Jsa Assembly The Chimney (Not Finish) [PDF]

  • 0 0 0
  • Suka dengan makalah ini dan mengunduhnya? Anda bisa menerbitkan file PDF Anda sendiri secara online secara gratis dalam beberapa menit saja! Sign Up
File loading please wait...
Citation preview

SHE DEPARTMENT ANALISIS KESELAMATAN PEKERJAAN (AKP) JOB SAFETY ANALYSIS (JSA) Nama Pekerjaan WELDING AT HEIGHT Disusun oleh /Developed. by /Task Title Departemen/Seksi MECHANICAL Persetujuan /Dept/Section DEPARTMENT /Approval Divisi /Unit Usaha SINOMA /Division/BU Perusahaan SINOMA /Company Alat Pelindung Diri (APD) yang harus Dipakai /Required Personal Protective Equipment (PPE)



URUTAN PEKERJAAN SEQUENCE OF TASK 1



2



3



Workers Preparation



Tools Preparation



PPE



BAHAYA YANG BISA TIMBUL POTENTIAL HAZARDS



HSE



Doc No: GC-SHE-F-04 Page: Page 1 of 3 Version: 0.0 Approval Date: Author: Mgr SHE



AKP No. /JSA No. Dibuat Tanggal /Issued on Revisi Tanggal /Revision date No AKP Terkait /Relevant JSA No..



TINDAKAN PENCEGAHAN ATAU PROSEDUR YANG DIREKOMENDASIKAN RECCOMMENDED PREVENTION ACTION OR PROCEDURE



acrophobia、hypertension and so on which could result in dropping from height ; lacking of height working experience, relative education, which also could resulting in height dropping and machinery injury



During worker preparation, taking the physical examination of the workers in the clinic, excluding the acrophobia、hypertension workers.



using improper tools can causing someone get electric shock or fire



Checking the tools , make sure all the tools are in good condition, thus security the workers and equipment shelter from hazards



Wearing no safety belts can causing the worker be fall down.



Provide PPE as per the job assignment after training .making sure each worker know how to using PPE to protect themselves.



UV rays



Training the healthy workers about the working at height and notify them safety risks of welding activities at height



Using the proper crane, insure the hoisting capacity meet the lifting requirement.



The welder & the welder helpers must wear welding goggles



THIS DOCUMENT IS UNCONTROLLED IN HARDCOPY FORMAT



SHE DEPARTMENT ANALISIS KESELAMATAN PEKERJAAN (AKP) JOB SAFETY ANALYSIS (JSA) URUTAN PEKERJAAN SEQUENCE OF TASK



BAHAYA YANG BISA TIMBUL POTENTIAL HAZARDS Electrocution/ Spatter burns



4



Welding



Fire Hazard



Doc No: GC-SHE-F-04 Page: Page 2 of 3 Version: 0.0 Approval Date: Author: Mgr SHE



TINDAKAN PENCEGAHAN ATAU PROSEDUR YANG DIREKOMENDASIKAN RECCOMMENDED PREVENTION ACTION OR PROCEDURE Wear proper PPE for welding, leather jackets, Gloves, welding goggles/welding mask Before starting welding make sure the area is clear of all types of combustible materials Provide a fire blanket on site



Burns.



Make sure fire extinguishers are available on site Wear proper PPE for welding, leather jackets, Gloves, welding goggles/welding mask, Trained Fire Watch.



Electrocution/ Spatter burns



Gas Monitor correctly sited. Certified Equipment and to be sited as near as possible to work site.



Damage cable



Hot tabs end pieces of welding rods.



Sparking



Proper earthling of equipment. Certified Welder. Make sure spark containment is used such as a welding hood/fire blanket. Ensure that rod holder is in good condition. Ensure that forward and return cables are in good working condition.



Damage cable



Use proper cable connector for extension. If cables are crossing the road then ensure proper protection.



5



Finishing



UV rays



The welder & the welder helpers must wear welding goggles



Toxic Waste from welding causing contamination to environment



Collect all of welding waste and put in waste treatment room.



Petunjuk Umum /General Guidelines: 1.



Sebutkan secara berurutan hanya langkah-langkah pokok tugas yang harus dikerjakan. Gunakan kalimat aktif secara jelas dan singkat /Describe in sequence only the main steps of the task to be performed. Use active sentences.



THIS DOCUMENT IS UNCONTROLLED IN HARDCOPY FORMAT



SHE DEPARTMENT ANALISIS KESELAMATAN PEKERJAAN (AKP) JOB SAFETY ANALYSIS (JSA) 2.



Gunakan frasa singkat untuk mendeskripsikan Bahaya-bahaya Potensial, seperti: Terjepit di antara daun pintu dan kerangka mesin, dll. /Use



Doc No: GC-SHE-F-04 Page: Page 3 of 3 Version: 0.0 Approval Date: Author: Mgr SHE



simple phrases to describe identified



potential hazards, such as: Pinched between the door and the machine, etc. 1. 2. 3. 4.



Terpukul oleh ... / Struck by ... Membentur ... / Struct against ... Terkena oleh ... / Contacted by ... Kontak dengan ... (listrik, kimia) ... / Contact with ... (Electrical, chemical) 5. Terkait pada … / Caught on … 3.



6. 7. 8. 9. 10.



Terperangkap dalam … / Caught in … Terjepit di antara … / Caught between Terpeleset … / Slip … Jatuh … / Fall … Terlalu memforsir tenaga / Overexertion



11.



Terpapar oleh … / Exposure to …  Menghirup … / Inhaling …  Kulit tubuh terkena … /Absorbing  Menelan … / Swallowing …



Sebutkan Tindakan atau Prosedur yang Direkomendasikan secara jelas dan singkat, dengan menggunakan kalimat aktif /Describe the recommended action or procedure in brief, using active sentence



THIS DOCUMENT IS UNCONTROLLED IN HARDCOPY FORMAT