![Handbook Multiflo Australia Spec Pumps PDF [PDF]](https://pdfs.asia/img/200x200/handbook-multiflo-australia-spec-pumps-pdf.jpg)
8 0 3 MB
MULTIFLO A USTR AL IA
Product Catalogue
Pty Ltd
M U LTI F LO P U M PS PS By MULTIFLO
AUSTRALIA
Pty. Ltd.
MULTIFLO offers a high quality range of products. These include the MULTIFLO range of vacuum primed diesel and electric driven pump sets that can be custom-built to ensure the very best performance for your operation, and survive under the toughest of operating conditions.
MULTIFLO Pump Units were first produced in 1976, designed and manufactured to provide a better and more reliable alternative to efficiently pump clean the open cut coal mining pits at the time. To secure a market place, formation of a pump hire division was put in place using products ex works, this enabled the company to be actively involved with development and requirements of setting in place mine pit dewatering systems in the open cut mining area.
Having achieved this mark, MULTIFLO entered into the open cut mining industry with a range of diesel and electric driven “vactronicTM” vacuum primed pump sets capable of pumping not only water against high head situations, but also large quantities of slurry from the open pits.
Further information on the company and products may be obtained by contacting the Caloundra office, thus enabling our office to connect you with the MULTIFLO representative best able to work with you on your project.
MULTIFLO HEAD OFFICE Multiflo Australia Pty Ltd 4 Daniel Street, Caloundra QLD 4551 P O Box 3580, Caloundra D.C. QLD 4551 AUSTRALIA Ph: 07 5491 2877 Fax: 07 5491 2805 Email: [email protected] Website: www.multiflo.com.au
Page 1 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS By MULTIFLO
AUSTRALIA
Pty. Ltd.
Model: M/FV-360S-SS Owner: PT Petrosea
Model: MFV-W390S Owner: Kelian
Model: MFV-360BP Owner: Pama
Model: MFC-385 Owner: Coates—on site
Model: MFC-420B Owner: Banpu
Model: MFV-W390BP-CH Owner: KPC
Model: MFC-385 Owner: Coates Shorco Sykes
Model: MFV-W390BP Owner: Blair Athol
Page 2 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS By MULTIFLO
AUSTRALIA
Pty. Ltd.
MODEL MFCMFC-120
GENERAL INFORMATION
CONSTRUCTION
100 x 100 single stage centrifugal
Pump Casing - Cast Iron
Type – 120MS
Impeller - Stainless Steel
Frame Size - 2A
Shaft - 431 Stainless Steel
Seal - Mechanical
** For aggressive water applications, all wetted
Passage Size - 50 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3024
-
23 kW
Maximum Flowrate
- 60 litres per second
Deutz F3L1011F
-
23 kW
Shutoff Head
- 36 metres
Hatz 2L41C
-
18.8 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
1135 mm
Length
-
2250 mm
Width
-
1000 mm
Weight – Dry
-
1140 kg
Weight – Wet
-
1300 kg
Fuel Capacity
-
160 litres
Page 3 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS AUSTRALIA
Pty. Ltd.
MULTIFLO 120 PERFORMANCE CURVE
By MULTIFLO
Page 4 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS By MULTIFLO
AUSTRALIA
Pty. Ltd.
MODEL MFCMFC-140
GENERAL INFORMATION
CONSTRUCTION
150 x 150 single stage centrifugal
Pump Casing - Cast Iron
Type – 140MS
Impeller - Stainless Steel
Frame Size - 4A
Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal
** For aggressive water applications, all wetted
Passage Size - 50 mm
parts are available in stainless steel
ENGINE OPTIONS Caterpillar 3054
PERFORMANCE
-
49 kW
Maximum Flowrate
-
80 litres per second
Cummins B3,3-65 -
36 kW
Shutoff Head
-
50 metres
Deutz F3L912
-
30 kW (Max 1800RPM)
Hatz 3L41C
-
30 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
1470 mm
Length
-
2800 mm
Width
-
1132 mm
Weight – Dry
-
1650 kg
Weight – Wet
-
2230 kg
Fuel Capacity
-
580 litres
Page 5 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS AUSTRALIA
Pty. Ltd.
MULTIFLO 140 PERFORMANCE CURVE
By MULTIFLO
Page 6 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS By MULTIFLO
AUSTRALIA
Pty. Ltd.
MODEL MFCMFC-160
GENERAL INFORMATION
CONSTRUCTION
150 x 150 single stage centrifugal
Pump Casing - Cast Iron
Type – 160
Impeller - Stainless Steel
Frame Size - 4A
Shaft - 431 Stainless Steel
Seal - Gland Packing or Mechanical Seal
** For aggressive water applications, all wetted
Passage Size - 50 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3054NA -
51 kW
Maximum Flowrate
-
90 litres per second
Cummins B3,3T
-
49 kW
Shutoff Head
-
55 metres
Deutz F4L912
-
41 kW (Max 1800RPM)
Hatz 4L41C
-
42 kW (Max 1800RPM)
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
1470 mm
Length
-
2800 mm
Width
-
1132 mm
Weight – Dry
-
1650 kg
Weight – Wet
-
2230 kg
Fuel Capacity
-
580 litres
Page 7 – Multiflo Pump Products Catalogue
M U LTI F LO P U M PS PS AUSTRALIA
Pty. Ltd.
MULTIFLO 160 PERFORMANCE CURVE
By MULTIFLO
Page 8 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-180
GENERAL INFORMATION
CONSTRUCTION
200 x 200 single stage centrifugal
Pump Casing - Cast Iron
180G
Impeller - Stainless Steel
Frame Size - 5AA
Shaft - 431 Stainless Steel
Gland – Conventional packed, oil lubricated
** For aggressive water applications, all wetted
Using a controlled drip feed system
parts are available in stainless steel
Passage Size - 25 mm
ENGINE OPTIONS Caterpillar 3056T
PERFORMANCE
-
110 kW
Maximum Flowrate
-
140 litres per second
Cummins 6BTA5.9 -
101 kW
Shutoff Head
-
55 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
1675 mm
Length
-
3450 mm
Width
-
1495 mm
Weight – Dry
-
2900 kg
Weight – Wet
-
4000 kg
Fuel Capacity
-
1100 litres
Page 9– Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 180 PERFORMANCE CURVE
By By MULTIFLO
Page 10 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-290
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - Cast Iron
Type – 290MS
Impeller - Stainless Steel
Frame Size - 5AA
Shaft - 431 Stainless Steel
Seal - Gland or Mechanical [Silicon Carbide/Tungsten]
** For aggressive water applications, all wetted
Passage Size - 45 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3056TA -
110 kW
Maximum Flowrate
- 103 litres per second
Cummins 6BTA5.9 -
101 kW
Shutoff Head
- 85 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
1675 mm
Length
-
3450 mm
Width
-
1495 mm
Weight – Dry
-
2900 kg
Weight – Wet
-
4000 kg
Page 11 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 290 PERFORMANCE CURVE
By By MULTIFLO
Page 12 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-345
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - Ultrachrome 28% Cr (A49)
Type – 345G
Impeller - Ultrachrome 28% Cr (A49)
Frame Size - FF
Shaft - CS 1045 Carbon Steel
Gland – Conventional packed, oil lubricated
Sleeve – Fully Hardened Type 420C
Using a controlled drip feed system.
** For aggressive water applications, all wetted
Passage Size – 140 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3406TA -
328 kW
Maximum Flowrate
Cummins N14-450 -
317 kW (Max 1800 RPM) Shutoff Head
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
3100 mm
Length
-
5800 mm
Width
-
2000 mm
Weight – Dry
-
9680 kg
Weight – Wet
-
12000 kg
Fuel Capacity
-
2320 litres
Page 13 – Multiflo Pump Products Catalogue
-
260 litres per second
-
106 metres
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 345 PERFORMANCE CURVE
By By MULTIFLO
Page 14 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-360
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - T220 Grey Cast Iron
Type – 360G
Impeller - 316 Stainless Steel
Frame Size - 6A
Shaft - 1040 Shaft Steel
Gland Seal – Conventional packed, oil lubricated
Shaft Sleeve – 431 Stainless Steel
using a controlled drip feed system.
** For aggressive water applications, all wetted
Passage Size – 45 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3126TA -
166 kW
Maximum Flowrate
- 100 litres per second
Cummins 6CTA8.3 -
157 kW
Shutoff Head
- 126 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
2460 mm
Length
-
5650 mm
Width
-
1800 mm
Weight – Dry
-
6500 kg
Weight – Wet
-
7800 kg
Fuel Capacity
-
1800 litres
Page 15 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 360 PERFORMANCE CURVE
By By MULTIFLO
Page 16 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-380
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - T220 Cast Iron
Type – 380G
Impeller - 316 Stainless Steel
Frame Size - 6A
Shaft - CS1040 Carbon Steel
Gland Seal – Conventional packed, oil lubricated
Sleeve – 431 Stainless Steel
Using a controlled drip feed system.
** For aggressive water applications, all wetted
Passage Size - 45 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar C9 @ 1700 RPM ‘B’ Rating - 219 kW
Maximum Flowrate
- 155 litres per second
Cummins M11-350 @ 1700 RPM
Shutoff Head
- 110 metres
Water Management Rating
- 229 kW
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
2750 mm
Length
-
5650 mm
Width
-
1800 mm
Weight – Dry
-
6500 kg
Weight – Wet
-
7800 kg
Fuel Capacity
-
1800 litres
Page 17 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 380 PERFORMANCE CURVE
By By MULTIFLO
Page 18 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-385
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - T220 Cast Iron
Type – 385G
Impeller - 316 Stainless Steel
Frame Size - 6A
Shaft - CS1040 Carbon Steel
Gland Seal – Conventional packed, oil lubricated
Sleeve – 316 Stainless Steel
Using a controlled drip feed system.
** For aggressive water applications, all wetted
Passage Size - 45 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3406TA -
328 kW
Maximum Flowrate
- 160 litres per second
Cummins N14-450 -
317 kW
Shutoff Head
- 130 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
3030 mm
Length
-
5750 mm
Width
-
2100 mm
Weight – Dry
-
5100 kg
Weight – Wet
-
6500 kg
Fuel Capacity
-
1800 litres
Page 19 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 385 PERFORMANCE CURVE
By By MULTIFLO
Page 20 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-390
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - Ultrachrome 28% Cr (A49)
Type – 8/6 FF-HX Slurry Pump
Impeller - Ultrachrome 28% Cr (A49)
Frame Size - FF
Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated
Sleeve – Fully Hardened Type 420C
using a controlled drip feed method.
** For aggressive water applications, all wetted
Passage Size – 65 mm
parts are available in stainless steel
ENGINE OPTIONS
PERFORMANCE
Caterpillar 3406TA -
328 kW
Maximum Flowrate
- 190 litres per second
Cummins N14-450 -
317 kW
Shutoff Head
- 120 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
2998 mm
Length
-
6096 mm
Width
-
2032 mm
Weight – Dry
-
9800 kg
Weight – Wet
-
13900 kg
Fuel Capacity
-
4000 litres
Page 21 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 390 PERFORMANCE CURVE
By By MULTIFLO
Page 22 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
MODEL MFCMFC-420
GENERAL INFORMATION
CONSTRUCTION
200 x 150 single stage centrifugal
Pump Casing - Ultrachrome 28% Cr (A49)
Type – 8/6 FF-HX Slurry Pump
Impeller - Ni-Cr-Mo Steel (A25)
Frame Size - FF
Shaft - CS 1045 Carbon Steel
Gland Seal - Conventional packed, oil lubricated
Sleeve – Fully Hardened Type 420C
using a controlled drip feed system.
** For aggressive water applications, all wetted
Passage Size - 50 mm
parts are available in stainless steel
ENGINE
PERFORMANCE
Caterpillar 3412 DITTA
Maximum Flowrate
- 273 litres/second
Shutoff Head
- 150 metres
DIMENSIONS/CAPACITIES/WEIGHTS Height
-
3378 mm
Length
-
7500 mm
Width
-
2400 mm
Weight – Dry
-
12260 kg
Weight – Wet
-
16260 kg
Fuel Capacity
-
4012 litres Page 23 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS AUSTRALIA
Pty.Ltd. Ltd. Pty.
MULTIFLO 420 PERFORMANCE CURVE
By By MULTIFLO
Page 24 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Trailer Chassis
The trailer chassis is designed to be bolted on to any of the Multiflo pump units. The trailer chassis is designed to be towed with the correct size vehicle to suit the weight and size of the pump unit. The trailer chassis enables the pump unit to be moved from one pumping location to another with ease. The trailer chassis is fitted with the following items:•
Dual heavy duty axle
•
The correct wheels to suit the size and weight of the pump unit
•
Brakes can be electrical or mechanical (optional)
Page 27 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Heavy Duty Skid Chassis The heavy duty skid chassis is designed to be bolted on to any of the Multiflo pump units. The skid chassis is designed to be pushed around with bull dozers or excavators. The skid runners enable pump units to be mounted on the heavy duty chassis and be towed from one pumping location to another on minesite. The heavy duty skid chassis is fitted with the following items:•
Runners fabricated from rectangular hollow section (RHS)
•
Four lifting points
•
Two tow lugs
•
Supa alloy tow chains
•
Replaceable wear plate
•
Heavy duty pushbar
Page 28 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Skid Mounted Pontoon
The heavy duty skid mounted pontoon unit is designed to float any of the Multiflo pump units. The pontoon is designed to be pushed with bull dozers or excavators. The skid runners enable pump units mounted on the heavy duty pontoon to be towed from one pumping location to another on minesite. The heavy duty skid mounted pontoon is fitted with following items:•
Skid runners fabricated from rectangular hollow section (RHS)
•
Four lifting points
•
Two tow lugs
•
Supa alloy tow chains
•
Replaceable wear plate
•
Heavy duty pushbar
Page 29 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Suction Boom Kit The Suction Boom is designed to control the pump unit suction hose while pumping and when moving from one pumping location to another on mine site. The boom is completely hot dip galvanised and is fitted with Supa Alloy support chains coupled to the chassis. The winch is fixed to a holding point on the chassis and supplied with 16 metres of 6mm wire rope.
Page 30 – Multiflo Pump Products Catalogue
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Model: MFV-W420-BP Owner: PT Kelian
Model: MFC-385S Owner: PT Newmont
Model: MFV-160C Owner: PT Arutmin—Senakin
Model: MFV-140S Owner: PT Indo Muro
Model: ME-W420P Owner: Gold Ridge Mine
Model: MFC-290 Owner: CAT Rental Store
Model: MFV340B Owner: PT Pamapersada
Model: MCL-140 Owner: Coates Shorco Sykes
Page 31 – Multiflo Pump Products Catalogue
Revised 04/05
MU LTIFL F LO M PS PS U LTI O P UPMU PS By By MULTIFLO
AUSTRALIA
Pty.Ltd. Ltd. Pty.
Multiflo Head OFFICE MULTIFLO AUSTRALIA PTY LTD Address:
4 Daniel Street Caloundra 4551 Queensland AUSTRALIA
Postal Address:
P O Box 3580 Caloundra Delivery Centre Caloundra 4551 Queensland AUSTRALIA
Telephone:
617 5491 2877
Fax:
617 5491 2805
Email:
[email protected]
Website:
www.multiflo.com.au
Contacts:
Mr Bryan Fulwood
General Manager
Mr Peter Smit
Project Engineer
Mr Geoff Way
Product Sales – Support
Mr Lincoln Shaw
Product Support
Mr John Emms
Technical Advisor (Nth Qld)
Mr Darin Lusk
Accounts Administrator
Revised 04/05 Page 32 — Multiflo Pump Products Catalogues
Disclaimer: Multiflo Australia Pty Ltd will not be liable for any claims or damages arising out of or in respect to the supply and or manufacture of this product including, but not limited to, claims for faulty design, negligent or misleading advice, damages arising from loss or use of its products, and any direct, special or consequential damages or injury to any person, corporation or other entity.
