6 0 6 KB
TECHNICAL PARTICULARS AND GUARANTEES TPG 8A : BUSBAR AND BAY CONDUCTOR NO.
DESCRIPTION
UNIT
REQUIRED
PROPOSED AND GUARANTEE
1.
Manufacturer
-
submitted
2.
Standard
-
SPLN or International Standard
3.
Standard of material
-
4.
Number of phases
-
5.
Rated voltage
kV
6.
Rated current
A
850 mm2 >2000
660 mm2 >1700
7.
Nominal cross section
mm2
850 mm2
660 mm2
8.
Short time current, 3 sec.
3 170
kA
40
kAp
100
9.
Peak asym. short circuit current
10.
Calculated resistivity at 20 °C (for each type of conductor)
Ohm mm 2/m
11.
Conductor material (for detail see Bill of Quantity)
-
12.
Type of conductor
-
Stranded
13.
Single or bundle conductor arrangement
-
Single or Bundle
14.
Spacing between conductor
m
as required
15.
Span length of busbar (max)
m
as required
Al / Steel T-AAAC (TAL)
Name of Bidder : Signed of Bidder :
Page 1 of 2
TECHNICAL PARTICULARS AND GUARANTEES TPG 8A : BUSBAR AND BAY CONDUCTOR NO. 16.
DESCRIPTION Mechanical characteristics : a) Rated cantilever strength b) Min. breaking load c) Min. ultimate tensile load d) Max. permissible static & dynamic pull e) Max. electromechanical failing load
UNIT
REQUIRED
N N N N N
submitted submitted submitted submitted submitted
17.
Elastic elongation coefficient :
kg/mm2
submitted
18.
Thermal expansion coefficient :
/deg.C
submitted
19.
Max. thermal stress due to short circuit current
N
submitted
20.
Weight per meter
kg
submitted
21.
Mechanical tests acc. IEC 60209 / 60207
-
submitted
22.
Galvanizing tests acc. IEC 60209
-
submitted
23.
Resistivity tests acc. IEC 60209 / 60207
-
submitted
PROPOSED AND GUARANTEE
Name of Bidder : Signed of Bidder :
Page 2 of 2