7 0 1 MB
Multiflo® CF-60HV Dewatering Pump Unit Technical Specifications
Minerals Features • Solids handling dewatering pump • Close coupled pump assembly ensuring accurate pump alignment • Auto vacuum pump priming system • Robust pump unit base construction with inbuilt baffled fuel cell • Pump unit base designed for various mounting options • Engine canopy • Lift Points (2) • Two-pack epoxy paint system • Comprehensive installation, operations and spare parts manuals
High volume flow at low heads The Weir Minerals Multiflo® CF units are a range of cost effective, general purpose dewatering pump units. The diesel driven CF range of auto vacuum primed pump units has been designed and built to simplify both the operation and maintenance of the unit. The CF range has been developed to operate in mining, quarrying, industrial, water transfer and environmental water management applications. The Multiflo® model CF-60HV is a close coupled, solids handling dewatering pump suited to high volume flow at low heads while maintaining high efficiency. The Multiflo® CF-60HV unit provides a wide range of standard inclusions and a comprehensive selection of optional features to suit your dewatering needs.
Above: Multiflo® 60HV stainless steel bare shaft pump
Standard Inclusions • Stainless steel bare shaft pump • Caterpillar** C7.1 ACERT diesel engine • Kensho** electronic control panel • Non return valve fitted to pump discharge • Auto vacuum priming system • Exhaust system heat shielding • Starter motor and battery isolators • Low flow protection
Multiflo® CF-60HV operating curve
Standard options • Cummins** QSB6.7 diesel engine • Galvanised suction strainer • Hydrau-Flo® fast fill non pressurised fuel system • Full stainless steel suction and discharge arrangements
• Linatex® suction hose and boom kit • Booster arrangement • Suction and discharge pressure gauges • Telemetry • Auto start/stop • Jump start terminals • Fire extinguisher • Highwall float fuelling • LED work lights (2)
Technical data
• LED flashing amber light • Engine oil drain • Trailer • High lift skid • Pontoon
Dry Weight
3650kg
Passage Size
26mm
Shaft Sealing
Gland packing
Engine Type
Caterpillar** C7.1 ACERT
Engine Power Non-standard options (available on request)
186kW
Material - Casing and Impeller
• Bunded fuel base • Sound attenuated canopy
AS 2074 H7A Cast Stainless Steel
Material - Shaft
E05 - 1045 Carbon Steel
Material - Shaft Sleeve
C23 – 316 Stainless Steel
Unit connections
• Additional customised options
Suction DN
250mm
Flange Specification
Table E
Discharge 200mm
Flange Specification
Table E
2116
DN
3218
Weir Minerals [email protected]
www.minerals.weir
1853
Copyright © 2018, Weir Minerals Australia Ltd. All rights reserved. MULTIFLO and HYDRAU-FLO are trademarks and/or registered trademarks of Weir Minerals Australia Ltd; LINATEX is a trademark and/or registered trademark of Linatex Limited; WEIR and WEIR (logo) are trademarks and/or registered trademarks of Weir Engineering Services Ltd. Certain features of the technology MASS: 2937.3 kg granted patents in the name of The Weir Group PLC and/or one of featured in this publication may be protected by pending and DO NOT SCALE IF IN DOUBTand - ASK KENSHO are not trademarks belonging to any company ASSEMBLY its subsidiaries. ** CATERPILLAR, CUMMINS forming part of The CF-60HV C7.1MECH TOP LEVEL Weir Group PLC. WMD0758/062018
NOTE: FOR DRAWING, FABRICATION AND ASSEMBLY STANDARDS REFER TO WEIR MINERALS MULTIFLO ENGINEERING DEPARTMENT STANDARDS AND PROCEDURES. -
-
-
-
-
-
-
-
-
-
00 No.
APPROVED FOR CONSTRUCTION Description
-
-
-
WELD CAT.
-
-
-
-
FINISH CODE
-
-
-
-
-
-
-
-
-
-
-
-
AS PER APPROVALS
DWN CHK APPD
DATE
Copyright © Weir Minerals Australia Ltd. 2018 Weir Minerals Austalia Ltd. ("the Company") is the owner of the copyright and all confidential information in this drawing. The drawing must not be copied in whole or in part, in any form or by any means, and the information in it must not be disclosed to any person, or used for any purpose other than the specific purpose for which it has been provided, without the prior written consent of the Company. ®
MULTIFLO Mine Dewatering Solutions HYDRAU-FLO Safety Solutions for Liquid Filling ASPIR Coal Processing Solutions ®
®
MINE DEWATERING SOLUTIONS 15 Dacmar Road Coolum Beach, QLD 4573 Australia
Telephone: +617 5449 3000 Facsimile: +617 5446 4304
Email: [email protected] Web: www.weirminerals.com
SCALE
0.05 : 1 U.N.O.
DESIGN
J.A
11.07.16
DRAWN
A.R
18.05.17
CHECK
-
-
APPD
-
-
SHEET 1 OF 1
3rd ANGLE PROJECTION U.N.O.
A3
DRAWING STATUS
WORK IN PROGRESS Drawing Number
MF269039
REV
P0