Honeywell Black AHD DVR Manual [PDF]

Citation preview

DVR



Installation & Operation Manual



Warning: Do not put heavy objects on the device. Do not let any solid/liquid fall or penetrate into the device. Please regularly brush the circuit boards, connectors, fans, chassis, etc.. Turn off the power and unplug it before cleaning. Do not disassemble/repair the device or have components replaced by yourself. Environment: Sunlight exposure and heat should be avoided. Do not install the device under damp environment. Do not expose the device under smoky & dusty environment. Please avoid strong collision or accident dropping. Please install the device horizontally in a stable place and avoid it from falling. Please install the device in ventilated place. Keep the vent clean. Can only be used within the rated input and output.



2



Directory Chapter 1 Instructions for Products ………………………………………………………………………….4 1.1．Product Introduction ……………………………………………………………………………..4 1.2．Open-package and cable connection check …………………………………………….. … 5 1.3. Basic Operation……………………………………………………………………………… 11 1.4. Main menu………………………………………………………………………………………….24 1.5. FAQ and Maintenance………………………………………………………………………… ..67 1.6. Appendix……………………………………………………………………………………….. ..70 Chapter 2 CAL-CMS200 Instruction………………………………………………………………………..72 2.1 Software Instruction……………………………………………………………………………….72 2.2 Installation Instruction……………………………………………………………………………73 2.3 CAL-CMS200 Operation Main menu…………………………………………………………..76 2.4 Preview…………………………………………………………………………………………….78 2.5



System information……………………………………………………………………………...80



2.6



Recording…………………………………………………………………………………….. 103



2.7 Advanced……………………………………………………………………………………….108 Chapter 3 CALNVRView Manual…………………………………………………………………………125 3.1 Instruction………………………………………………………………………………………125 3.2 Installation………………………………………………………………………………………125 3.3 Software Operation Manual…………………………………………………………………..126 Chapter 4 Remote Cloud Operation……………………………………………………………………...133



3



Chapter 1 Instructions for products 1.1．Product Introduction 1.1 .1 Product overview The DVR series, as excellent digital surveillance products are specially designed for security and surveillance field. Embedded LINUX operating system is introduced to ensure system stability. With advanced H.264 high profile video compression and its unique temporal filtering algorithm, it's quite easy to achieve high-quality image along with synchronous low bit rate audio & video surveillance. Additionally, it also introduces TCP/IP and other network technology, which equips it with powerful network data transmission capacity as well as remote control capacity. The DVR series can not only be used individually, but also form a powerful security and surveillance network via getting access to the internet. What's more strong network data transmission capacity and remote control capacity can be realized with professional network video surveillance platform software. The DVR series can be applied in bank, telecommunication, power, judicature, transportation, intelligent community, factory, warehouse, resource, water conservancy facilities and many other fields. 1.1.2 Main functions Real-time surveillance · With spot interface, analog output port, VGA port and HDMI interface, to realize surveillance through monitor or displayer. Storage •Non-working HDD dormancy processing which is convenient to radiate heat, reduce power and extend the life-span •With proprietary format , stored data can't be tampered, which ensures data security. Compression •Real-time compression via independent hardware which ensures the audio and video signal stability & synchronization. Backup •Through SATA interface and USB interface such as USB equipment, removable HDD and so on. •Download file through net and store it in HDD. Playback ·Individual real-time video recording as well as searching, playback, network surveillance, recording check, downloading and so on ·Multi-playback mode ·Zoom at arbitrary region Net operating ·Realize long-distance real-time monitoring via net(mobile included). ·Long-distance PTZ control ·Long-distance video search and real-time playback



4



Alarm linkage ·Alarm links with video recording, tour, message, buzzer, e-mail and FTP. Communication interface ·With RS485 interface to achieve alarm input and PTZ control. ·With RS232 interface to realize mastering via extending keyboard connection, system maintenance and upgrade with computer serial port connection as well as matrix control. ·With standard Ethernet network interface to fulfill long-distance control. Intelligent operating ·Mouse operation ·Fast and convenient copy and paste function for same settings. 1.2．Open-package and cable connection check 1.2.1 Open-package and check When you receive the DVR, please open and check . First, please check whether there is any visible damage to the package appearance.he protective materials used for the package of the DVR can protect most accidental clashes during transportation. Then, please open the box and get rid off the plastic protective materials. Check whether there is any visible damage to the DVR appearance. At last, please open the machine crust and check the data wire in the front panel, power wire, the connection between the fan power and the main board. 1.2.2 Front panel and rear panel The key function specification in the front panel and the interface specification in the real panel are in the specification. Please check the product type in the front panel whether is accordant with the product type you order. The label in the real panel is very important for the after service. Please protect it carefully. When you contact us for after service, please provide the product type and serial number in the label. Check first after you open the case After open the cover, you should check if it has obvious damage trace, also please check the front panel data cable, power cord and motherboard's connection are loose or not. Hard disk installation For the first using ,please install the hard disk, this machine box can install two hard disk(no limited capacity).



5



①disassemble the screw



④fix the screw of hard disk



⑦cover the machine



②disassemble the cover



③fix the screw of hard disk



⑤connect the data wire



⑥connect the power wire



⑧fix the cover



Shelf installation This product chassis specification for the standard 1u,so it can be installed in the standard shelf. Installation steps and attention items: 1, Keep the equipment have 15cm(6 inches)space around in order to air's circulation. 2, From bottom to shelf installation. 3, When multiple components install in the frame，please take preventive measures to avoid power socket overload Audio and video input and output connections 1, Video input connections 2, No video input interface Insure the camera signal stable and credible The camera should be installed in the appropriate location where is away from backlighting and low illumination or adopts the better backlighting and low illumination compensation. The ground and power supply of the camera and the DVR should be shared and stable. Insure the transmission line stable and credible Video output connections and options The video output is divided into PAL/NTSC BNC(1.0VP-P,75Ω) and VGA output(selective configuration). When replace the monitor by the computer display, there are some issues to notice 1、Do not stay in the turn-on state for a long time.



6



2、Keep the computer display normal working by demagnetizing regularly. 3、Stay away from the electronic magnetic Interference. TV is not a credible replacement as a video output. It demands reducing the use time and control the power supply and the interference introduced by the nearby equipment strictly. The screen page of low quality TV can lead to the damage of other equipment. Audio signal input Audio port is BNC connection.（only one port is for bidirectional talk）。 The impedance of Audio input is high, so active pickup must be adopt. The audio signal line should be firm and away from the electronic magnetic Interference and connected credible which avoid false and joint welding and oxidation. The high voltage current should be avoided especially. Audio signal output Audio port is BNC connection. The input impedance is high so the tone arm must be active. The audio signal line should be firm and away from the electronic magnetic Interference and connected credible which avoid false and joint welding and oxidation. The high voltage current should be avoided especially. Commonly the output parameter of DVR audio signal is greater than 200mv 1K Ω (BNC) which can connect the low impedance earphone and active sound box or other audio output equipments through power amplifier. If the sound box and the tone arm can’t be isolated, howling phenomena is often existed. There are some methods to deal with the above phenomena. 1, Adopt better directional tone arm. 2, Adjust the sound box volume to be under the threshold that produces the howling phenomena. 3, Use fitment materials that absorb the sound to reduce reflection of the sound. 4, Adjust the layout of the sound box and the tone arm. Alarm input and output connections Before connecting the device, please pay attention to follow situations: Note: T series have no alarm input/output functions. Alarm input Alarm input is grounding alarm input. Alarm input demand is the grounding voltage signal. When the alarm is connected with two DVRs or connected with DVR and other equipments, it should be isolated by relay. Alarm output 7



Alarm output can’t be connected with high-power load(no more than 1A).When forming the output loop it must prevent the big current from relay damage. Use the contact isolator when there is a high-power load PTZ decoder connections A, The grounding of the PTZ decoder and DVR must be shared otherwise the common-mode voltage will lead to the PTZ control failure. The shielded twisted pair is recommended. B., Avoid the entrance of high voltage. Make the layout reasonably. Take precaution from the thunder. C. In the outlying end connect 120Ω resistance paralleled to reduce the inflection and insure the signal quality. D. The 485 AB lines of DVR can not connected with other 485 output equipments paralleled. E. The voltage between the AB lines of the decoder must be less than 5V. Front equipment grounding note Bad grounding can lead to the burnout of the chip. Alarm input type unlimited The DVR alarm output port is constant opening type. Eight external alarm interface



(1) alarm input 1,2,3,4 (6) ground



(2) ground (3) RS232 (4) RS485 (5) alarm input 5,6,7,8



(7) alarm output



Sixteen external alarm interface



8



①⑥⑧alarm input



Parameter



②⑦ground



③alarm output



⑤RS485



④RS232



meaning



G



Grounding



R,T



RS232 port



A,B



485communciate interface which is connected with the recording control equipments such as the decoder



Alarm input port specification 8 channels alarm input. Alarm input type unlimited. The grounding and the com port of the alarm sensor are parallel (The alarm sensor is external power supply) . The grounding of the alarm and the DVR should be shared. The NC port of the alarm sensor must be connected with the DVR alarm input port. The grounding of the power supply and the alarm sensor must be shared when used in external power supply. Alarm output port specification 2 channels alarm output. There is external power supply when using the external alarm equipment. Please refer to the relay relevant parameters to avoid the overload that damages main machine.



9



Alarm output port relay parameters Type：JRC-27F Interface material



Silver



rating



Rating switch capacity



30VDC 2A, 125VAC 1A



(resistance load)



maximal switch power



125VA 160W



maximal switch voltage



250VAC, 220VDC



maximal switch current



1A



Homo-polarity interface



1000VAC 1minute



Inhomo-polarity



1000VAC 1 minute



interface Interface and winding



1000VAC 1 minute



Homo-polarity interface



1500VAC (10×160us)



isolation



Surge voltage Turn-on time



3ms max



Turn-off time



3ms max



longevity



mechanical



50×106 MIN（3Hz)



electric



200×103 MIN (0.5Hz)



Speed dome connections Connect the 485 lines of the speed dome with the DVR 485 interface.



the 485 interface of eight external alarm



the 485 interface of sixteen external alarm 2.Connect the video line with the DVR video input. 10



3.Electrify the speed dome 1.3, Basic operation Note: The button in gray display indicates nonsupport. 1.3.1 Turn on Plug the power supply and turn on the power supply switch. Power supply indicator light shining indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video output is multiple-window output mode. If the startup time is within the video setting time, the timing video recording function will start up automatically. Then the video indicator light of corresponding channel is shining and the DVR is working normally. Note:1, Make sure that the input voltage corresponds with the switch of the DVR power supply. 2, Power supply demands: 220V±10% /50Hz. Suggest using the UPS to protect the power supply under allowable conditions. 1.3.2 Turn off There are two methods to turn off the DVR. Entering [main menu] and choosing [turn off] in the [turn off the system] option is called soft switch. Pressing the power supply switch is called hard switch. Illumination: 1、Auto resume after power failure If the DVR is shut down abnormally, it can automatically backup video and resume previous working status after power failure. 2、Replace the hard disk Before replacing the hard disk, the power supply switch in the real panel must be turned off. 3、Replace the battery Before replacing the battery, the setting information must be saved and the power supply switch in the real panel must be turned off. The DVR uses button battery. The system time must be checked regularly. If the time is not correct you must replace the battery, we recommend replacing the battery every year and using the same battery type. Note: The setting information must be saved before replacing the battery otherwise information will lose. 1.3.3 System Login When the DVR boots up, the user must login and the system provides the corresponding functions with



11



the user purview.There are three user settings. The names are admin, guest and default and these names have no password. Admin is the super user purview; guest and default’s permissions are preview and video playback. User admin and guest’s password can be revised, while their permissions can’t be revised; user default is the default login user whose permission can be revised but not its password.



Login Password protection: If the password is continuous wrong three times, the alarm will start. If the password is continuous wrong five times, the account will be locked. (Through reboot or after half an hour, the account will be unlocked automatically). For your system security, please modify your password after first login.



1.3.4 Preview You can right click mouse to choose the switch between the windows. The system date, time and channel name are shown in each viewing window. The surveillance video and the alarm status are shown in each window. 1



Recording status



3



Video loss



2



Motion detect



4



Camera lock



Preview icon



12



Preview Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu,as the picture 3.2 shows.The menu includes: main menu, record mode, playback, PTZ control, High Speed PTZ, Alarm Output, color Setting, Output adjust, Logout, view mode shift ,spot.



13



Shortcut menu Main Menu Including all function operation



main menu Video Playback Play the video profile in the hard disk, there are two ways to access video play back interface: by shortcut menu In the desktop, or by 【main menu】>【video】>【video playback】. 14



Notes: If it’s normal about the device, the hard disk that needs to store video profile, must be set as reading and writing or reading only（please refer to 4.5.1hard disk management）。



15



Video playback 1



Playback control



2



Operation hint 3



Record mode



4



Time interval



5



Switch by time,file mode



6



File searching 7



Channel choosing



8



Date choosing



9



Storage device choosing



10



File information



Listed files



12



Time searching



11



【Listed files】 Display files that accord with the searching criteria. 【File information】 Show file information. 【Playback control】 See details in below chart Button



Function



Button



Function



16



/



Play/Pause



Backward play



Slow forward



Fast forward



Previous frame



Next frame



Previous file



Next file



Round play



Full screen



Stop Playback control key Note: Frame by frame play should be under paused status. 【Operation hint】Show key function that cursor places.



Special functions： Local zoom: When the system is in single-window full-screen playback mode, left-click your mouse anywhere on the screen to zoom the selected area, double click to exit. Note: When current resolution of the channel is over max resolution, a Red X will show when playback the channel. Record Control Please check current channel status: “○” means it is not in recording status, “●” means it is in recording status. You can use desktop shortcut menu or click [Main menu]> [Record]> [Record Conf] to enter the record control interface.



17



Record Control 【Schedule】Record according to the configuration. 【Manual】 Whatever state the channel is in, select Manual button to record the corresponding channel. 【Stop】 Whatever state the channel is in, select Stop button to stop recording the corresponding channel. PTZ control PTZ control, the digital channel need to link PTZ, the remote device should connect with PTZ and with protocol correctly set also. Control PTZ on the connected device, you can enter the interface through desktop shortcut menu. Operation interface is as follows. The functions include: PTZ direction control, step, zoom, focus, iris, preset operation, tour, pattern, border, assistant switch, light switch, auto-pan and so on. Note: 1. Before operating, make sure decoder A(B)line connects with NVR A(B)line. 2. Click [Main menu] >[System] >[PTZ Configuration] to set the PTZ parameters. 3. The PTZ functions are decided by the PTZ protocols.



18



Preset input box



Preset calls



PTZ setup 【Speed】Set the PTZ rotation range. The higher the number is ,the faster the speed can get to Setting range: 1 ~ 8, Default:5 【Zoom】Click / button to adjust the zoom multiple. 【Focus】Click / button to adjust the focus . 【Iris】Click / button to adjust the iris. 【Hide】Current interface will be temporarily hidden after clicking. 【Direction control】Control the PTZ rotation. 8 directions control are supportive.(Only 4 directions of front panel are supportive ) 【High speed PTZ】Full-screen show channel image. Left press mouse and control PTZ to rotate orientation. Left press mouse and then rotate the mouse to adjust the zoom multiple. 【Set】Enter the function configuration menu. 【Page switch】Enter the function operation menu. Special functions： Preset Set a location for the preset , PTZ automatically turns to the setting position 1）Preset setting Set a location for the preset, procedure is as follows: Step 1: Click the Preset in Figure 3.7 button to input value in the preset box. Step 2: Click the Direction button to turn into preset position，click before the 【preset】button to add preset. Clear Preset：Input preset points, click before the 【preset】button, remove the preset.



19



Senior PTZ settings 2）Preset Point Calls Input the preset points, then click Start button to call the preset point Tour Multiple preset points connected tour, and the PTZ run around on the line. 1）Tour Settings Tour is connected by multiple preset points, setting procedure is as follows: Step1：Click Senior button in Picture 3.7 to senior PTZ settings. Step2：Click tour Start button in Picture 3.8 to enter Tour Settings.



Tour setup Step3：Choose preset points need to add in the Picture3.9 the preset point selection drop-down menu, 20



click Add preset points button to finish add. Step4：Repeat step3 to get all the preset designated Cruise lines. Remove Preset：Choose preset points need to remove in the Picture3.9 the preset point selection drop-down menu, click Remove Preset button to finish remove. Remove Tour：Input the number of tour, click Start button, then remove the tour set。 2）The Calls of Tour In Picture 3.8, please input the number of tour in the value blank, then click Start button to call the tour. Scan Set a tour route by operating the PTZ.PTZ also can work on the preset scan line repeatedly. 。 1）Scan setup Setting steps: Step1: In Picture 3.8, click Start button, enter Picture 3.10； Step2: You can set the following items: Zoom, Focus, Aperture or Direction and so on in Picture3.10. Click Finish button to go back to Picture 3.8.



Scan setup 3.8 Scan Calls In Picture 3.8, Please input the number of scan in the value blank , then click Start button to call scan. Boundary Scan In a horizontal line，set up a line，call scan，PZT repeat operation according to the route Boundary Scan setup Set a period of horizontal curve for PTZ search path, the steps are as follows: Step1：In Picture 3.8, click Direction button to turn the PTZ to preset direction, then click the left boundary. Step2：In Picture 3.8, click Direction button to turn the PTZ to preset direction, then click the right boundary. Step3: Setup complete, it is the position of left and right boundary. Notes: when the left and right scan in one horizontal, the PTZ will cycle rotate from left scan along the reverse direction to the right scan. When the left and right scan not in the same horizontal, then the PTZ will regard the end of horizontal line which connects to the left as right scan. It is cycling rotate from left scan along the reverse direction 21



to the right scan. Boundary Scan Calls In Picture 3.8, click Scan button，PTZ begins to work on the scan line . Click Stop button to stop. Horizontal Rotating Click Horizontally Rotating button, PTZ begins to rotate horizontally (relative to the original position of the camera). Click Stop button to stop. Rotate Click horizontal Rotating button, PTZ turn around. Reset PTZ restart, all the data clears to 0. Page Switch In Picture 3.8, click Page Switch button into Picture3.11, setting auxiliary function. Auxiliary Number correspond to auxiliary switch on the decoder.



3.11 Auxiliary Function Control 【Direct Aux open】 Choose auxiliary equipment, select Open or Close button, switch control； 【Aux Num open】Operate corresponding auxiliary switch according to PTZ agreement； 【Page Switch】In Picture 3.13，click Page Shift button to enter Picture 3.10 PTZ Main Menu , the menu can be control by the menu control buttons. Output Adjust Adjust TV output area parameters. You can use the desktop shortcut menu or enter [Main menu]> [Advanced]> [Output Adjust]. Adjust the parameters of the output area, can use shortcut menu on the desk and also can access to the output interface by 【main menu】>【management tools】>【adjust the output】



22



Adjust the output Turn off system To control logout, turn off, and restart, there are two ways to access to turn off system interface: by the shortcut Menu in the desktop, or by【main menu】



Turn off system 【logout】logout from menu ,need to login again to access to menu next time. 【turnoff】logout from system, turn off power supply, when press turnoff, there is a message to confirm 23



process bar, and turn off within 3 minutes, it’s not valid on the halfway. 【restart】logout from system, and restart system 1.4. Main menu 1.4.1 Main menu GPS Main menu



Video records



Sub-menu



Function outline



Video setting



Setup the video configuration ,type, time period about every channel



Video play back



Inquire, play, save the video



Backup video



Check ,format the backup device, backup profile.



Motion detect



set the alarm channel of motion detect, and set linkage parameters: protection Period, alarm output, screen tips, video, PTZ, cruising by turns, buzzing, email, and FTP



Video blind



Loss video



set the alarm channel of motion detect, and set linkage parameters: protection Period, alarm output, screen tips, video, PTZ, cruising by turns, buzzing, email, and FTP



Alarm input



set the alarm channel of motion detect, and set linkage parameters: protection Period, alarm output, screen tips, video, PTZ, cruising by turns, buzzing, email, and FTP



Alarm output



Setup alarm mode: configuration, manual, turnoff



alarm



Setup system



Setup the alarm channel of video blind, set linkage parameters: protection Period, alarm output, screen tips, video, PTZ, cruising by turns, buzzing, email, and FTP



Abnormal handing



No hard disk, hard disk error, insufficient space, no network, IP conflict set linkage parameters: screen tips or buzzing



Common setting



Setup system’s time ,form of date and time, language, the operation of full hard disk, number of local, video of making, way of output, standby time, DST



Network setting



Setup network parameters, and DHCP,DNS parameter, network high-speed download



Network service



PPPOE、NTP、Email、IP limits of authority、DDNS parameter And so on



Output mode



Setup preview tips icon state, transparency, resolution, and VGA priority.



RS485 device



Setup protocol, address, baud rate, data bits, stop bits, check



Serial port setting



Setup serial port, baud rate, data bits, stop bits, check



Round tour set



Setup the mode of round tour and interval time



24



Management tools



System information



Turn off system



Channel management



Setup the mode of channel, and view channels’ state, then setup parameter about the number mode.



Storage management



Setup the appointed hard disk as reading and writing ,reading only, redundancy, clear data, recover data



User management



Modify user, group, password, add user, group, delete user, and group.



Online user



Disconnect the network user registered, then the account Will be frozen until you turn on next time



Adjust output



Adjust the margin of upside, downside, left side and right side.。



Maintain automatically



Setup restart system automatically, delete the time of profile automatically.



Recover by default



Recover the state of sticky on top: common setting, video setting, alarm setting, network setting, network service, output mode, serial port setting and user management



System upgrade



Use external device(USB) to upgrade



Device information



Configuration information about device



Lead-in/leadout



Lead-out the device’s information or configuration (USB) to external device, and lead-I the information of external device(USB) to device.



Storage information



Show the capacity of hard disk, the time of video



Code stream statistics



Show the information of code stream



Journal information



According to journal video and time to inquire journal, and empty the whole information



Vision information



Show the information of vision Carry out logout, turn off, restart



1.4.2 Video Some relevant operation about recording: video configuration, video playback, video backup. 4.2.1 Video configuration Setup the parameter of monitoring channels, when it’s first time to start , the system will record it for 24 hours continuously.【main menu】>【video】>【video configuration】 Notes: when it’s recorded normally, the installed hard disk should be set a reading mode at least(refer to chapter4.5.1hard disk management)



25



Video setting 【channel】select relevant channel to set ,and set all the channels as optional. 【redundancy】select redundancy, to achieve two-backup in video profile, that means the video of any channel will be recorded to two hard disk. The device needs to be installed two had disks, one of them is reading and writing, another is a redundancy.(refer to chapter4.5.1 hard disk management) 【length】setup the time span of every video profile ,it’s 60 minutes by default. 【video mode】setup the state of video: configuration, manual and turnoff. configuration：according to the type and time period of video(common, detection and alarm) to record manual：whatever the state of channel, select “manual”, then the relevant whole channel will record normally. turnoff：whatever the state of channel, select “turnoff”, the relevant channels will stop recording. 【time span】setup the time span of normal video, only can start recording within the set time. 【type of video】setup the type of video: common, detection normal：within the set time ,to record normal video, the type is “R” detection: within the set time, touch the alarm signal “motion detect”, “video blind”, “video loss”, “abnormal handing”, and some relevant alarm setup as check video when it opens, the type is “M” 4.2.2 Video playback Same as chapter3.5.2 4.2.3 Video backup Through setting, backup the video profile to external device Note：The accommodate storage must be installed before the file backup. If the backup is terminated, the already backup can playback individually.



26



4.2 detect storage device 【Detect】 Detect the storage connected with the NVR such as HDD or universal disk. 【Backup】 Click backup button and the dialog box pops up. You can choose the backup file according to the type, channel and time. Remove：Clear the file information. Add：Show information satisfying the set file attributes.



Backup format：Configurate the backup file format, you can choose Start/pause：After choosing the files and the backup format ,click the play button to start the backup or click the pause button to stop. Note：During backup you can exit to carry out other functions. 【Burning】 The file will be burned synchronously after clicking. 【Erase】 Choose the file you want to delete and click erasure to delete it. 【Stop】 Stop the backup.



27



1.4.3 Alarm Function Alarm functions include: motion detect, video blind, video loss, alarm input and alarm output,abnormality Motion Detect When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the linkage function is turned on.



motion detect 【Channel】 Choose the set motion detect channel. 【Enable】 Means that the motion detection function is on, select enable button to configuration. 【Period】 Trigger the motion detect signal in the set time section. You can set according to week or set uniformly. Each day is divided into four time sections. Means the setting is valid.



28



Set the time section 【Interval】 Only one alarm signal is turned on even there are several motion detect signals in the set interval. 【Record channel 】Choosing the recording channel (multiple option supportive). Trigger the video signal when the alarm is turned on. 【Tour】■ means that the selective channel is single window alternate patrol preview. The interval is set in the [Main Menu]>[System] > [Tour]. 【PTZ Activation】 Set the PTZ activation when the alarm turned on. Note： PTZ linkage is about the channel corresponding to the remote device. To link PTZ, go [Shortcut menu]>[PTZ control] to set preset point, tour & interval time etc.



29



4.5 PTZ linkage 【Delay】 When alarm is over, recording will last some second (10~300sec), then stop. 【Show message】 Pop the alarm information dialog box in the local host computer screen. 【Send EMAIL】■ means sending an email to user when the alarm is turned on. Note: Set in the [Net Service] to send emails. 【Buzz】 When alarm happens, device will come out with buzz. 【FTP upload】 To tick it, the video & picture of corresponding record & snapshot files will be uploaded. Note： FTP upload needs to be set in [Net service] 【 Alarm message to the mobile】 After trigger alarm, device will push mobile phone reported, Note: mobile phone, need to set the PMS in [net service];Mobile devices to be connected to the public network and mobile devices and video need to install the specified mobile client application software.



30



Video Blind When the video image is influenced by the environment such as bad brightness or reaching the sensitivity parameter, the video blind function is turned on and the linkage function is turned on.



Video blind Video Loss When the equipment can’t obtain the channel video signal, the video loss alarm is turned on and the linkage function is turned on. Note: Both the DVR and the connected device need to enable this function, then it works. Advanced button works the same with the right of the mouse.



31



Video loss Set method: refer to Motion detect Abnormal Analyse and inspecting current software and hardware: When some abnormal events happen, the device will make a relative answer such as show message ,buzzer and so on.



32



Abnormal handing



【Event Type】 Selecting abnormity you need 【Enable】 Select it to make sure abnormal function works. 【Show message】 Automatically alarm cue dialog box comes out of the main screen. 【Buzzer】 Device will have one long noise when alarm is turned on. 1.4.4 System Configuration . Set the system parameters such as:General,Network, Net service,GUI display,PTZ configuration/RS485 ,RS232,Tour and channer management.



33



General



4.9 general setup 【System time】Set the system data and time. 【Date format】Choose the data format: YMD, MDY, DMY. 【Date Separator】Choose list separator of the data format. 【Time Format】Choose time format: 24-hour or 12-hour. 【Language】Support 29 language at present:S- Chinese,T-Chinese,English,Farsi,Finnish,French, Greek,Hungarian, Italian, Japanese, German, polish, Portuguese, Russian, Spanish, Thai, Turkish, Vietnamese, Romania, Brazil,Indonesia, Swedish, Arabic, Bulgarian, Czech, Hebrew, etc. 【HDD full】Choose stop record: Stop recording when the HDD is full. Choose overwrite: Cover the earliest recording files and continue recording when the HDD is full. 【DVR No.】Only when the address button in the remote controller and the corresponding NVR number is matched, the remote operation is valid. 【Video Standard】PAL or NTSC. 【Auto Logout】Set the latency time in 0-60. 0 means no latency time. 【Machine Name】Can set the device's name. 【DST】Choose the summer time option and pop the dialog box as follows. Set start time and end time by week or date.



34



4.10 DST (week)



4.11 DST (date) Network setup



35



Network setting 【Net Card】You can choose cable network card. 【DHCP Enable】Obtain IP address automatically(not suggested) Note:DHCP server is pre-installed. 【IP address】Set the IP address. Default: 192.168.1.10. 【Subnet mask】Set the subnet mask code. Default: 255.255.255.0. 【Gateway】Set the default gateway. Default: 192.168.1.1. 【DNS setup】Domain Name Server. It translates the domain name into IP address. The IP address is offered by network provider. The address must be set and reboot then it works. 【TCP port】Default: 34567. 【HTTP port】Default: 80. 【HS Download】:To download at a high speed. 【Transfer Policy】There are three strategies: self-adaption, image quality precedence and fluency precedence. The code stream will adjust according to the setup. Self-adaption is the tradeoff between the image quality precedence and fluency precedence. Fluency precedence and self-adaption are valid only when the sub-stream is turned on. Otherwise image quality precedence is valid. NetService Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters.



36



4.13 Network service 【PPPoE setup】



PPPOE Enable：Reverse■ means selected, setting is effective. Input the user name and password that ISP（Internet service provider）provides. After saving, reboot up your system. Then the NVR will build a network connection based on PPPoE. After that, the IP address will change into dynamic IP address. 37



Operation：After PPPoE dialing successfully ,check the IP address in the [IP address] and obtain the current IP address. Then use this IP address to visit the NVR through user client. 【NTP setup】 NTP is used for DVR synchronize its time with specified server in the period of setting.



NTP Host computer IP:Input the IP address which installs NTP server. Port: You can set the port according to NTP server. Update Period: The same with the NTP server check interval. 【EMAIL setup】 When the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm information or the snapshot photos to appointed address.



38



EMAIL setup SMTP server: Email server address. It could be an IP address or domain name. Domain name can be translated only when it is the correct DNS configuration. Port: Email server port number. SSL: Decide whether using Secure Socket Layer protocol to login. User Name: Applied email server user name. Password: Input the password corresponding to the user. Sender: Set the email sender address. Receiver: Send the email to appointed receivers when the alarm is turned on. You can set three receivers at most. Title: You can set as you wish. 【IP Filter】 IP Filter restricts IP address which connect the NVR



39



4.17Ip permission setting Black list: When choosing the black list, the listed IP address cannot connect the NVR. White list: When choosing the white list, only the listed IP address can connect the NVR 【DDNS】



4.18 DDNS setup It is the abbreviation of dynamic domain name server. Select the type of DNS. Local domain name：Provide the domain name registered by DDNS. 40



User name：Provide the account registered by DDNS. Password：Provide the password registered by DDNS. When the DDNS is successfully configured and started, you can input the domain name in the IE address column to visit. Note：The DNS setup must be configured correctly in the network setup 【FTP】 FTP is available only when alarm happens,or alarm activates record and snapshot,it will upload corresponding record and snapshot pictures to FTP server.



FTP setup 【Server IP】IP address for FTP server. The server needs to install the FTP client 【User Name, Password】User name of FTP. Password of user Note: The user should be with authority to upload files. 【ARSP】 Startup DDNS server to add devices and manage it in the DDNS server



41



ARSP 【Sever IP】IP address of DDNS server 【Alarm center】 When alarm occurs, report alarm information to alarm server. Note: Please set up server before using it, and the server should connect with NVR network.



4.21 Alarm center 【Wireless configuation】ADSL through 3G net card, use CMS to visit and configure the device.



42



Wireless Config 【UPNP】UPNP protocol is to realize auto port forwarding on router when video is connected to the router. Note: make sure UPNP enabled on the router when using this function.



UPNP 【WIFI】 NVR connect to wireless router via WIFI module, and then visit it through IP address. 43



Note: this function needs the SSID of wireless router and the password for WIFI.



WIFI Search：Click【search】to search all the available wireless device in current range. Password：Wireless network password of router 【RTSP】This function is to realize surveillance via cross-browser (Safari, Firefox, Google chrome) and VLC software. It is only for monitor but cannot control the device.



4.25 RTSP setup 【Enable】：■ means enable, Settings are effective after enabling. 【Port】：The default port is 554 【Cloud】 44



【Enable】means enable, user can enter http://calnvrview.net/to login with serial number.



Figure 4.26 Cloud 【PMS】When alarm occurs, report alarm information to specified mobile device. Note: mobile device need to install mobile client, and Video recorder and mobile devices be connected to the public network



4.27 Output mode Configure the parameters of video output signal. Local preview mode includes time display, channel title, record status, alarm status, anti-jitter, transparency and resolution.



45



Figure4.28 Output mode 【Time Display】■ means enable .Display the system data and time in the surveillance window. 【Channel title】■ means enable .Display the system channel number in the surveillance window. 【Record Status】Not supported. 【Alarm Status】■ means enable .Display the system alarm status in the surveillance window. 【Transparency】Choose the background image transparency. The range is 128~255. 【Resolution】Set display resolution. 【region coverage】cover Special area, after it, this area’s picture will not be seen. 【Time title] 】Display or hide the time title in the preview screen 【Channel title】Display or hide channel title in the preview screen 【Setup】 modifies the position of time title and channel title displaying in the preview screen RS485 Device



46



4.29 R485 device 【Protocol】Choose corresponding protocol for the model； 【Address】Set corresponding address, default is 1； 【Baud rate】Choose corresponding bard rate, default is 115200； 【Data bits】Include 5-8 options，default is 8； 【Stop bits】Include 2 options, default is 1； 【Parity】Include odd check, even check, sign check, blank check. Default: void. Serial port setting



47



Figure 4.30 serial port setting 【Serial Port Function】Common serial port ,used to debug and update program or set up specific serial port. 【Baud rate】Choose the corresponding baud rate length. 【Data bits】Include 5-8 options. 【Stop bits】Include 2 options. 【Parity】Include odd check, even check, sign check, blank check. Default: void. Tour setup Tour setup means that the tour mode is enabling. You can choose the single-view, four-view, nine-view, and sixteen -view of single mode tour or hybrid mode tour.



48



Figure 4.31 Tour setup 【Interval】Set the tour switch interval. The range is 5-120 seconds. 【Alarm tour】Set the tour switch interval for alarm, the range is 5-120 seconds, choose return when alarm ends. When alarm links to tour, system will automatically switch to six-view after alarm ends. Note：Under preview mode, click upper right icon means turn off）.



/



to turn on / off tour（



means turn on,



Channel management Include digital channel, channel status, and channel mode, and the second and third items only fit in mixed or pure online channel mode.



49



Channel management interface Digital channel:



50



4.33 Channel management interface 【Channel】 Select the channel number 【Enable】Means enable, Settings are effective after opening the digital channel function, and enabling. 【Time Synchronization】means enable ,which means channel syncs with device. 【Connection Mode】Single connection and multi-connection, multi-connection can connect to several devices, device will be displayed one by one, tour interval can be set, no less than 10s; 【Tour interval】Under multi-connection, set the time span of every camera’s picture in its corresponding Channel preview picture. 【Delete】Select the device, click delete will do. 【Add】Click add, the following interface will be seen.



51



4.34 remote channel configuration interface 【Configure Name】The device has a default configure name, user can revise it if necessary； 【Device Type】3 types: IPC、DVR、HVR，user can choose what they need, default is IPC； 【Protocol】Default is NETIP, ONVIF is optional. 【Remote channel】User can input remote channel number for the device connected remotely. 【Stream】Main stream and sub-stream. Default is main stream. 【Device address】the camera's IP address will be added. 【Network setting】Modify the NVR’s network configuration through DVR. 【Port】Default is 34567 【User name】Default is admin Note: Click the search button, the following devices will be displayed. Users can select whatever device to connect based on their needs. When the device has digital channel, all digital channel status can be displayed, including maximum resolution, current resolution, and connection status.



52



4.35 Note: When under multi-screen, sub-stream will be displayed, when under single screen, main stream will be displayed. when the current resolution is over the max resolution that the channel supports, then a red “X” will be shown on the preview image, for example: Under full digital channel mode, Max resolution of channel 3 is D1, if it was connected to a device with resolution over D1 ( such as 960H), you will see below pic:



4.36 Channel mode:



53



4.37 Note: Different models have different channel modes.User can shift the mode freely if necessary. 1.4.5 Manage tools: Manage tools menu include: HDD Management, Account Management, Online User, Output Adjust, Auto Maintain, Restore, Upgrade, Device Info, and Import/Export. HDD Management Configure and manage the HDD. The menu displays current HDD information, including: HDD numbers, input port, type, status and overall capability. The operations include: set the write-read disk, snapshot disk, read-only disk, redundant disk, format disk, recover disk, partition. Click the right button to operate. Note：Read/Write Disk: The device can write or read data. Read-only Disk: The device can read data but cannot write data. Redundant Disk: Double backup the video files in the write-read disk.



54



4.38 storage management Account Manage the user purview. Note: 1. The following user and user group names, etc. The character length is 8 bytes at most. The blank ahead or behind the character string is invalid. The middle blank in the character string is valid. Legal characters include: letter, number, underline, subtraction sign and dot,other characters are not allowed. 2. There is no limit in user and user group number. You can add or delete the user group. The factory setups include: user\admin. You can set the groups as you wish. User can appoint the purview in the group. 3. The user management include: group/ user. The group and user name cannot be the same. Each user must and can only belong to one group.



55



4.39 account management 【Modify User】Modify the existed user attribute. 【Modify Group】Modify the existed team attribute. 【Modify Password】Modify the user password. You can set 1-6 bit password. The blank ahead or behind the char string is invalid. The middle blank in the char string is valid. Note：The user who possess the user control purview can modify his/her own or other users password



56



4.40 Modify password 【Add user】 Add a user in the group and set the user purview. Enter the menu interface and input the user name and password. Choose the team and choose whether cover using the user. Cover using means that the account can be used by multiple users at the same time. Once choose the team the user purview is the subclass of the team. We recommend that the common user’s purview is lower than the advanced user.



57



4.41 Add User 【Add Group】Add a user group and set the purview. There are 33 different purviews: shut down the equipment, real time surveillance, playback, record setting, video backup and so on.



58



4.42 add group 【Delete User】Delete the current user. Choose the user and click delete user button. 【Delete Group】Delete the current group. Choose the group and click delete group button.



59



4.43 Delete Group Online User Checking the online user which is connected to the local device.Can also disconnect the net user（mark √ in the small box）, after disconnect the user will be frozen till reboot the device，Then can login by the user ID.



4.44 Online user Output adjust Same to output adjust. Auto-maintence User can set the time that reboot the system and the time of deleting the file.



60



4.45Auto-maintance Restore System restore the confg.to the default setting (Restore items can be selected by the menu.)



4.46 Restore note： In digital mode , there is no encoding setting selection in the restore. Upgrade



61



4.47System upgrade 【Where upgrade】 choose USB interface； 【Upgrading file】Choose the upgrading file Device info. Provide the device system info, can be set according to the client demand that be more convenient for client understand and use.



4.48 Device info. Import/Export Client can export the log and configuration of the device to extra-disk (like U disk), or import the configuration file from the extra-disk that improved the convenience level for client using.



62



4.49 Import/Export 1.4.6 System info. Display the device info, include the storage info. , stream information, log info, and version info. Storage info. Showing the situation of the HDD installation that include the HDD type, total capacity, rest capacity, status, recording time etc.



63



4.50 HDD info. Mark：In HDD “○”means HDD is normal ，“X” means HDD problem、“-”means no install success. If client need change the HDD, they need turn off the device and take out the HDD, then install the new HDD. In HDD “*” means HDD is in working status (like “1*), if the HDD is broken down, then the info. will show “?” letter. Model different, the number of the HDD is also different. BPS Real time display image stream （Kb/S） and HDD space （MB/H）, the waved diagram shows the stream changing.



64



4.51 BPS Log Checking the system log according to the way of setting. Log types include: System operation, configuration operation, data management, alarm event, recording operation, user management, file management, set the log time zone, click the checking button, then system will show all the recording log(each page max show 128 lines.)



65



4.52 Log Version info. Show the device basic info include the recording channel, system version, release data, SN and NAT situation etc.



66



4.53 Version info. 1.4.7 Turn off the system Same to “3.5.8 turn off the system”。 1.5. FAQ and maintenance 1.5.1 FAQ If the problems are not listed, please contact the local service or call the HQ service. We are willing to offer the service. Q: The DVR can’t boot up normally. A: Possible reasons are as followed: The power supply is not correct. Switch power supply line is not in good connection. Switch power supply is damaged. The program updating is wrong. The hard disk is damaged or the hard disk lines are broken. The front panel is damaged. The main board of the DVR is damaged. Q: The DVR reboots automatically or stops working after boot up a few minutes. A: Possible reasons are as followed: The input voltage is not stable or too low. The hard disk is damaged or the hard disk lines are broken. The power of the switch power supply is low. Frontal video signal is not stable. Bad heat radiator or too much dust or bad running circumstance for the DVR. The hardware of the DVR is damaged 67



Q:System can’t detect hard disk. A: Possible reasons are as followed: The hard disk power supply line is not connected. The cables of the hard disk are damaged. The hard disk is damaged. The SATA port of main board is damaged. Q: I can’t find the video files in local playback mode. A: Possible reasons are as followed: The data line of the hard disk is damaged. The hard disk is damaged. Update the different program with the origin program files. The video files to look up are covered. The recording is not on. Q: The local video is not clear. A: Possible reasons are as followed: The image quality is too bad. The reading program is wrong. Reboot up the DVR. The data line of the hard disk is damaged. The hard disk is damaged. The hardware of the DVR is damaged. Q: There is no audio signal in the surveillance window. A: Possible reasons are as followed: It is not an active tone arm. It is not an active sound box. The audio lines are damaged. The hardware of the DVR is damaged. Q: There is audio signal in the surveillance window but mo audio signal in the playback state. A: Possible reasons are as followed: Setting issues: the audio option is not chosen. The according channel is not connected with the video. Q: Wrong time display. A: Possible reasons: Wrong setting Battery contacts worse. Crystal oscillator problem. Q: DVR can’t control PTZ. A: Possible reasons: PTZ break down. PTZ codec setting , installation, cable connection not right. Wrong cable connection PTZ setting in DVR not correct. PTZ codec not compatible with DVR. protocol. PTZ codec not compatible with DVR address. When connecting more than 1 codec, the far-end of AB cable of PTZ codec should have 120 Ω to eliminate reflection, otherwise it will cause PTZ unstable. Far distance. Q: Motion detection no work? A: Possible reasons: Time setting not correct. Front-end camera not activated this feature. Hard ware limitation for specific version. Q: Can’t log in CMS or WEB interface. A: Possible reasons: ActiveX is stopped Have not installed dx8.1 or above, upgrade graphics card drive. Internet connection problem. Internet setting problem. 68



User name or password is not correct . CMS version and DVR firmware not compatible. Q: Mosaic or no video when previewing or replay video. A: Possible reasons: Internet works not smoothly. The DVR source is restricted. Have chosen “Multi-play” mode in DVR internet setting . This will cause mosaic . Private masking or channel protection is set. User doesn’t have the authority. DVR output problem. Q: Internet connection not stable A: Possible reasons: Internet is not stable. IP address conflict. MAC address confliction. Computer or network card of DVR has problem. Q: Record/USB backup problem? A：Possible reasons： CD writer and hard disc are connected to one same data line Data is too big, CPU is occupied , please stop recording ,then backup. Backup data is bigger than capacity will lead to wrong recording. Backup device not compatible Backup device is damaged. Q: Keyboard can’t control DVR? A: Possible reasons: Serial port setup not correct. Address is not correct. Power shortage if connected with many converter. Transmission distance is too long. Q: Alarm can’t be cancelled. A: Possible reasons: Incorrect alarm setting. Alarm-output opened manually. Input device problem or wrong correction. Firmware version problem. Q: Alarm can’t work. A: Possible reasons: Alarm setting is not right. Alarm connection is not right. Alarm input signal is not right. One alarm device connects to 2 circuits at the same time. Q: Remote controller can’t work. A: Possible reasons: Address is not right. Distance is too long or angle partial. Remote controller battery runs out. Remote controller is broken or DVR front panel is broken. Q: Video storage is not enough A: Possible reasons: Camera with poor quality , lens is too dirty, backlighting installation ,iris or lens not adjusted caused bigger stream HD capacity is not enough. HD is damaged. Q: Downloaded video can’t be played A: Possible reasons: No install player software. 69



Didn’t install DX8.1 or above Accelerated graphics software The converted AVI format file use MEDIA PLAYER to play，Didn’t install DivX503Bundle.exe plug-ins. Win xp system need to install DivX503Bundle.exe and ffdshow-2004 1012 .exe plug-ins. Q: The preview of IP channel can’t be displayed? A: Possible reasons: Can’t add the device. This channel device is not activated. This channel device is not chosen. The device is not connected with video source. The remote channel No .of chosen device is not exist. The code stream of remote channel setting is set to second stream. User name or password is not correct. Port is not right or adding a device by inputting IP address directly. The resolution is too big, that could not be displayed on screen. A: Can’t find any devices after clicking the “Search button “? A: Possible reasons: There is no other device in LAN. Subnet mask problem. Q: Time on IP channel is different with local time. A: Activate time sync in IP channel. Q: Video frozen when switching devices. A: Several buffering is normal when switching devices. 5.2 Use and maintenance: The dust on PCB easily causes short circuit after being damp, therefore affect the DVR working or even damage it. In order for a long and stable working, please use brush to clear PCB, fan, chassis regularly. Make sure the device grounding, to avoid video, audio signals to be affected by interference, and avoid DVR damaged by induced voltage or static electricity. Please don’t hot plug with RS-232, RS485 and video audio cable, otherwise the port will be damaged. Please don’t use a TV set to connect V-out, as it will easily damage the video output circuit. When power off DVR, please don’t cut power directly. Please use the “Power off” feature ,or use the “Power off” button (Press more than 3 seconds), to turn off the DVR without damaging hard disc. Keep DVR from high temperature environment. Keep DVR in good ventilation condition for a better hear dissipation. Inspect and maintenance DVR regularly. 1.6．Appendix Appendix1. Remote controller operation:



No.



Name



Function



1



Multi-screen button



Enter multi-screen interface.



70



2



Number button



Password input, Number input or channel switching



3



ESC



Return to previous page.



4



Direction



Direction and Enter button.



5



Playback button



Basic operation when playback video.



6



Recording button.



Enter video recording menu.



7



Remote controller address



Press it and input DVR NO, then it could control this DVR.



8



Auxiliary button



Enter relevant auxiliary menu.



Appendix 2. Mouse operation This file is under the condition of right hand mouse using condition.



Operation



Function



Double-click left mouse button



Double-click one of the recorded video in listing , start to replay it. Double-click replay video to enlarge or reduce interface.



Click left mouse button Click right mouse button



In preview interface ,double-click one channel to make it in full screen. Double-click again to quit full screen to multi-screen. Choose a specific function. In preview ,to show the shortcut menu. In menu ,show the shortcut menu of current menu. Add or subtract number in the number setting



Rotate mouse wheel



Switch the items in the combo box Page up or down in the list



Move mouse



Choose the widget or move the item in the widget Set the motion detect area



Drag mouse Set the cover area



71



Appendix 3.Hard disk capability calculation Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. 1、Hard disk capability There is no limit for recording machine. We recommend 120G~250G size to keep better stability. 2、Overall capability option The hard disk capability formula is: Overall capability（M）=channel number*time（hour）*capability in an hour（M/hour） The recording time formula is: Recording time（hour）= overall capability（M） Capability in an hour（M/hour）*channel number The DVR introduces the H.264 compression technology. Its dynamic range is very large so the hard disk capability calculation is based on the estimation values of each channel creating files in an hour. Example: For one piece 500G HDD,real time CIF for recording,it will keep recording for about 25 days.HDD spaces per channel is 200M/H,if 4channels real time CIF at 24hours recording uninterrupted,it can last:500G/(200M/H*24H*4ch)=26 days



Chapter 2 CAL-CMS200 instruction 2.1. Software Instruction Summary: This is a Central Control Software with powerful function and distributed architecture, integrate many windows, users, and languages, It support bidirectional talk, video conference, classic of electronic Map, alarm center, and be compatible with other extended products and single directly connected devices surveillance system as one. Its electronic map design with friendly interface, easy to operate and purview setting. This software is only for connecting different devices (DVR, DVS, etc), the manual only describe the software, for specific equipment features, please refer to related product manuals. This manual is for those who are responsible for planning, executing or reviewing the hardware installation of Network Video Surveillance software. You should have the basic operation knowledge and experience of related equipment (DVR, DVS, etc). Features: User and Purview Management 72



Support 3 level organization management, user management and purview setting Data Interface Technology Adopted All data interaction use data interface technology, and support different database sizes flexibility, such as SQL, MYSQL, XML data and so on. Support adding deviced by EXCEL . Support inputing and outputting devices using .bin file . Intelligent Video Transport Protocol Intelligent Video Transport Protocol can do Maximize the use of network bandwidth, especially on the condition of Front-end network bandwidth limited, when to assure system based on high quality image in very low network bandwidth, it can work well. Impeccable surveillance function: While supporting real-time monitor ,the software also support alarm-recording ,motion-detection recording ,video play back, and could control every channel’s recoding condition. Flexibility in adjusting the fluency or real-time of video images when real time monitoring, which can meet different users demand. The former emphasize the fluency of video images, while the latter emphasize the real-time of video images. Centralized management: The data of the whole system is centralized managed. User could process remote real time monitoring anytime anywhere using internet. High Operability Within purview limitation, users can easily control and set each monitor point through the system, it also integrates-map. High Integration The system integrates other related information, such as alarming, voice and so on. High reliability The system designs a special fault tolerance measures to assure data Integrity and system running reliability. Good Scalability The system designs for service. It has good scalability and adaptability to protect user investment maximum. Support User DIY Interface and Multi Languages Support E-map Support Simultaneous multi- Channels Real Time Playback. Support Connecting Multi Devices and View Multi Video(real time monitoring and Play back) XML Data Storage Support Multi RS Keyboard Protocols. Support Multi Alarming Device, Like CK, Vista, etc Support Multi three-dimensional positioning Speed Cameras Protocol, easy to realize three- dimensional positioning in Preview Area



2.2. Installation Instruction



73



Find “Setup.exe” in CD and double click “



” to access guide page.



Click “Next” button, shown dialog box as below:



Enter the user information , click “Next”, shown dialog box as below:



74



Click "Browser" to select setup path(default path "C:\Program Files\CAL-CMS200"),then click "Next" to select Start Menu folder as below:



Click "Next" to start setup and end setup as below:



75



Click "Finish" to end the setup, at the same time it will come up this icon “



” in the desktop.



Introduction of Basic Functions 2.3 CAL-CMS200 Operation Main Menu



2.3.1 Device Display Area: In this area, you can preview live screens by device and super account administrator setting, click device name or channel group to change channels. Users can also pull devices name or specific channel to operation area respectively. 76



2.3.2 Operation Area： You can preview live screens, and setup parameters of system configuration and video searching in this area. 2.3.3 Video Disk Status Area： It can display the rest disk spaces that store video files. 2.3.4 PTZ： Control and operate PTZ 2.3.5 Screen Mode Selection Area： Choose the number of channels accordingly and page to browse. 2.3.6 Operation Log： It will record and display any operation information when setup and operating. 2.3.7 Menu Area： Users could set single menu and sub-menu in this area, select relevant menus to operate video surveillance system in the control center. Form 3-1 Menu Configuration N o



First Menu



Second Menu



Third Menu



1



2



PTZ



3



Color Add device



Device manager 4



System



Local config



77



Modify device Delete device Import &export Connecti on test Base config



Functions & Instruction Click preview button to choose a preview mode of the screen, touring & switching among all channels and snapshot Figuretures of the screen. Shut down/open preview menu Control the speed cameras to go up, down, left, right and stop by operating panel. Adjust speed, zoom, focus, iris, auto pan, set preset and touring path. Start touring, the speed camera will tour follow the setting path. Delete the touring path. Set brightness, contract, saturation, and hue for video screen. Restore to original setting Add video surveillance devices, zone, and zone node. Set login type. Modify device name, login type, port number, user name and password, and even manufacture information. Online device are forbidden to modify Delete surveillance devices and zone table. Import &export surveillance point information. Test the network connection status of the added devices. Disk selection, logs maintenance, store catalogue selection, CAL-CMS200 language selection, device connection type set, and CAL-CMS200 start type setting.



Operating right



Admin/User



Admin/User



Admin/User



Admin/User



Alarm config



Enable audio activated by alarm. Set alarm information



Record plan



Set local disk and recording time.



DDNS server Version informatio n Device config



Manage devices together with our company’s DDNS server Display the version information Select online device and set parameter of device



Admin/User



Group



Add and delete users and its operating rights



Admin



User



Add, delete and manage users: Set user name, password and operating rights of menu



Admin



Search alarm log and operation log in set time area.



Admin/User



Select remote or local playback, search record files and playback.



Admin/User



Account



Local log



5



6



Record



Playback Decoder



Set DVR and corresponding decoder



E-map



Using E-map to visually show every cameras location and find current monitoring page directly



Advance Video touring



Preview the touring status in each channel through design the touring solutions.



TASK config



Set the sub stream, batching set the parameters of channels, set different solutions accordingly.



Admin/User



Monitor In menu area, click “Device Display Area”, it will turn to preview screen. Monitor functions: Preview, PTZ and video specification configuration. Here we introduce the monitor sub functions and its specification setting with details. 2.4. Preview In operation area, users can select preview type, or screenshot in each single channel, or shut down the preview page. Function buttons and instructions of preview in operation area shown as below. Form 4-1 Function buttons and instructions of preview No.



1



Button



Meanings



“1 screen preview” button. Click it to preview full screen for every channel。



78



No.



Button



Meanings



2



“4 screens preview” button. Click it to preview 4 screens.



3



“9 screens preview” button Click it to preview 9 screens.



4



“16 screens preview” button. Click it to preview 16 screens.



5



“25 screens preview” button. Click it to preview 25 screens.



6



“36 screens preview” button. Click it to preview 36 screens.



7



“64 screens preview” button. Click it to preview 64 screens.



8



“full screen preview” button. Click it to enter full screen interface.



Right-click Menu At operating area, user can do below operation by right-click:



Close window: close the current screen Close all windows: close all the current screens Audio: click it and hear the voices from preset screens 3D positioning: click to see 3D position. 79



Local record: click it to record at current channel and save the record at the relevant disk. Zoomed: click it to enlarge channel partially. Snapshot: Capture Features from current channel at any time and save it to relevant disk. Start talk: click it to begin talk with another side of the device. Device configuration: click it and go to device configuration interface. Color setting: click to set the color of channel. View full: click it to full display the channel. PTZ Control When speed cameras are connected with DVR, user can control it at this control center, turn up, down, left and right, stop running, adjust turning speed, zoom, focus and iris, preset and tour configuration. When user enables touring function, the speed cameras will tour according to preset. In operation area of PTZ, user can control the tour way and speed of the speed cameras. The details of buttons in operation panel show as below: Form 4-2 PTZ control panel function buttons description No.



Buttons



Meanings



1



Click



to control the direction of the speed cameras



2



Drag this pole to adjust speed rate



3



Click



to zoom in; Click



to zoom out



4



Click



to focus in; Click



to focus out



5 6



Click



to iris it; Click



Click



to begin auto scan; click



to iris out to stop auto scan.



Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position, add, delete and config preset point. Multiple preset points connected tour lines, call touring between points, the PTZ run around on the line. Add, delete, and config tour to display each surveillance point.



7 8 Color Form 4-3 color No.



Button



Meaning



1



Brightness



2



Contrast



3



Saturation



80



No.



Button



4



Meaning Hue



2.5 System settings Monitoring points manager Click “” to add zone, as shown in Figure 5.1.



Figure 5.1 Add zone here to manage surveillance points in different zones. E.g.: Add “Bin jiang” and click ok, it will show as Figure 5.2:



Figure 5.2



Click “



81



” to add device, as shown in Figure 5.3.



Figure 5.3 Device Name: Device name Login type：IP address, domain, ARSP, and cloud-add. IP Address: IP address of the device you want to access Domain: Domain name by external network such as hzjufeng.3322.org ARSP：MAC address (configuration DDNS address locally; when device and CAL-CMS200 have penetration function, add device according MAC) Cloud: serial Number of device. Vendor: the device select manufacture Port: TCP port, different manufacture has its own original TCP port. User Name: User name Password: Password Click "OK" after you have done above parameters, see below Features, you could only double click to open this device, and double click to open each channel. As shown in Figure 5.4.



82



Figure 5.4 Note: Choose only one of Domain name, IP address, ARSP, or cloud. Click IP search to search devices connected with network, and edit or login related device.



Click



to modify device, click device name to edit, as shown in Figure 5.5.



Figure 5.5 After finishing all the modifications, click "OK". Delete device 83



Choose the devices which you want to delete, then click “



”.



Note: Please make sure the device is disconnected before modifying and deleting it. Import & Export surveillance points



Click “



” to import or export surveillance points



Note：We get files with extension “bin”. Connection Test



Click



to test the connection condition.



Local Config Base Config As shown in Figure 5.6.



84



Figure 5.6 Log Maintenance: Alarm and Operation log keep days. Figureture DIR: Figureture storage location by snapshot Record DIR: Record storage location by local recording Snapshot format： BMP and JPG, default as BMP. Sync time with PC: Adjusting device and PC in order to make both at the same time Language: Choose language for CAL-CMS200 Alarm Setting



Figure 5.7 Device list: Choose 1 device to set alarms Alarm Enable: Click it to make sure all alarm functions available Alarm Prompt Sound: Select any alarm prompt sound which you like Sound File Path: Browse and choose prompt sound Auto Watch Warn: Choose it to add following channels by alarm activated Note：Please go to choose alarm type first DDNS Manage device together with DDNS servers, as shown in Figure 5.8. 85



Figure 5.8 When device and CAL-CMS200 have penetration function, add device according serial No. Record Plan Set local recording time, as shown in Figure 5.9:



86



Figure 5.9 Overwrite：When the HDD is full, cover the earliest recording. Length Time of video files. Length of alarm recording : Time of alarm video files. HDD :Choose the HDD. Click to edit planning template, As shown in Figure 5.10：



87



Figure 5.10 Configuration name, time and click “add” to add new template, then click “OK”, As shown in Figure 5.11.. Choose device name from left, and choose the channel number to configuration, choose time template for a week from Monday to Sunday, the time value will show at bottom, click “OK”.



Figure 5.11 Version Information Click to show version information of CAL-CMS200, as shown in Figure 5.12：



88



Figure 5.12 Device Config. Control device or set parameters locally. Select a device first, then set its configurations, as shown in Figure



Figure 5.13 Record



Click “



89



” to enter record interface, as shown in Figure 5.14.



Figure 5.14 Recording setting Set record length, period, type, etc. as shown in Figure 5.15.



Figure 5.15 Snapshot Storage Set pre-snapshot, snapshot type and period, as shown in Figure 5.16.



90



Figure 5.16 Alarm:



Click “



” to go into alarm configuration, as shown in Figure 5.17.



Figure 5.17 Alarm activation configuration (motion detect, video blind, video loss and alarm input/output, abnormal alarming), as shown in Figure 5.18.



91



Figure 5.18 System



Click



to go into system set interface, as shown in Figure 5.19：



92



Figure 5.19 Configuration any parameters as you like. General: Set system time, language, video standard, DVR No., auto logout. As shown in Figure 5.20.



Figure 5.20 Encode: Set DVR specifications of resolution, FPS, video quality etc. As shown in Figure 5.21.



93



Figure 5.21 Network: Set IP address, port, DNS etc., in order to remote monitor by network and mobile, as shown in Figure 5.22.



94



Figure 5.22 Net Service: Set IP filter, DDNS, Email etc., as shown in Figure5.23



Figure5.23 CAM Name: Modify camera name by your need, as shown in Figure5.24



95



Figure 5.24 PTZ configuration, Set PTZ parameters to make sure the same as speed cameras, and be able to control. As shown in Figure 5.25. 96



Figure 5.25 RS232：Set port configuration, as shown in Figure 5.26.



Figure 5.26 Management Tools



Click



97



to go into management tools interface, as shown in Figure 5.27.



Figure 5.27 HDD manage: Setting HDD type, formatting, or partitions, as shown in Figure 5.28.



Figure 5.28 Account: Modify/add/delete user, group, password, and limit users’ rights. As shown in Figure 5.29.



98



Figure 5.29 AutoMaintain: Set Auto-Reboot time and files management, as shown in Figure 5.30.



Figure 5.30 Default: Restore to factory setting, as shown in Figure 5.31.



99



Figure 5.31 Reboot the device. System upgrade: upgrade device with program, as shown in Figure 5.32.



System information



Click



to get into system information interface, as shown in Figure 5.33.



100



Figure 5.33 System info includes HDD info, Log and version info. User Add and manage local users and its purview. Group Add group, and set groups’ rights at right; choose a group and click “Delete” to delete group, as shown in Figure 5.34.



101



Figure 5.34 group User Choose a group to add users, and set its name, password; choose a user to delete or modify, as shown in Figure 5.35.



Figure 5.35 Local Log User could search menu operation log, alarm log and other logs by time, as shown in Figure 5.36：



102



Figure 5.36 2.6 Recording In menu area, click “record”, the record interface will show at operation area. Playback Playback There are 2 playback modes---Remote playback and Local playback. Remote playback support playback at device-side and local playback support playback at client-side. Figure 6.1.



103



Figure 6.1 playback mode： By file： Select playback channel, record type, period to playback. By time： Select all channels or partial channels to playback, select “synchronous” to playback all channels at the same time. Form 6-1 Functions and buttons of playback. No. Buttons Meanings 1



Click to play.



2



Click to pause.



3



Click to stop.



4



Click to slow play, there are 1,2,3,4 classes of speed.



5



Click to fast play, there are 1,2,3,4 classes of speed.



104



6



Last frame.



7



Next frame.



By file playback, as shown in Figure 6.2：



Figure 6.2 By time playback, as shown in Figure 6.3：



105



Figure 6.3 Note：Drag the time bar to playback. Download & Backup User could playback record files at set time and channels, select record fines, click "Download/Backup" and select "save directory". Note: Remote playback----Download, Local playback---Backup Select the recording file, click to download：



Pop up a window, select record format. 106



Set record dialogue： Click browse to select folder to save downloaded file. As shown in Figure 6.4



Figure 6.4 After downloading the record file, it’s forbidden to drag record file to DH_player to play, but click the button in red box instead.



Pop up the window as below, as shown in Figure 6.5：



107



Select All Files in bottom right corner, and find the downloaded file. Advanced It contains decoder, E-map, video touring and Task config, as shown in Figure 7.1.



108



Figure 7.1 Decoder It can manage and config remote decoder, as shown in Figure 7.2



109



Figure 7.2 Add decoder



Click



to add decoder, as shown in Figure 7.3:



Figure 7.3 Device Name: Name of decoder, set by yourself. 110



IP address: IP address of decoder Domain: Domain name of decoder, select it and input decoder domain name to access to Internet. ARSP: MAC address of decoder. Cloud: Serial Number of decoder. Port: TCP port, default is 34567 User Name: Login name of decoder, default is admin Password: Password of decoder, default is null. Note: support to access to decoder via IP address, domain, MAC address, or serial number. After you add decoder successfully, it will come out a "decoder" icon in this interface, left-click decoder name to drag to right, it will show a purple decoder area, and right-click this icon to edit, delete and set attribute, as shown in Figure 7.4.



Figure 7.4 Add multi decoder, and use the right ico to sort decoders in the interface, as shown in Figure 7.5.



111



Figure 7.5 Select decoder to config as below:



Figure 7.6 Right-click decoder name, and click preview to preview channel; or right-click the purple area in interface, click preview to get into preview channel. As shown in Figure 7.6 &7.7.



112



Figure 7.7 After entering preview interface, re-click “preview” to display related channel interface. Select “Synchronous window mode” in right bottom of the interface to synchronize decoder. As shown in Figure 7.8.



Figure 7.8 Configuration Click device name, and click “configuration” to get into interface as. Then select decoder and config it. Drag channel from left to digital channel area, then click “video touring”, save the config. As shown in Figure 7.9.



113



Figure 7.9 1. Reboot Click to reboot. As shown in Figure 7.10.



Figure 7.10 2. Edit Right-click decoder icon to "edit decoder", edit into interface, as shown in Figure 7.11： Modify device name, port, etc.



114



Figure 7.11 3.Delete decoder Click “Delete” to delete decoder. Layout In new-built layout, name the layout. Select and drag channel to blank area in the bottom, ad device ,then click save, as shown in Figure 7.12：



115



Figure 7.12 Touring Click “build touring solution” to build. Drag lens or layout to touring window, as shown in Figure 7.13：



116



Figure 7.13 Click to save, and you can find it at left area, as shown in Figure 7.14：



Figure 7.14 Solutions



Click one of



to name and save new solution. 7.1.5



117



Lens



Click



to edit lens：



Choose an area, you can see “add device” and “modify” neither aregray anymore, then you can click to add device or modify the device and lens. As shown in Figure 7.15.



Figure 7.15 Icon



：Add decoder；



：Save solution；



：Solution save as；



：Build touring solution；



：Edit lens E-MAP E-MAP is a plan for simulating live screen, user can use it to add & delete cameras and set e-map alarm



118



activation, see below Figure 7.16:



Figure 7.16 E-map 1. Select snapshot manage to get into interface as Figure 7.17.



Figure 7.17 119



2. Select add to enter interface, as shown in Figure 7.18：



Figure 7.18 3. Find the picture you want to set, enter the picture name, description, click OK to return to the main interface of the electronic map. Click the "picture", the mouse to select the picture on the left. Drag the picture to the right of the display area, as shown in Figure 7.19:



120



Figure 7.19 4. Click “device” to drag device's channel to the map, then the channel name will appear at the map, double-click it to name and describe it, the finished interface as Figure 7.19：



Figure 7.19 5. Cancel edit，get into e-map controlling interface. 121



In e-map display area, doubleclick the surveillance point to get preview interface, as shown in Figure 7.20:



Figure 7.20 Tour Video touring support several channels take turns to display in the same display area, including all the channels. Click “add” to design a touring solution, delete or modify the solution, as shown in Figure 7.21：



Figure 7.21 Solution name: Solution name. 122



Select channels to add in the solution, take Figure49 for an example: Touring solution named “Touring solution” will tour first channel of “test” device. Touring solution named “Touring solution” will tour first channel of “test room” device. Touring solution named “Touring solution” will tour second channel of “test room” device. Touring solution named “Touring solution” will tour fifth channel of “test room” device. Touring solution named “Touring solution” will tour seventh channel of “test room” device. The touring project is shown as Figure 7.22.



Figure 7.22 Calling Touring In software operation area, right-click in a window, choose touring solution-touring to control video tour.



Note：“Touring solution” is the name of a touring solution.



123



Task Config. Task config can set sub stream of video connecting. Batching set video connection channels, and config different solution according your need. Click to add, delete or modify a Task solution, as shown in Figure 7.23



Figure 7.23 Solution name: Task solution name. In device list, choose channels that use sub stream to add in Task solution, take Figure51 as an example, Task solution “5” will control to connect 1,3,5,7 channels of device “10.135”with sub stream.Figure 7.24 as below show the Task solution “5”：



124



Figure 7.24 Calling Task solution Right-click in left area of CAL-CMS200, select Task configuration solution, as shown in Figure 7.25:



Figure 7.25



125



Chapter 3 CALNVRView Manual 3.1 Introduction 3.1.1 Brief Introduction CALNVRView is the video surveillance application developed for Android OS. This application supports OS that is higher than 2.3 released. Manual will mainly focus on how to set up and use CALNVRView software for Android OS. 3.1.2 Main Functions 3.1.3 Main Functions:  Support Chinese, English;  View the video in real time via wife and GPRS;  Login by user or device;  Support serial number, IP address and DDNS access;  Support multi-channel switching (64 channel max);  Support video remote playback device;  Support device connection configuration parameters, modification and delete;  Support Pan, Tilt& Zoom control；  Support Snap-shot and view;  Support live video and viewing;  Support audio function;  Support real-time intercom; 3.2 Installation 3.2.1 Acquire CALNVRView Users get the software can be obtained from equipment suppliers. The software is installed directly to your phone software; click the installation, the program will be installed inside your mobile device. As downloading from android market, you can use QR scan tool, scan the QR icon, than install, the application will be installed into your mobile-phone (like 2.1a).



126



2.1a 3.3 Software operation manual 3.3.1 Interface Description After successfully installed the application into mobile-phone, just click the CALNVRView icon



“



” to run this application. Access to landing interface, user can log in by user or device



(like 3.1a).



 127



By user login (like 3.1a): User name and password are same as which user login to Cloud







Servers website (http://CALNVRView.net/) to register. Add and save the devices on server and get the device list after login. Or click the “Add” icon on the interface to add the device for user. By device login (like 3.1b): Click “Serial Number” or “Address” on the “Device List” at the top left, to access “Device Detail”. Can be entered manually, you also can click “Search” to add the devices within LAN (like 3.1c,3.1d,3.1e );



3.1c 3.1d 3.1e Connection: By serial number or address; Serial number: User can get the serial number from the system information serial-number on PC or the label of devices. User can also click QR scan to access; Address: DVR/IPC IP address or DDNS; TCP port: User can acquire the TCP port in the setting information of the device. The default port is 34567; User name: The default user name of terminal device is “admin”; Password: The default password of terminal device is blank, match with user name. After filling out the settings, please click “Save” button to save the information. Click “Back” return to the “Device List”, you will see other related device name, serial number, address etc.



Click “



” icon on right to change the information of devices (like 3.1f); Keep pressing the device



name to get out delete icon, to delete the device (like 3.1g).



128



3.1f



3.1g



3.3.2 Live Preview In the upper left corner of the main menu click on “Live Preview” to return to the video player interface(like 3.2a):



3.2a Instructions of the functions on live preview interface as below: Function Key Description Back to main menu Full screen



129



Channel/ Group selecting Play/ Stop Snapshot Video Records Voice Remote Playback Intercom



Control the directions of the camera



Zoom in / Zoom out Focal length control Aperture control 3.3.3 Main Menu Instruction



Access to the main menu by clicking “



”, and see the corresponding operation options,



including device list, photos, local video, options and about etc (like 3.3a):



3.3a 130



 







Device List: Device directory display area Local Video: If CALNVRView has record function, after clicking video records, you will see the detail information about the records. The name of the record file will be generated by system default according to recording time. Local Setting: You can check the version of the application (like 3.3b):



3.3b  Logout: Click “Logout” turn back to login interface. PTZ Control Left slipping “” to turn to “PTZ Control” (like 3.4a)



3.4a Function keys of PTZ Control as below:



  131



：Control PTZ direction; ：Zoom in or Zoom out;







：Focal distance control;







：Aperture control.



3.3.4 Local video These videos will be saved on the phone after recording the videos. Steps as below: [Note]: If the mobile phone has no memory card, video features will not work properly.  Play Video:







Click “



” to enter the main menu, select “local video” to enter “local video” list







interface (like 3.5a); Click on a certain video record, for example 1387349183033.avi, to view this video record.



3.5a 



3.5b



Delete:



 



Click “



” to access the main menu interface, select “record” to access “record”



list interface, like 3.5a; Click “Edit”, select the record which need to be deleted(like 3.5b), click “Delete” to delete the record; Click “Cancel” and back to “Local Playback”; Click “Back” to the main menu;



  [ATTENTION] 1. Recording all the steps in the video operation, the “Finish” button can be terminated, canceled



132



and takes you back to the previous n interface. 2. Must ensure that there is a video in order to check the video. If there is no video, then will not find the video in the “Video” list. 3.4 Photo The photos are the snap-shot when viewing the cameras which saved on the album. You also can check the batch save and delete etc. The steps are the same as 3.4. 3.5 Remote Playback The application can visit the device remotely, collect the records saved from device, to remote playback. Select time, device and channel, then click “Search” and choose any record to playback (like 3.7a).



3.7a 3.6 Intercom You can select the device for real-time bidirectional intercom. Click “ “



” and active as



”. At this point of the mobile client device can receive speech, and sound equipment pass



over the mobile client can hear, bidirectional intercom clients and devices. Click the button again to end the intercom state. 3.7 Switching language When you switch the language on your phone, the language of the application will be changed as well. Fox example, it’s switched to English on your phone; the language of the application will be switched to English as well.



133



Chapter 4



Remote Cloud Operating Instructions



Log http://calnvrview.net/, and register a user name, if it is the first landing Select download web control button to download the latest controls.



Click “



Click “



”, as shown in below, Click "Run" option by default prompts to install controls.



” to enter the interface as shown：



Enter your user name, password, e-mail and other information, click on "OK", pop out the following information. 134



After successful registration, automatic return Home Login.



Login by user



Enter the correct user name, password, authentication code, click on the "Login" button to enter the page, select "Device Manager" → "Add" and enter the following pages



Device serial number: Device Configuration → System Information → Information → version serial number Device Name: Any name Press the device login



135



Click on "My Device" to display the list of devices.



Click "Device Manager" to enter the following page, you can modify and delete the device.



136



AppendixⅠ Remote controller operation



Serial



Name



Function



Multi-window



Same function as Multi-window button in the front



button



panel



2



Numeric button



Code input/number input/channel switch



3



【Esc】



Same function as【Esc】button in the front panel



4



Direction button



Same function as direction button in the front panel



5



Record control



Control the record



6



Record mode



Same function as “Record mode”



7



ADD



Input the number of DVR to control it



8



FN



Assistant function



number 1



137



AppendixⅡ Mouse operation *Take right hand as an example The mouse in USB connection is supported. Operation



Function Double click one item in the file list to playback the video



Double left click



Double click the playback video to zoom in or out the screen Double click the channel to make it full screen display double click again to resume the multi-window display



Left click Right click



Choose the according function in the menu Pop desktop shortcut menu in preview state Current shortcut menu in the menu Add or subtract number in the number setting



Press middle button



Switch the items in the combo box Page up or down in the list



Move mouse Drag mouse



Choose the widget or move the item in the widget Set the motion detect area Set the cover area



138



AppendixⅢ



Hard disk capability calculation



Make sure the hard disk installed to the DVR for the first time. Pay attention to the IDE hard disk lines connection. a)



Hard disk capability



There is no limit for recording machine. We recommend 120G~250G size to keep better stability. b)



Overall capability option



The hard disk capability formula is: Overall capability（M）=channel number*time（hour）*capability in an hour（M/hour） The recording time formula is: Recording time（hour）=



overall capability（M）



Capability in an hour（M/hour）*channel number The DVR introduces the H.264 compression technology. Its dynamic range is very large so the hard disk capability calculation is based on the estimation values of each channel creating files in an hour. Example: For one piece 500G HDD, real time CIF for recording, it will keep recording for about 25 days.HDD spaces per channel is 200M/H, If 4channels real time CIF at 24hours recording uninterrupted, it can last: 500G/(200M/H*24H*4ch)=26 days



139



1 SATA 4-/8-/16- ch 720P AHD DVR



Model No. System



CADVR-1004HD Operation System



Linux



Video compression



H.264 （High Profile） 4*AHD-M



8*AHD-M



16*AHD-M



Decode



4*AHD-M



8*AHD-M



1*AHD-M



Analog: 4*720P; 4*AHDL; Hybrid :4*AHDM+4*720P; Network: 2*1080P+2*720P; 8*720P；



Analog：8*AHD-M; 8*AHD-L; Hybrid：4*AHD-M （Analog）+4*720P （Network）; 8*AHD-M（Analog） +8*720P（Network）; Network： 1*1080P+8*720P; 4*1080P; 20*960H



Analog：16*AHD-M; 8*AHD-M;16*AHD-L; Hybrid：4*AHD-M （Analog）+4*720P （Network）; 8*AHD-M（Analog） +8*720P（Network）; Network： 1*1080P+8*720P; 4*1080P; 20* 960H



Multi-mode input



Recording and playback



Storage and backup



Audio compression



G.711A



Intercom



Support



Recod mode



Manual > Alarm> Motion detection > Timing



playback



4*720P@25fps



8*720P@25fps



1*realtime+3*not real time



Space occupation



960H：12~20G / day / ch 720P：20G~30G / day / ch audio：691.2M / day / ch



backup



Network backup、USB HDD、USB writer、SATA writer



Video input



4*BNC



Video output



Interface



CADVR-1016HD



Encode



Video



Audio



CADVR-1008HD



8*BNC



16* BNC



1*VGA，1* HDMI



Audio input



4* RCA



2*RCA



2* RCA



Audio putput



1* RCA



1*RCA



1*RCA



Alarm input



No



Alarm output



No



Internet interface



RJ45 10M/100M adaptive Ethernet port



PTZ



1*RS485；support multiple PTZ protocol



140



USB



2*USB interface



Hard disk



1*SATA（max 4 TB）



Wreless



3G、WIFI （expand via USB）



Power



12V/2A



Dimension



255mm（length）x236mm(width)x44mm(height)



others



2 SATA 4-/8-/16-CH 720P AHD DVR



型号



System



CADVR-2004HD



Operation System Video compression



Storage and backup



141



Linux H.264 （High Profile） 4*AHD-M



8*AHD-M



16*AHD-M



Decode



4*AHD-M



8*AHD-M



1*AHD-M



Multi-mode input



Recording and playback



CADVR-2016HD



Encode



Video



Audio



CADVR-2008HD



Analog：4*720P; 4*AHDL； Hybrid ： 4*AHD-M +4*720P； Network ： 2*1080P+2*720P; 8*720P；



Analog ： 8*AHD-M; 8*AHD-L； Hybrid： 4*AHD-M （ Analog ） +4*720P（Network）; 8*AHD-M （ Analog ） +8*720P（Network）； Network ： 1*1080P+8*720P ； 4*1080P； 20*960H



Analog ： 16*AHD-M; 8*AHD-M；16*AHD-L； Hybrid ： 4*AHD-M （ Analog ） +4*720P （Network）; 8*AHD-M （ Analog ） +8*720P（Network）； Network ： 1*1080P+8*720P ； 4*1080P； 20*960H



Audio compression



G.711A



Intercom



Support



Recod mode



Manual > Alarm> Motion detection > Timing



playback



4*720P@25fps



8*720P@25fps



1*实时+3*非实时



Space occupation



960H：12~20G / day / ch 720P：20G~30G / day / ch audio：691.2M / day / ch



backup



Network backup、USB HDD、USB writer、SATA writer



Video input



4*BNC



Video output



Interface



8*BNC



16*BNC



1* VGA,1*HDMI



Audio input



4*RCA



6*RCA



6*RCA



Audio putput



1*RCA



1*RCA



1*RCA



Alarm input



4



Alarm output



1



Internet interface



RJ45 10M/100M adaptive Ethernet port



PTZ



1*RS485；support multiple PTZ protocol



USB



2*USB interface



Hard disk



2*SATA（max 4 TB）



Wreless



3G、WIFI （expand via USB）



Power



12V/4A



Dimension



350mm （length）x 296mm （width） x 44mm （height）



others



142