28 0 451 KB
Simulation of Part1 Date: Monday, October 23, 2017 Designer: Solidworks Study name: Static 1 Analysis type: Static
Table of Contents Description ............................................ 1 Assumptions .......................................... 2 Model Information ................................... 2 Study Properties ..................................... 3 Units ................................................... 3 Material Properties .................................. 4
Description
Loads and Fixtures................................... 4
No Data
Connector Definitions ............................... 5 Contact Information ................................. 5 Mesh information .................................... 6 Sensor Details ........................................ 7 Resultant Forces ..................................... 7 Beams .................................................. 7 Study Results ......................................... 8 Conclusion .......................................... 10
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
1
Assumptions
Model Information
Model name: Part1 Current Configuration: Default
Solid Bodies Document Name and Reference Cut-Extrude14
Treated As
Solid Body
Analyzed with SOLIDWORKS Simulation
Volumetric Properties
Document Path/Date Modified
Mass:5.1863 kg Volume:0.000673545 m^3 Density:7700 kg/m^3 Weight:50.8257 N
Simulation of Part1
2
Study Properties Study name
Static 1
Analysis type
Static
Mesh type
Solid Mesh
Thermal Effect:
On
Thermal option
Include temperature loads
Zero strain temperature
298 Kelvin
Include fluid pressure effects from SOLIDWORKS Flow Simulation Solver type
Off
Inplane Effect:
Off
Soft Spring:
Off
Inertial Relief:
Off
Incompatible bonding options
Automatic
Large displacement
Off
Compute free body forces
On
Friction
Off
Use Adaptive Method:
Off
Result folder
SOLIDWORKS document (c:\users\bandun~1\appdata\local\temp)
FFEPlus
Units Unit system:
SI (MKS)
Length/Displacement
mm
Temperature
Kelvin
Angular velocity
Rad/sec
Pressure/Stress
N/m^2
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
3
Material Properties Model Reference
Properties Name: Model type: Default failure criterion: Yield strength: Tensile strength: Elastic modulus: Poisson's ratio: Mass density: Shear modulus: Thermal expansion coefficient:
Components
Alloy Steel Linear Elastic Isotropic Max von Mises Stress
SolidBody 1(CutExtrude14)(Part1)
6.20422e+008 N/m^2 7.23826e+008 N/m^2 2.1e+011 N/m^2 0.28 7700 kg/m^3 7.9e+010 N/m^2 1.3e-005 /Kelvin
Curve Data:N/A
Loads and Fixtures Fixture name
Fixture Image
Fixture Details Entities: Type:
1 face(s) Fixed Geometry
Fixed-1
Resultant Forces Components Reaction force(N) Reaction Moment(N.m)
Load name
X -0.000461817 0
Load Image
Y -0.631044 0
Z -33.4053 0
Load Details Entities: Type: Value:
Force-1
Analyzed with SOLIDWORKS Simulation
Resultant 33.4112 0
4 face(s) Apply normal force -128 N
Simulation of Part1
4
Connector Definitions No Data
Contact Information No Data
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
5
Mesh information Mesh type
Solid Mesh
Mesher Used:
Standard mesh
Automatic Transition:
Off
Include Mesh Auto Loops:
Off
Jacobian points
4 Points
Element Size
8.76788 mm
Tolerance
0.438394 mm
Mesh Quality Plot
High
Mesh information - Details Total Nodes
11201
Total Elements
6901
Maximum Aspect Ratio
5.4869
% of elements with Aspect Ratio < 3
99.5
% of elements with Aspect Ratio > 10
0
% of distorted elements(Jacobian)
0
Time to complete mesh(hh;mm;ss):
00:00:02
Computer name:
BANDUNGNMAX-PC
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
6
Sensor Details No Data
Resultant Forces Reaction forces Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Model
N
-0.000461817
-0.631044
-33.4053
33.4112
Reaction Moments Selection set
Units
Sum X
Sum Y
Sum Z
Resultant
Entire Model
N.m
0
0
0
0
Beams No Data
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
7
Study Results Name
Type
Min
Max
Stress1
VON: von Mises Stress
5.796e+001N/m^2 Node: 9515
6.705e+005N/m^2 Node: 10493
Part1-Static 1-Stress-Stress1
Name
Type
Min
Max
Displacement1
URES: Resultant Displacement
0.000e+000mm Node: 101
5.848e-004mm Node: 232
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
8
Part1-Static 1-Displacement-Displacement1
Name
Type
Min
Max
Strain1
ESTRN: Equivalent Strain
5.701e-010 Element: 2830
2.202e-006 Element: 3615
Part1-Static 1-Strain-Strain1
Name
Type
Displacement1{1}
Deformed shape
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
9
Part1-Static 1-Displacement-Displacement1{1}
Conclusion
Analyzed with SOLIDWORKS Simulation
Simulation of Part1
10