JAWABAN Soal MTCNA [PDF]

Citation preview

12/25/21, 9:32 PM



MikroTik Routers and Wireless







Search...



Go



home about buy jobs hardware software support training account



00:04:21 last save: 2021-12-17 10:44:23 Save progress



Logout [email protected] Translate to Bahasa indonesia : OFF 1. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33. Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33.



The maximum bandwidth that the client 10.10.0.33 is be able to obtain is: A. 6M upload/download B. 4M upload/download C. 0M upload/download D. 2M upload/download



2. What is the meaning of the status letter "R" on a PPPoE client interface in RouterOS Interfaces menu? A. Remote B. Running C. Reconnecting D. Radius



3. /interface wireless access-list is used for A. Contains the security profiles settings B. Handles a list of Client's MAC Address to permit/deny connection to AP C. Authenticate Hotspot users D. Shows a list of Client's MAC Address that are already registered at AP



4. A DHCP server is configured on a LAN interface which is a port on a bridge. The DHCP server does not start. What could be the reason(s)?



A. There might not be an IP address assigned to the LAN Interface B. There may be multiple IP addresses set on the LAN interface C. The IP address pool could be incorrectly defined D. The DHCP server can not run on an interface which is also a bridge port



5. It is required to set up a web server residing on a private subnet in a LAN to be accessible from the public Internet. The web server is directly connected to a router which is facing the public Internet. file:///C:/Users/DELL/Downloads/Soal 17 des.html



1/5



12/25/21, 9:32 PM



MikroTik Routers and Wireless



Only the web server port should be accessible from the public. Which of the following configuration steps must be met (select all that apply): A. In IP firewall NAT there should be a dst-nat rule between the public IP address of the web server and the private IP of the web server B. Connection tracking must be enabled on the router C. A route between the router and the web server must exist D. The public IP address of the web server must be installed on the router E. The private IP address of the web server should be routable on the Internet



6. To connect a MikroTik router to a wireless access point, you have to:



00:04:21 last save: 2021-12-17 10:44:23 Save progress



A. Use the same SSID as on the access point B. Use the same band (5 GHz, 2.4 GHz, ...) as on the access point C. Use the same radio name as on the access point



7. What is the correct action to be specified in the NAT rule to hide a private network when communicating to the outside world? A. passthrough B. allow C. tarpit D. masquerade



8. What is possible with Netinstall? A. MikroTik RouterOS reinstall B. MikroTik RouterOS password reset with saving router's configuration C. MikroTik RouterOS configuration reset



9. When frequency mode is set to 'regulatory domain' in wireless interface configuration: A. It ignores transmit power restrictions, but obeys frequency limitations for the value of country selected B. Allows any transmit power to be set with any frequency C. It restricts operation to only the permitted channels and transmit powers according to the value of country selected D. It ignores all restrictions



10. When using routing option 'check-gateway=ping' what is the ICMP echo request interval (in seconds)? A. 30s B. 10s C. 60s D. 20s



11. The highest queue priority is A. 16 B. 8



file:///C:/Users/DELL/Downloads/Soal 17 des.html



2/5



12/25/21, 9:32 PM



MikroTik Routers and Wireless



C. 1 D. 256



12. Mark correct answer for action=dstnat in chain=dst-nat. A. NAT source address B. Change source address and port



00:04:21



C. Change destination address and port D. Add destination address to address-list



13. Choose the correct PCQ argument values to allow 256kbps maximum each client:



last save: 2021-12-17 10:44:23 Saveand progress download upload for



A. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address B. kind=pcq pcq-rate=256000 pcq-classifier=src-address C. kind=pcq pcq-rate=5000000 pcq-classifier=src-address D. kind=pcq pcq-rate=256000 pcq-classifier=dst-address E. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address



14. In which order are the entries in Access List and Connect List processed? A. By interface name B. By Signal Strength Range C. In a random order D. In sequence order



15. A wireless interface 'wlan1' is added to a bridge interface 'br-lan'. To enable dhcp-server for wireless interface 'wlan1', on which interface should dhcp-server be configured?



A. On 'br-lan' B. On 'wlan1' C. The dhcp-server cannot be enabled neither on 'wlan1', nor on 'br-lan' D. On both 'br-lan' and 'wlan1'



16. Select statements that are true regarding the following command:



/ip route add dst-address=172.16.4.0/24 gateway=192.168.4.2 A. The command is used to configure the default route B. The subnet mask for the destination network is 255.255.255.0 C. The command is used to establish a static route D. The default administrative distance of 100 is used



17. Which route will be used to reach host 192.168.1.55?



/ip route



add disabled=no distance=1 dst-address=192.168.1.0/24 gateway=1.1.1.1



add disabled=no distance=1 dst-address=192.168.1.0/25 gateway=2.2.2.2



add disabled=no distance=1 dst-address=192.168.0.0/16 gateway=3.3.3.3 A. Route via gateway 1.1.1.1 file:///C:/Users/DELL/Downloads/Soal 17 des.html



3/5



12/25/21, 9:32 PM



MikroTik Routers and Wireless



B. Route via gateway 3.3.3.3 C. Route via gateway 2.2.2.2



18. A RouterBOARD clock is configured in '/system clock'. The clock resets to default after each reboot.



Select the best solution for the problem.



00:04:21



A. Write a script in '/system script' to set the clock B. Configure '/system ntp server' and set a valid and reachable NTP client address



last save: 2021-12-17 10:44:23 Save progress



C. Open the router and ensure the CMOS battery is fine D. Configure '/system ntp client' and set a valid and reachable NTP server address



19. Mark all correct statements about command 'export file={name of the script file}' : A. Only part of the configuration (for example /ip firewall) can be exported B. Full configuration of the router (without RouterOS user passwords) can be exported C. Log entries from /log print can be exported D. Export files can not be edited



20. Which port does PPTP use by default? A. UDP 1721 B. UDP 1723 C. TCP 1723 D. TCP 1721



21. Consider the following network diagram. In R1, you have the following configuration:



/ip route add dst-address=192.168.1.0/24 gateway=192.168.99.2



/ip firewall nat



add chain=srcnat out-interface=Ether1 action=masquerade



On R2, if you wish to prevent all access to a server located at 192.168.1.10 from LAN1 devices, which of the following rules would be needed? A. /ip firewall nat add chain=dstnat src-address=192.168.99.1 dst-address=192.168.1.10 action=drop B. /ip firewall filter add chain=input src-address=192.168.99.1 dst-address=192.168.1.10 action=drop C. /ip firewall filter add chain=forward src-address=192.168.99.1 dst-address=192.168.1.10 action=drop D. /ip firewall filter add chain=forward src-address=192.168.0.0/24 dst-address=192.168.1.10 action=drop



22. Sending a broadcast ARP message (FF:FF:FF:FF:FF:FF) is used to: A. Send a request to a destination in the same network to clarify a MAC address of a host B. It is not possible to send such message C. Address conflict detection in IPv4 D. For a device to promote itself in broadcast network



23. How long is level 1 (free) license valid? file:///C:/Users/DELL/Downloads/Soal 17 des.html



4/5



12/25/21, 9:32 PM



MikroTik Routers and Wireless



A. 1 year B. 24 hours C. 1 month D. Infinite time



24. What is necessary for PPPoE client configuration? A. Wireless interface configured as an access point B. Static IP address on PPPoE client interface C. ip firewall nat masquerade rule



00:04:21 last save: 2021-12-17 10:44:23 Save progress



D. Interface (on which PPPoE client is going to work)



25. What kind of users are listed in the "/user" menu? A. wireless users B. hotspot users C. router users D. pptp users



Finish



[Back To Main Menu] ©Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Newsletters : Twitter



file:///C:/Users/DELL/Downloads/Soal 17 des.html



5/5