Painting Specification [PDF]

Citation preview

PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP Document No.: MTDF-BBS-MR-0275-3320-A0106-1001



February 20, 2015 Rev. 1 Page 1 of 4



Table of Contents 1.



PAINT MATERIALS FOR CLIENT APPROVAL ............................................................... 2 Table 1.1. International Manufacturer ....................................................................................... 2



2.



PLANT COLORS AND IDENTIFICATION ......................................................................... 2 Table 2.1. Colors For CPI Separator .......................................................................................... 3 Tabel 2.2. Colors For Safety Identification ................................................................................. 3



Annex B – System L1-SS Brand: International Paint ................................................................... 4



MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1



PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP



February 20, 2015 Rev. 1



Document No.: MTDF-BBS-MR-0275-3320-A0106-1001



Page 2 of 4



1. PAINT MATERIALS FOR CLIENT APPROVAL Materials specified or referenced by manufacturer’s name and/brand are intended to describe the type and quality level of material desired and are not intended to be restrictive or to exclude similar items by other manufacturer. Alternate material require approval from the ENGINEER before being used. Any approval given by the ENGINEER for alternate materials and/or application methods is subject to change if the performance of the alternate materials or application method is later found to be inferior to the specified materials and methods. Approval is limited to application over surfaces operating at and application conditions less severe than the conditions stated in the published literature of the paint material manufacturer. Equipment fabricator shall refer paint supplier product datasheet before applying painting.



Table 1.1. International Manufacturer Type & Paint Supplier



Inorganic Zinc Silicate



Epoxy Zinc Rich



Epoxy Mastic



Acrylic Urethane



Phenolic Epoxy



Silicone Acrylic



Silicone Alumunium



Epoxy MIO



Carbo Zinc 11



Carbo Zinc 859



Carboguard 890



Carbothane 134 HG



Phenoline 1205



Thermaline 4900



Thermaline 4700



Supplier to provide detail to contractor/ owner



Inter Zinc 22



Inter Zinc 52



Interseal 670 HS



Interthane 990



Interthane 228; Interline 850



Intertherm 875



Intertherm 50



Dimetcote 9 Series



Amercoat 68 HS



Amerlock 400/2



Amercoat 450 H Series



Amercoat 90 HS



Amercoat 874 HS



Amercoat 878



Supplier to provide detail to contractor/ owner Supplier to provide detail to contractor/ owner



Carboline



Akzonobel/ International Paint



PPG Amercoat



2. PLANT COLORS AND IDENTIFICATION Painting colors on CPI Separator shall be as per Tabel 2.1. Structure shall be color coded to warn personnel of potensial physical hazard for safety. Safety identification color coding shall be in accordance with the Table 2.2. Except for safety color coding and unless otherwise stated in following tables, the finish colors shall be light ivory for equipment and structural stell. 1. External Coating for CPI Separator Annex B – System L1-SS Brand: International Paint MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1



PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP



February 20, 2015 Rev. 1



Document No.: MTDF-BBS-MR-0275-3320-A0106-1001



Page 3 of 4



Table 2.1. Colors For CPI Separator Item Name



Surface Preparation



Priming Coat



Intermediate Coat



Top Coat



CPI SEPARATOR



Near White Metal Blast Cleaning (SSPC SP 10)



High solid epoxy “Interseal 670 HS“ (DFT 125 µ) Thinner GTA 220



Mist Coat “Intethane 990” (DFT 30 µ) Thinner GTA733



Aliphatic polyurethane “Interthane 990” (DFT 50 µ) Thinner GTA733



Color RAL No



Light Gray Min. 175 µ RAL 7038



Tabel 2.2. Colors For Safety Identification This table describes the colors required for safety of Operators. Safety Identification Colors Item To Be Painted



Color



RAL Code



Dangerous obstructions



Black/Yellow Lines sloped at 45° minimum 50% of surface yellow



RAL 9005/1021



Dangerous or exposed parts of machinery



Alert Orange



RAL 2003



Fire-Fighting equipment



Fire Red



RAL 3000



First aid equipment



Dark Green



RAL 6028



Rigging/Lifting items: Davits, Lifting beams, overhead traveling cranes and portal cranes



Static parts Yellow/Black Lines sloped at 45° minimum 50% of surface yellow



RAL 1021/9005



Moving parts Alert Orange



RAL 2003



Top & Bottom of handrails for ladders and stairways, where indicated



Yellow



RAL 1021



Platform Maintenance Deck



Yellow



RAL 1021



Road Marking



White



RAL 9010



Red



RAL 3002



Alert Orange



RAL 2003



Dark Green, White lettering



RAL 6028, RAL 9010



Identification for “Stop” and “Danger”,e.g. flammable liquid containers, emergency stop switches, fire protection equipment and apparatus Identification for marking hazardous parts of machines which may cut, crush, or other wise injure Identification for “Safety” and location of “First Aid”, and “Safety Equipment



MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1



DFT Micron



PAINTING SPECIFICATION CPI SEPARATOR FOR MGDP



February 20, 2015



Document No.: MTDF-BBS-MR-0275-3320-A0106-1001



Annex B – System L1-SS Brand: International Paint



MTDF-BBS-MR-0275-3320-A0106-1001 Rev.1



Rev. 1 Page 4 of 4