5 0 18 MB
V826-C ENGLISH
INDUSTRIAL POWER TRANSMISSION PRODUCTS CONVEYOR BELTS ENGINEERING PLASTIC 2013
To give attentive consideration to both humanity and nature.
Safety Precautions Please read all the warnings! ● Please take all necessary precautions when using our products. Also, Please review relevant product catalog and design documents, etc. Significances of safety precautions are categorized as follows: M e a n i n g s
Signs
Danger Warning Caution
Imminently causing death or severe injury to the user who misuses products. Possibly causing death or severe injury to the user who misuses products. Possibly causing personal injury or property damage if misused.
Power Transmission Products Use
Danger
● If you expect that a belt will fail and idle, free-run, or stop the system, thus causing a fatal or severe accident, please provide an extra safety device. ● Do not use a belt as a lifting or towing tool.
Warning
● If you expect that static electricity will come from the power transmission belt system, thus causing fire or malfunction of the controller, use an antistatic belt and set a neutralization apparatus in the system.
Caution
● Do not use a belt as an insulator. Contact us for information on insulation properties, which vary in belt type. ● For a belt that touches food directly, use one that complies with the applicable food hygiene law of your country ● Do not modify a belt, or its quality and performance could deteriorate.
Function & Performance
Caution
● D o not use a belt beyond its capacity or for an application other than that specified by the catalog, design documents, etc. This can cause premature failure of the belt. ● If water, oil, chemical, paint, dust, etc. sticks to a belt or pulley, its power transmission could deteriorate and the belt may fail. ● A cogged belt makes louder noise during high-speed rotation. If this occurs, use a soundproof cover.
Storage & Transportation
Warning
● To store a heavy belt, use a suitable jig or stopper to prevent accidents such as belt toppling or tumbling.
Caution
● Use suitable equipment to carry/handle a heavy belt or pulley. Otherwise, back injury may result. ● D o not put weight on or bend a belt forcibly to carry or store it. Otherwise, it will produce defects or scratches to the belt, resulting in damage. ● Store the belt in low humidity and a temperature range of -10℃ to 40℃. Do not expose belts to direct sunlight.
Mounting & Operation
Danger
Caution
● Install a safety cover over rotating components including belt/ pulley. Otherwise, hair, gloves and clothing can become entangled in the belt/ pulley. If a belt/pulley breaks, fragments may cause injuries. ● T ake the following precautions to maintain, inspect and replace a belt. 1)Turn off power and wait until the belt and pulley have stopped completely. 2)Secure machinery so that it may not move during belt removal. 3)Use caution : Do not unintentionally turn on power. ● Use the same type of belts or pulleys per OEM specification. Use of a different type may cause premature failure. ● Misalignment of the pulleys can damage the belt and result in flange failure. Make proper adjustments to system. ● L oosen the belt tension when changing belts. Do not force or stretch a belt over the flange. Do not use a screw driver or other sharp objects into when replacing the belt as this will result in damage. ● A pply the appropriate belt tension as specified by the relevant catalog and design documents, etc. Inappropriate tension could result in damage of the belt and shaft. ● T ake the following precautions to modify the pulley in use: 1)Remove burrs and maintain proper pulley angle; 2)Secure accurate dimensions after modification; 3)Maintain the pulley strength after modification. ● B efore assembling the flange with the pulley, check for foreign materials between the pulley and flange. Fasten the flange with a caulking tool and so on. Inappropriate installation could result in the flange coming off.
Handling of Used items
Caution 1
● Do not burn belt, or hazardous gas could be produced.
Plastic Conveyor Belts Use
Warning
●Do not use the belt as a lifting or towing device. ●To convey unpackaged food, use a belt that complies with the applicable food hygiene law of your country.
Storage & Transportation
Warning Caution
●To store a large plastic conveyor belt, use a suitable jig or stopper to prevent accidents due to belt toppling or tumbling. ●Use suitable equipment to carry and handle large plastic conveyor belts. Otherwise, back injury may result.
Mounting & Operation
Danger
●Before fitting and inspecting the plastic conveyor belt, be sure to turn off the power of the conveyor and related systems and check to make sure that conveyor has stopped, so as to prevent accidents. ●Fix a safety guard to avoid close contact with conveyor belt in use. Otherwise, you may become entangled in the conveyor system.
Installation Works
Warning
●Solvent and adhesive used for endless type belts is flammable. No open flames are allowed during operation.
Engineering Plastic Products Use
Warning
●Do not use the product for medical purposes, such as transplantation or in such a way that it touches bodily fluids or tissues.
Storage & Transportation
Caution
●Injury may occur as a result of a product falling. Use proper equipment especially when carrying a large product and install it into processing machinery. ●A pile of products on an uneven place could slip, collapse or topple by gravity. Store products on a flat shelf or pallet that won't bend under product weight. ●Static electricity may spark. Do not rub products against insulators like paper, cloth, plastic. ●Gas will occur from burning product. Keep away from fire.
Process
Caution
●Product may break up due to partial heat generated by forced processing. To reduce over heating, use air, cutting oil or a sharp cutting tool, and adjust its feeding speed. Pay special attention to bore processing which generates heat easily. ●As the product is less elastic than metal, it could deform and come off the chuck, scattering materials if it doesn't fit properly on the processing machinery. Fix the product firmly, taking care not to deform materials.
Couplings Use
Danger
●Provide an additional safety device if you expect that a fatal or severe accident may occur if the coupling breaks or comes off, and then idles, free-runs or stops the system.
Function & Performance
Caution
●Do not use product beyond its capacity or for applications other than specified in the catalog, design documents, etc. Otherwise, the product could fail prematurely.
Storage & Transportation
Warning
●Use an appropriate jig or stopper to prevent a large coupling from toppling and tumbling. Do not store coupling at a height where it could fall.
Caution
●Use suitable equipment when carrying or handling a large coupling, depending on its weight. Otherwise, back injury may result.
Mounting & Operation
Danger
●Be sure to put a safety cover over the rotating components including the coupling. Otherwise, hair, gloves or clothing may become entangled. Also, injury may occur if parts fly off. ●Secure coupling. Otherwise, the coupling and its parts may come off. ●Take the following precautions to maintain, inspect or replace coupling: 1) Turn off the power and wait until the machine stops completely. 2) Fix machinery so that it may not move during removal of the coupling. 3) Take care not to unitentionally turn on the switch. ●Before you operate the machine, check to make sure unused bolts or tools do not remain after installation of the coupling. If operation starts with unused items being left behind, they could be flung off, causing injuries.
Caution
●Replace the same type of couplings. Use of a different type of coupling will result in earlier damage. ●Adjust coupling properly Otherwise, deflection or declination will damage or displace the coupling.
Handling of Used items
Danger
●Do not burn the coupling. Otherwise, hazardous gas could be produced.
2
I
N
D
E
X
CONTENTS Safety Precautions�������������������������������������������������� P1,2
1. Power Transmission Belts and Related Products��������������������������� P4 〜 70 2. Conveyor Belts�������������������������������������� P71 〜 80 3. Engineering Plastic Products���������� P82 〜 89
Global Factories & Sales Offices���������������������������� P90
33
1. Power Transmission Belts and Related Products Application Examples ................................................................ P5, 6 Lineup of Belts and Related Products ..................................... P7, 8 Industrial Power Transmission Product Selection Chart ...... P9,10 Dimensions ................................................................................... P11
Ⅰ Synchronous Power Transmission Round Tooth Timing Belt
Belt Type, Dimensions & Product Code................... P13
H Series ...................................................................... P23
Trapezoidal Tooth Timing Belt
SUPER TORQUE Timing Belt G ........................ P14〜16
Belt Type, Dimensions & Product Code .................. P24
SUPER TORQUE Timing Pulley. ............................... P17
green eco® Series....................................................... P25
MEGA TORQUE Timing Belt G&U . ..................... P18,19
Timing Belt G ...................................................... P26〜28
Mega Torque GⅡ. ...................................................... P20
Timing Belt U ...................................................... P29〜31
Mega Torque EX......................................................... P21
LONG-SPAN Timing Belt........................................... P32
Giga Torque GX. ......................................................... P22
Timing Pulley .......................................................... P33, 34
Ⅱ Frictional Forced Power Transmission Classical V-Belt / Red label V-Belt............................ P36
RIBSTAR Belt G (Rubber V-Ribbed Belt). ................. P48
Classical V-Belts for DIN 2215/ISO4184
RIBSTAR Belt U (Polyurethane V-Ribbed Belt). ....... P49
Wrapped Type. ............................................................ P37
RIBSTAR Pulley (V-Ribbed Pulley)............................. P50
Classical V-Belts for DIN 2215/ISO4184
FLEXSTAR® Belt. ......................................................... P51
TRIPLEX® Raw Edge Cogged Type....................P38〜40
SUPER FLEXSTAR® Belt.............................................. P52
MAXSTAR WEDGE V-Belt........................................... P41
FLEXSTAR® Belt J. ...................................................... P53
MAXSTAR WEDGE V-Belt for RMA / MPTA.............. P42
POLYMAX® Belt........................................................... P54
Narrow V-Belt for DIN7753 / ISO4184....................... P43
MB Belt. ....................................................................... P55
SUPER VS® Belt (Variable Speed Belt)...................... P44
STARROPE®, SUPER STARROPE®............................. P56
MAXSTAR WEDGE Bushing Pulley...................... P45, 46
PRENE V-ROPE, PRENE HEXAGONAL-ROPE......... P56
e-Power V-Belt........................................................... P47
Flat Belt........................................................................ P57
®
Ⅲ Direct Connected Power Transmission Chemi-Chan®
(High Performance Miniature Coupling)................... P59 HYPERFLEX® Coupling............................................... P60 TSCHAN® Coupling NOR-MEX®........................... P61, 62 TSCHAN® Coupling S.................................................. P63
Ⅳ Other Related Products SLEEVE ROLL (Polyurethane molded product)....... P65 STARLOCK® (Shaft Fastener)............................... P66, 67
Ⅴ Troubleshooting for Power Transmission Products For Timing Belt............................................................ P69
For V-Belt..................................................................... P70
44
Synchronous Power Transmission & Direct Connected Power Transmission
Large Knitting Machine (SUPER TORQUE Timing Belt)
Polisher (SUPER TORQUE Timing Belt)
Copier (Rubber Timing Belt)
Frictional Forced Power Transmission
Application Example
Heavy Duty Polisher (MAXSTAR WEDGE V-Belt)
Combine (V-Belt for Agricultural Machines)
55
Food Processor (RIBSTAR Belt)
Marine Engine (TSCHAN® Coupling S )
Plastic Card Vender (Polyurethane Timing Belt)
Packaging Machine (Polyurethane Double Timing Belt)
Large Industrial Robot (FREESPANTM Belt)
Dryer (V-Belt)
NC Lathe (RIBSTAR Belt)
NC Lathe (Multi-POLYMAX Belt)
*To show the application examples clearly, safety covers are removed in the pictures on this page. Always put on the safety covers when in use.
66
Lineup of Belts & Related Products Product Name & Application
Product Name & Application
SUPER TORQUE Timing Belt (General use)
Classical V-Belt (General use)
MEGA TORQUE Timing Belt G&U, GⅡ, EX (Heavy-duty use)
New!
Multi V-Belt (General use : Joined V-Belt)
Less Thickness Wrapped V-Belt (Agricultural use) Orange label SUPER AG-X
New!
Timing Belt G (Rubber belt)
BARE-BACK® V-Belt (Agricultural use, Washer and Dryer)
Timing Belt U (Polyurethane belt)
MAXSTAR WEDGE V-Belt (Heavy-duty use)
Rubber Timing Belt H-Series
green eco® Series
New! LONG-SPAN Timing Belt (Endless & Open-End)
Wrapped Belt
Timing Belt
New!
Multi MAXSTAR WEDGE V-Belt, Multi Super WEDGE Ⅱ (Joined V-Belt for Heavy-duty)
e-POWER® Belt (Notched type)
Coupling
Timing Pulley
New!
7
Timing Pulley
Perforated V-ROPE
Chemi-Chan® (High Performance Miniature Coupling)
V-Belt with lugs (Agricultural use)
TSCHAN® Coupling S and Coupling NOR-MEX®
HEXAGONAL V-Belt
New!
Raw Edge COGGED V-Belt (Agricultural use) Orange label SUPER GOLD 1000 AG COG 4 AG COG 20
New!
Product Name & Application
Ribbed Belt
Product Name & Application
RIBSTAR Belt G (Rubber)
RIBSTAR Belt U (Polyurethane)
MB Belt (For Sewing Machine)
Raw Edge COGGED V-Belt (Agricultural use) TRIPLEX e-POWER®
New! Raw Edge MULTI-PLY V-Belt (Automotive use)
Raw Edge COGGED V-Belt (Automotive use)
Polyurethane Belt
Raw Edge Belt
POLYMAX Belt (Wide-angle Polyurethane V-Belt)
Raw Edge COGGED Variable Speed Belt
STARROPE® & SUPER STARROPE® (Polyurethane Round Rope)
PRENE V-ROPE & HEXAGONAL-ROPE (Polyurethane Rope)
FREESPANTM Belt Polyurethane Timing Belt
Pulley and Bushing for WEDGE V-Belt
FLEXSTAR®
Pulley and Bushing for RIBSTAR Belt
SUPER FLEXSTAR® (Heavy-duty use)
Polyurethane Molded
Bushing
MB BUSHING
SLEEVE ROLL
Flat Belt
Pulley
New!
FLEXSTAR® Belt J (For Conveyor)
Flat Belt for general use and lifter
88
■ Industrial Power Transmission Product Selection Chart How much slip can you allow?
How do you want to use it?
What features do you need? Type of Belt / Pulley
Slip Drive Tolerance Classification
Applications
Tooth Shape or Form
Material
Office & Home appliances General use (for motor drive) General use
No slip allowed
Synchronous Power Transmission
Printer
General use
Round tooth
Rubber
Timing Belt
Automotive use (for engine drive) Trapezoidal tooth General use
Office & Home appliances General use
Printer
Round tooth Thermosetting polyurethane
Home appliances
Trapezoidal tooth
General use General use
Round tooth Thermoplastic polyurethane Trapezoidal tooth Less thickness Standard
Office & Home appliances, General use (based on ISO standard)
Agricultural use
Rubber V-Belt General use
Standard
Friction Forced Transmission
Raw Edge
Motorcycle, general use Heavy-duty agricultural use Home appliances, agricultural use, general use
Flat Belt Elevating machine (agricultural use)
3 DS3M・DS5M・DS8M・DS14M
Long-span drive
SUPER TORQUE G Open-End
4 S2M・S3M・S5M・S8M・S14M
Synchronous transportation
SUPER TORQUE G Endless
5 S8M・S14M
Accurate positioning
STARMAX® G
6 ST1.5・ST55・ST80・ST83・ST2.0・ST1.0
Ozone resistance
green eco® Series
7 S2M・S3M・S5M
Low-speed, high-torque use
MEGA TORQUE G
8 MTS5M・MTS8M・MTS14M
High torque use
MEGA TORQUE G2
9 MTS8M, MTS14M
High precision positioning
MEGA TORQUE EX
10 MTS3M, MTS5M
GIGA TORQUE
12 G8M, G14M
Synchronous Power transmission
SYNCHROSTAR® G
13 MXL・XL・L・H・XH・XXH
Heat resistance
SYNCHROSTAR GA
14 ZA・ZAS・ZB・ZBS
Multi-pulley, double-sided drive
SYNCHROSTAR G Double Timing
15 DMXL・DXL・DL・DH
Long-span drive
SYNCHROSTAR G Open-End
16 MXL・XL・L・H
Synchronous transportation
SYNCHROSTAR G Endless
17 L・H・XH・XXH
Ozone resistance
green eco® Series
18 MXL
Clean drive
SUPER TORQUE U
19 S2M・S3M
Long-span drive
SUPER TORQUE U Open-End
20 S2M・S3M
Low-speed, high-torque use
MEGA TORQUE U
21 MTS8M
Accurate positioning
STARMAX® U
22 ST83・ST111
Accurate positioning
STARMAX® U
23 T80・T83・T111
Clean drive
SYNCHROSTAR U
24 T80・T5・T10・AT5・AT10・XL・L
Multi-pulley, double-sided drive
SYNCHROSTAR U Double Timing
25 DT5・DT10
Long-span drive
SYNCHROSTAR U Open-End
26 T80・XL・L
Synchronous transportation
FREESPANTM Belt
28
Light-duty use, compact design
FHP
30 3L・4L・5L
General use
Classical V-Belt
31
High power transmission
Red label V-Belt
32
e-POWER®
33 A・B・C・D
Heavy-duty use, compact design
MAXSTAR WEDGE V
34 3V・5V・8V
Anti-vibration
Multi MAXSTAR WEDGE
35 R3V・R5V・R8V
Shock-load resistance
Multi Super WEDGE II
36 R5V, R8V 37
Long-span drive
Thin Flat ATM, ticket vending Belt machine Office & Home V-Ribbed appliance, general use Belt Automotive use
Round Belt (Square Belt)
Special Belt
Rubber Millable Polyurethane Rubber
Office & Home appliance, general use
Polyurethane
General industries, agricultural machinery
Rubber
General industries
Polyurethane
29
Flex resistance
L type
Heat resistance, flex resistance
Orange label L type
38
Heat resistance, flex resistance
Gold label L type
39
Heat resistance, flex resistance, anti-vibration
AG Series
40
High power transmission
Orange label Raw Edge COGGED
41
Low contraction
SUPER GOLD 1000 Raw Edge COGGED 42
Energy-Saving
e-POWER®
High power transmission
T5・T10・AT5・AT10・L・H
K・M・A・B・C・D・E
LA・LB・LC
LA・LB・LC
43 AX・BX・CX
TRIPLEX
44 AX・BX・CX
Multi-VX
45 RAX・RBX・RCX
MAXSTAR WEDGE SUPREME®
46 3VX・5VX
Multi MAXSTAR WEDGE SUPREME®
47 R3VX・R5VX 48 M・A・B・C
Abrasion resistance
REMF®
50 HM・A・B・BC
Multi- ply
Low noise
MPMF®
51 HM・A・B
Cogged
Abrasion resistance, flex resistance
RECMF®
52 HM・A・B・BC・C・CD
WFC®
53 A, B
49 LA・LB・LC
Raw Edge Cogged (Variable speed)
Lateral pressure resistance
RCVS, SUPER VS®
54 Top width 10mm〜120mm
Lateral pressure resistance, high power transmission
DCVS®
55 Top width 20mm〜120mm
Wrapped (Variable speed)
High power transmission
AGVS®
56 HL・HM
High-speed revolution, compact design POLYMAX
57 3M・5M・7M・11M
High-speed revolution, anti-vibration
58 R5M・R7M・R11M
Multi POLYMAX
Light-duty, clean drive
MB Belt
59 MB
PORT®, HARBOUR® SPECIAL PORT®
60 P・H・SP
Cut edge
Processed joint Good flex resistance
ECHO®, PIONEER®
61 EC・P
Flat belt with V rail
Less stretch and runout
DRY FLEX®
62 AA・O・OW・TN
High-speed drive, compact design
FLEXSTAR®
63 FL・FM・FH・FLEG・FLG・FLE・FMG・FHG
High tensile force
SUPER FLEXSTAR®
Cord core flat type
Press
27 HTD5M・HTD8M・HTD14M
Plain
Round edge Rubber
11 H8M, H14M
Heavy duty power transmission
BARE-BACK® V
ThermoWide-angle setting polyurethane Cogged type
General use
Direct Connected Power Transmission
2 S8M・S14M
SUPER TORQUE G Double Timing
Wide-angle cogged Especially for small diesel automotives
General use, agricultural use
9
SUPER TORQUE G
Multi-pulley, double-sided drive
Rubber dust free, belt clutch
Flat
Automotive use
Type
1 S2M・S3M・S5M
Standard type Narrow width type
Home appliances, agricultural use
Direct Connected Power Transmission
Raw Edge Cogged
Less thickness type
No
SUPER TORQUE G
Notched type Energy-saving
Less thickness
Note: Take slip ratio as approx. 1%
Product Name
High power transmission, heat resistance, water resistance, flex fatigue resistance
High power transmission, heat, water and flex fatigue resistance H Series
General use
Some slip is allowed.
Mitsuboshi Products Lineup for Power Transmission Belts Features
Cord core flat No cord and canvas flat type
Rib
Flex resistance, high power transmission, high-speed revolution
RIBSTAR G
Flex resistance, high-speed revolution
RIBSTAR U
Laminated flat type
Hexagonal
Multi-pulley, double-sided drive
Standard perforated V rope Adjustable belt length
64 FU・FW・FY 65 J8GA・J8GE・J8H・J8HB・J6H・J6HB・J3H・J3HB
Good driving stability, compact design, maintenancefree
FLEXSTAR® Belt J
66 JL・JLB・JL3 67 JN 68 JU・JLU5・JLU6
RIBSTAR G (Bare-back type)
69 HB 70 J・PK・L 71 PK 72 HB・JT・JBT・J
HEXAGONAL V-Belt
73 AA・BB・CC
Perforated V-Belt
74 M・A・B・C
STARROPE®
75 Φ2〜Φ10・Φ12・Φ15
SUPER STARROPE®
76 Φ2〜Φ10・Φ12・Φ15
Round rope
Light-duty use
V rope
Adjustable belt length , processed joint
PRENE V-ROPE
77 M・A・B
Hexagonal rope
PRENE HEXAGONAL-ROPE
78 AA・BB
Agricultural use (for vegetable harvester)
Rubber
Sponge backing type
Sponge backing
Sponge backing V-Belt
79 LA・LB・LC
Agricultural use (for straw conveyor)
Rubber
Standard type
Back protrusion for straw conveying
V-Belt with lugs
80 A・B・C
general use, Office & Home appliance, Coupling agricultural use Office appliance, precision machinery
Steel Aluminum Cast lron Aluminum
Flexible, Direct Connected Power Transmission
Shock absorption, anti-vibration Good attenuation performance
NOR-MEX®
81 G・FG・LG・E・FE・LE
S
82 S・SV・SX・SZ
HYPERFLEX®
83 MT・MH
Chemi-chan®
84 HAS
Selecting Power Transmission Belts and Related Products
Excellent �������������� ● Good ������������� No Sign Caution needed when in use ����� ▲ Not suitable ������������� −
A wide range of products are available at Mitsuboshi to suite your needs. Refer to the following property chart when selecting belts.
Application Properties No
High Compactpowerdesign trasmission
Flexibility
HighSpeed drive
MultiPulley
Environmental Properties
Continuous Joint Smooth Back side speed processing operation drive change
Back side tension
alignment
Frequent Heat Cold Water Oil Acid Alkali Ozone Weather start & resistance resistance resistance resistance resistance resistance resistance resistance stop
Noise
Vibration
No
1
●
●
●
●
一
●
▲
1
2
●
●
●
●
一
●
▲
2
3
●
●
●
▲
3
4
●
●
▲
4
5
●
●
6
●
●
● ●
7
●
●
●
8
●
●
●
9
●
●
●
10
●
●
●
11
●
●
●
●
一
●
一 一
▲
5
●
▲
6
●
▲
一 ● ●
ー
●
●
8
▲
●
●
●
9
ー
●
ー
▲
10
ー
●
ー
▲
11
●
ー
12
●
●
●
●
ー
●
●
●
●
一
▲
14
●
●
●
●
一
▲
15
●
●
16
●
●
17
●
●
●
●
●
●
●
●
18
●
19 20 21
●
●
●
●
●
22
●
●
23
●
●
24
●
●
25
●
●
26
●
27
●
7
●
13
●
●
▲
一
▲
▲
●
一
▲
●
●
●
●
●
●
12 13 14
▲
15
▲
16
▲ 一
●
▲
●
▲
一 ●
17 ● ▲
●
▲
18
▲
19
▲
▲
●
▲
▲
20
▲
▲
●
▲
▲
21
一
●
▲
▲
●
▲
▲
22
一
●
▲
▲
●
▲
▲
23
一
▲
▲
●
▲
▲
24
一
▲
▲
●
▲
▲
25
●
一
▲
▲
●
▲
▲
26
●
●
▲
▲
●
▲
▲
27
●
28
●
●
●
▲
▲
●
▲
▲
28
29
●
●
●
▲
▲
●
▲
▲
29
30
一
31
一
●
一
●
32
一
●
33
32
●
33
●
●
●
一 ●
30
一
31
34
●
●
●
●
35
●
●
一
一
●
●
36
●
●
ー
ー
●
●
37
●
一
●
●
●
38
●
一
●
●
●
34 ● ●
35 36 37
●
38
39
●
●
一
●
●
●
●
39
40
●
●
●
一
●
●
●
●
40
41
●
●
●
一
●
●
●
41
42
●
●
●
一
●
●
●
42
43
●
●
●
44
●
●
●
一
45
●
●
●
一
46
●
●
●
一
47
●
●
●
一
48
▲
一
49
▲
一
50 51
●
52
●
53
●
54 55
● ●
57 58 59
● ●
●
43
●
44
一
● ●
●
一
●
●
●
●
45
●
47
46
●
●
48
●
●
49
●
一
●
●
50
●
一
●
●
51
●
●
一
●
●
52
●
●
一
●
●
53
●
●
54
●
55
●
56
●
一
● ●
●
●
●
▲
●
一
●
●
一
●
●
一
一
一
一
一
一
一
一
一
一
▲
56 ▲
▲
▲
▲
▲
▲
▲
▲
▲
57 ●
58 59
60
▲
●
●
一
60
61
▲
●
●
一
61
62
●
●
63 64
●
● ●
●
62
一
●
一
●
●
一
●
一
●
一
●
一
●
●
63 64
65
●
66
●
●
一
●
一
●
●
66
67
●
●
一
●
一
●
●
67
68
●
●
一
●
一
●
●
68
69
●
●
●
一
●
一
●
●
69
●
●
●
一
●
一
●
●
70
●
●
●
70
●
71
●
72
●
一
●
●
73 74
▲
75
▲
●
一
●
一
●
●
一
●
一
●
▲
一
一
●
一
●
一
●
●
●
●
●
●
●
65
●
71
●
72 73 74
▲
▲
▲
▲
▲
75
76
▲
●
●
一
77
▲
●
●
一
78
▲
●
●
一
79
▲
一
一
80
▲
●
一
81
●
●
●
一
一
●
一
一
一
●
●
●
81
82
●
●
●
一
一
●
一
一
一
●
●
●
82
●
●
●
▲
▲
▲
▲
▲
76
▲
▲
▲
▲
▲
77
▲
▲
▲
▲
▲
78 79 80
83
●
●
一
一
●
一
一
一
84
●
●
一
一
●
一
一
一
●
●
●
83
●
●
84
10
■ Dimensions Model
Cross-Sectional Dimensions
Highest Speed (m/sec)
Type
Rubber
S2M S3M S5M S8M S14M
Pitch (mm) 2.00 3.00 5.00 8.00 14.00
9 13 22 56 125
30 30 30 30 30
Polyurethane
S2M S3M
2.00 3.00
9 13
30 (40) 30 (40)
Rubber
MTS5M MTS8M MTS14M
Pitch (mm) 5.00 8.00 14.00
22 56 125
30 30 30
Polyurethane
MTS8M
Pitch (mm) 8.00
61
30
G8M
Pitch (mm) 8.000
56
30
G14M
Pitch (mm) 14.00
125
30
Rubber
MXL XL L H XH XXH
Pitch (mm) 2.032 5.08 9.525 12.700 22.225 31.750
7 16 30 57 127 182
30 30 30 30 30 30
(40) (40) (40) (40) (40) (40)
Polyurethane
T80 T5・DT5 T10・DT10 XL L
Pitch (mm) 2.032 5.0 10.0 5.08 9.525
7 19 45 16 30
30 30 30 30 30
(40) (40) (40) (40) (40)
Classical V-Belt
Rubber
A B C D E
12.5×9.0×40 16.5×11.0×40 22.0×14.0×40 31.5×10.0×40 38.0×25.5×40
MAXSTAR WEDGE V-Belt
Rubber
3V 5V 8V
9.5×8.0×40 15.9×13.5×40 25.4×22.0×40
67 180 315
40 40 40
Multi MAXSTAR WEDGE V-Belt (Joined V-Belt)
Rubber
3V 5V 8V
− − −
67 180 315
40 40 40
Rubber
J PK L
31.5 (25) 56 (50) 90 (80)
40 (50) 40 (50) 40 (50)
Polyurethane
JT・JBT
Rubber
FL FM FH
POLYMAX Belt
Polyurethane
3M 5M 7M 11M
MB Belt (Polyurethane V-Belt)
Polyurethane
MB
6.0×4.0×40
STARROPE® / SUPER STARROPE®
Polyurethane
2 3 4 5 6 7 8 9 10 12 15
Diameter φmm 2 3 4 5 6 7 8 9 10 12 15
PRENE V-ROPE
Polyurethane
M A B
PRENE HEXAGONAL-ROPE
Polyurethane
AA BB
SUPER TORQUE Timing Belt (Round tooth)
MEGA TORQUE Timing Belt
GIGA TORQUE Timing Belt
Rubber
Timing Belt (Trapezoidal tooth)
RIBSTAR Belt (V-Ribbed Belt)
FLEXSTAR® Belt
top width (mm)×thickness (mm)×angle (°)
Pitch (mm) 2.34 3.56 4.70
95 150 224 355 560
(67) (118) (180) (300) (450)
(40) (40) (40) (40) (40)
30 30 30 30 30
Pitch (mm) 2.34
20
30 (35)
Belt Thickness (mm) 1.5 2.5 3.5
16 40 80
40 (60) 40 (60) 40 (60)
17 26 42 67
40 40 40 40
3.0×2.0×60 5.0×3.0×60 7.0×5.0×60 11.0×7.0×60
16
10
15/ 20 SUPER 20/ 30 30/ 40 40/ 50 50/ 60 60/ 70 70/ 80 85/ 90 95/ 100 120/ 120 150/ 150
10 and below 10 10 10 10 10 10 10 10 10 10
10.0×5.5×40 12.5×8.5×40 16.5×10.5×40
40 85 100
10 and below 10 10
12.5×10.0×40 16.5×12.5×40
100 130
10 and below 10
Note 1 Values in ( ) are only used under limited conditions. Avoid these values as much as possible. The conditions of use such as pulley diameter and speed affect belt durability. (Use the above table as a reference when selecting belts) Note 2 For V-Belt and MAXSTAR WEDGE V-Belt, values are nominal.
11
Minimum Pulley Diameter(mm)
Material
Ⅰ S ynchronous Power Transmission Round Tooth Timing Belt Belt Type, Dimensions & Product Code....... P13 SUPER TORQUE Timing Belt G ............ P14〜16 SUPER TORQUE Timing Pulley. ................... P17 MEGA TORQUE Timing Belt G&U . ......... P18,19 Mega Torque GⅡ. .......................................... P20 Mega Torque EX............................................. P21 Giga Torque GX. ............................................. P22 H Series .......................................................... P23
Trapezoidal Tooth Timing Belt Belt Type, Dimensions & Product Code ...... P24 green eco® Series........................................... P25 Timing Belt G .......................................... P26〜28 Timing Belt U .......................................... P29〜31
LONG-SPAN Timing Belt… …………………… P32 Timing Pulley ………………………………… P33, 34
Synchronous Power Transmission
Round Tooth Timing Belt Belt Type, Dimensions & Product Code Minimum Pulley Size
Product Code
Ⅰ Synchronous Power Transmission
Pitch Line
GB Belt
Belt Type
GB Type (bare back)
Nominal Length (mm) Belt Tooth Pitch 2mm
Belt Width(mm)x10 U(polyurethane) Type
Pitch Line
GB Belt
Belt Tooth Pitch 3mm
Belt Type GB Type (bare back)
Nominal Length (mm) Belt Width(mm)x10 U(polyurethane) Type
Pitch Line
GB Belt
Belt Tooth Pitch 5mm
Belt Type GB Type (bare back)
Nominal Length (mm) Belt Width(mm)x10
Belt Width (mm)x10
Nominal Length (mm)
56.02
Belt Type
Belt Tooth Pitch 8mm
Type
Belt Width (mm)x10
Belt Tooth Pitch 14mm
Nominal Length (mm) Belt Type Type
*1 M inimum pulley diameter / number of teeth depend on revoluation. Use Timing belt catalogue for design.
13
124.78
28
Synchronous Power Transmission
SUPER TORQUE Timing Belt G Since the round tooth shape allows smooth meshing with pulleys, this belt is the most suitable for applications which require high-accuracy and smooth revolution such as computers and office appliances. ● ● ● ●
Improved flexibility of this belt enables use of smaller diameter pulleys Smooth meshing allows noiseless operation Usable with low shaft load Possible to transmit high torque with a small belt.
Standard Belt Sizes
Manufacturable Size
Product Code
GB
Manufacturable Size
Product Code
GB
66 72 74 76 78 80 84 86 88 90
33 36 37 38 39 40 42 43 44 45
66 72 74 76 78 80 84 86 88 90
○ ○ ○ ○ ○ − ○ ○ ○ −
− − − − − ○ − − − ○
S2M 320 S2M 322 S2M 324 S2M 326 S2M 328 S2M 330 S2M 334 S2M 338 S2M 340 S2M 342
160 161 162 163 164 165 167 169 170 171
320 322 324 326 328 330 334 338 340 342
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ − − − − ○ − − − −
S2M 98 S2M 100 S2M 102 S2M 104 S2M 106 S2M 108 S2M 110 S2M 112 S2M 114 S2M 116
49 50 51 52 53 54 55 56 57 58
98 100 102 104 106 108 110 112 114 116
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ − − − − − ○ ○ −
S2M 344 S2M 350 S2M 354 S2M 360 S2M 364 S2M 370 S2M 372 S2M 374 S2M 376 S2M 380
172 175 177 180 182 185 186 187 188 190
344 350 354 360 364 370 372 374 376 380
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − ○ − ○ − − − −
S2M 118 S2M 120 S2M 122 S2M 124 S2M 126 S2M 128 S2M 130 S2M 132 S2M 134 S2M 136
59 60 61 62 63 64 65 66 67 68
118 120 122 124 126 128 130 132 134 136
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ − ○ − ○ − − −
S2M 386 S2M 390 S2M 396 S2M 400 S2M 402 S2M 408 S2M 410 S2M 420 S2M 426 S2M 430
193 195 198 200 201 204 205 210 213 215
386 390 396 400 402 408 410 420 426 430
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − ○ − − − − − − −
S2M 138 S2M 140 S2M 142 S2M 144 S2M 146 S2M 148 S2M 150 S2M 152 S2M 156 S2M 158
69 70 71 72 73 74 75 76 78 79
138 140 142 144 146 148 150 152 156 158
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ − ○ − − − ○ − ○
S2M 434 S2M 436 S2M 438 S2M 440 S2M 442 S2M 444 S2M 448 S2M 452 S2M 456 S2M 460
217 218 219 220 221 222 224 226 228 230
434 436 438 440 442 444 448 452 456 460
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − − − − ○ − − −
S2M 160 S2M 164 S2M 166 S2M 168 S2M 170 S2M 172 S2M 174 S2M 176 S2M 178 S2M 180
80 82 83 84 85 86 87 88 89 90
160 164 166 168 170 172 174 176 178 180
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ − − ○ − − − −
S2M 464 S2M 468 S2M 474 S2M 476 S2M 480 S2M 486 S2M 488 S2M 494 S2M 500 S2M 520
232 234 237 238 240 243 244 247 250 260
464 468 474 476 480 486 488 494 500 520
○ ○ ○ ○ ○ ○ − ○ ○ ○
− − − − − ○ ○ − − ○
S2M 182 S2M 184 S2M 186 S2M 188 S2M 190 S2M 192 S2M 194 S2M 196 S2M 198 S2M 200
91 92 93 94 95 96 97 98 99 100
182 184 186 188 190 192 194 196 198 200
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − ○ − ○ − − ○
S2M 524 S2M 530 S2M 550 S2M 560 S2M 572 S2M 580 S2M 586 S2M 594 S2M 600 S2M 630
262 265 275 280 286 290 293 297 300 315
524 530 550 560 572 580 586 594 600 630
○ ○ ○ ○ ○ − ○ ○ ○ ○
− − − ○ ○ ○ − − − ○
S2M 202 S2M 204 S2M 206 S2M 208 S2M 210 S2M 212 S2M 214 S2M 216 S2M 218 S2M 220
101 102 103 104 105 106 107 108 109 110
202 204 206 208 210 212 214 216 218 220
○ ○ ○ ○ ○ ○ ○ ○ − ○
− − − − ○ ○ − − ○ ○
S2M 638 S2M 648 S2M 656 S2M 660 S2M 672 S2M 676 S2M 694 S2M 710 S2M 726 S2M 740
319 324 328 330 336 338 347 355 363 370
638 648 656 660 672 676 694 710 726 740
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
S2M 224 S2M 226 S2M 230 S2M 232 S2M 234 S2M 236 S2M 238 S2M 240 S2M 242 S2M 244 S2M 246
112 113 115 116 117 118 119 120 121 122 123
224 226 230 232 234 236 238 240 242 244 246
○ ○ ○ ○ ○ ○ ○ ○ − ○ ○
○ − ○ − − ○ − ○ ○ ○ ○
752 S2M S2M 772 S2M 778 S2M 796 S2M 800 S2M 810 S2M 822 S2M 826 S2M 828 S2M 848
376 386 389 398 400 405 411 413 414 424
752 772 778 796 800 810 822 826 828 848
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
S2M 248 S2M 250 S2M 252 S2M 254 S2M 256 S2M 258 S2M 260 S2M 262 S2M 264 S2M 266
124 125 126 127 128 129 130 131 132 133
248 250 252 254 256 258 260 262 264 266
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − − − − ○ − − −
S2M 856 S2M 862 S2M 866 S2M 880 S2M 882 S2M 898 S2M 900 S2M 910 S2M 930 S2M 944
428 431 433 440 441 449 450 455 465 472
856 862 866 880 882 898 900 910 930 944
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
S2M 268 S2M 270 S2M 272 S2M 276 S2M 278 S2M 280 S2M 284 S2M 286 S2M 288 S2M 290
134 135 136 138 139 140 142 143 144 145
268 270 272 276 278 280 284 286 288 290
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − ○ − − − ○
S2M 950 S2M 976 S2M 984 S2M 1016 S2M 1032 S2M 1062 S2M 1064 S2M 1066 S2M 1100 S2M 1136
475 488 492 508 516 531 532 533 550 568
950 976 984 1,016 1,032 1,062 1,064 1,066 1,100 1,136
○ ○ ○ ○ − ○ ○ ○ ○ ○
− − ○ − ○ − − − − −
S2M 292 S2M 296 S2M 300 S2M 302 S2M 304 S2M 306 S2M 308 S2M 310 S2M 312 S2M 316 S2M 318
146 148 150 151 152 153 154 155 156 158 159
292 296 300 302 304 306 308 310 312 316 318
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − − −
S2M 1140 S2M 1196 S2M 1224 S2M 1250 S2M 1274 S2M 1290 S2M 1330 S2M 1420 S2M 1516 S2M 1524
570 598 612 625 637 645 665 710 758 762
1,140 1,196 1,224 1,250 1,274 1,290 1,330 1,420 1,516 1,524
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − ○ − − − − − −
S2M 1878 S2M 2130
939 1,065
1,878 2,130
○ ○
− −
S2M S2M S2M S2M S2M S2M S2M S2M S2M S2M
For S2M and S3M, polyurethane (U) and rubber (GB) models are available. Choose the appropriate material for your application. GB Sizes not indicated above are also available under limited conditions.
Ⅰ Synchronous Power Transmission
Code(width)
14
Synchronous Power Transmission
SUPER TORQUE Timing Belt G
Standard Belt Sizes
Code(width)
Manufacturable Size
Ⅰ Synchronous Power Transmission
Product Code
15
S3M 96 S3M 102 S3M 114 S3M 117 S3M 120 S3M 123 S3M 129 S3M 132 S3M 135 S3M 141
32 34 38 39 40 41 43 44 45 47
96 102 114 117 120 123 129 132 135 141
S3M 144 S3M 147 S3M 150 S3M 156 S3M 159 S3M 162 S3M 168 S3M 171 S3M 174 S3M 177
48 49 50 52 53 54 56 57 58 59
S3M 180 S3M 186 S3M 189 S3M 192 S3M 195 S3M 198 S3M 201 S3M 204 S3M 207 S3M 210
GB
Manufacturable Size
Product Code
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − ○
(D) S3M 516 (D) S3M 519 (D) S3M 522 (D) S3M 525 (D) S3M 528 (D) S3M 537 (D) S3M 540 (D) S3M 543 (D) S3M 549 (D) S3M 552
172 173 174 175 176 179 180 181 183 184
516 519 522 525 528 537 540 543 549 552
144 147 150 156 159 162 168 171 174 177
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ − − − − ○ − − ○ ○
(D) S3M 558 S3M 561 (D) S3M 564 S3M 570 (D) S3M 573 S3M 576 (D) S3M 579 S3M 582 (D) S3M 588 (D) S3M 591
186 187 188 190 191 192 193 194 196 197
60 62 63 64 65 66 67 68 69 70
180 186 189 192 195 198 201 204 207 210
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ − ○ − − ○
(D) S3M 597 (D) S3M 600 (D) S3M 603 (D) S3M 609 (D) S3M 612 (D) S3M 621 S3M 624 633 (D) S3M (D) S3M 642 645 (D) S3M
S3M 213 S3M 216 S3M 219 S3M 222 S3M 225 S3M 228 S3M 231 S3M 234 S3M 237 S3M 246
71 72 73 74 75 76 77 78 79 82
213 216 219 222 225 228 231 234 237 246
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ − ○ − ○ − − − − ○
S3M 249 S3M 252 S3M 255 S3M 258 S3M 261 S3M 264 S3M 267 S3M 270 S3M 273 S3M 276
83 84 85 86 87 88 89 90 91 92
249 252 255 258 261 264 267 270 273 276
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
S3M 279 S3M 282 S3M 285 S3M 288 (D) S3M 291 300 (D) S3M 303 (D) S3M S3M 306 (D) 309 (D) S3M (D) S3M 312
93 94 95 96 97 100 101 102 103 104
279 282 285 288 291 300 303 306 309 312
(D) S3M 315 (D) S3M 318 S3M 324 (D) S3M 327 (D) S3M 330 (D) S3M 333 (D) S3M 339 S3M 342 345 (D) S3M S3M 348
105 106 108 109 110 111 113 114 115 116
(D) S3M 351 (D) S3M 354 S3M 360 S3M 363 366 (D) S3M 369 (D) S3M 372 (D) S3M 375 (D) S3M S3M 378 384 (D) S3M
GB
Product Code
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − − − ○ ○ − − −
S5M 225 S5M 255 S5M 260 S5M 295 S5M 300 S5M 305 S5M 320 S5M 325 S5M 340 S5M 350
45 51 52 59 60 61 64 65 68 70
225 255 260 295 300 305 320 325 340 350
558 561 564 570 573 576 579 582 588 591
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − ○ − − − − − − ○
199 200 201 203 204 207 208 211 214 215
597 600 603 609 612 621 624 633 642 645
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − − − − − ○ − ○
375 (D) S5M 380 (D) S5M 390 (D) S5M S5M 395 (D) S5M 400 S5M 410 (D) S5M 425 (D) S5M 435 (D) S5M 440 (D) S5M 450
75 76 78 79 80 82 85 87 88 90
375 380 390 395 400 410 425 435 440 450
648 (D) S3M (D) S3M 657 660 (D) S3M 663 (D) S3M 666 (D) S3M (D) S3M 669 (D) S3M 672 681 (D) S3M (D) S3M 687 (D) S3M 693
216 219 220 221 222 223 224 227 229 231
648 657 660 663 666 669 672 681 687 693
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − ○ − −
(D) S5M 460 S5M 470 (D) S5M 475 (D) S5M 490 (D) S5M 500 520 (D) S5M 525 (D) S5M (D) S5M 530 (D) S5M 545 550 (D) S5M
92 94 95 98 100 104 105 106 109 110
460 470 475 490 500 520 525 530 545 550
○ ○ ○ − − ○ − − − ○
699 (D) S3M 720 (D) S3M 726 (D) S3M 741 (D) S3M (D) S3M 744 (D) S3M 750 (D) S3M 753 756 (D) S3M (D) S3M 759 (D) S3M 762
233 240 242 247 248 250 251 252 253 254
699 720 726 741 744 750 753 756 759 762
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − ○ − ○ − − − −
(D) S5M 560 (D) S5M 575 (D) S5M 590 (D) S5M 595 600 (D) S5M (D) S5M 615 625 (D) S5M S5M 640 650 (D) S5M 665 (D) S5M
112 115 118 119 120 123 125 128 130 133
560 575 590 595 600 615 625 640 650 665
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − ○ − ○ − − − ○
(D) S3M 765 (D) S3M 771 774 (D) S3M (D) S3M 786 789 (D) S3M 804 (D) S3M 810 (D) S3M 819 (D) S3M 825 (D) S3M S3M 831
255 257 258 262 263 268 270 273 275 277
765 771 774 786 789 804 810 819 825 831
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
670 (D) S5M 675 (D) S5M 690 (D) S5M 695 (D) S5M 700 (D) S5M 710 (D) S5M (D) S5M 720 725 (D) S5M 730 (D) S5M (D) S5M 740
134 135 138 139 140 142 144 145 146 148
670 675 690 695 700 710 720 725 730 740
315 318 324 327 330 333 339 342 345 348
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − ○ − − − − ○ −
(D) S3M 837 852 (D) S3M 858 (D) S3M 882 (D) S3M (D) S3M 888 894 (D) S3M 900 (D) S3M 909 (D) S3M (D) S3M 918 927 (D) S3M
279 284 286 294 296 298 300 303 306 309
837 852 858 882 888 894 900 909 918 927
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
(D) S5M 750 (D) S5M 765 780 (D) S5M 800 (D) S5M (D) S5M 810 830 (D) S5M (D) S5M 845 850 (D) S5M (D) S5M 870 (D) S5M 890
150 153 156 160 162 166 169 170 174 178
750 765 780 800 810 830 845 850 870 890
117 118 120 121 122 123 124 125 126 128
351 354 360 363 366 369 372 375 378 384
○ ○ ○ ○ ○ ○ ○ ○ − ○
− − ○ ○ − ○ − ○ ○ −
(D) S3M 936 S3M 954 S3M 963 (D) S3M 999 (D) S3M 1005 (D) S3M 1014 1017 (D) S3M (D) S3M 1035 (D) S3M 1050 (D) S3M 1080
312 318 321 333 335 338 339 345 350 360
936 954 963 999 1,005 1,014 1,017 1,035 1,050 1,080
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
900 (D) S5M S5M 930 950 (D) S5M S5M 965 (D) S5M 975 S5M 980 (D) S5M 1000 1025 (D) S5M (D) S5M 1050 (D) S5M 1055
180 186 190 193 195 196 200 205 210 211
900 930 950 965 975 980 1,000 1,025 1,050 1,055
387 (D) S3M 396 (D) S3M 399 (D) S3M S3M 402 405 (D) S3M 408 (D) S3M 414 (D) S3M (D) S3M 417 (D) S3M 420 S3M 423
129 132 133 134 135 136 138 139 140 141
387 396 399 402 405 408 414 417 420 423
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ − ○ ○ ○ − − ○ −
S3M 1113 (D) S3M 1119 (D) S3M 1146 (D) S3M 1152 (D) S3M 1170 1176 (D) S3M (D) S3M 1188 (D) S3M 1203 (D) S3M 1221 1236 (D) S3M
371 373 382 384 390 392 396 401 407 412
1,113 1,119 1,146 1,152 1,170 1,176 1,188 1,203 1,221 1,236
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
(D) S5M 1085 (D) S5M 1090 (D) S5M 1100 1105 (D) S5M 1115 (D) S5M 1120 (D) S5M (D) S5M 1125 (D) S5M 1135 (D) S5M 1145 (D) S5M 1160
217 218 220 221 223 224 225 227 229 232
1,085 1,090 1,100 1,105 1,115 1,120 1,125 1,135 1,145 1,160
(D) S3M 426 (D) S3M 432 (D) S3M 435 (D) S3M 444 (D) S3M 447 (D) S3M 453 (D) S3M 456 (D) S3M 459 (D) S3M 468 (D) S3M 471
142 144 145 148 149 151 152 153 156 157
426 432 435 444 447 453 456 459 468 471
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− ○ − − − ○ − ○ − −
1245 (D) S3M 1260 (D) S3M (D) S3M 1290 (D) S3M 1299 S3M 1305 (D) S3M 1326 (D) S3M 1332 (D) S3M 1374 S3M 1401 (D) S3M 1419
415 420 430 433 435 442 444 458 467 473
1,245 1,260 1,290 1,299 1,305 1,326 1,332 1,374 1,401 1,419
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
− − − − − − − − − −
(D) S5M 1165 (D) S5M 1195 S5M 1200 (D) S5M 1225 (D) S5M 1250 (D) S5M 1270 S5M 1290 S5M 1295 (D) S5M 1350 (D) S5M 1420
233 239 240 245 250 254 258 259 270 284
1,165 1,195 1,200 1,225 1,250 1,270 1,290 1,295 1,350 1,420
474 (D) S3M (D) S3M 480 S3M 483 (D) S3M 486 S3M 489 (D) S3M 492 (D) S3M 498 (D) S3M 501 (D) S3M 504 (D) S3M 507
158 160 161 162 163 164 166 167 168 169
474 480 483 486 489 492 498 501 504 507
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ − ○ − − − − ○ − −
S3M 1422 (D) S3M 1461 (D) S3M 1521 S3M 1560 (D) S3M 1596 S3M 1650 (D) S3M 1680 (D) S3M 1788 (D) S3M 2100 (D) S3M 2115
474 487 507 520 532 550 560 596 700 705
1,422 1,461 1,521 1,560 1,596 1,650 1,680 1,788 2,100 2,115
○ ○ ○ − ○ ○ ○ ○ ○ ○
− − − ○ − − − − − −
(D) S5M 1475 (D) S5M 1500 S5M 1505 (D) S5M 1530 (D) S5M 1595 (D) S5M 1605 S5M 1615 (D) S5M 1680 (D) S5M 1690 (D) S5M 1715
295 300 301 306 319 321 323 336 338 343
1,475 1,500 1,505 1,530 1,595 1,605 1,615 1,680 1,690 1,715
(D) S3M 510 (D) S3M 513
170 171
510 513
○ ○
− −
2250 (D) S3M
750
2,250
○
−
(D) S5M 1800 (D) S5M 1945 (D) S5M 2000 (D) S5M 2145 (D) S5M 2255 S5M 2480 (D) S5M 2525 (D) S5M 2980 (D) S5M 3090
360 389 400 429 451 496 505 596 618
1,800 1,945 2,000 2,145 2,255 2,480 2,525 2,980 3,090
For S1.5M, S2M, and S3M, polyurethane (U) and rubber (GB) models are available. Choose the appropriate material for your application. GB
Synchronous Power Transmission
SUPER TORQUE Timing Belt G Since this round tooth belt has a high power transmission property, it expands existing applications of timing belts significantly. Also, it can be used as an alternative for chains and gears. ● ● ● ●
It can be used in wide applications since it has a higher power transmission. Longer operating life Quiet operation Cost-Efficient
Code(width) Product Code
Product Code
(D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
376 400 408 440 480 496 512 520 528 560
47 50 51 55 60 62 64 65 66 70
376 400 408 440 480 496 512 520 528 560
(D) (D) (D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
584 600 632 640 656 680 712 720 760 800
73 75 79 80 82 85 89 90 95 100
584 600 632 640 656 680 712 720 760 800
(D) (D) (D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
824 840 848 856 880 896 912 920 928 944
103 105 106 107 110 112 114 115 116 118
824 840 848 856 880 896 912 920 928 944
(D) (D) (D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
952 960 976 984 1000 1024 1040 1056 1080 1120
119 120 122 123 125 128 130 132 135 140
952 960 976 984 1,000 1,024 1,040 1,056 1,080 1,120
(D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
1128 1136 1152 1160 1184 1200 1216 1224 1248 1256
141 142 144 145 148 150 152 153 156 157
1,128 1,136 1,152 1,160 1,184 1,200 1,216 1,224 1,248 1,256
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
1280 1296 1304 1312 1320 1352 1360 1384 1400 1424
160 162 163 164 165 169 170 173 175 178
1,280 1,296 1,304 1,312 1,320 1,352 1,360 1,384 1,400 1,424
(D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
1440 1480 1488 1520 1552 1600 1640 1648 1680 1696
180 185 186 190 194 200 205 206 210 212
1,440 1,480 1,488 1,520 1,552 1,600 1,640 1,648 1,680 1,696
(D) (D) (D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
1728 1760 1776 1792 1800 1816 1832 1880 1912 1960
216 220 222 224 225 227 229 235 239 245
1,728 1,760 1,776 1,792 1,800 1,816 1,832 1,880 1,912 1,960
(D) (D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M S8M
2000 2040 2048 2064 2104 2120 2160 2240 2272 2304
250 255 256 258 263 265 270 280 284 288
2,000 2,040 2,048 2,064 2,104 2,120 2,160 2,240 2,272 2,304
(D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M S8M
2376 2400 2496 2600 2800 2920 2944 3048 3200
297 300 312 325 350 365 368 381 400
2,376 2,400 2,496 2,600 2,800 2,920 2,944 3,048 3,200
(D) (D) (D) (D) (D) (D) (D) (D)
S8M S8M S8M S8M S8M S8M S8M S8M
3248 3272 3440 3680 3720 3904 3928 4400
406 409 430 460 465 488 491 550
3,248 3,272 3,440 3,680 3,720 3,904 3,928 4,400
(D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D) (D)
S14M 1008 S14M 1120 S14M 1190 S14M 1246 S14M 1288 (D) S14M 1400 (D) S14M 1470 (D) S14M 1540 (D) S14M 1610 (D) S14M 1652
72 80 85 89 92 100 105 110 115 118
1,008 1,120 1,190 1,246 1,288 1,400 1,470 1,540 1,610 1,652
(D) S14M 1708 (D) S14M 1736 (D) S14M 1750 (D) S14M 1778 (D) S14M 1806 (D) S14M 1890 (D) S14M 1932 (D) S14M 1960 (D) S14M 2002 (D) S14M 2100
122 124 125 127 129 135 138 140 143 150
1,708 1,736 1,750 1,778 1,806 1,890 1,932 1,960 2,002 2,100
(D) S14M 2198 (D) S14M 2240 (D) S14M 2310 (D) S14M 2380 (D) S14M 2450 (D) S14M 2506 (D) S14M 2590 (D) S14M 2660 (D) S14M 2800 (D) S14M 3150
157 160 165 170 175 179 185 190 200 225
2,198 2,240 2,310 2,380 2,450 2,506 2,590 2,660 2,800 3,150
(D) S14M 3360 (D) S14M 3500 (D) S14M 3556 (D) S14M 3850 (D) S14M 4004 (D) S14M 4508 (D) S14M 5012
240 250 254 275 286 322 358
3,360 3,500 3,556 3,850 4,004 4,508 5,012
Ⅰ Synchronous Power Transmission
Standard Belt Sizes
16
Synchronous Power Transmission
SUPER TORQUE Timing Pulley Timing belt power transmission system works the best when belt and pulley smoothly mesh with each other. Our SUPER TORQUE Timing Pulley is made with specially formed tooth shape and fine finishing. Pulley Product Code Example:
P 28 S5M 0100 B
Pulley No. of Pulley Teeth
Ⅰ Synchronous Power Transmission
SUPER TORQUE Standard Pulley Types and Sizes ✫ We add aluminum as a standard pulley for S3M and S5M Belt Type
Standard Sizes
Materials
Pulley Types
Rod Shape
Rod Shape
Shape is a 100mm long round cylinder product. 22 teeth and below sizes of S3M are available only in rod shape and C type. Also, 24 teeth and above sizes are available only in A or B type.
Belt Type
18S8M 18 19S8M 19 20S8M 20 21S8M 21 22S8M 22 24S8M 24 25S8M 25 26S8M 26 28S8M 28 30S8M 30 32S8M 32 34S8M 34 36S8M 36 38S8M 38 40S8M 40 44S8M 44 48S8M 48 50S8M 50 60S8M 60 72S8M (72) 84S8M (84) 96S8M (96) (120) 120S8M
45.84 48.38 50.93 53.48 56.02 61.12 63.66 66.21 71.30 76.39 81.49 86.58 91.67 96.77 101.86 112.05 122.23 127.32 152.79 183.35 213.90 244.46 305.58
44.46 47.01 49.56 52.10 54.65 59.74 62.29 64.84 69.93 75.02 80.12 85.21 90.30 95.39 100.49 110.67 120.86 125.95 151.42 181.97 212.53 243.09 304.21
15・25・ 30・40
15・25・ 30・40・60
− − − −
− 28 − 30 − 32 − 34 − 36 − 40 − 42 − 44 − 48 − 50 − 56 − (60) − (64) − (72) − − − − − 15・25・40・60
P P P P P P P P P P P P P P
28S14M 30S14M 32S14M 34S14M 36S14M 40S14M 42S14M 44S14M 48S14M 50S14M 56S14M 60S14M 64S14M 72S14M
124.78 133.69 142.60 151.52 160.43 178.25 187.17 196.08 213.90 222.82 249.55 267.38 285.21 320.86
121.98 130.90 139.81 148.72 157.63 175.46 184.37 193.28 211.11 220.02 246.76 264.59 282.41 318.06
40・60・80
40・60
− − − − − − − − − − −
− − −
− − −
40・60
25・40・60
we revised the standard item lists in April, 2006.
A and B types are made from steel whereas W type is made from cast metal.
17
Pulley Type
Pulley Width Code (Belt With (mm) x10)
Belt Type
Synchronous Power Transmission
MEGA TORQUE Timing Belt G&U Characteristics of low/high speed torque timing belt ‘MEGA TORQUE’ :
MEGA TORQUE Timing Belt U
MEGA TORQUE Timing Belt G
Standard Belt Sizes MTS5M(Pitch 5mm)
- Tooth Shape & Product Code -
Product Code
Belt Width Code
Belt Width Code
Belt Width Code
MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M
225 255 260 295 300 305 320 325 340 350 370 375 380 390 400 410 425 435 440 450 460 470 475 490 500 520 525 530 545 550 560 575 590 595 600 615 625 640 650 665 670 675 690 695 700 710 720 725 730 740 750 765 780 800 810
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
No. of Teeth
Product Code
45 51 52 59 60 61 64 65 68 70 74 75 76 78 80 82 85 87 88 90 92 94 95 98 100 104 105 106 109 110 112 115 118 119 120 123 125 128 130 133 134 135 138 139 140 142 144 145 146 148 150 153 156 160 162
MTS5M 830 G MTS5M 845 G MTS5M 850 G MTS5M 870 G MTS5M 890 G MTS5M 900 G MTS5M 930 G MTS5M 950 G MTS5M 965 G MTS5M 975 G MTS5M 980 G MTS5M 1000 G MTS5M 1025 G MTS5M 1050 G MTS5M 1055 G MTS5M 1085 G MTS5M 1090 G MTS5M 1100 G MTS5M 1105 G MTS5M 1115 G MTS5M 1120 G MTS5M 1125 G MTS5M 1135 G MTS5M 1145 G MTS5M 1160 G MTS5M 1165 G MTS5M 1195 G MTS5M 1200 G MTS5M 1225 G MTS5M 1250 G MTS5M 1270 G MTS5M 1290 G MTS5M 1295 G MTS5M 1350 G MTS5M 1420 G MTS5M 1475 G MTS5M 1500 G MTS5M 1505 G MTS5M 1530 G MTS5M 1595 G MTS5M 1605 G MTS5M 1615 G MTS5M 1680 G MTS5M 1690 G MTS5M 1715 G MTS5M 1800 G MTS5M 1945 G MTS5M 2000 G MTS5M 2145 G MTS5M 2255 G MTS5M 2480 G MTS5M 2525 G MTS5M 2980 G MTS5M 3090 G
No. of Teeth
166 169 170 174 178 180 186 190 193 195 196 200 205 210 211 217 218 220 221 223 224 225 227 229 232 233 239 240 245 250 254 258 259 270 284 295 300 301 306 319 321 323 336 338 343 360 389 400 429 451 496 505 596 618
Ⅰ Synchronous Power Transmission
MEGA TORQUE Timing Belt G
● Large transmission capacity is achievable, at about 2 times that of SUPER TORQUE G (Rubber) (variation subject to pulley diameter and revolution speed). ● Compact design possible.Compared to SUPER TORQUE G (Rubber), width is approximately 40% smaller on average for the same pulley diameter. ● Pulley of existing models can be used. SUPER TORQUE (S8M, S14M) pulleys can be used as per usual. ∗ Please contact us regarding pulley for MTS5M.
18
Synchronous Power Transmission
MEGA TORQUE Timing Belt G&U
MEGA TORQUE Timing Belt U
Ⅰ Synchronous Power Transmission
Standard Belt Sizes MTS8M (Pitch 8 mm) Product Code
No. of Teeth
MTS8M 528 G MTS8M 560 G MTS8M 584 G MTS8M 600 G MTS8M 632 G MTS8M 640 G MTS8M 656 G MTS8M 712 G MTS8M 720 G MTS8M 760 G MTS8M 800 G MTS8M 824 G MTS8M 840 G MTS8M 848 G MTS8M 856 G MTS8M 880 G MTS8M 896 G MTS8M 912 G MTS8M 920 G MTS8M 928 G MTS8M 944 G MTS8M 952 G MTS8M 960 G MTS8M 976 G MTS8M 984 G MTS8M 1000 G MTS8M 1024 G MTS8M 1040 G MTS8M 1056 G MTS8M 1080 G MTS8M 1120 G MTS8M 1128 G MTS8M 1136 G MTS8M 1152 G MTS8M 1160 G MTS8M 1184 G MTS8M 1200 G MTS8M 1216 G MTS8M 1224 G MTS8M 1248 G MTS8M 1256 G MTS8M 1280 G MTS8M 1296 G MTS8M 1304 G MTS8M 1312 G MTS8M 1320 G MTS8M 1352 G MTS8M 1360 G MTS8M 1384 G
66 70 73 75 79 80 82 89 90 95 100 103 105 106 107 110 112 114 115 116 118 119 120 122 123 125 128 130 132 135 140 141 142 144 145 148 150 152 153 156 157 160 162 163 164 165 169 170 173
MTS14M (Pitch 14 mm)
Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M
1400 1424 1440 1480 1488 1520 1552 1600 1640 1648 1680 1696 1728 1760 1776 1792 1800 1816 1832 1880 1912 1960 2000 2040 2048 2064 2104 2120 2160 2240 2272 2304 2376 2400 2496 2600 2800 2920 2944 3048 3200 3248 3272 3440 3680 3720 3904 3928 4400
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
No. of Teeth
175 178 180 185 186 190 194 200 205 206 210 212 216 220 222 224 225 227 229 235 239 245 250 255 256 258 263 265 270 280 284 288 297 300 312 325 350 365 368 381 400 406 409 430 460 465 488 491 550
Product Code
MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M
1008 1120 1190 1246 1288 1400 1470 1540 1610 1652 1708 1736 1750 1778 1806 1890 1932 1960 2002 2100 2198 2240 2310 2380 2450 2506 2590 2660 2800 3150 3360 3500 3556 3850 4004 4508 5012
No. of Teeth
G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G
72 80 85 89 92 100 105 110 115 118 122 124 125 127 129 135 138 140 143 150 157 160 165 170 175 179 185 190 200 225 240 250 254 275 286 322 358
- Tooth Shape & Product Code -
Reinforcement Fabric
Standard Belt Sizes MTS8M (Pitch 8 mm) Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M ∗ MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M ∗ MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M ∗ MTS8M ∗ MTS8M ● Total
19
560 600 640 680 720 760 800 848 896 960 1000 1056 1120 1200 1280 1328 1360 1440 1520 1600 1696 1792 1888
No. of Teeth
70 75 80 85 90 95 100 106 112 120 125 132 140 150 160 166 170 180 190 200 212 224 236
thickness of belt sizes with ∗ mark is 4.8mm.
Synchronous Power Transmission
Characteristics and advantages of Extra High Torque Timing Belt ● Extra larger power transmission capacity New material cord minimizes belt stretch and produces high power transmission capacity. Power transmission capacity is 1.5 times of MEGA TORQUE G . ● Long operation life Introducing anti-abrasive low friction fabric brings high durability at higher torque. Belt life is 2 times longer than MEGA TORQUE G. ● Low noise Running noise is reduced by 18% from regular timing belt whenyou use specially designed pulley and narrower width belt. * Specially designed pulley is required.
.10
5.30
.20
5.30
R9
3.05
R5
10.20
9.10
5.20
Belt tooth pitch 14mm
Belt tooth pitch 8mm
Standard Belt Width
Standard Belt Width Belt Width Code
Belt Width (mm)
Belt Width Code
Belt Width (mm)
150
15
400
40
250
25
600
60
300
30
800
80
400
40
1000
100
1200
120
60
600
250 MT S8M Belt Width (mm)x10
Ⅰ Synchronous Power Transmission
●MTS14M
●MTS8M
MEGA TORQUE
600 MT S14M 2100 G2
1680 G2
Belt Type Belt Length G2 (mm) Specification
Belt Width MEGA (mm)x10 TORQUE
Belt Type
Belt Length G2 (mm) Specification
Standard Belt Sizes MTS8M (Pitch 8 mm) Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M
528 560 584 600 632 640 656 712 720 760 800 824 840 848 856 880 896 912 920 928 944 952 960 976 984
No. of Teeth
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
66 70 73 75 79 80 82 89 90 95 100 103 105 106 107 110 112 114 115 116 118 119 120 122 123
Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M
1000 1024 1040 1056 1080 1120 1128 1136 1152 1160 1184 1200 1216 1224 1248 1256 1280 1296 1304 1312 1320 1352 1360 1384 1400
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
No. of Teeth
125 128 130 132 135 140 141 142 144 145 148 150 152 153 156 157 160 162 163 164 165 169 170 173 175
Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M
1424 1440 1480 1488 1520 1552 1600 1640 1648 1680 1696 1728 1760 1776 1792 1800 1816 1832 1880 1912 1960 2000 2040 2048 2064
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
No. of Teeth
178 180 185 186 190 194 200 205 206 210 212 216 220 222 224 225 227 229 235 239 245 250 255 256 258
Product Code
MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M MTS8M
2104 2120 2160 2240 2272 2304 2376 2400 2496 2600 2800 2920 2944 3048 3200 3248 3272 3440 3680 3720 3904 3928 4400
No. of Teeth
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
263 265 270 280 284 288 297 300 312 325 350 365 368 381 400 406 409 430 460 465 488 491 550
MTS14M (Pitch 14 mm) Product Code
MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M
1008 1120 1190 1246 1288 1400 1470 1540 1610 1652
No. of Teeth
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
72 80 85 89 92 100 105 110 115 118
Product Code
MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M
1708 1736 1750 1778 1806 1890 1932 1960 2002 2100
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
No. of Teeth
122 124 125 127 129 135 138 140 143 150
Product Code
MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M
2198 2240 2310 2380 2450 2506 2590 2660 2800 3150
G2 G2 G2 G2 G2 G2 G2 G2 G2 G2
No. of Teeth
157 160 165 170 175 179 185 190 200 225
Product Code
MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M MTS14M
3360 3500 3556 3850 4004 4508 5012
No. of Teeth
G2 G2 G2 G2 G2 G2 G2
240 250 254 275 286 322 358
20
Synchronous Power Transmission
Characteristics and advantages of High Precision Positioning Timing Belt
●MTS5M
●MTS3M
3.25
1.95
3.41
.25
1.94
.95
R3
1.14
R1
1.91
Ⅰ Synchronous Power Transmission
● Jumping resistance By introducing extra high modulus cord, belt jumping torque extremely increase thus it prevent belt jumping against sudden acceleration and deceleration. ● High damping characteristic With using extra high modulus cord, damping characteristic is improved. It shorten the time for stopping the belt vibration and makes better accurate positioning efficency. ● High precision of positioning repeatability Less stretch of the belt provides high accuracy of positioning repeatability. Belt positioning efficiency and repeatability extremely increase by using special pulley for minimum backlash.
Belt tooth pitch 5mm
Belt tooth pitch 3mm
Standard Belt Width
Standard Belt Width Belt Width Code
100 Belt Width (mm)x10
Belt Width (mm)
Belt Width Code
6
100
10
100
10
150
15
150
15
250
25
MT S3M 450 EX MEGA TORQUE
100 MT S5M 600 EX
Belt Type Belt Length EX (mm) Specification
Belt Width (mm)x10
Standard Belt Sizes
MEGA TORQUE
21
240 270 300 324 330 360 390 420 450 480 510
EX EX EX EX EX EX EX EX EX EX EX
Belt Type Belt Length EX (mm) Specification
Standard Belt Sizes
MTS3M (Pitch 3 mm) Product Code
MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M MTS3M
Belt Width (mm)
60
MTS5M (Pitch 5 mm)
No. of Teeth
Product Code
No. of Teeth
80 90 100 108 110 120 130 140 150 160 170
MTS3M 540 EX MTS3M 570 EX MTS3M 588 EX MTS3M 600 EX MTS3M 660 EX MTS3M 720 EX MTS3M 780 EX MTS3M 1035 EX MTS3M 1521 EX MTS3M 1788 EX MTS3M 2538 EX
180 190 196 200 220 240 260 345 507 596 846
Product Code
MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M MTS5M
275 300 325 350 400 435 450 500 525 550 575 600 650
EX EX EX EX EX EX EX EX EX EX EX EX EX
No. of Teeth
Product Code
No. of Teeth
55 60 65 70 80 87 90 100 105 110 115 120 130
MTS5M 690 EX MTS5M 700 EX MTS5M 720 EX MTS5M 750 EX MTS5M 800 EX MTS5M 850 EX MTS5M 880 EX MTS5M 900 EX MTS5M 950 EX MTS5M 1000 EX MTS5M 1780 EX MTS5M 3835 EX
138 140 144 150 160 170 176 180 190 200 356 767
Synchronous Power Transmission
● Introducing high modulus but high flexibility carbon cord, this belt shows high tenacity and high flexibility. ● You may expect this belt to minimize space, weight and noize of machinery and equipment by applying narrower belt width compared to regular timing belt. ● This belt can be applied for the applicability of chain drive system.
Belt Belt tooth tooth pitch pitch 8mm 14mm
Belt tooth pitch 8mm
G8M Standard Belt Width Belt Width(mm)
12
15
20
Nominal Width (mm×10)
G 8 M Belt Type
9.80
Belt tooth pitch 14mm
G14M Standard Belt Width 21
25
30
36
40
50
60
62
70
80
Belt Width(mm)
Belt Width Code 120 150 200 210 250 300 360 400 500 600 620 700 800
3 6 0
.40
R9
6.10
.40 R93.2 R
3.50
.2
R3
6.10 3.50 9.80 5.60
●G14M
5.60
●G8M
Ⅰ Synchronous Power Transmission
Dimensions - Tooth Shape & Product Code -
2 4 0 0 Nominal Length (mm)
20
30
37
40
50
60
68
70
80
90
Belt Width Code 200
300
370
400
500
600
680
700
800
900 1000 1150 1250 1300
G X
370
G14 M
210 0
G X
GX Spec.
Nominal Width (mm×10)
Belt Type
Nominal Length (mm)
GX Spec.
Standard Belt Sizes No. of Teeth
G8M 640 G8M 720 G8M 800 G8M 896 G8M 960 G8M 1000 G8M 1040 G8M 1120 G8M 1200 G8M 1224 G8M 1280 G8M 1440 G8M 1600 G8M 1760 G8M 1792
80 90 100 112 120 125 130 140 150 153 160 180 200 220 224
115
125
130
Standard Belt Sizes
G8M Product Code
100
G14M Product Code
G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M G8M
2000 2200 2240 2400 2520 2600 2800 2840 3048 3200 3280 3600 4000 4400 4480
No. of Teeth
Product Code
No. of Teeth
250 275 280 300 315 325 350 355 381 400 410 450 500 550 560
G14M 994 G14M 1120 G14M 1190 G14M 1260 G14M 1400 G14M 1568 G14M 1610 G14M 1750 G14M 1890 G14M 1960 G14M 2100 G14M 2240 G14M 2310 G14M 2380
71 80 85 90 100 112 115 125 135 140 150 160 165 170
Product Code
G14M G14M G14M G14M G14M G14M G14M G14M G14M G14M G14M G14M G14M
2450 2520 2590 2660 2800 3136 3304 3360 3500 3850 3920 4326 4410
No. of Teeth
175 180 185 190 200 224 236 240 250 275 280 309 315
22
Synchronous Power Transmission
H Series Round -shape belt teeth enable the distribution of load stress uniformly over the entire belt tooth. Since the betl tooth engages with the pulley groove without any interference, stress concentration at the root of the belt tooth can be eliminated. This belt can be used as an alternative for chains and gears with next advantages:
Belt Pitch Length
Standard Belt Sizes
23
No. of Teeth
424 H8M 480 H8M 536 H8M 560 H8M 592 H8M 600 H8M 624 H8M 632 H8M 640 H8M 656 H8M 680 H8M 720 H8M 760 H8M 776 H8M 800 H8M 840 H8M 856 H8M 880 H8M 896 H8M 912 H8M 920 H8M 936 H8M 960 H8M 968 H8M 1000 H8M 1040 H8M 1056 H8M 1064 H8M 1080 H8M 1120 H8M 1128 H8M 1152 H8M 1160 H8M 1200 H8M 1224 H8M 1248 H8M
53 60 67 70 74 75 78 79 80 82 85 90 95 97 100 105 107 110 112 114 115 117 120 121 125 130 132 133 135 140 141 144 145 150 153 156
10.13
Belt Pitch Length
Standard Belt Sizes
H8M (Pitch 8 mm) Product Code
6.28
5 .5 R4
3.57
6.20
- Tooth Shape & Product Code -
R2 .7 0
Ⅰ Synchronous Power Transmission
● High power trasmission capacity ● Long operative life ● Quiet operation ● Cost-efficiency
H14M (Pitch 14 mm)
Product Code
1280 1304 1320 1360 1392 1400 1424 1432 1440 1480 1520 1600 1680 1696 1728 1760 1800 1896 1904 1936 2000 2080 2104 2160 2240 2272 2400 2504 2600 2800 3048 3200 3280 3600
H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M H8M
No. of Teeth
Product Code
No. of Teeth
160 163 165 170 174 175 178 179 180 185 190 200 210 212 216 220 225 237 238 242 250 260 263 270 280 284 300 313 325 350 381 400 410 450
784 H14M 826 H14M 924 H14M 966 H14M 1148 H14M 1190 H14M 1344 H14M 1400 H14M 1456 H14M 1512 H14M 1540 H14M 1568 H14M 1610 H14M 1638 H14M 1652 H14M 1680 H14M
56 59 66 69 82 85 96 100 104 108 110 112 115 117 118 120
Product Code
1736 1778 1890 1932 1946 2002 2100 2198 2310 2450 2590 2940 3150 3500 4578
H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M H14M
No. of Teeth
124 127 135 138 139 143 150 157 165 175 185 210 225 250 327
Synchronous Power Transmission
Trapezoidal Tooth Timing Belt Belt Type, Dimensions & Product Code Standard Dimensions
MXL (DMXL) GB
T80 U
XL GB・U (DXL) GB L G・U (DL) G H (DH) G
XH G
XXH G
T5 (DT5) U
T10 (DT10) U
Standard Width Code Width(mm)
3.2 4.8 6.4 9.5 12.7
3.2 4.8 6.4 9.5 12.7
3.2 4.8 6.4 8.0 9.5
3.2 4.8 6.4 8.0 9.5
025 031 037 050
6.4 7.9 9.5 12.7
050 075 100 150
12.7 19.1 25.4 38.1
075 100 150 200 300
19.1 25.4 38.1 50.8 76.2
200 300 400 500 600
50.8 76.2 101.6 127.0 152.4
200 300 400 500 600
50.8 76.2 101.6 127.0 152.4
05 10 15 20
5.0 10.0 15.0 20.0
15 20 25 30 40 50
15.0 20.0 25.0 30.0 40.0 50.0
10 20 30
10.0 20.0 30.0
10 20 30
10.0 20.0 30.0
5mm
AT5 U
5 1. 2 1.
50° 2.5
10mm
AT10 U
0 2. 5 2.
50° 5.0
Product Code
Minimum Pulley Size*1 Pulley Diameter(mm)
No. of teeth
6.47
10
Home sewing machine, typewriter, ATM, coin changer, cash register, printing machine, facsimile, measurement equipment, ticket machine, camera, paper feeder, printer, CPU peripherals, card reader, fish sonar finder, medical measurement equipment, radio-controlled model, audio player, VTR, editing equipment
6.47
10
Printer, copier, car antenna, projector
10
Home sewing machine, Iine printer, medical bed, electrical shaver, auto door, copier, massage machine, editing machine, ticket machine, mower, food processor, calculator, fish sonar finder, blood pump, home meat slicer
12
Vending machine, wiper, packing machine, quenching machine, Iift, ice crusher, industrial drier, automated golf cart, computer, copier, plastic lens polishing machine, food processing machine, seaweed collector
56.60
14
Small milling machine, mower, power generator, compressor, scrap chopper, hole finishing machine, drilling machine, glass bottle making machine, food processing machines, rope coiler, roll coater, mill roll, woodworking machinery
127.34
18
Saw mill, cutting machine, cutter, mixer, pump, welder, centrifuge, drilling machine, oscillating mill, Iathe, wool loom, paper manufacuring machine, textile machine
181.92
18
Blower, high pressure pump, change gear, rod mill, compressor, NC Iathe, vibrator, mixer, abrasive boring machine
19.10
12
Data writer, facsimile, sewing machine
44.56
14
Packaging machine, card reader, textile machine, paper manufacturing machine, NC lathe, conveyor
19.10
12
Machine tools, pumps, textile machinery
47.75
15
Construction machines, pumps, papermaking machines, compressors, textile machinery, sanding machines, machine tools, roller-table conveyor drives.
125 (D) MXL 6.4 Double Type Belt Type
No.of Teeth
Applications
Belt Width(mm)
125 T80 6.4 Belt Width(mm)
No.of Teeth
Belt Type
120 (D) XL 037 Double Type
Belt Width (inch)×100 Belt Type
Belt Length (inch)×10
16.17
510 (D) L 100 Double Type
Belt Width (inch)×100 Belt Type
Belt Length (inch)×10
36.38
510 (D) H 100 Double Type
Belt Width (inch)×100 Belt Type
Belt Length (inch)×10
1120 XH 300 Belt Length (inch)×10
Belt Width (inch)×100
Belt Type
1200 XXH 300 Belt Length (inch)×10
Belt Width (inch)×100
Belt Type
Ⅰ Synchronous Power Transmission
Belt Type
(D) T5 − 20 − 100 Belt Type
No.of Teeth
Double Type Belt Width(mm)
(D) T10 − 20 − 100 Belt Type Double Type
No.of Teeth
Belt Width(mm)
AT5 − 20 − 975 Belt Type
Belt Length(mm)
Belt Width(mm)
AT10 − 20 − 1280 Belt Type
Belt Length(mm) Belt Width(mm)
●GB : Bare Back Rubber Timing Belt ●G : RubberTiming Belt ●U : Polyurethane Timing Belt (Note) 1. Maximum transmission power varies depending on belt width and operating speed with the same belt. The values in above table are for your reference. Please use correct values from relevant design catalog when you design. 2. For G (rubber) type, use heat resistant or oil resistant specification when the belts are used in high temperature (up to 120 ℃) or where oil may contaminate the belts.
24
Synchronous Power Transmission
green eco® Series Environmental-friendly rubber timing belts with EPDM compound rubber use. ● Excellent ozone resistance ● Less dispersion of rubber dust
Ⅰ Synchronous Power Transmission
Standard Dimensions and Product Code Belt Type
Standard Dimensions
Product Code
①
MXL
② ③
① 0.08'' (2.032mm) ② 0.6mm ③ 0.51mm
② ③
① 2.0mm ② 0.6mm ③ 0.76mm
① ②
S3M ③
① 3.0mm ② 0.8mm ③ 1.14mm
① ②
S5M ③
25
Belt Type No. of Teeth
①
S2M
125MXL12.7
① 5.0mm ② 1.5mm ③ 1.91mm
Belt Width (mm)
40S2M160 Belt Type Belt Width (mm) x10 Nominal Length (mm)
100S3M459 Belt Type Belt Width (mm) x10 Nominal Length (mm)
250S5M1125 Belt Type Belt Width (mm) x10 Nominal Length (mm)
Synchronous Power Transmission
Timing Belt G This synchronous transmission belt eliminates the problems of chains and gears. Extra small pitch type fits well for precision equipment and IT systems. ● Thin, lightweight and superior flexibility of this belt allows compact design application. ● It enables efficient high speed power transmission ● Low noise operation compared to chain/gear use ● Cost-Efficient
Belt Type Tooth Pich Code(Width)
Size
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
34 MXL 35 MXL 40 MXL 41 MXL 45 MXL 46 MXL 48 MXL 49 MXL 50 MXL 52 MXL
34 35 40 41 45 46 48 49 50 52
69. 09 71. 12 81. 28 83. 31 91. 44 93. 47 97. 54 99. 57 101. 60 105. 66
112 MXL 114 MXL 115 MXL 118 MXL 120 MXL 121 MXL 122 MXL 123 MXL 125 MXL 126 MXL
112 114 115 118 120 121 122 123 125 126
227. 58 231. 65 233. 68 239. 78 243. 84 245. 87 247. 90 249. 94 254. 00 256. 03
(D) 230 MXL (D) 232 MXL (D) 236 MXL (D) 239 MXL (D) 240 MXL (D) 245 MXL (D) 248 MXL (D) 250 MXL (D) 256 MXL (D) 260 MXL
230 232 236 239 240 245 248 250 256 260
467. 36 471. 42 479. 55 485. 65 487. 68 497. 84 503. 94 508. 00 520. 19 528. 32
(D)438 MXL (D)448 MXL (D)453 MXL (D)464 MXL (D)475 MXL (D)478 MXL (D)487 MXL (D)498 MXL (D)500 MXL 503 MXL
438 448 453 464 475 478 487 498 500 503
890.02 910.34 920.50 942.85 965.20 971.30 989.58 1011.94 1016.00 1022.10
53 MXL 54 MXL 55 MXL 56 MXL 57 MXL 59 MXL 60 MXL 61 MXL 63 MXL 65 MXL
53 54 55 56 57 59 60 61 63 65
107. 70 109. 73 111. 76 113. 79 115. 82 119. 89 121. 92 123. 95 128. 02 132. 08
127 MXL 128 MXL 130 MXL 131 MXL 132 MXL 134 MXL 135 MXL 138 MXL 140 MXL 142 MXL
127 128 130 131 132 134 135 138 140 142
258. 06 260. 10 264. 16 266. 19 268. 22 272. 29 274. 32 280. 42 284. 48 288. 54
(D) 262 MXL (D) 265 MXL (D) 270 MXL (D) 273 MXL (D) 275 MXL (D) 278 MXL (D) 280 MXL (D) 281 MXL (D) 285 MXL (D) 288 MXL
262 265 270 273 275 278 280 281 285 288
532. 38 538. 48 548. 64 554. 74 558. 80 564. 90 568. 96 570. 99 579. 12 585. 22
(D)507 MXL (D)515 MXL (D)516 MXL (D)520 MXL (D)525 MXL (D)535 MXL (D)537 MXL 548 MXL (D)550 MXL (D)569 MXL
507 515 516 520 525 535 537 548 550 569
1030.22 1046.48 1048.51 1056.64 1066.80 1087.12 1091.18 1113.54 1117.60 1156.21
66 MXL 67 MXL 68 MXL 70 MXL 71 MXL 72 MXL 73 MXL 74 MXL 75 MXL 76 MXL
66 67 68 70 71 72 73 74 75 76
134. 11 136. 14 138. 18 142. 24 144. 27 146. 30 148. 34 150. 37 152. 40 154. 43
144 MXL (D)145 MXL (D)146 MXL (D)147 MXL (D)148 MXL (D)150 MXL (D)152 MXL (D)154 MXL (D)155 MXL (D)156 MXL
144 145 146 147 148 150 152 154 155 156
292. 61 294. 64 296. 67 298. 70 300. 74 304. 80 308. 86 312. 93 314. 96 316. 99
(D) 290 MXL (D) 295 MXL (D) 297 MXL (D) 300 MXL (D) 305 MXL (D) 310 MXL (D) 312 MXL (D) 315 MXL (D) 318 MXL (D) 320 MXL
290 295 297 300 305 310 312 315 318 320
589. 28 599. 44 603. 50 609. 60 619. 76 629. 92 633. 98 640. 08 646. 18 650. 24
(D)591 MXL (D)650 MXL (D)705 MXL (D)772 MXL 1369 MXL
591 650 705 772 1369
1200.91 1320.80 1432.56 1568.70 2781.81
77 MXL 78 MXL 79 MXL 80 MXL 81 MXL 82 MXL 83 MXL 85 MXL 86 MXL 87 MXL
77 78 79 80 81 82 83 85 86 87
156. 46 158. 50 160. 53 162. 56 164. 59 166. 62 168. 66 172. 72 174. 75 176. 78
(D)158 MXL (D)160 MXL (D)162 MXL (D)165 MXL (D)170 MXL (D)171 MXL (D)175 MXL (D)184 MXL (D)185 MXL (D)186 MXL
158 160 162 165 170 171 175 184 185 186
321. 06 325. 12 329. 18 335. 28 345. 44 347. 47 355. 60 373. 89 375. 92 377. 95
(D) 324 MXL (D) 330 MXL (D) 332 MXL (D) 334 MXL (D) 336 MXL (D) 337 MXL (D) 338 MXL (D) 339 MXL 344 MXL (D) 347 MXL
324 330 332 334 336 337 338 339 344 347
658. 37 670. 56 674. 62 678. 69 682. 75 684. 78 686. 82 688. 85 699. 01 705. 10
88 MXL 89 MXL 90 MXL 91 MXL 92 MXL 93 MXL 94 MXL 95 MXL 96 MXL 97 MXL
88 89 90 91 92 93 94 95 96 97
178. 82 180. 85 182. 88 184. 91 186. 94 188. 98 191. 01 193. 04 195. 07 197. 10
(D)187 MXL (D)188 MXL (D)190 MXL (D)192 MXL (D)194 MXL (D)195 MXL (D)198 MXL (D)200 MXL (D) 203 MXL (D) 205 MXL
187 188 190 192 194 195 198 200 203 205
379. 98 382. 02 386. 08 390. 14 394. 21 396. 24 402. 34 406. 40 412. 50 416. 56
(D) 348 MXL (D) 350 MXL (D) 355 MXL (D) 359 MXL (D) 364 MXL (D) 365 MXL (D) 367 MXL (D) 372 MXL (D) 380 MXL (D) 386 MXL
348 350 355 359 364 365 367 372 380 386
707. 14 711. 20 721. 36 729. 49 739. 65 741. 68 745. 74 755. 90 772. 16 784. 35
98 MXL 100 MXL 101 MXL 102 MXL 103 MXL 105 MXL 106 MXL 108 MXL 109 MXL 110 MXL
98 100 101 102 103 105 106 108 109 110
199. 14 203. 20 205. 23 207. 26 209. 30 213. 36 215. 39 219. 46 221. 49 223. 52
(D) 210 MXL (D) 212 MXL (D) 219 MXL (D) 220 MXL (D) 221 MXL (D) 222 MXL (D) 224 MXL (D) 226 MXL (D) 227 MXL (D) 228 MXL
210 212 219 220 221 222 224 226 227 228
426. 72 430. 78 445. 01 447. 04 449. 07 451. 10 455. 17 459. 23 461. 26 463. 30
(D) 397 MXL (D) 400 MXL 405 MXL (D) (D) 411 MXL 415 MXL (D) 419 MXL (D) 420 MXL (D) 424 MXL (D) 435 MXL (D) 436 MXL (D)
397 400 405 411 415 419 420 424 435 436
806. 70 812. 80 822. 96 835. 15 843. 28 851. 41 853. 44 861. 57 883. 92 885. 95
Ⅰ Synchronous Power Transmission
Standard Belt Sizes
This belt is usually made-to-order, however please check with us for stock when you place order.
26
Synchronous Power Transmission
Timing Belt G This synchronous transmission belt eliminates the problems of chains and gears. Extra small pitch type fits well for precision equipment and IT systems. ● Thin, lightweight and superior flexibility of this belt allows compact design application. ● It enables efficient high speed power transmission ● Low noise operation compared to chain/gear ● Maintenance-free ● Standard belt can be used in the temperature range between -30°C and +90°C , and it is also conductive
Ⅰ Synchronous Power Transmission
Standard Belt Sizes Belt Type Tooth Pich Code(Width)
Size
27
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
60 XL 64 XL 68 XL 70 XL 74 XL 76 XL 78 XL 80 XL 82 XL 84 XL
30 32 34 35 37 38 39 40 41 42
152. 40 162. 56 172. 72 177. 80 187. 96 193. 04 198. 12 203. 20 208. 28 213. 36
(D) 210 XL (D) 212 XL (D) 216 XL (D) 218 XL (D) 220 XL (D) 228 XL (D) 230 XL (D) 234 XL (D) 236 XL (D) 240 XL
105 106 108 109 110 114 115 117 118 120
533. 40 538. 48 548. 64 553. 72 558. 80 579. 12 584. 20 594. 36 599. 44 609. 60
86 XL 88 XL 90 XL 92 XL 94 XL 96 XL 98 XL 100 XL 102 XL 104 XL
43 44 45 46 47 48 49 50 51 52
218. 44 223. 52 228. 60 233. 68 238. 76 243. 84 248. 92 254. 00 259. 08 264. 16
(D) 250 XL (D) 254 XL (D) 260 XL (D) 270 XL (D) 276 XL (D) 280 XL (D) 282 XL (D) 290 XL (D) 300 XL (D) 310 XL
125 127 130 135 138 140 141 145 150 155
635. 00 645. 16 660. 40 685. 80 701. 04 711. 20 716. 28 736. 60 762. 00 787. 40
106 XL 108 XL 110 XL 112 XL 114 XL 116 XL 118 XL 120 XL 122 XL 124 XL
53 54 55 56 57 58 59 60 61 62
269. 24 274. 32 279. 40 284. 48 289. 56 294. 64 299. 72 304. 80 309. 88 314. 96
(D) 314 XL (D) 320 XL (D) 330 XL 332 XL (D) 340 XL (D) 348 XL (D) 352 XL (D) 360 XL (D) 364 XL (D) 370 XL
157 160 165 166 170 174 176 180 182 185
797. 56 812. 80 838. 20 843. 28 863. 60 883. 92 894. 08 914. 40 924. 56 939. 80
126 XL 128 XL 130 XL 134 XL 136 XL 138 XL 140 XL 142 XL 144 XL 146 XL
63 64 65 67 68 69 70 71 72 73
320. 04 325. 12 330. 20 340. 36 345. 44 350. 52 355. 60 360. 68 365. 76 370. 84
(D) 376 XL (D) 380 XL (D) 384 XL (D) 388 XL (D) 390 XL (D) 396 XL (D) 414 XL (D) 424 XL 450 XL (D) 460 XL
188 190 192 194 195 198 207 212 225 230
955. 04 965. 20 975. 36 985. 52 990. 60 1005. 84 1051. 56 1076. 96 1143. 00 1168. 40
148 XL (D) 150 XL (D) 152 XL (D) 154 XL (D) 156 XL (D) 158 XL (D) 160 XL (D) 162 XL (D) 164 XL (D) 166 XL
74 75 76 77 78 79 80 81 82 83
375. 92 381. 00 386. 08 391. 16 396. 24 401. 32 406. 40 411. 48 416. 56 421. 64
(D) 478 XL (D) 480 XL (D) 490 XL 522 XL 532 XL 540 XL 552 XL 564 XL 592 XL 600 XL
239 240 245 261 266 270 276 282 296 300
1214. 12 1219. 20 1244. 60 1325. 88 1351. 28 1371. 60 1402. 08 1432. 56 1503. 68 1524. 00
(D) 168 XL (D) 170 XL (D) 172 XL (D) 174 XL (D) 176 XL (D) 178 XL (D) 180 XL (D) 182 XL (D) 184 XL (D) 186 XL
84 85 86 87 88 89 90 91 92 93
426. 72 431. 80 436. 88 441. 96 447. 04 452. 12 457. 20 462. 28 467. 36 472. 44
616 XL 630 XL 670 XL 690 XL 754 XL 828 XL 860 XL
308 315 335 345 377 414 430
1564. 64 1600. 20 1701. 80 1752. 60 1915. 16 2103. 12 2184. 40
(D) 188 XL (D) 190 XL (D) 192 XL (D) 194 XL (D) 196 XL (D) 198 XL (D) 200 XL (D) 202 XL (D) 204 XL (D) 206 XL
94 95 96 97 98 99 100 101 102 103
477. 52 482. 60 487. 68 492. 76 497. 84 502. 92 508. 00 513. 08 518. 16 523. 24
Product Code
No.of Belt Pich Teeth Length(mm)
109 L 124 L 135 L 150 L 165 L 173 L 180 L (D) 187 L (D) 210 L (D) 217 L
29 33 36 40 44 46 48 50 56 58
276. 23 314. 33 342. 90 381. 00 419. 10 438. 15 457. 20 476. 25 533. 40 552. 45
(D) 225 L (D) 232 L (D) 240 L (D) 255 L (D) 265 L (D) 270 L (D) 277 L (D) 285 L (D) 300 L (D) 315 L
60 62 64 68 71 72 74 76 80 84
571. 50 590. 55 609. 60 647. 70 676. 28 685. 80 704. 85 723. 90 762. 00 800. 10
(D) 320 L (D) 322 L (D) 334 L (D) 337 L (D) 345 L (D) 360 L (D) 367 L (D) 375 L (D) 382 L (D) 390 L
85 86 89 90 92 96 98 100 102 104
809. 63 819. 15 847. 73 857. 25 876. 30 914. 40 933. 45 952. 50 971. 55 990. 60
(D) 394 L (D) 398 L (D) 420 L (D) 427 L (D) 435 L (D) 450 L (D) 454 L (D) 480 L (D) 510 L (D) 525 L
105 106 112 114 116 120 121 128 136 140
1000. 13 1009. 65 1066. 80 1085. 85 1104. 90 1143. 00 1152. 53 1219. 20 1295. 40 1333. 50
(D) 540 L (D) 548 L (D) 581 L (D) 600 L (D) 630 L (D) 653 L (D) 660 L 697 L 731 L 934 L 1174 L 1264 L
144 146 155 160 168 174 176 186 195 249 313 337
1371. 60 1390. 65 1476. 38 1524. 00 1600. 20 1657. 35 1676. 40 1771. 65 1857. 37 2371. 72 2981. 33 3209. 93
Product Code 225 H 230 H (D) 240 H (D) 245 H (D) 255 H (D) 270 H (D) 280 H (D) 300 H (D) 310 H (D) 315 H (D) 320 H (D) 330 H (D) 340 H (D) 350 H (D) 360 H (D) 370 H (D) 375 H (D) 390 H (D) 400 H (D) 410 H (D) 420 H (D) 430 H (D) 450 H (D) 465 H (D) 480 H (D) 490 H (D) 510 H (D) 530 H (D) 540 H (D) 560 H (D) 565 H (D) 570 H (D) 580 H (D) 600 H (D) 605 H (D) 625 H (D) 630 H (D) 640 H (D) 650 H (D) 660 H (D) 680 H (D) 700 H (D) 730 H (D) 750 H (D) 770 H (D) 800 H (D) 810 H (D) 840 H (D) 850 H (D) 860 H (D) 880 H (D) 900 H (D) 950 H (D)1000 H (D)1020 H (D)1100 H (D)1120 H (D)1130 H (D)1140 H (D)1150 H (D)1160 H (D)1250 H (D)1285 H (D)1325 H (D)1345 H (D)1350 H (D)1360 H (D)1400 H (D)1700 H (D)1765 H
No.of Belt Pich Teeth Length(mm) 45 46 48 49 51 54 56 60 62 63 64 66 68 70 72 74 75 78 80 82 84 86 90 93 96 98 102 106 108 112 113 114 116 120 121 125 126 128 130 132 136 140 146 150 154 160 162 168 170 172 176 180 190 200 204 220 224 226 228 230 232 250 257 265 269 270 272 280 340 353
571. 50 584. 20 609. 60 622. 30 647. 70 685. 80 711. 20 762. 00 787. 40 800. 10 812. 80 838. 20 863. 60 889. 00 914. 40 939. 80 952. 50 990. 60 1016. 00 1041. 40 1066. 80 1092. 20 1143. 00 1181. 10 1219. 20 1244. 60 1295. 40 1346. 20 1371. 60 1422. 40 1435. 10 1447. 80 1473. 20 1524. 00 1536. 70 1587. 50 1600. 20 1625. 60 1651. 00 1676. 40 1727. 20 1778. 00 1854. 20 1905. 00 1955. 80 2032. 00 2057. 40 2133. 60 2159. 00 2184. 40 2235. 20 2286. 00 2413. 00 2540. 00 2590. 80 2794. 00 2844. 80 2870. 20 2895. 60 2921. 00 2946. 40 3175. 00 3263. 90 3365. 50 3416. 30 3429. 00 3454. 40 3556. 00 4318. 00 4483. 10
Synchronous Power Transmission
Timing Belt G
Belt Type Tooth Pich Code(Width) Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Ⅰ Synchronous Power Transmission
Standard Belt Sizes
Size
28
Synchronous Power Transmission
Timing Belt U With its high abrasion resistance and lesser rubber dust dispersion, polyurethane timing belts are suitable for use in places where clean environments are required. ● ● ● ●
The best for light-duty transmission which requires high precision Suitable for paper feeding use because it does not contaminate contact subject. Smooth and quiet operation as it is flexible to fit well in small diameter pulleys. Made-to-order system enables manufacture of special form orders.
Ⅰ Synchronous Power Transmission
Standard Belt Sizes Belt Type Tooth Pich Code(Width)
Size
29
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
30 35 40 45 46
T80 T80 T80 T80 T80
30 35 40 45 46
60. 96 71. 12 81. 28 91. 44 93. 47
104 105 106 108 110
T80 T80 T80 T80 T80
104 105 106 108 110
211. 33 213. 36 215. 39 219. 46 223. 52
220 T80 221 T80 224 T80 225 T80 228 T80
220 221 224 225 228
447. 04 449. 07 455. 17 457. 20 463. 30
358 360 370 380 390
T80 T80 T80 T80 T80
358 360 370 380 390
727.46 731.52 751.84 772.16 792.48
48 50 52 53 54
T80 T80 T80 T80 T80
48 50 52 53 54
97. 54 101. 60 105. 66 107. 70 109. 73
112 114 115 118 120
T80 T80 T80 T80 T80
112 114 115 118 120
227. 58 231. 65 233. 68 239. 78 243. 84
230 232 235 236 239
T80 T80 T80 T80 T80
230 232 235 236 239
467. 36 471. 42 477. 52 479. 55 485. 65
397 400 403 420 434
T80 T80 T80 T80 T80
397 400 403 420 434
806.70 812.80 818.90 853.44 881.89
55 56 57 59 60
T80 T80 T80 T80 T80
55 56 57 59 60
111. 76 113. 79 115. 82 119. 89 121. 92
121 122 123 124 125
T80 T80 T80 T80 T80
121 122 123 124 125
245. 87 247. 90 249. 94 251. 97 254. 00
240 245 248 249 250
T80 T80 T80 T80 T80
240 245 248 249 250
487. 68 497. 84 503. 94 505. 97 508. 00
473 474 500 515 550
T80 T80 T80 T80 T80
473 474 500 515 550
961.14 963.17 1016.00 1046.48 1117.60
63 65 67 68 70
T80 T80 T80 T80 T80
63 65 67 68 70
128. 02 132. 08 136. 14 138. 18 142. 24
126 130 131 132 135
T80 T80 T80 T80 T80
126 130 131 132 135
256. 03 264. 16 266. 19 268. 22 274. 32
255 256 260 262 265
T80 T80 T80 T80 T80
255 256 260 262 265
518. 16 520. 19 528. 32 532. 38 538. 48
583 T80 916 T80
583 916
1184.66 1861.31
71 72 73 74 75
T80 T80 T80 T80 T80
71 72 73 74 75
144. 27 146. 30 148. 34 150. 37 152. 40
140 142 144 145 148
T80 T80 T80 T80 T80
140 142 144 145 148
284. 48 288. 54 292. 61 294. 64 300. 74
270 275 277 279 280
T80 T80 T80 T80 T80
270 275 277 279 280
548. 64 558. 80 562. 86 566. 93 568. 96
77 78 80 81 82
T80 T80 T80 T80 T80
77 78 80 81 82
156. 46 158. 50 162. 56 164. 59 166. 62
150 155 156 157 160
T80 T80 T80 T80 T80
150 155 156 157 160
304. 80 314. 96 316. 99 319. 02 325. 12
285 288 290 295 296
T80 T80 T80 T80 T80
285 288 290 295 296
579. 12 585. 22 589. 28 599. 44 609. 60
83 85 87 88 89
T80 T80 T80 T80 T80
83 85 87 88 89
168. 66 172. 72 176. 78 178. 82 180. 85
165 170 175 180 184
T80 T80 T80 T80 T80
165 170 175 180 184
335. 28 345. 44 355. 60 365. 76 373. 89
300 T80 304 T80 310 T80 312 T80 315 T80
300 304 310 312 315
601. 47 617. 73 629. 92 633. 98 640. 08
90 91 93 94 95
T80 T80 T80 T80 T80
90 91 93 94 95
182. 88 184. 91 188. 98 191. 01 193. 04
185 190 195 200 205
T80 T80 T80 T80 T80
185 190 195 200 205
375. 92 386. 08 396. 24 406. 40 416. 56
318 320 324 330 336
T80 T80 T80 T80 T80
318 320 324 330 336
646. 18 650. 24 658. 37 670. 56 682. 75
97 T80 98 T80 100 T80 102 T80 103 T80
97 98 100 102 103
197. 10 199. 14 203. 20 207. 26 209. 30
208 210 212 215 219
T80 T80 T80 T80 T80
208 210 212 215 219
422. 66 426. 72 430. 78 436. 88 445. 01
340 341 344 350 355
T80 T80 T80 T80 T80
340 341 344 350 355
690. 88 692. 91 699. 01 711. 20 721. 36
Synchronous Power Transmission
Timing Belt U
Belt Type Tooth Pich Code(Width)
Size
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
No.of Belt Pich Teeth Length(mm)
Product Code
Ⅰ Synchronous Power Transmission
Standard Belt Sizes
No.of Belt Pich Teeth Length(mm)
60 XL 64 XL 66 XL 70 XL 76 XL
30 32 33 35 38
152. 40 162. 56 167. 64 177. 80 193. 04
210 XL 212 XL 220 XL 224 XL 230 XL
105 106 110 112 115
533. 40 538. 48 558. 80 568. 96 584. 20
124 L 150 L 165 L 173 L 187 L
33 40 44 46 50
314. 33 381. 00 419. 10 438. 15 476. 25
78 XL 80 XL 84 XL 90 XL 94 XL
39 40 42 45 47
198. 12 203. 20 213. 36 228. 60 238. 76
240 XL 250 XL 254 XL 260 XL 270 XL
120 125 127 130 135
609. 60 635. 00 645. 16 660. 40 685. 80
210 L 225 L 240 L 255 L 270 L
56 60 64 68 72
533. 40 571. 50 609. 60 647. 70 685. 80
100 XL 102 XL 104 XL 106 XL 108 XL
50 51 52 53 54
254. 00 259. 08 264. 16 269. 24 274. 32
290 XL 300 XL 320 XL 330 XL 340 XL
145 150 160 165 170
736. 60 762. 00 812. 80 838. 20 863. 60
285 L 300 L 304 L 322 L 345 L
76 80 81 86 92
723. 90 762. 00 771. 53 819. 15 876. 30
110 XL 114 XL 116 XL 120 XL 124 XL
55 57 58 60 62
279. 40 289. 56 294. 64 304. 80 314. 96
348 XL 352 XL 360 XL 376 XL 384 XL
174 176 180 188 192
883. 92 894. 08 914. 40 955. 04 975. 36
367 L 375 L 390 L 420 L 427 L
98 100 104 112 114
933. 45 952. 50 990. 60 1066. 80 1085. 85
126 XL 128 XL 130 XL 136 XL 140 XL
63 64 65 68 70
320. 04 325. 12 330. 20 345. 44 355. 60
390 XL 396 XL 414 XL 430 XL 460 XL
195 198 207 215 230
990. 60 1005. 84 1051. 56 1092. 20 1168. 40
450 L 480 L 510 L 525 L 540 L
120 128 136 140 144
1143. 00 1219. 20 1295. 40 1333. 50 1371. 60
142 XL 146 XL 148 XL 150 XL 152 XL
71 73 74 75 76
360. 68 370. 84 375. 92 381. 00 386. 08
480 XL 490 XL 512 XL 540 XL 544 XL
240 245 256 270 272
1219. 20 1244. 60 1300. 48 1371. 60 1381. 76
600 L
160
1524. 00
154 XL 160 XL 166 XL 168 XL 170 XL
77 80 83 84 85
391. 16 406. 40 421. 64 426. 72 431. 80
564 XL 630 XL 670 XL 730 XL 842 XL
282 315 335 365 421
1432. 56 1600. 20 1701. 80 1854. 20 2138. 68
176 XL 180 XL 186 XL 190 XL 200 XL
88 90 93 95 100
447. 04 457. 20 472. 44 482. 60 508. 00
33 37 40 43 44
165 185 200 215 220
71 72 73 75 78
355 360 365 375 390
(D)110 112 115 (D)118 (D)120
550 560 575 590 600
(D)170 (D)172 (D)180 (D)188 195
850 860 900 940 975
※ (D)36
37 40 41 44
360 370 400 410 440
(D)80 81 (D) 84 85 88
800 810 840 850 880
114 115 (D)120 (D)121 (D)124
1140 1150 1200 1210 1240
(D)170 175 178 (D)180 (D)188
1700 1750 1780 1800 1880
45 49 50 51 52
225 245 250 255 260
(D) 80 (D) 82 84 85 88
400 410 420 425 440
122 (D)124 125 126 (D)130
610 620 625 630 650
198 200 215 (D)220 (D)228
990 1000 1075 1100 1140
45 50 (D)53 55 56
450 500 530 550 560
89 (D) 90 91 92 94
890 900 910 920 940
(D)125 (D)130 (D)132 (D)135 138
1250 1300 1320 1350 1380
196 216 220 221 225
1960 2160 2200 2210 2250
54 55 56 59 (D)60
270 275 280 295 300
89 (D) 90 91 (D) 92 95
445 450 455 460 475
132 135 138 (D)140 144
660 675 690 700 720
243 276 288
1215 1380 1440
(D)60 61 (D)63 65 (D)66
600 610 630 650 660
95 96 97 (D) 98 (D) 100
950 960 970 980 1000
139 (D)140 (D)142 144 145
1390 1400 1420 1450
61 65 66 68 (D)70
305 325 330 340 350
(D) 96 (D) 100 102 ※ (D) 103 105
480 500 510 515 525
145 (D)150 156 (D)160 (D)163
725 750 780 800 815
69 (D)70 (D)72 (D)75 78
690 700 720 750 780
101 105 108 (D) 110 111
1010 1050 1080 1100 1110
146 (D)150 156 (D)160 (D)161
1460 1500 1560 1600 1610
109
545
168
840
30
Ⅰ Synchronous Power Transmission
Synchronous Power Transmission
Standard Belt Sizes Belt Type
AT5
AT10
Tooth Pitch
5.0(mm)
10.0(mm)
Code(Width)
10(10.0mm) 20(20.0mm) 30(30.0mm)
10(10.0mm) 20(20.0mm) 30(30.0mm)
Size
31
! w e N
No.of Teeth
Belt Pitch Length(mm)
No.of Teeth
Belt Pitch Length(mm)
60 68 75 78 84 90 100 109 120 122 132 142 144 150 156 172 195 210 300
300 340 375 390 420 450 500 545 600 610 660 710 720 750 780 860 975 1050 1500
61 66 70 78 80 84 89 92 98 105 108 110 115 120 121 125 128 132 140 148 160 180 186 194
610 660 700 780 800 840 890 920 980 1050 1080 1100 1150 1200 1210 1250 1280 1320 1400 1480 1600 1800 1860 1940
Synchronous Power Transmission
LONG-SPAN Timing Belt (Open-End & Endless) This belt is for long-span linear drives and light-duty synchronous transmission and transportation. ● Freer design possible as the length can be extended.
Size Range for Open-End Type
x100
6.4
9.5
12.7
19.1
25.4
38.1
025
037
050
075
100
150
67
44
34
−
−
−
129
86
64
−
−
−
−
−
72
47
34
−
−
−
129
86
63
41
Belt Width (inch x100) Belt Type Belt Length (m)
Ⅰ Synchronous Power Transmission
● Rubber Timing Belt
For MXL type, belt width is in mm
4
6
10
15
20
25
30
40
50
60
S2M
89
58
35
−
−
−
−
−
−
−
S3M
−
110
65
43
−
−
−
−
−
−
S5M
−
−
78
50
87
68
−
−
−
−
S8M
−
−
124
82
60
48
55
39
30
24
S14M
−
−
−
−
−
58
48
34
27
−
Belt Length (m) Belt Type Belt Width (mm x100)
Size Range for Endless Type
L
12.7
355
20.0
H
19.1
343
20.0
XH
50.8
406
20.0
XXH
50.8
406
20.0
S8M
19.0
342
20.0
S14M
50.0
406
20.0
Belt Width (inch x100) Belt Type Belt Length (inch x10)
Belt Length (mm) Belt Type Belt Width (mm x10)
● Thermosetting Polyurethane Timing Belt Size Range for Open-End Type 6.4
9.5
12.7
19.1
025
037
050
075
T80
52
35
−
−
XL
71
48
36
17
L
−
51
38
10
Belt Length (m) Belt Width (mm) Belt Type For XL and L types, belt width is indicated as (inch x100)
5
10
15
20
25
T5
87
44
29
−
−
T10
−
49
32
17
13
4
5
6
10
15
20
25
S2M
99
80
67
−
−
−
−
S3M
−
98
82
50
33
−
−
Belt Length (m) Belt Width (mm x10) Belt Type
32
Synchronous Power Transmission
Timing Pulley Timing belt power transmission systems work the best when high-accuracy belts and precisely processed pulleys smoothly mesh with each other. ● Cutting with hob cutter enables good power transmission. ● MBL accepts your request for material, form and processing method. ● Flange is not sold separately as a single item.
Ⅰ Synchronous Power Transmission
Standard Pulley Types & Sizes Belt Type No. of Teeth
MXL-Rod shape Length (mm)
Pulley Type
100 100 100 100 100 100 100 100 100 100
10 11 12 14 15 16 18 19 20 21
C C C C C B B B B B
MXL MXL MXL MXL MXL MXL MXL MXL MXL MXL
100 100 100 100 100 100 100 100 100 100
MXL MXL MXL MXL MXL MXL MXL MXL MXL MXL
100 100 100 100 100 100 100 100 100 100
22 24 25 26 28 30 32 34 36 38 40 42 44 48 50
B B B B B B A・B A・B A・B A・B A・B A・B A・B W W
60 72
W W
10 12 13 14 15 16 17 18 19 20
5.96 7.25 7.90 8.55 9.19 9.84 10.49 11.13 11.78 12.43
6.47 7.76 8.41 9.06 9.70 10.35 11.00 11.64 12.29 12.94
P10 P12 P13 P14 P15 P16 P17 P18 P19 P20
MXL MXL MXL MXL MXL MXL MXL MXL MXL MXL
21 22 23 24 25 26 27 28 30 32
13.07 13.72 14.37 15.02 15.66 16.31 16.96 17.60 18.90 20.19
13.58 14.23 14.88 15.52 16.17 16.82 17.46 18.11 19.40 20.70
P21 P22 P23 P24 P25 P26 P27 P28 P30 P32
21.48 22.78 24.07 25.36 26.66 27.95 30.54 31.83 33.13 34.42
21.99 23.29 24.58 25.87 27.17 28.46 31.05 32.34 33.63 34.93
P34 P36 P38 P40 P42 P44 P48 P50 P52 P54
35.71 38.30 40.89 44.77 46.06 51.24 53.82 61.59 64.17 77.11
36.22 38.81 41.40 45.28 46.57 51.74 54.33 62.09 64.68 77.62
100
Material
HighStrength Aluminum Alloy
56 60 64 70 72 80 84 96 100 120
Belt Type
Product Code
P56 MXL 100 P60 MXL 100 P64 MXL 100 P70 MXL 100 P72 MXL 100 P80 MXL 100 P84 MXL 100 P96 MXL 100 P100 MXL 100 P120 MXL 100
MXL for Belt Width − 6.4mm
No. of Teeth
Length (mm)
20 21 22 23 24 25 26 27 28 30
B B B B B B B B B B
32 36 40 48 60 72 84 96 120
B B B B B B B B B
Material
HighStrength Aluminum Alloy
OD (mm)
PD (mm)
12.43 13.07 13.72 14.37 15.02 15.66 16.31 16.96 17.60 18.90
12.94 13.58 14.23 14.88 15.52 16.17 16.82 17.46 18.11 19.40
20.19 22.78 25.36 30.54 38.30 46.06 53.82 61.59 77.11
20.70 23.29 25.87 31.05 38.81 46.57 54.33 62.09 77.62
Product Code P20 P21 P22 P23 P24 P25 P26 P27 P28 P30
XL
No. of Teeth
PD (mm)
34 36 38 40 42 44 48 50 52 54
33
Belt Type
OD (mm)
MXL MXL MXL MXL MXL MXL MXL MXL MXL MXL
6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4
P32 MXL 6.4 P36 MXL 6.4 P40 MXL 6.4 P48 MXL 6.4 P60 MXL 6.4 P72 MXL 6.4 P84 MXL 6.4 P96 MXL 6.4 P120 MXL 6.4
Material
Sintered Material
Steel
Cast Metal
OD (mm)
PD (mm)
15.66 17.28 18.90 22.13 23.75 25.36 28.60 30.22 31.83 33.45
16.17 17.79 19.40 22.64 24.46 25.87 29.11 30.72 32.34 33.96
10 11 12 14 15 16 18 19 20 21
XL XL XL XL XL XL XL XL XL XL
037 037 037 037 037 037 037 037 037 037
35.07 38.30 39.92 41.53 44.77 48.00 51.24 54.47 57.70 60.94 64.17 67.41 70.64 77.11 80.34
35.57 38.81 40.43 42.04 45.28 48.51 51.74 54.98 58.21 61.45 64.68 67.91 71.15 77.62 80.85
22 24 25 26 28 30 32 34 36 38 40 42 44 48 50
XL XL XL XL XL XL XL XL XL XL XL XL XL XL XL
037 037 037 037 037 037 037 037 037 037 037 037 037 037 037
96.51 115.92
97.02 116.43
60 XL 037 72 XL 037
OD (mm)
PD (mm)
Belt Type
Product Code
L
No. of Teeth
Pulley Type
10 12 14 15 16
A・B A・B A・B A・B A・B
29.56 35.62 41.68 44.72 47.75
30.32 36.38 42.45 45.48 48.51
10 12 14 15 16
L L L L L
050 050 050 050 050
12 14 15 16
L L L L
075 075 075 075
14 L 100 15 L 100 16 L 100
17 18 19 20 21
A・B A・B A・B A・B A・B
50.78 53.81 56.84 59.88 62.91
51.54 54.57 57.61 60.64 63.67
17 18 19 20 21
L L L L L
050 050 050 050 050
17 18 19 20 21
L L L L L
075 075 075 075 075
17 18 19 20 21
L L L L L
100 100 100 100 100
22 24 25 26 28
A・B A・B A・B A・B A・B
65.94 72.00 75.04 78.07 84.13
66.70 72.77 75.80 78.83 84.89
22 24 25 26 28
L L L L L
050 050 050 050 050
22 24 25 26 28
L L L L L
075 075 075 075 075
22 24 25 26 28
L L L L L
100 100 100 100 100
30 32 34 36 38
A・B A・B A・B A・B A・B
90.20 96.26 102.32 108.39 114.45
90.96 97.02 103.08 109.15 115.21
30 32 34 36 38
L L L L L
050 050 050 050 050
30 32 34 36 38
L L L L L
075 075 075 075 075
30 32 34 36 38
L L L L L
100 100 100 100 100
40 44 48 50 60
A・B A・B W W W
120.51 132.64 144.77 150.83 181.15
121.28 133.40 145.53 151.60 181.91
40 44 48 50 60
L L L L L
050 050 050 050 050
40 44 48 50 60
L L L L L
075 075 075 075 075
40 44 48 50 60
L L L L L
100 100 100 100 100
72
W
217.53
218.30
72 L 050
Material
Steel
Cast Metal
Product Code
72 L 075
72 L 100
Timing Pulley
Pulley Product Code
38 XL 037 B
(Example)
Pulley Type Form No. of Teeth
Belt Width (inch x 100) (Note: belt width is in mm for MXL type)
Belt Type Add “P” in front of the product code for MXL type (Ex) P26MXL6.4B
Tooth profile for standard pulleys is in-volute shape complying with ISO standards.
Standard Pulley Types & Sizes Belt Type
H
No. of Teeth
Pulley Type
14 15 16 18 19
Belt Type Pulley Type
14H200 15H200 16H200 18H200 19H200
12 14 15 16 18
C C C B B
20H150 21H150 22H150 24H150 25H150
20H200 21H200 22H200 24H200 25H200
20 22 24 25 26
B B B B B
26H100 28H100 30H100 32H100 34H100
26H150 28H150 30H150 32H150 34H150
26H200 28H200 30H200 32H200 34H200
28 30 32 36 40
B B A・B A・B A・B
145.53 161.70 177.87 194.04 202.13
36H100 40H100 44H100 48H100 50H100
36H150 40H150 44H150 48H150 50H150
36H200 40H200 44H200 48H200 50H200
44 48 50 60
W W W W
242.55 291.06
60H100 72H100
60H150 72H150
60H200 72H200
PD (mm)
A・B A・B A・B A・B A・B
55.22 59.27 63.31 71.39 75.44
56.60 60.64 64.68 72.77 76.81
14H100 15H100 16H100 18H100 19H100
14H150 15H150 16H150 18H150 19H150
20 21 22 24 25
A・B A・B A・B A・B A・B
79.48 83.52 87.56 95.65 99.69
80.85 84.89 88.94 97.02 101.06
20H100 21H100 22H100 24H100 25H100
26 28 30 32 34
A・B A・B A・B A・B A・B
103.73 111.82 119.90 127.99 136.07
105.11 113.19 121.28 129.36 137.45
36 40 44 48 50
A・B A・B W W W
144.16 160.33 176.50 192.67 200.76
60 72
W W
241.18 289.69
Material
Steel
Cast Metal
T5
No. of Teeth
OD (mm)
Product Code
Material
Sintered Material
Steel
Cast Metal
OD (mm)
PD (mm)
Product Code
18.25 21.45 23.05 24.60 27.80
19.10 22.28 23.87 25.46 28.65
PT5-10-12 PT5-10-14 PT5-10-15 PT5-10-16 PT5-10-18
31.00 34.25 37.40 39.00 40.60
31.83 35.01 38.20 39.79 41.38
PT5-10-20 PT5-10-22 PT5-10-24 PT5-10-25 PT5-10-26
43.75 46.95 50.10 56.45 62.85
44.56 47.75 50.93 57.30 63.66
PT5-10-28 PT5-10-30 PT5-10-32 PT5-10-36 PT5-10-40
69.20 75.55 78.75 94.65
70.03 76.39 79.58 95.49
PT5-10-44 PT5-10-48 PT5-10-50 PT5-10-60
Belt Type
T10
No. of Teeth
Pulley Type
12 14 15 16 18
OD (mm)
PD (mm)
A・B A・B A・B A・B A・B
36.35 42.70 45.90 49.05 55.45
38.20 44.56 47.75 50.93 57.30
PT10-15-12 PT10-15-14 PT10-15-15 PT10-15-16 PT10-15-18
PT10-25-12 PT10-25-14 PT10-25-15 PT10-25-16 PT10-25-18
20 22 24 25 26
A・B A・B A・B A・B A・B
61.80 68.15 74.55 77.70 80.90
63.66 70.03 76.39 79.58 82.76
PT10-15-20 PT10-15-22 PT10-15-24 PT10-15-25 PT10-15-26
PT10-25-20 PT10-25-22 PT10-25-24 PT10-25-25 PT10-25-26
28 30 32 36 40
A・B A・B A・B A・B A・B
87.25 93.65 100.00 112.75 125.45
89.13 95.49 101.86 114.59 127.32
PT10-15-28 PT10-15-30 PT10-15-32 PT10-15-36 PT10-15-40
PT10-25-28 PT10-25-30 PT10-25-32 PT10-25-36 PT10-25-40
44 48 50 60
W W W W
138.20 150.95 157.30 189.10
140.06 152.79 159.15 190.99
PT10-15-44 PT10-15-48 PT10-15-50 PT10-15-60
PT10-25-44 PT10-25-48 PT10-25-50 PT10-25-60
Material
Steel
Cast Metal
Product Code
34
Ⅱ F rictional Forced Power Transmission Belt Classical V-Belt / Red label V-Belt����������������������� P36 Classical V-Belts for DIN 2215/ISO4184 Wrapped Type��������������������������������������������������������� P37 Classical V-Belts for DIN 2215/ISO4184 TRIPLEX® Raw Edge Cogged Type��������������� P38〜40 MAXSTAR WEDGE V-Belt�������������������������������������� P41 MAXSTAR WEDGE V-Belt for RMA / MPTA��������� P42 Narrow V-Belt for DIN7753 / ISO4184������������������ P43 SUPER VS® Belt (Variable Speed Belt)����������������� P44 MAXSTAR WEDGE Bushing Pulley����������������� P45, 46 e-Power® V-Belt������������������������������������������������������ P47 RIBSTAR Belt G (Rubber V-Ribbed Belt)�������������� P48 RIBSTAR Belt U (Polyurethane V-Ribbed Belt)���� P49 RIBSTAR Pulley (V-Ribbed Pulley)������������������������ P50 FLEXSTAR® Belt������������������������������������������������������ P51 SUPER FLEXSTAR® Belt����������������������������������������� P52 FLEXSTAR® Belt J��������������������������������������������������� P53 POLYMAX® Belt������������������������������������������������������� P54 MB Belt�������������������������������������������������������������������� P55 STARROPE®, SUPER STARROPE®������������������������ P56 PRENE V-ROPE, PRENE HEXAGONAL-ROPE����� P56 Flat Belt������������������������������������������������������������������� P57
Frictional Forced Power Transmission Belt
Classical V-Belt/ Red label V-Belt This type is most commonly used as a means for power transmission. Therefore, it is economic and available in the market. Also, it is easily replaced. ● Our “SET FREE®” system for multiple belt usage is very effective to reduce dimensional differences of each belt. ● Red label V-Belt is a heavy-duty power transmission belt, which has heat, oil and flex resistance as well as a high antistatic property
A-50
Product Code
Belt Type
A
B
C
D
E
(Note) Above dimensions are nominal values.
Ⅱ Frictional Forced Power Transmission Belt
Cross-Sectional Dimensions
M
Belt Code (inch)
● Belt code indicates effective pitch length of the belt in inches. (For M type, length is outer circumference)
Standard Belt Sizes
36
Frictional Forced Power Transmission Belt
Classical V-Belts for DIN 2215/ISO4184 Wrapped Type Widely-used power transmission belt. Cost efficient, readily available, easily changeable
A-40
Product Code
Belt Type
Belt Code (inch)
● Belt code is nomial length in inch
40.0mm (11/2")
Cross-Sectional Dimensions 32.0mm (11/4")
13.0mm (1/2")
Ⅱ Frictional Forced Power Transmission Belt
10mm
Z(10) ZX
6mm
40°
A(13) AX
22.0mm (7/8")
17.0mm (21/32")
B(17) BX
9mm (11/32")
40°
11mm (7/16")
14mm (9/16")
40°
40°
Z(10), ZX Inside Length Datum Length Li (mm) Ld (mm)
Belt Code
Inside Length Datum Length Li (mm) Ld (mm)
20
515
537
38.5
975
21
530
552
39.5
1000
40.5
1030
20.5 21.5 22
22.5 23
23.5 24
24.5 25
25.5 26
26.5 27
27.5 28
28.5 29
29.5 30
30.5 31
31.5 32
32.5 33
33.5 34
34.5 35
35.5 36
36.5 37
37.5 38
525 550 560 575 585 600 610 620 630 650 660 670 685 700 710 725 730 750 765 775 790 800 820 825 840 850 865 875 890 900 915 925 940 950 965
547 572 582 597 607 622 632 642 652 672 682 692 707 722 732 747 752 772 787 797 812 822 842 847 862 872 887 897 912 922 937 947 962 972
39 40 41
41.5
1012
1016
1038
1050
42
1060
42.25
1075
42.5
1080
43
1090
43.5 44
45.5
1295 1310 1320
52.5
1330
53
1346
54
1371
55
1400
56
1422
57
1450
58
1475
59
1500
60
1112
1142 1172 1187
1247
1270
52
1102
1225 1250
51.5
1097
1216
49 51
1082
1194
1215
50
1072
1162
47.5 48
1063
1140 1165
47
1052
1127
1150
46
1022
1105 1120
45
997
990
1041
1525
1237 1272 1292 1317 1332 1342 1352 1368 1393 1422 1444 1472 1497 1522 1547
Size range : 18.5" - 93"
987
All dimentions are nominal values. : Available sizes for raw edge cogged belt ZX
D(32)
40°
Standard Belt Sizes
Belt Code
37
C(22) CX
E(40) 20mm (3/4")
40°
25mm (1")
Frictional Forced Power Transmission Belt
Classical V-Belts for DIN 2215/ISO4184 TRIPLEX® Raw Edge Cogged Type Widely-used power transmission belt. Cost efficient, readily available, easily changeable
AX-40
Product Code
Belt Type
Belt Code (inch)
● Belt code is nomial length in inch
Belt Code
Datum Length Ld(mm)
Belt Code
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56
508 535 560 585 610 630 660 686 710 730 767 787 813 838 864 889 914 940 965 990 1016 1041 1060 1100 1120 1143 1168 1200 1220 1250 1270 1300 1320 1350 1375 1400 1422
538 565 590 615 640 660 690 716 740 760 797 817 843 868 894 919 944 970 995 1020 1046 1071 1090 1130 1150 1173 1198 1230 1250 1280 1300 1330 1350 1380 1405 1430 1452
57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93
Inside Length Li(mm) 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1825 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2110 2134 2160 2180 2210 2240 2260 2286 2310 2337 2360
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
1480 1505 1530 1555 1580 1605 1630 1655 1680 1706 1730 1755 1780 1805 1830 1855 1884 1910 1930 1960 1986 2010 2030 2062 2090 2113 2140 2164 2190 2210 2240 2270 2290 2316 2340 2367 2390
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 112 115 116 118 120 122 124 125 128 130 134 135 136 140 144 150 150 158 160 162
2388 2413 2438 2464 2500 2515 2540 2565 2591 2616 2650 2667 2692 2725 2743 2769 2800 2845 2921 2946 3000 3048 3100 3150 3175 3250 3300 3400 3425 3454 3550 3658 3810 3810 4000 4064 4115
2418 2443 2468 2494 2530 2545 2570 2595 2621 2646 2680 2697 2722 2755 2773 2799 2830 2875 2951 2976 3030 3078 3130 3180 3205 3280 3330 3430 3455 3484 3580 3688 3840 3840 4030 4094 4145
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
165 167 170 173 176 180 185 187 190 195 197 200
4200 4250 4318 4394 4470 4572 4700 4750 4825 4950 5000 5080
4230 4280 4348 4424 4500 4602 4730 4780 4855 4980 5030 5110
Ⅱ Frictional Forced Power Transmission Belt
A(13), AX Inside Length Li(mm)
Size range : 20" - 360"
All dimentions are nominal values. : Available sizes for raw edge cogged belt AX
B(17), BX Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
20 21 22 23 24 25 26 27 28 29 30 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54
510 535 560 585 615 630 660 686 710 735 762 735 762 785 813 838 865 889 915 940 965 991 1016 1040 1060 1090 1120 1150 1175 1200 1215 1250 1275 1300 1320 1350 1372
553 578 603 628 658 673 703 729 753 778 805 778 805 828 856 881 908 932 958 983 1008 1034 1059 1083 1103 1133 1163 1193 1218 1243 1258 1293 1318 1343 1363 1393 1415
55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91
Inside Length Li(mm) 1400 1425 1450 1475 1500 1525 1550 1575 1600 1625 1650 1675 1700 1725 1750 1775 1800 1825 1850 1880 1900 1930 1950 1981 2000 2032 2060 2083 2100 2134 2160 2200 2210 2240 2260 2286 2300
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
1443 1468 1493 1518 1543 1568 1593 1618 1643 1668 1693 1718 1743 1768 1793 1818 1843 1868 1893 1923 1943 1973 1993 2024 2043 2075 2103 2126 2143 2177 2203 2243 2253 2283 2303 2329 2343
92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 110 112 113 114 115 116 117 118 120 122 124 125 126 128 130 132 133 134 135 136
2337 2360 2388 2413 2438 2465 2500 2515 2540 2565 2600 2616 2650 2667 2700 2718 2750 2800 2845 2870 2900 2921 2950 2972 3000 3048 3099 3150 3175 3200 3250 3300 3350 3375 3400 3425 3450
2380 2403 2431 2456 2481 2508 2543 2558 2583 2608 2643 2659 2693 2710 2743 2761 2793 2843 2888 2913 2943 2964 2993 3015 3043 3091 3142 3193 3218 3243 3293 3343 3393 3418 3443 3468 3493
138 140 142 144 145 146 148 150 152 154 155 156 158 160 162 164 165 166 169 170 173 175 177 180 185 188 190 192 195 197 200 204 205 210 215 218 220
Inside Length Li(mm) 3500 3550 3600 3658 3675 3700 3750 3810 3861 3912 3937 3950 4000 4065 4115 4165 4200 4215 4300 4318 4394 4450 4500 4572 4700 4775 4826 4875 4953 5000 5080 5182 5200 5334 5450 5540 5600
Datum Length Ld(mm) 3543 3593 3643 3701 3718 3743 3793 3853 3904 3955 3980 3993 4043 4108 4158 4208 4243 4258 4343 4361 4437 4493 4543 4615 4743 4818 4869 4918 4996 5043 5123 5225 5243 5377 5493 5583 5643
Belt Code 225 228 230 232 236 238 240 245 248 250 255 260 264 268 270 276 280 290 300 310 320 330 340 350 360 370 380 390 400
Inside Length Li(mm)
Datum Length Ld(mm)
5700 5800 5850 5893 6000 6045 6096 6225 6300 6350 6475 6600 6700 6800 6850 7000 7100 7360 7620 7875 8125 8375 8640 8900 9150 9400 9650 9900 10160
5743 5843 5893 5936 6043 6088 6139 6268 6343 6393 6518 6643 6743 6843 6893 7043 7143 7403 7663 7918 8168 8418 8683 8943 9193 9443 9693 9943 10203
Size range : 20" - 660"
All dimentions are nominal values. : Available sizes for raw edge cogged belt BX
38
Frictional Forced Power Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
Ⅱ Frictional Forced Power Transmission Belt
C(22), CX Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
30
762
814
31
787
839
67
1700
32
813
865
68
1725
33
838
890
69
1750
34
864
916
70
1775
35
889
941
71
1800
36
914
966
72
1829
37
940
992
73
1854
38
950
1002
39
975
1027
40
1000
1052
41
1030
1082
42
1075
1127
43
1090
1142
44
1120
1172
45
1150
1202
46
1175
1227
47
1200
1252
48
1220
1272
49
1250
1302
50
1270
1322
51
1295
1347
52
1320
1372
53
1350
1402
54
1375
1427
55
1400
1452
56
1425
1477
57
1450
1502
58
1475
1527
59
1500
1552
60
1525
1577
61
1550
1602
62
1575
1627
63
1600
1652
64
1625
1677
65
1650
1702
66
1675
1727
74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103
Inside Length Li(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
1752
104
2642
2694
4167
105
2667
162
4115
1777
2719
4166
4218
1802
106
2692
164
270
6858
6910
275
6985
2744
4267
1827
107
2718
168
7037
4319
280
7100
2770
1852
108
2750
170
7152
4318
4370
290
7366
2802
7418
173
4390
4442
300
7600
1881
110
2800
7652
2852
4445
4497
320
8130
8182
2819
175
1906
111
2871
4500
4552
112
330
8380
8432
2845
177
1880
1932
2897
4572
4624
113
340
1952
8636
8688
2870
180
1900
2922
4648
1930
4700
114
350
1982
8900
8952
2896
183
2948
4700
1956
4752
115
360
2008
9144
9196
2921
185
2973
4750
1981
4802
116
370
2033
9400
9452
2950
187
3002
4825
2000
4877
118
380
2052
9650
9702
3000
190
3052
4950
2032
5002
120
400
2084
10160
10212
3050
195
3102
5052
122
415
2112
10540
10592
3100
197
5000
2060
3152
5080
2083
5132
123
434
2135
11000
11052
3125
200
3177
5131
2108
5183
124
473
2160
12000
12052
3150
202
3202
5234
125
492
2187
12500
12552
3175
204
5182
2135
3227
5207
2159
5259
126
512
2211
13000
13052
3200
205
3252
5334
2184
5386
128
550
2236
14000
14052
3250
210
3302
5461
2210
5513
129
590
2262
15000
15052
3270
215
3322
5600
2240
5652
2292
130
3300
220
3352
5691
2313
132
3350
222
5639
2261
3402
5690
2286
5742
2338
134
3400
224
3452
5715
2311
5767
2363
136
3450
225
3502
5791
2337
5843
2389
138
3500
228
3552
5842
2360
5894
2412
140
3550
230
3602
5970
2388
6022
2440
142
3600
235
3652
6045
2413
6097
2465
144
3658
238
3710
6096
2438
6148
2490
146
3700
240
3752
6302
2517
148
3750
246
6250
2465
3802
6300
2500
6352
2552
150
3810
248
3862
6350
2525
6402
2577
152
3861
250
3913
6500
2540
6552
2592
154
3912
256
3964
6553
2560
6605
2612
155
3937
258
3989
6600
2591
6652
2643
158
4000
260
4052
6700
2616
6752
2668
160
4064
264
4116
268
6800
6852
All dimentions are nominal values. : Available sizes for raw edge cogged belt CX
39
Datum Length Ld(mm)
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
Size range : 30" - 660"
Frictional Forced Power Transmission Belt
Classical V-Belts for DIN 2215/ISO4184
Datum Length Ld(mm)
E(40)
Belt Code 100
2540
2615
168
4267
4342
103
265
2616
6725
2691
6800
144
170
3650
4320
3732
4395
104
268
2650
6800
2725
6875
180
172
4575
4370
4657
4445
105
270
2675
6850
2750
6925
185
173
4700
4390
4782
4465
108
275
2750
6985
2825
7060
190
174
4825
4420
4907
4495
110
280
2800
7100
2875
7175
195
175
4950
4450
5032
4525
112
285
2850
7250
2925
7325
200
176
5080
4470
5162
4545
115
290
2925
7375
3000
7450
205
178
5200
4525
5282
4600
118
295
3000
7500
3075
7575
210
180
5300
4570
5382
4645
120
300
3048
7620
3123
7695
220
182
5600
4620
5682
4695
122
310
3100
7875
3175
7950
225
184
5715
4675
5797
4750
124
330
3150
8380
3225
8455
230
185
5850
4700
5932
4775
126
350
3200
8900
3275
8975
235
186
5970
4725
6052
4800
128
370
3250
9400
3325
9475
240
188
6100
4775
6182
4850
130
390
3300
9900
3375
9975
245
190
6225
4825
6307
4900
132
400
3350
10160
3425
10235
250
192
6350
4875
6432
4950
134
420
3400
10670
3475
10745
255
194
6475
4925
6557
5000
135
420
3425
10670
3500
10745
260
195
6600
4950
6682
5025
136
450
3450
11430
3525
11505
265
198
6730
5025
6812
5100
138
470
3500
11950
3575
12025
270
200
6850
5080
6932
5155
140
500
3550
12700
3625
12775
275
205
6985
5200
7067
5275
142
540
3600
13720
3675
13795
280
210
7100
5330
7182
5405
144
550
3658
14000
3733
14075
285
215
7250
5450
7332
5525
146
600
3700
15240
3775
15315
290
217
7375
5500
7457
5575
148
630
3750
16000
3825
16075
295
220
7500
5600
7582
5675
150
660
3810
16760
3885
16835
300
225
7620
5715
7702
5790
152
3860
3935
305
228
7750
5790
7832
5865
154
3900
3975
310
230
7875
5850
7957
5925
155
3925
4000
315
235
8000
5970
8082
6045
13802
4025
236
6000
8207
13720
3950
8125
540
156
320
6075
600
15240
15322
4000
4075
238
8250
8332
158
325
6045
6120
660
16760
16842
4060
4135
240
8380
8462
160
330
6096
6171
162
4115
4190
335
245
8500
6225
6300
164
4165
4240
340
248
8650
6300
6375
165
4200
4275
345
250
8750
6350
6425
166
4225
4300
350
255
8900
6475
6550
167
4250
4325
355
260
9000
6600
6675
360
9150
All dimentions are nominal values.
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
Belt Code
Inside Length Li(mm)
Datum Length Ld(mm)
365
9275
9357
370
9400
9482
375
9525
9607
380
9650
9732
385
9775
9857
390
9900
9982
395
10025
10107
400
10160
10242
405
10300
10382
410
10400
10482
415
10550
10632
420
10670
10752
425
10800
10882
430
10925
11007
435
11050
11132
440
11200
11282
445
11300
11382
450
11430
11512
455
11550
11632
460
11700
11782
465
11800
11882
470
11950
12032
475
12050
12132
480
12190
12272
485
12325
12407
490
12500
12582
495
12575
12657
500
12700
12782
Ⅱ Frictional Forced Power Transmission Belt
D(32) Inside Length Li(mm)
8582 8732 8832 8982 9082 9232
All dimentions are nominal values.
40
Frictional Forced Power Transmission Belt
MAXSTAR WEDGE V-Belt With its unique narrow width, this V-Belt has high power transmission capability. ● Energy-saving and compact design application ● Possible to operate with maximum speed of 40m/sec ● Excellent heat resistance and antistatic property ● Our “set-free” system for multiple belt usage is very effective to reduce dimensional differences of each belt. ● We standardize easy-to-install bussing types as our wedge pulley.
5V- 2000
Product Code Belt Type
Belt Code = Effective Belt Length (inch) x10
Ⅱ Frictional Forced Power Transmission Belt
Comparison with Standard V-Belt
Standard Belt Sizes
Product Code
:C
41
Effective Belt Length (mm)
Belt Pitch Length (mm)
Product Code
Effective Belt Length (mm)
Belt Pitch Length (mm)
Product Code
Effective Belt Length (mm)
Belt Pitch Length (mm)
Frictional Forced Power Transmission Belt
MAXSTAR WEDGE V-Belt for RMA/MPTA
Unique narrow V belt with high power transmission capability Suitable for energy-saving / compact design and can be used for high-speed operation up to 40m /second Product Code
5V-2500 Belt Type
Belt Code = Effective Belt Length (inch) x10
Cross-Sectional Dimensions
3VX
5VX
Belt length 25−95 96−270 25−95 96−270 range(inch)
a
9.9
8.6
16.6
15.7
b
8.7
9.0
13.5
13.7
a
16.0mm (5/8") 9.5mm (3/8")
3V
a 8.0mm (5/16")
3VX
5V
b
8V
5VX
13.5mm (17/32")
b
Standard Belt Sizes 3V . 3VX
Effective Belt Code Outside Length La (mm) 250 265 280 300 315 335 355 375 400 425 450 475 500 530 560 600 630 670 710 750 800 850 900 950
1000 1060 1120 1180
1250 1320 1400
635 673 711
762 800 851 902 953
1016 1080 1143
1207 1270 1346 1422 1524 1600 1702 1803 1905 2032 2159 2286 2413 2540 2692 2845 2997 3175 3353 3556
5V . 5VX
3V
3VX
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Effective Belt Code Outside Length La (mm) 500 530 560 600 630 670 710 750 800 850 900 950
1000 1060 1120 1180
1250 1320 1400 1500 1600 1700 1800 1900 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550
1270 1346 1422 1524 1600 1702 1803 1905 2032 2159 2286 2413 2540 2692 2845 2997 3175 3353 3556 3810 4064 4318 4572 4826 5080 5385 5690 5994 6350 6731 7112
7620 8001 8509 9017
23.0mm (7/8")
Ⅱ Frictional Forced Power Transmission Belt
Belt Type
25.5mm (1")
8V
5V
5VX
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Effective Belt Code Outside Length La (mm) 1000
2540
1120
2845
1060 1180
1250 1320 1400 1500 1600 1700 1800 1900 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750
2692 2997 3175 3353 3556 3810 4064 4318 4572 4826 5080 5385 5690 5994 6350 6731 7112
7620 8001 8509 9017 9525
4000
10160
4500
11430
4250 4750 5000 5600 6000
10795 12065 12700 14224 15240
8V ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○
All dimentions are nominal values.
42
Frictional Forced Power Transmission Belt
Narrow V-Belt for DIN 7753/ISO4184 Suitable for energy-saving / compact design Reduces maintenance costs
SPZ-1000
Product Code
Belt Type
Belt Code (mm)
∗ Belt code = belt effective length (mm)
Cross-Sectional Dimensions 9.7mm
SPZ SPZX
SPA SPAX
8.0mm
Ⅱ Frictional Forced Power Transmission Belt
38°
10.0mm
SPB SPBX
13.0mm
SPC SPCX
40°
38°
18.0mm
40°
Standard Belt Sizes SPZ (SPZX)
SPA (SPAX)
Pitch Length Pitch Length Pitch Length Pitch Length LW (mm) LW (mm) LW (mm) LW (mm) 487 512 562 587 612 630 637 650 655 662 665 670 687 690 710 722 737 750 760 762 772 787 800 812 825 835 837 850 862 875 885 887 900 912 925 937 940 950 962 987 1000 1005 1010 1012 1024 1037 1047 1060 1077 1080 1087 1100 1110
1112 1120 1137 1140 1162 1180 1187 1200 1202 1212 1222 1237 1250 1262 1270 1282 1287 1300 1312 1320 1337 1340 1347 1362 1387 1400 1412 1420 1437 1462 1487 1500 1512 1520 1537 1560 1562 1587 1600 1612 1637 1662 1687 1700 1737 1762 1787 1800 1812 1837 1862 1887 1900
1937 1987 2000 2030 2037 2050 2060 2082 2087 2120 2137 2150 2160 2187 2200 2240 2262 2280 2287 2300 2337 2360 2387 2400 2410 2437 2450 2487 2500 2540 2580 2600 2637 2650 2670 2687 2690 2700 2712 2720 2737 2760 2800 2840 2900 3000 3050 3070 3150 3170 3200 3250 3350
All dimentions are nominal values.
43
22.0mm
16.3mm
12.7mm
3450 3550 3660 3750 4000 4500
SPB (SPBX)
Pitch Length Pitch Length Pitch Length LW (mm) LW (mm) LW (mm) 732 735 742 757 760 782 800 807 832 850 857 860 882 885 900 907 932 950 957 967 982 1000 1007 1032 1057 1060 1082 1090 1107 1120 1132 1157 1180 1182 1200 1207 1210 1232 1235 1250 1257 1272 1282 1295 1300 1307 1320 1332 1357 1367 1382 1385 1400
: Available sizes for raw edge cogged belt SPZX, SPAX, SPBX, SPCX
1407 1410 1425 1432 1457 1482 1485 1500 1507 1532 1557 1582 1600 1607 1632 1657 1682 1700 1707 1732 1757 1782 1785 1800 1807 1832 1837 1857 1882 1900 1907 1932 1957 1982 2000 2032 2057 2082 2100 2120 2132 2157 2182 2200 2207 2232 2240 2260 2282 2300 2307 2330 2332
2360 2373 2382 2407 2410 2432 2482 2500 2532 2550 2568 2582 2600 2607 2632 2650 2682 2732 2773 2782 2800 2832 2847 2850 2882 2900 2932 2962 2982 3000 3032 3082 3132 3150 3182 3282 3350 3382 3482 3500 3550 3650 3750 3870 4000 4120 4250 4300 4500 4600 4750 4865 5000
SPC (SPCX)
Pitch Length Pitch Length Pitch Length LW (mm) LW (mm) LW (mm) 1250 1260 1320 1340 1400 1410 1500 1510 1590 1600 1690 1700 1750 1800 1850 1900 1950 2000 2020 2030 2060 2120 2131 2137 2150 2180 2200 2240 2264 2280 2300 2310 2320 2330 2360 2390 2391 2410 2425 2430 2450 2473 2500 2518 2522 2530 2550 2575 2580 2600 2640 2650 2670
2680 2700 2720 2750 2800 2820 2840 2900 2990 3000 3070 3150 3170 3175 3200 3238 3250 3280 3328 3340 3350 3400 3412 3425 3450 3500 3550 3650 3675 3700 3750 3770 3800 3850 3870 3875 4000 4060 4100 4120 4250 4260 4296 4310 4318 4370 4500 4560 4600 4620 4720 4750 4820
4870 5000 5070 5300 5380 5500 5600 5680 5800 5990 6000 6300 6340 6700 6720
up to 10000
Pitch Length Pitch Length LW (mm) LW (mm) 2000 2120 2240 2280 2335 2360 2400 2413 2425 2500 2550 2580 2600 2650 2700 2720 2750 2770 2800 2840 2900 2950 3000 3050 3100 3150 3200 3220 3320 3350 3375 3420 3430 3450 3500 3520 3550 3600 3620 3670 3700 3750 3770 3800 3810 3970 4000 4050 4100 4200 4250 4300 4350
4380 4400 4420 4445 4450 4500 4530 4650 4720 4750 4850 4900 4970 5000 5030 5070 5200 5300 5330 5400 5500 5600 5700 6000 6200 6300 6480 6500 6700
up to 12500
Frictional Forced Power Transmission Belt
SUPER VS® Belt (Variable Speed Belt) Changes in speed can be accurately, smoothly and quietly transmitted from low to high speed. High precision and transmission efficiency as well as excellent durability. Almost no elongation. Excellent oil, heat and lateral pressure resistance. Specially for high performance and high quality transmission systems.
Cross-Sectional Diagram
b
θ
a(mm)
b(mm)
30 37 12 16 22 10 12 16 20 20
10 12 5 6 8 5 6 8 10 12
SUPER VS 16-8-700
θ° 22 22 22 22 22 22 22 22 22 22
Belt Outer Length (mm) Belt Thickness (mm) Belt Top Width (mm)
Belt Type
ISO Code
RMA Code
SUPER VS 22-8-700 = 14 22 V 270
Belt Pitch Length (inch×10) Variable Speed Belt Pulley Groove Angle (22°) Belt Top Width (14×1/16 inches)
Belt Type Belt Top Width (mm)
Belt Outer Length (mm) Belt Thickness (mm)
Standard Belt Sizes ISO Code
RMA Code
ISO Code
RMA Code
ISO Code*1
ISO Code*2
ISO Code*3
30-10-668 1922V256
ISO Code
RMA Code
37-12-855
2322V329
22-8-615
1422V235
10-5-450
16-8-600
20-10-1600
30-10-733 1922V282
37-12-995 2322V384
22-8-648
1422V250
10-5-500
16-8-650
20-10-1700
30-10-723 1922V277
37-12-945 2322V364
30-10-773 1922V298
37-12-1030 2322V396
30-10-813 1922V313
37-12-1120 2322V434
30-10-783 1922V302 30-10-813 1922V314 30-10-838 1922V321
37-12-1090 2322V421 37-12-1140 2322V441 37-12-1190 2322V461
30-10-863 1922V332
37-12-1240 2322V481
30-10-943 1922V363
37-12-1345 2322V521
30-10-878 1922V338 30-10-988 1922V381 30-10-998 1922V386
30-10-1043 1922V403 30-10-1078 1922V417 30-10-1098 1922V426 30-10-1143 1922V443 30-10-1173 1922V454 30-10-1188 1922V460
30-10-1248 1922V484 30-10-1353 1922V526 30-10-1398 1922V544 30-10-1553 1922V604 30-10-1618 1922V630 30-10-1663 1922V646 30-10-1708 1922V666 30-10-1758 1922V686 30-10-1813 1922V706 30-10-1848 1922V721 30-10-1863 1922V726 30-10-1928 1922V751 30-10-1938 1922V756 30-10-2068 1922V806
22-8-625
1422V240
22-8-700
1422V270
22-8-755 22-8-780 22-8-855 22-8-880 22-8-930
1422V290 1422V300 1422V330 1422V340 1422V360
37-12-1255 2322V486
22-8-1030 1422V400
37-12-1395 2322V541
22-8-1135 1422V440
37-12-1545 2322V601
22-8-1085 1422V420 22-8-1185 1422V460
37-12-1595 2322V621
22-8-1200 1422V466
37-12-1750 2322V681
22-8-1235 1422V480
37-12-1700 2322V661 37-12-1800 2322V701 37-12-1850 2322V721 37-12-2055 2322V801 37-12-2120 2322V826 37-12-2170 2322V846 37-12-2270 2322V886
22-8-1210 1422V470 22-8-1390 1422V540 22-8-1540 1422V600 22-8-1690 1422V660 22-8-1845 1422V720 22-8-1995 1422V780
37-12-2360 2322V921 12-5-451
7.522V173
12-5-551
7.522V212
12-5-501 12-5-571 16-6-513 16-6-548 16-6-573 16-6-578 16-6-628
7.522V193 7.522V220 1022V196 1022V210 1022V220 1022V223 1022V247
30-10-2168 1922V846
10-5-475 10-5-525 10-5-550 10-5-575 10-5-600 10-5-625 10-5-650 10-5-675 10-5-700 10-5-725 10-5-750 12-6-500 12-6-525
16-8-625 16-8-675 16-8-700 16-8-725 16-8-750 16-8-775 16-8-800 16-8-825 16-8-850 16-8-875 16-8-900 16-8-925
20-10-1650 20-10-1750 20-10-1800 20-10-1850 20-10-1900 20-10-1950 20-10-2000 20-12-750 20-12-800 20-12-850 20-12-900 20-12-950
16-8-950
20-12-1000
12-6-575
16-8-1000
20-12-1100
12-6-625
20-10-800
20-12-1200
20-10-900
20-12-1300
12-6-550 12-6-600 12-6-650 12-6-675 12-6-700
16-8-975
20-10-750 20-10-850 20-10-950
12-6-725
20-10-1000
12-6-775
20-10-1100
12-6-750 12-6-800
20-10-1050 20-10-1150
12-6-825
20-10-1200
12-6-875
20-10-1300
12-6-850 12-6-900 12-6-925 12-6-950 12-6-975
12-6-1000
20-10-1250 20-10-1350 20-10-1400 20-10-1450 20-10-1500 20-10-1550
Ⅱ Frictional Forced Power Transmission Belt
a
Product Code
20-12-1050 20-12-1150
20-12-1250 20-12-1350 20-12-1400 20-12-1450 20-12-1500 20-12-1550 20-12-1600 20-12-1650 20-12-1700 20-12-1750 20-12-1800 20-12-1850 20-12-1900 20-12-1950 20-12-2000
Note 1) *1, *2, *3 are only in ISO Code. Note 2) Please contact us for sizes beyond the standard size.
44
Frictional Forced Power Transmission Belt
MAXSTAR WEDGE Bushing Pulley For all wedge pulleys, we adopt a “bushing system” for easy attachment and removal from the shaft with one spanner. ● ● ● ●
Long shaft life as it does not damage the shaft and shaft hole No need for additional processing of the shaft hole Easy centering and smooth positional change of rotating body such as the pulley Possible weight reduction of pulley as small bore width can be applied
450-5V-3-R1
Bushing Pulley Product Code
No. of Grooves
Pulley Diameter
Bushing Type
Belt Type
Application chart for MB Bushing on MAXSTAR WEDGE Pulley Belt Type
Belt Type No.of Grooves
Standard Pulley Diameter/Diameter Code(mm)
Belt Type No.of Grooves
Standard Pulley Diameter/Diameter Code(mm)
No.of Grooves
Ⅱ Frictional Forced Power Transmission Belt
Standard Pulley Diameter/Diameter Code(mm)
● How to mount onto the shaft ❶
Place the bushing in the pulley and loosen bolts by hand
❷
❸
Attach the bushing pulley onto the shaft (it should fit smoothly.)
Fasten tight with tightening bolts and fitting is completed.
● How to detach from the shaft
45
Mounting bushing pulley is easy even from the opposite side.
1 2
Fasten bolts evenly Wear protective gear such as gloves while mounting and removing the pulley. Also, before starting any work, switch off the power and ensure that machine is completely stopped.
● Bolt Tightening Torque
❶
❷
❸
Remove tightening bolts
Screw the bolts into the taps for flange removal
Remove the bushing pulley from the shaft
Frictional Forced Power Transmission Belt
Number of Required Belts and Pulley Width 3V・3VX 5V・5VX 8V
Ⅱ Frictional Forced Power Transmission Belt
MB Bushing Size Table
46
Frictional Forced Power Transmission Belt
e-Power® V-Belt
This type has enhanced flexibility over standard V-Belts. Due to this flexibility, it reduces the energy loss from bending stress and thus is more efficient and energy-saving. ● It saves electricity. ● It is compatible with exisiting pulley designs. ● Compact design application. ● It has longer operating life. ● You can choose from 2 types depending on intended use : Raw Edge Cogged type and Wrapped Notched type
Wrapped Notched Type
Ⅱ Frictional Forced Power Transmission Belt
Raw Edge Cogged Type
For the cogged type, to enhance flexibility, wave shape dents are added on the bottom of the Raw Edge Belt.
For the Notched type, to enhance flexibility, notches are added across the bottom of the Wrapped V-Belt.
Product Code
A-50
AX-50 Belt Type
Belt Code (inch)
● Belt code indicates belt effective pitch length in inches
Belt Type
Belt Code (inch)
● Belt code indicates belt effective pitch length in inches
Cross-Sectional Dimensions
Above are nominal values.
Standard Belt Sizes
AX BX CX
47
Nominal Length 20〜180 25〜270 40〜270
A B C
Nominal Length 30〜200 30〜200 45〜200
Frictional Forced Power Transmission Belt
RIBSTAR Belt G (Rubber V-Ribbed Belt) This belt combines the properties of the V-Belt’s high power transmission capability and the Flat Belt flexibility. ● ● ● ● ●
High-efficiency operation at high speed It can be used on a small diameter pulley because of its enhanced flexibility. Excellent heat resistance and abrasion resistance Compact design application. Little belt vibration.
(Example)
Product Code
320 J 5
For PK type, the metric system is used
5 PK 1500
No. of Ribs Belt Type
No. of Ribs Belt Type
Belt Effective Length (mm)
Belt Effective Length (inch) x10 ∗ Effective Length : The effective outer perimeter
Ⅱ Frictional Forced Power Transmission Belt
Cross-Sectional Diagram
N:No.of Ribs
Standard Sizes for Industrial RIBSTAR Belt J Effective Product Code Length (mm)
180J 190J 200J 210J 220J 235J 240J 245J 250J 260J 270J 280J 285J 290J 300J 310J 315J 320J 330J 340J 345J 350J 360J 370J 375J 380J 390J 400J 410J 415J 420J 425J 430J 435J
457 483 508 533 559 597 610 622 635 660 686 711 724 737 762 787 800 813 838 864 876 889 914 940 953 965 991 1,016 1,041 1,054 1,067 1,080 1,092 1,105
PK Effective Product Code Length (mm)
440J 445J 450J 460J 470J 480J 490J 500J 510J 520J 525J 530J 540J 550J 560J 580J 590J 600J 610J 620J 630J 650J 660J 665J 690J 700J 730J 750J 760J 770J 780J 820J 890J 900J
1,118 1,130 1,143 1,168 1,194 1,219 1,245 1,270 1,295 1,321 1,334 1,346 1,372 1,397 1,422 1,473 1,499 1,524 1,549 1,575 1,600 1,651 1,675 1,689 1,753 1,778 1,854 1,905 1,930 1,956 1,981 2,083 2,260 2,286
Effective Product Code Length (mm)
PK600 PK615 PK630 PK650 PK690 PK710 PK730 PK750 PK775 PK800 PK825 PK850 PK875 PK900 PK925 PK950 PK975 PK1000 PK1030 PK1060 PK1090 PK1120 PK1150 PK1180 PK1220
600 615 630 650 690 710 730 750 775 800 825 850 875 900 925 950 975 1,000 1,030 1,060 1,090 1,120 1,150 1,180 1,220
L
Effective Product Code Length (mm)
PK1250 PK1280 PK1320 PK1360 PK1400 PK1450 PK1500 PK1550 PK1600 PK1650 PK1700 PK1750 PK1800 PK1850 PK1900 PK1950 PK2000 PK2120 PK2240 PK2360 PK2500 PK2650 PK2800 PK3000
1,250 1,280 1,320 1,360 1,400 1,450 1,500 1,550 1,600 1,650 1,700 1,750 1,800 1,850 1,900 1,950 2,000 2,120 2,240 2,360 2,500 2,650 2,800 3,000
● Many more sizes are available for PK type. Please contact us for sizes beyond the standard size.
Effective Product Code Length (mm)
345L 350L 355L 360L 370L 375L 380L 385L 390L 395L 400L 405L 410L 415L 420L 425L 430L 450L 460L 470L 480L 500L 510L 520L 540L 550L 560L 565L 570L
876 889 902 914 940 953 965 978 991 1,003 1,016 1,029 1,041 1,054 1,067 1,080 1,092 1,143 1,168 1,194 1,219 1,270 1,295 1,321 1,372 1,397 1,422 1,435 1,448
Effective Product Code Length (mm)
580L 590L 600L 615L 635L 650L 655L 675L 680L 690L 695L 725L 750L 765L 770L 780L 815L 835L 845L 865L 880L 915L 930L 975L 990L 1065L 1120L 1150L
1,473 1,499 1,524 1,562 1,613 1,651 1,664 1,715 1,727 1,753 1,765 1,842 1,905 1,943 1,956 1,981 2,070 2,121 2,146 2,197 2,235 2,324 2,362 2,477 2,515 2,705 2,845 2,921
48
Frictional Forced Power Transmission Belt
RIBSTAR Belt U (Polyurethane V-Ribbed Belt) This polyurethane belt combines the features of both V-Belt and Flat Belt. ● Usable on small diameter pulleys (minimum φ 20mm) because of its enhanced flexibility with nylon cord. ● Excellent flex fatigue resistance. ● Smooth revolution with little vibration. ● It withstands high-speed operation ● Excellent abrasion, oil and ozone resistance
Product Code
(Example)
180 - JBT - 4 No. of Ribs (4 ribs) Belt Type Belt Length : Pitch Length (inch) x 10
Dimensions Sectional Size Rib Pitch
Rib Angle
Ⅱ Frictional Forced Power Transmission Belt
Rib Height
Rib Bottom Thickness Total Thickness Belt Width
Standard Belt Sizes for JBT Type Pitch Length(mm)
Form and Structure of Pulley Groove
Groove Dimensions for RIBSTAR Pulley
W
49
Pitch Length(mm)
Pitch Length(mm)
Pitch Length(mm)
Frictional Forced Power Transmission Belt
RIBSTAR Pulley Except for a few sizes, RIBSTAR pulleys adopt the “bushing system” for easy attachment and removal as well as positioning of pulley onto the shaft.
Pulley Product Code
(Example)
PK - 160 - 5 - 1210
Groove Form Diameter Code : Effective Outer Diameter (mm)
PK
e
rt
rb max
α(°)
f
3.56±0.05
0.35±0.08
0.5
40±0.5
5±0.5
Hg Reference Value
Ⅱ Frictional Forced Power Transmission Belt
PK
Bore Outer Diameter
Groove Form Belt Type
Effective Outer Diameter
Pitch Diameter
Pulley Groove Dimensions
Bushing Product Code No. of Grooves
Pulley Sizes and Relevant Bushing Product Code
(Outer Diameter)
Bushing Product Code
Bushing Product Code
Bushing Product Code
Bushing Product Code
Bushing Product Code
Bushing Product Code
Up to 30m/sec of pulley rim speed is enabled. Please do not exceed 30m/sec.
50
Frictional Forced Power Transmission Belt
FLEXSTAR® Belt Because of its large power transmission capacity, compact design application and cost reduction are possible. ● Smooth and quiet operation with little vibration. Withstands operation at a maximum speed of 60m/sec ● Excellent heat resistance, oil resistance and antistatic properties ● Almost no need for re-tension since the belt doesn’ t stretch much
Ⅱ Frictional Forced Power Transmission Belt
Dimensions & Product Code
Belt Length(mm) Belt Type Belt Width(mm)
Standard Belt Sizes
Applications
51
Frictional Forced Power Transmission Belt
SUPER FLEXSTAR® Belt SUPER FLEXSTAR® is a high tension flat belt developed for press application whereby a belt and a pulley sandwich and dewater objects. ● High belt tension ● Besides press application, it also suits applications like conveyance.
Product Code
(Example)
50 FW 3150 Belt Length (mm) Belt Type Belt Width (mm)
Cross-Sectional Diagram
Top cushion: Chloroprene rubber Cord protection material : Nylon Ⅱ Frictional Forced Power Transmission Belt
a
Adhesion rubber : Chloroprene rubber
b
Cord : Aramid Cord protection material : Nylon Bottom cushion : Chloroprene rubber
Belt Types a b Standard Width Belt Thickness (mm) (mm)
Standard Size Minimum Pulley (mm) Diameter(mm)
Belt Edge Finishing
Tensile Strength (kN/cm)
52
Frictional Forced Power Transmission Belt
FLEXSTAR® Belt J FLEXSTAR® Belt J is a thin, flexible and seamless high-precision flat belt, developed specially for conveyance of tickets, plastic cards, paper money, coins and so on. ● ● ● ●
Good running stability Reliable conveyance Excellent abrasion resistance and adaptability Maintenance-free
Product Code
(Example)
10 - JLB - 500 - 1.0
Belt Width (mm)
Product Lineup
Belt Thickness (mm) Belt Type
Belt Length (mm)
Ⅱ Frictional Forced Power Transmission Belt
W
Polished Polished
eg)
eg)
eg)
53
T
Frictional Forced Power Transmission Belt
t s e B
! r e l sel
POLYMAX® Belt This is a wide-angle belt with an angle of approx. 60° . ● ● ● ● ●
High-speed power transmission with low vibration Compact design and cost efficient Maintenance-free and stretch resistance Excellent weather resistance MATCHED SET is available for both single and MULTI belts. Ask for MATCHED SET to improve the performance of multi set system.
Cross-Sectional Sizes & Product Code Multi-POLYMAX® Belt
Dimensions Dimensions
Product Code
Effective Length(mm) Belt Type
Product Code
Effective Length(mm)
Belt Type
No.of Ribs
Ⅱ Frictional Forced Power Transmission Belt
POLYMAX® Belt
Standard Belt Sizes
54
Frictional Forced Power Transmission Belt
MB Belt (Polyurethane V-Belt) A small transparent belt for light-duty power transmission
● ● ● ●
With its high flexibility, it can be used with a small diameter pulley. Excellent abrasion resistance and thus clean operation Small slippage operation Excellent oil resistance
Cross-Sectional Dimensions & Product Code
Ⅱ Frictional Forced Power Transmission Belt
Top Width a (mm)
Belt Length (Outer Perimeter in mm) Belt Type
Dimensions
Standard Belt Sizes
Belt Length
Form & Dimensions of Pulley Grooves
Min. Width(W) Min. Height(h)
30mm and above
Minimum Pulley Diameter
55
Wo Reference (min)
θ
R
5.4
4.5
36°
0.8
5.6
5.4
4.5
38°
0.8
5.6
Frictional Forced Power Transmission Belt
STARROPE®/ SUPER STARROPE®/ PRENE V-ROPE / PRENE HEXAGONAL-ROPE This is an open-end polyurethane belt. ● ● ●
It is easily applicable in complex power transmission system such as multiaxial and divertible power transmission. Thermal weld: Endless belt length possible. Excellent abrasion and oil resistance
PRENE V-ROPE
PRENE HEXAGONAL ROPE
STARROPE®/ SUPER STARROPE® Dimensions Belt Code
2φ
3φ
4φ
5φ
6φ
7φ
8φ
9φ
10φ
12φ
15φ
d (mm)
Ⅱ Frictional Forced Power Transmission Belt
d
Length of 1 Roll(m)
PRENE V-ROPE Cross-Sectional Dimensions a (mm) b (mm) θ(
°)
Lengh of 1 Roll (m)
PRENE HEXAGONAL-ROPE Cross-Sectional Dimensions a (mm) b (mm) θ(
°)
Lengh of 1 Roll (m)
Pulley for STARROPE®/ SUPER STARROPE®
Pulley for PRENE V-ROPE / PRENE HEXAGONAL-ROPE PRENE V-ROPE
PRENE HEXAGONAL-ROPE
b (mm) h (mm)
Pulley Dimensions for STARROPE®/ SUPER STARROPE® Belt Code
2φ
3φ
4φ
5φ
6φ
7φ
8φ
9φ
10φ
12φ
15φ
a (mm) w (mm) h (mm)
56
Frictional Forced Power Transmission Belt
Flat Belt This is a high-quality flat belt made from premium fabric and synthetic rubber. There is very little belt shrinkage. Excellent flex resistance Heat, water and oil resistance
● For textile and agricultural machines
Product Lineup
Ⅱ Frictional Forced Power Transmission Belt
JIS 1st Class Equivalent
JIS 2nd Class Equivalent
Round Edge Type special PORT®
Round Edge Type PORT® Cut Edge Type PIONEER®
Flat Belt
Round Edge Type HARBOUR® JIS 3rd Class Equivalent Cut Edge Type ECHO®
Side / core fabric : white Tape color : light green Mark color : brown
Side / core fabric : yellow-brown Tape color : brown Mark color : orange
Side / core fabric : yellow-brown Edge adhesive : red Mark color : brown
Side / core fabric : red-brown Tape color : green Mark color : green
Side / core fabric : red-brown Edge adhesive : green Mark color : green
Applicable for lifter with its stretch resistant. For LA, LB, LC types, it is possible to add V rails.
DRY FLEX® For lifter Others Canvas surface specification
Covered by canvas, this belt has a nonsticky surface. Single sided belt is manufactured only in cut edge type whereas double sided belt can be supplied in both cut and round edge type
Standard Sizes for Round Edge Products No. of Plies Belt Width
20mm 25mm 30mm 38mm 50mm 63mm 75mm 90mm 100mm 125mm 150mm 175mm 200mm 250mm 300mm 350mm 400mm 500mm 600mm
2P
H・P H・P H・P H・P H H H H H
3P H・P H・P H・P H・P H・P H・P H H H H H H H H H
4P
5P
H H・P H・P H・P H・P H・P H H
P H・P P
● H: HARBOUR® P: PORT® ● Made-to-order for cut edge type (PIONEER®, ECHO®), DRY FLEX® and Canvas surface types. ● A lot for made-to-order items is 100m.
57
6P
H・P P
7P
8P
P P
P P P
ⅢD irect Connected Power Transmission Chemi-Chan® (High Performance Miniature Coupling)......... P59 HYPERFLEX® Coupling..................................... P60 TSCHAN® Coupling NOR-MEX®................. P61, 62 TSCHAN® Coupling S........................................ P63
Direct Connected Power Transmission
“Chemi-Chan®” (High Performance Miniture Coupling) “Chemi-Chan®”, high-performance miniature coupling, launched on the market for high precision rotary transmission. ● ● ● ●
Excellent vibration absorption Quiet operation Accurate positioning and transmission of rotating power High durability which withstands harsh start and stop of power shaft.
Coupling Product Code (Example)
HAS - 22 - 8x6 - C(or F)
Coupling Code Coupling Outer Diameter (φ22)
Ⅲ Direct Connected Power Transmission
Standard Sizes
Peak maximum torque should be twice less than rated torque. Currently, we use a screw method to mount it onto the shaft. We use a mass of coupling with a drilled hole as a standard product mass.
Applications
59
C: Clamp Type F: With Flange (opaque ring) Duplex Shaft Diameter (large diameter x small diameter)
Direct Connected Power Transmission
HYPERFLEX® Coupling (MT . MH) Two types are available –MT type and MH type MT type is a compression stress type, which is compact design with large transmission torque. MH type is a model uses shearing stress of elastic rubber.
MT Type ● Applicable for all kinds of applications. ● Compact size with large transmission torque. ● Easy-to-install and maintenance-free ● The polyurethane elastic body, which features excellent oil and abrasion resistance. MH Type ● High flexibility and excellent shock absorption ● Applicable as a torque limiter
MT - G - 85
Coupling Product Code (Example) Type
Elastic Body: Rubber
Size
Standard Sizes for MT Type
Ⅲ Direct Connected Power Transmission
Polyurethane(U)
Standard Sizes for MH Type
Applications
60
Direct Connected Power Transmission
TSCHAN® Coupling NOR-MEX® It consists of a flange and a unique shape elastic body, which withstands large transmission torque. 20 types available and 301 total combinations. ● ● ● ● ●
Energy-saving since it transmits large torque with small body. Suitable for machineries with high-speed revolution Elastic body can be easily attached and removed without moving machinery. Compact design application, quiet operation and also maintenance-free. Wide variety of sizes and types.
Coupling Product Code (Example)
Nor - Mex G 148 Size Model G Type
Standard Sizes
Regular Max. Max. Outer Total Torque Torque Revolution Diameter Length Speed TN Mmax mm mm rpm N.m N.m
Code
Max. Regular Max. Torque Torque Revolution Outer TN Mmax Speed Diameter mm N.m N.m rpm
Total Length mm
Code
Regular Max. Torque Torque TN Mmax N.m N.m
Max. Revolution Outer Total Diameter Length Speed mm mm rpm
Code
Regular Max. Max. Torque Torque Revolution Outer Total TN Mmax Speed Diameter Length mm mm N.m N.m rpm
Code
Regular Max. Max. Outer Torque Torque Revolution TN Mmax Speed Diameter mm . . rpm Nm Nm
Total Length mm
Code
Regular Max. Torque Torque TN Mmax N.m N.m
Max. Outer Total Revolution Diameter Length Speed mm mm rpm
Ⅲ Direct Connected Power Transmission
Code
(LE330-430) (LE370-480) (LE415-575)
61
Direct Connected Power Transmission
TSCHAN® Coupling NOR-MEX® Series
Ⅲ Direct Connected Power Transmission
Applications
62
Direct Connected Power Transmission
TSCHAN® Coupling S ● ● ● ● ●
Small size with large torque Light, compact and easy to install and remove Suitable for machinery with high revolution speed Quiet operation and longer operating life Maintenance-free
Applications ● ● ● ● ●
Crane Hot run table NC mill Machining center Food manufacturing machinery
Coupling Product Code (Example)
● ● ● ● ●
Industrial sewing machine Centrifuge Generator Conveyor drive Screw compressor
● Water pump ● Two-way blower
S 200 St - U Elastic Body: Polyurethane Flange Material
Model Size
Standard Sizes for TSCHAN® Coupling S
Outer Total Diameter Length mm mm
Outer Diameter Total Length ST ZA mm
Outer Diameter Total Length VS ZA mm
105
105
105
126
126
126
Outer Total Diameter Length mm mm
(min−1)
Ⅲ Direct Connected Power Transmission
Maximum Torque Mmax(N.m) Elastic Body
Combination Examples of Standard Types S Type
ST-TSN
SX Type
ST-TSN
ZA-TSN
SV Type
ST-TSN
ZA-TSN
SZ Type
VS-TSN
ZA-TSN
ZA-TSN
✽ TSCHAN is a registered trademark of TSCHAN Corporation. ®
®
Combination Examples S-LSt Type
SD-5 Type
SDD-5 Type
Longer one of S type
One side of flange and boss are detachable by bolts
Both side of flange and boss are detachable by bolts
BH Type
SDDL-5-BS Type
S type with brake drum
SDD type with brake disc
BHDD Type For high torque. Erastic body replaceable without moving machine.
63
S-BT Type
For high torque. One side of flange and boss is detachable by bolts
ⅣO ther Related Products SLEEVE ROLL (Polyurethane molded product)���������� P65 STARLOCK® (Shaft Fastener)��������������������������������� P66, 67
Other Related Products
SLEEVE ROLL
(Polyurethane molded product)
It is a new press-in type roller coating and shock-absorption material, which is formed by jointing soft and hard urethane in two layers. ● It is easily put onto iron cores or rollers by pressing. Also, it has a strong grip. ● It is very economical as it doesn’ t require roll replacement caused by adhesive agents as well as thermal lining onto iron cores or rollers. ● Excellent abrasion and oil resistance compared to plastic and rubber made rolls. Also, it has excellent water and weather resistance. ● Two-layer structure of hard and soft urethane reduces shock and noise during back conveyance. Moreover, a clean conveyance is possible as the roller rust does not contaminate transporting items.
Applications
Product Code
(Example)
SR - 50 - 47
Protection of transported items, surface rust prevention, water
Sleeve Roll
Width
Inner Diameter
washing operation line
Standard Sizes Hardness( ) Outer Layer+Inner Layer
Ⅳ Other Related Products
Applicable Shaft Diameter(mm)
(Outer)(Inner) 86° 80°
(Surface Cog Type)
How to put on
Jig
Shaft
65
Sleeve Roll
PVC Pipe
Sleeve Roll Shaft
Stock Availability
Other Related Products
STARLOCK® STARLOCK® is a lock system that offers simple yet secure and strong attachment of shaft and boss without troublesome key groove processing. Thus, it also saves calculation and control processes required for shrink and force fit methods. With this system, shaft and boss are easily put together by high surface pressure. ● ● ● ●
Absolutely no need for shaft hole and key groove processing Non-backlash Any positioning on the shaft is possible Easy attachment and detachment
STL-20S
STL-21S STL - 20S - 20 - 47
STL - 21S - 19 - 47
Outer Diameter Inner Diameter (Shaft Diameter) Model Number Starlock
Performance & Sizes
Outer Diameter Inner Diameter (Shaft Diameter) Model Number Starlock
Performance & Sizes Product Code
Ⅳ Other Related Products
Product Code
Outer ring
Standard Size Range : d = φ5∼φ100 Transmission torque and thrust shown above are maximum values.
Standard Size Range : d = φ20∼φ280 Transmission torque and thrust shown above are maximum values.
66
Other Related Products
STARLOCK®
STL-21F
STL-30R STL - 21F - 19 - 47 Outer ring
STL - 30R - 20 - 25
Outer Diameter Inner Diameter (Shaft Diameter) Model Number Starlock
Outer Diameter Inner Diameter (Shaft Diameter) Model Number Starlock
Inner ring
30F Performance & Sizes Product Code
Performance & Sizes Product Code
STL - 30F - 25 - 30
Outer Diameter Inner Diameter (Shaft Diameter) Model Number Starlock
Pressurized Flange
Ⅳ Other Related Products
Product Code
Standard Size Range : d = φ5∼φ100 Transmission torque and thrust shown above are maximum values.
67
Ⅴ T roubleshooting for Power Transmission Products For Timing Belt.................................................. P69 For V-Belt........................................................... P70
Troubleshooting for Power Transmission Products
Failure during machinery operation is a serious matter. To resolve belt failure, determine cause of failure before replacing with a new belt. This will maximize the capability of the belt and extend its life. The following is an introduction to belt failure main causes. Please check the items in this table when failure occurs.
■ 1. For Timing Belt Occurrence
Abnormal side wear
Cause ● Poor alignment
Adjust the alignment
● Base not adequately fixed
Strengthen the base fixture
● Bending of the pulley flange
Correct flange bending
Abnormal wear at tooth surface ● Overload where pressure is being exerted ● Overstretched belt ● Overstretched belt
Abnormal wear at contact point ● Defective pulley tooth form of pulley area
Tooth damage
Measure
Amend the design and use better grade Adjust the initial tension of the belt Adjust the initial tension of the belt Replace using special attention on the R of the pulley tooth end
● Pulley diameter too small
Change the system design
● 6 teeth or less for T.I.M
Increase T.I.M or change the system design
● Exertion of shock load
Ensure that shock is not exerted on the belt or increase the belt width
Breaking of tensile body
● Overload
Change the system design
● Drop in elasticity or corrosion of
Check the storage condition and transport
tensile body ● Exertion of shock load
condition of the belt Ensure that shock is not exerted on the belt or increase the belt width
● Usage under -30℃
Raise the surrounding temperature
● Pulley diameter too small
Use a bigger diameter pulley
Thermal ageing of rubber/ polyurethane
● Temperature of 80℃ and above at the
Reduce the surrounding temperature
Swelling of the rubber
● Oil contamination
Use polyurethane or oil resistant rubber belt
● Overload
Change the system design
● Overstretched belt
Adjust the initial tension of the belt
● Unsuitable pulley material (too soft)
Add surface treatment or change the material
Crack at the back side
Abnormal wear at pulley tooth
rubber/ polyurethane
of pulley
Ⅴ Troubleshooting
Wear at pulley edge
● Pulley life
Change to a new pulley
● Overstretched belt
Change to new pulley and belt while
(Tensile body can be seen underneath the belt)
Abnormal operation sounds
loosening the tension
● Poor alignment
Adjust the alignment
● Overstretched belt
Adjust the initial tension of the belt
● Overload
Change the system design
● Pulley diameter too small
Change the system design
● Defective pulley tooth form
Ensure that pulley tooth is accordance to standard dimensions
Belt looks elongated
69
● Short inter-shaft distance
Adjust to the correct inter-shaft distance
● Loosening of the base
Strengthen the base fixture
■ 2. For V-Belt Occurrence
Slippage
Cause
Measure
● Loose belt tension
Apply appropriate tension
● Overload
Increase belt width or increase the number of belt in use.
● Minimum contact angle
Widen belt width or install an idler pulley of the appropriate diameter
● Oil or water contamination
Completely remove the oil and water and prevent further contamination by placing the belt cover
● Load variation/ large shock
While there are design elements to be altered, the
● Use the belt above its transmission capacity
specified type and number of belts should be installed
● Belts not mounted according to the specified
(Depending on the application, please upgrade the belt
number of belts
Early failure
● High heat generated and large flex fatigue
Crack
specification by 1 level)
● Not using the specified belt type
Take counter-measure on heat dissipation or change
(overly small pulley diameter/ bending angle and high
the system design - alter the pulley diameter,
revolution speed)
revolution speed, bending angle
● Tension loss and slippage
Apply appropriate tension
● Tension loss and slippage
Apply appropriate tension
● Use under high temperature
Take counter-measure on heat dissipation
● Continuous sudden stoppage and start-up
Change the system design
● Oil contamination
Fix oil leak and prevent oil contamination
● Pulley diameter too small
Change the system design
● Too strong reverse bending due to backside tension
Install belt cover
● Tension pulley diameter too small
Use a larger diameter tension pulley
● Small bending angle
Decrease the bending angle
● Loose tension and occurrence of slippage
Apply appropriate tension
● Rusty pulley groove or rough finishing of pulley groove
Perform uniform finishing on the pulley groove surface
surface
Wear
(Standard 12S to 6S)
● Tension loss and slippage
Apply appropriate tension
● Inappropriate pulley installation angle
Change alignment to 1/3° and below or
● Defective pulley form
replace the pulley
● Inappropriate pulley groove angle ● Damage on pulley groove
Excessive vibration
Peeling
● Resonance due to unstable fixture of machine body
Secure the fixtures
● Weak belt tension
Change inter-shaft distance
● Belt lengths not uniform
Use matched set
● Belt used beyond its transmission capacity
Mount belts with the right specification, type, number
● Usage under deformed condition
Change the system design
Ⅴ Troubleshooting
Base crack
● Direct exposure to sunlight
● Usage method resulted in large flex fatigue ● Sudden stop and start during usage
Consider changing the system design for smooth operation
Noise problem
● Belt tension too loose
Apply appropriate tension
● Overload
Increase belt width or increase the number of belt in use.
● Wrong belt type
Select belt type, specification that matches the operating conditions
Overturning of belt
● Inappropriate pulley groove angle, installation angle
Change alignment to 1/3° and below
● Pulley groove damage or sticking of belt due to roughly
Replace the pulley
finished surface ● Wear at pulley groove ● Belt lengths not uniform during multiple usage
Use matched set
70
2. CONVEYOR BELTS Product Lineup ........................................ P72 NEOFLEXSTART® . ............................ P73〜78 FREESPANTM Belt . ............................. P79, 80
Conveyor Belts & Related Products
NEOFLEXSTART®
FREESPAN® Belt
Conveyor Belt
Conveyor Belts
Polyurethane Screen
ROUND CONVEYOR
PORTFLEX®
Related Products
Applications & Properties
Product Lineup Conveyor Application
Conveyor Products
Conveyor System Products
Peripheral Products
Rubber Conveyor Belt
• A brasion resistance, heat resistance, oil resistance, suitable for inclined conveyance
Plastic Belt NEOFLEXSTART®
• • •
FREESPAN® Belt
• Synchronous conveyance
Suitable for food product conveyance, small diameter pulleys For logistic terminal, production line Heat resistant, non-adhesive
ROUND CONVEYOR
• Circling, diverging conveyance
PORTFLEX®
• Steep angle conveyance
Polyurethane Screen
• Oscillating separation screen
GRIPTITE®
• Plastic pulley lining material
Application Examples
NEOFLEXSTART
®
Synchronous Transportation Conveyor Belt
FREESPAN® Belt
CONVEYOR BELTS
Light-duty Plastic Conveyor Belt
72
Conveyor Belts
Characteristics & Use
The NEOFLEXSTART® will support automation and manpower reduction at production and logistics sites. This product will support a wide range of conveyor systems. Each Mitsuboshi “NEOFLEXSTART® U, V, F, P” has its own unique characteristics. Thus, it is most important to select the correct belt to maximize the belt’s performance.
Safe, clean, stylish
Color
White, green, black
Color
: White, green, dark blue
Color
Brown, black, white, red
Color
Transparent
It works well in many fields, but it is best used for conveyor lines that require cleanliness. Using special polyurethane cover with excellent mildew resistance and water resistance, It is most suitable for conveying food products. Also, it has excellent anti-static properties.
It fits in a wide-rang of applications. Also, after-processing such as adding crosspieces is easy. It works well in conveyance of oily items, plywood, chemical products and various kinds of loads. Excellent abrasion, ozone and chemical resistance, as it is covered with high-quality PVC plastic.
It is usable under various conditions in which cold / heat resistance and/or non-adhesive qualities are required. Excellent heat resistance and non-adhesiveness as it is coated with Teflon or silicone. It works well in the places where belt conveyance is difficult due to high temperature
CONVEYOR BELTS
and characteristics of transporting items such as adhesive items and chemicals.
The best to be used in conveyance of sticky items like bread dough Polyolefin resin provides superior performance when used in conveyance of sticky items like bread dough. Excellent for food conveyance.
73
Oil and Chemical Resistance Table NS-U Category
Oil & Lipids
Disinfectant
Solvent
Bases
Acids
Other chemicals
Name of Chemicals
UG UFG UR UFR UHG
BK Type
NS-V
UPG 0/0 Type
UKG
VG VN
SS Type
NS-F
VKU
VKG
FG
FK
NS-P SG
PN
Animal oil
○
○
○
○
○
△
△
△
○
○
○
○
Vegetable oil
○
○
○
○
○
△
△
△
○
○
○
○
Mineral oil
○
○
○
○
○
×
×
×
○
○
○
○
DOS
△
○
△
○
△
×
×
×
○
○
○
△
Grease
○
○
○
○
○
△
△
△
○
○
○
△
Paraffin oil
○
○
○
○
○
○
○
○
○
○
○
○
Cutting oil
×
○
×
○
○
×
×
×
○
○
×
×
Sodium Hypochlorite 400ppm
○
△
○
○
○
△
△
△
○
○
○
○
Methyl Alcohol (Methanol)
○
○
○
○
△
△
△
△
○
○
○
○
Ethyl Alcohol
○
○
○
○
△
△
△
△
○
○
△
○
Acetone
×
×
×
×
×
×
×
×
○
○
×
△
Gasoline
×
×
×
×
×
×
×
×
○
○
×
△
Toluene (Triol)
×
×
×
×
×
×
×
×
○
○
×
△
Methyl Ethyl Ketone (MEK)
×
×
×
×
×
×
×
×
○
○
×
×
Formaldehyde (Formalin) 37%
×
×
×
×
○
○
△
○
○
○
○
△
Ammonia solution
○
△
○
△
○
○
△
○
○
○
○
○
Sodium Hydroxide (Caustic Soda) 10%
×
×
×
×
△
△
×
△
○
○
○
○
Developing fluid (Hydroquinone)
○
○
○
○
○
○
○
○
○
○
○
○
Nitric acid 5%
×
×
×
×
○
○
×
○
○
○
○
○
Hydrochloric acid 5%
○
×
×
×
○
○
×
○
○
○
○
○
Sulfuric acid 50%
×
×
×
×
△
△
×
△
○
○
×
△
Acetic acid 10%
×
×
×
×
△
△
×
△
○
○
○
○
Sodium Chloride (salt)
○
○
○
○
○
○
○
○
○
○
○
○
Soap
○
○
○
○
○
○
○
○
○
○
○
○
Fertilizer (general)
○
○
○
○
○
○
○
○
○
○
○
○
○ =Applicable △ = Possibility of damage × =Not applicable
Electrostatic Potential Running Electrostatic Potential ( Measured Values at Mitsuboshi) ∗For antistatic belts such as NS82UG0/2G, NS-V, as they are processed for static prevention inside, the surface resistance values are the same as non-antistatic belts.
Running Electrostatic Potential (V) (Absolute Value) NS82UG0/2G* 1000 & below NS-U All antistatic belts NS41UG0/2BK 50 & below NS82UG0/2BK
Test conditions:
NS-V
Belt speed 150m/min Temperature 25±5°C Humidity 50±10%
NS-F NS-P
All antistatic belts Antistatic belt
200〜1000
NS14FG-B NS15FK-B
50 & below
Non-antistatic belt
20000〜30000
Antistatic belt
1000 & below
Adding Profiles (NEOFLEXSTART®-U,V)
Guides (For preventing meandering)
Low Profiles (For preventing loads from falling)
Cleats (For slopes)
Lugs (For steep angle conveyance)
CONVEYOR BELTS
The following are the examples of profiles which can be added to the belt.
Hole Punching We provide hole punching on your requests.
74
Conveyor Belts
Cover Top Surface
Product Code Color
Thickness mm
Underside
Surface Condition
Color
Thickness mm
Heat & Humidity Resistance/ Prevention of Loose Threads NS41UG0/2G Green Grey 0.2 Flat NS41UG2/2G 0.2 Green Green 0.2 Flat NS82UG0/2G Green White 0.2 Flat NS82UG0/5G Green White 0.5 Flat NS82UG2/2G 0.2 Green Green 0.2 Flat NS123UG0/5G Green White 0.5 Flat Antibacterial / Antifungal NS41UFG0/2W White White 0.2 Flat NS41UFG2/2W 0.2 White White 0.2 Flat NS82UFG0/2W White White 0.2 Flat NS82UFG0/5WS White White 0.5 Texture pattern (coarse) NS82UFG0/5W White White 0.5 Flat NS82UF2/2WP 0.2 White White 0.2 Flat NS123UFG0/5W White White 0.5 Flat Super Antistatic NS41UG0/2BK Black Grey 0.2 Flat NS82UG0/2BK Black White 0.2 Flat Slip, Accumulator (Storage) NS41UG0/0 White Polyurethane impregnated conductive fabric White NS41UG0/0G Green Polyurethane impregnated conductive fabric Green NS82UG0/0 White Polyurethane impregnated sideslip fabric White NS82UG0/0G Green Polyurethane impregnated sideslip fabric Grey NS41UHG0/2W White White 0.2 Flat NS41UHG0/2G Green Grey 0.2 Flat NS82UHG0/2W White White 0.2 Flat NS82UHG0/2G Green White 0.2 Flat Sideslip NS82UPG0/0 White Polyurethane impregnated sideslip fabric White NS82UPG0/0G Green Polyurethane impregnated sideslip fabric Grey Sloped Conveyance NS41UKG0/5GT Green Grey 0.5 Longitudinal groove NS82UKG0/8GT Green Grey 0.8 Longitudinal groove Round Conveyor NS41UFR0/5W White White 0.5 Flat NS41UR0/5G Green Grey 0.5 Flat NS82UFR0/2W White White 0.2 Flat NS82UR0/2G Green White 0.2 Flat (Note): All types of NEOFLEXSTART -U can be used in metal detector machine (except BK)
Surface Condition
No. of Total Tension Thickness Member mm Ply
Polyurethane impregnated conductive low noise fabric Texture pattern (fine) Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Texture pattern (fine) Polyurethane impregnated conductive low noise fabric
1 1 2 2 2 3
0.8 1.1 1.4 1.7 1.7 2.5
Polyurethane impregnated conductive low noise fabric Texture pattern (fine) Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Flat Polyurethane impregnated conductive low noise fabric
1 1 2 2 2 2 3
0.8 1.1 1.4 2 1.7 1.7 2.5
Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric
1 2
0.8 1.4
Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric
1 1 2 2 1 1 2 2
0.6 0.6 1.3 1.3 0.8 0.8 1.4 1.4
Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric
2 2
1.3 1.3
Polyurethane impregnated conductive low noise fabric Polyurethane impregnated conductive low noise fabric
1 2
1.4 2.3
Polyurethane impregnated conductive fabric Polyurethane impregnated conductive fabric Polyurethane impregnated conductive fabric Polyurethane impregnated conductive fabric
1 1 2 2
1.0 1.0 1.5 1.5
®
Cover Top Surface
CONVEYOR BELTS
Product Code
Underside
No. of Total Tension Thickness Member mm Ply
Color
Thickne
Surface Condition
Color
Thickness mm
Surface Condition
NS41VG5/5G
Green
0.5
Flat
Green
0.5
Texture pattern (fine)
1
1.7
NS82VG5/5W
White
0.5
Flat
White
0.5
Texture pattern (fine)
2
2.7
NS82VG5/5G
Green
0.5
Flat
Green
0.5
Texture pattern (fine)
2
2.7
NS183VN0/20W
White
2.0
Flat
White
-
Polyurethane impregnated conductive fabric
3
5.1
NS183VN0/20G
Green
2.0
Flat
White
-
Polyurethane impregnated conductive fabric
3
5.1
NS82VG0/5G
Green
0.5
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
2.1
NS82VG0/5W
White
0.5
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
2.1
NS82VG0/20G
Green
2.0
Flat
White
-
Polyurethane impregnated conductive low noise fabric
2
3.6
NS82VKG5/5DB
Dark Blue
0.5
Flat
Dark Blue
0.5
Texture pattern (fine)
2
2.7
NS82VKUG5/8DBT
Dark Blue
0.8
Longitudinal groove
Dark Blue
0.5
Texture pattern (fine)
2
3.1
NS82VKG0/20GD
Green
2.0
Deep groove
White
-
Polyurethane impregnated conductive low noise fabric
2
5.3
NS122VN0/20GSS
Green
2.0
Rough top
Grey
-
Polyurethane impregnated low noise fabric
2
5.5
General Oil Resistance
Low Noise
Sloped Conveyance
75
Characteristics
G=Loose threads prevention, side rigidity, low noise F= Antibacterial, antifungal H=Slippery, nonadhesive P=Sideslip (palletizer) K=Sloped conveyance R=Trough, round conveyor
Weight kg/m
2
Allowable Tension N/mm
Surface Condition
Color
S=Texture pattern (coarse) W=White T=Longitudinal groove G=Green BK=Black P=Two-sided, flat
NEOFLEXSTART Abbreviation
Surface Figure
Permitted Tension (kN/mm)
Color
No. of Tension Member Ply
Top Cover Thickness (1/10mm)
Material (Polyurethane)
Minimum Pulley Diameter mm
Knife Edge Radius
Usable Temperature Range Dry Heat Temperature ∗3°C
mm
Wet Heat Temperature°C
Underside Cover Thickness (1/10mm) Characteristics
Table- Antistatic Drive Specification
Product Code
Heat & Humidity Resistance/ Prevention of Loose Threads NS41UG0/2G ○ ○ NS41UG2/2G × ○ NS82UG0/2G ○ ○ NS82UG0/5G ○ ○ NS82UG2/2G × ○ NS123UG0/5G ○ ○ Antibacterial/ Antifungal 0.7 4 15 R3 0~80 -30~100 NS41UFG0/2W ○ ○ 1.0 4 30 0~80 NS41UFG2/2W -30~100 × × ○ 1.5 8 25 (15) ∗1 (R3) ∗2 0~80 NS82UFG0/2W -30~100 ○ ○ 1.9 8 25 (15) ∗1 0~80 NS82UFG0/5WS -30~100 × ○ ○ 1.9 8 50 0~80 NS82UFG0/5W -30~100 × ○ ○ 2.0 8 70 0~80 NS82UF2/2WP -30~100 × × ○ 2.6 12 100 0~80 NS123UFG0/5W -30~100 × ○ ○ Super Antistatic 0.7 4 15 R3 0~70 -30~80 NS41UG0/2BK ○ ◎ 1.5 8 25 (15) ∗1 (R3) ∗2 0~70 NS82UG0/2BK -30~80 ○ ◎ Slip, Accumulator (Storage) 0.4 4 20 R3 0~80 -30~100 NS41UG0/0 ○ ○ 0.4 4 20 R3 0~80 NS41UG0/0G -30~100 ○ ○ 1.1 8 40 (30) ∗4 0~80 NS82UG0/0 -30~100 × ○ ○ 1.1 8 40 (30) ∗4 0~80 NS82UG0/0G -30~100 × ○ ○ 0.7 4 15 R5 0~80 NS41UHG0/2W -30~100 ○ ○ 0.7 4 15 R5 0~80 NS41UHG0/2G -30~100 ○ ○ 1.5 8 25 (15) ∗1 (R3) ∗2 0~80 NS82UHG0/2W -30~100 ○ ○ 1.5 8 25 (15) ∗1 (R3) ∗2 0~80 NS82UHG0/2G -30~100 ○ ○ Sideslip 1.1 8 30 0~80 -30~100 NS82UPG0/0 × ○ ○ 1.1 8 30 0~80 NS82UPG0/0G -30~100 × ○ ○ Sloped Conveyance 1.0 4 25 0~70 NS41UKG0/5GT -30~80 × ○ ○ 2.2 8 50 (25) ∗1 0~70 NS82UKG0/8GT -30~80 × ○ ○ Round Conveyor 1.1 R5 4 20 0~80 NS41UFR0/5W -30~100 ○ ○ 1.1 R5 4 20 0~80 NS41UR0/5G -30~100 ○ ○ 1.6 8 30 0~80 NS82UFR0/2W -30~100 × ○ ○ 1.6 8 30 0~80 NS82UR0/2G -30~100 × ○ ○ ∗1,2: ( ) indicates values when permitted tension is 5N/mm and below. ∗3: For products indicated as Max 100°C, operating temperature is Max 80°C under continuous operation. ∗4: Lightning Endless type 4 4 8 8 8 12
Characteristics
G=Loose threads prevention, side rigidity, low noise K=Sloped conveyance X= Low noise
Weight
15 30 25 (15) ∗1 50 70 100
R3 × (R3) ∗2 × × ×
Surface Condition
-30~100 -30~100 -30~100 -30~100 -30~100 -30~100
0~80 0~80 0~80 0~80 0~80 0~80
Color
NEOFLEXSTART Abbreviation W=White G=Green Permitted Tension (kN/mm) G2=Dark green No. of Tension Member Ply GY=Grey DB=Dark blue Material (Polyvinylchloride)
R=Texture pattern (fine) D=Deep groove SS=Rough top M=Diamond pattern
Allowable Tension N/mm
Minimum Pulley Diameter mm
Knife Edge Radius
1.9
4
2.8
Usable Temperature Range
Surface Figure Color Top Cover Thickness (1/10mm) Underside Cover Thickness (1/10mm) Characteristics
Table- Antistatic Drive Specification
Product Code
mm
Dry Heat Temperature °C
Wet Heat Temperature°C
35
×
-10~80
0~60
×
○
NS41VG5/5G
8
70
×
-10~80
0~60
×
○
NS82VG5/5W
2.8
8
70
×
-10~80
0~60
×
○
NS82VG5/5G
5.8
18
120
×
-10~80
0~60
○
○
NS183VN0/20W
5.8
18
120
×
-10~80
0~60
○
○
kg/m
2
General Oil Resistance
CONVEYOR BELTS
0.7 1.0 1.5 1.9 1.9 2.6
NS183VN0/20G Low Noise
2.3
8
50
×
-10~80
0~60
○
○
NS82VG0/5G
2.3
8
50
×
-10~80
0~60
○
○
NS82VG0/5W
4.1
8
100
×
-10~80
0~60
○
○
NS82VG0/20G Sloped Conveyance
2.8
8
75
×
-10~70
0~60
×
○
NS82VKG5/5DB
3.4
8
75
×
-10~70
0~60
×
○
NS82VKUG5/8DBT
4.2
8
80
×
-10~70
0~60
○
○
NS82VKG0/20GD
6.5
12
80
×
-10~70
0~60
○
○
NS122VN0/20GSS
76
Conveyor Belts
Total Thickness mm
Weight
NS03FG-P NS05FG-P
Surface
Kg/m2
Allowable Tension N/mm
Color
Condition
0.075
0.3
2
Brown
0.125
0.3
2
Brown
NS06FG-P
0.150
0.3
2
NS10FG-P
0.250
0.5
NS14FG-P
0.350
NS27FG-P
Product Code
Tension Member
Cover Material
Table-Drive
Flat
Glass fiber
Teflon
○
Flat
Glass fiber
Teflon
○
Brown
Flat
Glass fiber
Teflon
○
3
Brown
Flat
Glass fiber
Teflon
○
0.7
6
Brown
Flat
Glass fiber
Teflon
○
0.680
1.1
9
Brown
Flat
Glass fiber
Teflon
○
NS22FG-S
0.550
0.7
8
Brown
Flat
Glass fiber
Teflon
○
NS05FG-B
0.125
0.2
2
Black
Flat
Glass fiber
Teflon
○
NS06FG-B
0.150
0.3
2
Black
Flat
Glass fiber
Teflon
○
NS10FG-B
0.250
0.5
3
Black
Flat
Glass fiber
Teflon
○
NS14FG-B
0.350
0.7
6
Black
Flat
Glass fiber
Teflon
○
NS27FG-B
0.680
1.1
9
Black
Flat
Glass fiber
Teflon
○
NS06FG-TR
0.150
0.3
2
Brown
Flat
Glass fiber
Teflon
○
NS10FG-TR
0.250
0.5
3
Brown
Flat
Glass fiber
Teflon
○
NS19FG-M
0.600
0.5
6
Brown
Mesh
Glass fiber
Teflon
○
NS21FG-M
0.750
0.4
4
Brown
Mesh
Glass fiber
Teflon
○
NS30FG-M
0.920
0.4
3
Brown
Mesh
Glass fiber
Teflon
○
NS15FK
0.350
0.4
6
Brown
Flat
Aramid fiber
Teflon
○
NS15FK-B
0.350
0.3
6
Black
Flat
Aramid fiber
Teflon
○
NS30FK-M
0.700
0.4
8
Brown
Mesh
Aramid fiber
Teflon
○
NS24SG-R
0.610
0.8
8
Red
Flat
Glass fiber
Silicone
×
NS24SG-W
0.610
0.8
8
White
Flat
Glass fiber
Silicone
×
NS42SG-R
1.060
1.5
12
Red
Flat
Glass fiber
Silicone
×
NS42SG-W
1.060
1.5
12
White
Flat
Glass fiber
Silicone
×
Cover Top Surface
Product Code
Thickness mm
Surface Condition
NS32PN0/5NM
White transparent
0.5
Diamond pattern
White
-
Polyurethane impregnated conductive low noise fabric
2
1.9
NS11PN3/5NM
White transparent
0.5
Diamond pattern
White transparent
0.3
Flat
1
1.4
Transparent
-
Diamond pattern
Transparent
-
Flat
-
1.5
CONVEYOR BELTS
(Note) NS15PNM is polyolefin sheet and cannot be used as a belt.
Color
Thickness mm
No. of Total Tension Thickness Member Ply mm
Color
NS15PNM
77
Underside Surface Condition
Characteristics
FG=*Teflon/ glass fiber FK=*Teflon/ aramid fiber SG= Silicone/ glass fiber (Cover material/ tension member material) * is registered trademarks of Dupont
Surface Condition
Color
Usable Temperature Range Dry Heat Wet Heat Temperature °C Temperature °C
Minimum Pulley Diameter mm
Knife Edge Radius mm
Belt Type
NEOFLEXSTART Abbreviation
S=Standard Type (Standard specification) W=White P=Premium Type (Flat and smooth specification) R=Red M=Mesh Type (Standard specification) B=Black TR=Tear Resistant Type
Material Belt Thickness (shown value x 25.4/1000mm)
Maximum Antistatic Manufacturable Specification Width mm
Specification, Category
Product code
-150~270
0~80
70
×
×
1000
Premium series
NS03FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS05FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS06FG-P
-150~270
0~80
70
×
×
2000
Premium series
NS10FG-P
-150~270
0~80
70
×
×
1500
Premium series
NS14FG-P
-150~270
0~80
70
×
×
2300
Premium series
NS27FG-P
-150~270
0~80
70
×
×
1500
Standard series
NS22FG-S
-150~270
0~80
70
×
○
1500
Antistatic type
NS05FG-B
-150~270
0~80
70
×
○
1500
Antistatic type
NS06FG-B
-150~270
0~80
70
×
○
2000
Antistatic type
NS10FG-B
-150~270
0~80
70
×
○
1500
Antistatic type
NS14FG-B
-150~270
0~80
70
×
○
2600
Antistatic type
NS27FG-B
-150~270
0~80
70
×
×
1000
Tear resistance
NS06FG-TR
-150~270
0~80
70
×
×
1000
Tear resistance
NS10FG-TR
-150~270
0~80
100
×
×
1500
1mm mesh
NS19FG-M
-150~270
0~80
100
×
×
1500
2mm mesh
NS21FG-M
-150~270
0~80
100
×
×
2500
4mm mesh
NS30FG-M
-150~180
0~100
70∗
×
○
2000
Kevlar core
NS15FK
-150~180
0~100
70∗
×
×
1500
Aramid fiber core Antistatic type
NS15FK-B
-150~180
0~100
30
×
×
2000
Aramid fiber core 4mm mesh
NS30FK-M
-70~150
0~80
70
×
×
950
Silicone series
NS24SG-R
-70~150
0~80
70
×
×
950
Silicone series
NS24SG-W
-70~150
0~80
70
×
×
950
Silicone series
NS42SG-R
-70~150
0~80
70
×
×
950
Silicone series
NS42SG-W
∗ φ30 can be used when permitted tension is 1 N/mm and below (except inter-open endless type).
Surface Condition
M=Diamond pattern
Color
N=Transparent
NEOFLEXSTART Abbreviation
Surface Figure
Permitted Tension (N/mm)
Color
No. of Tension Member Ply
Top Cover Thickness (1/10mm)
Material (Polyolefin)
Weight
Allowable Tension N/ mm
Minimum Pulley Diameter mm
Knife Edge Radius mm
1.7
3
40
1.0
1
40
1.0
-
-
kg/m
2
Operating Temperature Range
Underside Cover Thickness (1/10mm)
TableDrive
Antistatic Specification
0~60
○
○
NS32PN0/5NM
0~50
× -
× -
NS11PN3/5NM
Dry Heat Temperature °C
Wet Heat Temperature °C
×
-10~60
× -
-10~50 -10~50
0~50
Product Code
NS15PNM
CONVEYOR BELTS
Characteristics
PN=Polyolefin
78
Conveyor Belts
FREESPANTM Belt FREESPANTM Belt is polyurethane timing belt consists of thermoplastic polyurethane and steel cords. This belt is suitable for synchronous transportation and power transmission requiring accurate positioning. The tension members are parallel to esch other to ensure a suitable synchronouse drive. Polyurethane aslo good physical properties and good chemical resistance. Belt temperature range is from -30℃ to 80℃ . Belt type, Dementions & Product code Trapezoidal Tooth Profile Standard color : White Polyurethane : Thermoplastic Polyurethane Shore A 92 Standard Cords : S and Z zincked steel cord
Tooth profile
Thickness (mm)
1.2 2.2
T5
2.2
4.5
2.5
4.5
Width(mm)
2 shafts
Ω layout
100m
8 10 16 25 32 50 75 100
12
18
○
○
○
100m
10 16 25 32 50 75 100
14
20
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1.2
2.7
10.0
AT5
2.7
4.5
2.5
4.5
3.60
L 9.525
79
2.29
4.36
H 12.70
3.6
1.90
CONVEYOR BELTS
10.0
100m
15
25
100m
10 16 25 32 50 75 100 150
15
25
14
20
4.36
0.37inch (9.53mm) 0.50inch (12.7mm) 0.75inch (19.1mm) 3937inch 1.00inch (25.4mm) (100m) 1.50inch (38.1mm) 2.00inch (50.8mm) 3.00inch (76.1mm) 4.00inch (101.6mm) 0.50 inch (12.7mm) 0.75 inch (19.1mm) 1.00 inch (25.4mm) 3937inch 1.50 inch (38.1mm) (100m) 2.00 inch (50.8mm) 3.00 inch (76.1mm) 4.00 inch (101.6mm) 6.00 inch (152.4mm)
Jointed Fabric Cleats belt Type
25 T5−100000−***−**
8 10 16 25 32 50 75 100 150
5.0
AT10
Belt Options
Product Code
Roll Length
5.0
T10
Minimum Pulley teeth
Standard
Standard Dimensions
Belt Width (mm)
Length(mm)
Tooth profile
ML:Open end MJ:Jointed
FT :Fabric Tooth Side FB :Fabric Back Side FTB:Fabric Tooth and Back side
050 L−39370−***−** Length (inch×10)
ML:Open end MJ:Jointed
Tooth profile Belt Width (inch×100)
14
20
FT :Fabric Tooth Side FB :Fabric Back Side FTB:Fabric Tooth and Back side
FREESPANTM Belt Belt type, Dementions & Product code Round Tooth Profile Standard color : White Polyurethane : Thermoplastic Polyurethane Shore A 92 Standard Cords : S and Z zincked steel cord
Standard Dimensions
2.1
HTD5M
Thickness (mm)
3.6
Tooth profile
3.6
Standard
Minimum Pulley teeth
Roll Length
Width(mm)
2 shafts
Ω layout
100m
10 15 25 50 75 100 150
14
20
100m
10 15 20 30 50 85 100 150
20
25 40 55 85 100 115
28
3.4
HTD8M
5.6
5.0
5.6
6.0
HTD14M
10.0
8.0
10.0
50m
14.0
Belt Options
Product Code
Jointed Fabric Cleats belt Type
○
○
○
○
○
○
○
○
○
25 HTD5M−100000−***−**
30
Belt Width (mm)
Length(mm)
Tooth profile
ML:Open end MJ:Jointed
FT :Fabric Tooth Side FB :Fabric Back Side FTB:Fabric Tooth and Back side
28
Profile (Cleats) Freespan belt can be welded variously shaped Cleats on the Belt.
Standard Rectangle Cleats Standard color : White Polyurethane : Thermoplastic Polyurethane Shore A 92
t P H
Thickness (t) 2mm ~ 10mm ( ± 0.5mm) Height (H) 20mm ~ 50mm ( ± 0.5mm) Tolerance of the positioning ± 0.5mm ≦ 250mm ± 0.5mm Cleats Pitch 250mm< ≦ 500mm ± 1.0mm Tolerance (P) 500mm< ± 2.0mm
Special Cleats
CONVEYOR BELTS
The special cleats are available. Please contact us for details.
80
M
81
E
M
O
3. E NGINEERING PLASTIC PRODUCTS Engineering Plastics Size Table.............................................P83, 84
General Purpose Engineering Plastics 1. Casting Nylon..................................................... P85 2. UHMW-PE.....................................................P86, 87 3. Polyacetal........................................................... P88
High Performance Engineering Plastics 1. PEEK® ................................................................. P89
Note
1. PEEK® is a registered trademark of Victrex®.
ENGINEERING PLASTIC PRODUCTS
Size Table A: Rod Type
Standard stocked item: ●
Name
Casting Nylon (CN)
Grade UD (Ivory)
Improving mechanical strength significantly and reducing physical degradation under high temperature.
NB (Blue)
Blue colored grade which maintains physical properties of cast nylon UD.
CL (Green)
Improving frictional property substantially by our own lubricant formulation. Excellent lubricity property by evenly blending molybdenum disulfide It has physical properties closer to casting nylon while mechanical strength is enhanced than standard nylon 6 extrusion products. With small friction, it has excellent abrasion and shock resistance as well as antiadhesive properties. Also, nontoxic. Better abrasion, thermal ageing and UV resistance than UHMW-NA. Also, it has high antistatic property.
UD (Ivory) NB (Blue) NA (White)
Ultra-High Molecular Weight Polyethylene (UHMW-PE)
ASB (Black) ASG (Mint green)
Light color, antistatic. Less surface abrasion against plastic bottles.
Homopolymer (DELRIN®) (White) (Black) Polyacetal Copolymer (DURACON®) Engineering Polymers (White) (POM) (Black) Copolymer-BG (Green)
Grade
1,000×1,000 500×1,000 600×1,200
Ultra-High Molecular Weight Polyethylene (UHMW-PE)
940×1,920 1,000×2,000 600×1,200
Polyacetal Engineering Polymers (POM)
PEEK® (Polyetheretherketone)
500×1,000
500×1,000
Characteristics
●
●
500L 1,000L
●
●
●
●
●
●
●
●
300L 500L 1,000L 500L 1,000L
●
●
●
●
△
△
△
△
△
△
△
△
●
●
●
●
△
△
△
△
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
● ● ●
1,000L
●
●
●
●
●
●
●
●
1,000L
△
△
△
△
●
●
●
●
1,000L 1,000L
●
1,000L 1,000L
●
1,000L
(Light brown)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
(Unit:mm) 6
7
8
20 25 30 35 40 45 50 60 70 80 90 100 120 10 12 15
● ● ● ● ● ● ● ● △ △ △ △ ● ● ● ● △ △ △ △ △ △ △ △ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● NA ● ● ASB NA ● ● ● ASB ● ● ● ● ● ● ● ● Copolymer (White) (Black) ● ● ● Homopolymer (DELRIN®) (White) ● ● ● Copolymer (DURACON® ) ● ● ● ● ● ● ● ● ● (White)(Black) ● ● ● ● ● Copolymer-BG (Green) ● ● ● ● M5BK (Black) ● ● ● NA △ △
UD・ENB CL MD UD・ENB CL MD UD・ENB UD・ENB CL MD
30 35 40 45 ● ● ● ● ●
Non-stocked item: △ Plate Thickness 1 2 2 3 5
10 12.5 15 17.5 20 22.5 25
●
1,000L
Excellent mechanical properties and chemical resistance. Allpurpose High performance engineering plastic with maximum continuous operating temperature of 240°C.
Standard stocked item: ●
Casting Nylon (CN)
ENGINEERING PLASTIC PRODUCTS
Excellent lubricity property addition to mechanical strength and dimension stability of polyacetal.
B: Plate Type
1,000×2,000
83
Excellent mechanical strength, especially creep properties and fatigue resistance
NA (Light brown)
8
1,000L
Excellent mechanical strength, fatigue resistance and dimension stability.
PEEK® (Polyetheretherketone)
Name
Outer Diameter Length 4 5 6 500L 1,000L
Characteristics
MD (Black) Casting Nylon EX (CN-EX)
Non-stocked item: △
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ ● ● ● ● ● ● ● ● ● ● ● △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △ △ ● ● ● ● ● ● ● ● △ △ △ △ △ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △ △ ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △ △ △ △ △
● △ △
● △
(Unit:mm) 50 ●
55 ●
60 ●
65 70 ● ●
75 ●
80 ●
85 ●
90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 380 400 450 500 550 600 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● △ △ △ △
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
△
● ●
△
△ △
△ △
△ △
△ △
△ △
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
△
△
△
△
△
△
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
△
△
C: Pipe Type
△
△
△
△
△
△
△
△
△
●
△
△
●
●
△
Non-stocked item: △
(Unit:mm)
Outer Diameter Name Length Grade Inner Diameter 60 65 70 70 75 80 80 90 90 100 100 110 120 130 140 150 150 165 180 200 200 225 225 250 250 285 300 300 330 350 400 430 25 40 25 45 50 30 55 40 65 50 75 60 70 80 90 100 125 115 100 100 150 115 175 125 200 225 150 250 165 175 350 250 Casting 1,200 Nylon (CN) 350
UD・NB MD UD・NB CL MD
△ △ △ △ △
△ △ △ △ △
△ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △ △ △ △ △
△ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △
△ △ △ △ △ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △
△ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △ △
ENGINEERING PLASTIC PRODUCTS
Note 1. DELRIN® is a registered trademark of DuPont®. 2. PEEK® is a registered trademark of Victrex®. 3. DURACON® is a registered trademark of Polyplastics K.K.
84
ENGINEERING PLASTIC PRODUCTS
1. Casting Nylon 1-1. MEP® Casting Nylon Grades ■ CN-UD
Ivory
Load Bearing
■ CN-NB
Blue
Load Bearing
By improving mechanical strength, a characteristic of casting nylon, and reducing physical degradation under high temperature, it can be used under heavy loads like machinery parts for where only metal is used. CN-NB is a blue colored grade of CN-UD and has the same properties as CN-UD.
■ CN-MD
Black
Light Load Sliding
■ CN-CL Green
It has enhanced sliding property base on excellent properties of casting nylon by evenly blending molybdenum disulfide.
(Non-lubricated) Sliding
By our own patented production method, it has outstandingly high abrasion resistance while maintaining the excellent properties of casting nylon. Also, it has lubrication performance which withstands prolonged operating time.
1-2. MEP® Casting Nylon EX Grades ■ CN-UDE Ivory Light to medium withstand load
■ CN-NBE Blue Light to medium withstand load
It has physical properties closer to casting nylon while mechanical strength is enhanced than standard nylon 6 extrusion products. It is economical and best to be used as machinery parts such as small sized gears, roller bearings, rollers, etc. CN-NBE is blue colored grade of CN-UDE with the same properties as CN-UDE.
1-3. Applications ① ③ ⑤ ⑦
Metal and steel facility ② Transport equipment Construction machinery ④ Machine tools Industrial machinery ⑥ Shipbuilding, heavy industrial machinery LCD, semiconductor manufacturing equipment
1-4. Properties of Casting Nylon Table 1. Properties of Casting Nylon
ENGINEERING PLASTIC PRODUCTS
Property
85
ASTM Test
Unit
CN-UDE CN-NBE
CN-UD CN-NB
CN-MD
CN-CL
1.15~1.16 78 ~93 20~50 3.0~3.5 93~108 103~123 34~54
1.16~1.17 74~83 15~40 2.8~3.3 88~98 98~118 30~50
1.12~1.13 59~74 10~40 2.0~2.5 74~83 78~93 37~65
1.15 76 48 2.9 91 110 33
113~117 0.20 1,046 9.0 120~150 170~195 205~210 1014 18~22
107~112 0.20 1,046 8.6 100~120 105~115 170~180 1014 18~22
120 0.20 1,250 9.0 100~120 94 193 1014 25.0
Density Tensile Strength Tensile Elongation Secant Modulus Compressive Strength Flexural Strength Izot Impact Strength (1/2in x 1/2in notched) Rockwell Hardness Thermal Conductivity Specific Heat Capacity Coefficient of Thermal Expansion Continuous Use Temperature Heat Distortion
D792 D638 D638 D638 D695 D790 D256
MPa % 103MPa MPa MPa J/m
D785 C177 D696 D648
R scale W/(m・K) J/(KG・K) 10-5 ℃ ℃ ℃
Volume Resistance Dielectric Strength (Short interval 3.2mm) Relative Permittivity
D257 D149
Ω • cm KV/mm
115~120 0.20 1,046 8.0 140~170 185~200 210~215 1014 18~22
Loss Tangent
D150
Water Absorption (24 hours 3.2mm) Allowable PV Index
D570
%
3.7 3.7 3.7 0.02 0.02 0.02 0.5~0.9
3.7 3.7 3.7 0.02 0.02 0.02 0.9~1.2
3.7 3.7 3.7 0.02 0.02 0.02 0.6~0.8
4.0 3.7 3.4 0.01 0.04 0.04 1.3
820
980
2,290
820
D150
-
kPa・m/sec
2. UHMW-PE
(Ultra-High Molecular Weight Polyethylene)
2-1. MEP® UHMW-PE Grades ■ UHMW-NA
White
Standard Grade
UHMW-NA is a standard grade of Ultra-High Molecular Weight Polyethylene whose molecular weight is from 3.5 to 6.5 million. It has excellent abrasion resistance, low friction coefficient, antiadhesive property, chemical resistance, cold resistance and food safety.
■ UHMW-ASB Black
High Antistatic Grade
UHMW-ASB is a grade with high antistatic performance. Its surface resistance is at a very low level of 104, thus making it suitable to use as a static protection in LCD and semiconductor manufacturing equipment. Also it has excellent abrasion and weather resistance.
■ UHMW-ASG Light Green
Antistatic Grade
UHMW-ASB is an upgrade of UHMW-ASG, which antistatic property is added. Its surface resistance is 1011. It has high abrasion resistance and suitable for food production and bottling lines. Particularly, it has a low friction coefficient and good anti-abrasion, and does not scratch PET plastic containers.
2-2. Applications ① ③ ⑤ ⑦
Food production facility Cement facility Fodder storage facility Chemical facility
② Transport equipment ④ Coal storage facility ⑥ LCD, semiconductor manufacturing equipment
2-3. Properties of UHMW-PE Table 2. Properties of UHMW-PE ASTM Test
Unit
Density Tensile Strength Tensile Elongation Secant Modulus Compressive Strength Flexural Strength Izot Impact Strength (1/2in x 1/2in notched) Rockwell Hardness Thermal Conductivity Specific Heat Capacity Coefficient of Thermal Expansion Continuous Use Temperature Heat Distortion
D792 D638 D638 D638 D695 D790 D256
103MPa MPa MPa J/m
D785 C177 D696 D648
R scale W/(m・K) J/(KG・K) 10-5 ℃ ℃ ℃
Volume Resistance Dielectric Strength (Short interval 3.2mm) Relative Permittivity
D257 D149
Ω ・cm KV/mm
Loss Tangent
D150
Water Absorption (24 hours 3.2mm) Allowable PV Index
D570
MPa %
D150
-
% kPa・m/sec
UHMW-NA
UHMW-ASB
UHMW-ASG
0.94 37 365 0.5 19 26 No damage
0.96 28 250 0.6 19 25 No damage
0.98 28 215 0.4 15 15 No damage
52 0.38 2,300 20
55 0.44 2,200 19
53 0.38 2,300 19
80 96 >1013 -
80 98 104 -
80 78 1011 -
2.3 1~2 × 10-4 1~2 × 10-4 1~2 × 10-4