SIUI General Probe [PDF]

Citation preview

About SIUI SIUI product adopts:



Shantou Institute of Ultrasonic Instruments Co.,Ltd. (SIUI) is a shareholding key high-tech enterprise in NDT industry. We are specialized in R&D, manufacture and distribution of ultrasonic testing equipments, ultrasonic probes and accessories.



●



Highly advanced manufacturing facility



●



Rigorous production environment control



●



Strict product testing and inspection equipment



With an aim to reach advanced international level, SIUI strictly executes every step of development, purchase, production, sales and after sales service according to related international and national quality standards.



With more than 30 years’ professional UT experience, SIUI manufactures ultrasonic probes for applications as diverse as flaw detection, thickness gauging, materials research etc. SIUI can provide more than 500 types of probes and we also accepts customization.



International Advanced SMT Production Line



Environmental Chamber



World-leading Probe Inspection System



Mid Frequency Series



Normal Probe There are three series of normal probes for your selection: 1.Mid Frequency Series Medium pulse, medium damping — best combination of gain and resolution Medium Bandwidth — typical -6dB bandwidth range 30%~50% 2.Wide Frequency Series(Heavy Damping) Wide Bandwidth — typical -6dB bandwidth range 50%~100% 3.Wide Frequency Series High signal-to-noise in composite materials Short pulse, Higher resolution than Mid Frequency series Wide Bandwidth — typical -6dB bandwidth range 60%~120% Application: Mainly used for testing defects parallel to or slightly tilted against the test surface (e.g. steel plate)



Ordering Information:



Wide Frequency Series



P2-20L P: Series Code 2: Frequency



* All probes are EN-12668-2 compliant.



Wide Frequency Series (Heavy Damping)



L: Connector Type 20: Crystal dimension Φ20



* LEMO 01 is only available for those crystal size ≥ 24mm . * Probes with crystal size 6mm are only compatible with LEMO 00 and Microdot.



Replaceable Membrane Normal Probe



Mid Frequency Series



There are two series of Replaceable Membrane Normal probes for your selection: 1.Mid Frequency Series Medium Pulse and Medium Damping — perfect combination of gain and resolution Medium Bandwidth — typical -6dB bandwidth range 30%~50% 2.Wide Frequency Series Higher Penetration, Higher Signal-to-noise, Higher Resolution, Higher Sensitivity than Mid Freq Series Medium Bandwidth — typical -6dB bandwidth range 60%~120%



Wide Frequency Series Application: Mainly used for inspecting container flaws as well as flaws parallel to the inspected surface,applicable for checking coarse and slightly-curved surfaced objects. Ordering Information:



RP2-25L RP: Series Code 2: Frequency



L: Connector Type 25: Crystal dimension Φ25



* LEMO 01 is only available for those crystal size ≥ 24mm .



Replaceable Delay Line Normal Probe



Surface Wave Probe



Application: Mainly used for inspecting flaws parallel to/ near to the inspected object surface, applicable for inspected objects with sharp edge. If the delay line is made of high-temperature material, it can also inspect high-temperature objects.



Application: Mainly used for surface defect testing and also for surface crack depth testing. D Series



Ordering Information:



AS2.5-66L



Ordering Information: DM Series



D2.5-10L D: Series Code 2.5: Frequency Mid Frequency Series



AS: Series Code 2.5: Frequency



L: Connector Type 10: Crystal dimension Φ10 Wide Frequency Series



* 7.5/10Mhz is also available, please refer to Thickness Gauge Probe series.



L: Connector Type 66: Crystal dimension 6×6



Angle Probe ( Transverse Wave ) There are two series of Transverse Angle probes for your selection:



Narrow Frequency Series



1.Narrow Frequency Series General purpose, recommended for the majority of applications Medium Bandwidth — typical -6dB bandwidth range from 20%~30% 2.Mid Frequency Series Medium Pulse, Medium Damping — best combination of gain and resolution Medium Bandwidth — typical -6dB bandwidth range from 30%~50% Mid Frequency Series



Ordering Information:



AFN4-89-60L AFN: Series Code 4: Frequency



L: Connector Type 60: Angle



89: Crystal dimension 8×9



* LEMO 01 is only available for crystal size 20 20mm and 20 22 mm. * Probes with crystal size 6 6mm are only compatible with LEMO 00 and Microdot.



Angle Probe ( Longitudinal Wave ) There are two series of Longitudinal Angle probes for your selection:



Narrow Frequency Series



1.Narrow Frequency Series General purpose, recommended for the majority of applications Medium Bandwidth — typical -6dB bandwidth range from 20%~30% 2.Mid Frequency Series Medium Pulse, Medium Damping — best combination of gain and resolution Medium Bandwidth — typical -6dB bandwidth range from 30%~50% Mid Frequency Series



Ordering Information:



LFP2-1010-70L LFP: Series Code 2: Frequency



L: Connector Type 70: Angle



1010: Crystal Dimension 10×10 * LEMO 01 is only available for crystal size 20 20mm and 20 22mm . * Probes with crystal size 6 6mm are only compatible with LEMO 00 and Microdot.



Angle Probe With Replaceable Wedge



Mid Frequency Series (Transverse Wave ADP and Longitudinal Wave LDP)



There are two Frequency types for your selection: 1.Mid Frequency Series General purpose, recommended for most applications Medium Pulse and Medium Damping — perfect combination of gain and resolution Medium Bandwidth — typical -6dB bandwidth range from 30%~50% 2.Wide Frequency Series Gain is usually higher than Mid Freq Series Wide Bandwidth — typical -6dB bandwidth range from 60%~120%



Wide Frequency Series (Transverse Wave ADM and Longitudinal Wave LDM)



Ordering Information:



ADP2-1616-70L ADP: Series Code 2: Frequency



L: Connector Type 70: Angle



1616:Crystal Dimension 16×16 * Crystal size unit inch is also available: 1/4" , 3 / 8" , 1 / 2" . * LEMO 01 is only available for those crystal size ≥ 24mm . * Probes with crystal size 6mm are only compatible with LEMO 00 and Microdot.



Dual-Element Angle Probe Application: Mainly used for testing defects tilted against the test surface or perpendicular to the test surface



Ordering Information:



1.For TRANSVERSE WAVE type: Mainly used for testing small near-surface defects, thin wall pipe, and ring-type work piece. 2.For LONGITUDINAL WAVE type: Mainly used for macro-crystal welding inspection, attenuating material and Austenitie welding. For 70 degree angle, it can be applied for creeping wave.



TRT: Series Code



TRANSVERSE WAVE angle probes option: Mid Frequency Series TRT



Wide Frequency Series TRTM



TRT2-1010-70L 2: Frequency 1010: Crystal Dimension 10×10



LONGITUDINAL WAVE angle probe option: Mid Frequency Series TRL



Wide Frequency Series TRLM



L: Connector Type 70: Angle



TR Probe



Thickness Gauge Probe



Application: Mainly used for testing defects parallel to or slightly tilted against the test surface (e.g. steel plate); Much more appropriate for detecting near surface flaws than normal probes.



Application: Mainly used for measuring work piece thickness.



High Temperature Probe (Up to 200℃)



Ordering Information:



TG2-12L L: Connector Type



TG: Series Code



Ordering Information:



2: Frequency



12: Crystal Dimension Φ12



Twin crystal ( H for High temperature )



TR2.5-14-30L TR: Series Code 2.5: Frequency



L: Connector



Type



30: Focal Length



Twin Crystal Probe



Single crystal ( N for normal probe, which also be used for flaw detectors )



14: Crystal dimension Φ14



Single crystal ( D for delay line probe, wide frequency series )



Delay Line Probe * Side connector is available. * (Please specify when order)



* All crystal sizes is for twin-element crystals.



Spot-Weld Probe



TOFD Probe



Application: Straight-beam probe with soft protective membrane, using water column as water delay coupling, so as to achieve optimal coupling between the probe and spot weld surface. Especially good for spot-weld testing on thin plates of automotive industry.



TOFD transducers and wedges generate refracted longitudinal waves in steel for use in applications involving crack sizing by means of the Time of Flight Diffraction technique. Application: Weld detection for plate, boiler, pressure pipe and pressure vessel etc..



Ordering Information: Ordering Information:



SW15-3L SW: Series Code 15: Frequency



T2.5-10L



L: Connector Type 3: Crystal dimension Φ3



T: Series Code 2.5: Frequency



L: Connector Type 10: Crystal dimension Φ10



Immersion Probe There are two series of Immersion probes for your selection: 1.Narrow Frequency Series General purpose, recommended for the majority of applications Medium Bandwidth — typical -6dB bandwidth range from 20%~30% 2.Wide Frequency Series High signal-to-noise in composite materials Short Pulse, Higher resolution than Narrow Frequency series Wide Bandwidth — typical -6dB bandwidth range 60%~120% Application: Mainly used in situations where the work piece and the probe do not contact directly. It is suitable for testing work piece with rough surface and automatic testing required to increase scanning speed and shorten testing time.



Ordering Information:



INM4-10-20L INM: Series Code 4: Frequency 10: Crystal dimension Φ10



L: Connector Type 20: Focal Length



Narrow Frequency Series



Wide Frequency Series



Immersion Probe without focusing



Immersion Probe without focusing



Immersion Probe with Line Focusing



Immersion Probe with Line Focusing



Immersion Probe with Point Focusing



Immersion Probe with Point Focusing



Variable-angle Probe Application: The reflection angle can be adjusted to meet different requirements.



Custom Ultrasonic Probes



Ordering Information:



AV2.5-1016L AV: Series Code 2.5: Frequency



L: Connector Type 1016: Crystal dimension 10×16



SIUI can provide custom ultrasonic probes according to specific requirement.



There are different kinds of cable connectors for your selection. Such as BNC, LEMO 01, LEMO 00, Microdot, UHF etc.



Calibration Block We can also provide various calibration blocks for ultrasonic purpose.



Calibration Block No.1 (V1)



Calibration Block No.2 (V2) (Thickness 12.5mm Hole diameter φ5mm)



Step Block [Width:40mm;7 steps(each 40mm); Total length:280mm;Height:3/12/24/30/36/42/48mm]



Step Block [Width:40mm;7 steps(each 40mm); Total length:280mm;Height:1/1.5/2/4/6/8/10mm]



V1 Specification



V2 Specification