4 0 7 MB
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
440 views Now 1 0 Download
3
of 63 RELATED TITLES
Search document
Allengers 325 RF - Installation and Service Manual
Uploaded by leopa78 on Nov 15, 2018 rx allingers Full description
Save
1
0
Embed
Share
Print
Download Now
LightSpeed 2.X System Service…
3
of 63
Compressor[1]
SIEMENS HEALTHCARE LT
Search document
AN ISO 9001: 2008 & 13485
Allengers 325 (X-RAY GENERATOR)
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
1/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
INSTALLATION/SERVICE MANU
Our EU Authorised J 58, Avenue d
Medical Systems Ltd. S.C.O. 212-214, SEC. 34-A, CHANDIGARH (INDIA) TEL.: +91-172-3012287, 3012285, FAX: +91-172-2621912 E-mail: [email protected] Website: www.allengers.com
Te Fa E-m
We Aim For Your Deligh
Related titles
PREFACE LightSpeed 2.X System Service…
Compressor[1] SIEMENS 325-525Manual Differentiating This Installation and Service of Allengers N161 325 HEALTHCARE LTD Between Nema…
X-Ra covers all aspects of Installation and Servicing of the Machine.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
2/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search checkpoin The Manual covers the Installation Procedure & Diagram, its Explanation, Calibration Procedure, Trouble Sh Download Now Search document major parts list. 3 of 63
Although all efforts have been made to keep this Manual understand, in case of any clarification, Allengers Internationa Care Cell can be contacted for more detailed information on any
It is assumed that anyone referring to this manual and attemptin the X-Ray Machine has relevant Technical background and service this Equipment.
This Manual is company’s confidential document and is m circulated only to company’s Service Engineers and authoriz Dealers.
Photocopying and free circulation of this document is prohibited.
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
3/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
CONTENTS 1. System Overview………………………………………………
1.1 Introduction………………………………………………… 1.2 Technical Specifications…………………………………… 1.3 Description of Control……………………………………… 2. Packing List…………………………………………………… 3. Unpacking Instructions……………………………………… 4. Infrastructural Requirements for Installation………………
4.1 Supply and Wiring Requirements…………………………… 4.2 Earthing Requirement……………………………………… 4.3 Suggested Room Plan……………………………………… 4.4 Air Conditioning…………………………………………… 4.5 Environmental Conditions………………………………… 4.6 Room Layout Approval from BARC/AERB………………
Related titles
5. Installation Procedure…………………………………………
5.1 Inter Connections of Various Assemblies…………………… 5.2 Assembly Procedure………………………………………… 5.3 Installation Checkpoints…………………………………… LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
Differentiating Between Nema…
N161
6. Circuit Diagram & Circuit Explanation…………………… 7 C lib
ti
& T ti
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
4/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
7. Calibration & Testing…..…………………………………… Search 7.1 Energizing the Equipment…………………………………… 7.2 Carrying out 3Preliminary Tests……………………………… of 63 Download Now Search document 7.3 Calibrating the Equipment………………………………… 7.4 Procedure for carrying out QA Tests as per Regulatory Boa 8. Troubleshooting……………………………………………… 9. Post Installation Instructions………………………………… Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
10. Dark Room Procedures & X-Ray Film Processing………… 11. Radiation Monitoring & Protection…………….………… 12. Preventive Maintenance Procedure………………………… 13. Preventive Maintenance Check Points………………………
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
Differentiating N161 Checked By____________ Between Nema…
You're Reading a Preview
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
5/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
You re Reading a Preview Upload your documents to download.
Search
Download Now
3
OR Search document
of 63
Become a Scribd member for full access. Your first 30 days are free. Continue for Free
Allengers 325Date: Installation/Service Manual Rev. ‘0’ Eff. 12.02.2011
Related titles
LightSpeed 2.X System Service…
This machine is type approved for Mechanical, Electrical & Radiation safety Compressor[1] SIEMENS 325-525 Differentiating N161 regulatory boards:HEALTHCARE LTD Between Nema…
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
6/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
PRODUCT APPROVALS Download Now
3
of 63
Search document
Approved for meeting Radiation Standards by Atomic Energy Re Board (AERB)
Approved for meeting Mechan Electrical by B You're Safety Reading aStandards Preview Indian Standards (BIS) Upload your documents to download. OR
CE
Certified;
Approved
Become a Scribd member for full access. Your first 30Safety days are free. International Standards
for
Continue for Free
SYSTEM APPROVALS
Related titles
LightSpeed 2.X System Service…
Compressor[1]
ISO 9001:2008 & ISO 13485:2003 A for meeting Quality Management Requirements SIEMENS HEALTHCARE LTD
325-525
Differentiating Between Nema…
N161
________________________ ______________________________________ ____________________________________________________ __________ Allengers 325 Installation/Service Manual
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
7/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11 Search
Download Now
3
of 63
Search document
System O
1. SYSTEM OVERVIEW 1.1 INTRODUCTION Allengers 325 is an all-purpose high power Diagnostic X-Ray Generator, which cate the requirements of generalized and specialized Radiography when used with Ma motorized table. This generator is also available in various options like Fluoro/Spot capabilities. This can also be made available for R+F Tables having I.I. T.V. System.
This unit incorporates State - of – the- Art technology and is designed keeping in m diverse requirements of the Radiologists. It is a Solid State Silicon Rectified Un Pulse) and consists of Control Panel, High Voltage Tank, High Voltage Cables & Tube Head with a collimator.
You're Reading a Preview Related titles
This unit can be supplied in different combinations of Tube Stands, Tables & Vertica your documents to download. Stand as per individual customerUpload requirement. OR This machine is Type Approved for Electrical and Mechanical Safety Standards and
Radiation Safety (vide IS: 7620) from the Atomic Energy Regulatory Board (AERB
Become a Scribd full access. Your of India, thus making it entirely safe from the member Radiationfor Hazards. first 30 days are free.
Continue for Free LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
8/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
You're reading a preview
Unlock full access (pages 7-12) by uploading documents or with a 30 Day Free Trial Continue for Free
Related titles
15.
Radiographic Major KVP Selection Switch:
Used to adjust Radiographic KVP in coarse steps. LightSpeed 2.X System Service…
Compressor[1]
16.
SIEMENS HEALTHCARE LTD
325-525
Differentiating Between Nema…
N161
Voltmeter: 230 V.A.C.:
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
9/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search Input Voltage to the machine. Indicates
Download Now
3
17.
of 63
Search document
Fluoro mA Digital Display:
Displays Fluoroscopic mA. This function works only in machin Fluoroscopy. In Radiography machines, display remains blank.
You're Reading a Preview
Upload your documents to download. mAs Digital Display:
18.
OR
Displays mAs as per mA selected fromforTechnic selector Become a Scribd member full access. Your and Ti Timer switch. first 30 days are free.
Continue for Free Radiographic KVP Display:
19.
Displays active Radiographic KVP.
20.
mA Meter:
Indicates Tube Current during exposure. Exposure
HAND SWITCH
Related titles
Ready
A.
This is used to press Ready switch and Exposure switch using retractable ty
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11 LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
10/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
2. PACKING LIST Sr. No.
Items
Box Si (L
1
Control Panel
32
3
H.V. Tank (Single Tube operation)
25
H.V. Tank (Double Tube Operation)
30
4
Tube Head
16
5
(H.V. Cables + Collimator + Accessories)*
26.5
* No separate box provided in case Allpose / Multipose / Fl given in combination You're Reading a Preview Upload your documents to download.
Above is the standard packing list of Allengers-325. Actual conte OR may vary dependingBecome upon the combination a Scribd member forordered. full access. Your first 30 days are free.
Related titles
Continue for Free
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
11/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
Unpacking Inst
3. UNPACKING INSTRUCTIONS Optimum care is taken while packing the machine so that the machine must reach to destination without any scratches and must be free from any transportation damag machine is first packed in Polythene sheet & then further packing is done eithe foam/thermocole sheet. The outer carton could be of cardboard box or wooden ply p The wooden boxes are packed with the nails and metallic strips wound with the n bolts. The Service Engineer should study the following safety points before installing the m at the customer’s place:
Related titles Utmost care should be taken while unpacking the boxes.
Always make sure that while unpacking the boxes the items contained in them
•
get damaged.
•
LightSpeed 2.X System Service…
removing the screws, bolts or nuts from the boxes, make sure While instrument used for removing the screws, bolts or nuts do not penetrate in the subsequently damage the contents the box. a Preview You'reofReading
Compressor[1]
•
SIEMENS 325-525 Differentiating N161 HEALTHCARE LTD Between Nema… Extra Care should be Upload taken your whiledocuments opening the heavier items as any to download.
carelessness can cause injury to the person handling the item. OR
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
12/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
OR
Follow the procedure below to open the packing: Search Become a Scribd member for full access.Your (i)
Download Now(ii) (iii)
Remove the metallic strips byfirst opening the are nutsfree. and bolts with the spanners 30 days Remove the wooden packing from the sides by removing Care 3 document the nails. of 63 Search taken so that the contents of theContinue box are not accidentally. forhit Free Remove the thermocole packed material from the cardboard boxes after re the packing tapes used to close the boxes (wherever applicable) and then thermocole packing sheet and polythene sheet by removing packing tape.
The unpacked mustany notscratches be kept on on the theparts floorand andtocan bethem keptclean. on theDopackin removed earlierparts to avoid keep not to parts with dirty hands or rub them with a piece of cloth to avoid any dirt marks on the Check the contents of Packing as per Packing List along with the machine and rep damages or short shipments if any in prescribed format to Head Office. Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
You're reading a preview
Unlock full access (pages 16-19) by uploading documents or with a 30 Day Free Trial
Related titles
Continue for Free
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
Infrastructu 13/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
3 4.5 ENVIRONMENTAL of 63 CONDITIONS: Download Now Search document
Storage o
Temperature 0 to 40 C o Humidity Maximum 90% at 30 C Operating Conditions: o
Temperature Humidity
4.6
10 to 40 C Upto 75%
ROOM LAYOUT BOARD/BOARDS
APPROVAL
FROM
RE
You're Reading a Preview
Upload yourCOUNTRY’S documents to download. Note: PLEASE REFER TO YOUR RULES AND REGU APPLICABLE TO MEDICAL DIAGNOSTIC X-RAY EQUIPM OR
Become a Scribd member for full access. Your We suggest you to strictly follow the safety standards as applicable in your first 30 days are free. from Electrical, Mechanical & Radiation related hazards. Continue for Free No X-Ray unit shall be commissioned unless the layout of the proposed Xapproved by the competent authority.
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
14/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
3 of 63 Download Now Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
Search document
Inst
5. INSTALLATION PROCEDURE 5.1 INTER CONNECTION WIRING DIAGRAM Do the electrical connections of 325 X-Ray generator as per wiring diagr page. In case of Motorized table, details of electrical connections are gi manual of table.
Related titles
You're Reading a Preview Upload your documents to download.
OR LightSpeed 2.X System Service…
Compressor[1]
Become 325-525 a Scribd memberDifferentiating for full access. Your N161 Between first 30 days are free.Nema…
SIEMENS HEALTHCARE LTD
C
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
ti
f
F
15/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Continue for Free
Search
Download Now
3
of 63
Search document
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
Inst
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
16/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
You're Reading a Preview Upload your documents to download. OR
Become a Scribd member for full access. Your first 30 days are free. 1 - 2 H H P P
Continue for Free
Related titles Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS 325-525 You're reading a preview HEALTHCARE LTD
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
17/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Unlock full access (pages 23-25) by uploading documents or with a 30 Day Free Trial
Search
Download Now
3 of 63 Continue for Free
Search document
Inst
All wires are thimbled and fixed to terminals. Proper strain relief is u as to avoid any disconnections.
All wiring reaching up to the Tank is covered with pipe and coupler
High Voltage Cables are fixed firmly and oil/jelly is put pu t in H.V. Cab
H.V. Cables routed through cable hanger fixed on tank.
Covers are fixed on H.T. Tank and screws are not loose.
H.V. Cable routing with Rotor and LBD Wire is proper.
PVC Tape with buttons is used for H.V. Cable harnessing and r throughout up to the Tube.
H.V. Cables are not lying on floor and cables in no way obstruct the vertical carriage.
Related titles
You're Reading a Preview
H.T. Tank should not be obstructing the column (Round Pipe) move Upload your documents to download. under couch operations. OR
5.3.3 LightSpeed 2.X System Service…
Compressor[1]
Become a Scribd member for full access. Your first 30 days are free. Fluoroscopy/Spot Film Device SIEMENS
325-525
Differentiating
N161
Lead Glass & Fluoroscent screen is seated firmly in place & is not lo Continue for Free HEALTHCARE LTD Between Nema…
Lead Glass is not cracked.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
18/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Download Now
All switches on SFD are functioning properly & their mount Search (Particularly Hand Switches)
The movement of SFD Grid & divider (Two in one) is smooth.
3 Search of 63spring tension isnot The cassette carrier’s toodocument tight.
The cassette carrier’s movement is smooth.
The 14” X 14” frame insertion is smooth & holds the cassettes firml
The change over switch is functioning OK.
SFD/Fluoroscopy mounting on C-Arm is not tilted & is straight. The locks of SFD/Fluoroscopy are engaging properly.
The Tube’s movement for under couch operation is smooth.
Cough Guard & lead flap is present on fluoroscopy/SFD.
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
Inst
LightSpeed 2.X System Service…
Cassette stoppers/exposure position selectors are functioning proper
Movement of the LBD shutters from SFD is OK & switch panel S an appropriate place (not LBD).
The Routing of SFD wires is proper & wires do not entangle with SF
The fluoroscopy/SFD is counter balanced with Tube unit on C-Arm
All screws on assemblies are tight.
All electrical functions of the SFD are working properly.
The LBD’s centre & lead glass centre is matching (Tube with respec
Films taken on SFD do not get cut/overlapped.
X-Ray field as seen on fluoroscent screen does not extend beyon SIEMENS 325-525 Differentiating N161 glass when the LBD shutters are fully open. HEALTHCARE LTD Between Nema…
Related titles
Compressor[1]
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
19/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Download Now
5.3.4
General Checks
Reading General appearance ofYou're machine is clean. a Preview 3
of 63
Search document
Wooden Beam or UUpload channel is painted. your documents to download.
H.V. Cable routing is proper.
Machine parameters are calibrated properly. Become a Scribd member for full access. Your Light & X-Ray beam matches. first 30 days are free. Filter in the Tube head cover is present.
OR
Continue for Freeto Tube Unit. LBD doesn’t move on handling with respect
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.11
Related titles
Search
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
20/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
You're Reading a Preview Upload your documents to download. OR
Become a Scribd member for full access. Your first 30 days are free. Continue for Free
You're reading a preview
Related titles
Unlock full access (pages 29-48) by uploading documents or with a 30 Day Free Trial Continue for Free
8. TROUBLESHOOTING SIEMENS 325-525
LightSpeed 2.X System Service…
Compressor[1]
HEALTHCARE LTD
S.
Fault
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
Possible Reasons for Fau 21/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
No. 1
Symptoms
the mainswitch. Check three-phase supply at
Search Machine does not get ‘ON’
Download Now
3
Check the fuses F1 and F2 (63 Amps HRC Fuses). of 63
Search document
Check input supply 440 volts at Phase-to-Phase ins Check the MCB, it should give continuity during “ Check the continuity at TS11-2 and TS11-3. It sho Check ON/OFF relay whether it is getting “ON” o “ON” check the contacts of ON/OFF relay on Moth Check the contacts of RE1 contactor. This is contactor. All four contacts should give continu Multimeter by pressing its contacts manually. Also On switch. It may be defective.
2
3
Check the voltage compensator switch. Some tim getting “ON” at a particular station the voltage com open at that particular station, to check that selec that step and check the continuity of that parti transformer. This wire may be open from this end. ON/OFF Not Transistor Q4 (CL 100) defective. getting ON at Motherboard Voltmeter Check the three-phase supply at the Main Switch showing half output side. One phase wire may be disconnecte reading missing from the main supply.
Related titles 4
LightSpeed 2.X System Service…
F1, F2 Blowing off while switching ON the machine
Compressor[1]
If 440 Volts input supply to control is available the voltmeter, it may be open at TS1-1. If voltage at the back of voltmeter is 230 V but st half reading that means voltmeter is defective. These fuses F1 & F2 are H.R.C. fuses. These will Amps MCB used in machine is not working MCB Rating 32 Amp. 1 no. Tap or 12 no. Tap of voltage compensat internally or externally. Due to this heavy current w neutral. If MCB is functionally OK then it will trip. If MCB & F2 will blow within seconds.
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
22/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
AllengersSearch 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
Download Now
3
of 63
Search document
5
F3 Blowing while switching ON the machine
F3 fuse is connected in series with all relays, wh AC directly i.e. RE16, RE2, RE6, RE8, and connected in series with Fluoro filament circuit. S to problem in any one of theseorrelays or circur Forsome checking problem in relays particular terminal TS8-6 (230 Volts Supply for all the rela blowing. If fuse is not blowing now, then there is section. Check all the relays coils by disconnectin one. The coil of any relay may be short internally o If all the relays coils are OK then there may be circuit. Check the continuity of TS8-6 & TS10-3 machine. If meter is showing any continuity then 150 w is getting shorted with body of machine. A
LightSpeed 2.X 6 System Service…
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Related titles
getting short with GND this fuse will blow. T TS12-3 from control and check continuity. In case of the machines with I.I.TV combinatio supply or the Trolley supply may be short. To check the camera supply, disconnect the wires 55 (This terminal strip is on the top of the auto tra Volts AC to the input of SMPS or regulated Cam does not blow now, then there is a problem in this s To check the I.I. supply, disconnect wires from TS is 230 Volts AC supply for the I.I.). If I.I. is rated supply will directly go to TS19-3 & TS 19-4. If the DC then this supply will come to TS19-3 & TS19 regulated supply. If the fuse does not blow now, short. To check the trolley supply, disconnect TS6-6 or T not blow now, then trolley supply may short with G Compressor[1] 325-525 Differentiating F4 Blowing SIEMENS off ABS Transformer used in SCR firingN161 Circuit ma HEALTHCARE LTD Between Nema… while switching this disconnect TS 6-2 to bypass the SCR Circuit. ON the machine F4 fuse is connected in series with neutral supp 23/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
working on 230 AC directly i.e. RE16, RE2, RE10. So this fuse will blow to some probl due relays or circuit. For checking problem in relays or particular r SearchSupply documentfor all the of 63 terminal TS8-6 (230Volts rela blowing. If fuse is not blowing now, then there is section. Check all the relays coils by disconnectin one. The coil of any relay may be short internally o In case of the machines with I.I.TV combinatio supply or the Trolley supply may be short. To check the camera supply, disconnect the wires 55 (This terminal strip is on the top of the 12 Volts for the SMPS or for regulated Camera supply). If now then there is a problem in this supply.
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
7
LightSpeed 2.X System Service…
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Related titles
To check the I.I. supply, disconnect wires from TS is 230 Volts AC supply for the I.I.). If I.I. is rated supply will directly go to TS19-3 & TS 19-4. If the DC then this supply will come to TS19-3 & TS19 regulated supply. If the fuse does not blow now, short. To check the trolley supply, disconnect TS6-6 or T not blow now, then trolley supply may short with G Overload Indicator Check F9 fuse (2 Amp). It may be blown. Glowing Timer card may be defective – replace the card. Continuously Over load card may be defective. There may be no supply to the Timer Circuit.For TS7-11 & TS7-12 it should be 24 V AC. Check the thermal contacts at tube and in the cont be open from any side thenN161 the machin Compressor[1] SIEMENS wire may 325-525 Differentiating HEALTHCAREover LTD load. Between Nema… Check any dry soldering on over load chain provid In the case of double tank if the wire A0 is open 24/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
In the case of double tank, if the wire A0 is open control or tank then this problem will occur.
Search
Also check the contacts of RE3 (RE3-A contact is card supply) and RE16 relay (In timer card input su 3 KVP of 63 card problem. Search document at There may be dry solder at the edge connector of K mA connector of Overload Card.
8 Now Permanent Download overload particular station 9 Fuse F8 Blowing while switching ON the Machine or LBD 10 Fuse F7 Blowing off while switching the machine ON or while changing mA station.
12
Related titles
switching ON the Check the coils of RE12, RE14, RE13, RE4, RE7 machine or Ready the relays are 24 V DC relays if the coil of any pressing problem may arise. Any indicator i.e. Over load indicator or X-ray cause this problem. Check all the above indic Multimeter for short circuit. Fuse F11 Blowing Wires for Bucky supply may be touching with grou off while pressing Synchronous Motor drawing heavy current. Chec the Ready switch the Bucky supply. Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
11
Check for grounding of LBD supply wires due to c Check for grounding of LBD supply due to shortin Check for grounding of LBD supply due to shortin Check for Auto cut-off PCB in LBD for shorting o Regulator 7805 used in regulator supply card may b Any of the diodes used (4007) for AC to DC co Also ensure that AC supply at TS17-7 or 17 transformer). It should not be more than 9 V AC. If fuse is still blowing then there may be the possib used in mAs display card is short. To check this, d from main connector & check again for blowing of Fuse F9 Blowing Timer card, Over load card or Flouro Timer C off while disconnect these cards one by one and check blowi
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS
325-525
Differentiating
N161
and when Bucky is Check if the Bucky movement is jamming i.e. grid HEALTHCARE LTD Between Nema… selected IN the not working properly. circuit 0-12 V X-mer winding may be short (only in case
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
25/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
13
table). To check this, disconnect the Bucky supp Search side. Fuse F12 Blowing Rotor winding may be short. document of 63 Search T Check resistance of rotor winding between approximately 30 Ohms for Toshiba tube. Rotor not moving Check whether all the three wires are properly conn while pressing control TS5-1 to 5, TS5-2 to 3, and TS5-3 to 2 Ready switch connection terminals in X-Ray tube on Anode i.e. + Also check the continuity of o f three wires after disco Also check the F9, F6, and F5 fuses. Check whether RE2 relay is is getting “ON” or not. check the RE2 relay contacts RE2-D, RE2–H and R Also check the continuity of current transformers in
Download Now off 14
15
16
3
Fuse F5 Blowing Current transformer may be defective. To check t off when Ready and short this wire with TS14-2. Also short the co switch is pressed rotor circuit. Now check the rotor working. If the r this means that the Current transformer is faul You're Reading a Preview transformer. One winding of Tube Rotor may be short. To che Upload documents and checkyour the working of to thedownload. fuse. Fuse F6 Blowing Any of the two windings of tube may be inter OR off when Ready resistance of tube rotor windings after disconnectin Become a Scribd member for full access. Your switch is pressed side. The value of resistance between different follows: first 30 days are free. I-II : 30 Ohm II-IIIContinue : 91 Ohmfor Free
LightSpeed 2.X System Service…
from 230 V to 70 Check the RE3-A contact whether it is working pro V Check the continuity of TS5-8, 9, 10 respectively w points should show continuity with each other. Check whether RE4 relay coil is OK or not resistance. If RE4 relay is not getting ON even i available then replace the RE4 relay. (Coil resi around 240 Ohms). If RE4325-525 relay is not getting any supplyN161 and RE3 re Compressor[1] SIEMENS Differentiating properly thenBetween there is a problem in timer HEALTHCAREworking LTD Nema…
17
Related titles
I-III : 62 Ohm Any wire I, II, III may be shorted with the bod disconnected from tube side. Rotor voltage does Check if RE3 relay is getting “ON” or not. If no not changeover transformer & RE3 rectifier PCB and RE3 relay co
card with new one. https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
26/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011 3 of 63 Download Now
Search document
18
Rotor gets This may happen due to relay RE3 getting de-en disconnected after RE4 & RE5. Relay RE3 may be de-energized after some time and of RE 3 PCB getting short or open so that RE3
19 20
21
22
Related titles 23
24 LightSpeed 2.X System Service…
not supply properly. Also if the capacitor 25 μF, 440 V in rotor circuit may get de-energized after some time. Bucky IN/OUT IC U6 (MCT 2E 6 pin IC) defective. not working Bucky IN/OUT Switch may be defective. KVP decreasing KVP card may be defective. after pressing Ready switch Exposure starts X-Ray switch may be short in control or in hand sw when Ready is SCR may be short. pressed Rotor is running Check whether relay RE5 is getting ON. If not, ch but no exposure coil it should be 6 V DC. takes place after To achieve 6V, adjust the band of 6.2-Ohm, 10 W pressing X-ray Check RE5 relay coil and RE5-A contact. switch Check RE3A relay coil and RE3-A contact. CheckYou're RE6, RE7, RE8 relays and SCR firing circu Reading a Preview XS, XL, A1 Fuse F3 and F4 may be blown. supplies not Check relay contacts RE10-C & RE14-A. Upload your documents to download. available at control Check for dry soldering on common point of P OR selector switch. Space charge resistance 50 Ohm, 200 W may be op Become a Scribd member for full access. Your XS, XL, A1 Disconnect the –ve cable from H.T. Tank and first days are free.& XL. It should be fro supplies available Common & XS30 and Common at H.T. but SIEMENS Continuity of tube filament XS and XL may Compressor[1] 325-525 Differentiating N161 be brok filament not HEALTHCARESupply LTD Between fromContinue H.T. transformer to filament may be for Free Nema… glowing remove cables from H.T. tank and check voltag voltage is not coming then rectifier diode or tran
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
exposure is taking place
27/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
voltage is not coming, then rectifier diode or tran
H.T. Tank. then If supply voltage is available, continuityof side. 25Now P1- P2 supply not 3 0ofV63supply from Autotransformer or TS1-1 may be Download Search document coming at control Relay RE8 or its contact RE8-A, RE8-B and RE8-C SCR firing relay RE 20 may not be working. Che is OK, then check RE6-A & RE7 contacts in series Dry soldering in SCR firing card. Dry soldering or open connection in Minor or Majo 26 Exposure not Timer chain may be dry solder. terminating after Check value of Timer chain resistance connec pre-set time. Or terminals. It should be 500 k Ohms. Search
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
Troubles
27
28
29 LightSpeed 2.X System Service… 30
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Related titles
Exposure is Timer card may be defective. terminating as per set time upto some time settings but after that continues exposure at all timer setting. Exposure Timer Card may be defective terminating before RE6-C contact not working. or after pre-set Capacitor 33 μF, 40 V mounted in Timer Cad may need to be time Exposure not Transistor BC547 may need to be replaced in timer card. terminating at Check the timer resistance chain on the timer switch. particular time setting No mA outputSIEMENS at Contact of 325-525 kVp switch at that particular station Compressor[1] Differentiating N161 may be particular kVp soldered. HEALTHCARE LTD Between Nema… station. Wire from auto transformer to that particular station may be o mA meter needle Spark gap in H.T mA & GND may be less than 1 mm. 28/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
not deflecting Search mA meter needle overshoots. Or MCB is tripping during exposure. Download Now 31
mA meter may be defective. Check NO Load Current of H.V. Tank i.e. P1 P2 current w removed from H.T. Tank should be less than 1.0 Amp. How to check NO Load current of H.V. Tank:You're Reading 3 i) of 63 Remove H.V. Ca document blSearch ea s fPreview orm H.V. Tank. ii)) ii Putt yo Pu your ur Cl Clam amp p Met Meter er/T /Ton ong g Tes Teste terr aro aroun und d P1 P1 or or P Upload your documents to download. iii) ii i) Make Ma ke and exp expos osur uree at at 60 60 kVP kVP,, 100 100 mA mA,, 1.0 1.0 se sec. c. reading of Clamp meter. meter. It should read less than OR Tube may be gassey. To check this, remove A1 from H.T. T exposure at 100 mA, 60 KVp. If blue light is visible in tub Become a Scribd member for full access. Your gassey. first 30 days free. Cables may be defective. To are check this, remove cables from by one and make exposure at 100 mA, 50 KVp. If mA m overshoot then cables are defective. Continue for Free H.T. tank may be defective. To check this, remove cables f and make exposure at 50 KVp. If mA meter overshoo connection in H.T Tank may be short from inside. Also, NO of H.T. tank i.e. P1 P2 current when cables are removed fr should be less than 1.0 Amps. NO Load Current is OK. i) mA outpu outputt may may be more more hence hence recal recalibr ibrate ate the the machin machine. e. ii) Proble Problem m still still persists persists,, change change MCB with new new one.
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
Pag
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS 325-525 Differentiating HEALTHCARE LTD Between Nema… Check Load Current as mentioned below:-
N161
Troubles
i) At 100 100 mA mA 70 KV, 0.8 sec. = 40 Amp Amp.. Appro Approx. x. ii) At 20 200 0 mA 70 70 KV, 0.8 0.8 sec. sec. = 80 Amp. Amp. Appr Approx. ox. https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
29/34
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
32
Searchhas KVP Display got stuck.
33 Now KVP displaying Download 000 only 34 35
36
37
LBD Bulb getting fused frequently Fluoro/Radio changeover mode not working
39
40
Related titles
Replace IC 7107 in KVP Search document 3 of 63 KVP metering transformer may be defective. Rectifier at output of KVP metering transformer may be defe Connect 2.2 Ohms low value resistance in series with LBD B Fuse F9 may be blown. Toggle Switch or Micro Switch may not be working properly Voltage at TS 7-13 and TS8-7 terminals while Fluoro mode s DC. Voltage at TS 7-13 and TS8-8 terminals should be 24 V. If dropping, check continuity of RE13 & RE14 relay. Check the contacts of Fluoro/Radio mode relay mounted on Card. Replace IC U2 (MCT 2E 6 Pin IC) or IC U4 (4584) in mother IC U4 4584 in motherboard card defective.
Fluoro to Radio or vice versa on pressing Ready You're Reading a Preview switch Fuse F10 Blowing No loadUpload currentyour of H.T. tank is more then 0.80 Amps. At 100 documents to download. during Fluoro Exposure
38
ii) At 200 200 mA 70 70 KV, 0.8 0.8 sec. sec. 80 Amp. Amp. Appr Approx. ox. iii) At 300 mA 60 KV, KV, 0.8 sec. = 120 Amp. Amp. Approx. Approx. Relay contact 2-I may have stuck. Major or Minor KVP switch contact may not be positioned pr
Radio exposure on pressing exposure switch in Fluoro Mode Fluoro/Radio Mode functional but no exposure during Spot Film Double Tank Fuse F-13 Blowing off while switching ON the machine or changing the mode
Tube may be gassey. Fluor mA calibration is OR not correct. Fluoro P1 P2 current KVp should not exceed 3.8 Amps. Micro switcha in SFD member may be pressed Become Scribd for fullcontinuously access. Youror it may b
first 30 days are free. Relay contact RE10-B may not working. Continue for be Free Transistor in Fluoro Timer card may be defective. d efective.
Rectifier PCB for solenoid supply may be short. To check th the rectifier PCB input and check the fuse. Check solenoid coil resistance at C & SU or C & SO with should be between 900 to 1000 Ohms. SU, SO or C wire may be short circuited with GND. Solenoid coil for particular mode may be defective if fuse that particular mode.
4/26/2020
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
Allengers 325 Installation/Service Manual Rev. ‘0’ Eff. Date: 12.02.2011
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
Pag 30/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
You're reading a preview
Unlock full access (pages 56-62) by uploading documents or with a 30 Day Free Trial Continue for Free
Related titles
LightSpeed 2.X System Service…
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
Differentiating Between Nema…
N161
31/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
Download Now
3
of 63
Search document
Reward Your Curiosity Everything you want to read. Anytime. Anywhere. Any device.
Read Free For 30 Days No Commitment. Cancel anytime.
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
32/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Share this document
Search
Download Now
3
of 63
Search document
Related Interests Relay
Series And Parallel Circuits
Radiation Protection
Power Supply
Radiography
Documents Similar To Allengers 325 RF - Installation and Service Ma…
LightSpeed 2.X System Service… M l UPLOADED BY lncoll
Compressor[1]
SIEMENS HEALTHCARE LTD
325-525
UPLOADED BY pereramjp
UPLOADED BY rgandotra
UPLOADED BY Ela Nurlael…
Differentiating Between Nema a… I UPLOADED BY amolnh
N U
More From leopa78
uf_400ax
Finger Pulse Oximeter-2100.pdf
UPLOADED BY leopa78
UPLOADED BY leopa78
Water_Distiller_2012 Marquette_Cardiose Scican_Statim_2000 C _Service_manual.pd _Service_manual.pd H F UPLOADED BY UPLOADED BY UPLOADED BY U leopa78 leopa78 leopa78
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
33/34
4/26/2020
Allengers 325 RF - Installation and Service Manual | Relay | Series And Parallel Circuits
Search
ABOUT
SUPPORT
About Scribd
Download Now Press
Help / FAQ
3
of 63 Accessibility
Our blog
Purchase help
Join our team!
AdChoices
Contact Us
Publishers
Search document
Invite Friends Gi s Scribd for Enterprise
LEGAL
Terms Privacy Copyright
Copyright © 2020 Scribd Inc. . Browse Books . Site Directory . Site Language: English
https://www.scribd.com/document/393236604/Allengers-325-RF-Installation-and-Service-Manual
34/34