 Coversheet SNI IEC 60947-1:2009
IDT Perlengkapan hubung bagi dan kendali tegangan rendah - Bagian 1 : Aturan Umum
Low-voltage switchgear and controlgear - Part 1: General rules
179
IEC 60947-1:2009, Low-voltage switchgear and controlgear - Part 1: General rules Translation SNI IEC 61439-2:2011
IDT Rakitan perlengkapan hubung bagi dan kendali voltase rendah – Bagian 2: Rakitan perlengkapan hubung bagi dan kendali daya
Low-voltage switchgear and controlgear assemblies – Part 2 : Power switchgear and controlgear assemblies
IEC 61439-2 (2009) Low-voltage switchgear and controlgear assemblies – Part 2 : Power switchgear and controlgear assemblies Coversheet SNI IEC 61439-2:2013
IDT Rakitan perlengkapan hubung bagi dan kendali voltase rendah - Bagian 2: Rakitan perlengkapan hubung bagi dan kendali daya
Low-voltage switchgear and controlgear assemblies - Part 2 : Power switchgear and controlgear assemblies
IEC 61439-2:2011 Translation SNI IEC 61439-3:2014
IDT Rakitan perangkat penyakelaran dan kendali voltase rendah - Bagian 3: Panel distribusi yang dimaksudkan untuk dioperasikan oleh orang awam (DBO) (IEC 61439-3:2012, IDT)
Assembled switches device and low voltage control - Part 3: Panel distribution is intended to be operated by a layman (DBO)
IEC 61439-3: 2012 SNI IEC 62208:2016
IDT Selungkup kosong untuk rakitan perangkat sakelar dan kendali (switchgear and controlgear) voltase rendah - Persyaratan umum (IEC 62208:2011, IDT)
Empty enclosures for switch assemblies and control devices (switchgear and controlgear) Low voltage - General requirements (IEC 62208:2011, IDT)
25
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
36
IEC 62208:2011 IDT SNI 04-6282.2-2001 amd 1-2002
Perlengkapan hubung bagi dan kontrol tegangan rendah - Bagian 2: Pemutus tenaga
IEC 60947-2:1995, Amendement 1, Low-voltage switchgear and controlgear , Part 1: Circuit-breakers MOD SNI 04-0202-1987
Selungkup peralatan listrik tegangan rendah untuk perlengkapan hubung bagi dan pengaturan, Tingkat pengaman
Enclosure for low voltage switchgear and controlgear, Degree of protection
12
SNI 04-6916-2002
Metode asesmen kenaikan suhu dengan ekstrapolasi untuk perlengkapan hubung bagi dan kontrol tegangan rendah rakitan uji jenis parsial (RUJP)
A method of temperature-rise assesment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear
30
IEC 60890:1987, A method of temperature-rise assessment by extrapolation for partially type-tested assemblies (PTTA) of low-voltage switchgear and controlgear Translation
29.140
MOD
Lamps and related equipment
Lampu dan peralatan yang berkaitan
SNI IEC 60969:2009
Lampu swabalast untuk pelayanan pencahayaan umum - Persyaratan unjuk kerja
Self-ballasted lamps for general lighting services - Performance requirements
8
IEC 60969: ,Consolidated Edition 1.2 (incl. am1+am2) (2001-03) Self-ballasted lamps for general lighting services - Performance requirements IDT
29.140.01
Lampu secara umum
SNI IEC/TR 60887:2009
Lamps in general
Sistem pengkodean bola lampu
Glass bulb designation system for lamps
7
IEC/TR 60887 Edition 2.0 (2003-07) Glass bulb designation system for lamps Translation SNI IEC/PAS 62612:2013
IDT Lampu LED swa-balast untuk pelayanan pencahayaan umum - Persyaratan Kinerja
Self-ballasted LED - lamps for general lighting services - Performance requirements
16
Ballasted LED lamps for general lighting service with a supply voltage of> 50 V Performance requirements (IEC 62612:2013, IDT)
45
IEC/PAS 62612:2009 Translation SNI IEC 62612:2016
IDT Lampu LED swa-balast untuk layanan penerangan umum dengan tegangan suplai > 50 V - Persyaratan kinerja (IEC 62612:2013, IDT)
IEC 62612:2013 IDT SNI 04-0534-1989
Fitting lampu arus bolak-balik
Alternating current lamp fitting
17
SNI 04-6917.1-2002
Perlengkapan ballas untuk lampu (tidak termasuk lampu tabung fluoresen) Persyaratan umum dan persyaratan keselamatan - Bagian 1: Persyaratan umum
Ballast auxiliaries for discharge lamps (excluding tubular flourescent lamps) - General and safety requirements - Part 1: General requirements
41
IEC 60922:1997, Auxilaries for lamps - Ballast for discharge lamps excluding tubular flourescent lamps) - General and safety requirements Translation
29.140.10
IDT
Lambung lampu dan gagang lampu
SNI IEC 60400:2011
Lamp caps and holders
Fiting lampu untuk lampu tabung fluoresen dan fiting starter
Lampholders for tubular fluorescent lamps and starterholders
IEC 60400:2004 -11 Translation SNI 04-6707-2002
IDT Fiting lampu sekerup Edison
Edison screw lamp holders
79
IEC 60238, Edison screw lampholders IDT
29.140.20
Lampu pijar
Incandescent lamps
SNI 10-4982-1999
Lampu sorot marin tipe bola lampu halogen
Halogen bulb searchlight
SNI IEC 60064: 2007
Lampu berfilamen tungsten untuk pencahayaan domestik dan pencahayaan umum sejenis - Persyaratan kinerja
Tungsten filament lamps for domestic and similar public lighting - Performance requirements
SNI IEC 60432-1:2009
Lampu pijar - Spesifikasi keselamatan - Bagian 1 : Lampu berfilament tungsten untuk rumah tangga dan penerangan umum serupa
Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
IEC 60432-1 (Consolidated Edition 2.1 (incl. am1) (2005-05) Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes Translation
IDT
- 99 -
12
46
SNI IEC 60432-2:2015
Lampu pijar - Spesifikasi keselamatan - Bagian 2: Lampu halogen tungsten untuk rumah tangga dan penerangan umum serupa (IEC 60432-2:2012, IDT)
Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting (IEC 60432-2: 2012, IDT)
17
Incandescent lamps - Safety specifications - Part 3: tungsten halogen lamps (non-vehicle) (IEC 60432-3: 2012, IDT)
34
IEC 60432-2:2012 IDT SNI IEC 60432-3:2015
Lampu pijar - Spesifikasi keselamatan - Bagian 3: Lampu halogen tungsten (non-kendaraan) (IEC 60432-3:2012, IDT)
IEC 60432-3:2012 IDT SNI 04-1704-1989
Lampu berfilamen tungsten untuk penerangan rumah tangga dan penerangan umum yang sejenis, Persyaratan keamanan
Tungsten filament lamps for home and general lighting, Safety requirement
32
SNI 04-0448-1989
Bola gelas untuk lampu pijar, Mutu dan cara uji
Glass bulb for incandescent lamps, Specification and test method
12
SNI 10-0982-1989
Lampu pijar kapal
Ships' incandecent lamps
11
SNI 04-1474-1989
Warna lampu sinyal dan tombol tekan dalam rangkaian kendali
Colours of signal lamps and pushbuttons in control circuit
29.140.30
Lampu fluoresen
7
Fluorescent lamps. Discharge lamps
SNI 04-3561-1994
Balast untuk lampu flouresen arus bolak balik
AC fluorescent lamps ballast
20
SNI 04-3559-1999
Lampu fluoresen bentuk tabung untuk penggunaan umum
Tabular fluorescent lamps for general use
14
SNI 04-6509.1-2001
Ballas untuk tabung lampu fluoresen - Persyaratan umum dan persyaratan keamanan - Seksi 1: Persyaratan umum
Ballast for tubular fluorescent lamps - General and safety requirements - Section 1: General requirements
46
IEC 60920: 1990 Amendment 1: 1993 Amendment 2: 1990, Ballast for tubular fluorescent lamps - General and safety requirements Translation SNI 04-6510-2001
IDT Ballas untuk tabung lampu fluoresen - Persyaratan kinerja
Ballast for tubular fluorescent lamps - Performance requirements
26
IEC 60921: 1988 Amendment 1: 1990 Amendment 2: 1994, Ballast for tubular fluorescent lamps - Performance requirements Translation SNI 04-6261.1-2000
IDT Kapasitor yang digunakan dalam tabung fluoresen dan sirkuit lampu luah lainnya - Persyaratan umum dan keamanan - Bagian 1: Umum
Capacitors for use in tubular fluorescent and other discharge lamp circuit - General and safety requirements - Part 1: General
20
IEC 1048-2: 1991, Capacitors for use in tubular fluorescent and other discharge lamp circuit - General and safety requirements Translation
IDT
SNI 04-6504-2001
Lampu swa-balast untuk pelayanan pencahayaan umum - Persyaratan keselamatan
Self-ballasted lamps for general lighting - Safety requirements
SNI 04-6393-2000
Sistem lempu fluoresen dengan catudaya rangkaian modul PV - Persyaratan dan prosedur uji kenerja
Fluorescent lamps system with PV modul power supply - Requirement and performance test procedure
SNI IEC 61347-2-8:2009
Alat kendali lampu - Bagian 2-8 : Persyaratan khusus untuk balats lampu flourescent
Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps
16 7 21
IEC 61347-2-8 (Consolidated Edition 1.1 (incl. am1) (2006-03) Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps Translation SNI IEC 60901:2009
IDT Lampu fluoresen kaki tunggal - Spesifikasi unjuk kerja
Single-capped fluorescent lamps - Performance specifications
20
IEC 60901 (Consolidated Edition 2.2 (incl. am1+am2) (2001-11) Single-capped fluorescent lamps - Performance specifications Translation SNI IEC 61199:2009
IDT Lampu fluorescen kaki lampu tunggal - Spesifikasi keselamatan
Single-capped fluorescent lamps - Safety specifications
28
IEC 61199 Edition 2.0 (1999-10) Single-capped fluorescent lamps - Safety specifications Translation SNI IEC 60155:2010
IDT Penganjak pijar untuk lampu fluoresen
Glow-starter for fluorescent lamps
IEC 60155 Fourth Edition (1993-11) + Amd (1995-10) Translation SNI IEC 60921:2010
IDT Balast untuk lampu fluoresen tabung lurus - Persyaratan kinerja
Ballast for tubular fluorescent lamps - Performance requiremenets
IEC 60921 Edition 2.1 Translation SNI IEC 60929:2009
IDT Balast elektronik bertegangan a.b. - Untuk lampu fluoresen tabunbg Persyaratan kinerja
AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements
IEC 60929 {Ed.3.0}. AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements Translation SNI IEC 61195:2009
IDT Lampu fluorescent dengan kaki lampu ganda -Spesifikasi keselamatan
Double-capped fluorescent lamps - Safety specifications
23
Induction fluorescent lamps - Safety specifications (IEC 62532: 2011, IDT)
30
Self-ballast lamps general lighting - Safety requirements (IEC 60 968: 2012, IDT)
22
LED lights self-ballast for general lighting services by voltage> 50 V - Safety specifications (IEC 62 560: 2011, IDT)
25
IEC 61195 Edition 2.0 (1999-10) Double-capped fluorescent lamps - Safety specifications Translation SNI IEC 62532:2015
IDT Lampu induksi fluoresen - Spesifikasi keselamatan (IEC 62532:2011, IDT)
IEC 62532:2011 IDT SNI IEC 60968:2015
Lampu swa-balast penerangan umum - Persyaratan keselamatan (IEC 60968:2012, IDT)
IEC 60968:2012 IDT SNI IEC 62560:2015
Lampu LED swa-balast untuk layanan pencahayaan umum dengan tegangan >50 V - Spesifikasi keselamatan (IEC 62560:2011, IDT)
IEC 62560:2011 IDT SNI IEC 60081:2015
Lampu fluoresen kaki lampu ganda - Spesifikasi kinerja (IEC 60081:2002, IDT)
Dual lamp foot fluorescent lamps - Performance specifications (IEC 60081: 2002, IDT)
184
IEC 60081:2002 IDT SNI 04-0527-1989
Mutu dan cara uji pipa gelas untuk lampu tabung (TL) penggunaan umum
Glass pipe for tubular lamps (TL), General use, Specification and test method
SNI 04-0133-2000
Starter pijar lampu fluoresen
Glow starter for fluorescent lamps
29.140.40
Luminer
SNI IEC 60570:2009
Luminaires Sistem rak suplai listrik untuk luminer
Electrical supply track systems for luminaires
IEC 60570:2009, Electrical supply track systems for luminaires. Translation
7 37
IDT
- 100 -
17
SNI 04-6973.2.5-2005
Luminer - Bagian 2-5: Persyaratan khusus - Luminer lampu sorot
Luminaires - Part 2-5: Particular requirements - Floodlights
9
IEC 60598-2-5: 1998-01 Translation SNI 04-6973.2.3-2005
IDT Luminer - Bagian 2-3: Persyaratan khusus - Luminer untuk pencahayaan jalan umum
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
16
IEC 60598-2-3: 2002 Translation SNI 04-6973.2.2-2005
IDT Luminer - Bagian 2-2: Persyaratan khusus - Luminer tanam
Luminaires - Part 2-2: Particular requirements - Recessed luminaires
9
Luminaires - Part 2-1: Particular requirements - Fixed general purpose luminaires
6
IEC 60598-2-2: 1997 Translation SNI 04-6973.2.1-2005
IDT Luminer - Bagian 2-1: Persyaratan khusus - Luminer magun kegunaan umum
IEC 60598-2-1: 1979 Translation SNI IEC 60598-2-8:2012
IDT Luminer - Bagian 2-8: Persyaratan khusus - Lampu tangan
Luminaires - Part 2-8: Particular requirements - Handlamps
IEC 60598-2-8 ed2.2 Consol. With am1&2 (2007-07) IDT
IDT
SNI IEC 60598-2-4:2012
Luminer - Bagian 2: Persyaratan khusus - Seksi 4: Luminer portabel kegunaan umum
Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires
IEC 60598-2-4 ed2.0 (1997-04) IDT
IDT
SNI IEC 60598-2-20:2012
Luminer - Bagian 2-20: Persyaratan khusus - Rantai cahaya
Luminaires - Part 2-20: Particular requirements - Lighting chains
IEC 60598-2-20 ed3.0 (2010-02) IDT
IDT
SNI IEC 60598-1:2011
Luminer - Bagian 1: Persyaratan dan pengujian
Luminaires - Part 1: General requirements and tests
IEC 60598-1 Ed 7.0 (2008-04) Coversheet SNI IEC 60598-2-4:2012
IDT Luminer Bagian 2: Persyaratan khusus - Seksi 4: Luminer kegunaan umum portabel (IEC 60598-2-4:1997, IDT)
Luminaires Part 2: Particular requirements - Section 4: Portable general purpose luminaires (IEC 60598-2-4: 1997, IDT)
10
Luminaires - Part 2-2: Particular requirements - Luminaires planting (IEC 60598-2-2:2011, IDT)
12
Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting (IEC 60598-2-3:2002 and Amd.1:2011, IDT)
20
Luminaires - Part 2-5: Particular requirements - Floodlights (IEC 60598-2-5:2015, IDT)
16
IEC 60598-2-4: 1997 IDT SNI IEC 60598-2-2:2016
Luminer - Bagian 2-2: Persyaratan khusus - Luminer tanam (IEC 60598-22:2011, IDT)
IEC 60598-2-2:2011 IDT SNI IEC 60598-2-3:2016
Luminer - Bagian 2-3: Persyaratan khusus - Luminer untuk pencahayaan jalan umum (IEC 60598-2-3:2002 dan Amd.1:2011, IDT)
IEC 60598-2-3:2002 and Amd.1:2011 IDT SNI IEC 60598-2-5:2016
Luminer - Bagian 2-5: Persyaratan khusus - Lampu sorot (IEC 60598-25:2015, IDT)
IEC 60598-2-5:2015 IDT SNI IEC 60598-1:2016
Luminer - Bagian 1: Persyaratan umum dan pengujian (IEC 60598-1:2014, IDT)
Luminaires - Part 1: General requirements and tests (IEC 60598-1:2014, IDT)
220
IEC 60598-1:2014 IDT
29.140.99
Standar lain yang berkaitan dengan lampu
SNI IEC 61347-2-3:2011
Other standards related to lamps
Perlengkapan kendali lampu-Bagian 2-3: Persyaratan khusus ballast elektronik disuplai a.b. untuk lampu fluoresen
Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
IEC 61347-2-3 Ed. 1.1 (2004-09) Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps Coversheet SNI IEC 61347-1:2011
IDT Perlengkapan kendali lampu-Bagian 1: Persyaratan umum dan keselamatan
Lamp controlgear - Part 1: General and safety requirements
IEC 61347-1 Ed. 2.0 (2007-01) Coversheet SNI IEC 61347-2-2:2015
IDT Perlengkapan kendali lampu - Bagian 2-2: Persyaratan khusus untuk a.s. atau a.c. yang disuplai konverter penurun tegangan elektronik untuk lampu berfilamen (IEC 61347-2-2:2011, IDT)
Lamp control gear - Part 2-2: Particular requirements for a.s. or a.b. lowering the voltage supplied electronic converters for filament lamps (IEC 61347-2-2: 2011, IDT)
23
DC or AC supplied electronic control gear for LED modules - Performance requirements
17
Lighting control devices - Part 2-13: Particular requirements for equipment supplied as control elekstronik or a.b. for LED modules (IEC 61347-2-13: 2006, IDT)
46
LED modules for general lighting - Performance requirements (IEC / PAS 62717:2011, IDT)
44
IEC 61347-2-2:2011 IDT SNI IEC 62384:2015
Alat kendali elektronik a.s atau a.b. untuk modul LED - Persyaratan kinerja (IEC 62384:2006, IDT)
IEC 62384:2006 IDT SNI IEC 61347-2-13:2015
Alat kendali lampu - Bagian 2-13: Persyaratan khusus untuk peralatan kendali elekstronik yang disuplai a.s. atau a.b. untuk modul LED (IEC 613472-13:2006, IDT)
IEC 61347-2-13: 2006 IDT SNI IEC/PAS 62717:2015
Modul LED untuk penerangan umum - Persyaratan kinerja (IEC/PAS 62717:2011, IDT)
IEC/PAS 62717:2011 IDT
29.160
Rotating machinery
Mesin berputar
SNI IEC 60034-1:2009
Mesin Listrik berputar - Bagian 1: Pengenal dan Kinerja
Rotating electrical machines - Part 1: Rating and performance
75
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
15
IEC 60034-1:2009, Rotating electrical machines - Part 1: Rating and performance Translation SNI IEC 60034-14:2009
IDT Mesin Listrik berputar - Bagian 14: Getaran mekanis mesin tertentu dengan ketinggian poros 56 mm dan lebih tinggi - Pengukuran evaluasi dan batas kuat getar
IEC 60034-14:2009, Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity Translation
IDT
- 101 -
SNI IEC 60034-3:2009
Mesin Listrik Berputar - Bagian 3: Persyaratan Khusus Mesin sinkron Rotor Silindris
Rotating electrical machines - Part 3: Specific requirements for cylindrical rotor synchronous machines
25
IEC 60034-3:2009, Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines Translation SNI IEC 60034-9:2009
IDT Mesin Listrik berputar - Bagian 9: Batas Kebisingan
Rotating electrical machines - Part 9: Noise limits
9
IEC 60034-9:2009, Rotating electrical machines - Part 9: Noise limits Translation SNI IEC 60034-11:2011
IDT Mesin listrik berputar-Bagian 11: Proteksi termal
Rotating electrical machines - Part 11: Thermal protection
IEC 60034–11 Ed.2 (2004-07) Translation SNI IEC 60034-8:2015
IDT Mesin listrik berputar - Bagian 8: Penandaan terminal dan arah rotasi (IEC 60034-8:2007, IDT)
Rotating electrical machines - Part 8: Marking of terminals and direction of rotation
34
IEC 60034-8:2007 IDT SNI IEC 60034-4:2014
Mesin listrik berputar - Bagian 4: Metode untuk menentukan besaran mesin sinkron dari pengujian (IEC 60034-4:2008, IDT)
Rotating electrical machines - Part 4: Methods for determining synchronous machine quantities from tests (IEC 60034-4: 2008, IDT)
SNI IEC 60034-2-2:2014
Mesin listrik berputar - Bagian 2-2: Metode spesifik untuk menentukan rugirugi secara terpisah untuk mesin besar dari pengujian - Suplemen untuk SNI IEC 60034-2-1 (IEC 60034-2-2:2010,IDT)
Rotating electrical machines - Part 2-2: Methods specific to determine the loss separately for large machines from tests - Supplement to IEC 60034-2-1 (IEC 60034-2-2: 2010, IDT)
SNI 7857:2013
Mesin listrik berputar - Bagian 30: Kelas efisiensi motor induksi sangkar, fase-tiga, kecepatan tunggal (kode-IE)
Rotating electrical machines - Part 30: Class efficiency of cage induction motors, threephase, single speed (IE-code)
101
SNI IEC 60334-30-1:2016
Mesin listrik berputar - Bagian 30-1: Kelas efisiensi motor a.b. yang dioperasikan langsung terhubung ke jaringan listrik (kode IE) (IEC 60034-301:2014, IDT)
Rotating electrical machines - Part 30-1: motor efficiency classes A.B. operated directly connected to the power grid (IE code) (IEC 60034-30-1:2014, IDT)
24
Rotating electrical machines - Part 31: Selection of energy efficient motors including variable speed applications - Guidelines for the application (IEC/TS 60034-31:2010, IDT)
36
IEC 60034-30-1:2014 SNI IEC/TS 6033431:2016
IDT Mesin listrik berputar - Bagian 31: Pemilihan motor dengan energi efisien termasuk aplikasi kecepatan variabel - Pedoman aplikasi (IEC/TS 6003431:2010, IDT)
IEC/TS 60034-31:2010 IDT
29.160.01
Mesin berputar secara umum
Rotating machinery in general
SNI 04-3577-1994
Klasifikasi tingkat perlindungan selungkup untuk mesin listrik berputar
Enclosure for rotating electrical machines, classification for degree of protection
SNI 04-3864-1995
Dimensi dan keluaran pengenal mesin listrik berputar berkaki pemasangan dengan nomor rangka 355 sampai dengan 1000
Dimension and rated output of rotating electrical machinery with mounting flange, frame numbers 355 to 1000
SNI 04-6189-1999
Pengukuran resistansi belitan mesin arus bolak-balik pada keadaan beroperasi pada tegangan bolak-balik
Measurements of winding resistance of an alternating current machines during operation at alternating voltage
14
SNI 04-0918.9-2002
Mesin listrik berputar - Bagian 9: Batas kebisingan
Rotating electrical machines - Part 9: Noise limit
10
Rotating electrical machines - Part 18 :Fungsional evaluation from isolation system Section 31 : Testing procedures for twisted-roll - Termal evaluation and isolation system classification used for map to 50 MVA and 1chine u
18
25 8
IEC 34-9: 1997-01 Amandemen 1 (1995-01), Rotating electrical machines Translation SNI 04-0918.18.31-2000
MOD Mesin listrik berputar - Bagian 18 : Evaluasi fungsional dari sistem isolasi Seksi 31 : Prosedur uji untuk belitan gulung - Evaluasi termal dan klasifikasi dari sistem isolasi yang digunakan dalam mesin sampai dengan 50 MVA dan 15 Kv
IEC 60034-18-31:1992, Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 31: Thermal evaluation and classification of insulation system used in machines up to including 50 MVA and 15 kV Translation SNI IEC 60034-18-1:2011
MOD Mesin Listrik Berputar – Bagian 18: Evaluasi Fungsional Sistem Insulasi – Seksi 1 : Petunjuk Umum
Rotating electrical machines – Part 18: Functional evaluation of insulation system - Section 1 : General guidelines
IEC 60034-18-1 (1992-02) Translation SNI 04-0918.2A-2000
IDT Mesin listrik berputar - Bagian 2A: Metode untuk menentukan rugi-rugi dan efisiensi mesin listrik berputar berdasarkan pengujian (tidak termasuk mesin untuk kendaraan traksi ) - Penentuan rugi-rugi dengan metode kalorimetrik
Rotating electrical machines - Part 2A: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) Measurements of losses by calorimetry
28
IEC 34-2A 1972, Rotating electrical machinery. Methods for determining losses and efficiency of rotating electrical machinery from test (excluding machines for traction) SNI 04-0918.1-2001 SNI 04-0918.18.21-2001
IDT Mesin listrik berputar - Bagian 1: Pengenal dan unjuk kerja
Rotating electrical machines - Part 1: Rating and performance
69
Mesin listrik berputar - Bagian 18: Evaluasi fungsi sistem isolasi - Pasal 21: Prosedur uji evaluasi termal dan klasifikasi untuk kawat kumparan belitan
Rotating electrical machines - Part 18: Functional evaluation of insulation system - Part 21: Test procedures of thermal evaluation and classification for wire wound windings
41
IEC 34-18-21: 1992, Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification Translation SNI 04-0918.18.31-2001
IDT Mesin listrik berputar - Bagian 18: Evaluasi fungsional dari sistem isolasi Seksi 31: Prosedur uji untuk belitan-gulung - Evaluasi termal dan klasifikasi dari sistem isolasi yang digunakan dalam mesin sampai dengan 50 MVA dan 15 kV
Rotating electrical machines - Part 18: Functional evaluation of isolation system - Section 31: Test methods for coil- roll - Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV
18
IEC 34-18-31: 1992, Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 31: Thermal evaluation and classification of insulation systems used in machines up to and including 50 MVA and 15 kV Translation SNI 04-0918.22-2000
IDT Mesin listrik berputar - Bagian 22: Generator arus bolak-balik (a.b.b) dengan penggerak motor bakar
Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion engine
20
IEC 34-22 : 1996, Rotating electrical machines - Part 22 : AC generators for reciprocating internal combustion (RIC) engines driven generating sets Translation
MOD
SNI 04-0918.3-2001
Mesin listrik berputar - Bagian 3: Persyaratan khusus mesin sinkron jenis yang terpasang pada turbin
Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines
19
SNI 04-0918.8-2001
Mesin listrik berputar - Bagian 8: Penandaan terminal dan arah putaran mesin berputar
Rotating electrical machines - Part 8: Terminal markings and direction of rotating machines
25
IEC 60034-8: 1972 Amendment 1: 1990 Amendment 2: 1996-11, Rotating electrical machines - Part 8: Terminal markings and direction of rotating machines Translation SNI 04-0918.18.33-2001
IDT Mesin listrik berputar - Bagian 18: Evaluasi uji sistem isolasi - Pasal 33: Prosedur uji untuk belitan kawat persegi - Evaluasi multifaktor kemampuan sistem isolasi gabungan di bawah tekanan termal dan listrik yang digunakan pada mesin >=50 MVA dan 15 kV
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor function evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV
IEC 34-18-33: 1995, Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor function evaluation Endurance under combined thermal and electrical stresses of i Translation
IDT
- 102 -
21
SNI 04-0918.15-2001
Mesin listrik berputar - Bagian 15: Tingkat ketahanan mesin listrik berputar a.b.b. terhadap tegangan impuls dengan bentuk lilitan stator jenis gelung
Rotating electrical machines - Part 15: Impulse voltage with stand level of rotating a.c. machines with from-wound stator coils
6
IEC 60034-15: 1995, Rotating electrical machines - Part 15: Impulse voltage with stand level of rotating a.c. machines with from-wound stator coils Translation SNI 04-1632-1989
29.160.10
IDT Unjuk kerja sistem pengaman termal untuk mesin listrik berputar
Thermal protection system for rotating electrical machinery, Performance
Komponen untuk mesin berputar
4
Components for rotating machines
SNI 04-1930.3-1995
Pedoman bagi peralatan elektromekanik untuk pusat listrik tenaga minihidro (PLTM) - Bagian 3: Pemeriksaan, penyerahan dan pemeliharaan
Manual for electromechanic equpment for microydro electric power plants - Part 3: Inspection, delivery and maintenance
9
SNI 04-1930-1990
Pedoman peralatan elektromekanik untuk Pusat Listrik Tenaga Minihidro (PLTM) Bagian 1 : Uraian rencana dan kondisi operasi instalasi dari pusat pembangkit
Guide for electromechanical apparatus for Minihydro Electric Power Plant. Part 1 : Planning description and operational condition of installation of generating station
27
29.160.20
Generator
Generators
SNI 04-1868-1990
Generator las karbid sederhana yang dapat dipindah-pindahkan
Portable carbide welding generator
SNI 04-1077-1989
Generator sinkron, Cara Uji
Synchronous generator, Test methods
29.160.30
Motor
SNI IEC 60034-12:2011
7 18
Motors Mesin listrik berputar-Bagian 12: Kinerja pengasutan motor induksi sangkar fase tiga kecepatan tunggal
Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
IEC 60034–12 Ed.2.1 (2007-09) Translation
IDT
SNI 04-1631-1989
Asut motor induksi rotor sangkar tiga fasa berkecepatan tunggal dengan tegangan sampai 660 V disain N dan NY, Unjuk kerja
Starter of free phases quick cage induction motor, single speed with voltage up to 660 V, N and NY design, Performance
6
SNI 04-0918.17-2000
Mesin listrik berputar - Bagian 17: Petunjuk pemakaian motor induksi rotor sangkar yang disuplai dari konventer
Rotating electrical machines - Part 17: Application guide for cage induction motor where fed from converters
8
IEC 34-17 :1992, Rotating electrical machines - Part 17: Cage induction motors wher fed from converters - Application guide Translation
MOD
SNI 04-0917-1989
kVA mula (starting) dari motor-motor induksi, Klasifikasi
Starting kVA for induction motor, Classification
SNI 04-1693-1989
Mesin sinkron, Pendinginan
Sinchronous machinery, Cooling
SNI 04-1469-1989
Komponen dan mesin listrik, Arti simbol
Electric components and machinery, Symbols
SNI 04-1473-1989
Persyaratan umum motor listrik bagi mesin peralatan pabrik
Electric motor for industrial machinery, General rules
SNI 04-1224-1989
Motor induksi tiga fasa dengan daya sampai dengan 100 kWh, Cara uji
Three phase induction motors with power up to 100 kW, Methods of test
29.180
3 25 4 3 21
Transformers. Reactors
Transformator Reaktor
SNI 04-3858-1995
Transformator tenaga jenis kering
Dry-type power transformers
19
SNI 04-3859-1995
Pedoman pembebanan transformator tenaga jenis kering
Loading guide for dry-type power tranformers
28
SNI 04-3587-1994
Transformator tenaga Bagian 5: Kemampuan menahan hubung singkat
Power transformator Part 5: Ability to withstand short circuit
13
SNI 04-3586-1994
Transformator tenaga Bagian 3.1: Tingkat isolasi dan uji dielektrik jarak bebas luar di udara
Power transformator Part 3.1: Insulation level and dielectric test external clearances in air
12
SNI 04-3904.2-1995
Transformator tenaga. Bagian 2 : Kenaikan suhu
Power transformers. Part 2 : Temperature rise
14
SNI 04-3904.4-1995
Transformator tenaga. Bagian 4 : Sadapan dan hubungan
Power transformers. Part 4 : Tapping and connection
16
SNI 04-3585-1994
Transformator tenaga Bagian 3: Tingkat isolasi dan uji dielektrik
Power transformator Part 3: Insulation level and dielectric test
35
SNI 04-3857-1995
Pedoman pembebanan untuk transformator terendam minyak
Loading guide for oil-immersed transformers
30
SNI 04-3870-1995
Pedoman penerapan untuk transformator tenaga
Application guide for power transformers
30
SNI 04-6954.1-2003
Transformator tenaga - Bagian 1: Umum
Power transformers - Part 1: General
48
Safety of power transformers, power supply units and the similar - Part 2-17: Particular requirements for transformers for switch mode power supplies
13
IEC 60076-1: 2000-04, Power transformers - Part 1 : General Translation SNI 04-6280.2.17-2002
IDT Keselamatan transformator tenaga, unit suplai daya dan sejenisnya - Bagian 2-17: Persyaratan khusus transformator untuk suplai tenaga mode sakelar
IEC 61558-2-17: 1997, Safety of power transformers, power supply units and similar - Part 2-17 : Particular requirements for transformers for switch mode power supplies Translation SNI 04-6280.2.7-2001
MOD Keselamatan transformator tenaga, unit suplai daya dan sejenisnya - Bagian 2.7: Persyaratan khusus untuk transformers mainan
Safety of power transformers, power suply and similar - Part 2.7: Particular requirements for transformers for toys
12
IEC 61558-2-7: 1997, Safety of power transformers, power suply and similar - Part 2.7: Particular requirements for transformers for toys Translation SNI 04-6280.2.6-2001
IDT Keselamatan transformator tenaga, unit suplai daya dan sejenisnya - Bagian 2.6: Persyaratan khusus transformator isolasi pengaman untuk penggunaan umum
Safety of power transformers, power suply units and similar - Part 2.6: Particular requirements for safety isolating transformers for general use
13
IEC 61558-2-6: 1997, Safety of power transformers, power suply units and similar - Part 2.6: Particular requirements for safety isolating transformers for general use Translation SNI 04-6280.2.5-2001
IDT Keselamatan transformator tenaga kecil, unit suplai tenaga dan sejenisnya Bagian 2.5: Persyaratan khusus untuk transformator alat cukur dan unit suplai alat cukur
Safety of small power transformers, power supply units and similar - Part 2-5: Particular requirements for shaver transformers and shaver supply units
14
IEC 61558-2-5: 1997, Safety of small power transformers, power supply units and similar - Part 2.5: Particular requirements for shaver transformers and shaver supply units Translation SNI 04-6280.2.4-2001
IDT Keselamatan transformator tenaga, unit suplai daya dan sejenisnya - Bagian 2.4: Persyaratan khusus transformator isolasi untuk penggunaan umum
Safety of power transformer, power supply units and similar - Part 2.4: Particular requirements for insulating transformers for general use
9
IEC 61558-2-4: 1997, Safety of power transformers, power supply units and similar - Part 2.4: Particular requirements for insulating transformers for general use Translation SNI 04-6280.2-2000
IDT Keselamatan untuk transformator tenaga, unit suplai daya dan sejenisnya. Bagian 2: Persyaratan khusus transformator terpisah untuk penggunaan umum
Safety of power transformers, power supply units and similar. Part 2: Particular requirements for separating transformers for general use
7
IEC 61558-2: 1997, Safety of power transformers, power supply units and similar - Part 2: Particular requirements for separating transformers for general use Translation SNI 04-6279.1-2000
IDT Keselamatan untuk transformator tenaga, unit suplai tenaga dan sejenisnya Bagian 1: Persyaratan umum dan pengujian transformers, power supply units and the similar. Part 1: General requirment and tes
Safety of power
IEC 61558-1: 1997, Safety of power transformers, power supply units and similar - Part 1: General requirements and tests Translation
IDT
- 103 -
53
SNI 04-6188.2-1999
Transformator instrumen. Bagian 2: Transformator tegangan induktif
Instrument transformers. Part 2: Inductive voltage transformers
43
SNI 04-6280.2.8-2001
Keselamatan transformator tenaga kecil, unit suplai daya dan sejenisnya Bagian 2.8: Persyaratan khusus untuk transformator bel dan genta
Safety of small power transformers, power supply units and similar - Parts 2.8: Particular requirements for bell and chime transformers
11
IEC 61558-2-8: 1998, Safety of small power transformator, power supply units and similar - Part 2.8: Particular requirements for bell and chime transformers Translation SNI IEC 60076-11:2009
IDT Tranformator Tenaga - Bagian 11 : Tranformator Jenis-Kering
Power transformers - Part 11: Dry-type transformers
33
Power transformers - Part 2: Temperature rises
29
Power transformers - Part 10: Determination of sound levels
29
Power transformers - Part 7: Loading guide for oil-immersed power transformers
47
Power transformers - Part 8: Application guide
78
IEC 60076-11:2009, Power transformers - Part 11: Dry-type transformers Translation SNI 04-6954.2-2004
IDT Transformator tenaga - Bagian 2: Kenaikan suhu
IEC 60076-2: 1993-04 Translation SNI IEC 60076-10:2009
IDT Transformator Tenaga - Bagian 10: Penentuan tingkat bunyi
IEC 60076-10:2009, Power transformers - Part 10: Determination of sound levels Translation SNI IEC 60076-7:2009
IDT Tranformator tenaga - Bagian 7: Pedoman Pembebanan untuk transformator tenaga yang terendam minyak
IEC 60076-7:2009, Power transformers - Part 7: Loading guide for oil-immersed power transformers Translation SNI IEC 60076-8:2009
IDT Tranformator Tenaga - Bagian 8 : Pedoman Penerapan
IEC 60076-8:2009, Power transformers - Part 8: Application guide Translation SNI IEC 60076-10-1:2010
IDT Transformator daya - Bagian 10-1: Penentuan tingkat bunyi - Pedoman penerapan
Power transformers - Part 10-1: Determination of sound levels - Application guide
IEC 60076-10-1ED 1.0 (2005-10) Translation SNI IEC 60289:2009
IDT Reaktor
Reactors
44
IEC 60335-1:2009, Household and similar electrical appliances - Safety - Part 1: General requirements Translation SNI IEC 60076-5:2012
IDT Transformator daya - Bagian 5: Kemampuan menahan hubung-pendek
Power transformers - Part 5: Ability to withstand short circuit
IEC 60076-5: 2006 IDT SNI IEC 60076-4:2011
IDT Transformator daya - Bagian 4: Pedoman pengujian impuls petir dan impuls penyakelaran – Transformator daya dan reaktor
Power transformer – Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers and reactors
IEC 60076-4 (2002-06) Power transformer – Part 4: Guide to the lightning impulse and switching impulse testing – Power transformers and reactors Translation SNI IEC 60076-15:2015
IDT Transformator daya - Bagian 15: Transformator daya terisi gas (IEC 6007615:2008, IDT)
Power transformers - Part 15: gas filled power transformers
27
Insulated bushing for alternating voltages above 1000 V
59
IEC 60076-15:2008 IDT SNI IEC 60137:2013
Busing berinsulasi untuk arus bolak-balik voltase di atas 1000 V
IEC 60137:2009 Translation
IDT
SNI IEC 60076-2:2014
Transformator daya - Bagian 2: Kenaikan suhu untuk transformator terendam cairan (IEC 60076-2:2011, IDT)
Power transformers - Part 2: Temperature rise for liquid immersed transformers (IEC 60076-2: 2011, IDT)
SNI IEC 60076-13:2011
Transformator Daya – Bagian 13: Transformator swaproteksi terendam cairan
Power Transformers – Part 13: Self-protected liquid-filled transformers
IEC 60076-13 (2006-05) Power Transformers – Part 13: Self-protected liquid-filled transformers Translation SNI IEC 60079-14:2013
IDT Atmosfer ledak - Bagian 14: Desain, pemilihan dan pemasangan instalasi listrik
Explosive atmospheres Part 14: Electrical installations design, selection and erection
101
IEC 60079-14:2007 Translation SNI IEC 60076-1:2013
IDT Transformator daya - Bagian 1: Umum
Power transformers - Part 1: General
79
Power transformers - Part 3: Level of insulation, dielectric tests and external clearances in air (IEC 60076-3:2013, IDT)
64
IEC 60076-1:2011 Translation SNI IEC 60076-3:2016
IDT Transformator daya - Bagian 3:Tingkat insulasi, uji dielektrik dan jarak bebas eksternal di udara (IEC 60076-3:2013,IDT)
IEC 60076-3:2013 IDT SNI IEC 60076-14:2016
Transformator daya - Bagian 14:Transformator daya terendam cairan menggunakan bahan insulasi suhu tinggi (IEC 60076-14:2013,IDT)
Power transformers - Part 14: liquid immersed power transformers using high-temperature insulation materials (IEC 60076-14:2013, IDT)
IEC 60076-14:2013 IDT SNI 04-0204-1987
Transformator tegangan tinggi, Spesifikasi
High voltage transformer, Specification
30
SNI 04-1920-1990
Transformator arus
Current transformers
48
SNI 04-0200-1987
Transformator daya
Power transformer
32
SNI 04-0203-1987
Transformator distribusi, Spesifikasi
Distribution transformers. Specification
14
SNI 04-1919-1990
Transformator tegangan
Voltage transformers
69
SNI 04-0919-1989
Transformator distribusi terendam minyak bertegangan pengenal primer tunggal sampai dengan 24 kV
Oil immersed distribution transformers single primary voltage up to 24 kV
17
SNI 04-1226-1989
Transformator catu daya peralatan elektronika
Power transformer for electronic equipment
16
29.200
Rectifiers. Converters. Stabilized power supply
Penyearah. Konvertor. Suplai tenaga yang distabilk
SNI 04-3680-1995
Catu daya sakelar elektronik (Switching Power Supply/SPS) untuk komputer pribadi PC
Switching power supply for personal computer
13
SNI 04-3592-1994
Catu daya yang distabilkan dengan keluaran ABB
Stabilized power supply with ac output
29
SNI 04-3263-1994
Catu daya kebal gangguan statis arus bolak-balik sinusoidal
Sinusoidal alternating current uninterupted power supply
14
- 104 -
SNI IEC 60335-2-29:2012
Peranti listrik rumah tangga dan sejenis - Keselamatan - Bagian 2-29: Persyaratan khusus untuk pengisi baterei
Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
IEC 60335-2-29 ed4.2 Consol. With am1&2 (2010-03) IDT
IDT
SNI IEC 62040-2:2016
Sistem catu daya tak putus (UPS) - Bagian 2: Kesesuaian kompatibilitas elektromagnetik (EMC) (IEC 62040-2:2005, IDT)
Unbroken power supply systems (UPS) - Part 2: Suitability of electromagnetic compatibility (EMC) (IEC 62040-2:2005, IDT)
45
Unbroken power supply systems (UPS) - Part 1: General requirements and safety for UPS (IEC 62040-1:2008, IDT)
72
The term for the transmission of high voltage direct current (HVDC) (IEC 60 633: 2009,
35
Power convertors for electric traction - Part 3: Self commutated convertors for one-phase traction
34
IEC 62040-2:2005 IDT SNI IEC 62040-1:2016
Sistem catu daya tak putus (UPS) - Bagian 1: Persyaratan umum dan keselamatan untuk UPS (IEC 62040-1:2008, IDT)
IEC 62040-1:2008 IDT SNI IEC 60633:2015
Istilah untuk transmisi arus searah tegangan tinggi (ASTT) (IEC 60633:2009,IDT)
IEC 60633:2009 IDT SNI 04-6919.3-2002
29.220
Konverter daya untuk traksi listrik - Bagian 3: Konverter berkomutasi sendiri untuk traksi fase-satu
Galvanized cell and batteries
Sel galvanis dan batere
29.220.01
Sel galvanis dan batere secara umum
SNI 06-2585-1992
29.220.10
Galvanic cells and batteries in general
Amonium klorida untuk batere kering
Ammonium chloride for dry batteries
Sel dan batere primer
SNI 04-2051.1-2004
5
Primary cells and batteries
Baterai primer - Bagian 1: Umum
Primary batteries - Part 1: General
46
Primary batteries - Part 2: Physical and electrical specifications
50
Primary batteries - Part 3: Watch batteries
27
Primary batteries - Part 4: Safety of lithium batteries
39
Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
39
Primary batteries - Part 1: General (IEC 60086-1: 2011, IDT)
52
Primary batteries - Part 2: Physical and electrical specifications (IEC 60886-2: 2011, IDT)
59
IEC 60086-1: 2000 Translation SNI 04-2051.2-2004
IDT Baterai primer - Bagian 2: Spesifikasi fisik dan listrik
IEC 60086-2: 2000 Translation SNI IEC 60086-3:2013
IDT Baterai primer - Bagian 3: Baterai Arloji
IEC 60086-3:2004 Translation SNI IEC 60086-4:2013
IDT Baterai primer - Bagian 4: Keselamatan baterai litium
IEC 60086-4:2007 Translation SNI IEC 60086-5:2013
IDT Baterai primer - Bagian 5: Keselamatan baterai dengan elektrolit cair
IEC 60086-5:2005 Translation SNI IEC 60086-1:2015
IDT Baterai primer - Bagian 1: Umum (IEC 60086-1:2011, IDT)
IEC 60086-1:2011 IDT SNI IEC 60086-2:2015
Baterai primer - Bagian 2: Spesifikasi fisik dan listrik (IEC 60886-2:2011, IDT)
IEC 60886-2:2011 IDT
29.220.20
Sel dan batere sekunder asam
Acid secondary cells and batteries
SNI 04-2006-1990
Elektrolit asam sulfat untuk batere asam timbal
Sulphuric acid electrolyte for lead acid batteries
16
SNI 04-2005-1990
Air untuk batere asam timbal dan batere alkali
Water for lead acid batteries and alkaline batteries
14
SNI 09-4326-1996
Batere sepeda motor
Batteries for motor cycle
12
SNI 04-1998-1990
Air suling untuk baterai asam timbal dan bateri alkali
Distilled water for lead acid batteries and alkaline batteries
15
SNI 04-6258.4-2000
Batere starter timah hitam - Bagian 4: Dimensi batere untuk kendaraan berat
Lead - acid starter baterries - Part 4: Dimensions of batteries for heavy trucks
6
IEC 95-4: 1989, Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy trucks Translation
IDT
SNI 04-3636-1994
Bateri asam timbal stasioner untuk catu daya sistem penyangga
Stationer lead-acid batteries for suporting system phase capacity
SNI 0038:2009
Aki untuk kendaraan bermotor roda empat atau lebih
Lead acid batteries for four wheels vehicles or more
SNI 04-0856-1989
Batere asam timbal stasioner
Stationery lead - acid batteries
SNI 04-1901-1990
Asam aki
Accumulator acid
4
SNI 04-1900-1990
Air aki
Refill water for storage batteries
2
29.220.30
Sel dan batere sekunder alkali
25
14
Alkaline secondary cells and batteries
SNI 04-1997-1990
Baterai alkali nikel kadmium stasioner untuk catu daya cara charge discharge
Cadmium nickel alkaline stationery batteries for charge discharge power supply
23
SNI 04-6391-2000
Battery charge regulator (BCR) - Prosedur uji dan persyaratan elektris
Battery charge regulator (BCR) - Test procedures and electrical requirements
13
SNI 04-6392-2000
Sel dan baterai sekunder untuk penggunaan sistem pembangkit listrik fotovoltaik individual - Persyaratan umum dan metode pengujian
Secondary cells and batteries for individual photovoltaic electric power generating system General requirement and method of tests
11
SNI IEC 61951-2:2015
Sel dan baterai sekunder yang mengandung alkali atau elektrolit non-asam lainnya - Sel tunggal isi ulang tersegel jinjing - Bagian 2: Nikel-logam-hibrida (IEC 61951-2:2011, IDT)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2: Nickel-metal hydride
35
IDT Sel dan baterai sekunder yang mengandung alkali atau elektrolit non-asam lainnya - Sel tunggal isi ulang tersegel jinjing - Bagian 1: Nikel kadmium (IEC 61951-1:2015, IDT)
Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1: Nickel-cadmium
37
IEC 61951-2:2011 SNI IEC 61951-1:2015
IEC 61951-1:2013 IDT
- 105 -
SNI IEC 62133:2015
Sel dan baterai sekunder yang mengandung alkali atau elektrolit non asam lainnya - Persyaratan keselamatan untuk sel sekunder tertutup dan untuk baterai yang dibuat dari bahan tersebut untuk aplikasi jinjing (IEC 62133:2012, IDT)
Secondary cells and batteries containing alkaline or non-acidic electrolytes other - Safety requirements for secondary cell covered and for batteries made from such materials for portable applications (IEC 62133:2012, IDT)
40
Alkaline electrolyte for alkali nickel cadmium batteries
20
IEC 62133:2012 IDT SNI 04-2015-1990
29.220.99
Elektrolit alkalin untuk batere alkalin nikel kadmium
Sel dan batere lainnya
SNI IEC 61960:2015
Other cells and batteries
Sel dan baterai sekunder yang mengandung alkali atau elektrolit non-asam lainnya - Sel lithium dan baterai sekunder untuk aplikasi jinjing (IEC 61960:2011, IDT)
Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications
19
IEC 61960:2011 IDT
29.240
Power distribution networks
Jaringan distribusi tenaga
SNI IEC/TR 60919-3:2012
Kinerja Arus Searah Tegangan Tinggi (ASTT) Sistem dengan konverter saluran terkomutasi – Bagian 3: Kondisi Dinamis
Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 3: Dynamic conditions
IEC/TR 60919-3: 2009 IDT
IDT
SNI IEC/TR 60919-1:2012
Kinerja Arus Searah Tegangan Tinggi (ASTT) Sistem dengan konverter saluran terkomutasi – Bagian 1: Keadaan tunak
Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 1: Steady-state conditions
IEC/TR 60919-1: 2010 IDT
IDT
SNI IEC/TR 60919-2:2012
Kinerja Arus Searah Tegangan Tinggi (ASTT) Sistem dengan konverter lin terkomutasi – Bagian 2: Gangguan dan penyaklaran
Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 2: Faults and switching
IEC/TR 60919-2: 2008 IDT
IDT
SNI IEC 61643-11:2016
Gawai proteksi surja tegangan rendah - Bagian 11: Gawai proteksi surja yang terhubung dengan sistem daya tegangan rendah - Persyaratan dan metode uji (IEC 61643-11:2011, IDT)
Low-voltage surge protective devices - Part 11: Surge protective devices connected to lowvoltage power systems - Requirements and test methods
IEC 61643-11:2011 IDT
29.240.01
Jaringan distribusi tenaga secara umum
Power distribution networks in general
SNI 04-3879-1995
Gangguan pada sistem suplai yang diakibatkan oleh piranti listrik dan perlengkapannya
Disturbances in supply systems caused by household appliances and electrical equipment
34
SNI 04-6545.5-2001
Keselamatan listrik dalam sistem distribusi tegangan rendah sampai dengan 1000 V a.b.b. dan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantauan terhadap pengukuran yang bersifat proteksi - Bagian 5: Resistans ke bumi
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing measuring or monitoring of protective measures - Part 5: Resistans to earth
9
IEC 61557-5: 1997, Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing measuring or monitoring of protective measures - Part 5: Resistans to earth Translation SNI 04-6545.4-2001
MOD Keselamatan listrik dalam sistem distribusi tegangan rendah sampai dengan 1000 V a.b.b. dan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantauan terhadap pengukuran yang bersifat proteksi - Bagian 4: Resistans hubungan bumi dan ikatan ekipotensial
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
8
IEC 61557-4: 1997, Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding Translation SNI 04-6545.1-2001
MOD Keselamatan listrik pada sistem distribusi tegangan rendah sampai dengan 1000 V a.b.b. dan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantau dari tindakan pengamanan - Bagian 1: Persyaratan umum
Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements
20
IEC 61557-1: 1997, Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements Translation SNI 04-6545.2-2001
IDT Keselamatan listrik pada sistem distribusi tegangan rendah sampai dengan 1000 V a.b.b. dan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantauan dari tindakan pengamanan - Bagian 2: Resistansi isolasi
Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective meaures - Part 2: Insulation resistance
8
IEC 61557-2: 1997, Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective meaures - Part 2: Insulation resistance Translation SNI 04-6545.3-2001
IDT Keselamatan listrik pada sistem distribusi tegangan rendah sampai dengan 1000 V a.b.b. dan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantauan dari tindakan pengamanan -Bagian 3 : Impedans lingkar
Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance
8
IEC 61557-3: 1997, Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance Translation SNI 04-6545.6-2002
IDT Keselamatan listrik pada dalam sistem distribusi tegangan rendah sampai dengan 1000 Va.b.b dan 1500 V a.s - Perlengkapan untuk pengujian, pengukuran atau pemantauan terhadap proteksi. Bag 6: Gawai arus sisa (GAS) dalam sistem TT dan TN
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) in TT and TN
9
IEC 61557:1997, Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD) in TT and TN system Translation SNI 04-6545.7-2003
MOD Keselamatan listrik dalam sistem distribusi tegangan rendah sampai dengan 1000 V a.b. sampai dengan 1500 V a.s. - Perlengkapan untuk pengujian, pengukuran atau pemantauan terhadap pengukuran yang bersifat proteksi Bagian 7: Urutan fase
Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V a.s Equipment for testing, measuring of monitoring of protective measures - Part 7: Phase sequance
9
IEC 61557-7: 1997-02, Electrical safety in low voltage distribution systems up to 1000V a.c - Equipment for testing, measuring of monitoring of protective measures - Part 7 : Phase sequence Translation SNI 04-6545.8-2003
MOD Keselamatan listrik dalam sistem distribusi tegangan rendah sampai dengan 1000 V a.b. dan 1500 V a.s - Perlengkapan untuk pengujian , pengukuran atau pemantauan terhadap pengukuran yang bersifat proteksi - Bagian 8: Gawai monitoring isolasi untuk sistem IT
Electrical safety in low voltage distribution system up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring, or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
12
IEC 61557-8: 1997-02, Electrical safety in low voltage distribution systems up to 1000V a.c. and 1500V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8 : Insulation monitoring devices for IT systems Translation SNI 04-1987-1990
MOD Penyangga kabel
Cable support
- 106 -
17
SNI 04-1705-1989
Keandalan sistem distribusi
Distribution system, Realibility
19
SNI 04-1926-1990
Jaringan distribusi listrik pedesaan
Rural electrical distribution network
34
SNI 13-6674-2002
Persyaratan tiang penyangga jaringan listrik di tambang hidrolik
Specification of electrical network support poles at hydraulic mining
29.240.10
Substasiun listrik Penangkal petir
SNI 04-6289.3-2000
7
Substations. Surge arresters
Arester surya. Bagian 3: Uji tiruan arester surya
Surge arresters. Part 3: Artificial pollution testing of surge arresters
11
Surge arresters - Part 5: Selection and application recommendation
66
IEC 99-3: 1990, Surge arresters - Part 3: Artificial pollution testing of surge arresters Translation SNI 04-6289.5-2002
IDT Arester surja - Bagian 5: Rekomendasi pemilihan dan penerapan
IEC 60099-5: 1991, Surge arresters - Part 5: Selection and application recommendation Translation
MOD
SNI IEC 60099-5:2014
Arester surja - Bagian 5: Rekomendasi pemilihan dan penerapan (IEC 600995:2000,IDT)
Surge arrester - Part 5: Recommendations selection and application (IEC 60099-5: 2000, IDT)
SNI IEC 61643-11:2015
Gawai proteksi surja voltase rendah - Bagian 11: Gawai proteksi surja yang terhubung dengan sistem tenaga voltase rendah - Persyaratan dan metode uji (IEC 61643-11:2011, IDT)
Low voltage surge protective devices - Part 11: surge protective devices connected to lowvoltage power systems - Requirements and test methods (IEC 61643-11: 2011, IDT)
102
IEC 61643-11:2011 IDT
29.240.20
Saluran distribusi tenaga
Power distribution lines
SNI 04-3882-1995
Pembebanan penyangga saluran udara. Bagian 1: Umum
Overhead line support loadings. Part 1: General
SNI 04-3884-1995
Pembebanan penyangga saluran udara. Bagian 3: Pembebanan khusus
Overhead line support loadings. Part 3: Specific loadings
SNI 04-3855-1995
Pembumian jaringan tegangan rendah dan instalasi tegangan rendah
Earthing for low voltage network and low voltage installation
13
SNI 04-3853-1995
Spesifikasi desain untuk jaringan tegangan menengah dan jaringan tegangan rendah
Design specification for high voltage and low voltage network
12
SNI 04-3883-1995
Pembebanan penyangga saluran udara. Bagian 2: Pengaruh angin dan suhu
Overhead line support loadings. Part 2: Wind and temperature loadings
22
SNI 04-6960-2003
Saluran udara - Persyaratan dan pengujian untuk spaser
Overhead lines - Requirements and tests for spacers
39
Coupling devices for power line carrier systems - Section 1: General
19
11 8
IEC 61854: 1998-09, Overhead lines - Requirements and tests for spacers Translation SNI 04-6529.1-2001
MOD Gawai kopling untuk sistem pembawa sinyal pada saluran daya (PLC) Seksi 1: Umum
IEC 481: 1974, Coupling devices for power line carrier systems Translation
IDT
SNI 04-1707.1-2002
Listrik perdesaan - Bagian 1: Pedoman pengusahaan
Rural electricity - Part 1: Exertion guide
21
SNI 04-6211-2000
Persyaratan dan pengujian fiting saluran udara
Requirements and testing of overhead line fittings
46
Overhead lines - Testing of foundation for structures
47
Loading tests on overhead line structures
11
Thermal-mechanical performance test and mechanical performance test on string insulator units
29
IEC 61284 : 1997, Overhead lines - Requirements and tests for fittings Translation SNI 04-6277-2000
IDT Saluran udara - Pengujian pondasi untuk struktur
IEC 1773: 1996, Overhead lines - Testing of foundation for structures Translation SNI IEC 60652:2009
IDT Uji pembebanan pada struktur saluran udara
IEC 60652:2009, Loading tests on overhead line structures Translation SNI IEC 60575:2009
IDT Uji Kinerja Termal Mekanis dan Uji Kinerja Mekanis pada Unit Insulator Renteng
IEC 60575:2009, Thermal-mechanical performance test and mechanical performance test on string insulator units Translation SNI IEC 62192:2010
IDT Pekerjaan Bertegangan - Tali insulasi
Live working - Insulating ropes
IEC 62192 ED 1.0 (2009-02) Translation SNI IEC 60700-1:2015
IDT Katup tiristor untuk transmisi daya arus searah tegangan tinggi (ASTT) Bagian 1: Uji listrik (IEC 60700-1:2008, IDT)
Tiristor valves for power transmission of high voltage direct current (HVDC) - Part 1: Electrical tests (IEC 60700-1: 2008, IDT)
49
IEC 60700-1:2008 IDT SNI 8151:2015
Ruang bebas dan jarak bebas minimum pada saluran udara tegangan arus searah (SUTAS)
Free space and minimum clearances in air duct voltage direct current
13
SNI IEC 60909-3:2011
Arus hubung pendek dalam sistem ab fase-tiga - Bagian 3: Arus selama dua hubung pendek saluran-ke-bumi simultan yang terpisah dan arus hubungpendek parsial yang mengalir melalui bumi
Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth
15
IEC 60909-3 (2003-09) Short-circuit currents in three-phase a.c. systems - Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth Translation SNI IEC 61477:2011
IDT Kerja bertegangan - Persyaratan minimum untuk pemanfaatan perkakas, gawai dan perlengkapan
Live working - Minimum requirements for the utilization of tools, devices and equipment
IEC 61477 (2005-01) Live working - Minimum requirements for the utilization of tools, devices and equipment Translation SNI IEC 62004:2011
IDT Kawat paduan aluminium (aluminium alloy) tahan panas untuk konduktor saluran udara
Thermal-resistant aluminium alloy wire for overhead line conductor
IEC 62004 (2007-02) Thermal-resistant aluminium alloy wire for overhead line conductor Translation
IDT
SNI 04-1694-1989
Menara saluran udara, Ujian pada pembebanan
Overhead line tower, Testing for loading
SNI 04-6918-2002
Ruang bebas dan jarak bebas minimum pada Saluran Udara Tegangan Tinggi (SUTT) dan Saluran Udara Tegangan Ekstra Tinggi (SUTET)
Free space and minimum free distance in high transmisiion line and high extra voltage transmission
SNI 04-1690-1989
Tiang listrik dari kayu, Syarat-syarat teknis
Wooden electric poles, Technical specification
29.240.30
Peralatan kendali untuk sistem tenaga listrik
SNI 04-3582-1994
29.240.99
8
Control equipment for electric power systems
Pemutus tenaga arus bolak-balik tegangan tinggi - Bagian 1: Lingkup, kondisi dan definisi
Peralatan lain yang berkaitan dengan jaringan distribusi
SNI 04-3581-1994
4 18
High voltage alternating current circuit breaker. Part 1: Scope, condition and definition
Other equipment related to power distribution network
Konektor tembus untuk kabel pilin udara tegangan rendah
Break through connector for low voltage overhead line winding cables
- 107 -
17
SNI 04-3900-1995
Elektroda bumi jenis batang baja bulat
Steel rod type ground electrodes
14
SNI IEC 60871-4:2009
Kapasitor shunt untuk sistem tenaga listrik a.b dengan tegangan nominal diatas 1000 V - Bagian 4 : Sekering internal
Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 4: Internal fuses
10
IEC 60871-4:2009, Shunt capacitors for AC power systems having a rated voltage above 1000 V - Part 4: Internal fuses Translation SNI IEC/TR 60919-1:2009
IDT Unjuk Kerja Sistem Arus Searah Tegangan Tinggi (ASST) dengan Konverter Saluran-Komutasi - Bagian 1 : Kondisi Ajek (Steady State)
Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions
80
IEC/TR 60919-1:2009, Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions Translation SNI IEC/TS 60871-3:2011
IDT Kapasitor shunt untuk sistem tenaga listrik arus bolak-balik dengan tegangan pengenal di atas 1000 V – Bagian 3: Proteksi kapasitor shunt dan gugus kapasitor shunt
Shunt capacitors for a.c. power system having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks
IEC/TS 60871-3 (1996-03) Shunt capacitors for a.c. power system having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks Translation SNI IEC/TR 62511:2016
IDT Pedoman untuk desain sistem daya terinterkoneksi (IEC/TR 62511:2014, IDT)
Guidelines for the design of the interconnected power systems (IEC/TR 62511:2014, IDT)
34
IEC/TR 62511:2014 IDT
29.260
Electrical equipment for working in special condition
Peralatan listrik untuk bekerja dalam kondisi khusus
29.260.01
Peralatan listrik untuk bekerja dalam kondisi khusus
SNI 04-6957-2003
Electrical equipment for working in special condition
Pemutus sirkit untuk perlengkapan (PMS-P)
Circuit breakers for equipment (CBE)
115
Residual current operated circuit - breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 1: General rules
126
IEC 60934: 2000-10, Circuit breakers for equipment (CBE) Translation SNI 04-6956.1-2003
MOD Pemutus sirkit arus sisa tanpa proteksi arus lebih terpadu untuk pemakaian rumah tangga dan sejenisnya (RCCB) - Bagian 1: Umum
IEC 1008-1: 1996-12, Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1 : General rules Translation
29.260.20
MOD
Peralatan listrik untuk daerah yang mudah meledak
Electricai apparatus for explosive atmospheres
SNI 04-6192.18-1999
Radas listrik untuk atmosfir gas ledak. Bagian 18: Pengkapsulan "m"
Electrical apparatus for explosive gas atmospheres. Part 18: Encapsulation "m"
20
SNI 04-6543.6-2001
Radas listrik untuk atmosfir gas yang dapat meledak - Bagian 6: Rendamanminyak ''0''
Electrical apparatus for explosive gas atmospheres - Part 6: Oil-immersion "0''
11
IEC 60079-6: 1995, Electrical apparatus for explosive gas atmospheres - Part 6: Oil-immersion "0'' Translation SNI IEC 60079-10-2:2010
IDT Atmosfer Ledak - Bagian 10-2: Klasifikasi area - Atmosfer debu yang mudah terbakar
Explosive atmospheres - Part 10-2: Classification of areas - Combustible dust atmospheres
IEC 60079-10-2 ED 1.0 (2009-04) Translation SNI IEC 60079-0:2009
IDT Aparatus listrik untuk atmosfer gas ledak - Bagian 0: Persyaratan umum
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
67
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosures "d"
68
Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures "p"
31
IEC 60079-0:2009, Explosive atmospheres - Part 0: Equipment - General requirements Translation SNI IEC 60079-1:2009
IDT Aparatus listrik untuk atmosfer hulu ledak - Bagian 1: Selungkup kedap api "d"
IEC 60079-1:2009, Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd' Translation SNI IEC 60079-2:2009
IDT Atmosfer gas ledak - Bagian 2: Proteksi perlengkapan dengan selungkup bertekanan "p"
IEC 60079-2:2009, Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures 'p' Translation
IDT
SNI IEC 60079-17:2014
Atmosfer ledak - Bagian 17: Inspeksi dan pemeliharaan instalasi listrik (IEC 60079-17:2007, IDT)
Explosive atmospheres - Part 17: Inspection and maintenance of electrical installations (IEC 60079-17: 2007, IDT)
SNI 04-6920.1-2002
Proteksi terhadap impuls elektromagnetik petir - Bagian 1: Prinsip umum
Protection against lighting electromagnetic impuls - Part 1: General principles
40
IEC 1312-1: 1995, Protection against lightning electromagnetic impuls - Part 1: General principles Translation
29.260.99
MOD
Peralatan listrik lainnya untuk bekerja pada kondisi khusus
Other electrical equipment for working in special condition
SNI 04-6187-1999
Sadel, klem tiang (klem tongkat) dan lengkapannya untuk pekerjaan bertegangan
Saddles, pole clamps (stick clamps) and accessories for live working
39
SNI 04-6528-2001
Gawai tangga dengan batang berisolasi yang digunakan dalam keadaan bertegangan
Aerial devices with insulating boom used for live working
69
IEC 1057: 1991, Aerial devices with insulating boom used for live working Translation
29.280
IDT
Electric traction equipment
Peralatan traksi listrik
SNI 04-3590-1994
Suplai tegangan sistem traksi
Supply voltage of for traction system
SNI 04-3866-1995
Peraturan tentang pantograf kereta rel listrik
Rules for pantographs of electric rolling stocks
SNI 04-6274-2000
Traksi listrik - Sarana gelinding - Uji gabungan inverter-penyulang motor bolak-balik dan sistem kendalinya
Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control
2 9 22
IEC 1377: 1996, Electric traction - Rolling stock - Combined testing of inverter-fed alternating current motors and their control Translation SNI 04-6275.3-2000
IDT Peralatan elektronika yang digunakan pada kendaraan di atas rel - Bagian 3: Berbagai komponen, peralatan elektronika terprogram dan keandalan dari sistem elektronika
Electronic equipment used on rail vehicles - Part 3: Components, programmable electronic equipment and electronic system reliability
IEC 60571-3: 1990, Electronic equipment used on rail vehicles - Part 3: Components, programmable electronic equipment and electronic system reliability Translation
IDT
- 108 -
15
31
ELECTRONICS
ELEKTRONIKA
31.020
Electronic components in general
Komponen elektronik secara umum
SNI 04-2014-1990
Automatic voltage regulator (AVR)
Automatic voltage regulator (AVR)
20
SNI 04-6972-2003
Penyajian dan spesifikasi data keandalan untuk komponen elektronik
Presentation and specification of reliability data for electronic components
20
IEC 60319: 1999-09 Translation
31.040
MOD
Resistors
Resistor
31.040.10
Resistor tetap
SNI IEC 60115-1:2011
Fixed resistors
Resistor tetap untuk penggunaan pada peralatan elektronika - Bagian 1: Spesifikasi umum
Fixed resistors for use in electronic equipment - Part 1: Generic specification
IEC 60115-1 ed. 4.0 2008 Fixed resistors for use in electronic equipment - Part 1: Generic specification Translation SNI 04-6716.1-2002
IDT Resistor tetap yang digunakan pada peralatan elektronik - Bagian 1: Spesifikasi generik
Fixed resistors for use in electronic equipment - Part 1: Generic specification
67
IEC 60115-1, Fixed resistors for use in electronic equipment - Part 1: Generic specification Translation
31.040.99
IDT
Resistor lainnya
SNI IEC 61051-1:2011
Other resistors
Varistor untuk penggunaan pada peralatan elektronika - Bagian 1: Spesifikasi umum
Varistors for use in electronic equipment -Part 1: Generic specification
IEC 61051-1 ed. 2.0 2007 Varistors for use in electronic equipment -Part 1: Generic specification Translation
31.060
IDT
Capacitors
Kapasitor
31.060.01
Kapasitor secara umum
Capacitors in general
SNI 04-1874-1990
Persyaratan umum, kapasitor untuk motor asinkron
General specification for capacitors of asynchronous motor
SNI 04-0531-1989
Kapasitor untuk aparat listrik
Capacitor for electrical apparatus
31.060.10
Kapasitor tetap
SNI 04-6924.4-2002
9 21
Fixed capacitors
Kapasitor tetap untuk penggunaan pada peralatan elektronik - Bagian 4: Spesifikasi seksi kapasitor elektrolit aluminium dengan elektrolit padat dan non padat
Fixed capacitors for use in electronic equipment - Part 4: Sectional specification aluminium electrolytic capacitors with solid and non solid electrolytic
37
IEC 384-4-1985 Fixed capasitors for use in electronic equipment - Part 4 ; Sectional specification : Aluminium electrolytic capasitors withsolid or non solid electrolyte Translation SNI IEC 60384-1:2010
IDT Kapasitor tetap untuk penggunaan dalam peralatan elektronik - Bagian 1: Spesifikasi umum
Fixed capacitors for use in electronic equipment - Part 1: Generic specification
IEC 60384-1 third Edition Translation
31.060.30
IDT
Kapasitor kertas dan plastik
SNI IEC 60252-1:2010
Paper and plastics capacitors
Kapasitor motor arus bolak-balik - Bagian 1: Umum - Kinerja, pengujian dan penilaian - Persyaratan keselamatan - panduan untuk pemasangan dan operasi
AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation
IEC 60252-1 First Edition Translation
31.060.70
IDT
Kapasitor tenaga
SNI 04-6625.3-2001
Power capacitors
Kapasitor shunt untuk sistem tenaga listrik a.b.b. bertegangan pengenal di atas 1000 V - Bagian 3: Proteksi kapasitor shunt dan gugus kapasitor shunt
Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks
27
IEC 871-3: 1996, Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks Translation SNI 04-6534.2-2001
MOD Kapasitor seri untuk sistem tenaga listrik - Bagian 2: Perlengkapan proteksi untuk gugus kapasitor seri
Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
51
IEC 143-2: 1994, Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks Translation SNI 04-6625.4-2001
IDT Kapasitor shunt untuk sistem tenaga listrik a.b.b. bertegangan pengenal di atas 1000 V - Bagian 4: Pengaman lebur internal
Shunt capacitor for a.c. power systems having a rated voltage above 1000 V - Part 4: Internal fuses
11
IEC 60871-4: 1996, Shunt capacitors for a.c. power systems having a rated voltage above 1000 V - Part 4: Internal fuses Translation
31.080
MOD
Semi-conductor devices
Piranti semikonduktor
31.080.01
Piranti semikonduktor secara umum
SNI IEC 61975:2009
Semi-conductor devices in general
Pengujian sistem untuk ASTT
System testing of high-voltage direct current (HVDC) installations
111
IEC 61975:2009, System tests for high-voltage direct current (HVDC) installations Translation SNI IEC 61975:2012
IDT Instalasi Arus Searah Voltase Tinggi (ASVT) – Uji Sistem
High-voltage direct current (HVDC) installation –System test
IEC 61975:2010 IDT
31.080.99
IDT
Piranti semikonduktor lainnya
SNI IEC 62031:2013
Other semi-conductor devices
Modul LED untuk pencahayaan umum - Spesifikasi keselamatan
LED modules for general lighting - Safety specifications
15
IEC 62031:2008 Translation
31.100
IDT
Electronic tubes
Tabung elektronik
SNI 04-6708.16-2002
Pengukuran sifat fisik listrik dari katup dan tabung elektronika - Bagian 16: Metoda pengukuran untuk tabung gambar televisi
Measurement electrical properties of electronic tubes and valves - Part 16: Measurement method for television image tubes
10
Measurement of the electrical properties of electronic tubes - Part 14: Methods of measurement of radar and osciloloscope cattode - Ray tubes
23
IEC 60151.16-1968 Measurements of the electrical properties of electronic tubes and valves Translation SNI 04-6708.14-2002
IDT Pengukuran sifat-sifat elektris dari tabung elektronika - Bagian 14: Metode pengukuran tabung sinar katoda radar dan oskiloskop
IEC 60151-14:1975, Measurements of the electrical properties of electronic tubes and valves. Part 14: Methods of measurement of radar and oscilloscope cathode-ray tubes Translation
IDT
- 109 -
31.180
Printed circuits and boards
Rangkaian dan papan tercetak
SNI 04-6252.12-2001
Papan tercetak - Bagian 12: Spesifikasi panel laminasi masal (papan tercetak berlapis-banyak semi manufaktur)
Printed boards - Part 12: Specification for mass lamination panels (semi-manufactured multiplayer printed boards)
20
IEC 326-12: 1992, Printed boards - Part 12: Specification for mass lamination panels (semi-manufactured multiplayer printed boards) Translation SNI 04-6252.6-2001
IDT Papan tercetak - Bagian 6: Spesifikasi papan tercetak berlapis banyak
Printed boards - Part 6: Specification for single and multilayer printed boards
23
Printed boards - Part 9: Specification for flexible multilayer printed boards through connections
40
IEC 326-6: 1980, Printed boards - Part 6: Specification for single and multilayer printed boards Translation SNI 04-6252.9-2000
IDT Papan tercetak - Bagian 9: Spesifikasi papan tercetak fleksibel berlapis banyak dengan penghubung tembus
IEC 326-9: 1991, Printed boards - Part 9: Specification for flexible multilayer printed boards through connections Translation SNI 04-6252.10-2002
IDT Papan tercetak - Bagian 10: Spesifikasi papan tercetak sisi-ganda kaku lentur dengan hubungan-tembus
Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with though-connections
29
IEC 60326.10:1991, Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with though connections Translation SNI 04-6252.4-2000
IDT Papan tercetak - Bagian 4: Spesifikasi untuk papan tercetak tunggal dan ganda dengan lubang-lubang sederhana
Printed boards - Part 4: Printed boards specification for single and double sided printed boards with plain hole
11
Printed boards - Part 8: Specification for single and double sided flexible printed boards with through connections
24
IEC 326-4 : Printed Boards Specification for Single and Double Sided Printed Boards with Plain Hole Translation SNI 04-6252.8-2001
IDT Papan tercetak - Bagian 8: Spesifikasi papan tercetak lentur sisi tunggal dan ganda dengan penghubung
IEC 326-8: 1981, Printed boards - Part 8: Specification for single and double sided flexible printed boards with through connections Translation SNI 04-6252.5-2001
IDT Papan tercetak - Bagian 5: Spesifikasi papan tercetak sisi tunggal dan sisi ganda dengan lubang terlapis (PTH)
Printed boards - Part 5: Specification for single and double sided printed boards with platedthrough holes
20
IEC 326-5: 1980, Printed boards - Part 5: Specification for single and double sided printed boards with plated-through holes Translation SNI 04-6252.11-2002
IDT Papan tercetak - Bagian 11: Spesifikasi papan tercetak lapis ganda kaku lentur dengan hubungan langsung
Printed boards - Part 11: Printed boards specification for rigid-flexible double-sided printed boards with direct connections
32
Printed boards - Part 7: Specification for single and double sided flexible printed boards without through connections
26
IEC 60326-11:1991, Printed boards with through connections Translation SNI 04-6252.7-2001
IDT Papan tercetak - Bagian 7: Spesifikasi papan tercetak lentur sisi tunggal dan ganda tanpa penghubung
IEC 326-7: 1981, Printed boards - Part 7: Specification for single and double sided flexible printed boards without through connections Translation SNI 04-1633-1989
31.220
Printed circuit board, Basic dimension
Peralatan tusuk kontak dan kotak kontak. Konektor
SNI 04-1982-1990
Plug-and-socket devices. Connectors
Lobang tusuk kontak telepon (L.T.K.T.)
Telephone plug holes
Keselamatan produk laser. Bagian 1: Klasifikasi perlengkapan, persyaratan dan petunjuk pengguna
Safety at laser products. Part 1: Equipment classification, requirements and user's guide
IEC 825-1: 1993, Safety at laser products - Part 1: Equipment classification, requirements and user's guide Translation SNI IEC 60825-1:2011
IDT Keselamatan produk laser - Bagian 1: Klasifikasi dan persyaratan peralatan
IEC 60825-1 ed. 2.0 2007 Safety of laser products - Part 1: Equipment classification and requrements Translation
13
Optoelectronics. Laser equipment
Optoelektronik. Peralatan laser
SNI 04-6294.1-2000
5
Electromechanical components for electronic and te
Komponen elektromekanik untuk peralatan elektronik
31.220.10
31.260
IDT Ukuran dasar papan rangkaian tercetak
IDT
- 110 -
Safety of laser products - Part 1: Equipment classification and requrements
114
33
TELECOMMUNICATIONS
TELEKOMUNIKASI
33.020
Telecommunications in general
Telekomunikasi secara umum
SNI 04-1999-1990
Penyearah untuk catu daya sentral telepon
Rectifier for central telephone power supply
SNI 10-4835-1998
Sistem komunikasi penanggulangan tumpahan minyak di laut
Communication systems for protection of marine oil spills
33.040
4
Telecomunication systems
Sistem telekomunikasi
33.040.01
40
Komunikasi telepon dan telegraf secara umum
Telephone and telegraph communications in general
SNI 04-2000-1990
Kutub tanah tipe pelat untuk pentanahan perangkat telekomunikasi
Plate type ground pole for grounding of telecommunication devices
SNI 04-2016-1990
Frequency division multiplex telegrap (VFT - FDM)
Frequency division multiplex telegrap (VFT - FDM)
27
SNI 04-4111-1996
Sentral telepon langganan (STL)
Subscriber telephone terminals
12
SNI 04-1996-1990
Kutub tanah tipe batang untuk pentanahan perangkat telekomunikasi
Rod type ground pole for grounding of telecommunication devices
SNI 04-2017-1990
Time division multiplex telegrap/Data (VFT - TDM)
Time division multiplex telegraph/data (VFT - TDM)
41
SNI 04-2008-1990
Sistem pentanahan perangkat telekomunikasi, Petunjuk pemasangan
Telecomunication devices grounding system, Guide for installation
25
SNI 04-2007-1990
Kutub tanah tipe mendatar untuk pentanahan perangkat telekomunikasi
Horizontal type ground pole for gorunding of telecomunication device
SNI 04-1995-1990
Sistem pentanahan perangkat telekomunikasi
Grounding system for telecommunication devices
33.040.20
Sistem transmisi
SNI 04-7096-2005
7
6
8 24
Transmission systems
Kualitas transmisi telepon saluran pelanggan dan set-karakteristik transmisi telepon digital untuk pita telepon (300-3400 Hz)
The quality of customer line telephone transmission and transmission characteristics - set for telephone band (300-3400 Hz) digital telephones
30
ITU-T P.310, Transmission characteristic for telephone band (3000 - 3400 Hz) digital telephone Translation
IDT
SNI 04-1985-1990
Ruang sambung berdiri (R.S.B.)
Manhole connecting space
11
SNI 04-1986-1990
Ruang sambung jongkok (R.S.J.)
Handhole connecting space
6
33.040.40
Jaringan komunikasi data
SNI 04-6257-2000
Data communication networks
Nilai tukar data untuk pembacaan meter, terhadap tarif dan kontrol beban Nilai tukar data lokal pembacaan langsung
Data exchange for meter reading, tariff and load control direct local data exchange
36
Data exchange for meter reading, tariff and load control - Local bus data exchange
150
IEC 1107 (1992-07), Data exchange for meter reading, tariff and load control - direct local data exchange IDT SNI 04-6278-2000
Pertukaran data untuk pembacaan meter, tarif dan kontrol beban Pertukaran data dan saluran lokal
IEC 61142: 1993, Data exchange for meter reading, tariff and load control - Local bus data exchange Translation
33.040.50
IDT
Saluran, sambungan dan sirkuit
Lines, connections and circuits
SNI 04-2093-1990
Persyaratan umum terminal blok rangka pembagi utama kabel telepon
General rules for main distribution frame terminal block telephone cables
SNI 04-2066-1990
Saluran penanggal atas tanah dengan penggantung kawat baja untuk kabel telepon
Ground dropper wires with steel wire hanger for telephone cable
SNI 04-2065-1990
Saluran kabel telepon rumah
Indoor telephone line cables
SNI 04-2382-1991
Perangkat pengganda saluran digital
Digital channel multipliers
13
SNI 04-2082-1990
Selongsong sambung kabel telepon tanah
Junction sleeve of ground telephone cables.
20
SNI 04-2067-1990
Saluran penanggal atas tanah dari baja sepuh tembaga untuk kabel telepon
Ground dropper wires of copper gilt steel for telephone cables
SNI 04-2088-1990
Kotak pembagi dalam (KPD) untuk kabel telepon
Indoor terminal blocks for telephone cables
18
SNI 04-2087-1990
Kotak pembagi luar (KPL) untuk kabel telepon
Outdoor terminal blocks for telephone cables
13
SNI 04-2086-1990
Rumah kabel telepon dalam (RKD)
Indoor telephone cable houses
10
SNI 04-2085-1990
Rumah kabel telepon luar (RKL)
Outdoor telephone cable houses
12
SNI 04-2084-1990
Selongsong sambung kabel telepon polong berisi petrojeli
Junction sleeve of petrojelly duct telephone cables
15
SNI 04-2083-1990
Selongsong sambung kabel telepon polong tanpa petrojeli
Junction sleeve of non petrojelly duct telephone cables
14
SNI 04-2089-1990
Selongsong sambung kabel telepon udara
Junction sleeve of overhead telephone cables
12
SNI 04-2090-1990
Konektor urat kabel telepon
Connector for main telephone cables
11
33.040.60
Peralatan telepon
12 8
7
Telephone equipment
SNI 04-2020-1990
Pesawat telepon umum dengan kartu debet (P.T.U.K.D)
General telephone machine with debet card
30
SNI 04-2384-1991
Pesawat telepon umum coin (PTUC)
Coin public telephone apparatus
28
SNI 04-2021-1990
Pesawat telepon otomat
Automatic telephone machine
32
SNI 04-1981-1990
Kotak terminal pelanggan (K.T.P.)
Customer terminal blocks
19
SNI 04-1980-1990
Sambungan pembagi tetap kerut panas
Fixed dividing joints
12
33.040.70
Peralatan untuk teleks teleteks telefaks
Equipment for telex, teletext, telefax
SNI 04-2018-1990
Akomfax
Acomfax
23
SNI 04-2010-1990
Perangkat akomex (adaptor komputer - telex)
Computer-telex adaptor devices
23
SNI 04-3508-1994
Pesawat faksimile grup II dan III
Facsimile machines group II and III
25
SNI 04-2009-1990
Pesawat teleprinter elektronik
Electronic teleprinter devices
26
33.040.99
Peralatan lain untuk komunikasi telelpon dan teleg
Other equipment for telephone and telegraph commun
SNI 03-2377-1991
Tiang telepon beton prategang berpenampang bulat berongga, panjang 7 meter
Hollow space round profile prestressed concrete telephone pole, 7 meter
SNI 04-2075-1990
Tiang telepon besi sembilan meter
Iron telephone poles, 9 meters
7
SNI 04-2074-1990
Tiang telepon besi delapan meter
Iron telephone poles, 8 meters
5
SNI 04-2073-1990
Tiang telepon besi tujuh meter
Iron telephone poles, 7 meters.
7
SNI 04-2072-1990
Tiang telepon besi enam meter
Iron telephone poles, 6 meters
7
- 111 -
17
33.050
Telecomunication terminal equipment
Peralatan terminal telekomunikasi
33.050.10
Perangkat telepon
SNI 04-7042-2004
33.060
Telephone equipment
Pesawat telepon analog
Analogue telephones
Radiocommunications
Komunikasi radio
33.060.20
Peralatan penerima dan pemancar
SNI 04-2232-1991
33.060.30
22
Receiving and transmitting equipment
Pesawat penerima radio, FM Hi - Fi, Persyaratan unjuk kerja minimum
Relai radio dan sistem komunikasi satelit
High fidility FM radio receivers, Minimum performance requirement
8
Radio relay and fixed sateilite communications sys
SNI 04-2380-1991
Perangkat pengganda saluran AM
AM channel multipliers
14
SNI 04-2381-1991
Perangkat pengganda saluran FM
FM channel multipliers
14
33.060.50
Jasa mobil
SNI 04-2011-1990
33.100
Mobile services
Radio VHF/UHF dengan modulasi frekuensi untuk dinas bergerak di darat
29
Electromagnetic compatibility (EMC)
Kompatibiltas elektromagnetik (EMC)
SNI 04-3868-2001
VHF/UHF radio with frequency modulation for land mobile services
Uji interferensi radio pada insulator tegangan tinggi
Radio interference test for high voltage insulators
8
IEC 60437: 1997, Radio interference tests on high voltage insulators Translation
IDT
SNI CISPR 16-1-1:2011
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 1-1: Aparatus pengukur kekebalan dan gangguan radio Aparatus pengukur
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
SNI CISPR 16-1-5:2011
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 1-5: Aparatus pengukur kekebalan dan gangguan radio Tempat uji kalibrasi antenna untuk frekuensi 30 MHz sampai dengan 1 000 MHz
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz
55
IEC CISPR 16-1-5 ed1.0:2003 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration test sites for 30 MHz to 1000 MHz Translation
IDT
SNI CISPR 16-2-1:2011
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 2-1: Metode pengukuran gangguan dan kekebalan Pengukuran gangguan konduksi
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
SNI CISPR 16-1-4:2011
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 1-4: Aparatus pengukur kekebalan dan gangguan radio Antena dan tempat uji untuk pengukuran gangguan radiasi
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
SNI CISPR 16-1-2:2011
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 1-2: Aparatus pengukur kekebalan dan gangguan radio Perangkat tambahan - Gangguan konduksi
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Ancillary equipment Conducted disturbances
SNI CISPR 14-1:2014
Kompatibilitas elektromagnetik - Persyaratan untuk perkakas rumah tangga, pperalatan elektris dan aparatus sejenis - Bagian 1: Emisi (CISPR 14-1 ed 5.2 Consol. With am 1&2:2011, IDT)
Electromagnetic compatibility - Requirements for household utensils, electrical pperalatan and similar apparatus - Part 1: Emission
86
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
25
CISPR 14-1 ed 5.2 Consol. With am 1&2:2011 IDT
IDT
SNI CISPR 14-2:2011
Kompatibilitas elektromagnetik - Persyaratan untuk perlengkapan rumah tangga, peralatan kelistrikan dan aparatus yang sejenis - Bagian 2: Kekebalan - Standar produk rumah tangga dan sejenisnya
IEC CIPPR 14-2 ED1.2:2008 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard Translation SNI CISPR 20:2014
IDT Penerima siaran televisi dan radio serta perangkat terkait - Karakteristik kekebalan - Limit dan metode pengukuran (CISPR 20 ed 6.0:2006, IDT)
Radio and television broadcast receivers and associated equipment - immunity characteristics - Limits and methods of measurement
94
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power
52
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar devices
53
CISPR 20 ed 6.0:2006 IDT
IDT
SNI CISPR 16-2-2:2014
Spesifikasi untuk metode dan aparatus pengukur gangguan radio dan kekebalan - Bagian 2-2: Metode pengukuran gangguan dan kekebalan Pengukuran daya gangguan (CISPR 16-2-2 ed 2.0:2010, IDT)
CISPR 16-2-2 ed 2.0:2010 IDT
IDT
SNI CISPR 15:2014
Limit dan metode pengukuran karakteristik gangguan radio untuk pencahayaan elektris dan perangkat sejenis (CISPR 15 ed 7.2 Consol. With am 1&2:2009, IDT)
CISPR 15 ed 7.2 Consol. With am 1&2:2009 IDT
IDT
SNI CISPR 16-1-3:2011
33.100.01
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 1-3: Aparatus pengukur kekebalan dan gangguan radio Perangkat tambahan - Daya gangguan
Kompatibilitas elektromagnetik secara umum
SNI 04-6204.2.2-2000
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment Disturbance power
Electromagnetic compatibility in general
Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 2: Tingkat kesesuaian pada frekuensi-rendah akibat gangguan dan pensinyalan pada sistem suplai daya tegangan-rendah
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
8
IEC 1000-2-2 :1990-05, Electromagnetic compatibility (EMC) - Part 2 : Environment - Section 2: Compatibility levels for low frequency conducted disturbances and signalling in public low-voltage power supply systems Translation SNI 04-6204.2.6-2001
IDT Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 6: Penilaian tingkat emisi pada suplai daya industri berkenaan dengan gangguan frekuensi rendah
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assesment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
60
IEC 1000-2-6: 1995, Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assesment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances Translation SNI 04-6204.2.5-2001
MOD Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 5: Klasifikasi lingkungan elektromagnetik - Publikasi KEM dasar
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classsification of electromagnetic environment - Basic EMC publication
54
IEC 61000-2-5: 1995, Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classsification of electromagnetic environment - Basic EMC publication Translation SNI 04-6260.2-2000
IDT Kesesuaian elektromagnetik pada perlengkapan pengukuran dan kontrol proses industri - Bagian 2: Persyaratan luahan elektrostatik
Electromagnetic compatibility for industrial process measurement and control equipment Part 2: Electrostatic discharge requirements
IEC 801-2: 1991, Electromagnetic compatibility for industrial process measurement and control equipment - Part 2: Electrostatic discharge requirements Translation
IDT
- 112 -
29
SNI 04-6204.2.3-2000
Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 3: Penjelasan lingkungan - Fenomena teradiasi dan terkonduksi tanpa terkait dengan frekuensi jaringan
Electromagnetic compability (EMC) - Part 2: Environment - Section 3: Description of environment - Radiated and non network frequency related conducted phenomena
66
IEC 1000-2-3 edisi pertama 1992-09, Electro¬magnetic Compability (EMC), Part 2: Environment, Section 3: Description of environment - Radiated and non-network-frequency-related conducted phenomena Translation SNI 04-6204.2.1-2000
IDT Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 1: Uraian lingkungan - Lingkungan elektromagnetik pada frekuensi rendah yang diakibatkan oleh gangguan dan pensinyalan dalam sistem suplai
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the enviroment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public powe
22
IEC 1000-2-1:1990-05,Electromagnetic compatibility(EMC)-Part 2: Environment-Section 1:Description of the environment ekctromagnetic environment for low frequency conducted disturbances and signalling in public power supply systems Translation SNI 04-6204.1.1-2000
IDT Kesesuaian elekromagnetik (KEM) - Bagian 1: Umum - Seksi 1: Penerapan dan interpretasi dari definisi dan istilah dasar
Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms
30
IEC 1000-1-1 : 1992-04, Electromagnetic compatibility (EMC) - Part 1 : General -Section 1: Application and interpretation of fundamental definitions and terms Translation SNI 04-6291-2000
IDT Batasan dan metode pengukuran karakteristik gangguan radio dari kerja motor listrik dan pemanfaat termal untuk pengunaan rumah tangga dan yang sejenis, perkakas listrik dan aparatus listrik
Limits and methods of measurements of radio disturbance chracteristics of electrical motoroperated and thermal appliances for household and similar porposes, electric tools and electric apparatus
64
IEC CISPR 14: 1988, Limits and methods of measurements of radio disturbance characteristics of electrical motor-operated and thermal appliances for household and similar purposes, electric tools and electric apparatus Translation SNI 04-6204.2.4-2000
IDT Kesesuaian elektromagnetik (KEM) - Bagian 2: Lingkungan - Seksi 4: Tingkat kesesuaian pada pabrik industri untuk gangguan yang terkonduksi frekuensi rendah
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 4: Compatibility panels in industrial plants for low requency conducted disturbances
14
IEC 1000-2-4 edisi pertama 1995-02, Electro¬magnetic Compability (EMC), Part 2: Environment, Section 4: Compability panels in industrial plants for low frequency conducted disturbances IDT
33.100.10 SNI CISPR 11:2012
Perangkat industri, sains dan medis - Karakteristik gangguan frekuensi radio - Limit dan metode pengukuran
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics Limits and methods of measurement
CISPR 11 ed5.1 Consol. with am1 IDT
IDT
SNI CISPR 22:2012
Perangkat teknologi informasi - Karakteristik gangguan radio - Limit dan metode pengukuran
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
CISPR 22 ed6.0 (2008-09) IDT
IDT
SNI CISPR 16-4-4:2016
Spesifikasi untuk metode dan aparatus pengukur gangguan radio dan kekebalan - Bagian 4-4: Pemodelan ketidakpastian, statistik dan limit Statistik keluhan dan model kalkulasi limit untuk perlindungan layanan radio (CISPR 16-4-4:2007, IDT)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services (CISPR 16-4-4:2007, IDT)
68
Methods of measurement of the suppression characteristics of passive EMC filtering devices (CISPR 17:2011, IDT)
66
Vehicles, boats and internal combustion engines - Radio disturbance characteristics Limits and methods of measurement for the protection of on-board receivers (CISPR 25:2008, IDT)
83
CISPR 16-4-4:2007 IDT SNI CISPR 17:2016
Metode pengukuran karakteristik penekanan divais filter EMC pasif (CISPR 17:2011, IDT)
CISPR 17:2011 IDT SNI CISPR 25:2016
Kendaraan, perahu dan mesin pembakaran dalam - Karakteristik gangguan radio - Limit dan metode pengukuran untuk perlindungan perangkat penerima on-board (CISPR 25:2008, IDT)
CISPR 25:2008 IDT
33.120
Components and accessories for telecommunication e
Komponen dan lengkapan untuk peralatan telekomunik
SNI CISPR 24:2012
Perangkat Teknologi Informasi (PTI) - Karakteristik kekebalan - Limit dan metode pengukuran
Software Information Technology (PTI) - immunity characteristics - Limits and methods of measurement
IEC CISPR 24 ed2.0:2010, IDT IDT SNI CISPR 13:2012
Perangkat penerima siaran televisi dan radio dan perangkat terkait Karakteristik gangguan radio - Limit dan metode pengukuran
The device of television and radio broadcast receivers and related devices - Radio disturbance characteristics - Limits and methods of measurement
IEC CISPR 13 ed5:2009, IDT IDT SNI CISPR 16-2-4:2012
Spesifikasi untuk metode dan aparatus pengukur kekebalan dan gangguan radio - Bagian 2-4: Metode pengukuran kekeblan dan gangguan Pengukuran kekebalan
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4 Methods of measurement and interference kekeblan - Measurement immunity
IEC CISPR 16-2-4 ed1.0:2003, IDT IDT
33.120.10
Kabel koaksialKendali
SNI 04-3634-1994
33.120.20
Coaxial cables. Waveguides
Kabel penanggal bawah Tanah
Underground dropper telephone cable
Kawat dan kabel simetris
11
Wires and symmetrical cables
SNI 04-2069-1990
Kabel telepon tanah berperisai, berisolasi dan berselubung polietilen berisi petrojeli
Polyethylene sheathed, petro jelly filled, shielded ground telephone cables
22
SNI 04-2070-1990
Kabel tanah tanpa perisai berisolasi dan berselubung polietilen berisi petrojeli
Polyethylene insulated and sheathed, petrojelly filled, unshielding ground telephone cables
22
SNI 04-2013-1990
Kabel telepon tanah berperisai berisolasi polietilen busa berkulit dan berselubung polietilen berisi kompon jeli. (T - Ebk J (Pem) E)
Foam polyethylene insulated, polyethylene sheathed, jelly compound filled, shealded telephone cables
23
SNI 04-2071-1990
Kabel telepon tanah tanpa perisai berisolasi dan berselubung polietilen
Polyethylene insulated and sheathed, unshielded ground telephone cables
19
SNI 04-2004-1990
Prosedur uji kabel telepon
Telephone cable, Test procedure
44
SNI 04-2064-1990
Kabel telepon udara berisolasi dan berselubung polietilen, berpenguatan sendiri
Polyethyelene insulated and sheathed, self supporting overhead telephone cables
SNI 04-2003-1990
Kabel telepon tanah tanpa perisai berisolasi polietilen busa berkulit dan berselubung polietilen berisi petrojeli (Tp - Ebk J (Pe) E)
Foam skin polyethylene insulated and polyethylene sheathed petrojelly filled ground telephone cable (Tp - Ebk J (Pe) E)
18
SNI 04-2012-1990
Kabel telepon tanah tanpa perisai berisolasi polietilen busa berkulit dan berselubung polietilen
Foam skin polyethyline insulated and polyethyline sheated unshielded ground telephone cable
19
- 113 -
8
SNI 04-2019-1990
Kabel sentral telepon berisolasi PE dan berselubung PVC dengan lindung pisah elektris. S-E(Pcl)V 2(1x2x0,6)
PE Insulated and PVC sheathed with electrical separator office telephone cable
18
SNI 04-2077-1990
Kabel rumah berpelindung elektris berisolasi dan berselubung PVC
PVC insulated and sheathed, electrically shielded, indoor cables
14
SNI 04-2081-1990
Kabel telepon rumah berpenghantar tembaga lapis timah putih,berpelindung elektris, berisolasi, dan berselubung PVC
PVC insulated and sheathed electrically shielded, tin coated copper conductor, indoor telephone cables
14
SNI 04-2092-1990
Kabel telepon penanggal bawah tanah berperisai berisi petrojeli
Unshielded petro jelly filled underground dropper telephone cables
14
SNI 04-3633-1994
Kabel tanah tanpa perisai, berisolasi dan berselubung polietilen berisi petrojely dengan lindung pisah elektrik
Polyethylene insulated and sheated, petrojelly filled, which electrical separatur unshielding ground telephones cables
17
SNI 04-2076-1990
Kabel telepon rumah, berisolasi dan berselubung PVC
PVC insulated and sheathed indoor telephone cables
14
SNI 04-2068-1990
Kawat sambung untuk kabel telepon
Connecting wire for telephone cables
SNI 04-2080-1990
Kabel telepon rumah berpenghantar tembaga lapis timah putih, berisolasi dan berselubung PVC
PVC insulated and sheathed, tin coated copper conductor indoor telephone cables
SNI 04-1991-1990
Utas mikro telepon
Micro telephone cord
SNI 04-1992-1990
Kabel sentral telepon berisolasi PE dan berselubung PVC dengan lindung pisah elektris
PE insulated and PVC sheathed electrically shielded office telephone cables
SNI 04-1990-1990
Kabel pesawat telepon
Telephone devices cables
SNI 04-2079-1990
Kawat sambung lapis timah putih
Tin coated connecting wire
SNI 04-2078-1990
Kabel sungai berperisai pipa baja berulir, berisolasi, dan berselubung polietilen berisi petrojeli
Polyethylene insulated, and sheathed, petro jelly filled with threaded steel pipe shielding river cables
SNI 04-2091-1990
Kabel telepon rumah tiga urat
Three wire indoor telephone cables
33.120.40
Antena
SNI 04-6251.1-2000
5 14 6 15 5 5 16 4
Aerials Antena untuk penerimaan bunyi dan penyiaran televisi pada rentang 30 MHz sampai 1 GHz - Bagian a : Karakteristik elektris dan mekanis
Aerials for the sound reception and television broadcasting in the frequency range 30 MHz to 1 GHz - Part a : Electrical and mechanical characteristic
7
Telescopic receiver antena
8
IEC 597 Part 1 : Aerials for the recepsion of Electrical and mechanical characteristic Translation SNI 04-0920-1989
33.120.99
IDT Antena penerima berbentuk teleskop
Komponen dan lengkapan lainnya
Other components and accessories
SNI 04-1993-1990
Sangkutan kabel penanggal atas tanah
Ground dropper cable hook
SNI 04-1989-1990
Pipa polong dan kelengkapannya (dari bahan PVC keras)
Duct pipe and its accessories (Hard PVC materials)
SNI 04-1984-1990
Sengkang kabel penanggal atas tanah
Ground dropper cable pole strap
9
SNI 04-1983-1990
Sengkang kabel udara
Overhead cable pole strap
9
SNI 04-1988-1990
Sumbat pipa kabel
Cable pipe plugs
33.160
21
13
Audio, video and audiovisual engineering
Rekayasa audio video dan audiovisual
33.160.01
8
Sistem audio video dan audiovisual secara umum
Audio, video and audiovisual systems in general
SNI 04-2234-1991
Sistem dan peralatan audio Hi Fi, Persyaratan umum
High fidelity audio equipment and systems, General requirement
SNI 04-6253-2003
Peralatan audio, video dan elektronika sejenis - Persyaratan keselamatan
Audio, video and similar electronic apparatus - Safety requirements
3 148
IEC 60065: 2001-12, Audio, video and similar electronic apparatus - Safety requirement Translation SNI IEC 61883-1:2009
MOD Perlengkapan video/audio konsumen-antarmuka digital - Bagian 1 : Umum
Consumer audio/video equipment - Digital interface - Part 1: General
20
35
IEC 61883-1 Edition 3.0 (2008-02) Consumer audio/video equipment - Digital interface - Part 1: General Translation
IDT
SNI 04-6714.5-2002
Peralatan tata suara - Bagian 5: Pengeras suara
Sound system equipmnent - Part 5: Loudspeakers
SNI 04-6709.1-2002
Peralatan dan sistem audio visual, video dan televisi - Bagian 1: Umum
Audio visual, video and television equipment and system - Part 1: General
9
IEC 574.1-1977, Audio visual, video and television equipment and system Part 1 : General Translation SNI 04-6714.1-2002
IDT Peralatan tata suara - Bagian 1: Umum
Sound system equipment - Part 1: General
19
IEC 60268 -1 Sound System Equipment, Part 9 : General Translation
33.160.10
SNI 04-2233-1991
33.160.20
IDT
Pengeras suara
Amplifiers
Penguat audio Hi Fi, Persyaratan unjuk kerja minimum
High fidelity audio amplifiers, Minimum performance requirement
Pesawat penerima radio dan televisi
9
Radio and television receivers
SNI 04-2654-1992
Persyaratan keselamatan untuk pemakaian pesawat penerima televisi
Safety requirement for the operation of television receivers
11
SNI IEC 60107-2:2015
Metode pengukuran pada pesawat penerima untuk transmisi siaran televisi Bagian 2: Kanal audio - Metode umum dan metode untuk kanal monofonik (IEC 60107-2:1997, IDT)
Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - common methods and methods for monophonic channels (IEC 60107-2: 1997, IDT)
32
IEC 60107-2:1997 IDT
33.160.30
Sistem perekam suara
SNI 04-6709.10-2004
Sound recording systems
Peralatan dan sistem audiovisual, video dan televisi - Bagian 10: Sistem kaset audio
Audiovisual, video and television equipment and systems - Part 10: Audiocassette
14
Mechanical safety of cathode ray tubes
37
IEC 60574: 1983 Translation SNI IEC 61965:2009
IDT Keselamatan mekanis tabung sinar katoda
IEC 61965 Edition 2.0 (2003-07) Mechanical safety of cathode ray tubes Translation
33.160.40
IDT
Sistem perekam video
SNI 04-6293-2000
Vldeo recording systems
Sistem cakram-video berpantulan optik pra-terekam "tampilan laser" 50 Hz/ bergaris 625-PAL
IEC 856: 1986, Pre-recorded optical reflective videodisk system "laser vision" 50 Hz/625 lines-PAL Translation
IDT
- 114 -
Pre-recorded optical reflective videodisk system "laser vision" 50 Hz/625 lines-PAL
33
33.160.50
Lengkapan
Accessories
SNI 04-2649-1992
Metode pengujian - Pengeras suara jenis kerucut
Test method for cone type loudspeakers,
23
SNI 04-2650-1992
Pengeras suara jenis corong
Funnel type loudspeakers
14
SNI 04-2648-1992
Pengeras suara jenis kerucut (cone)
Cone type loudspeakers
13
SNI 04-2647-1992
Pengeras suara jenis kerucut, Peraturan umum
Cone type loudspeakers, General requirements
6
SNI IEC 60268-4:2009
Peralatan sistem suara - Bagian 4 : Mikropon
Sound system equipment - Part 4: Microphones
41
High fidelity audio equipment and systems; Minimum performance requirements - Part 7: Loudspeakers
12
Sound system equipment - Part 5: Loudspeakers
55
IEC 60268-4 Edition 3.0 (2004-02) Sound system equipment - Part 4: Microphones Translation SNI IEC 60581-7:2013
IDT Perangkat dan sistem audio kejernihan tinggi: Persyaratan Kinerja Minimum - Bagian 7: Pengeras suara
IEC 60581-7: 1986 Translation SNI IEC 60268-5:2013
IDT Perangkat sistem suara - Bagian 5: Pengeras suara
IEC 60268-5:2003+A1:2007 Translation SNI IEC 61305-5:2013
IDT Perangkat dan sistem audio kejernihan tinggi untuk rumah tangga - Metode pengukuran dan penentuan kinerja - Bagian 5: Pengeras suara
Household high-fidelity audio equipment and system - Methods of measuring and specifying the performance - Part 5: Loudspeaker
7
IEC 61305-5: 2003 Translation
33.180
IDT
Fibre optic communications
Komunikasi serat optik
33.180.10
Serat dan kabel
Fibres and cables
SNI 7615.2:2010
Kabel serat optik - Bagian 2: Single mode berkonstruksi loose tube untuk aplikasi duct
Optical fiber cables - Part 2: Single mode loose tube constructed for duct applications
SNI 7615.3:2010
Kabel serat optik - Bagian 3: Single mode berkonstruksi loose tube untuk aplikasi kabel udara
Optical fiber cables - Part 3: Single mode loose tube constructed for the application of aerial cable
SNI 7615.1:2010
Kabel serat optik - Bagian 1: Single mode berkonstruksi loose tube untuk aplikasi tanam langsung
Optical fiber cables - Part 1: Single mode loose tube constructed for the application of direct planting
SNI 7616:2010
Persyaratan teknis terminal Code Division Multiple Access (CDMA) 2000 1X
Technical Requirements terminal Code Division Multiple Access (CDMA) 2000 1X
33.180.20
Alat interkoneksi serat optik
SNI 04-7113.1-2005
Fibre optic interconnecting devices
Konektor untuk kabel dan serat optik - Bagian 1: Spesifikasi umum
Connector for optical fibre and cables. Part 1: General specification
27
IEC 60874.1: 1999, Connector for optical fiber and cables - Part 1 : Generic spesification Translation
33.200
IDT
Telecontrol. Telemetering
Kendali jarak jauh Pengukuran jarak jauh
SNI 04-7021.2.1-2004
Peralatan dan sistem telekontrol - Bagian 2: Kondisi operasi - Seksi 1: Catu daya dan kompatibilitas elektromagnetik
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
23
Telecontrol equipment and systems - Part 1: General considerations - Section 2: Guide for specifications
18
Telecontrol equipment and systems - Part 1: General considerations - Section 1: General principles
28
Telecontrol equipment and systems - Part 3: Interfaces (electric characteristics)
25
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements
24
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structures of application data
22
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures
47
Telecontrol equipment and systems - Part 5: Transmission protocols - Section 1: Transmission frame format
35
IEC 60870-2-1: 1995 Translation SNI 04-7021.1.2-2004
MOD Peralatan dan sistem telekontrol - Bagian 1: Pertimbangan umum - Seksi 2: Pedoman untuk spesifikasi
IEC 60870-1-2: 1989 Translation SNI 04-7021.1.1-2004
MOD Peralatan dan sistem telekontrol - Bagian 1: Pertimbangan umum - Seksi 1: Prinsip umum
IEC 60870-1-1: 1988 Translation SNI 04-7021.3-2004
MOD Peralatan dan sistem telekontrol - Bagian 3: Antar muka (karakteristik listrik)
IEC 60870 Translation SNI 04-7021.5.4-2004
MOD Peralatan dan sistem telekontrol - Bagian 5: Protokol transmisi - Seksi 4: Definisi dan pengkodean aplikasi elemen informasi
IEC 60870-5-4: 1993 Translation SNI 04-7021.5.3-2004
MOD Peralatan dan sistem telekontrol - Bagian 5: Protokol transmisi - Seksi 3: Struktur umum data aplikasi
IEC 60870-5: 1990 Translation SNI 04-7021.5.2-2004
MOD Peralatan dan sistem telekontrol - Bagian 5: Protokol transmisi - Seksi 2: Prosedur transmisi link
IEC 60870-5: 1990 Translation SNI 04-7021.5.1-2004
MOD Peralatan dan sistem telekontrol - Bagian 5: Protokol transmisi - Seksi 1: Format frame transmisi
IEC 60870-5: 1990 Translation
MOD
- 115 -
35 35.020
INFORMATION TECHNOLOGY. OFFICE EQUIPMENT
TEKNOLOGI INFORMASI. PERALATAN KANTOR
lnformation technology (IT) in general
Teknologi informasi (IT) secara umum
SNI 19-7125-2005
Teknologi Informasi - Teknik keamanan - Panduan teknik untuk penggunaan dan manajemen jasa Pihak Ketiga Terpercaya
Information technology - Security techniques - Technical guidelines for the use and management of Trusted Third Party services
40
ISO/IEC TR 14516: 2002, Information technology - security techniques - Guidelines for use management of Trusted third party services Coversheet SNI 7512:2008
IDT Teknologi informasi - Teknik keamanan - Pengelolaan insiden keamanan informasi
Information technology - Security techniques - Information security incident management (ISO/IEC TR 18044:2004, MOD)
59
ISO/IEC TR 18044:2004, Information technology - Security techniques - Information security incident management Translation SNI IEC 61000-4-4:2013
MOD Kompatibilitas elektromagnetik (EMC) - Bagian 4-4: Teknik pengukuran dan pengujian-Uji kekebalan listrik transien cepat (burst)
Electromagnetic compatibility (EMC) - Part 4-4: testing and measurement techniques - Test electrical fast transient immunity (burst)
16
Identification cards - Test methods - Part 6: proximity card
16
Information technology - Security techniques - Guidelines for auditors for information security controls
51
Information technology - Security techniques - Guidelines on the integrated implementation of ISO / IEC 27001 and ISO / IEC 20000-1
16
Information technology - Security techniques - Guidelines for information security management systems auditing
36
Information technology - Security techniques - Information security management Measurement
68
IEC 61000-4-4:2011 IDT
IDT
SNI ISO/IEC 10373-6:2013 Kartu identifikasi – Metode uji – Bagian 6: Kartu proksimitas ISO/IEC 10373-6:2011 IDT SNI ISO/IEC TR 27008:2013
IDT Teknologi informasi - Teknik keamanan - Pedoman untuk auditor tentang kendali keamanan informasi
ISO/IEC/TR 27008:2011 Translation SNI ISO/IEC 27013:2013
IDT Teknologi informasi - Teknik keamanan - Pedoman penerapan terintegrasi SNI ISO/IEC 27001 dan SNI ISO/IEC 20000-1
ISO/IEC 27013:2012 IDT SNI ISO/IEC 27007:2013
IDT Teknologi informasi - Teknik keamanan - Pedoman keamanan informasi manajemen sistem audit
ISO/IEC 27007:2011 Translation SNI ISO/IEC 27004:2013
IDT Teknologi informasi - Teknik keamanan - Manajemen keamanan informasi Pengukuran
ISO/IEC 27004:2009 Translation SNI ISO/IEC 27002:2013
IDT Teknologi informasi - Teknik keamanan - Kode praktek untuk manajemen keamanan informasi Panduan praktik manajemen keamanan informasi
Information technology - Security techniques - Code of practice for information security management
109
ISO/IEC 27002:2005 Translation SNI ISO/IEC TR 200005:2013
IDT Teknologi informasi - Manajemen layanan - Bagian 5: Contoh acuan perencanaan implementasi SNI ISO/IEC 20000-1
Information technology -- Service management -- Part 5: Exemplar implementation plan for ISO/IEC 20000-1
37
ISO/IEC TR 20000-5:2010 Translation
IDT
SNI ISO/IEC TR 200004:2013
Teknologi informasi - Manajemen layanan - Bagian 4: Model referensi proses
Information technology -- Service management - Part 4: Process reference
27
SNI ISO/IEC 27014:2013
Teknologi informasi - Teknik keamanan - Tata kelola keamanan informasi
Information technology - Security techniques - Information security governance
16
Information technology--Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1
36
ISO/IEC 27014:2013 IDT SNI ISO/IEC TR 200003:2013
IDT Teknologi informasi - Manajemen layanan - Bagian 3: Pedoman pendefinisian lingkup dan kesesuaian dari SNI ISO/IEC 20000-1
SNI ISO/IEC 20000-2:2013 Teknologi informasi - Manajemen layanan - Bagian 2: Pedoman penerapan sistem manajemen layanan
Information technology - Service management - Part 2: Guidance on the application of service management systems
104
Information technology - Service management - Part 1: Service management system requirements
38
Information technology -- Security techniques -- Information security management for intersector and inter-organizational communications
66
Penilaian kesesuaian-Fundamental sertifikasi produk dan panduan skema sertifikasi produk Conformity assessment-Fundamentals of product certification and guidelines for product certification schemes
Conformity assessment - Fundamentals of product certification and product certification scheme guide Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes
16
IDT Teknologi Informasi - Teknik keamanan - Informasi manajemen risiko keamanan
Information technology - Security techniques - Information security risk management
81
Electromagnetic compatibility (EMC) - Part 4-5: testing and measurement techniques - Test shock immunity
16
Electromagnetic compatibility (EMC) - Part 4-5: testing and measurement techniques - Test shock immunity
16
ISO/IEC 20000-2:2012 Translation
IDT
SNI ISO/IEC 20000-1:2013 Teknologi informasi - Manajemen layanan - Bagian 1: Persyaratan sistem manajemen layanan ISO/IEC 20000-1:2011 Translation SNI ISO/IEC 27010:2013
IDT Teknologi informasi - Teknik keamanan - Manajemen keamanan informasi untuk komunikasi antar-sektor dan antar-organisasi
ISO/IEC 27010:2012 Translation SNI ISO/IEC 17067:2013
IDT
ISO/IEC 17067:2013 IDT SNI ISO/IEC 27005:2013 ISO/IEC 27005:2011 Translation SNI IEC 61000-4-5:2013
IDT Kompatibilitas elektromagnetik (EMC) - Bagian 4-5: Teknik pengukuran dan pengujian-Uji kekebalan kejut
IEC 61000-4-5:2005 IDT SNI IEC 61000-4-8:2013
IDT Kompatibilitas elektromagnetik (EMC) - Bagian 4-8: Teknik pengukuran dan pengujian-Uji kekebalan medan magnetic frekuensi daya
IEC 61000-4-8:2009 IDT
IDT
- 116 -
SNI IEC 61000-4-11:2013
Kompatibilitas elektromagnetik (EMC) - Bagian 4-11: Teknik pengukuran dan pengujian-Uji kekebalan tegangan turun sesaat (voltage dips), interupsi singkat (short interruptions) dan variasi tegangan (voltage variations)
Electromagnetic compatibility (EMC) - Part 4-11: measurement techniques and testing Test immune instantaneous voltage drop (voltage dips), short interruptions (short interruptions) and voltage variation (voltage variations)
16
Electromagnetic compatibility (EMC) - Part 4-13: measurement techniques and testing low frequency immunity tests on harmonics and inter-harmonics including signaling the grid ac power port
16
IEC 61000-4-11:2004 IDT SNI IEC 61000-4-13:2013
IDT Kompatibilitas elektromagnetik (EMC) - Bagian 4-13: Teknik pengukuran dan pengujian-Uji kekebalan frekuensi rendah pada harmonic dan inter-harmonik termasuk signalling jala-jala listrik port daya a.c.
IEC 61000-4-13:2009 IDT
IDT
SNI 0055:2013/ Amd1:2013
Tekstil-Handuk, Amandemen 1
Textiles - Towels, Amendment 1
16
SNI 7931:2013
Perancangan kapasitas dan layout sistem pembangkit listrik tenaga mikrohidro jenis cross-flow sampai dengan daya terbangkit 25 kW
Capacity planning and system layout of micro hydro power plant type cross-flow up to 25 kW of power rise
16
SNI IEC 61000-4-6:2014
Kompatibilitas elektromagnetik (EMC) - Bagian 4-6: Teknik pengujian dan pengukuran - Kekebalan terhadap gangguan konduksi yang diinduksi oleh medan frekuensi radio (IEC 61000-4-6 ed 3.0:2008, IDT)
Electromagnetic compatibility (EMC) - Part 4-6: testing and measurement techniques Immunity to conduction disturbances induced by radio frequency fields
60
Electromagnetic compatibility (EMC) - Part 4-3: testing and measurement techniques - Test immunity radio frequency electromagnetic fields emitted
78
Electromagnetic compatibility (EMC) - Part 4-2: testing and measurement techniques electrostatic discharge immunity test
70
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation voltage changes, voltage fluctuations and flicker in low-voltage supply systems for the public, for the device with the current class of