Soal Mtcna [PDF]

Citation preview

12/26/21, 5:51 PM



MikroTik Routers and Wireless Search...



home



about



buy



jobs



hardware



software



support



training







account



Logout [email protected]



00:05:32 last save: 2021-12-26 12:51:06



Translate to Bahasa indonesia : OFF



Save progress



1. What will happen if "Default forward" is disabled in wireless menu on a RouterOS AP? A. Only clients with matching access control list rule will be able to connect to the AP B. AP will not be able to communicate with the clients C. Clients will not be able to communicate with each other D. Clients will not be able to connect to the AP 2. Select how many different priority values are available for queues in MikroTik RouterOS: A. 0 B. 8 C. 16 D. 1 3. Which firewall chain should you use to filter ICMP packets from the router itself? A. output B. input C. forward D. postrouting 4. Which port does PPTP use by default? A. UDP 1721 B. TCP 1721 C. TCP 1723 D. UDP 1723 5. /ip route configuration on router,



/ip /ip /ip /ip



route route route route



add add add add



gateway=192.168.0.1



dst-address=192.168.1.0/24 gateway=192.168.0.2



dst-address=192.168.2.0/24 gateway=192.168.0.3



dst-address=192.168.3.0/26 gateway=192.168.0.4



Router needs to send packets to 192.168.3.240. Which gateway will be used? A. 192.168.0.1 B. 192.168.0.3 C. 192.168.0.4 D. 192.168.0.2 6. A wireless interface 'wlan1' is added to a bridge interface 'br-lan'. To enable dhcp-server for wireless interface 'wlan1', on which interface should dhcp-server be configured?



A. The dhcp-server cannot be enabled neither on 'wlan1', nor on 'br-lan' B. On both 'br-lan' and 'wlan1' C. On 'wlan1' D. On 'br-lan' 7. Select statements that are true regarding the following command:



/ip route add dst-address=172.16.4.0/24 gateway=192.168.4.2 A. The command is used to configure the default route B. The command is used to establish a static route C. The default administrative distance of 100 is used D. The subnet mask for the destination network is 255.255.255.0



https://mikrotik.com/client/training&training_id=50849&training=certification&participant=599248&start_test=1&code=29fb8da7d5



1/4



12/26/21, 5:51 PM



MikroTik Routers and Wireless



8. Select the rule that is used to block SMTP protocol for clients connected to the LAN interface: A. /ip firewall filter add chain=output protocol=tcp dst-port=25 action=drop in-interface=LAN B. /ip firewall filter add chain=forward dst-port=25 action=drop in-interface=LAN C. /ip firewall filter add chain=forward protocol=tcp dst-port=25 action=drop in-interface=LAN D. /ip firewall filter add chain=input protocol=tcp dst-port=25 action=drop in-interface=LAN 9. Which of the following Routes statuses are possible? A. A = Active



00:05:32 last save: 2021-12-26 12:51:06



Save progress



B. S = Static C. D = Drop D. C = Connected 10. Which option in the configuration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect?



A. Security Profile B. Default Forward C. Default Authenticate D. Enable Access List 11. What is the meaning of the status letter "R" on a PPPoE client interface in RouterOS Interfaces menu? A. Running B. Reconnecting C. Remote D. Radius 12. Router has wireless and ethernet client interfaces, all client interfaces are bridged. To create a DHCP service for all clients, DHCP server must be configured on: A. DHCP service is not possible in this setup B. Only on the bridge interface C. Ethernet and wireless interfaces D. Every bridge port 13. What kind of users are listed in the "/user" menu? A. hotspot users B. pptp users C. router users D. wireless users 14. Which options can be used when you want to prevent access from one specific address to your router web interface? A. Firewall Filter Chain Input B. Firewall Filter Chain Forward C. WWW service from IP Services D. Group settings for System users 15. For static routing functionality, additionally to the RouterOS 'system' package, you will also need the following software package: A. no extra package required B. routing C. advanced-tools D. dhcp 16. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33. Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33.



The maximum bandwidth that the client 10.10.0.33 is be able to obtain is: A. 4M upload/download B. 2M upload/download C. 0M upload/download D. 6M upload/download



https://mikrotik.com/client/training&training_id=50849&training=certification&participant=599248&start_test=1&code=29fb8da7d5



2/4



12/26/21, 5:51 PM



MikroTik Routers and Wireless



17. Mark all the features that can be used for limiting client registrations to your access point: A. wpa B. connect-list C. registration-table D. access-list



00:05:32



18. What is possible with Netinstall? A. MikroTik RouterOS reinstall



last save: 2021-12-26 12:51:06



Save progress



B. MikroTik RouterOS configuration reset C. MikroTik RouterOS password reset with saving router's configuration 19. MikroTik RouterOS commands can be run once a day by: A. /system scheduler B. /system watchdog C. /system log D. /system cron 20. When sending out an ARP request, an IP host is expecting what kind of address for an answer? A. VLAN ID B. 802.11g C. IP address D. MAC Address 21. In RouterOS queue configurations the word "total" usually represents A. download - upload B. upload C. download D. upload + download 22. To set up masquerading of the network 192.168.0.0/24, configured on the interface ether1, you should add rule A. /ip firewall nat add chain=srcnat src-address=192.168.1.0/24 action=masquerade B. /ip firewall nat add chain=dstnat in-interface=ether1 src-address=192.168.0.0/24 action=masquerade C. /ip firewall nat add chain=srcnat src-address=192.168.0.0/24 action=masquerade D. /ip firewall nat add chain=dstnat out-interface=ether1 src-address=192.168.0.0/24 action=masquerade 23. Which of the protocols below is used by Netinstall? A. dhcp B. bootp C. arp D. rarp 24. Domain Name System (DNS) can use protocol/port: A. UDP 53 B. UDP 80 C. TCP 80 D. TCP 53 25. When setting up a server, PPP Secrets are used for: A. L2TP clients B. IPsec clients C. Router users D. PPPoE clients E. PPP clients F. PPTP clients Finish



https://mikrotik.com/client/training&training_id=50849&training=certification&participant=599248&start_test=1&code=29fb8da7d5



3/4



12/26/21, 5:51 PM



MikroTik Routers and Wireless



[Back To Main Menu] ©



Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Newsletters : Twitter



00:05:32 last save: 2021-12-26 12:51:06



Save progress



https://mikrotik.com/client/training&training_id=50849&training=certification&participant=599248&start_test=1&code=29fb8da7d5



4/4